Refine
Year of publication
Document Type
- Doctoral Thesis (409) (remove)
Language
- English (409) (remove)
Keywords
- Fernerkundung (14)
- Erdbeben (12)
- Klimawandel (12)
- climate change (12)
- remote sensing (12)
- Anden (11)
- Andes (11)
- Tektonik (10)
- Erosion (9)
- Geomorphologie (9)
Institute
- Institut für Geowissenschaften (409) (remove)
Arctic warming has implications for the functioning of terrestrial Arctic ecosystems, global climate and socioeconomic systems of northern communities. A research gap exists in high spatial resolution monitoring and understanding of the seasonality of permafrost degradation, spring snowmelt and vegetation phenology. This thesis explores the diversity and utility of dense TerraSAR-X (TSX) X-Band time series for monitoring ice-rich riverbank erosion, snowmelt, and phenology of Arctic vegetation at long-term study sites in the central Lena Delta, Russia and on Qikiqtaruk (Herschel Island), Canada. In the thesis the following three research questions are addressed:
• Is TSX time series capable of monitoring the dynamics of rapid permafrost degradation in ice-rich permafrost on an intra-seasonal scale and can these datasets in combination with climate data identify the climatic drivers of permafrost degradation?
• Can multi-pass and multi-polarized TSX time series adequately monitor seasonal snow cover and snowmelt in small Arctic catchments and how does it perform compared to optical satellite data and field-based measurements?
• Do TSX time series reflect the phenology of Arctic vegetation and how does the recorded signal compare to in-situ greenness data from RGB time-lapse camera data and vegetation height from field surveys?
To answer the research questions three years of TSX backscatter data from 2013 to 2015 for the Lena Delta study site and from 2015 to 2017 for the Qikiqtaruk study site were used in quantitative and qualitative analysis complimentary with optical satellite data and in-situ time-lapse imagery.
The dynamics of intra-seasonal ice-rich riverbank erosion in the central Lena Delta, Russia were quantified using TSX backscatter data at 2.4 m spatial resolution in HH polarization and validated with 0.5 m spatial resolution optical satellite data and field-based time-lapse camera data. Cliff top lines were automatically extracted from TSX intensity images using threshold-based segmentation and vectorization and combined in a geoinformation system with manually digitized cliff top lines from the optical satellite data and rates of erosion extracted from time-lapse cameras. The results suggest that the cliff top eroded at a constant rate throughout the entire erosional season. Linear mixed models confirmed that erosion was coupled with air temperature and precipitation at an annual scale, seasonal fluctuations did not influence 22-day erosion rates. The results highlight the potential of HH polarized X-Band backscatter data for high temporal resolution monitoring of rapid permafrost degradation.
The distinct signature of wet snow in backscatter intensity images of TSX data was exploited to generate wet snow cover extent (SCE) maps on Qikiqtaruk at high temporal resolution. TSX SCE showed high similarity to Landsat 8-derived SCE when using cross-polarized VH data. Fractional snow cover (FSC) time series were extracted from TSX and optical SCE and compared to FSC estimations from in-situ time-lapse imagery. The TSX products showed strong agreement with the in-situ data and significantly improved the temporal resolution compared to the Landsat 8 time series. The final combined FSC time series revealed two topography-dependent snowmelt patterns that corresponded to in-situ measurements. Additionally TSX was able to detect snow patches longer in the season than Landsat 8, underlining the advantage of TSX for detection of old snow. The TSX-derived snow information provided valuable insights into snowmelt dynamics on Qikiqtaruk previously not available.
The sensitivity of TSX to vegetation structure associated with phenological changes was explored on Qikiqtaruk. Backscatter and coherence time series were compared to greenness data extracted from in-situ digital time-lapse cameras and detailed vegetation parameters on 30 areas of interest. Supporting previous results, vegetation height corresponded to backscatter intensity in co-polarized HH/VV at an incidence angle of 31°. The dry, tall shrub dominated ecological class showed increasing backscatter with increasing greenness when using the cross polarized VH/HH channel at 32° incidence angle. This is likely driven by volume scattering of emerging and expanding leaves. Ecological classes with more prostrate vegetation and higher bare ground contributions showed decreasing backscatter trends over the growing season in the co-polarized VV/HH channels likely a result of surface drying instead of a vegetation structure signal. The results from shrub dominated areas are promising and provide a complementary data source for high temporal monitoring of vegetation phenology.
Overall this thesis demonstrates that dense time series of TSX with optical remote sensing and in-situ time-lapse data are complementary and can be used to monitor rapid and seasonal processes in Arctic landscapes at high spatial and temporal resolution.
Hyperspectral remote sensing of the spatial and temporal heterogeneity of low Arctic vegetation
(2019)
Arctic tundra ecosystems are experiencing warming twice the global average and Arctic vegetation is responding in complex and heterogeneous ways. Shifting productivity, growth, species composition, and phenology at local and regional scales have implications for ecosystem functioning as well as the global carbon and energy balance. Optical remote sensing is an effective tool for monitoring ecosystem functioning in this remote biome. However, limited field-based spectral characterization of the spatial and temporal heterogeneity limits the accuracy of quantitative optical remote sensing at landscape scales. To address this research gap and support current and future satellite missions, three central research questions were posed:
• Does canopy-level spectral variability differ between dominant low Arctic vegetation communities and does this variability change between major phenological phases?
• How does canopy-level vegetation colour images recorded with high and low spectral resolution devices relate to phenological changes in leaf-level photosynthetic pigment concentrations?
• How does spatial aggregation of high spectral resolution data from the ground to satellite scale influence low Arctic tundra vegetation signatures and thereby what is the potential of upcoming hyperspectral spaceborne systems for low Arctic vegetation characterization?
To answer these questions a unique and detailed database was assembled. Field-based canopy-level spectral reflectance measurements, nadir digital photographs, and photosynthetic pigment concentrations of dominant low Arctic vegetation communities were acquired at three major phenological phases representing early, peak and late season. Data were collected in 2015 and 2016 in the Toolik Lake Research Natural Area located in north central Alaska on the North Slope of the Brooks Range. In addition to field data an aerial AISA hyperspectral image was acquired in the late season of 2016. Simulations of broadband Sentinel-2 and hyperspectral Environmental and Mapping Analysis Program (EnMAP) satellite reflectance spectra from ground-based reflectance spectra as well as simulations of EnMAP imagery from aerial hyperspectral imagery were also obtained.
Results showed that canopy-level spectral variability within and between vegetation communities differed by phenological phase. The late season was identified as the most discriminative for identifying many dominant vegetation communities using both ground-based and simulated hyperspectral reflectance spectra. This was due to an overall reduction in spectral variability and comparable or greater differences in spectral reflectance between vegetation communities in the visible near infrared spectrum.
Red, green, and blue (RGB) indices extracted from nadir digital photographs and pigment-driven vegetation indices extracted from ground-based spectral measurements showed strong significant relationships. RGB indices also showed moderate relationships with chlorophyll and carotenoid pigment concentrations. The observed relationships with the broadband RGB channels of the digital camera indicate that vegetation colour strongly influences the response of pigment-driven spectral indices and digital cameras can track the seasonal development and degradation of photosynthetic pigments.
Spatial aggregation of hyperspectral data from the ground to airborne, to simulated satel-lite scale was influenced by non-photosynthetic components as demonstrated by the distinct shift of the red edge to shorter wavelengths. Correspondence between spectral reflectance at the three scales was highest in the red spectrum and lowest in the near infra-red. By artificially mixing litter spectra at different proportions to ground-based spectra, correspondence with aerial and satellite spectra increased. Greater proportions of litter were required to achieve correspondence at the satellite scale.
Overall this thesis found that integrating multiple temporal, spectral, and spatial data is necessary to monitor the complexity and heterogeneity of Arctic tundra ecosystems. The identification of spectrally similar vegetation communities can be optimized using non-peak season hyperspectral data leading to more detailed identification of vegetation communities. The results also highlight the power of vegetation colour to link ground-based and satellite data. Finally, a detailed characterization non-photosynthetic ecosystem components is crucial for accurate interpretation of vegetation signals at landscape scales.
Carbonate-rich silicate and carbonate melts play a crucial role in deep Earth magmatic processes and their melt structure is a key parameter, as it controls physical and chemical properties. Carbonate-rich melts can be strongly enriched in geochemically important trace elements. The structural incorporation mechanisms of these elements are difficult to study because such melts generally cannot be quenched to glasses, which are usually employed for structural investigations. This thesis investigates the influence of CO2 on the local environments of trace elements contained in silicate glasses with variable CO2 concentrations as well as in silicate and carbonate melts. The compositions studied include sodium-rich peralkaline silicate melts and glasses and carbonate melts similar to those occurring naturally at Oldoinyo Lengai volcano, Tanzania.
The local environments of the three elements yttrium (Y), lanthanum (La) and strontium (Sr) were investigated in synthesized glasses and melts using X-ray absorption fine structure (XAFS) spectroscopy. Especially extended X-ray absorption fine structure spectroscopy (EXAFS) provides element specific information on local structure, such as bond lengths, coordination numbers and the degree of disorder. To cope with the enhanced structural disorder present in glasses and melts, EXAFS analysis was based on fitting approaches using an asymmetric distribution function as well as a correlation model according to bond valence theory. Firstly, silicate glasses quenched from high pressure/temperature melts with up to 7.6 wt % CO2 were investigated. In strongly and extremely peralkaline glasses the local structure of Y is unaffected by the CO2 content (with oxygen bond lengths of ~ 2.29 Å). Contrary, the bond lengths for Sr-O and La-O increase with increasing CO2 content in the strongly peralkaline glasses from ~ 2.53 to ~ 2.57 Å and from ~ 2.52 to ~ 2.54 Å, respectively, while they remain constant in extremely peralkaline glasses (at ~ 2.55 Å and 2.54 Å, respectively). Furthermore, silicate and unquenchable carbonate melts were investigated in-situ at high pressure/temperature conditions (2.2 to 2.6 GPa, 1200 to 1500 °C) using a Paris-Edinburgh press. A novel design of the pressure medium assembly for this press was developed, which features increased mechanical stability as well as enhanced transmittance at relevant energies to allow for low content element EXAFS in transmission. Compared to glasses the bond lengths of Y-O, La-O and Sr-O are elongated by up to + 3 % in the melt and exhibit higher asymmetric pair distributions. For all investigated silicate melt compositions Y-O bond lengths were found constant at ~ 2.37 Å, while in the carbonate melt the Y-O length increases slightly to 2.41 Å. The La-O bond lengths in turn, increase systematically over the whole silicate – carbonate melt joint from 2.55 to 2.60 Å. Sr-O bond lengths in melts increase from ~ 2.60 to 2.64 Å from pure silicate to silicate-bearing carbonate composition with constant elevated bond length within the carbonate region.
For comparison and deeper insight, glass and melt structures of Y and Sr bearing sodium-rich silicate to carbonate compositions were simulated in an explorative ab initio molecular dynamics (MD) study. The simulations confirm observed patterns of CO2-dependent local changes around Y and Sr and additionally provide further insights into detailed incorporation mechanisms of the trace elements and CO2. Principle findings include that in sodium-rich silicate compositions carbon either is mainly incorporated as a free carbonate-group or shares one oxygen with a network former (Si or [4]Al) to form a non-bridging carbonate. Of minor importance are bridging carbonates between two network formers. Here, a clear preference for two [4]Al as adjacent network formers occurs, compared to what a statistical distribution would suggest. In C-bearing silicate melts minor amounts of molecular CO2 are present, which is almost totally dissolved as carbonate in the quenched glasses.
The combination of experiment and simulation provides extraordinary insights into glass and melt structures. The new data is interpreted on the basis of bond valence theory and is used to deduce potential mechanisms for structural incorporation of investigated elements, which allow for prediction on their partitioning behavior in natural melts. Furthermore, it provides unique insights into the dissolution mechanisms of CO2 in silicate melts and into the carbonate melt structure. For the latter, a structural model is suggested, which is based on planar CO3-groups linking 7- to 9-fold cation polyhedra, in accordance to structural units as found in the Na-Ca carbonate nyerereite. Ultimately, the outcome of this study contributes to rationalize the unique physical properties and geological phenomena related to carbonated silicate-carbonate melts.
The concept of hydrologic connectivity summarizes all flow processes that link separate regions of a landscape. As such, it is a central theme in the field of catchment hydrology, with influence on neighboring disciplines such as ecology and geomorphology. It is widely acknowledged to be an important key in understanding the response behavior of a catchment and has at the same time inspired research on internal processes over a broad range of scales. From this process-hydrological point of view, hydrological connectivity is the conceptual framework to link local observations across space and scales.
This is the context in which the four studies this thesis comprises of were conducted. The focus was on structures and their spatial organization as important control on preferential subsurface flow. Each experiment covered a part of the conceptualized flow path from hillslopes to the stream: soil profile, hillslope, riparian zone, and stream.
For each study site, the most characteristic structures of the investigated domain and scale, such as slope deposits and peat layers were identified based on preliminary or previous investigations or literature reviews. Additionally, further structural data was collected and topographical analyses were carried out. Flow processes were observed either based on response observations (soil moisture changes or discharge patterns) or direct measurement (advective heat transport). Based on these data, the flow-relevance of the characteristic structures was evaluated, especially with regard to hillslope to stream connectivity.
Results of the four studies revealed a clear relationship between characteristic spatial structures and the hydrological behavior of the catchment. Especially the spatial distribution of structures throughout the study domain and their interconnectedness were crucial for the establishment of preferential flow paths and their relevance for large-scale processes. Plot and hillslope-scale irrigation experiments showed that the macropores of a heterogeneous, skeletal soil enabled preferential flow paths at the scale of centimeters through the otherwise unsaturated soil. These flow paths connected throughout the soil column and across the hillslope and facilitated substantial amounts of vertical and lateral flow through periglacial slope deposits.
In the riparian zone of the same headwater catchment, the connectivity between hillslopes and stream was controlled by topography and the dualism between characteristic subsurface structures and the geomorphological heterogeneity of the stream channel. At the small scale (1 m to 10 m) highest gains always occurred at steps along the longitudinal streambed profile, which also controlled discharge patterns at the large scale (100 m) during base flow conditions (number of steps per section). During medium and high flow conditions, however, the impact of topography and parafluvial flow through riparian zone structures prevailed and dominated the large-scale response patterns.
In the streambed of a lowland river, low permeability peat layers affected the connectivity between surface water and groundwater, but also between surface water and the hyporheic zone. The crucial factor was not the permeability of the streambed itself, but rather the spatial arrangement of flow-impeding peat layers, causing increased vertical flow through narrow “windows” in contrast to predominantly lateral flow in extended areas of high hydraulic conductivity sediments.
These results show that the spatial organization of structures was an important control for hydrological processes at all scales and study areas. In a final step, the observations from different scales and catchment elements were put in relation and compared. The main focus was on the theoretical analysis of the scale hierarchies of structures and processes and the direction of causal dependencies in this context. Based on the resulting hierarchical structure, a conceptual framework was developed which is capable of representing the system’s complexity while allowing for adequate simplifications.
