Refine
Year of publication
Language
- English (12)
Is part of the Bibliography
- yes (12) (remove)
Keywords
- Salt Range (2)
- exhumation (2)
- fault bend fold (2)
- ramp (2)
- 3D CAVE (1)
- Active tectonics (1)
- Altiplano (1)
- Balanced cross section (1)
- Cosmogenic nuclides (1)
- Denudation (1)
Institute
- Institut für Geowissenschaften (12) (remove)
The northeastern margin of the Tibetan Plateau is a tectonically active region consisting of a series of faults with bounded intermountain basins and is located in the transition zone between the Tibetan Plateau and the Loess Plateau. Active deformation that may affect the topography in this region can be quantified using geomorphic indices. Therefore, we applied geomorphic indices such as the hypsometric integral and the stream length gradient index to infer neo-tectonics in the northeastern margin of the Tibetan Plateau. Different time-scaled geodetic leveling data and river incision rates were also integrated into the investigation. The results show that the hypsometric integrals are not significantly affected by lithology but spatially correspond to the hanging walls of thrust faults. The hypsometric integrals are also positively correlated with the leveling data. Although the stream length gradient index is influenced by lithology, its most pronounced anomalies of the stream length gradient are associated with the thrust faults. Consequently, the uplift in the northeast margin of the Tibetan Plateau appeared to be concentrated along the hanging walls of the thrust faults.
The topographic signature of a mountain belt depends on the interplay of tectonic, climatic and erosional processes, whose relative importance changes over times, while quantifying these processes and their rates at specific times remains a challenge. The eastern Andes of central Bolivia offer a natural laboratory in which such interplay has been debated. Here, we investigate the Rio Grande catchment which crosses orthogonally the eastern Andes orogen from the Eastern Cordillera into the Subandean Zone, exhibiting a catchment relief of up to 5000 m. Despite an enhanced tectonic activity in the Subandes, local relief, mean and modal slopes and channel steepness indices are largely similar compared to the Eastern Cordillera and the intervening Interandean Zone. Nevertheless, a dataset of 57 new cosmogenic 10Be and 26AI catchment wide denudation rates from the Rio Grande catchment reveals up to one order of magnitude higher denudation rates in the Subandean Zone (mean 0.8 mm/yr) compared to the upstream physiographic regions. We infer that tectonic activity in the thrusting dominated Subandean belt causes higher denudation rates based on cumulative rock uplift investigations and due to the absence of a pronounced climate gradient. Furthermore, the lower rock strength of the Subandean sedimentary units correlates with mean slopes similar to the ones of the Eastern Cordillera and Interandean Zone, highlighting the fact, that lithology and rock strength can control high denudation rates at low slopes.
Low denudation rates measured at the outlet of the Rio Grande catchment (Abapo) are interpreted to be a result of a biased cosmogenic nuclide mixing that is dominated by headwater signals from the Eastern Cordillera and the Interandean zone and limited catchment sediment connectivity in the lower river reaches. Therefore, comparisons of short- (i.e., sediment yield) and millennial denudation rates require caution when postulating tectonic and/or climatic forcing without detailed studies. (C) 2015 The Authors. Published by Elsevier B.V.
Denudation processes and sediment transfer are investigated in a high-elevation, low-relief environment (eastern Altiplano, Bolivia) using Be-10, Al-26, and in situ C-14 analysis in fluvial sediments. Concentrations of the long-lived nuclides Be-10 and Al-26 yield consistently low catchment-wide denudation rates of similar to 3-29 mm ky(-1) (integrating over 21-194 ky), which reflect the low geomorphic gradients and the discontinuity of fluvial transport along the eastern Altiplano margin. No significant correlation is recorded between denudation rates of individual catchments and morphological basin parameters (slope, area, elevation). This is attributed to the overall little variability in morphology. The agreement between the denudation rates and published modern sediment discharge data suggests steady landscape evolution of the eastern Altiplano from the latest Pleistocene until today. While Be-10 and Al-26 provide long-term estimates on sediment production, in situ cosmogenic C-14 is used to trace short-term sediment storage. In situ C-14 concentrations are comparatively low indicating that C-14 decayed during alluvial storage over at least the past similar to 11-20 ky. We assume storage at shallow depth (2 m) and consider the influence of soil-mantled hillslopes on the in situ C-14 concentration. Our results illustrate the importance of sediment storage even over short distances and demonstrate the potential of in situ C-14 to study sediment routing and transfer times within drainage systems. However, this study also demonstrates that the long-lived Be-10 and Al-26 nuclides can provide adequate estimates on long-term denudation rates even if sediment transport is not fast but interrupted by several thousands of years of storage.
