Refine
Year of publication
Document Type
- Article (58)
- Postprint (4)
- Doctoral Thesis (1)
- Review (1)
Language
- English (64)
Is part of the Bibliography
- yes (64)
Keywords
- exhumation (7)
- thermochronology (6)
- Pamir (5)
- Thermochronology (4)
- Puna Plateau (3)
- Tien Shan (3)
- Apatite (U-TH)/HE (2)
- Big Naryn complex (2)
- Cenozoic (2)
- Central Myanmar Basin (2)
Institute
The Issyk-Kul Basin (Kyrgyzstan), situated in the central Tian Shan Mountains, hosts the largest and deepest mountain lake in Central Asia. Erosion of the surrounding Terskey and Kungey ranges led to the accumulation of up to 4 km of sediment in the adjacent depression. Creation of the basin from regional shortening and uplift likely initiated around the Oligocene-Miocene, yet precise age control is sparse. To better understand the timing of these processes, we obtained magnetostratigraphic age constraints on fossil-poor, fluvio-lacustrine sediments exposed south of Lake Issyk-Kul, that agree well with previous age constraints of the equivalent strata outside the Issyk-Kul Basin. Two 500-650 m thick sections comprised mainly of Chu Group sediments were dated at 6.3-2.8 Ma and 7.0-2.4 Ma (late Miocene to early Pleistocene). Together with reinterpreted magnetostratigraphic constraints from underlying strata, we find that syn-tectonic deposition commenced at similar to 22 Ma with average sedimentation rates <10 cm/ka. Sedimentation rates increased to 10-30 cm/ka at 7 Ma, concurrent with accelerated uplift in the Terskey Range to the south. A deformation event in one section (Kaji-Say) between 5 and 3 Ma together with concurrent shifts of depositional centers throughout the basin signal the onset of substantial uplift of the Kungey Range to the north at similar to 5 Ma. This uplift and deformation transformed the Issyk-Kul area into a closed basin that facilitated the formation of a deep lake. Lacustrine facies deposited around 3 Ma mark the existence of Lake Issyk-Kul by that time.
The Indus Molasse records orogenic sedimentation associated with uplift and erosion of the southern margin of Asia in the course of ongoing India-Eurasia collision. Detailed field investigation clarifies the nature and extent of the depositional contact between this molasse and the underlying basement units. We report the first dataset on detrital zircon U-Pb ages, Hf isotopes and apatite U-Pb ages for the autochthonous molasse in the Indus Suture Zone. A latest Oligocene depositional age is proposed on the basis of the youngest detrital zircon U-Pb age peak and is consistent with published biostratigraphic data. Multiple provenance indicators suggest exclusively northerly derivation with no input from India in the lowermost parts of the section. The results provide constraints on the uplift and erosion history of the Ladakh Range following the initial India-Asia collision.
Marked along-strike changes in stratigraphy, mountain belt morphology, basement exhumation, and deformation styles characterize the Andean retroarc; these changes have previously been related to spatiotemporal variations in the subduction angle. We modeled new apatite fission track and apatite (U-Th-Sm)/He data from nine ranges located between 26 degrees S and 28 degrees S. Using new and previously published data, we constructed a Cretaceous to Pliocene paleogeographic model that delineates a four-stage tectonic evolution: extensional tectonics during the Cretaceous (120-75 Ma), the formation of a broken foreland basin between 55 and 30 Ma, reheating due to burial beneath sedimentary rocks (18-13 Ma), and deformation, exhumation, and surface uplift during the Late Miocene and the Pliocene (13-3 Ma). Our model highlights how preexisting upper plate structures control the deformation patterns of broken foreland basins. Because retroarc deformation predates flat-slab subduction, we propose that slab anchoring may have been the precursor of Eocene-Oligocene compression in the Andean retroarc. Our model challenges models which consider broken foreland basins and retroarc deformation in the NW Argentinian Andes to be directly related to Miocene flat subduction.