The resulting concept of the parabolic scale series is based on the insight that flow processes in the terrestrial part of the catchment (soil and hillslopes) converge. This means that small-scale processes assemble and form large-scale processes and responses. Processes in the riparian zone and the streambed, however, are not well represented by the idea of convergence. Here, the large-scale catchment signal arrives and is modified by structures in the riparian zone, stream morphology, and the small-scale interactions between surface water and groundwater. Flow paths diverge and processes can better be represented by proceeding from large scales to smaller ones. The catchment-scale representation of processes and structures is thus the conceptual link between terrestrial hillslope processes and processes in the riparian corridor.
The climate is a complex dynamical system involving interactions and feedbacks among different processes at multiple temporal and spatial scales. Although numerous studies have attempted to understand the climate system, nonetheless, the studies investigating the multiscale characteristics of the climate are scarce. Further, the present set of techniques are limited in their ability to unravel the multi-scale variability of the climate system. It is completely plausible that extreme events and abrupt transitions, which are of great interest to climate community, are resultant of interactions among processes operating at multi-scale. For instance, storms, weather patterns, seasonal irregularities such as El Niño, floods and droughts, and decades-long climate variations can be better understood and even predicted by quantifying their multi-scale dynamics. This makes a strong argument to unravel the interaction and patterns of climatic processes at different scales. With this background, the thesis aims at developing measures to understand and quantify multi-scale interactions within the climate system.
In the first part of the thesis, I proposed two new methods, viz, multi-scale event synchronization (MSES) and wavelet multi-scale correlation (WMC) to capture the scale-specific features present in the climatic processes. The proposed methods were tested on various synthetic and real-world time series in order to check their applicability and replicability. The results indicate that both methods (WMC and MSES) are able to capture scale-specific associations that exist between processes at different time scales in a more detailed manner as compared to the traditional single scale counterparts.
In the second part of the thesis, the proposed multi-scale similarity measures were used in constructing climate networks to investigate the evolution of spatial connections within climatic processes at multiple timescales. The proposed methods WMC and MSES, together with complex network were applied to two different datasets.
In the first application, climate networks based on WMC were constructed for the univariate global sea surface temperature (SST) data to identify and visualize the SSTs patterns that develop very similarly over time and distinguish them from those that have long-range teleconnections to other ocean regions. Further investigations of climate networks on different timescales revealed (i) various high variability and co-variability regions, and (ii) short and long-range teleconnection regions with varying spatial distance. The outcomes of the study not only re-confirmed the existing knowledge on the link between SST patterns like El Niño Southern Oscillation and the Pacific Decadal Oscillation, but also suggested new insights into the characteristics and origins of long-range teleconnections.
In the second application, I used the developed non-linear MSES similarity measure to quantify the multivariate teleconnections between extreme Indian precipitation and climatic patterns with the highest relevance for Indian sub-continent. The results confirmed significant non-linear influences that were not well captured by the traditional methods. Further, there was a substantial variation in the strength and nature of teleconnection across India, and across time scales.
Overall, the results from investigations conducted in the thesis strongly highlight the need for considering the multi-scale aspects in climatic processes, and the proposed methods provide robust framework for quantifying the multi-scale characteristics.
Partial melting is a first order process for the chemical differentiation of the crust (Vielzeuf et al., 1990). Redistribution of chemical elements during melt generation crucially influences the composition of the lower and upper crust and provides a mechanism to concentrate and transport chemical elements that may also be of economic interest. Understanding of the diverse processes and their controlling factors is therefore not only of scientific interest but also of high economic importance to cover the demand for rare metals.
The redistribution of major and trace elements during partial melting represents a central step for the understanding how granite-bound mineralization develops (Hedenquist and Lowenstern, 1994). The partial melt generation and mobilization of ore elements (e.g. Sn, W, Nb, Ta) into the melt depends on the composition of the sedimentary source and melting conditions. Distinct source rocks have different compositions reflecting their deposition and alteration histories. This specific chemical “memory” results in different mineral assemblages and melting reactions for different protolith compositions during prograde metamorphism (Brown and Fyfe, 1970; Thompson, 1982; Vielzeuf and Holloway, 1988). These factors do not only exert an important influence on the distribution of chemical elements during melt generation, they also influence the volume of melt that is produced, extraction of the melt from its source, and its ascent through the crust (Le Breton and Thompson, 1988). On a larger scale, protolith distribution and chemical alteration (weathering), prograde metamorphism with partial melting, melt extraction, and granite emplacement are ultimately depending on a (plate-)tectonic control (Romer and Kroner, 2016). Comprehension of the individual stages and their interaction is crucial in understanding how granite-related mineralization forms, thereby allowing estimation of the mineralization potential of certain areas. Partial melting also influences the isotope systematics of melt and restite. Radiogenic and stable isotopes of magmatic rocks are commonly used to trace back the source of intrusions or to quantify mixing of magmas from different sources with distinct isotopic signatures (DePaolo and Wasserburg, 1979; Lesher, 1990; Chappell, 1996). These applications are based on the fundamental requirement that the isotopic signature in the melt reflects that of the bulk source from which it is derived. Different minerals in a protolith may have isotopic compositions of radiogenic isotopes that deviate from their whole rock signature (Ayres and Harris, 1997; Knesel and Davidson, 2002). In particular, old minerals with a distinct parent-to-daughter (P/D) ratio are expected to have a specific radiogenic isotope signature. As the partial melting reaction only involves selective phases in a protolith, the isotopic signature of the melt reflects that of the minerals involved in the melting reaction and, therefore, should be different from the bulk source signature. Similar considerations hold true for stable isotopes.
In a changing world facing several direct or indirect anthropogenic challenges the freshwater resources are endangered in quantity and quality. An excessive supply of nutrients, for example, can cause disproportional phytoplankton development and oxygen deficits in large rivers, leading to failure of the aims requested by the Water Framework Directive (WFD). Such problems can be observed in many European river catchments including the Elbe basin, and effective measures for improving water quality status are highly appreciated.
In water resources management and protection, modelling tools can help to understand the dominant nutrient processes and to identify the main sources of nutrient pollution in a watershed. They can be effective instruments for impact assessments investigating the effects of changing climate or socio-economic conditions on the status of surface water bodies, and for testing the usefulness of possible protection measures. Due to the high number of interrelated processes, ecohydrological model approaches containing water quality components are more complex than the pure hydrological ones, and their setup and calibration require more efforts. Such models, including the Soil and Water Integrated Model (SWIM), still need some further development and improvement.
Therefore, this cumulative dissertation focuses on two main objectives: 1) the approach-related objectives aiming in the SWIM model improvement and further development regarding nutrient (nitrogen and phosphorus) process description, and 2) the application-related objectives in meso- to large-scale Elbe river basins to support adaptive river basin management in view of possible future changes. The dissertation is based on five scientific papers published in international journals and dealing with these research questions.
Several adaptations were implemented in the model code to improve the representation of nutrient processes including a simple wetland approach, an extended by ammonium nitrogen cycle in the soils, as well as a detailed in-stream module, simulating algal growth, nutrient transformation processes and oxygen conditions in the river reaches, mainly driven by water temperature and light. Although this new approaches created a highly complex ecohydrological model with a large number of additional calibration parameters and rising uncertainty, the calibration and validation of the SWIM model enhanced by the new approaches in selected subcatchment and the entire Elbe river basin delivered satisfactory to good model results in terms of criteria of fit. Thus, the calibrated and validated model provided a sound base for the assessment of possible future changes and impacts in climate, land use and management in the Elbe river (sub)basin(s).
The new enhanced modelling approach improved the applicability of the SWIM model for the WFD related research questions, where the ability to consider biological water quality components (such as phytoplankton) is important. It additionally enhanced its ability to simulate the behaviour of nutrients coming mainly from point sources (e.g. phosphate phosphorus). Scenario results can be used by decision makers and stakeholders to find and understand future challenges and possible adaptation measures in the Elbe river basin.
The trace gases CO2 and CH4 pertain to the most relevant greenhouse gases and are important exchange fluxes of the global carbon (C) cycle. Their atmospheric quantity increased significantly as a result of the intensification of anthropogenic activities, such as especially land-use and land-use change, since the mid of the 18th century. To mitigate global climate change and ensure food security, land-use systems need to be developed, which favor reduced trace gas emissions and a sustainable soil carbon management. This requires the accurate and precise quantification of the influence of land-use and land-use change on CO2 and CH4 emissions. A common method to determine the trace gas dynamics and C sink or source function of a particular ecosystem is the closed chamber method. This method is often used assuming that accuracy and precision are high enough to determine differences in C gas emissions for e.g., treatment comparisons or different ecosystem components.
However, the broad range of different chamber designs, related operational procedures and data-processing strategies which are described in the scientific literature contribute to the overall uncertainty of closed chamber-based emission estimates. Hence, the outcomes of meta-analyses are limited, since these methodical differences hamper the comparability between studies. Thus, a standardization of closed chamber data acquisition and processing is much-needed.
Within this thesis, a set of case studies were performed to: (I) develop standardized routines for an unbiased data acquisition and processing, with the aim of providing traceable, reproducible and comparable closed chamber based C emission estimates; (II) validate those routines by comparing C emissions derived using closed chambers with independent C emission estimates; and (III) reveal processes driving the spatio-temporal dynamics of C emissions by developing (data processing based) flux separation approaches.
The case studies showed: (I) the importance to test chamber designs under field conditions for an appropriate sealing integrity and to ensure an unbiased flux measurement. Compared to the sealing integrity, the use of a pressure vent and fan was of minor importance, affecting mainly measurement precision; (II) that the developed standardized data processing routines proved to be a powerful and flexible tool to estimate C gas emissions and that this tool can be successfully applied on a broad range of flux data sets from very different ecosystem; (III) that automatic chamber measurements display temporal dynamics of CO2 and CH4 fluxes very well and most importantly, that they accurately detect small-scale spatial differences in the development of soil C when validated against repeated soil inventories; and (IV) that a simple algorithm to separate CH4 fluxes into ebullition and diffusion improves the identification of environmental drivers, which allows for an accurate gap-filling of measured CH4 fluxes.
Overall, the proposed standardized data acquisition and processing routines strongly improved the detection accuracy and precision of source/sink patterns of gaseous C emissions. Hence, future studies, which consider the recommended improvements, will deliver valuable new data and insights to broaden our understanding of spatio-temporal C gas dynamics, their particular environmental drivers and underlying processes.
Basaltic fissure eruptions, such as on Hawai'i or on Iceland, are thought to be driven by the lateral propagation of feeder dikes and graben subsidence. Associated solid earth processes, such as deformation and structural development, are well studied by means of geophysical and geodetic technologies. The eruptions themselves, lava fountaining and venting dynamics, in turn, have been much less investigated due to hazardous access, local dimension, fast processes, and resulting poor data availability.
This thesis provides a detailed quantitative understanding of the shape and dynamics of lava fountains and the morphological changes at their respective eruption sites. For this purpose, I apply image processing techniques, including drones and fixed installed cameras, to the sequence of frames of video records from two well-known fissure eruptions in Hawai'i and Iceland. This way I extract the dimensions of multiple lava fountains, visible in all frames. By putting these results together and considering the acquisition times of the frames I quantify the variations in height, width and eruption velocity of the lava fountains. Then I analyse these time-series in both time and frequency domains and investigate the similarities and correlations between adjacent lava fountains. Following this procedure, I am able to link the dynamics of the individual lava fountains to physical parameters of the magma transport in the feeder dyke of the fountains.
The first case study in this thesis focuses on the March 2011 Pu'u'O'o eruption, Hawai'i, where a continuous pulsating behaviour at all eight lava fountains has been observed. The lava fountains, even those from different parts of the fissure that are closely connected, show a similar frequency content and eruption behaviour. The regular pattern in the heights of lava fountain suggests a controlling process within the magma feeder system like a hydraulic connection in the underlying dyke, affecting or even controlling the pulsating behaviour.
The second case study addresses the 2014-2015 Holuhraun fissure eruption, Iceland. In this case, the feeder dyke is highlighted by the surface expressions of graben-like structures and fault systems. At the eruption site, the activity decreases from a continuous line of fire of ~60 vents to a limited number of lava fountains. This can be explained by preferred upwards magma movements through vertical structures of the pre-eruptive morphology. Seismic tremors during the eruption reveal vent opening at the surface and/or pressure changes in the feeder dyke. The evolving topography of the cinder cones during the eruption interacts with the lava fountain behaviour. Local variations in the lava fountain height and width are controlled by the conduit diameter, the depth of the lava pond and the shape of the crater. Modelling of the fountain heights shows that long-term eruption behaviour is controlled mainly by pressure changes in the feeder dyke.
This research consists of six chapters with four papers, including two first author and two co-author papers. It establishes a new method to analyse lava fountain dynamics by video monitoring. The comparison with the seismicity, geomorphologic and structural expressions of fissure eruptions shows a complex relationship between focussed flow through dykes, the morphology of the cinder cones, and the lava fountain dynamics at the vents of a fissure eruption.
The Himalayan arc stretches >2500 km from east to west at the southern edge of the Tibetan Plateau, representing one of the most important Cenozoic continent-continent collisional orogens. Internal deformation processes and climatic factors, which drive weathering, denudation, and transport, influence the growth and erosion of the orogen. During glacial times wet-based glaciers sculpted the mountain range and left overdeepend and U-shaped valleys, which were backfilled during interglacial times with paraglacial sediments over several cycles. These sediments partially still remain within the valleys because of insufficient evacuation capabilities into the foreland. Climatic processes overlay long-term tectonic processes responsible for uplift and exhumation caused by convergence. Possible processes accommodating convergence within the orogenic wedge along the main Himalayan faults, which divide the range into four major lithologic units, are debated. In this context, the identification of processes shaping the Earth’s surface on short- and on long-term are crucial to understand the growth of the orogen and implications for landscape development in various sectors along the arc. This thesis focuses on both surface and tectonic processes that shape the landscape in the western Indian Himalaya since late Miocene.
In my first study, I dated well-preserved glacially polished bedrock on high-elevated ridges and valley walls in the upper of the Chandra Valley the by means of 10Be terrestrial cosmogenic radionuclides (TCN). I used these ages and mapped glacial features to reconstruct the extent and timing of Pleistocene glaciation at the southern front of the Himalaya. I was able to reconstruct an extensive valley glacier of ~200 km length and >1000 m thickness. Deglaciation of the Chandra Valley glacier started subsequently to insolation increase on the Northern Hemisphere and thus responded to temperature increase. I showed that the timing this deglaciation onset was coeval with retreat of further midlatitude glaciers on the Northern and Southern Hemispheres. These comparisons also showed that the post-LGM deglaciation very rapid, occurred within a few thousand years, and was nearly finished prior to the Bølling/Allerød interstadial.
A second study (co-authorship) investigates how glacial advances and retreats in high mountain environments impact the landscape. By 10Be TCN dating and geomorphic mapping, we obtained maximal length and height of the Siachen Glacier within the Nubra Valley. Today the Shyok and Nubra confluence is backfilled with sedimentary deposits, which are attributed to the valley blocking of the Siachen Glacier 900 m above the present day river level. A glacial dam of the Siachen Glacier blocked the Shyok River and lead to the evolution of a more than 20 km long lake. Fluvial and lacustrine deposits in the valley document alternating draining and filling cycles of the lake dammed by the Siachen Glacier. In this study, we can show that glacial incision was outpacing fluvial incision.
