Refine
Year of publication
Language
- English (24)
Is part of the Bibliography
- yes (24)
Keywords
- Central Andes (3)
- plume (3)
- subduction zone (3)
- Dead Sea Transform (2)
- earthquake modeling (2)
- multi-slab (2)
- numerical model (2)
- singleslab (2)
- tectonophysics (2)
- Deformation (1)
Institute
Here, we study the 3-D subduction initiation process induced by the interaction between a hot thermochemical mantle plume and oceanic lithosphere using thermo-mechanical viscoplastic finite difference marker-in-cell models. Our numerical modeling results show that self-sustaining subduction is induced by plume-lithosphere interaction when the plume is sufficiently buoyant, the oceanic lithosphere is sufficiently old and the plate is weak enough to allow the buoyant plume to. pass through it. Subduction initiation occurs following penetration of the lithosphere by the hot plume and the downward displacement of broken, nearly circular segments of lithosphere (proto-slabs) as a result of partially molten plume rocks overriding the proto-slabs. Our experiments show four different deformation regimes in response to plume-lithosphere interaction: a) self-sustaining subduction initiation, in which subduction becomes self-sustaining; b) frozen subduction initiation, in which subduction stops at shallow depths; c) slab break-off, in which the subducting circular slab breaks off soon after formation; and d) plume underplating, in which the plume does not pass through the lithosphere and instead spreads beneath it (i.e., failed subduction initiation). These regimes depend on several parameters, such as the size, composition, and temperature of the plume, the brittle/plastic strength and age of the oceanic lithosphere, and the presence/absence of lithospheric heterogeneities. The results show that subduction initiates and becomes self-sustaining when the lithosphere is older than 10 Myr and the non dimensional ratio of the plume buoyancy force and lithospheric strength above the plume is higher than approximately 2. The outcomes of our numerical experiments are applicable for subduction initiation in the modern and Precambrian Earth and for the origin of plume-related corona structures on Venus. (C) 2016 Elsevier B.V. All rights reserved.
We present a new three-dimensional density model of the Central Andes characterizing the structure and composition of the lithosphere together with a geodynamic simulation subjected to continental intraplate shortening. The principal aim of this study is to assess the link between heterogeneities in the lithosphere and different deformation patterns and styles along the orogen-foreland system of the Central Andes. First, we performed a 3D integration of new geological and geophysical data with previous models through forward modelling of Bouguer anomalies. Subsequently, a geodynamic model was set-up and parametrized from the previously obtained 3D structure and composition. We do not find a unambigous correlation between the resulting density configuration and terrane boundaries proposed by other authors. Our models reproduce the observed Bouguer anomaly and deformation patterns in the foreland. We find that thin-skinned deformation in the Subandean fold-and thrust belt is controlled by a thick sedimentary layer and coeval underthrusting of thin crust of the foreland beneath the thick crust of the Andean Plateau. In the adjacent thick-skinned deformation province of the inverted Cretaceous extensional Santa Barbara System sedimentary strata are much thinner and crustal thickness transitions from greater values in the Andean to a more reduced thickness in the foreland. Our results show that deformation processes occur where the highest gradients of lithospheric strength are present between the orogen and the foreland, thus suggesting a spatial correlation between deformation and lithospheric strength.
Controls on the deformation pattern (shortening mode and tectonic style) of orogenic forelands during lithospheric shortening remain poorly understood. Here, we use high-resolution 2D thermomechanical models to demonstrate that orogenic crustal thickness and foreland lithospheric thickness significantly control the shortening mode in the foreland. Pure-shear shortening occurs when the orogenic crust is not thicker than the foreland crust or thick, but the foreland lithosphere is thin (<70-80 km, as in the Puna foreland case). Conversely, simple-shear shortening, characterized by foreland underthrusting beneath the orogen, arises when the orogenic crust is much thicker. This thickened crust results in high gravitational potential energy in the orogen, which triggers the migration of deformation to the foreland under further shortening. Our models present fully thick-skinned, fully thin-skinned, and intermediate tectonic styles in the foreland. The first tectonics forms in a pure-shear shortening mode whereas the others require a simple-shear mode and the presence of thick (>similar to 4 km) sediments that are mechanically weak (friction coefficient <similar to 0.05) or weakened rapidly during deformation. The formation of fully thin-skinned tectonics in thick and weak foreland sediments, as in the Subandean Ranges, requires the strength of the orogenic upper lithosphere to be less than one-third as strong as that of the foreland upper lithosphere. Our models successfully reproduce foreland deformation patterns in the Central and Southern Andes and the Laramide province.
