Refine
Language
- English (12)
Is part of the Bibliography
- yes (12)
Keywords
- Pamir (2)
- Deformation (1)
- InSAR (1)
- NE Pamir (1)
- Quaternary geochronology (1)
- Quaternary terraces (1)
- Santa Cruz Island (1)
- Tarim Basin (1)
- Tectonic geomorphology (1)
- Tian Shan (1)
Institute
Lateral movements of alluvial river channels control the extent and reworking rates of alluvial fans, floodplains, deltas, and alluvial sections of bedrock rivers. These lateral movements can occur by gradual channel migration or by sudden changes in channel position (avulsions). Whereas models exist for rates of river avulsion, we lack a detailed understanding of the rates of lateral channel migration on the scale of a channel belt. In a two-step process, we develop here an expression for the lateral migration rate of braided channel systems in coarse, non-cohesive sediment. On the basis of photographic and topographic data from laboratory experiments of braided channels performed under constant external boundary conditions, we first explore the impact of autogenic variations of the channel-system geometry (i.e. channel-bank heights, water depths, channel-system width, and channel slope) on channel-migration rates. In agreement with theoretical expectations, we find that, under such constant boundary conditions, the laterally reworked volume of sediment is constant and lateral channel-migration rates scale inversely with the channel-bank height. Furthermore, when channel-bank heights are accounted for, lateral migration rates are independent of the remaining channel geometry parameters. These constraints allow us, in a second step, to derive two alternative expressions for lateral channel-migration rates under different boundary conditions using dimensional analysis. Fits of a compilation of laboratory experiments to these expressions suggest that, for a given channel bank-height, migration rates are strongly sensitive to water discharges and more weakly sensitive to sediment discharges. In addition, external perturbations, such as changes in sediment and water discharges or base level fall, can indirectly affect lateral channel-migration rates by modulating channel-bank heights.
Bedrock fracturing and rock strength are widely believed to influence landscape morphology and erosional resistance. Yet, understanding of the quantitative relationship between rock-mass strength and landscape evolution remains limited. Here we present a new application of seismic refraction surveys that uses variations in seismic velocity to interpret differences in bedrock fracture density with depth. We use a comparative study of Fiordland and the western Southern Alps of New Zealand to examine how differences in rock type and bedrock fracturing influence landscape morphology and landslide response to rock uplift. In both regions, slopes appear invariant with differential rock-uplift rates and slope distributions reveal modal hillslope angles of similar to 32 degrees. The majority of landslides initiate on slopes steeper than the modal hillslope angle, however, landslide magnitude-frequency distributions reveal order-of-magnitude differences between the regions, with Fiordland experiencing considerably smaller and less frequent landsliding events. Landslide-driven denudation rates of similar to 9 mm/yr in the western Southern Alps and between similar to 0.1 and 0.3 mm/yr in Fiordland approximate estimates of long-term rock-uplift rates for each region. The invariance of hillslope angles, near-normal slope distributions, predominance of landslide initiation on slopes steeper than modal values, and the apparent balance between rates of uplift and landslide-driven erosion suggest that hillslopes in both regions are at threshold angles. Their similar modal slopes further suggest that both ranges are characterized by equivalent rock-mass strength, despite striking differences in lithology. Additionally, our seismic analysis reveals nearly identical surface p-wave velocities. The unexpected equivalence of both modal slopes and surface velocities between these lithologically distinct ranges is attributed to contrasting degrees of surface fracturing that have differentially affected the intact rock properties, such that they now yield equivalent surface velocities and hillslope-scale strengths. Given that surface fractures help regulate threshold angles by modulating hillslope strength; we propose that shallow seismic velocities may provide a quantitative proxy for rock-mass strength. We define two contrasting fracture and landsliding environments. In Fiordland, dense geomorphic fracturing that is focused within the shallow subsurface appears to limit the depth and magnitude of most bedrock landslides. Conversely, in the western Southern Alps, tectonic forces produce pervasive fracturing with depth that results in larger, and deeper landslides. Our data suggest that bedrock fracturing at the Earth's surface modulates threshold hillslope angles, whereas the depth of bedrock fracturing influences the magnitude and frequency of landslide response to tectonic rock uplift.