In the third study, which spans the million-year timescale, I focus on exhumation and erosion within the Chandra and Beas valleys. In this study the position and discussed possible reasons of rapidly exhuming rocks, several 100-km away from one of the main Himalayan faults (MFT) using Apatite Fission Track (AFT) thermochronometry. The newly gained AFT ages indicate rapid exhumation and confirm earlier studies in the Chandra Valley. I assume that the rapid exhumation is most likely related to uplift over subsurface structures. I tested this hypothesis by combining further low-temperature thermochronometers from areas east and west of my study area. By comparing two transects, each parallel to the Beas/Chandra Valley transect, I demonstrate similarities in the exhumation pattern to transects across the Sutlej region, and strong dissimilarities in the transect crossing the Dhauladar Range. I conclude that the belt of rapid exhumation terminates at the western end of the Kullu-Rampur window. Therewith, I corroborate earlier studies suggesting changes in exhumation behavior in the western Himalaya. Furthermore, I discussed several causes responsible for the pronounced change in exhumation patterns along strike: 1) the role of inherited pre-collisional features such as the Proterozoic sedimentary cover of the Indian basement, former ridges and geological structures, and 2) the variability of convergence rates along the Himalayan arc due to an increased oblique component towards the syntaxis.
The combination of field observations (geological and geomorphological mapping) and methods to constrain short- and long-term processes (10Be, AFT) help to understand the role of the individual contributors to exhumation and erosion in the western Indian Himalaya. With the results of this thesis, I emphasize the importance of glacial and tectonic processes in shaping the landscape by driving exhumation and erosion in the studied areas.
The prediction of the ground shaking that can occur at a site of interest due to an earthquake is crucial in any seismic hazard analysis. Usually, empirically derived ground-motion prediction equations (GMPEs) are employed within a logic-tree framework to account for this step. This is, however, challenging if the area under consideration has only low seismicity and lacks enough recordings to develop a region-specific GMPE. It is then usual practice to adapt GMPEs from data-rich regions (host area) to the area with insufficient ground-motion recordings (target area). Host GMPEs must be adjusted in such a way that they will capture the specific ground-motion characteristics of the target area. In order to do so, seismological parameters of the target region have to be provided as, for example, the site-specific attenuation factor kappa0. This is again an intricate task if data amount is too sparse to derive these parameters.
In this thesis, I explore methods that can facilitate the selection of non-endemic GMPEs in a logic-tree analysis or their adjustment to a data-poor region. I follow two different strategies towards this goal.
The first approach addresses the setup of a ground-motion logic tree if no indigenous GMPE is available. In particular, I propose a method to derive an optimized backbone model that captures the median ground-motion characteristics in the region of interest. This is done by aggregating several foreign GMPEs as weighted components of a mixture model in which the weights are inferred from observed data. The approach is applied to Northern Chile, a region for which no indigenous GMPE existed at the time of the study. Mixture models are derived for interface and intraslab type events using eight subduction zone GMPEs originating from different parts of the world. The derived mixtures provide satisfying results in terms of average residuals and average sample log-likelihoods. They outperform all individual non-endemic GMPEs and are comparable to a regression model that was specifically derived for that area.
The second approach is concerned with the derivation of the site-specific attenuation factor kappa0. kappa0 is one of the key parameters in host-to-target adjustments of GMPEs but is hard to derive if data amount is sparse. I explore methods to estimate kappa0 from ambient seismic noise. Seismic noise is, in contrast to earthquake recordings, continuously available. The rapidly emerging field of seismic interferometry gives the possibility to infer velocity and attenuation information from the cross-correlation or deconvolution of long noise recordings. The extraction of attenuation parameters from diffuse wavefields is, however, not straightforward especially not for frequencies above 1 Hz and at shallow depth. In this thesis, I show the results of two studies. In the first one, data of a small-scale array experiment in Greece are used to derive Love wave quality factors in
the frequency range 1-4 Hz. In a second study, frequency dependent quality factors of S-waves (5-15 Hz) are estimated by deconvolving noise recorded in a borehole and at a co-located surface station in West Bohemia/Vogtland. These two studies can be seen as preliminary steps towards the estimation of kappa0 from seismic noise.
The Central Pontides is an accretionary-type orogenic area within the Alpine-Himalayan orogenic belt characterized by pre-collisional tectonic continental growth. The region comprises Mesozoic subduction-accretionary complexes and an accreted intra-oceanic arc that are sandwiched between the Laurasian active continental margin and Gondwana-derived the Kırşehir Block. The subduction-accretion complexes mainly consist of an Albian-Turonian accretionary wedge representing the Laurasian active continental margin. To the north, the wedge consists of slate/phyllite and metasandstone intercalation with recrystallized limestone, Na-amphibole-bearing metabasite (PT= 7–12 kbar and 400 ± 70 ºC) and tectonic slices of serpentinite representing accreted distal part of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed. Raman spectra of carbonaceous material (RSCM) of the metapelitic rocks revealed that the metaflysch sequence consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 °C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. The rest are phyllites that are characterized by slightly pronounced G band with D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 °C. The phyllites are associated with a strip of incipient blueschist facies metabasites which are found as slivers within the offscraped distal turbidites. They possibly represent underplated continental metasediments together with oceanic crustal basalt along the basal décollement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge. 40Ar/39Ar phengite ages from the phyllites are ca. 100 Ma, indicating Albian subduction and regional HP metamorphism.
The accreted continental metasediments are underlain by HP/LT metamorphic rocks of oceanic origin along an extensional shear zone. The oceanic metamorphic sequence mainly comprises tectonically thickened deep-seated eclogite to blueschist facies metabasites and micaschists. In the studied area, metabasites are epidote-blueschists locally with garnet (PT= 17 ± 1 kbar and 500 ± 40 °C). Lawsonite-blueschists are exposed as blocks along the extensional shear zone (PT= 14 ± 2 kbar and 370–440 °C). They are possibly associated with low shear stress regime of the initial stage of convergence. Close to the shear zone, the footwall micaschists consist of quartz, phengite, paragonite, chlorite, rutile with syn-kinematic albite porphyroblast formed by pervasive shearing during exhumation. These types of micaschists are tourmaline-bearing and their retrograde nature suggests high-fluid flux along shear zones. Peak metamorphic mineral assemblages are partly preserved in the chloritoid-micaschist farther away from the shear zone representing the zero strain domains during exhumation. Three peak metamorphic assemblages are identified and their PT conditions are constrained by pseudosections produced by Theriak-Domino and by Raman spectra of carbonaceous material: 1) garnet-chloritoid-glaucophane with lawsonite pseudomorphs (P= 17.5 ± 1 kbar, T: 390-450 °C) 2) chloritoid with glaucophane pseudomorphs (P= 16-18 kbar, T: 475 ± 40 °C) and 3) relatively high-Mg chloritoid (17%) with jadeite pseudomorphs (P= 22-25 kbar; T: 440 ± 30 °C) in addition to phengite, paragonite, quartz, chlorite, rutile and apatite. The last mineral assemblage is interpreted as transformation of the chloritoid + glaucophane assemblage to chloritoid + jadeite paragenesis with increasing pressure. Absence of tourmaline suggests that the chloritoid-micaschist did not interact with B-rich fluids during zero strain exhumation. 40Ar/39Ar phengite age of a pervasively sheared footwall micaschist is constrained to 100.6 ± 1.3 Ma and that of a chloritoid-micaschist is constrained to 91.8 ± 1.8 Ma suggesting exhumation during on-going subduction with a southward younging of the basal accretion and the regional metamorphism. To the south, accretionary wedge consists of blueschist and greenschist facies metabasite, marble and volcanogenic metasediment intercalation. 40Ar/39Ar phengite dating reveals that this part of the wedge is of Middle Jurassic age partly overprinted during the Albian. Emplacement of the Middle Jurassic subduction-accretion complexes is possibly associated with obliquity of the Albian convergence.
Peak metamorphic assemblages and PT estimates of the deep-seated oceanic metamorphic sequence suggest tectonic stacking within wedge with different depths of burial. Coupling and exhumation of the distinct metamorphic slices are controlled by decompression of the wedge possibly along a retreating slab. Structurally, decompression of the wedge is evident by an extensional shear zone and the footwall micaschists with syn-kinematic albite porphyroblasts. Post-kinematic garnets with increasing grossular content and pseudomorphing minerals within the chloritoid-micaschists also support decompression model without an extra heating.
Thickening of subduction-accretionary complexes is attributed to i) significant amount of clastic sediment supply from the overriding continental domain and ii) deep level basal underplating by propagation of the décollement along a retreating slab. Underplating by basal décollement propagation and subsequent exhumation of the deep-seated subduction-accretion complexes are connected and controlled by slab rollback creating a necessary space for progressive basal accretion along the plate interface and extension of the wedge above for exhumation of the tectonically thickened metamorphic sequences. This might be the most common mechanism of the tectonic thickening and subsequent exhumation of deep-seated HP/LT subduction-accretion complexes.
To the south, the Albian-Turonian accretionary wedge structurally overlies a low-grade volcanic arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed north of the İzmir-Ankara-Erzincan suture (İAES), separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metavolcanic rocks are stratigraphically overlain by recrystallized micritic limestone with rare volcanogenic metaclastic rocks. Two groups can be identified based on trace and rare earth element characteristics. The first group consists of basaltic andesite/andesite (BA1) and rhyolite with abundant cognate gabbroic xenoliths. It is characterized by relative enrichment of LREE with respect to HREE. The rocks are enriched in fluid mobile LILE, and strongly depleted in Ti and P reflecting fractionation of Fe-Ti oxides and apatite, which are found in the mafic cognate xenoliths. Abundant cognate gabbroic xenoliths and identical trace and rare earth elements compositions suggest that rhyolites and basaltic andesites/andesites (BA1) are cogenetic and felsic rocks were derived from a common mafic parental magma by fractional crystallization and accumulation processes. The second group consists only of basaltic andesites (BA2) with flat REE pattern resembling island arc tholeiites. Although enriched in LILE, this group is not depleted in Ti or P.
Geochemistry of the metavolcanic rocks indicates supra-subduction volcanism evidenced by depletion of HFSE and enrichment of LILE. The arc sequence is sandwiched between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic mélange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the Kösdağ Arc was intra-oceanic. This is in accordance with basaltic andesites (BA2) with island arc tholeiite REE pattern.
Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. Low-grade regional metamorphism of the intra-oceanic arc sequence is constrained 69.9 ± 0.4 Ma by 40Ar/39Ar dating on metamorphic muscovite from a metarhyolite indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. The youngest 40Ar/39Ar phengite age from the overlying subduction-accretion complexes is 92 Ma confirming southward younging of an accretionary-type orogenic belt. Hence, the arc sequence represents an intra-oceanic paleo-arc that formed above the sinking Tethyan slab and finally accreted to Laurasian active continental margin. Abrupt non-collisional termination of arc volcanism was possibly associated with southward migration of the arc volcanism similar to the Izu-Bonin-Mariana arc system.
The intra-oceanic Kösdağ Arc is coeval with the obducted supra-subduction ophiolites in NW Turkey suggesting that it represents part of the presumed but missing incipient intra-oceanic arc associated with the generation of the regional supra-subduction ophiolites. Remnants of a Late Cretaceous intra-oceanic paleo-arc and supra-subduction ophiolites can be traced eastward within the Alp-Himalayan orogenic belt. This reveals that Late Cretaceous intra-oceanic subduction occurred as connected event above the sinking Tethyan slab. It resulted as arc accretion to Laurasian active margin and supra-subduction ophiolite obduction on Gondwana-derived terranes.
Holocene climate variability is generally characterized by low frequency changes than compared to the last glaciations including the Lateglacial. However, there is vast evidence for decadal to centennial scale oscillations and millennial scale climate trends, which are within and beyond a human lifetime perception, respectively. Within the Baltic realm, a transitional zone between oceanic and continental climate influence, the impact of Holocene and Lateglacial climate and environmental change is currently partly understood. This is mainly attributed to the scarcity of well-dated and high-resolution sediment records and to the lacking continuity of already investigated archives.
The aim of this doctoral thesis is to reconstruct Holocene and Late Glacial climate variability on local to (over)regional scales based on varved (annually laminated) sediments from Lake Czechowskie down to annual resolution. This project was carried out within the Virtual Institute for Integrated Climate and Landscape Evolution Analyses (ICLEA) and funded by the Helmholtz Association and the Helmholtz Climate Initiative REKLIM (Regional Climate Change). ICLEA intended to gain a better understanding of climate variability and landscape evolution processes in the Northern Central European lowlands since the last deglaciation. REKLIM Topic 8 “Abrupt climate change derived from proxy data” aims at identifying spatiotemporal patterns of climate variability between e.g. higher and lower latitudes. The main aim of this thesis was (i) to establish a robust chronology based on a multiple dating approach for Lake Czechowskie covering the Late Glacial and Holocene and for the Trzechowskie palaeolake for the Lateglacial, respectively, (ii) to reconstruct past climatic and environmental conditions on centennial to multi-millennial time scales and (iii) to distinguish between local to regional different sediments responses to climate change.
Addressing the first aim, the Lake Czechowskie chronology has been established by a multiple dating approach comprising information from varve counting, tephrochronology, AMS 14C dating of terrestrial plant remains, biostratigraphy and 137Cs activity concentration measurements. Those independent age constraints covering the Lateglacial and the entire Holocene and have been further implemented in a Bayesian age model by using OxCal v.4.2. Thus, even within non-varved sediment intervals, robust chronological information has been used for absolute age determination. The identification of five cryptotephras, of which three are used as unambiguous isochrones, is furthermore a significant improvement of the Czechowskie chronology and currently unique for the Holocene within Poland. The first findings of coexisting early Holocene Hässeldalen and Askja-S cryptotephras within a varved sequence even allowed differential dating between both volcanic ashes and stimulated the discussion of revising the absolute ages of the Askja-S tephra.
The Trzechowskie palaeolake chronology has been established by a multiple dating approach comprising varve counting, tephrochronology, AMS 14C dating of terrestrial plant remains and biostratigraphy, covers the Lateglacial period (Allerød and Younger Dryas) and has been implemented in OxCal v.4.2. Those age constraints allowed regional correlation to other high-resolution climate archives and identifying leads and lags of proxy responses at the onset of the Younger Dryas.
The second aim has been accomplished by detailed micro-facies and geochemical analyses of the Czechowskie sediments for the entire Holocene. Thus, especially micro-facies changes had been linked to enhanced productivity at Lake Czechowskie. Most prominent changes have been recorded at 7.3, 6.5, 4.3 and 2.8 varve kyrs BP and are linked to a stepwise increasing influence of Atlantic air masses. Especially, the mid-Holocene change, which had been widely reported from palaeohydrological records in low latitudes, has been identified and linked to large scale reorganization of atmospheric circulation patterns. Thus, especially long-term changes of climatic and environmental boundary conditions are widely recorded by the Czechowskie sediments. The pronounced response to (multi)millennial scale changes is further corroborated by the lack of clear sediment responses to early Holocene centennial scale climate oscillations (e.g. the Preboreal Oscillation).