Understanding the geologic evolution of Northern Tibetan Plateau with multiple thermochronometers
(2018)
The early onset of deformation following the India-Asia collision, Neogene expanse of uplift, and complex systems that comprise strike-slip faults, thrust faults, and intermontane basins characterize the Cenozoic tectonism of Northern Tibetan Plateau and raise two prominent questions in orogenic geodynamics: 1) What mechanism(s) control(s) the transfer of stress related to the India-Asia collision across the distance of >2000 km; and 2) Why the development of high topography was delayed in the Northern Tibetan Plateau and what does it reveal about how the internal forces and external boundary conditions evolved. To address these two questions, we reconstruct a holistic spatial-temporal deformation history of the Northern Tibetan Plateau by using a range of thermochronometers, with closure temperature spanning from 350 degrees C to-60-70 degrees C. This multi-thermochronometer study reveals three stages of faulting related cooling, in the early Cretaceous, in Paleocene-Eocene and in middle-late Miocene. We observe that Paleocene-Eocene deformation was spatially restricted and mostly occurred on reactivated Cretaceous structures, indicating a control of pre-existing weakness on early Cenozoic deformation. Extensive Neogene deformation contrasts with restricted Paleocene-Eocene deformation and relatively quiescent shortening during the Oligocene-early Miocene, which implies a change in the regional tectonics regime. Global plate reconstructions show that this tectonic reorganization is coeval with an increase in Pacific-Asia plate convergence rates. We argue that this change in regional tectonics is a result of increasing constrictive environment of the eastern plate boundary, which changed the behavior of the Altyn Tagh fault the boundary fault of Northern Tibetan Plateau, causing it to change from feeding slip into structures out of the plateau to feeding slip into structures at plateau margins.
Despite remarkable tectonostratigraphic similarities along the Himalayan arc, pronounced topographic and exhumational variability exists in different morphotectonic segments. The processes responsible for this segmentation are debated. Of particular interest is a 30- to 40-km-wide orogen-parallel belt of rapid exhumation that extends from central Nepal to the western Himalaya and its possible linkage to a midcrustal ramp in the basal decollement, and the related growth of Lesser Himalayan duplex structures. Here we present 26 new apatite fission track cooling ages from the Beas-Lahul region, at the transition from the Central to the Western Himalaya (77 degrees-78 degrees E) to investigate segmentation in the Himalayan arc from a thermochronologic perspective. Together with previously published data from this part of the orogen, we document significant lateral changes in exhumation between the Dhauladar Range to the west, the Beas-Lahul region, and the Sutlej area to the east of the study area. In contrast to the Himalayan front farther east, exhumation in the far western sectors is focused at the frontal parts of the mountain range and associated with the hanging wall of the Main Boundary Thrust fault ramp. Our results allow us to spatially correlate the termination of the rapid exhumation belt with a midcrustal ramp to the west. We suggest that a plunging anticline at the northwestern edge of the Larji-Kullu-Rampur window represents the termination of the Central Himalayan segment, which is related to the evolution of the Lesser Himalayan duplex. Key Points
The Kohat and Potwar fold thrust belts (KP-FTB) in Pakistan exhibit structural variations over 250 km along strike within the Himalayan fold and thrust system. Our 3D deformation model shows that Kohat surface structures evolved above an active roof thrust in Eocene evaporites. The ramp-forming duplexes in the Kohat were stacked and passively transported toward the foreland above new ramps, resulting in up to 5 km of thickening between the two decollements. Ramps from the Kohat extend into the Potwar as thrust tips of fault propagation folds. The basement slope changes from flat (beta < 1 degrees) below the northern part to north-dipping (beta > 1 degrees) below the southern part, corresponding to the change in structural style and complexity of the KP-FTB. The Kalabagh Fault Zone, linking the two belts, is interpreted as a zone of complex dextral strike-slip rotational faulting. Salt expulsed from the hanging walls of normal faults and under synclines in the Kalabagh Fault Zone moved toward the footwall of normal faults, accumulated in the cores of anticlines, and formed lobe structures at the deformation front. The fundamental reasons for the variable structural styles are changes in decollement strength, basement slope, preexisting normal faulting, presence of a secondary decollement and spatially-variable salt mobility and accumulation.
