Refine
Year of publication
Language
- English (34)
Is part of the Bibliography
- yes (34)
Keywords
Institute
In order to understand present day earthquake kinematics at the Indian plate boundary, we analyse seismic broadband data recorded between 2007 and 2015 by the regional network in the Garhwal-Kumaun region, northwest Himalaya. We first estimate a local 1-D velocity model for the computation of reliable Green's functions, based on 2837 P-wave and 2680 S-wave arrivals from 251 well located earthquakes. The resulting 1-D crustal structure yields a 4-layer velocity model down to the depths of 20 km. A fifth homogeneous layer extends down to 46 km, constraining the Moho using travel-time distance curve method. We then employ a multistep moment tensor (MT) inversion algorithm to infer seismic moment tensors of 11 moderate earthquakes with Mw magnitude in the range 4.0–5.0. The method provides a fast MT inversion for future monitoring of local seismicity, since Green's functions database has been prepared. To further support the moment tensor solutions, we additionally model P phase beams at seismic arrays at teleseismic distances. The MT inversion result reveals the presence of dominant thrust fault kinematics persisting along the Himalayan belt. Shallow low and high angle thrust faulting is the dominating mechanism in the Garhwal-Kumaun Himalaya. The centroid depths for these moderate earthquakes are shallow between 1 and 12 km. The beam modeling result confirm hypocentral depth estimates between 1 and 7 km. The updated seismicity, constrained source mechanism and depth results indicate typical setting of duplexes above the mid crustal ramp where slip is confirmed along out-of-sequence thrusting. The involvement of Tons thrust sheet in out-of-sequence thrusting indicate Tons thrust to be the principal active thrust at shallow depth in the Himalayan region. Our results thus support the critical taper wedge theory, where we infer the microseismicity cluster as a result of intense activity within the Lesser Himalayan Duplex (LHD) system.
As a consequence of the rapid growing worldwide seismic data set, a huge variety of automatized data-processing methods have been developed. To perform automatized waveform-based seismological studies aiming for magnitudes or source process inversion, it is crucial to identify network stations with erroneous transfer functions, gain factors, or component orientations. We developed a new tool dedicated to automated station quality control of dense seismic networks and arrays. The python-based AutoStatsQ toolbox uses the pyrocko seismic data-processing environment. The toolbox automatically downloads data and metadata for selected teleseismic events and performs different tests. As a result, relative gain factors, sensor orientation corrections, and reliable frequency bands are computed for all stations in a chosen time period. Relative gain factors are calculated for all stations and events in a time domain based on maximum P-phase amplitudes. A Rayleigh-wave polarization analysis is used to identify deviating sensor orientations. The power spectra of all stations in a given frequency range are compared with synthetic ones, accessing Global Centroid Moment Tensor (CMT) solutions. Frequency ranges of coinciding synthetic and recorded power spectral densities (PSDs) may serve as guidelines for choosing band-pass filters for moment tensor (MT) inversion and help confirm the corner frequency of the instrument. The toolbox was applied to the permanent and temporary AlpArray networks as well as to the denser SWATH-D network, a total of over 750 stations. Stations with significantly deviating gain factors were identified, as well as stations with inverse polarity and misorientations of the horizontal components. The tool can be used to quickly access network quality and to omit or correct stations before MT inversion. Electronic Supplement: List of teleseismic events and tables of median, mean, and standard deviation of relative gain factors, and figures of relative gain factors of all event-station pairs, waveform example showing inverse polarity of horizontal components on ZS.D125, histograms of median, mean, and standard deviation of the correction angles, examples of synthetic and recorded frequency spectra of ZS.D046 and NI.VINO.