Climatic forcing on channel profiles in the eastern cordillera of the Coroico Region, Bolivia
(2011)
Orographic precipitation has a large impact on channel morphology and rock uplift via a positive feedback to erosion. We show that in the Eastern Cordillera of Bolivia, channel concavities reach their highest values where annual precipitation increases in the downstream direction, exceeding 3000 mm. The steepest channels are upstream of this zone of high concavity, where precipitation rates are <1000 mm yr(-1). Channels exhibit graded forms both upstream and downstream of this transient reach. We conclude that the prolonged effect of orographic erosion and related tectonic uplift is the preservation of channels with extreme concavities in the Eastern Cordillera.
We applied the geomorphic indices (hypsometry and stream length gradient) to evaluate the differential uplift of the central and southern Longmenshan, a mountain range characterized by rapid erosion, strong tectonic uplift, and devastating seismic hazards. The results of the geomorphic analysis indicate that the Beichuan-Yingxiu fault and the Shuangshi-Dachuan fault act as major tectonic boundaries separating areas experiencing rapid uplift from slow uplift. The results of the geomorphic analysis also suggest that the Beichuan-Yingxiu fault is the most active fault with the largest relative uplift rates compared to the rest of the faults in the Longmenshan fault system. We compared reflected relative uplift rates based on the hypsometry and stream length gradient indices with geological/geodetic absolute rates. Along-strike and across-strike variations in the hypsometry and stream length gradient correlate with the spatial patterns derived from the apatite fission track exhumation rates, the leveling-derived uplift rate, and coseismic vertical displacements during the 2008 Wenchuan earthquake. These data defined multiple fault relationships in a complex thrust zone and provided geomorphic evidence to evaluate the potential seismic hazards of the southern Longmenshan range.
In this study, we investigate how immersive 3D geovisualization can be used in higher education. Based on MacEachren and Kraak's geovisualization cube, we examine the usage of immersive 3D geovisualization and its usefulness in a research-based learning module on flood risk, called GEOSimulator. Results of a survey among participating students reveal benefits, such as better orientation in the study area, higher interactivity with the data, improved discourse among students and enhanced motivation through immersive 3D geovisualization. This suggests that immersive 3D visualization can effectively be used in higher education and that 3D CAVE settings enhance interactive learning between students.
The Kohat fold and thrust belt in Pakistan shows a significantly different structural style due to the structural evolution on the double décollement compared to the rest of the Subhimalaya. In order to better understand the spatio-temporal structural evolution of the Kohat fold and thrust belt, we combine balanced cross sections with apatite (U?Th-Sm)/He (AHe) and apatite fission track (AFT) dating. The AHe and AFT ages appear to be totally reset, allowing us to date exhumation above structural ramps. The results suggest that deformation began on the frontal Surghar thrust at-15 Ma, predating or coeval with the development of the Main Boundary thrust at-12 Ma. Deformation propagated southward from the Main Boundary thrust on double de?collements between 10 Ma and 2 Ma, resulting in a disharmonic structural style inside the Kohat fold and thrust belt. Thermal modeling of the thermochronologic data suggest that samples inside Kohat fold and thrust belt experienced cooling due to formation of the duplexes; this deformation facilitated tectonic thickening of the wedge and erosion of the Miocene to Pliocene foreland strata. The spatial distribution of AHe and AFT ages in combination with the structural forward model suggest that, in the Kohat fold and thrust belt, the wedge deformed in-sequence as a supercritical wedge (-15-12 Ma), then readjusted by out-sequence deformation (-12-0 Ma) within the Kohat fold and thrust belt into a sub-critical wedge.
Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia-Eurasia collision zone offer the unique possibility to study middle-late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long-term evolution of the Iranian Plateau, including the regional spatio-temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle-late Miocene crustal shortening and thickening processes led to the growth of a basement-cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland-basin (Great Pari Basin) to the east between 16.5 and 10.7Ma. By 10.7Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement-cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle-flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.