Marked along-strike changes in stratigraphy, mountain belt morphology, basement exhumation, and deformation styles characterize the Andean retroarc; these changes have previously been related to spatiotemporal variations in the subduction angle. We modeled new apatite fission track and apatite (U-Th-Sm)/He data from nine ranges located between 26 degrees S and 28 degrees S. Using new and previously published data, we constructed a Cretaceous to Pliocene paleogeographic model that delineates a four-stage tectonic evolution: extensional tectonics during the Cretaceous (120-75 Ma), the formation of a broken foreland basin between 55 and 30 Ma, reheating due to burial beneath sedimentary rocks (18-13 Ma), and deformation, exhumation, and surface uplift during the Late Miocene and the Pliocene (13-3 Ma). Our model highlights how preexisting upper plate structures control the deformation patterns of broken foreland basins. Because retroarc deformation predates flat-slab subduction, we propose that slab anchoring may have been the precursor of Eocene-Oligocene compression in the Andean retroarc. Our model challenges models which consider broken foreland basins and retroarc deformation in the NW Argentinian Andes to be directly related to Miocene flat subduction.
The Permo-Triassic period marks the time interval between Hercynian (Variscan) orogenic events in the Tien Shan and the North Pamir, and the Cimmerian accretion of the Gondwana-derived Central and South Pamir to the southern margin of the Paleo-Asian continent. A well-preserved Permo-Triassic volcano-sedimentary sequence from the Chinese North Pamir yields important information on the geodynamic evolution of Asia’s pre-Cimmerian southern margin. The oldest volcanic rocks from that section are dated to the late Guadalupian epoch by a rhyolite and a dacitic dike that gave zircon U-Pb ages of ~260 Ma. Permian volcanism was largely pyroclastic and mafic to intermediate. Upsection, a massive ignimbritic crystal tuff in the Chinese Qimgan valley was dated to 244.1 +/- 1.1 Ma, a similar unit in the nearby Gez valley to 245 +/- 11 Ma, and an associated rhyolite to 233.4 +/- 1.1 Ma. Deposition of the locally ~200 m thick crystal tuff unit follows an unconformity and marks the onset of intense, mainly mafic to intermediate, calc-alkaline magmatic activity. Triassic volcanic activity in the North Pamir was coeval with the major phase of Cimmerian intrusive activity in the Karakul-Mazar arc-accretionary complex to the south, caused by northward subduction of the Paleo-Tethys. It also coincided with the emplacement of basanitic and carbonatitic dikes and a thermal event in the South Tien Shan, to the north of our study area. Evidence for arc-related magmatic activity in a back-arc position provides strong arguments for back-arc extension or transtension and basin formation. This puts the Qimgan succession in line with a more than 1000 km long realm of extensional Triassic back-arc basins known from the North Pamir in the Kyrgyz Altyn Darya valley (Myntekin formation), the North Pamir of Tajikistan and Afghanistan, and the Afghan Hindukush (Doab formation) and further west from the Paropamisus and Kopet Dag (Aghdarband, NE Iran).
The arid Puna plateau of the southern Central Andes is characterized by Cenozoic distributed shortening forming intramontane basins that are disconnected from the humid foreland because of the defeat of orogen-traversing channels. Thick Tertiary and Quaternary sedimentary fills in Puna basins have reduced topographic contrasts between the compressional basins and ranges, leading to a typical low-relief plateau morphology. Structurally identical basins that are still externally drained straddle the eastern border of the Puna and document the eastward propagation of orographic barriers and ensuing aridification. One of them, the Angastaco basin, is transitional between the highly compartmentalized Puna highlands and the undeformed Andean foreland. Sandstone petrography, structural and stratigraphic analysis, combined with detrital apatite fission-track thermochronology from a similar to 6200-m-thick Miocene to Pliocene stratigraphic section in the Angastaco basin, document the late Eocene to late Pliocene exhumation history of source regions along the eastern border of the Puna (Eastern Cordillera (EC)) as well as the construction of orographic barriers along the southeastern flank of the Central Andes. Onset of exhumation of a source in the EC in late Eocene time as well as a rapid exhumation of the Sierra de Luracatao (in the EC) at about 20 Ma are recorded in the detrital sediments of the Angastaco basin. Sediment accumulation in the basin began similar to 15 Ma, a time at which the EC had already built sufficient topography to prevent Puna sourced detritus from reaching the basin. After similar to 13 Ma, shortening shifted eastward, exhuming ranges that preserve an apatite fission-track partial annealing zone recording cooling during the late Cretaceous rifting event. Facies changes and fossil content suggest that after 9 Ma, the EC constituted an effective orographic barrier that prevented moisture penetration into the plateau. Between 3.4 and 2.4 Ma, another orographic barrier was uplifted to the east, leading to further aridification and pronounced precipitation gradients along the mountain front. This study emphasizes the important role of tectonics in the evolution of climate in this part of the Andes