The role of bedrock fractures and rock mass strength is often considered a primary influence on the efficiency of surface processes and the morphology of landscapes. Quantifying bedrock characteristics at hillslope scales, however, has proven difficult. Here, we present a new field-based method for quantifying the depth and apparent density of bedrock fractures within the shallow subsurface based on seismic refraction surveys. We examine variations in subsurface fracture patterns in both Fiordland and the Southern Alps of New Zealand to better constrain the influence of bedrock properties in governing rates and patterns of landslides, as well as the morphology of threshold landscapes. We argue that intense tectonic deformation produces uniform bedrock fracturing with depth, whereas geomorphic processes produce strong fracture gradients focused within the shallow subsurface. Additionally, we argue that hillslope strength and stability are functions of both the intact rock strength and the density of bedrock fractures, such that for a given intact rock strength, a threshold fracture-density exists that delineates between stable and unstable rock masses. In the Southern Alps, tectonic forces have pervasively fractured intrinsically weak rock to the verge of instability, such that the entire rock mass is susceptible to failure and landslides can potentially extend to great depths. Conversely, in Fiordland, tectonic fracturing of the strong intact rock has produced fracture densities less than the regional stability threshold. Therefore, bedrock failure in Fiordland generally occurs only after geomorphic fracturing has further reduced the rock mass strength. This dependence on geomorphic fracturing limits the depths of bedrock landslides to within this geomorphically weakened zone.
Along the NE Pamir margin, flights of late Quaternary fluvial terraces span actively deforming fault-related folds. We present detailed results on two terraces dated using optically stimulated luminescence (OSL) and cosmogenic radionuclide Be-10 (CRN) techniques. Quartz OSL dating of two different grain sizes (4-11 mu m and 90-180 mu m) revealed the fine-grain quartz fraction may overestimate the terrace ages by up to a factor of ten. Two-mm, small-aliquot, coarse-grain quartz OSL ages, calculated using the minimum age model, yielded stratigraphically consistent ages within error and dated times of terrace deposition to similar to 9 and similar to 16 ka. We speculate that, in this arid environment, fine-grain samples can be transported and deposited in single, turbid, and (sometimes) night-time floods that prevent thorough bleaching and, thereby, can lead to relatively large residual OSL signals. In contrast, sand in the fluvial system is likely to have a much longer residence time during transport, thereby providing greater opportunities for thorough bleaching. CRN Be-10 depth profiles date the timing of terrace abandonment to similar to 8 and similar to 14 ka: ages that generally agree with the coarse-grain quartz OSL ages. Our new terrace age of similar to 13-14 ka is broadly consistent with other terraces in the region that indicate terrace deposition and subsequent abandonment occurred primarily during glacial-interglacial transitions, thereby suggesting a climatic control on the formation of these terraces on the margins of the Tarim Basin. Furthermore, tectonic shortening rates calculated from these deformed terraces range from similar to 1.2 to similar to 4.6 mm/a and, when combined with shortening rates from other structures in the region, illuminate the late Quaternary basinward migration of deformation to faults and folds along the Pamir-Tian Shan collisional interface.
Dating growth strata and basin fill by combining Al-26/Be-10 burial dating and magnetostratigraphy
(2018)
Cosmogenic burial dating enables dating of coarse-grained, Pliocene-Pleistocene sedimentary units that are typically difficult to date with traditional methods, such as magnetostratigraphy. In the actively deforming western Tarim Basin in NW China, Pliocene-Pleistocene conglomerates were dated at eight sites, integrating Al-26/Be-10 burial dating with previously published magnetostratigraphic sections. These samples were collected from growth strata on the flanks of growing folds and from sedimentary units beneath active faults to place timing constraints on the initiation of deformation of structures within the basin and on shortening rates on active faults. These new basin-fill and growthstrata ages document the late Neogene and Quaternary growth of the Pamir and Tian Shan orogens between >5 and 1 Ma and delineate the eastward propagation of deformation at rates up to 115 km/m.y. and basinward growth of both mountain belts at rates up to 12 km/m.y.