However, decadal scale changes at Lake Czechowskie during the most recent period (last 140 years) have been investigated in a lake comparison study. To fulfill the third aim of the doctoral thesis, three lakes in close vicinity to each other have been investigated in order to better distinguish how local, site-specific parameters, may superimpose regional climate driven changes. All lakes haven been unambiguously linked by the Askja AD1875 cryptotephra and independent varve chronologies. As a result, climate warming has only been recorded by sedimentation changes at the smallest and best sheltered lake (Głęboczek), whereas the largest lake (Czechowskie) and the shallowest lake (Jelonek) showed attenuated and less clear sediment responses, respectively. The different responses have been linked to morphological lake characteristics (lake size and depth, catchment area). This study highlights the potential of high-resolution lake comparison for robust proxy based climate reconstructions.
In summary, the doctoral thesis presents a high-resolution sediment record with an underlying age model, which is prerequisite for unprecedented age control down to annual resolution. Sediment proxy based climate reconstructions demonstrate the importance of the Czechowskie sediments for better understanding climate variability in the southern Baltic realm. Case studies showed the clear response on millennial time scale, while decadal scale fluctuations are either less well expressed or superimposed by local, site-specific parameters. The identification of volcanic ash layers is not only used for unambiguous isochrones, those are key tie lines for local to supra regional archive synchronization and establish the Lake Czechowskie as a key climate archive.
Magnetotellurics (MT) is a geophysical method that is able to image the electrical conductivity structure of the subsurface by recording time series of natural electromagnetic (EM) field variations. During the data processing these time series are divided into small segments and for each segment spectral values are computed which are typically averaged in a statistical manner to obtain MT transfer functions. Unfortunately, the presence of man-made EM noise sources often deteriorates a significant amount of the recorded time series resulting in disturbed transfer functions. Many advanced processing techniques, e.g. robust statistics, pre-stack data selection or remote reference, have been developed to tackle this problem. The first two techniques reduce the amount of outliers and noise in the data whereas the latter approach removes noise by using data from another MT station. However, especially in populated regions the data processing is still quite challenging even with these approaches. In this thesis, I present two novel pre-stack data confinement and selection criteria for the detection of outliers and noise affected data based on (i) a distance measure of each data segment with regard to the entire sample distribution and (ii) the evaluation of the magnetic polarisation direction of all segments. The first criterion is able to remove data points that scatter around the desired MT distribution and furthermore it can, under some circumstances, even reject complete data cluster originating from noise sources. The second criterion eliminates data points caused by a strongly polarised magnetic signal. Both criteria have been successfully applied to many stations with different noise contaminations showing that they can significantly improve the transfer function estimation. The novel criteria were used to evaluate a MT data set from the Eastern Karoo Basin in South Africa. The corresponding field experiment is part of an extensive research programme to collect information of the current e.g. geological setting in this region prior to a potential shale gas exploitation. The aim was to investigate whether a three-dimensional (3D) inversion of the newly measured data fosters a more realistic mapping of physical properties of the target horizon. For this purpose, a comprehensive 3D model was derived by using all available data. In a second step, I analysed parameters of the target horizon, e.g. its conductivity, that are proxies for physical properties such as thermal maturity and porosity.
Fluvial terraces, floodplains, and alluvial fans are the main landforms to store sediments and to decouple hillslopes from eroding mountain rivers. Such low-relief landforms are also preferred locations for humans to settle in otherwise steep and poorly accessible terrain. Abundant water and sediment as essential sources for buildings and infrastructure make these areas amenable places to live at. Yet valley floors are also prone to rare and catastrophic sedimentation that can overload river systems by abruptly increasing the volume of sediment supply, thus causing massive floodplain aggradation, lateral channel instability, and increased flooding. Some valley-fill sediments should thus record these catastrophic sediment pulses, allowing insights into their timing, magnitude, and consequences.
This thesis pursues this theme and focuses on a prominent ~150 km2 valley fill in the Pokhara Valley just south of the Annapurna Massif in central Nepal. The Pokhara Valley is conspicuously broad and gentle compared to the surrounding dissected mountain terrain,
and is filled with locally more than 70 m of clastic debris. The area’s main river, Seti Khola, descends from the Annapurna Sabche Cirque at 3500-4500 m asl down to 900 m asl where it incises into this valley fill. Humans began to settle on this extensive
fan surface in the 1750’s when the Trans-Himalayan trade route connected the Higher Himalayas, passing Pokhara city, with the subtropical lowlands of the Terai. High and unstable river terraces and steep gorges undermined by fast flowing rivers with highly seasonal (monsoon-driven) discharge, a high earthquake risk, and a growing population make the Pokhara Valley an ideal place to study the recent geological and geomorphic history of its sediments and the implication for natural hazard appraisals.
The objective of this thesis is to quantify the timing, the sedimentologic and geomorphic processes as well as the fluvial response to a series of strong sediment pulses. I report
diagnostic sedimentary archives, lithofacies of the fan terraces, their geochemical provenance, radiocarbon-age dating and the stratigraphic relationship between them. All these various and independent lines of evidence show consistently that multiple sediment pulses filled the Pokhara Valley in medieval times, most likely in connection with, if not triggered by, strong seismic ground shaking. The geomorphic and sedimentary evidence is
consistent with catastrophic fluvial aggradation tied to the timing of three medieval Himalayan earthquakes in ~1100, 1255, and 1344 AD. Sediment provenance and calibrated radiocarbon-age data are the key to distinguish three individual sediment pulses, as these are not evident from their sedimentology alone. I explore various measures of adjustment and fluvial response of the river system following these massive aggradation pulses. By using proxies such as net volumetric erosion, incision and erosion rates, clast provenance on active river banks, geomorphic markers such as re-exhumed tree trunks in growth position, and knickpoint locations in tributary valleys, I estimate the response of the river network in the Pokhara Valley to earthquake disturbance over several centuries. Estimates of the removed volumes since catastrophic valley filling began, require average net sediment
yields of up to 4200 t km−2 yr−1 since, rates that are consistent with those reported for Himalayan rivers. The lithological composition of active channel-bed load differs from that of local bedrock material, confirming that rivers have adjusted 30-50% depending on data of different tributary catchments, locally incising with rates of 160-220 mm yr−1. In many tributaries to the Seti Khola, most of the contemporary river loads come from a Higher Himalayan source, thus excluding local hillslopes as sources. This imbalance in sediment provenance emphasizes how the medieval sediment pulses must have rapidly traversed up to 70 km downstream to invade the downstream reaches of the tributaries
up to 8 km upstream, thereby blocking the local drainage and thus reinforcing, or locally creating new, floodplain lakes still visible in the landscape today.
Understanding the formation, origin, mechanism and geomorphic processes of this valley fill is crucial to understand the landscape evolution and response to catastrophic sediment pulses. Several earthquake-triggered long-runout rock-ice avalanches or catastrophic dam burst in the Higher Himalayas are the only plausible mechanisms to explain both the geomorphic and sedimentary legacy that I document here. In any case, the Pokhara Valley was most likely hit by a cascade of extremely rare processes over some two centuries starting in the early 11th century. Nowhere in the Himalayas do we find valley fills of
comparable size and equally well documented depositional history, making the Pokhara Valley one of the most extensively dated valley fill in the Himalayas to date. Judging from the growing record of historic Himalayan earthquakes in Nepal that were traced and
dated in fault trenches, this thesis shows that sedimentary archives can be used to directly aid reconstructions and predictions of both earthquake triggers and impacts from a sedimentary-response perspective. The knowledge about the timing, evolution, and response of the Pokhara Valley and its river system to earthquake triggered sediment pulses is important to address the seismic and geomorphic risk for the city of Pokhara. This
thesis demonstrates how geomorphic evidence on catastrophic valley infill can help to independently verify paleoseismological fault-trench records and may initiate re-thinking on post-seismic hazard assessments in active mountain regions.
Trends in precipitation over Germany and the Rhine basin related to changes in weather patterns
(2017)
Precipitation as the central meteorological feature for agriculture, water security, and human well-being amongst others, has gained special attention ever since. Lack of precipitation may have devastating effects such as crop failure and water scarcity. Abundance of precipitation, on the other hand, may as well result in hazardous events such as flooding and again crop failure. Thus, great effort has been spent on tracking changes in precipitation and relating them to underlying processes. Particularly in the face of global warming and given the link between temperature and atmospheric water holding capacity, research is needed to understand the effect of climate change on precipitation.
The present work aims at understanding past changes in precipitation and other meteorological variables. Trends were detected for various time periods and related to associated changes in large-scale atmospheric circulation. The results derived in this thesis may be used as the foundation for attributing changes in floods to climate change. Assumptions needed for the downscaling of large-scale circulation model output to local climate stations are tested and verified here.
In a first step, changes in precipitation over Germany were detected, focussing not only on precipitation totals, but also on properties of the statistical distribution, transition probabilities as a measure for wet/dry spells, and extreme precipitation events.
Shifting the spatial focus to the Rhine catchment as one of the major water lifelines of Europe and the largest river basin in Germany, detected trends in precipitation and other meteorological variables were analysed in relation to states of an ``optimal'' weather pattern classification. The weather pattern classification was developed seeking the best skill in explaining the variance of local climate variables.
The last question addressed whether observed changes in local climate variables are attributable to changes in the frequency of weather patterns or rather to changes within the patterns itself. A common assumption for a downscaling approach using weather patterns and a stochastic weather generator is that climate change is expressed only as a changed occurrence of patterns with the pattern properties remaining constant. This assumption was validated and the ability of the latest generation of general circulation models to reproduce the weather patterns was evaluated.
% Paper 1
Precipitation changes in Germany in the period 1951-2006 can be summarised briefly as negative in summer and positive in all other seasons. Different precipitation characteristics confirm the trends in total precipitation: while winter mean and extreme precipitation have increased, wet spells tend to be longer as well (expressed as increased probability for a wet day followed by another wet day). For summer the opposite was observed: reduced total precipitation, supported by decreasing mean and extreme precipitation and reflected in an increasing length of dry spells.
Apart from this general summary for the whole of Germany, the spatial distribution within the country is much more differentiated. Increases in winter precipitation are most pronounced in the north-west and south-east of Germany, while precipitation increases are highest in the west for spring and in the south for autumn. Decreasing summer precipitation was observed in most regions of Germany, with particular focus on the south and west.
The seasonal picture, however, was again differently represented in the contributing months, e.g.\ increasing autumn precipitation in the south of Germany is formed by strong trends in the south-west in October and in the south-east in November. These results emphasise the high spatial and temporal organisation of precipitation changes.
% Paper 2
The next step towards attributing precipitation trends to changes in large-scale atmospheric patterns was the derivation of a weather pattern classification that sufficiently stratifies the local climate variables under investigation. Focussing on temperature, radiation, and humidity in addition to precipitation, a classification based on mean sea level pressure, near-surface temperature, and specific humidity was found to have the best skill in explaining the variance of the local variables. A rather high number of 40 patterns was selected, allowing typical pressure patterns being assigned to specific seasons by the associated temperature patterns. While the skill in explaining precipitation variance is rather low, better skill was achieved for radiation and, of course, temperature.
Most of the recent GCMs from the CMIP5 ensemble were found to reproduce these weather patterns sufficiently well in terms of frequency, seasonality, and persistence.
% Paper 3
Finally, the weather patterns were analysed for trends in pattern frequency, seasonality, persistence, and trends in pattern-specific precipitation and temperature. To overcome uncertainties in trend detection resulting from the selected time period, all possible periods in 1901-2010 with a minimum length of 31 years were considered. Thus, the assumption of a constant link between patterns and local weather was tested rigorously. This assumption was found to hold true only partly. While changes in temperature are mainly attributable to changes in pattern frequency, for precipitation a substantial amount of change was detected within individual patterns.
Magnitude and even sign of trends depend highly on the selected time period. The frequency of certain patterns is related to the long-term variability of large-scale circulation modes.
Changes in precipitation were found to be heterogeneous not only in space, but also in time - statements on trends are only valid for the specific time period under investigation. While some part of the trends can be attributed to changes in the large-scale circulation, distinct changes were found within single weather patterns as well.
The results emphasise the need to analyse multiple periods for thorough trend detection wherever possible and add some note of caution to the application of downscaling approaches based on weather patterns, as they might misinterpret the effect of climate change due to neglecting within-type trends.
Steep mountain channels are an important component of the fluvial system. On geological timescales, they shape mountain belts and counteract tectonic uplift by erosion. Their channels are strongly coupled to hillslopes and they are often the main source of sediment transported downstream to low-gradient rivers and to alluvial fans, where commonly settlements in mountainous areas are located. Hence, mountain streams are the cause for one of the main natural hazards in these regions. Due to climate change and a pronounced populating of mountainous regions the attention given to this threat is even growing. Although quantitative studies on sediment transport have significantly advanced our knowledge on measuring and calibration techniques we still lack studies of the processes within mountain catchments. Studies examining the mechanisms of energy and mass exchange on small temporal and spatial scales in steep streams remain sparse in comparison to low-gradient alluvial channels.
In the beginning of this doctoral project, a vast amount of experience and knowledge of a steep stream in the Swiss Prealps had to be consolidated in order to shape the principal aim of this research effort. It became obvious, that observations from within the catchment are underrepresented in comparison to experiments performed at the catchment’s outlet measuring fluxes and the effects of the transported material. To counteract this imbalance, an examination of mass fluxes within the catchment on the process scale was intended. Hence, this thesis is heavily based on direct field observations, which are generally rare in these environments in quantity and quality. The first objective was to investigate the coupling of the channel with surrounding hillslopes, the major sources of sediment. This research, which involved the monitoring of the channel and adjacent hillslopes, revealed that alluvial channel steps play a key role in coupling of channel and hillslopes. The observations showed that hillslope stability is strongly associated with the step presence and an understanding of step morphology and stability is therefore crucial in understanding sediment mobilization. This finding refined the way we think about the sediment dynamics in steep channels and motivated continued research of the step dynamics. However, soon it became obvious that the technological basis for developing field tests and analyzing the high resolution geometry measured in the field was not available. Moreover, for many geometrical quantities in mountain channels definitions and a clear scientific standard was not available. For example, these streams are characterized by a high spatial variability of the channel banks, preventing straightforward calculations of the channel width without a defined reference. Thus, the second and inevitable part of this thesis became the development and evaluation of scientific tools in order to investigate the geometrical content of the study reach thoroughly. The developed framework allowed the derivation of various metrics of step and channel geometry which facilitated research on the a large data set of observations of channel steps. In the third part, innovative, physically-based metrics have been developed and compared to current knowledge on step formation, suggested in the literature. With this analyses it could be demonstrated that the formation of channel steps follow a wide range of hydraulic controls. Due to the wide range of tested parameters channel steps observed in a natural stream were attributed to different mechanisms of step formation, including those based on jamming and those based on key-stones. This study extended our knowledge on step formation in a steep stream and harmonized different, often time seen as competing, processes of step formation. This study was based on observations collected at one point in time. In the fourth part of this project, the findings of the snap-shot observations were extended in the temporal dimension and the derived concepts have been utilized to investigate reach-scale step patterns in response to large, exceptional flood events. The preliminary results of this work based on the long-term analyses of 7 years of long profile surveys showed that the previously observed channel-hillslope mechanism is the responsible for the short-term response of step formation.
The findings of the long-term analyses of step patterns drew a bow to the initial observations of a channel-hillslope system which allowed to join the dots in the dynamics of steep stream. Thus, in this thesis a broad approach has been chosen to gain insights into the complex system of steep mountain rivers. The effort includes in situ field observations (article I), the development of quantitative scientific tools (article II), the reach-scale analyses of step-pool morphology (article III) and its temporal evolution (article IV). With this work our view on the processes within the catchment has been advanced towards a better mechanistic understanding of these fluvial system relevant to improve applied scientific work.