The temperature range of the apatite fission-track partial annealing zone (PAZ) varies as a function of the kinetic characteristics of the apatite crystal as well as the cooling rate. These kinetic characteristics are controlled largely by the chemical composition of the apatites; fission-track etch pit diameter (D-par) has been shown to be a proxy for quantifying these characteristics. Since some annealing models explicitly use D-par as a kinetic indicator, the question of whether D-par varies according to either operator variability or etching conditions has serious implications. The influence of etching conditions includes both minor variations in temperature and etch time as well as larger variations between the three popular concentrations of nitric acid that are presently in use within the fission- track community: 5 and 5.5 M HNO3 at 21 degrees C for 20 s, and 1.6 M (7 vol.%) HNO3 at 21 degrees C for 45 or 50 s. We have conducted a systematic study of D-par in two widely used apatite age standards: Durango and Fish Canyon Tuff (FCT). Samples were analyzed by at least 2 operators in 2 laboratories; over 15,000 etch pits were measured. Operator imprecision is small compared to other effects both within and between operators. The measured D-par parameters depend primarily on etching conditions including concentration of etchant, and the time and temperature of etching. D-par size increases linearly with time but non-linearly with temperature. Differences between D-par size of Durango and FCT are significantly smaller for the 1.6 M etch compared to the other two etches, implying that the weak etch has less resolving power for D-par measurements. In addition, when etching conditions are changed, confined track lengths for different apatite compositions and D-par values co-vary in a complex fashion. Therefore, the 5 or 5.5 M etch is recommended for studies that employ D-par as a proxy for chemistry; the 1.6 M etch and other weak etches are not recommended. We propose a linear correction for D-par based on measuring D-par in two widely available AFT age standards, Durango and FCT, and cross-plotting the results with those obtained by R. Donelick. The slope of the resulting curve, which passes through the origin, provides a correction factor. This system yields reasonably good corrected values for 3 test samples using the 5 M and 5.5 M HNO3 etches.
Foreland basin development in the Andes of central Colombia has been suggested to have started in the Late Cretaceous through tectonic loading of the Central Cordillera. Eastward migration of the Cenozoic orogenic front has also been inferred from the foreland basin record west of the Eastern Cordillera. However, farther east, limited data provided by foreland basin strata and the adjacent Eastern Cordillera complicate any correlation among mountain building, exhumation, and foreland basin sedimentation. In this study, we present new data from the Medina Basin in the eastern foothills of the Eastern Cordillera of Colombia. We report sedimentological data and palynological ages that link an eastward-thinning early Oligocene to early Miocene syntectonic wedge containing rapid facies changes with an episode of fast tectonic subsidence starting at ca. 31 Ma. This record may represent the first evidence of topographic loading generated by slip along the principal basement-bounding thrusts in the Eastern Cordillera to the southwest of the basin. Zircon fission-track ages and paleo-current analysis reveal the location of these thrust loads and illustrate a time lag between the sedimentary signal of topographic loading and the timing of exhumation (ca. 18 Ma). This lag may reflect the period between the onset of range uplift and significant removal of overburden. Vitrinite reflectance data document northward along-strike propagation of the deformation front and folding of the Oligocene syntectonic wedge. This deformation was coupled with a nonuniform incorporation of the basin into the wedge-top depozone. Thus, our data set constitutes unique evidence for the early growth and propagation of the deformation front in the Eastern Cordillera, which may also improve our understanding of spatiotemporal patterns of foreland evolution in other mountain belts.