Effects of upper mantle heterogeneities on the lithospheric stress field and dynamic topography
(2018)
The orientation and tectonic regime of the observed crustal/lithospheric stress field contribute to our knowledge of different deformation processes occurring within the Earth's crust and lithosphere. In this study, we analyze the influence of the thermal and density structure of the upper mantle on the lithospheric stress field and topography. We use a 3-D lithosphere–asthenosphere numerical model with power-law rheology, coupled to a spectral mantle flow code at 300 km depth. Our results are validated against the World Stress Map 2016 (WSM2016) and the observation-based residual topography. We derive the upper mantle thermal structure from either a heat flow model combined with a seafloor age model (TM1) or a global S-wave velocity model (TM2). We show that lateral density heterogeneities in the upper 300 km have a limited influence on the modeled horizontal stress field as opposed to the resulting dynamic topography that appears more sensitive to such heterogeneities. The modeled stress field directions, using only the mantle heterogeneities below 300 km, are not perturbed much when the effects of lithosphere and crust above 300 km are added. In contrast, modeled stress magnitudes and dynamic topography are to a greater extent controlled by the upper mantle density structure. After correction for the chemical depletion of continents, the TM2 model leads to a much better fit with the observed residual topography giving a good correlation of 0.51 in continents, but this correction leads to no significant improvement of the fit between the WSM2016 and the resulting lithosphere stresses. In continental regions with abundant heat flow data, TM1 results in relatively small angular misfits. For example, in western Europe the misfit between the modeled and observation-based stress is 18.3°. Our findings emphasize that the relative contributions coming from shallow and deep mantle dynamic forces are quite different for the lithospheric stress field and dynamic topography.
Lithospheric plates move over the low-viscosity asthenosphere balancing several forces, which generate plate motions. We use a global 3-D lithosphere-asthenosphere model (SLIM3D) with visco-elasto-plastic rheology coupled to a spectral model of mantle flow at 300 km depth to quantify the influence of intra-plate friction and asthenospheric viscosity on plate velocities. We account for the brittle-ductile deformation at plate boundaries (yield stress) using a plate boundary friction coefficient to predict the present-day plate motion and net rotation of the lithospheric plates. Previous modeling studies have suggested that small friction coefficients (mu < 0.1, yield stress similar to 100 MPa) can lead to plate tectonics in models of mantle convection. Here we show that in order to match the observed present-day plate motion and net rotation, the frictional parameter must be less than 0.05. We obtain a good fit with the magnitude and orientation of the observed plate velocities (NUVEL-1A) in a no-net-rotation (NNR) reference frame with mu < 0.05 and a minimum asthenosphere viscosity of similar to 5 . 10(19) Pas to 10(20) Pas. Our estimates of net rotation (NR) of the lith-osphere suggest that amplitudes similar to 0.1-0.2 (degrees/Ma), similar to most observation-based estimates, can be obtained with asthenosphere viscosity cutoff values of similar to 10(19) Pas to 5 . 10(19) Pas and friction coefficients mu < 0.05.
The formation of the Central Andes dates back to similar to 50 Ma, but its most pronounced episode, including the growth of the Altiplano-Puna Plateau and pulsatile tectonic shortening phases, occurred within the last 25 Ma.
The reason for this evolution remains unexplained. Using geodynamic numerical modeling we infer that the primary cause of the pulses of tectonic shortening and growth of the Central Andes is the changing geometry of the subducted Nazca plate, and particularly the steepening of the mid-mantle slab segment which results in a slowing down of the trench retreat and subsequent increase in shortening of the advancing South America plate.
This steepening first happens after the end of the flat slab episode at similar to 25 Ma, and later during the buckling and stagnation of the slab in the mantle transition zone. Processes that mechanically weaken the lithosphere of the South America plate, as suggested in previous studies, enhance the intensity of the shortening events.
