Refine
Language
- English (36)
Is part of the Bibliography
- yes (36)
Keywords
- erosion (4)
- seismic monitoring (3)
- 2008 Wenchuan earthquake (2)
- HVSR (2)
- correlation (2)
- environmental seismology (2)
- fatigue (2)
- floodplains (2)
- fundamental frequency (2)
- mass (2)
Graphite forms the endpoint for organic carbon metamorphism; it is extremely resilient to physical, biological and chemical degradation. Carbonaceous materials (CM) contained within sediments, collected across Taiwan and from the Gaoping submarine canyon, were analyzed using Raman spectroscopy to determine the crystallinity. This allowed the erosional and orogenic movements of petrogenic organic carbon (OCpetro) during the Taiwanese orogeny to be deduced. After automatically fitting and classifying spectra, the distribution of four groups of CM within the sediments provides evidence that many forms of OCpetro have survived at least one previous cycle of erosion, transport and burial before forming rocks in the Western Foothills of the island. There is extensive detrital graphite present in rocks that have not experienced high-grade metamorphism, and graphite flakes are also found in recently deposited marine sediments off Taiwan. The tectonic and geological history of the island shows that these graphite flakes must have survived at least three episodes of recycling. Therefore, transformation to graphite during burial and orogeny is a mechanism for stabilizing organic carbon over geological time, removing biospheric carbon from the active carbon cycle and protecting it from oxidation during future erosion events.
Water stable isotope ratios of tropical precipitation predominantly reflect moisture source and precipitation intensity. Trees can incorporate the isotopic signals into annual tree-ring cellulose records, permitting reconstruction of the temporal changes of hydroclimate over decades to millennia. This is especially valuable in the Himalayas where the understanding of monsoon dynamics is limited by the lack of a dense and representative observational network. We have analyzed tree ring delta O-18 records from two distinct physiographic sites along the upper Kali Gandaki valley in the central Nepal Himalayas, representing the wet High-Himalayas and the Trans-Himalayan dryland to the north. Empirical correlations and regression analyses were compared to an in-situ calibrated oxygen isotope fractionation model, exploring the relationships between tree ring delta O-18 and seasonal-mean variability of hydroclimatic forcing at the different locations. For this purpose, gridded precipitation data from the Asian rain gauge dataset APHRODITE, as well as high resolution onsite observations (relative humidity, air temperature, delta O-18 of precipitation and radial tree growth) were used. We found that two distinct sets of meteorological values, reflecting pre-monsoon and monsoon conditions, are needed to reproduce the measured tree ring delta O-18 values from the High-Himalayan site, but that a single set of monsoonal values performs best for the Trans-Himalayan site. We conclude that Trans-Himalayan trees capture long-term changes in strength of the Indian summer monsoon. In contrast, High-Himalayan tree ring delta(18)Orecords a more complex hydro-climatic signal reflecting both pre-monsoon and monsoon seasons with very contrasting isotopic signatures of precipitation. This difference in the two hydroclimatic proxy records offers an opportunity to reconstruct first-order hydroclimate conditions, such as local precipitation rates, and to gain new insights into monsoon timing and seasonal water source determination across the Himalayan orographic region. (C) 2019 Elsevier B.V. All rights reserved.
Erosion and tectonic uplift are widely thought to be coupled through feedbacks involving orographic precipitation, relief development, and crustal weakening. In many orogenic systems, it can be difficult to distinguish whether true feedbacks exist, or whether observed features are a consequence of tectonic forcing. To help elucidate these interactions, we examine Gongga Shan, a 7556 m peak on the eastern margin of the Tibetan Plateau where cosmogenic Be-10 basin-wide erosion rates reach >5 mm/yr, defining a region of localized rapid erosion associated with a restraining bend in the left-lateral Xianshuihe Fault. Erosion rates are consistent with topography, thermochronometry, and geodetic data, suggesting a stable pattern of uplift and exhumation over at least the past 2-3 My. Transpression along the Xianshuihe Fault, orographically enhanced precipitation, thermally weakened crust, and substantial local relief all developed independently in the Gongga region and existed there prior to the uplift of Gongga Shan. However, only where all of these conditions are present do the observed topographic and erosional extremes exist, and their relative timing indicates that these conditions are not a consequence of rapid uplift. We conclude that their collocation at 3-4 Ma set into motion a series of feedbacks between erosion and uplift that has resulted in the exceptionally high topography and rapid erosion rates observed today.