Our study presents the results of a moment tensor inversion of 19 microseismic events with M-L between 2.0 and 3.4, associated with the stimulation operation of an enhanced geothermal reservoir in Basel, Switzerland, in 2006. We adopt a three-step procedure to retrieve point source solution parameters based on full waveform inversion. The inversion is performed by fitting displacement amplitude spectra and displacement seismograms in the first and second step, respectively, assuming a double couple source model and thus obtaining focal solutions for all 19 events. Our results are in agreement with focal mechanisms from a previous study, which employed P wave first-motion polarities from more than 40 stations, whereas our solutions are achieved using full waveform data recorded by less than 10 surface stations. In the last step, a full moment tensor inversion is performed. The results from the moment tensor inversion show an improvement on the waveform fitting compared to the double couple models, which is verified by an F-test. We investigate the stability of the moment tensor solutions by employing different velocity models. The isotropic components of the moment tensor solutions of some events are not negligible, suggesting source volume changes due to fluid injection. Events with significant isotropic components occurred mainly during the stimulation phase and close to the injection well. On the other hand, events that occurred in the post-stimulation phase are predominantly pure shear failure and located further away from the well bore. These spatio-temporal patterns can be explained by the influence of pore pressure variations during and after the hydraulic stimulation at the geothermal site. (C) 2014 Elsevier Ltd. All rights reserved.
Faulting processes in volcanic areas result from a complex interaction of pressurized fluid-filled cracks and conduits with the host rock and local and regional tectonic setting. Often, volcanic seismicity is difficult to decipher in terms of the physical processes involved, and there is a need for models relating the mechanics of volcanic sources to observations. Here we use focal mechanism data of the energetic swarm induced by the 2000 dike intrusion at Miyakejima (Izu Archipelago, Japan), to study the relation between the 3-D dike-induced stresses and the characteristics of the seismicity. We perform a clustering analysis on the focal mechanism (FM) solutions and relate them to the dike stress field and to the scaling relationships of the earthquakes. We find that the strike and rake angles of the FMs are strongly correlated and cluster on bands in a strike-rake plot. We suggest that this is consistent with optimally oriented faults according to the expected pattern of Coulomb stress changes. We calculate the frequency-size distribution of the clustered sets finding that focal mechanisms with a large strike-slip component are consistent with the Gutenberg-Richter relation with a b value of about 1. Conversely, events with large normal faulting components deviate from the Gutenberg-Richter distribution with a marked roll-off on its right-hand tail, suggesting a lack of large-magnitude events (M-w>5.5). This may result from the interplay of the limited thickness and lower rock strength of the layer of rock above the dike, where normal faulting is expected, and lower stress levels linked to the faulting style and low confining pressure.
On 11 May 2011, a M (w) = 5.1 earthquake shook the town of Lorca (SE Spain) causing a disproportionately large damage for its magnitude. In order to contribute to knowledge of the behavior of the active faults present in the region and define the parameters which control their motion, we made a detailed study of the rupture process of this earthquake from inversion of body waves at regional and teleseismic distances. Ground motion displacements obtained in this way are in agreement with near-field strong motion data and GPS observations recorded in Lorca. We have obtained a partly bilateral rupture propagating to WSW (238A degrees, 54A degrees, 59A degrees) with 27 cm of maximum slip and shallow focus (4 km). The fault plane orientation corresponds to that of the Cejo de los Enamorados Fault located NE of the Lorca town and parallel to the Alhama de Murcia Fault. The distribution of slip on the fault plane can explain the lack of any observed surface rupture as we found that the rupture started at 4-km depth along a plane dipping at 54A degrees, with motion propagating upward to stop at 1.5 km below the surface. The strong motion and GPS data recorded near the epicenter are in agreement with the maximum slip on the fault. Directivity effects and the extreme shallowness of the rupture could explain the considerable damage that the earthquake caused in the town of Lorca.
Preface to the special issue "Triggered and induced seismicity: probabilities and discrimination"
(2013)
We have studied the focal mechanism of an M-w 4.0 earthquake that occurred on 8 October 2011 in the southwest of El Hierro (Canary Islands), the largest shock of the swarm that preceded the submarine eruption of El Hierro 2011-2012. The joint focal mechanism solution of 34 foreshocks has also been obtained. The results for the mainshock are consistent with a pure double-couple mechanism of a strike-slip motion with a reverse component and a focal depth of 12-13 km. The stress pattern obtained from the focal mechanism indicates horizontal compression in a north-northwest-south-southeast direction, parallel to the southern ridge of the island, and a quasi-horizontal extension in an east-west direction. Similar stress pattern is derived from the joint solution of the foreshocks. The occurrence of this family of earthquakes at the moment of the maximum strain rate of the pre-eruptive swarm suggests that their rupture process is related to tectonic stress, which led to the eruption only two days later, 5 km away from the mainshock epicenter.