Piggyback basins on the margins of growing orogens commonly serve as sensitive recorders of the onset of thrust deformation and changes in source areas. The Bieertuokuoyi piggyback basin, located in the hanging wall of the Pamir Frontal Thrust, provides an unambiguous record of the outward growth of the northeast Pamir margin in northwest China from the Miocene through the Quaternary. To reconstruct the deformation along the margin, we synthesized structural mapping, stratigraphy, magnetostratigraphy, and cosmogenic burial dating of basin fill and growth strata. The Bieertuokuoyi basin records the initiation of the Pamir Frontal Thrust and the Takegai Thrust similar to 5-6Ma, as well as clast provenance and paleocurrent changes resulting from the Pliocene-to-Recent uplift and exhumation of the Pamir to the south. Our results show that coeval deformation was accommodated on the major structures on the northeast Pamir margin throughout the Miocene to Recent. Furthermore, our data support a change in the regional kinematics around the Miocene-Pliocene boundary (similar to 5-6Ma). Rapid exhumation of NE Pamir extensional domes, coupled with cessation of the Kashgar-Yecheng Transfer System on the eastern margin of the Pamir, accelerated the outward propagation of the northeastern Pamir margin and the southward propagation of the Kashi-Atushi fold-and-thrust belt in the southern Tian Shan. This coeval deformation signifies the coupling of the Pamir and Tarim blocks and the transfer of shortening north to the Pamir frontal faults and across the quasi-rigid Tarim Basin to the southern Tian Shan Kashi-Atushi fold-and-thrust system.
Geodetic and seismologic studies support a tectonic model for the central Himalaya wherein similar to 2 cm/yr of Indo-Asian convergence is accommodated along the primary decollement under the range, the Main Himalayan thrust. A steeper midcrustal ramp in the Main Himalayan thrust is commonly invoked as driving rapid rock uplift along a range-parallel band in the Greater Himalaya. This tectonic model, developed primarily from studies in central Nepal, is commonly assumed to project along strike with little lateral variation in Main Himalayan thrust geometry or associated rock uplift patterns. Here, we synthesize multiple lines of evidence for a major discontinuity in the Main Himalayan thrust in western Nepal. Analysis of topography and seismicity indicates that west of similar to 82.5 degrees E, the single band of steep topography and seismicity along the Main Himalayan thrust ramp in central Nepal bifurcates around a high-elevation, low-relief landscape, resulting in a two-step topographic front along an similar to 150 km segment of the central Himalaya. Although multiple models could explain this bifurcation, the full suite of data appears to be most consistent with a northward bend to the Main Himalayan thrust ramp and activation of a young duplex horse to the south. This poorly documented segmentation of the Main Himalayan thrust has important implications for the seismogenic potential of the western Nepal seismic gap and for models of the ongoing evolution of the orogen.
Dating growth strata and basin fill by combining 26Al/10Be burial dating and magnetostratigraphy
(2018)
Cosmogenic burial dating enables dating of coarse-grained, Pliocene-Pleistocene sedimentary units that are typically difficult to date with traditional methods, such as magnetostratigraphy. In the actively deforming western Tarim Basin in NW China, Pliocene-Pleistocene conglomerates were dated at eight sites, integrating Al-26/Be-10 burial dating with previously published magnetostratigraphic sections. These samples were collected from growth strata on the flanks of growing folds and from sedimentary units beneath active faults to place timing constraints on the initiation of deformation of structures within the basin and on shortening rates on active faults. These new basin-fill and growthstrata ages document the late Neogene and Quaternary growth of the Pamir and Tian Shan orogens between >5 and 1 Ma and delineate the eastward propagation of deformation at rates up to 115 km/m.y. and basinward growth of both mountain belts at rates up to 12 km/m.y.