Anthropogenically amplified erosion leads to increased fine-grained sediment input into the fluvial system in the 15.000 km2 Kharaa River catchment in northern Mongolia and constitutes a major stressing factor for the aquatic ecosystem. This study uniquely combines the application of intensive monitoring, source fingerprinting and catchment modelling techniques to allow for the comparison of the credibility and accuracy of each single method. High-resolution discharge data were used in combination with daily suspended solid measurements to calculate the suspended sediment budget and compare it with estimations of the sediment budget model SedNet. The comparison of both techniques showed that the development of an overall sediment budget with SedNet was possible, yielding results in the same order of magnitude (20.3 kt a- 1 and 16.2 kt a- 1).
Radionuclide sediment tracing, using Be-7, Cs-137 and Pb-210 was applied to differentiate sediment sources for particles < 10μm from hillslope and riverbank erosion and showed that riverbank erosion generates 74.5% of the suspended sediment load, whereas surface erosion contributes 21.7% and gully erosion only 3.8%. The contribution of the single subcatchments of the Kharaa to the suspended sediment load was assessed based on their variation in geochemical composition (e.g. in Ti, Sn, Mo, Mn, As, Sr, B, U, Ca and Sb). These variations were used for sediment source discrimination with geochemical composite fingerprints based on Genetic Algorithm driven Discriminant Function Analysis, the Kruskal–Wallis H-test and Principal Component Analysis. The contributions of the individual sub-catchment varied from 6.4% to 36.2%, generally showing higher contributions from the sub-catchments in the middle, rather than the upstream portions of the study area.
The results indicate that river bank erosion generated by existing grazing practices of livestock is the main cause for elevated fine sediment input. Actions towards the protection of the headwaters and the stabilization of the river banks within the middle reaches were identified as the highest priority. Deforestation and by lodging and forest fires should be prevented to avoid increased hillslope erosion in the mountainous areas. Mining activities are of minor importance for the overall catchment sediment load but can constitute locally important point sources for particular heavy metals in the fluvial system.
Ecosystem services (ESs) are defined as the contributions that ecosystems make to human wellbeing and are increasingly being used as an approach to explore the importance of ecosystems for humans through their valuation. Although value plurality has been recognised long before the mainstreaming of ESs research, socio-cultural valuation is still underrepresented in ESs assessments. It is the central goal of this PhD dissertation to explore the ability of socio-cultural valuation methods for the operationalisation of ESs research in land management. To address this, I formulated three research objectives that are briefly outlined below and relate to the three studies conducted during this dissertation.
The first objective relates to the assessment of the current role of socio-cultural valuation in ESs research. Human values are central to ESs research yet non-monetary socio-cultural valuation methods have been found underrepresented in the field of ESs science. In regard to the unbalanced consideration of value domains and conceptual uncertainties, I perform a systematic literature review aiming to answer the research question: To what extent have socio-cultural values been addressed in ESs assessments.
The second objective aims to test socio-cultural valuation methods of ESs and their relevance for land use preferences by exploring their methodological opportunities and limitations. Socio-cultural valuation methods have only recently become a focus in ESs research and therefore bear various uncertainties in regard to their methodological implications. To overcome these uncertainties, I analysed responses to a visitor survey. The research questions related to the second objective were: What are the implications of different valuation methods for ESs values? To what extent are land use preferences explained by socio-cultural values of ESs?
The third objective addressed in this dissertation is the implementation of ESs research into land management through socio-cultural valuation. Though it is emphasised that the ESs approach can assist decision making, there is little empirical evidence of the effect of ESs knowledge on land management. I proposed a way to implement transdisciplinary, spatially explicit research on ESs by answering the following research questions: Which landscape features underpinning ESs supply are considered in land management? How can participatory approaches accounting for ESs be operationalised in land management?
The empirical research resulted in five main findings that provide answers to the research questions. First, this dissertation provides evidence that socio-cultural values are an integral part of ESs research. I found that they can be assessed for provisioning, regulating, and cultural services though they are linked to cultural services to a greater degree. Socio-cultural values have been assessed by monetary and non-monetary methods and their assessment is effectively facilitated by stakeholder participation. Second, I found that different methods of socio-cultural valuation revealed different information. Whereas rating revealed a general value of ESs, weighting was found more suitable to identify priorities across ESs. Value intentions likewise differed in the distribution of values, generally implying a higher value for others than for respondents themselves. Third, I showed that ESs values were distributed similarly across groups with differing land use preferences. Thus, I provided empirical evidence that ESs values and landscape values should not be used interchangeably. Fourth, I showed which landscape features important for ESs supply in a Scottish regional park are not sufficiently accounted for in the current management strategy. This knowledge is useful for the identification of priority sites for land management. Finally, I provide an approach to explore how ESs knowledge elicited by participatory mapping can be operationalised in land management. I demonstrate how stakeholder knowledge and values can be used for the identification of ESs hotspots and how these hotspots can be compared to current management priorities.
This dissertation helps to bridge current gaps of ESs science by advancing the understanding of the current role of socio-cultural values in ESs research, testing different methods and their relevance for land use preferences, and implementing ESs knowledge into land management. If and to what extent ESs and their values are implemented into ecosystem management is mainly the choice of the management. An advanced understanding of socio-cultural valuation methods contributes to the normative basis of this management, while the proposal for the implementation of ESs in land management presents a practical approach of how to transfer this type of knowledge into practice. The proposed methods for socio-cultural valuation can support guiding land management towards a balanced consideration of ESs and conservation goals.
According to the classical plume hypothesis, mantle plumes are localized upwellings of hot, buoyant material in the Earth’s mantle. They have a typical mushroom shape, consisting of a large plume head, which is associated with the formation of voluminous flood basalts (a Large
Igneous Province) and a narrow plume tail, which generates a linear, age-progressive chain of volcanic edifices (a hotspot track) as the tectonic plate migrates over the relatively stationary plume. Both plume heads and tails reshape large areas of the Earth’s surface over many tens of millions of years.
However, not every plume has left an exemplary record that supports the classical hypothesis. The main objective of this thesis is therefore to study how specific hotspots have created the crustal thickness pattern attributed to their volcanic activities. Using regional geodynamic
models, the main chapters of this thesis address the challenge of deciphering the three individual (and increasingly complex) Réunion, Iceland, and Kerguelen hotspot histories, especially focussing on the interactions between the respective plume and nearby spreading ridges.
For this purpose, the mantle convection code ASPECT is used to set up three-dimensional numerical models, which consider the specific local surroundings of each plume by prescribing time-dependent boundary conditions for temperature and mantle flow. Combining reconstructed plate boundaries and plate motions, large-scale global flow velocities and an inhomogeneous lithosphere thickness distribution together with a dehydration rheology represents a novel setup for regional convection models.
The model results show the crustal thickness pattern produced by the plume, which is compared to present-day topographic structures, crustal thickness estimates and age determinations of volcanic provinces associated with hotspot activity. Altogether, the model results agree well
with surface observations. Moreover, the dynamic development of the plumes in the models provide explanations for the generation of smaller, yet characteristic volcanic features that were previously unexplained. Considering the present-day state of a model as a prediction for the
current temperature distribution in the mantle, it cannot only be compared to observations on the surface, but also to structures in the Earth’s interior as imaged by seismic tomography.
More precisely, in the case of the Réunion hotspot, the model demonstrates how the distinctive gap between the Maldives and Chagos is generated due to the combination of the ridge geometry and plume-ridge interaction. Further, the Rodrigues Ridge is formed as the surface expression
of a long-distance sublithospheric flow channel between the upwelling plume and the closest ridge segment, confirming the long-standing hypothesis of Morgan (1978) for the first time in a dynamic context. The Réunion plume has been studied in connection with the seismological
RHUM-RUM project, which has recently provided new seismic tomography images that yield an excellent match with the geodynamic model.
Regarding the Iceland plume, the numerical model shows how plume material may have accumulated in an east-west trending corridor of thin lithosphere across Greenland and resulted in simultaneous melt generation west and east of Greenland. This provides an explanation for the
extremely widespread volcanic material attributed to magma production of the Iceland hotspot and demonstrates that the model setup is also able to explain more complicated hotspot histories. The Iceland model results also agree well with newly derived seismic tomographic images.
The Kerguelen hotspot has an extremely complex history and previous studies concluded that the plume might be dismembered or influenced by solitary waves in its conduit to produce the reconstructed variable melt production rate. The geodynamic model, however, shows that a constant plume influx can result in a variable magma production rate if the plume interacts with nearby mid-ocean ridges. Moreover, the Ninetyeast Ridge in the model is created by on-ridge activities, while the Kerguelen plume was located beneath the Australian plate. This is also a contrast to earlier studies, which described the Ninetyeast Ridge as the result of the Indian plate passing over the plume. Furthermore, the Amsterdam-Saint Paul Plateau in the model is the result of plume material flowing from the upwelling toward the Southeast Indian Ridge, whereas previous geochemical studies attributed that volcanic province to a separate deep plume.
In summary, the three case studies presented in this thesis consistently highlight the importance of plume-ridge interaction in order to reconstruct the overall volcanic hotspot record as well as specific smaller features attributed to a certain hotspot. They also demonstrate that it is not necessary to attribute highly complicated properties to a specific plume in order to account for complex observations. Thus, this thesis contributes to the general understanding of plume dynamics and extends the very specific knowledge about the Réunion, Iceland, and Kerguelen mantle plumes.
Global climate change is one of the greatest challenges of the 21st century, with influence on the environment, societies, politics and economies. The (semi-)arid areas of Southern Africa already suffer from water scarcity. There is a great variety of ongoing research related to global climate history but important questions on regional differences still exist.
In southern African regions terrestrial climate archives are rare, which makes paleoclimate studies challenging. Based on the assumption that continental pans (sabkhas) represent a suitable geo-archive for the climate history, two different pans were studied in the southern and western Kalahari Desert. A combined approach of molecular biological and biogeochemical analyses is utilized to investigate the diversity and abundance of microorganisms and to trace temporal and spatial changes in paleoprecipitation in arid environments. The present PhD thesis demonstrates the applicability of pan sediments as a late Quaternary geo-archive based on microbial signature lipid biomarkers, such as archaeol, branched and isoprenoid glycerol dialkyl glycerol tetraethers (GDGTs) as well as phospholipid fatty acids (PLFA). The microbial signatures contained in the sediment provide information on the current or past microbial community from the Last Glacial Maximum to the recent epoch, the Holocene. The results are discussed in the context of regional climate evolution in southwestern Africa. The seasonal shift of the Innertropical Convergence Zone (ITCZ) along the equator influences the distribution of precipitation- and climate zones. The different expansion of the winter- and summer rainfall zones in southern Africa was confirmed by the frequency of certain microbial biomarkers. A period of increased precipitation in the south-western Kalahari could be described as a result of the extension of the winter rainfall zone during the last glacial maximum (21 ± 2 ka). Instead a period of increased paleoprecipitation in the western Kalahari was indicated during the Late Glacial to Holocene transition. This was possibly caused by a southwestern shift in the position of the summer rainfall zone associated to the southward movement of the ITCZ.
Furthermore, for the first time this study characterizes the bacterial and archaeal life based on 16S rRNA gene high-throughput sequencing in continental pan sediments and provides an insight into the recent microbial community structure. Near-surface processes play an important role for the modern microbial ecosystem in the pans. Water availability as well as salinity might determine the abundance and composition of the microbial communities. The microbial community of pan sediments is dominated by halophilic and dry-adapted archaea and bacteria. Frequently occurring microorganisms such as, Halobacteriaceae, Bacillus and Gemmatimonadetes are described in more detail in this study.
The formation and breaching of natural dammed lakes have formed the landscapes, especially in seismically active high-mountain regions. Dammed lakes pose both, potential water resources, and hazard in case of dam breaching. Central Asia has mostly arid and semi-arid climates. Rock glaciers already store more water than ice-glaciers in some semi-arid regions of the world, but their distribution and advance mechanisms are still under debate in recent research. Their impact on the water availability in Central Asia will likely increase as temperatures rise and glaciers diminish.
This thesis provides insight to the relative age distribution of selected Kyrgyz and Kazakh rock glaciers and their single lobes derived from lichenometric dating. The size of roughly 8000 different lichen specimens was used to approximate an exposure age of the underlying debris surface. We showed that rock-glacier movement differs signifcantly on small scales. This has several implications for climatic inferences from rock glaciers. First, reactivation of their lobes does not necessarily point to climatic changes, or at least at out-of-equilibrium conditions. Second, the elevations of rock-glacier toes can no longer be considered as general indicators of the limit of sporadic mountain permafrost as they have been used traditionally.
In the mountainous and seismically active region of Central Asia, natural dams, besides rock glaciers, also play a key role in controlling water and sediment infux into river valleys. However, rock glaciers advancing into valleys seem to be capable of infuencing the stream network, to dam rivers, or to impound lakes. This influence has not previously been addressed. We quantitatively explored these controls using a new inventory of 1300 Central Asian rock glaciers. Elevation, potential incoming solar radiation, and the size of rock glaciers and their feeder basins played key roles in predicting dam appearance. Bayesian techniques were used to credibly distinguish between lichen sizes on rock glaciers and their lobes, and to find those parameters of a rock-glacier system that are most credibly expressing the potential to build natural dams.
To place these studies in the region's history of natural dams, a combination of dating of former lake levels and outburst flood modelling addresses the history and possible outburst flood hypotheses of the second largest mountain lake of the world, Issyk Kul in Kyrgyzstan. Megafoods from breached earthen or glacial dams were found to be a likely explanation for some of the lake's highly fluctuating water levels. However, our detailed analysis of candidate lake sediments and outburst-flood deposits also showed that more localised dam breaks to the west of Issyk Kul could have left similar geomorphic and sedimentary evidence in this Central Asian mountain landscape. We thus caution against readily invoking megafloods as the main cause of lake-level drops of Issyk Kul. In summary, this thesis addresses some new pathways for studying rock glaciers and natural dams with several practical implications for studies on mountain permafrost and natural hazards.
In the arable soil landscape of hummocky ground moraines, an erosion-affected spatial differentiation of soils can be observed. Man-made erosion leads to soil profile modifications along slopes with changed solum thickness and modified properties of soil horizons due to water erosion in combination with tillage operations. Soil erosion creates, thereby, spatial patterns of soil properties (e.g., texture and organic matter content) and differences in crop development. However, little is known about the manner in which water fluxes are affected by soil-crop interactions depending on contrasting properties of differently-developed soil horizons and how water fluxes influence the carbon transport in an eroded landscape. To identify such feedbacks between erosion-induced soil profile modifications and the 1D-water and solute balance, high-precision weighing lysimeters equipped with a wide range of sensor technique were filled with undisturbed soil monoliths that differed in the degree of past soil erosion. Furthermore, lysimeter effluent concentrations were analyzed for dissolved carbon fractions in bi-weekly intervals.
