Refine
Year of publication
Language
- English (18)
Is part of the Bibliography
- yes (18)
Keywords
- Northeast German Basin (4)
- seismicity (3)
- 3D thermal model (2)
- Alps (2)
- Thermal field (2)
- numerical simulations (2)
- rheology (2)
- salt structures (2)
- 3-D numerical simulations (1)
- 3D mesh generator (1)
Fluid flow in low-permeable carbonate rocks depends on the density of fractures, their interconnectivity and on the formation of fault damage zones. The present-day stress field influences the aperture hence the transmissivity of fractures whereas paleostress fields are responsible for the formation of faults and fractures. In low-permeable reservoir rocks, fault zones belong to the major targets. Before drilling, an estimate for reservoir productivity of wells drilled into the damage zone of faults is therefore required. Due to limitations in available data, a characterization of such reservoirs usually relies on the use of numerical techniques. The requirements of these mathematical models encompass a full integration of the actual fault geometry, comprising the dimension of the fault damage zone and of the fault core, and the individual population with properties of fault zones in the hanging and foot wall and the host rock. The paper presents both the technical approach to develop such a model and the property definition of heterogeneous fault zones and host rock with respect to the current stress field. The case study describes a deep geothermal reservoir in the western central Molasse Basin in southern Bavaria, Germany. Results from numerical simulations indicate that the well productivity can be enhanced along compressional fault zones if the interconnectivity of fractures is lateral caused by crossing synthetic and antithetic fractures. The model allows a deeper understanding of production tests and reservoir properties of faulted rocks.
Understanding heat transport in sedimentary basins requires an assessment of the regional 3D heat distribution and of the main physical mechanisms responsible for the transport of heat. We review results from different 3D numerical simulations of heat transport based on 3D basin models of the Central European Basin System (CEBS). Therefore we compare differently detailed 3D structural models of the area, previously published individually, to assess the influence of (1) different configurations of the deeper lithosphere, (2) the mechanism of heat transport considered and (3) large faults dissecting the sedimentary succession on the resulting thermal field and groundwater flow. Based on this comparison we propose a modelling strategy linking the regional and lithosphere-scale to the sub-basin and basin-fill scale and appropriately considering the effective heat transport processes. We find that conduction as the dominant mechanism of heat transport in sedimentary basins is controlled by the distribution of thermal conductivities, compositional and thickness variations of both the conductive and radiogenic crystalline crust as well as the insulating sediments and by variations in the depth to the thermal lithosphere-asthenosphere boundary. Variations of these factors cause thermal anomalies of specific wavelength and must be accounted for in regional thermal studies. In addition advective heat transport also exerts control on the thermal field on the regional scale. In contrast, convective heat transport and heat transport along faults is only locally important and needs to be considered for exploration on the reservoir scale. The general applicability of the proposed workflow makes it of interest for a broad range of application in geosciences including oil and gas exploration, geothermal utilization or carbon capture and sequestration issues. (C) 2014 Elsevier Ltd. All rights reserved.
The internal geological structure of the Northeast German Basin (NEGB) is affected by intense salt diapirism and by the presence of several stratified aquifer complexes of regional relevance. The shallow Quaternary to late Tertiary freshwater aquifer is separated from the underlying Mesozoic saline aquifers by an embedded Tertiary clay enriched aquitard (Rupelian Aquitard). An important feature of this aquitard is that hydraulic connections between the upper and lower aquifers do exist in areas where the Rupelian Aquitard is missing (hydrogeological windows). Three-dimensional thermohaline numerical simulations are carried out to investigate the effects of such hydrogeological windows in the Rupelian Aquitard on the resulting groundwater, temperature, and salinity distributions. Numerical results suggest that hydrogeological windows act as preferential domains of hydraulic interconnectivity between the different aquifers at depth and enable vigorous heat and mass transport which causes a mixing of warm and saline groundwater with cold and less saline groundwater within both aquifers. In areas where the Rupelian Aquitard confines the Mesozoic aquifer, dissolved solutes from major salt structures are transported laterally giving rise to plumes of variable salinity content ranging from few hundreds of meters to several tens of kilometers. Furthermore, destabilizing thermal buoyancy forces may overwhelm counteracting stabilizing salinity induced forces offside of salt domes. This may result in buoyant upward groundwater flow transporting heat and mass to shallower levels within the same Mesozoic Aquifer.
Based on newly available data of both, the structural setting and thermal properties, we compare 3D thermal models for the area of Brandenburg, located in the Northeast German Basin, to assess the sensitivity of our model results. The structural complexity of the basin fill is given by the configuration of the Zechstein salt with salt diapirs and salt pillows. This special configuration is very relevant for the thermal calculations because salt has a distinctly higher thermal conductivity than other sediments. We calculate the temperature using a FEMethod to solve the steady state heat conduction equation in 3D. Based on this approach, we evaluate the sensitivity of the steady-state conductive thermal field with respect to different lithospheric configurations and to the assigned thermal properties. We compare three different thermal models: (a) a crustal-scale model including a homogeneous crust, (b) a new lithosphere-scale model including a differentiated crust and (c) a crustal-scale model with a stepwise variation of measured thermal properties. The comparison with measured temperatures from different structural locations of the basin shows a good fit to the temperature predictions for the first two models, whereas the third model is distinctly colder. This indicates that effective thermal conductivities may be different from values determined by measurements on rock samples. The results suggest that conduction is the main heat transport mechanism in the Brandenburg area.