New thermochronometric data from the Eastern Cordillera of the Colombian Andes reveal diachronous exhumation associated with Cenozoic contractional deformation in this sector of the northern Andes. We present a comprehensive account of exhumation patterns along a 150-km-long, across-strike transect between similar to 4 degrees and 6 degrees N by integrating 29 new apatite fission track (AFT) ages and 17 new zircon fission track (ZFT) ages with sparse published thermochronological data from this area. Our data reveal episodic eastward migration of the orogenic front at an average rate of 2.5-2.7 mm/a during the Late Cretaceous-Cenozoic. We identify three major stages of orogen propagation: (1) slow propagation (0.5-3.1 mm/a) until early Eocene; (2) rapid orogenic advance (4.0-18.0 mm/a) during middle-late Eocene, which accounts for similar to 86% of the orogen's present width; and (3) slow orogen propagation (1.2-2.1 mm/a) from Oligocene to Holocene times. Our data demonstrate that in the course of changes in plate kinematics, the presence of inherited crustal anisotropies, such as the former rift-bounding faults of the Eastern Cordillera, favor a nonsystematic progression of foreland basin deformation through time by preferentially concentrating accommodation of slip and thrust loading along these zones of weakness.
In the Himalaya of Chamba, NW India, a major orographic barrier in front of the Greater Himalayan Range extracts a high proportion of the monsoonal rainfall along its southern slopes and effectively shields the orogen interior from moisture-bearing winds. Along a similar to 100-km-long orogen perpendicular transect, 28 new apatite fission track (AFT) and 30 new zircon (U-Th)/He (ZHe) cooling ages reveal marked variations in age distributions and long-term exhumation rates between the humid frontal range and the semi-arid orogen interior. On the southern topographic front, very young, elevation-invariant AFT ages of <4 Ma have been obtained that are concentrated in a similar to 30-km-wide zone; 1-D-thermal modeling suggests a Plio-Pleistocene mean erosion rate of 0.8-1.9 mm yr(-1). In contrast, AFT and ZHe ages within the orogen interior are older (4-9 and 7-18 Ma, respectively), are positively correlated with sample elevation, and yield lower mean erosion rates (0.3-0.9 mm yr(-1)). Protracted low exhumation rates within the orogen interior over the last similar to 15 Myr prevailed contemporaneously with overall humid conditions and an effective erosional regime within the southern Himalaya. This suggests that the frontal Dhauladar Range was sufficiently high during this time to form an orographic barrier, focusing climatically enhanced erosional processes and tectonic deformation there. Thrusting along the two frontal range-bounding thrust, the Main Central Thrust and the Main Boundary Thrusts, was initiated at least similar to 15 Ma ago and has remained localized since then. The lack of evidence for localized uplift farther north indicates either a rather flat decollement with no ramp or the absence of active duplex systems beneath the interior of Chamba. Exhumational variability within Chamba is best explained as the result of continuous thrusting along a major basal decollement, with a flat beneath the slowly exhuming internal compartments and a steep frontal ramp at the rapidly exhuming frontal range. The pattern in Chamba contrasts with what is observed elsewhere along the Himalaya, where exhumation is focused in a zone similar to 150 km north of the orogenic front. In the NW Himalaya, preserved High Himalayan Crystalline nappes and Lesser Himalayan windows alternate on a relatively small scale of <100 km; these alternations are closely correlated with the pattern of exhumation. Although the spatial distribution of high-exhumation zones varies considerably between individual Himalayan sectors, all of these zones are closely correlated with locally higher rock-uplift rates, sharp topographic discontinuities, and focused orographic precipitation, suggesting strong feedbacks between tectonically driven rock uplift, orographically enhanced precipitation, and erosional processes.