The water balance components measured by high precision lysimeters varied from the most eroded to the less eroded monolith up to 83 % (deep drainage) primarily caused due to varying amounts of precipitation and evapotranspiration for a 3-years period. Here, interactions between crop development and contrasting rainfall interception by above ground biomass could explain differences in water balance components. Concentrations of dissolved carbon in soil water samples were relatively constant in time, suggesting carbon leaching was mainly affected by water fluxes in this observation period. For the lysimeter-based water balance analysis, a filtering scheme was developed considering temporal autocorrelation. The minute-based autocorrelation analysis of mass changes from lysimeter time series revealed characteristic autocorrelation lengths ranging from 23 to 76 minutes. Thereby, temporal autocorrelation provided an optimal approximation of precipitation quantities. However, the high temporal resolution in lysimeter time series is restricted by the lengths of autocorrelation.
Erosion-induced but also gradual changes in soil properties were reflected by dynamics of soil water retention properties in the lysimeter soils. Short-term and long-term hysteretic water retention data suggested seasonal wettability problems of soils increasingly limited rewetting of previously dried pore regions. Differences in water retention were assigned to soil tillage operations and the erosion history at different slope positions. The threedimensional spatial pattern of soil types that result from erosional soil profile modifications were also reflected in differences of crop root development at different landscape positions. Contrasting root densities revealed positive relations of root and aboveground plant characteristics. Differences in the spatially-distributed root growth between different eroded soil types provided indications that root development was affected by the erosion-induced soil evolution processes.
Overall, the current thesis corroborated the hypothesis that erosion-induced soil profile modifications affect the soil water balance, carbon leaching and soil hydraulic properties, but also the crop root system is influenced by erosion-induced spatial patterns of soil properties in the arable hummocky post glacial soil landscape. The results will help to improve model predictions of water and solute movement in arable soils and to understand interactions between soil erosion and carbon pathways regarding sink-or-source terms in landscapes.
Active and passive source data from two seismic experiments within the interdisciplinary project TIPTEQ (from The Incoming Plate to mega Thrust EarthQuake processes) were used to image and identify the structural and petrophysical properties (such as P- and S-velocities, Poisson's ratios, pore pressure, density and amount of fluids) within the Chilean seismogenic coupling zone at 38.25°S, where in 1960 the largest earthquake ever recorded (Mw 9.5) occurred. Two S-wave velocity models calculated using traveltime and noise tomography techniques were merged with an existing velocity model to obtain a 2D S-wave velocity model, which gathered the advantages of each individual model. In a following step, P- and S-reflectivity images of the subduction zone were obtained using different pre stack and post-stack depth migration techniques. Among them, the recent prestack line-drawing depth migration scheme yielded revealing results. Next, synthetic seismograms modelled using the reflectivity method allowed, through their input 1D synthetic P- and S-velocities, to infer the composition and rocks within the subduction zone. Finally, an image of the subduction zone is given, jointly interpreting the results from this work with results from other studies. The Chilean seismogenic coupling zone at 38.25°S shows a continental crust with highly reflective horizontal, as well as (steep) dipping events. Among them, the Lanalhue Fault Zone (LFZ), which is interpreted to be east-dipping, is imaged to very shallow depths. Some steep reflectors are observed for the first time, for example one near the coast, related to high seismicity and another one near the LFZ. Steep shallow reflectivity towards the volcanic arc could be related to a steep west-dipping reflector interpreted as fluids and/or melts, migrating upwards due to material recycling in the continental mantle wedge. The high resolution of the S-velocity model in the first kilometres allowed to identify several sedimentary basins, characterized by very low P- and S-velocities, high Poisson's ratios and possible steep reflectivity. Such high Poisson's ratios are also observed within the oceanic crust, which reaches the seismogenic zone hydrated due to bending-related faulting. It is interpreted to release water until reaching the coast and under the continental mantle wedge. In terms of seismic velocities, the inferred composition and rocks in the continental crust is in agreement with field geology observations at the surface along the proflle. Furthermore, there is no requirement to call on the existence of measurable amounts of present-day fluids above the plate interface in the continental crust of the Coastal Cordillera and the Central Valley in this part of the Chilean convergent margin. A large-scale anisotropy in the continental crust and upper mantle, previously proposed from magnetotelluric studies, is proposed from seismic velocities. However, quantitative studies on this topic in the continental crust of the Chilean seismogenic zone at 38.25°S do not exist to date.
Causes for slow weathering and erosion in the steep, warm, monsoon-subjected Highlands of Sri Lanka
(2018)
In the Highlands of Sri Lanka, erosion and chemical weathering rates are among the lowest for global mountain denudation. In this tropical humid setting, highly weathered deep saprolite profiles have developed from high-grade metamorphic charnockite during spheroidal weathering of the bedrock. The spheroidal weathering produces rounded corestones and spalled rindlets at the rock-saprolite interface. I used detailed textural, mineralogical, chemical, and electron-microscopic (SEM, FIB, TEM) analyses to identify the factors limiting the rate of weathering front advance in the profile, the sequence of weathering reactions, and the underlying mechanisms. The first mineral attacked by weathering was found to be pyroxene initiated by in situ Fe oxidation, followed by in situ biotite oxidation. Bulk dissolution of the primary minerals is best described with a dissolution – re-precipitation process, as no chemical gradients towards the mineral surface and sharp structural boundaries are observed at the nm scale. Only the local oxidation in pyroxene and biotite is better described with an ion by ion process. The first secondary phases are oxides and amorphous precipitates from which secondary minerals (mainly smectite and kaolinite) form. Only for biotite direct solid state transformation to kaolinite is likely. The initial oxidation of pyroxene and biotite takes place in locally restricted areas and is relatively fast: log J = -11 molmin/(m2 s). However, calculated corestone-scale mineral oxidation rates are comparable to corestone-scale mineral dissolution rates: log R = -13 molpx/(m2 s) and log R = -15 molbt/(m2 s). The oxidation reaction results in a volume increase. Volumetric calculations suggest that this observed oxidation leads to the generation of porosity due to the formation of micro-fractures in the minerals and the bedrock allowing for fluid transport and subsequent dissolution of plagioclase. At the scale of the corestone, this fracture reaction is responsible for the larger fractures that lead to spheroidal weathering and to the formation of rindlets. Since these fractures have their origin from the initial oxidational induced volume increase, oxidation is the rate limiting parameter for weathering to take place. The ensuing plagioclase weathering leads to formation of high secondary porosity in the corestone over a distance of only a few cm and eventually to the final disaggregation of bedrock to saprolite. As oxidation is the first weathering reaction, the supply of O2 is a rate-limiting factor for chemical weathering. Hence, the supply of O2 and its consumption at depth connects processes at the weathering front with erosion at the surface in a feedback mechanism. The strength of the feedback depends on the relative weight of advective versus diffusive transport of O2 through the weathering profile. The feedback will be stronger with dominating diffusive transport. The low weathering rate ultimately depends on the transport of O2 through the whole regolith, and on lithological factors such as low bedrock porosity and the amount of Fe-bearing primary minerals. In this regard the low-porosity charnockite with its low content of Fe(II) bearing minerals impedes fast weathering reactions. Fresh weatherable surfaces are a pre-requisite for chemical weathering. However, in the case of the charnockite found in the Sri Lankan Highlands, the only process that generates these surfaces is the fracturing induced by oxidation. Tectonic quiescence in this region and low pre-anthropogenic erosion rate (attributed to a dense vegetation cover) minimize the rejuvenation of the thick and cohesive regolith column, and lowers weathering through the feedback with erosion.
In the wake of 21st century, humanity witnessed a phenomenal raise of urban agglomerations as powerhouses for innovation and socioeconomic growth. Driving much of national (and in few instances even global) economy, such a gargantuan raise of cities is also accompanied by subsequent increase in energy, resource consumption and waste generation. Much of anthropogenic transformation of Earth's environment in terms of environmental pollution at local level to planetary scale in the form of climate change is currently taking place in cities. Projected to be crucibles for entire humanity by the end of this century, the ultimate fate of humanity predominantly lies in the hands of technological innovation, urbanites' attitudes towards energy/resource consumption and development pathways undertaken by current and future cities. Considering the unparalleled energy, resource consumption and emissions currently attributed to global cities, this thesis addresses these issues from an efficiency point of view. More specifically, this thesis addresses the influence of population size, density, economic geography and technology in improving urban greenhouse gas (GHG) emission efficiency and identifies the factors leading to improved eco-efficiency in cities. In order to investigate the in uence of these factors in improving emission and resource efficiency in cities, a multitude of freely available datasets were coupled with some novel methodologies and analytical approaches in this thesis.
Merging the well-established Kaya Identity to the recently developed urban scaling laws, an Urban Kaya Relation is developed to identify whether large cities are more emission efficient and the intrinsic factors leading to such (in)efficiency. Applying Urban Kaya Relation to a global dataset of 61 cities in 12 countries, this thesis identifed that large cities in developed regions of the world will bring emission efficiency gains because of the better technologies implemented in these cities to produce and utilize energy consumption while the opposite is the case for cities in developing regions. Large cities in developing countries are less efficient mainly because of their affluence and lack of efficient technologies. Apart from the in uence of population size on emission efficiency, this thesis identified the crucial role played by population density in improving building and on-road transport sector related emission efficiency in cities. This is achieved by applying the City Clustering Algorithm (CCA) on two different gridded land use datasets and a standard emission inventory to attribute these sectoral emissions to all inhabited settlements in the USA. Results show that doubling the population density would entail a reduction in the total CO2 emissions in buildings and on-road sectors typically by at least 42 %. Irrespective of their population size and density, cities are often blamed for their intensive resource consumption that threatens not only local but also global sustainability. This thesis merged the concept of urban metabolism with benchmarking and identified cities which are eco-efficient. These cities enable better socioeconomic conditions while being less burden to the environment. Three environmental burden indicators (annual average NO2 concentration, per capita waste generation and water consumption) and two socioeconomic indicators (GDP per capita and employment ratio) for 88 most populous European cities are considered in this study. Using two different non-parametric ranking methods namely regression residual ranking and Data Envelopment Analysis (DEA), eco-efficient cities and their determining factors are identified. This in-depth analysis revealed that mature cities with well-established economic structures such as Munich, Stockholm and Oslo are eco-efficient. Further, correlations between objective eco-efficiency ranking with each of the indicator rankings and the ranking of urbanites' subjective perception about quality of life are analyzed. This analysis revealed that urbanites' perception about quality of life is not merely confined to the socioeconomic well-being but rather to their combination with lower environmental burden.
In summary, the findings of this dissertation has three general conclusions for improving emission and ecological efficiency in cities. Firstly, large cities in emerging nations face a huge challenge with respect to improving their emission efficiency. The task in front of these cities is threefold: (1) deploying efficient technologies for the generation of electricity and improvement of public transportation to unlock their leap frogging potential, (2) addressing the issue of energy poverty and (3) ensuring that these cities do not develop similar energy consumption patterns with infrastructure lock-in behavior similar to those of cities in developed regions. Secondly, the on-going urban sprawl as a global phenomenon will decrease the emission efficiency within the building and transportation sector. Therefore, local policy makers should identify adequate fiscal and land use policies to curb urban sprawl. Lastly, since mature cities with well-established economic structures are more eco-efficient and urbanites' perception re ects its combination with decreasing environmental burden; there is a need to adopt and implement strategies which enable socioeconomic growth in cities whilst decreasing their environment burden.
Lithospheric plates move over the low viscosity asthenosphere balancing several forces. The driving forces include basal shear stress exerted by mantle convection and plate boundary forces such as slab pull and ridge push, whereas the resisting forces include inter-plate friction, trench resistance, and cratonic root resistance. These generate plate motions, the lithospheric stress field and dynamic topography which are observed with different geophysical methods. The orientation and tectonic regime of the observed crustal/lithospheric stress field further contribute to our knowledge of different deformation processes occurring within the Earth's crust and lithosphere. Using numerical models previous studies were able to identify major forces generating stresses in the crust and lithosphere which also contribute to the formation of topography as well as driving lithospheric plates. They showed that the first-order stress pattern explaining about 80\,\% of the stress field originates from a balance of forces acting at the base of the moving lithospheric plates due to convective flow in the underlying mantle. The remaining second-order stress pattern is due to lateral density variations in the crust and lithosphere in regions of pronounced topography and high gravitational potential, such as the Himalayas and mid-ocean ridges. By linking global lithosphere dynamics to deep mantle flow this study seeks to evaluate the influence of shallow and deep density heterogenities on plate motions, lithospheric stress field and dynamic topography using the geoid as a major constraint for mantle rheology. We use the global 3D lithosphere-asthenosphere model SLIM3D with visco-elasto-plastic rheology coupled at 300 km depth to a spectral model of mantle flow. The complexity of the lithosphere-asthenosphere component allows for the simulation of power-law rheology with creep parameters accounting for both diffusion and dislocation creep within the uppermost 300 km.
First we investigate the influence of intra-plate friction and asthenospheric viscosity on present-day plate motions. Previous modelling studies have suggested that small friction coefficients (µ < 0.1, yield stress ~ 100 MPa) can lead to plate tectonics in models of mantle convection. Here we show that, in order to match present-day plate motions and net rotation, the frictional parameter must be less than 0.05. We are able to obtain a good fit with the magnitude and orientation of observed plate velocities (NUVEL-1A) in a no-net-rotation (NNR) reference frame with µ < 0.04 and minimum asthenosphere viscosity ~ 5*10e19 Pas to 10e20 Pas. Our estimates of net rotation (NR) of the lithosphere suggest that amplitudes ~ 0.1-0.2 °/Ma, similar to most observation-based estimates, can be obtained with asthenosphere viscosity cutoff values of ~ 10e19 Pas to 5*10e19 Pas and friction coefficient µ < 0.05.
The second part of the study investigates further constraints on shallow and deep mantle heterogeneities causing plate motion by predicting lithosphere stress field and topography and validating with observations. Lithosphere stresses and dynamic topography are computed using the modelling setup and rheological parameters for prescribed plate motions. We validate our results with the World Stress Map 2016 (WSM2016) and the observed residual topography. Here we tested a number of upper mantle thermal-density structures. The one used to calculate plate motions is considered the reference thermal-density structure. This model is derived from a heat flow model combined with a sea floor age model. In addition we used three different thermal-density structures derived from global S-wave velocity models to show the influence of lateral density heterogeneities in the upper 300 km on model predictions. A large portion of the total dynamic force generating stresses in the crust/lithosphere has its origin in the deep mantle, while topography is largely influenced by shallow heterogeneities. For example, there is hardly any difference between the stress orientation patterns predicted with and without consideration of the heterogeneities in the upper mantle density structure across North America, Australia, and North Africa. However, the crust is dominant in areas of high altitude for the stress orientation compared to the all deep mantle contribution.
This study explores the sensitivity of all the considered surface observables with regards to model parameters providing insights into the influence of the asthenosphere and plate boundary rheology on plate motion as we test various thermal-density structures to predict stresses and topography.
More than a billion people rely on water from rivers sourced in High Mountain Asia (HMA), a significant portion of which is derived from snow and glacier melt. Rural communities are heavily dependent on the consistency of runoff, and are highly vulnerable to shifts in their local environment brought on by climate change. Despite this dependence, the impacts of climate change in HMA remain poorly constrained due to poor process understanding, complex terrain, and insufficiently dense in-situ measurements.