The 3D thermal field across the Alpine orogen and its forelands and the relation to seismicity
(2020)
Temperature exerts a first order control on rock strength, principally via thermally activated creep deformation and on the distribution at depth of the brittle-ductile transition zone. The latter can be regarded as the lower bound to the seismogenic zone, thereby controlling the spatial distribution of seismicity within a lithospheric plate. As such, models of the crustal thermal field are important to understand the localisation of seismicity. Here we relate results from 3D simulations of the steady state thermal field of the Alpine orogen and its forelands to the distribution of seismicity in this seismically active area of Central Europe. The model takes into account how the crustal heterogeneity of the region effects thermal properties and is validated with a dataset of wellbore temperatures. We find that the Adriatic crust appears more mafic, through its radiogenic heat values (1.30E-06 W/m3) and maximum temperature of seismicity (600 degrees C), than the European crust (1.3-2.6E-06 W/m3 and 450 degrees C). We also show that at depths of < 10 km the thermal field is largely controlled by sedimentary blanketing or topographic effects, whilst the deeper temperature field is primarily controlled by the LAB topology and the distribution and parameterization of radiogenic heat sources within the upper crust.
The Kenya rift revisited
(2017)
We present three-dimensional (3-D) models that describe the present-day thermal and rheological state of the lithosphere of the greater Kenya rift region aiming at a better understanding of the rift evolution, with a particular focus on plume-lithosphere interactions. The key methodology applied is the 3-D integration of diverse geological and geophysical observations using gravity modelling. Accordingly, the resulting lithospheric-scale 3-D density model is consistent with (i) reviewed descriptions of lithological variations in the sedimentary and volcanic cover, (ii) known trends in crust and mantle seismic velocities as revealed by seismic and seismological data and (iii) the observed gravity field. This data-based model is the first to image a 3-D density configuration of the crystalline crust for the entire region of Kenya and northern Tanzania. An upper and a basal crustal layer are differentiated, each composed of several domains of different average densities. We interpret these domains to trace back to the Precambrian terrane amalgamation associated with the East African Orogeny and to magmatic processes during Mesozoic and Cenozoic rifting phases. In combination with seismic velocities, the densities of these crustal domains indicate compositional differences. The derived lithological trends have been used to parameterise steady-state thermal and rheological models. These models indicate that crustal and mantle temperatures decrease from the Kenya rift in the west to eastern Kenya, while the integrated strength of the lithosphere increases. Thereby, the detailed strength configuration appears strongly controlled by the complex inherited crustal structure, which may have been decisive for the onset, localisation and propagation of rifting.
The Kenya rift revisited
(2017)
We present three-dimensional (3-D) models that describe the present-day thermal and rheological state of the lithosphere of the greater Kenya rift region aiming at a better understanding of the rift evolution, with a particular focus on plume-lithosphere interactions. The key methodology applied is the 3-D integration of diverse geological and geophysical observations using gravity modelling. Accordingly, the resulting lithospheric-scale 3-D density model is consistent with (i) reviewed descriptions of lithological variations in the sedimentary and volcanic cover, (ii) known trends in crust and mantle seismic velocities as revealed by seismic and seismological data and (iii) the observed gravity field. This data-based model is the first to image a 3-D density configuration of the crystalline crust for the entire region of Kenya and northern Tanzania. An upper and a basal crustal layer are differentiated, each composed of several domains of different average densities. We interpret these domains to trace back to the Precambrian terrane amalgamation associated with the East African Orogeny and to magmatic processes during Mesozoic and Cenozoic rifting phases. In combination with seismic velocities, the densities of these crustal domains indicate compositional differences. The derived lithological trends have been used to parameterise steady-state thermal and rheological models. These models indicate that crustal and mantle temperatures decrease from the Kenya rift in the west to eastern Kenya, while the integrated strength of the lithosphere increases. Thereby, the detailed strength configuration appears strongly controlled by the complex inherited crustal structure, which may have been decisive for the onset, localisation and propagation of rifting.
Three dimensional modelling of fractured and faulted reservoirs : framework and implementation
(2010)
Modelling of coupled physical processes in fractured and faulted media is a major challenge for the geoscience community. Due to the complexity related to the geometry of real fracture networks and fault systems, modelling studies have been mainly restricted either to two dimensional cases or to simplified orthogonal fracture systems consisting of vertical and horizontal fractures. An approach to generate three dimensional meshes for realistic fault geometries is presented. The method enables representation of faults in an arbitrary incline as two dimensional planes within a three dimensional, stratified porous matrix of a generic geometry. Based on a structural geological model, the method creates three dimensional unstructured tetrahedral meshes. These meshes can be used for finite element and finite volume numerical simulations. A simulation of a coupled fluid flow and heat transport problem for a two layered porous medium cut by two crossing faults is presented to test the reliability of the method.