Mountain channels can be strongly coupled with adjacent hillslopes, exchanging both mass and energy. However, hypotheses of the underlying cause and effect relations are based on indirect observations that do not resolve the mechanics of channel-hillslope coupling at the process scale. Here we present direct observational data of a coupled channel-hillslope system in the catchment area of the Erlenbach, a mountain stream in Switzerland. A slow-moving landslide flanking this alpine stream failed after a flood had eroded an alluvial step in the channel at its base, representing evidence for an upsystem link in channel-hillslope coupling. Progressive accumulation of landslide debris in the channel resulted in a renewed step, stabilizing the hillslope and restoring the channel step in a downsystem link. Thus, upsystem and downsystem coupling mechanisms are joined in a negative feedback cycle. In this cycle, debuttressing and rebuttressing due to channel bed erosion and alluviation are the dominant controls on hillslope stability. Based on an order of magnitude estimate it is plausible that the observed feedback mechanism is a relevant process in the production of coarse (>2 mm) sediment in the Erlenbach.
Width control on event-scale deposition and evacuation of sediment in bedrock-confined channels
(2020)
In mixed bedrock-alluvial rivers, the response of the system to a flood event can be affected by a number of factors, including coarse sediment availability in the channel, sediment supply from the hillslopes and upstream, flood sequencing and coarse sediment grain size distribution. However, the impact of along-stream changes in channel width on bedload transport dynamics remains largely unexplored. We combine field data, theory and numerical modelling to address this gap. First, we present observations from the Daan River gorge in western Taiwan, where the river flows through a 1 km long 20-50 m wide bedrock gorge bounded upstream and downstream by wide braidplains. We documented two flood events during which coarse sediment evacuation and redeposition appear to cause changes of up to several metres in channel bed elevation. Motivated by this case study, we examined the relationships between discharge, channel width and bedload transport capacity, and show that for a given slope narrow channels transport bedload more efficiently than wide ones at low discharges, whereas wider channels are more efficient at high discharges. We used the model sedFlow to explore this effect, running a random sequence of floods through a channel with a narrow gorge section bounded upstream and downstream by wider reaches. Channel response to imposed floods is complex, as high and low discharges drive different spatial patterns of erosion and deposition, and the channel may experience both of these regimes during the peak and recession periods of each flood. Our modelling suggests that width differences alone can drive substantial variations in sediment flux and bed response, without the need for variations in sediment supply or mobility. The fluctuations in sediment transport rates that result from width variations can lead to intermittent bed exposure, driving incision in different segments of the channel during different portions of the hydrograph.
Rivers transfer particulate organic carbon (POC) from eroding mountains into geological sinks. Organic carbon source composition and selective mobilization have been shown to affect the type and quantity of POC export, but their combined effects across complex mountain ranges remain underexplored. Here, we examine the variation in organic carbon sourcing and transport in the trans-Himalayan Kali Gandaki River catchment, along strong gradients in precipitation, rock type and vegetation. Combining bulk stable nitrogen, and stable and radioactive organic carbon isotopic composition of bedrock, litter, soil and river sediment samples with a Bayesian end-member mixing approach, we differentiate POC sources along the river and quantify their export. Our analysis shows that POC export from the Tibetan segment of the catchment, where carbon bearing shales are partially covered by aged and modern soils, is dominated by petrogenic POC. Based on our data we re-assess the presence of aged biospheric OC in this part of the catchment, and its contribution to the river load. In the High Himalayan segment, we observed low inputs of petrogenic and biospheric POC, likely due to very low organic carbon concentrations in the metamorphic bedrock, combined with erosion dominated by deep-seated landslides. Our findings show that along the Kali Gandaki River, the sourcing of sediment and organic carbon are decoupled, due to differences in rock organic carbon content, soil and above ground carbon stocks, and geomorphic process activity. While the fast eroding High Himalayas are the principal source of river sediment, the Tibetan headwaters, where erosion rates are lower, are the principal source of organic carbon. To robustly estimate organic carbon export from the Himalayas, the mountain range should be divided into tectono-physiographic zones with distinct organic carbon yields due to differences in substrate and erosion processes and rates.
Oxidation of particulate organic carbon (POC) during fluvial transit releases CO2 to the atmosphere and can influence global climate. Field data show large POC oxidation fluxes in lowland rivers; however, it is unclear if POC losses occur predominantly during in-river transport, where POC is in continual motion within an aerated environment, or during transient storage in floodplains, which may be anoxic. Determination of the locus of POC oxidation in lowland rivers is needed to develop process-based models to predict POC losses, constrain carbon budgets, and unravel links between climate and erosion. However, sediment exchange between rivers and floodplains makes differentiating POC oxidation during in-river transport from oxidation during floodplain storage difficult. Here, we isolated inriver POC oxidation using flume experiments transporting petrogenic and biospheric POC without floodplain storage. Our experiments showed solid phase POC losses of 0%-10% over similar to 10(3) km of fluvial transport, compared to similar to 7% to >50% losses observed in rivers over similar distances. The production of dissolved organic carbon (DOC) and dissolved rhenium (a proxy for petrogenic POC oxidation) was consistent with small POC lasses, and replicate experiments in static water tanks gave similar results. Our results show that fluvial sediment transport, particle abrasion, and turbulent mixing have a minimal role on POC oxidation, and they suggest that POC losses may accrue primarily in floodplain storage.
