Refine
Has Fulltext
- no (3)
Document Type
- Article (3)
Language
- English (3)
Is part of the Bibliography
- yes (3)
Keywords
- Palladium (2)
- Chelates (1)
- Extraction system development (1)
- Ligand design (1)
- Renewable resources (1)
- S li-gands (1)
- S ligands (1)
- Solvent extraction (1)
- Stripping (1)
- column operation mode (1)
Institute
The chelating dithioether 1,2-bis(2-methoxyethylthio)benzene. a novel solvent extractant for Pd(II), is aimed to be utilised in the selective recovery of palladium from spent automotive catalysts. For that, the extraction system has been further customised, including the choice of an appropriate diluent (1,2-dichlorobenzene) as well as an effective stripping agent (0.5 M thiourea in 0.1 M HCl), which both have been selected from a number of potential agents. It is shown in batch experiments that the selectivity for Pd(II) is maintained when the organic phase (10(-2) M 1,2-bis(2-methoxyethylthio)benzene in 1,2-dichlorobenzene) is used several times to extract an oxidising leach solution. According to the McCabe-Thiele plot two theoretical stages are needed to extract more than 98% of the Pd(II) contained in that solution. The calculation of the thermodynamic quantities Delta H degrees. Delta S degrees and Delta G degrees reveals that the reaction is entropy driven - the temperature has only a slight influence on the extraction yield. It is demonstrated that the mono-oxidised extractant has a catalytic effect on the extraction kinetics when the aqueous phase contains highly concentrated hydrochloric acid. HPLC measurements prove the presence of small quantities of 1-(2-methoxyethylsulfinyl)-2-(2-methoxyethylthio) benzene in the organic phase.
There is a demand for new and robust PdII extractants due to growing recycling rates. Chelating dithioethers are promising substances for solvent extraction as they form stable square-planar complexes with PdII. We have modified unsaturated dithioethers, which are known to coordinate PdII, and adapted them to the requirements of industrial practice. The ligands are analogues of 1,2-dithioethene with varying electron-withdrawing backbones and polar end-groups. The crystal structures of several ligands and their palladium complexes were determined as well as their electro- and photochemical properties, complex stability and behaviour in solution. Solvent extraction experiments showed the superiority of some of our ligands over conventionally used extractants in terms of their very fast reaction rates. With highly selective 1,2-bis(2-methoxyethylthio)benzene (4) it is possible to extract PdII from a highly acidic medium in the presence of other base and palladium-group metals.
A series of three dialkyl phosphate resins with a Merrifield resin support was used to extract platinum from acidic media. In column operations total capacities of 85-130 mg/g were gained. The presence of palladium and rhodium results in the order: Pt(IV) > Pd(II) >> Rh(III). From a leach liquor gained from spent automotive catalysts metals forming anionic chloro complexes are co-extracted only to a small extent. However, in order to separate and enrich platinum a selective back-extraction can be done with a sodium thiocyanate solution. A second elution step with acidic thiourea leads to a mixed solution of palladium and rhodium.