HMA's glaciers contain more frozen water than any region outside of the poles. Their extensive retreat is a highly visible and much studied marker of regional and global climate change. However, in many catchments, snow and snowmelt represent a much larger fraction of the yearly water budget than glacial meltwaters. Despite their importance, climate-related changes in HMA's snow resources have not been well studied.
Changes in the volume and distribution of snowpack have complex and extensive impacts on both local and global climates. Eurasian snow cover has been shown to impact the strength and direction of the Indian Summer Monsoon -- which is responsible for much of the precipitation over the Indian Subcontinent -- by modulating earth-surface heating. Shifts in the timing of snowmelt have been shown to limit the productivity of major rangelands, reduce streamflow, modify sediment transport, and impact the spread of vector-borne diseases. However, a large-scale regional study of climate impacts on snow resources had yet to be undertaken.
Passive Microwave (PM) remote sensing is a well-established empirical method of studying snow resources over large areas. Since 1987, there have been consistent daily global PM measurements which can be used to derive an estimate of snow depth, and hence snow-water equivalent (SWE) -- the amount of water stored in snowpack. The SWE estimation algorithms were originally developed for flat and even terrain -- such as the Russian and Canadian Arctic -- and have rarely been used in complex terrain such as HMA.
This dissertation first examines factors present in HMA that could impact the reliability of SWE estimates. Forest cover, absolute snow depth, long-term average wind speeds, and hillslope angle were found to be the strongest controls on SWE measurement reliability. While forest density and snow depth are factors accounted for in modern SWE retrieval algorithms, wind speed and hillslope angle are not. Despite uncertainty in absolute SWE measurements and differences in the magnitude of SWE retrievals between sensors, single-instrument SWE time series were found to be internally consistent and suitable for trend analysis.
Building on this finding, this dissertation tracks changes in SWE across HMA using a statistical decomposition technique. An aggregate decrease in SWE was found (10.6 mm/yr), despite large spatial and seasonal heterogeneities. Winter SWE increased in almost half of HMA, despite general negative trends throughout the rest of the year. The elevation distribution of these negative trends indicates that while changes in SWE have likely impacted glaciers in the region, climate change impacts on these two pieces of the cryosphere are somewhat distinct.
Following the discussion of relative changes in SWE, this dissertation explores changes in the timing of the snowmelt season in HMA using a newly developed algorithm. The algorithm is shown to accurately track the onset and end of the snowmelt season (70% within 5 days of a control dataset, 89% within 10). Using a 29-year time series, changes in the onset, end, and duration of snowmelt are examined. While nearly the entirety of HMA has experienced an earlier end to the snowmelt season, large regions of HMA have seen a later start to the snowmelt season. Snowmelt periods have also decreased in almost all of HMA, indicating that the snowmelt season is generally shortening and ending earlier across HMA.
By examining shifts in both the spatio-temporal distribution of SWE and the timing of the snowmelt season across HMA, we provide a detailed accounting of changes in HMA's snow resources. The overall trend in HMA is towards less SWE storage and a shorter snowmelt season. However, long-term and regional trends conceal distinct seasonal, temporal, and spatial heterogeneity, indicating that changes in snow resources are strongly controlled by local climate and topography, and that inter-annual variability plays a significant role in HMA's snow regime.
Together with the gradual change of mean values, ongoing climate change is projected to increase frequency and amplitude of temperature and precipitation extremes in many regions of Europe. The impacts of such in most cases short term extraordinary climate situations on terrestrial ecosystems are a matter of central interest of recent climate change research, because it can not per se be assumed that known dependencies between climate variables and ecosystems are linearly scalable. So far, yet, there is a high demand for a method to quantify such impacts in terms of simultaneities of event time series.
In the course of this manuscript the new statistical approach of Event Coincidence Analysis (ECA) as well as it's R implementation is introduced, a methodology that allows assessing whether or not two types of event time series exhibit similar sequences of occurrences. Applications of the method are presented, analyzing climate impacts on different temporal and spacial scales: the impact of extraordinary expressions of various climatic variables on tree stem variations (subdaily and local scale), the impact of extreme temperature and precipitation events on the owering time of European shrub species (weekly and country scale), the impact of extreme temperature events on ecosystem health in terms of NDVI (weekly and continental scale) and the impact of El Niño and La Niña events on precipitation anomalies (seasonal and global scale).
The applications presented in this thesis refine already known relationships based on classical methods and also deliver substantial new findings to the scientific community: the widely known positive correlation between flowering time and temperature for example is confirmed to be valid for the tails of the distributions while the widely assumed positive dependency between stem diameter variation and temperature is shown to be not valid for very warm and very cold days. The larger scale investigations underline the sensitivity of anthrogenically shaped landscapes towards temperature extremes in Europe and provide a comprehensive global ENSO impact map for strong precipitation events.
Finally, by publishing the R implementation of the method, this thesis shall enable other researcher to further investigate on similar research questions by using Event Coincidence Analysis.
The central aim of this thesis is to demonstrate the benefits of innovative frequency-based methods to better explain the variability observed in lake ecosystems. Freshwater ecosystems may be the most threatened part of the hydrosphere. Lake ecosystems are particularly sensitive to changes in climate and land use because they integrate disturbances across their entire catchment. This makes understanding the dynamics of lake ecosystems an intriguing and important research priority. This thesis adds new findings to the baseline knowledge regarding variability in lake ecosystems. It provides a literature-based, data-driven and methodological framework for the investigation of variability and patterns in environmental parameters in the time frequency domain.
Observational data often show considerable variability in the environmental parameters of lake ecosystems. This variability is mostly driven by a plethora of periodic and stochastic processes inside and outside the ecosystems. These run in parallel and may operate at vastly different time scales, ranging from seconds to decades. In measured data, all of these signals are superimposed, and dominant processes may obscure the signals of other processes, particularly when analyzing mean values over long time scales. Dominant signals are often caused by phenomena at long time scales like seasonal cycles, and most of these are well understood in the limnological literature. The variability injected by biological, chemical and physical processes operating at smaller time scales is less well understood. However, variability affects the state and health of lake ecosystems at all time scales. Besides measuring time series at sufficiently high temporal resolution, the investigation of the full spectrum of variability requires innovative methods of analysis.
Analyzing observational data in the time frequency domain allows to identify variability at different time scales and facilitates their attribution to specific processes. The merit of this approach is subsequently demonstrated in three case studies. The first study uses a conceptual analysis to demonstrate the importance of time scales for the detection of ecosystem responses to climate change. These responses often occur during critical time windows in the year, may exhibit a time lag and can be driven by the exceedance of thresholds in their drivers. This can only be detected if the temporal resolution of the data is high enough. The second study applies Fast Fourier Transform spectral analysis to two decades of daily water temperature measurements to show how temporal and spatial scales of water temperature variability can serve as an indicator for mixing in a shallow, polymictic lake. The final study uses wavelet coherence as a diagnostic tool for limnology on a multivariate high-frequency data set recorded between the onset of ice cover and a cyanobacteria summer bloom in the year 2009 in a polymictic lake. Synchronicities among limnological and meteorological time series in narrow frequency bands were used to identify and disentangle prevailing limnological processes.
Beyond the novel empirical findings reported in the three case studies, this thesis aims to more generally be of interest to researchers dealing with now increasingly available time series data at high temporal resolution. A set of innovative methods to attribute patterns to processes, their drivers and constraints is provided to help make more efficient use of this kind of data.
The ionosphere, which is strongly influenced by the Sun, is known to be also affected by meteorological processes. These processes, despite having their origin in the troposphere and stratosphere, interact with the upper atmosphere. Such an interaction between atmospheric layers is known as vertical coupling. During geomagnetically quiet times, when near-Earth space is not under the influence of solar storms, these processes become important drivers for ionospheric variability. Studying the link between these processes in the lower atmosphere and the ionospheric variability is important for our understanding of fundamental mechanisms in ionospheric and meteorological research.
A prominent example of vertical coupling between the stratosphere and the ionosphere are the so-called stratospheric sudden warming (SSW) events that occur usually during northern winters and result in an increase in the polar stratospheric temperature and a reversal of the circumpolar winds. While the phenomenon of SSW is confined to the northern polar stratosphere, its influence on the ionosphere can be observed even at equatorial latitudes. During SSW events, the connection between the polar stratosphere and the equatorial ionosphere is believed to be through the modulation of global atmospheric tides. These tides are fundamental for the ionospheric E-region wind dynamo that generates electric fields and currents in the ionosphere. Observations of ionospheric currents indicate a large enhancement of the semidiurnal lunar tide in response to SSW events. Thus, the semidiurnal lunar tide becomes an important driver of ionospheric variability during SSW events.
In this thesis, the ionospheric effect of SSW events is investigated in the equatorial region, where a narrow but an intense E-region current known as the equatorial electrojet (EEJ) flows above the dip equator during the daytime. The day-to-day variability of the EEJ can be determined from magnetic field records at geomagnetic observatories close to the dip equator. Such magnetic data are available for several decades and allows to investigate the impact of SSW events on the EEJ and, even more importantly, helps in understanding the effects of SSW events on the equatorial ionosphere. An excellent long-term record of the geomagnetic field at the equator from 1922 onwards is available for the observatory Huancayo in Peru and is extensively utilized in this study.
The central subject of this thesis is the investigation of lunar tides in the EEJ during SSW events by analyzing long time series. This is done by estimating the lunar tidal amplitude in the EEJ from the magnetic records at Huancayo and by comparing them to measurements of the polar stratospheric wind and temperature, which led to the identification of the known SSW events from 1952 onwards. One goal of this thesis is to identify SSW events that predate 1952. To this end, superposed epoch analysis (SEA) is employed to establish a relationship between the lunar tidal power and the wind and temperature conditions in the lower atmosphere. A threshold value for the lunar tidal power is identified that is discriminative for the known SSW events. This threshold is then used to identify lunar tidal enhancements, which are indicative for any historic SSW events prior to 1952. It can be shown, that the number of lunar tidal enhancements and thus the occurrence frequency of historic SSW events between 1926 and 1952 is similar to the occurrence frequency of the known SSW events from 1952 onwards.
Next to the classic SSW definition, the concept of polar vortex weakening (PVW) is utilized in this thesis. PVW is defined for higher latitudes and altitudes (≈ 40km) than the classical SSW definition (≈ 32km). The correlation between the timing and magnitude of lunar tidal enhancements in the EEJ and the timing and magnitude of PVW is found to be better than for the classic SSW definition. This suggests that the lunar tidal enhancements in the EEJ are closely linked to the state of the middle atmosphere.
Geomagnetic observatories located in different longitudes at the dip equator allow investigating the longitudinally dependent variability of the EEJ during SSW events. For this purpose, the lunar tidal enhancements in the EEJ are determined for the Peruvian and Indian sectors during the major SSW events of the years 2006 and 2009. It is found that the lunar tidal amplitude shows similar enhancements in the Peruvian sector during both SSW events, while the enhancements are notably different for the two events in the Indian sector.
In summary, this thesis shows that lunar tidal enhancements in the EEJ are indeed correlated to the occurrence of SSW events and they should be considered a prominent driver of low latitude ionospheric variability. Secondly, lunar tidal enhancements are found to be longitudinally variable. This suggests that regional effects, such as ionospheric conductivity and the geometry and strength of the geomagnetic field, also play an important role and have to be considered when investigating the mechanisms behind vertical coupling.
Estuarine marshes are ecosystems that are situated at the transition zone between land and water and are thus controlled by physical and biological interactions. Marsh vegetation offers important ecosystem services by filtrating solid and dissolved substances from the water and providing habitat. By buffering a large part of the arriving flow velocity, attenuating wave energy and serving as erosion control for riverbanks, tidal marshes furthermore reduce the destructive effects of storm surges and storm waves and thus contribute to ecosystem-based shore protection. However, in many estuaries, extensive embankments, artificial bank protection, river dredging and agriculture threaten tidal marshes. Global warming might entail additional risks, such as changes in water levels, an increase of the tidal amplitude and a resulting shift of the salinity zones. This can affect the dynamics of the shore and foreland vegetation, and vegetation belts can be narrowed or fragmented. Against this background, it is crucial to gain a better understanding of the processes underlying the spatio temporal vegetation dynamics in brackish marshes. Furthermore, a better understanding of how plant-habitat relationships generate patterns in tidal marsh vegetation is vital to maintain ecosystem functions and assess the response of marshes to environmental change as well as the success of engineering and restoration projects.
For this purpose, three research objectives were addressed within this thesis: (1) to explore the possibility of vegetation serving as self-adaptive shore protection by quantifying the reduction of current velocity in the vegetation belt and the morphologic plasticity of a brackish marsh pioneer, (2) to disentangle the roles of abiotic factors and interspecific competition on species distribution and stand characteristics in brackish marshes, and (3) to develop a mechanistic vegetation model that helps analysing the influence of habitat conditions on the spatio-temporal dynamic of tidal marsh vegetation. These aspects were investigated using a combination of field studies and statistical as well as process-based modelling.
To explore the possibility of vegetation serving as self-adaptive coastal protection, in the first study, we measured current velocity with and without living vegetation, recorded ramet density and plant thickness during two growing periods at two locations in the Elbe estuary and assessed the adaptive value of a larger stem diameter of plants at locations with higher mechanical stress by biomechanical measurements. The results of this study show that under non-storm conditions, the vegetation belt of the marsh pioneer Bolboschoenus maritimus is able to buffer a large proportion of the flow velocity. We were furthermore able to show that morphological traits of plant species are adapted to hydrodynamic forces by demonstrating a positive correlation between ramet thickness and cross-shore current. In addition, our measurements revealed that thicker ramets growing at the front of the vegetation belt have a significantly higher stability than ramets inside the vegetation belt. This self-adaptive effect improves the ability of B. maritimus to grow and persist in the pioneer zone and could provide an adaptive value in habitats with high mechanical stress.
In the second study, we assessed the distribution of the two marsh species and a set of stand characteristics, namely aboveground and belowground biomass, ramet density, ramet height and the percentage of flowering ramets. Furthermore, we collected information on several abiotic habitat factors to test their effect on plant growth and zonation with generalised linear models (GLMs). Our results demonstrate that flow velocity is the main factor controlling the distribution of Bolboschoenus maritimus and Phragmites australis. Additionally, inundation height and duration, as well as intraspecific competition affect distribution patterns. This study furthermore shows that cross-shore flow velocity does not only directly influence the distribution of the two marsh species, but also alters the plants’ occurrence relative to inun-dation height and duration. This suggests an effect of cross-shore flow velocity on their tolerance to inundation. The analysis of the measured stand characteristics revealed a negative effect of total flow velocity on all measured parameters of B. maritimus and thus confirmed our expectation that flow velocity is a decisive stressor which influences the growth of this species.
To gain a better understanding of the processes and habitat factors influencing the spatio-temporal vegetation dynamics in brackish marshes, I built a spatially explicit, mechanistic model applying a pattern-oriented modelling approach. A sensitivity analysis of the para-meters of this dynamic habitat-macrophyte model HaMac suggests that rhizome growth is the key process for the lateral dynamics of brackish marshes. From the analysed habitat factors, P. australis patterns were mainly influenced by flow velocity. The competition with P. australis was of key importance for the belowground biomass of B. maritimus. Concerning vegetation dynamics, the model results emphasise that without the effect of flow velocity the B. maritimus vegetation belt would expand into the tidal flat at locations with present vegetation recession, suggesting that flow velocity is the main reason for vegetation recession at exposed locations.