The Salt Range in Pakistan exposes Precambrian to Pleistocene strata outcropping along the Salt Range Thrust (SRT). To better understand the in-situ Cambrian and Pliocene tectonic evolution of the Pakistan Subhimalaya, we have conducted low-temperature thermochronological analysis using apatite (U-Th-Sm)/He and fission track dating. We combine cooling ages from different samples located along the thrust front of the SRT into a thermal model that shows two major cooling events associated with rifting and regional erosion in the Late Palaeozoic and SRT activity since the Pliocene. Our results suggest that the SRT maintained a long-term average shortening rate of similar to 5-6 mm/yr and a high exhumation rate above the SRT ramp since similar to 4 Ma.
The Salt Range in Pakistan exposes Precambrian to Pleistocene strata outcropping along the Salt Range Thrust (SRT). To better understand the in-situ Cambrian and Pliocene tectonic evolution of the Pakistan Subhimalaya, we have conducted low-temperature thermochronological analysis using apatite (U-Th-Sm)/He and fission track dating. We combine cooling ages from different samples located along the thrust front of the SRT into a thermal model that shows two major cooling events associated with rifting and regional erosion in the Late Palaeozoic and SRT activity since the Pliocene. Our results suggest that the SRT maintained a long-term average shortening rate of similar to 5-6 mm/yr and a high exhumation rate above the SRT ramp since similar to 4 Ma.
The Gofa Province and the Chew Bahir Basin of southern Ethiopia constitute tectonically active regions, where the Southern Main Ethiopian Rift converges with the Northern Kenya Rift through a wide zone of extensional deformation with several north to northeast-trending, left-stepping en-e & PRIME;chelon basins. This sector of the Southern Main Ethiopian Rift is characterized by a semi-arid climate and a largely uniform lithology, and thus provides ideal conditions for studying the different parameters that define the tectonic and geomorphic features of this complex kinematic transfer zone. In this study, the degree of tectonic activity, spatiotemporal variations in extension, and the nature of kinematic linkage between different fault systems of the transfer zone are constrained by detailed quantitative geomorphic analysis of river catchments and focused field work. We analyzed fluvial and landscape morphometric characteristics in combination with structural, seismicity, and climatic data to better evaluate the tectono-geomorphic history of this transfer zone. Our data reveal significant north-south variations in the degree of extension from the Sawula Basin in the north (mature) to the Chew Bahir Basin in the south (juvenile). First, normalized channel-steepness indices and the spatial arrangement of knickpoints in footwall-draining streams suggest a gradual, southward shift in extensional deformation and recent tectonic activity. Second, based on 1-k(m) radius local relief and mean-hillslope maximum values that are consistent with ksn anomalies, we confirm strain localization within zones of fault interaction. Third, morphometric indices such as hypsometry, basin asymmetry factor, and valley floor width to valley height ratio also indicate a north to south gradient in tectonic activity, highlighting the importance of such a wide transfer zone with diffuse extension linking different rift segments during the break-up of continental crust.
Thick sedimentary fills in intermontane valleys are common in formerly glaciated mountain ranges but difficult to quantify. Yet knowledge of the fill thickness distribution could help to estimate sediment budgets of mountain belts and to decipher the role of stored material in modulating sediment flux from the orogen to the foreland. Here we present a new approach to estimate valley fill thickness and bedrock topography based on the geometric properties of a landscape using artificial neural networks. We test the potential of this approach following a four-tiered procedure. First, experiments with synthetic, idealized landscapes show that increasing variability in surface slopes requires successively more complex network configurations. Second, in experiments with artificially filled natural landscapes, we find that fill volumes can be estimated with an error below 20%. Third, in natural examples with valley fill surfaces that have steeply inclined slopes, such as the Unteraar and the Rhone Glaciers in the Swiss Alps, for example, the average deviation of cross-sectional area between the measured and the modeled valley fill is 26% and 27%, respectively. Finally, application of the method to the Rhone Valley, an overdeepened glacial valley in the Swiss Alps, yields a total estimated sediment volume of 9711km(3) and an average deviation of cross-sectional area between measurements and model estimates of 21.5%. Our new method allows for rapid assessment of sediment volumes in intermontane valleys while eliminating most of the subjectivity that is typically inherent in other methods where bedrock reconstructions are based on digital elevation models.