The Cenozoic Tian Shan is one of the preeminent examples of an intracontinental orogen. However, there remains a significant controversy over when deformation related to the India-Asia collision commenced and therefore how shortening within the mountains has been partitioned over time. One approach has been to look at the modem shortening rate as measured by geodetic studies, combined with estimates of the total shortening across the range and extrapolate backwards. This approach suggests that the onset of range construction was ca. 10 Ma [K.Y. Abdrakhmatov, S.A. Aldazhanov, B.H. Hager, M.W Hamburger, T.A. Herring, K.B. Kalabaev, K.B. Kalabayev, V.I. Makarov, P. Molnar, S.V Panasyuk, M.T. Prilepin, R.E. Reilinger, I.S. Sadybakasov, B.J. Souter, Y.A. Trapeznikov, V.Y. Tsurkov, A.V. Zubovich, Relatively recent construction of the Tien Shan inferred from GPS measurements of present-day crustal deformation rates, Nature 384 (6608) (1996) 450-453]. An alternate method is to determine the age of the onset of exhumation using thermochronology. We present 19 new apatite fission-track (AFT) results from the southwestern Chinese portion of the belt; this region represents the first area exhumed during the late Tertiary along a transect at ca. 76 degrees E. Exhumation commenced at the Oligocene-Miocene boundary (similar to 24 Ma) along the Maidan and Muziduke thrusts, which bound the southern side of the Kokshaal range. Subsequently, deformation propagated ca. 20 km south to the Kashi basin- bounding thrust (KBT), which was exhumed by no earlier than 18.9 +/- 3.3 Ma. Three detrital AFT samples from Plio- Pleistocene strata deposited ca. 20 km farther south contain fission track grain age peaks that young monotonically upwards from 20.9 + 7.0/- 5.3 Ma to 15.9 + 5.4/- 4.0 Ma with a fairly constant lag time of 16 to 18 Ma. These ages, combined with structural data, suggest that both the hanging wall and the footwall of the KBT experienced a renewed episode of exhumation during the latest Cenozoic. The discrepancy between the Late Oligocene-Miocene initiation of significant exhumation shown herein and the 10 Ma initiation estimate from geodesy suggests that the Tian Shan has undergone a complex Late Cenozoic shortening history. Assuming that the present shortening rate could account for the total amount of Cenozoic shortening in 10 Ma and realizing that shortening initiated at least 15 Myr earlier, we conclude that the shortening rate must have varied over time, possibly in pulsed-southward migrating events, and that the present rate may not reflect the average rate since initiation of range uplift. (c) 2006 Elsevier B.V. All rights reserved
The timing of the late Cenozoic collision between the Pamir salient and the Tien Shan as well as changes in the relative motion between the Pamir and Tarim are poorly constrained. The northern margin of the Pamir salient indented northward by similar to 300 km during the late Cenozoic, accommodated by south-dipping intracontinental subduction along the Main Pamir Thrust (MPT) coupled to strike-slip faults on the eastern flank of the orogen and both strike-slip and thrust faults on the western margin. The Kashgar-Yecheng transfer system (KYTS) is the main dextral slip shear zone separating Tarim from the Eastern Pamir, with an estimated cumulative offset of similar to 280 km at an average late Cenozoic dextral slip rate of 11-15 mm/a (Cowgill, 2010). In order to better constrain the slip history of the KYTS, we collected thermochronologic samples along the eastward-flowing, deeply incised, antecedent Tashkorgan-Yarkand River, which crosses the fault system on the eastern flank of the orogen. We present 29 new biotite (40)Ar/(39)Ar ages, apatite and zircon (U-Th-Sm)/He ages, and apatite fission track (AFT) analysis, combined with published muscovite and biotite (40)Ar/(39)Ar and AFT data, to create a unique thermochronologic dataset in this poorly studied and remote region. We constrain the timing of four major N-trending faults: the latter three are strands of the KYTS. The westernmost, the Kuke fault, experienced significant dip-slip, west-side-up displacement between > 12 and 6 Ma. To the east, within the KYTS, our new thermochronologic data and geomorphic observations suggest that the Kumtag and Kusilaf dextral slip faults have been inactive since at least 3-5 Ma. Long-term incision rates across the Aertashi dextral slip fault, the easternmost strand of the KYTS, are compatible with slow horizontal slip rates of 1.7-5.3 mm/a over the past 3 to 5 Ma. In summary, these data show that the slip rate of the KYTS decreased substantially during the late Miocene or Pliocene. Furthermore, Miocene-present regional kinematic reconstructions suggest that this deceleration reflects the substantial increase of northward motion of Tarim rather than a significant decrease of the northward velocity of the Pamir. (C) 2011 Elsevier B.V. All rights reserved.