These processes include delamination of the mantle lithosphere and weakening of foreland sediments.
Our new modeling results are consistent with the timing and amplitude of the deformation from geological data in the Central Andes at the Altiplano latitude.
Plain Language Summary
The Central Andes is a subduction-type orogeny that formed as a result of the interaction between the Nazca oceanic plate and the South American continental plate over the last 50 million years. Growth of the Andes is primarily the result of crustal shortening. Nevertheless, "geological" data compiled from previous studies have shown that phases of drastic pulsatile shortening occur at 15 and 5 Ma.
In this study, we used high-resolution 2D numerical geodynamic simulations to investigate the link between oceanic and continental plate dynamics and their interaction. We find that when the oceanic plate steepens in the mantle transition zone, the trench retreat is hindered. Coupled with the weakening of the continental plate through the slab flattening and subsequent delamination of the lithospheric mantle, this leads to pulsatile shortening phases of a magnitude equivalent to that suggested by the data.
The Earth's biggest magmatic events are believed to originate from massive melting when hot mantle plumes rising from the lowermost mantle reach the base of the lithosphere. Classical models predict large plume heads that cause kilometre-scale surface uplift, and narrow (100 km radius) plume tails that remain in the mantle after the plume head spreads below the lithosphere. However, in many cases, such uplifts and narrow plume tails are not observed. Here using numerical models, we show that the issue can be resolved if major mantle plumes contain up to 15-20% of recycled oceanic crust in a form of dense eclogite, which drastically decreases their buoyancy and makes it depth dependent. We demonstrate that, despite their low buoyancy, large enough thermochemical plumes can rise through the whole mantle causing only negligible surface uplift. Their tails are bulky (4200 km radius) and remain in the upper mantle for 100 millions of years.
Mantle Flow as a Trigger for Subduction Initiation: A Missing Element of the Wilson Cycle Concept
(2017)
The classical Wilson Cycle concept, describing repeated opening and closing of ocean basins, hypothesizes spontaneous conversion of passive continental margins into subduction zones. This process, however, is impeded by the high strength of passive margins, and it has never occurred in Cenozoic times. Here using thermomechanical models, we show that additional forcing, provided by mantle flow, which is induced by neighboring subduction zones and midmantle slab remnants, can convert a passive margin into a subduction zone. Models suggest that this is a long-term process, thus explaining the lack of Cenozoic examples. We speculate that new subduction zones may form in the next few tens of millions of years along the Argentine passive margin and the U.S. East Coast. Mantle suction force can similarly trigger subduction initiation along large oceanic fracture zones. We propose that new subduction zones will preferentially originate where subduction zones were active in the past, thus explaining the remarkable colocation of subduction zones during at least the last 400 Myr.
The magnitude of earthquakes on continental normal faults rarely exceeds 7.0 Mw. However, because of their vicinity to large population centers they can be highly destructive.
Long recurrence time, relatively small deformations, and limited observations hinder our understanding of the deformation patterns and mechanisms controlling the magnitude of events.
Here, this problem is addressed with 2D thermomechanical modeling of normal fault seismic cycles.
The 2020 Samos, Greece Mw7.0 earthquake is used as an example as it is one of the largest and most studied continental normal fault earthquakes. The modeling approach employs visco-elasto-plastic rheology, compressibility, free surface, and a rate-and-state friction law for the fault.
Modeling of the Samos earthquake suggests the pore fluid pressure ratio on the fault ranges from 0 to 0.7. The model demonstrates that most of the deformation during interseismic and coseismic periods, besides on the fault, occurs in the hanging wall and footwall below the seismogenic part of the fault. The largest vertical surface displacement during the earthquake is the subsidence of the hanging wall in the vicinity of the fault, while the uplift of the footwall and remote part of the hanging wall is significantly smaller.
Modeling of the seismic cycles on normal faults with different setups shows the dependency of the magnitude on the thermal profile and dipping angle of the fault; low heat flow and low dipping angle are favorable conditions for the largest events, while steep normal faults in the areas of high heat flow tend to have the smallest magnitudes.