The large, shallow earthquakes at Northridge, California (1994), Chi-Chi, Taiwan (1999), and Wenchuan, China (2008), each triggered thousands of landslides. We have determined the position of these landslides along hillslopes, normalizing for statistical bias. The landslide patterns have a co-seismic signature, with clustering at ridge crests and slope toes. A cross-check against rainfall-induced landslide inventories seems to confirm that crest clustering is specific to seismic triggering as observed in previous studies. In our three study areas, the seismic ground motion parameters and lithologic and topographic features used do not seem to exert a primary control on the observed patterns of landslide clustering. However, we show that at the scale of the epicentral area, crest and toe clustering occur in areas with specific geological features. Toe clustering of seismically induced landslides tends to occur along regional major faults. Crest clustering is concentrated at sites where the lithology along hillslopes is approximately uniform, or made of alternating soft and hard strata, and without strong overprint of geological structures. Although earthquake-induced landslides locate higher on hillslopes in a statistically significant way, geological features strongly modulate the landslide position along the hillslopes. As a result the observation of landslide clustering on topographic ridges cannot be used as a definite indicator of the topographic amplification of ground shaking.
Presentation and Analysis of a Worldwide Database of Earthquake-Induced Landslide Inventories
(2017)
Earthquake-induced landslide (EQIL) inventories are essential tools to extend our knowledge of the relationship between earthquakes and the landslides they can trigger. Regrettably, such inventories are difficult to generate and therefore scarce, and the available ones differ in terms of their quality and level of completeness. Moreover, access to existing EQIL inventories is currently difficult because there is no centralized database. To address these issues, we compiled EQIL inventories from around the globe based on an extensive literature study. The database contains information on 363 landslide-triggering earthquakes and includes 66 digital landslide inventories. To make these data openly available, we created a repository to host the digital inventories that we have permission to redistribute through the U.S. Geological Survey ScienceBase platform. It can grow over time as more authors contribute their inventories. We analyze the distribution of EQIL events by time period and location, more specifically breaking down the distribution by continent, country, and mountain region. Additionally, we analyze frequency distributions of EQIL characteristics, such as the approximate area affected by landslides, total number of landslides, maximum distance from fault rupture zone, and distance from epicenter when the fault plane location is unknown. For the available digital EQIL inventories, we examine the underlying characteristics of landslide size, topographic slope, roughness, local relief, distance to streams, peak ground acceleration, peak ground velocity, and Modified Mercalli Intensity. Also, we present an evaluation system to help users assess the suitability of the available inventories for different types of EQIL studies and model development.
Prediction of the area affected by earthquake-induced landsliding based on seismological parameters
(2017)
We present an analytical, seismologically consistent expression for the surface area of the region within which most landslides triggered by an earthquake are located (landslide distribution area). This expression is based on scaling laws relating seismic moment, source depth, and focal mechanism with ground shaking and fault rupture length and assumes a globally constant threshold of acceleration for onset of systematic mass wasting. The seismological assumptions are identical to those recently used to propose a seismologically consistent expression for the total volume and area of landslides triggered by an earthquake. To test the accuracy of the model we gathered geophysical information and estimates of the landslide distribution area for 83 earthquakes. To reduce uncertainties and inconsistencies in the estimation of the landslide distribution area, we propose an objective definition based on the shortest distance from the seismic wave emission line containing 95% of the total landslide area. Without any empirical calibration the model explains 56% of the variance in our dataset, and predicts 35 to 49 out of 83 cases within a factor of 2, depending on how we account for uncertainties on the seismic source depth. For most cases with comprehensive landslide inventories we show that our prediction compares well with the smallest region around the fault containing 95% of the total landslide area. Aspects ignored by the model that could explain the residuals include local variations of the threshold of acceleration and processes modulating the surface ground shaking, such as the distribution of seismic energy release on the fault plane, the dynamic stress drop, and rupture directivity. Nevertheless, its simplicity and first-order accuracy suggest that the model can yield plausible and useful estimates of the landslide distribution area in near-real time, with earthquake parameters issued by standard detection routines.