Streams commonly respond to base-level fall by localizing erosion within steepened, convex knickzone reaches. Localized incision causes knickzone reaches to migrate upstream. Such migrating knickzones dictate the pace of landscape response to changes in tectonics or erosional efficiency and can help quantify the timing and source of base-level fall. Identification of knickzones typically requires individual selection of steepened reaches: a process that is tedious and subjective and has no efficient means to measure knickzone size. We construct an algorithm to automate this procedure by selecting the bounds of knickzone reaches in a -space (drainage-area normalized) framework. An automated feature calibrates algorithm parameters to a subset of knickzones handpicked by the user. The algorithm uses these parameters as consistent criteria to identify knickzones objectively, and then the algorithm measures the height, length, and slope of each knickzone reach. We test the algorithm on 1, 10, and 30m resolution digital elevation models (DEMs) of six catchments (trunk-stream lengths: 2.1-5.4km) on Santa Cruz Island, southern California. On the 1m DEM, algorithm-selected knickzones confirm 93% of handpicked knickzone positions (n=178) to a spatial accuracy of 100m, 88% to an accuracy within 50m, and 46% to an accuracy within 10m. Using 10 and 30m DEMs, accuracy is similar: 88-86% to 100m and 82% to 50m (n=38 and 36, respectively). The algorithm enables efficient regional comparison of the size and location of knickzones with geologic structures, mapped landforms, and hillslope morphology, thereby facilitating approaches to characterize the dynamics of transient landscapes. Plain Language Summary The shape of rivers reflects the environments that they flow through and the environments that they link together: mountains and oceans. Anywhere along the length of a river, changes in environmental conditions are propagated upstream and downstream as the river changes its morphology to match the new environmental conditions. Commonly, rivers steepen as land uplifts faster in regions of high tectonic convergence. The steepening of river gradients is propagated upstream and can be mapped to trace zones of high tectonic activity across landscapes and estimate the source and timing of environmental change. Such insights may indicate regions where earthquakes have become more frequent in the recent past and how rivers respond to these changes. In this submission, we detail an algorithm that can use digital topographic data (similar to google earth), to automatically map and measure anomalously steep river reaches across continental scales. This technology can highlight areas that have experienced recent sustained changes in environmental conditions, evident by changes in the morphology of rivers. Such environmental conditions could be changes in tectonic uplift and earthquake activity, changes in sea level, changes in land-use, or changes in climate, all factors that can produce measurable differences in river morphology over time.
Fluvial planation surfaces, such as straths, commonly serve as recorders of climatic and tectonic changes and are formed by the lateral erosion of rivers, a process that remains poorly understood. Here we present a study of kilometer-wide, fluvially eroded, low-relief surfaces on rapidly uplifting folds in the foreland of the southwestern Tian Shan. A combination of field work, digital elevation model analysis, and dating of fluvial deposits reveals that despite an arid climate and rapid average rock-uplift rates of 1-3mm/yr, rivers cut extensive (>1-2km wide) surfaces with typical height variations of <6m over periods of >2-6kyr. The extent of this beveling varies in space and time, such that different beveling episodes affect individual structures. Between times of planation, beveled surfaces are abandoned, incised, and deformed across the folds. In a challenge to models that link strath cutting and abandonment primarily to changes in river incision rates, we demonstrate that lateral erosion rates of antecedent streams crossing the folds have to vary by more than 1 order of magnitude to explain the creation of beveled platforms in the past and their incision at the present day. These variations do not appear to covary with climate variability and might be caused by relatively small (much less than an order of magnitude) changes in sediment or water fluxes. It remains uncertain in which settings variations in lateral bedrock erosion rates predominate over changes in vertical erosion rates. Therefore, when studying fluvial planation and strath terraces, variability of both lateral and vertical erosion rates should be considered.