Aseismic transient driving the swarm-like seismic sequence in the Pollino range, Southern Italy
(2015)
Tectonic earthquake swarms challenge our understanding of earthquake processes since it is difficult to link observations to the underlying physical mechanisms and to assess the hazard they pose. Transient forcing is thought to initiate and drive the spatio-temporal release of energy during swarms. The nature of the transient forcing may vary across sequences and range from aseismic creeping or transient slip to diffusion of pore pressure pulses to fluid redistribution and migration within the seismogenic crust. Distinguishing between such forcing mechanisms may be critical to reduce epistemic uncertainties in the assessment of hazard due to seismic swarms, because it can provide information on the frequency-magnitude distribution of the earthquakes (often deviating from the assumed Gutenberg-Richter relation) and on the expected source parameters influencing the ground motion (for example the stress drop). Here we study the ongoing Pollino range (Southern Italy) seismic swarm, a long-lasting seismic sequence with more than five thousand events recorded and located since October 2010. The two largest shocks (magnitude M-w = 4.2 and M-w = 5.1) are among the largest earthquakes ever recorded in an area which represents a seismic gap in the Italian historical earthquake catalogue. We investigate the geometrical, mechanical and statistical characteristics of the largest earthquakes and of the entire swarm. We calculate the focal mechanisms of the M-l > 3 events in the sequence and the transfer of Coulomb stress on nearby known faults and analyse the statistics of the earthquake catalogue. We find that only 25 per cent of the earthquakes in the sequence can be explained as aftershocks, and the remaining 75 per cent may be attributed to a transient forcing. The b-values change in time throughout the sequence, with low b-values correlated with the period of highest rate of activity and with the occurrence of the largest shock. In the light of recent studies on the palaeoseismic and historical activity in the Pollino area, we identify two scenarios consistent with the observations and our analysis: This and past seismic swarms may have been 'passive' features, with small fault patches failing on largely locked faults, or may have been accompanied by an 'active', largely aseismic, release of a large portion of the accumulated tectonic strain. Those scenarios have very different implications for the seismic hazard of the area.
On 2012 May 20 and 29, two damaging earthquakes with magnitudes M-w 6.1 and 5.9, respectively, struck the Emilia-Romagna region in the sedimentary Po Plain, Northern Italy, causing 26 fatalities, significant damage to historical buildings and substantial impact to the economy of the region. The earthquake sequence included four more aftershocks with M-w, >= 5.0, all at shallow depths (about 7-9 km), with similar WNW-ESE striking reverse mechanism. The timeline of the sequence suggests significant static stress interaction between the largest events. We perform here a detailed source inversion, first adopting a point source approximation and considering pure double couple and full moment tensor source models. We compare different extended source inversion approaches for the two largest events, and find that the rupture occurred in both cases along a subhorizontal plane, dipping towards SSW Directivity is well detected for the May 20 main shock, indicating that the rupture propagated unilaterally towards SE. Based on the focal mechanism solution, we further estimate the co-seismic static stress change induced by the May 20 event. By using the rate-and-state model and a Poissonian earthquake occurrence, we infer that the second largest event of May 29 was induced with a probability in the range 0.2-0.4. This suggests that the segment of fault was already prone to rupture. Finally, we estimate peak ground accelerations for the two main events as occurred separately or simultaneously. For the scenario involving hypothetical rupture areas of both main events, we estimate M-w = 6.3 and an increase of ground acceleration by 50 per cent. The approach we propose may help to quantify rapidly which regions are invested by a significant increase of the hazard, bearing the potential for large aftershocks or even a second main shock.