Overall, the results of this thesis demonstrate that brackish marsh vegetation considerably contributes to flow reduction under average flow conditions and can hence be a valuable component of shore-protection schemes. At the same time, the distribution, growth and expansion of tidal marsh vegetation is substantially influenced by flow. Altogether, this thesis provides a clear step forward in understanding plant-habitat interactions in tidal marshes. Future research should integrate studies of vertical marsh accretion with research on the factors that control the lateral position of marshes.
Information on the contemporary in-situ stress state of the earth’s crust is essential for geotechnical applications and physics-based seismic hazard assessment. Yet, stress data records for a data point are incomplete and their availability is usually not dense enough to allow conclusive statements. This demands a thorough examination of the in-situ stress field which is achieved by 3D geomechanicalnumerical models. However, the models spatial resolution is limited and the resulting local stress state is subject to large uncertainties that confine the significance of the findings. In addition, temporal variations of the in-situ stress field are naturally or anthropogenically induced. In my thesis I address these challenges in three manuscripts that investigate (1) the current crustal stress field orientation, (2) the 3D geomechanical-numerical modelling of the in-situ stress state, and (3) the phenomenon of injection induced temporal stress tensor rotations. In the first manuscript I present the first comprehensive stress data compilation of Iceland with 495 data records. Therefore, I analysed image logs from 57 boreholes in Iceland for indicators of the orientation of the maximum horizontal stress component. The study is the first stress survey from different kinds of stress indicators in a geologically very young and tectonically active area of an onshore spreading ridge. It reveals a distinct stress field with a depth independent stress orientation even very close to the spreading centre. In the second manuscript I present a calibrated 3D geomechanical-numerical modelling approach of the in-situ stress state of the Bavarian Molasse Basin that investigates the regional (70x70x10km³) and local (10x10x10km³) stress state. To link these two models I develop a multi-stage modelling approach that provides a reliable and efficient method to derive from the larger scale model initial and boundary conditions for the smaller scale model. Furthermore, I quantify the uncertainties in the models results which are inherent to geomechanical-numerical modelling in general and the multi-stage approach in particular. I show that the significance of the models results is mainly reduced due to the uncertainties in the material properties and the low number of available stress magnitude data records for calibration. In the third manuscript I investigate the phenomenon of injection induced temporal stress tensor rotation and its controlling factors. I conduct a sensitivity study with a 3D generic thermo-hydro-mechanical model. I show that the key control factors for the stress tensor rotation are the permeability as the decisive factor, the injection rate, and the initial differential stress. In particular for enhanced geothermal systems with a low permeability large rotations of the stress tensor are indicated. According to these findings the estimation of the initial differential stress in a reservoir is possible provided the permeability is known and the angle of stress rotation is observed. I propose that the stress tensor rotations can be a key factor in terms of the potential for induced seismicity on pre-existing faults due to the reorientation of the stress field that changes the optimal orientation of faults.
To what extent cities can be made sustainable under the mega-trends of urbanization and climate change remains a matter of unresolved scientific debate. Our inability in answering this question lies partly in the deficient knowledge regarding pivotal humanenvironment interactions. Regarded as the most well documented anthropogenic climate modification, the urban heat island (UHI) effect – the warmth of urban areas relative to the rural hinterland – has raised great public health concerns globally. Worse still, heat waves are being observed and are projected to increase in both frequency and intensity, which further impairs the well-being of urban dwellers. Albeit with a substantial increase in the number of publications on UHI in the recent decades, the diverse urban-rural definitions applied in previous studies have remarkably hampered the general comparability of results achieved. In addition, few studies have attempted to synergize the land use data and thermal remote sensing to systematically assess UHI and its contributing factors.
Given these research gaps, this work presents a general framework to systematically quantify the UHI effect based on an automated algorithm, whereby cities are defined as clusters of maximum spatial continuity on the basis of land use data, with their rural hinterland being defined analogously. By combining land use data with spatially explicit surface skin temperatures from satellites, the surface UHI intensity can be calculated in a consistent and robust manner. This facilitates monitoring, benchmarking, and categorizing UHI intensities for cities across scales. In light of this innovation, the relationship between city size and UHI intensity has been investigated, as well as the contributions of urban form indicators to the UHI intensity.
This work delivers manifold contributions to the understanding of the UHI, which have complemented and advanced a number of previous studies. Firstly, a log-linear relationship between surface UHI intensity and city size has been confirmed among the 5,000 European cities. The relationship can be extended to a log-logistic one, when taking a wider range of small-sized cities into account. Secondly, this work reveals a complex interplay between UHI intensity and urban form. City size is found to have the strongest influence on the UHI intensity, followed by the fractality and the anisometry. However, their relative contributions to the surface UHI intensity depict a pronounced regional heterogeneity, indicating the importance of considering spatial patterns of UHI while implementing UHI adaptation measures.
Lastly, this work presents a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves, implying a phase shift between the time series of UHI intensity and background temperatures. Combining satellite observation and urban boundary layer simulation, the seasonal variations of UHI are assessed from both screen and skin levels. Taking London as an example, this work ascribes the discrepancies between the seasonality observed at different levels mainly to the peculiarities of surface skin temperatures associated with the incoming solar radiation. In addition, the efforts in classifying cities according to their UHI characteristics highlight the important role of regional climates in determining the UHI.
This work serves as one of the first studies conducted to systematically and statistically scrutinize the UHI. The outcomes of this work are of particular relevance for the overall spatial planning and regulation at meso- and macro levels in order to harness the benefits of rapid urbanization, while proactively minimizing its ensuing thermal stress.
Underground coal gasification (UCG) has the potential to increase worldwide coal reserves by developing coal resources, currently not economically extractable by conventional mining methods. For that purpose, coal is combusted in situ to produce a high-calorific synthesis gas with different end-use options, including electricity generation as well as production of fuels and chemical feedstock. Apart from the high economic potentials, UCG may induce site‐specific environmental impacts, including ground surface subsidence and pollutant migration of UCG by-products into shallow freshwater aquifers. Sustainable and efficient UCG operation requires a thorough understanding of the coupled thermal, hydraulic and mechanical processes, occurring in the UCG reactor vicinity. The development and infrastructure costs of UCG trials are very high; therefore, numerical simulations of coupled processes in UCG are essential for the assessment of potential environmental impacts. Therefore, the aim of the present study is to assess UCG-induced permeability changes, potential hydraulic short circuit formation and non-isothermal multiphase fluid flow dynamics by means of coupled numerical simulations. Simulation results on permeability changes in the UCG reactor vicinity demonstrate that temperature-dependent thermo-mechanical parameters have to be considered in near-field assessments, only. Hence, far-field simulations do not become inaccurate, but benefit from increased computational efficiency when thermo-mechanical parameters are maintained constant. Simulations on potential hydraulic short circuit formation between single UCG reactors at regional-scale emphasize that geologic faults may induce hydraulic connections, and thus compromise efficient UCG operation. In this context, the steam jacket surrounding high-temperature UCG reactors plays a vital role in avoiding UCG by-products escaping into freshwater aquifers and in minimizing energy consumption by formation fluid evaporation. A steam jacket emerges in the close reactor vicinity due to phase transition of formation water and is a non-isothermal flow phenomenon. Considering this complex multiphase flow behavior, an innovative conceptual modeling approach, validated against field data, enables the quantification and prediction of UCG reactor water balances. The findings of this doctoral thesis provide an important basis for integration of thermo-hydro-mechanical simulations in UCG, required for the assessment and mitigation of its potential environmental impacts as well as optimization of its efficiency.
Natural and potentially hazardous events occur on the Earth’s surface every day. The most destructive of these processes must be monitored, because they may cause loss of lives, infrastructure, and natural resources, or have a negative effect on the environment. A variety of remote sensing technologies allow the recoding of data to detect these processes in the first place, partly based on the diagnostic landforms that they form. To perform this effectively, automatic methods are desirable.
Universal detection of natural hazards is challenging due to their differences in spatial impacts, timing and longevity of consequences, and the spatial resolution of remote-sensing data. Previous studies have reported that topographic metrics such as roughness, which can be captured from digital elevation data, can reveal landforms diagnostic of natural hazards, such as gullies, dunes, lava fields, landslides and snow avalanches, as these landforms tend to be more heterogeneous than the surrounding landscape. A single roughness metric is often limited in such detections; however, a more complex approach that exploits the spatial relation and the location of objects, such as object-based image analysis (OBIA), is desirable.
In this thesis, I propose a topographic roughness measure derived from an airborne laser scanning (ALS) digital terrain model (DTM) and discuss its performance in detecting landforms principally diagnostic of natural hazards. I further develop OBIA-based algorithms for the detection of snow avalanches using near-infrared (NIR) aerial images, and the size (changes) of mountain lakes using LANDSAT satellite images. I quantitatively test and document how the level of difficulty in detecting these very challenging landforms depends on the input data resolution, the derivatives that could be evaluated from images and DTMs, the size, shape and complexity of landforms, and the capabilities of obtaining the information in the data. I demonstrate that surface roughness is a promising metric for detecting different landforms in diverse environments, and that OBIA assists significantly in detecting parts of lakes and snow avalanches that may not be correctly assigned by applying only the thresholding of spectral properties of data and their derivatives.
The curvature-based surface roughness parameter allows the detection of gullies, dunes, lava fields and landslides with a user’s accuracy of 0.63, 0.21, 0.53, and 0.45, respectively. The OBIA algorithms for detecting lakes and snow avalanches obtained user’s accuracy of 0.98, and 0.78, respectively. Most of the analysed landforms constituted only a small part of the entire dataset, and therefore the user’s accuracy is the most appropriate performance measure that should be given in a such classification, because it tells how many automatically-extracted pixels in fact represent the object that one wants to classify, and its calculation does not take the second (background) class into account. One advantage of the proposed roughness parameter is that it allows the extraction of the heterogeneity of the surface without the need for data detrending. The OBIA approach is novel in that it allows the classification of lakes regardless of the physical state of their water, and also allows the separation of frozen lakes from glaciers that have very similar water indices used in purely optical remote sensing applications. The algorithm proposed for snow avalanches allows the detection of release zones, tracks, and deposition zones by verifying the snow heterogeneity based on a roughness metric evaluated from a water index, and by analysing the local relation of segments with their neighbouring objects. This algorithm contains few steps, which allows for the simultaneous classification of avalanches that occur on diverse mountain slopes and differ in size and shape.
This thesis contributes to natural hazard research as it provides automatic solutions to tracking six different landforms that are diagnostic of natural hazards over large regions. This is a step toward delineating areas susceptible to the processes producing these landforms and the improvement of hazard maps.
Detection and Kirchhoff-type migration of seismic events by use of a new characteristic function
(2017)
The classical method of seismic event localization is based on the picking of body wave arrivals, ray tracing and inversion of travel time data. Travel time picks with small uncertainties are required to produce reliable and accurate results with this kind of source localization. Hence recordings, with a low Signal-to-Noise Ratio (SNR) cannot be used in a travel time based inversion. Low SNR can be related with weak signals from distant and/or low magnitude sources as well as with a high level of ambient noise. Diffraction stacking is considered as an alternative seismic event localization method that enables also the processing of low SNR recordings by mean of stacking the amplitudes of seismograms along a travel time function. The location of seismic event and its origin time are determined based on the highest stacked amplitudes (coherency) of the image function. The method promotes an automatic processing since it does not need travel time picks as input data.
However, applying diffraction stacking may require longer computation times if only limited computer resources are used. Furthermore, a simple diffraction stacking of recorded amplitudes could possibly fail to locate the seismic sources if the focal mechanism leads to complex radiation patterns which typically holds for both natural and induced seismicity.
In my PhD project, I have developed a new work flow for the localization of seismic events which is based on a diffraction stacking approach. A parallelized code was implemented for the calculation of travel time tables and for the determination of an image function to reduce computation time. In order to address the effects from complex source radiation patterns, I also suggest to compute diffraction stacking from a characteristic function (CF) instead of stacking the original wave form data. A new CF, which is called in the following mAIC (modified from Akaike Information Criterion) is proposed. I demonstrate that, the performance of the mAIC does not depend on the chosen length of the analyzed time window and that both P- and S-wave onsets can be detected accurately. To avoid cross-talk between P- and S-waves due to inaccurate velocity models, I separate the P- and S-waves from the mAIC function by making use of polarization attributes. Then, eventually the final image function is represented by the largest eigenvalue as a result of the covariance analysis between P- and S-image functions. Before applying diffraction stacking, I also apply seismogram denoising by using Otsu thresholding in the time-frequency domain.
Results from synthetic experiments show that the proposed diffraction stacking provides reliable results even from seismograms with low SNR=1. Tests with different presentations of the synthetic seismograms (displacement, velocity, and acceleration) shown that, acceleration seismograms deliver better results in case of high SNR, whereas displacement seismograms provide more accurate results in case of low SNR recordings. In another test, different measures (maximum amplitude, other statistical parameters) were used to determine the source location in the final image function. I found that the statistical approach is the preferred method particularly for low SNR.
The work flow of my diffraction stacking method was finally applied to local earthquake data from Sumatra, Indonesia. Recordings from a temporary network of 42 stations deployed for 9 months around the Tarutung pull-apart Basin were analyzed. The seismic event locations resulting from the diffraction stacking method align along a segment of the Sumatran Fault. A more complex distribution of seismicity is imaged within and around the Tarutung Basin. Two lineaments striking N-S were found in the middle of the Tarutung Basin which support independent results from structural geology. These features are interpreted as opening fractures due to local extension. A cluster of seismic events repeatedly occurred in short time which might be related to fluid drainage since two hot springs are observed at the surface near to this cluster.
Borehole instabilities are frequently encountered when drilling through finely laminated, organic rich shales (Økland and Cook, 1998; Ottesen, 2010; etc.); such instabilities should be avoided to assure a successful exploitation and safe production of the contained unconventional hydrocarbons. Borehole instabilities, such as borehole breakouts or drilling induced tensile fractures, may lead to poor cementing of the borehole annulus, difficulties with recording and interpretation of geophysical logs, low directional control and in the worst case the loss of the well. If these problems are not recognized and expertly remedied, pollution of the groundwater or the emission of gases into the atmosphere can occur since the migration paths of the hydrocarbons in the subsurface are not yet fully understood (e.g., Davies et al., 2014; Zoback et al., 2010). In addition, it is often mentioned that the drilling problems encountered and the resulting downtimes of the wellbore system in finely laminated shales significantly increase drilling costs (Fjaer et al., 2008; Aadnoy and Ong, 2003).
In order to understand and reduce the borehole instabilities during drilling in unconventional shales, we investigate stress-induced irregular extensions of the borehole diameter, which are also referred to as borehole breakouts. For this purpose, experiments with different borehole diameters, bedding plane angles and stress boundary conditions were performed on finely laminated Posidonia shales. The Lower Jurassic Posidonia shale is one of the most productive source rocks for conventional reservoirs in Europe and has the greatest potential for unconventional oil and gas in Europe (Littke et al., 2011).
In this work, Posidonia shale specimens from the North (PN) and South (PS) German basins were selected and characterized petrophysically and mechanically. The composition of the two shales is dominated by calcite (47-56%) followed by clays (23-28%) and quartz (16-17%). The remaining components are mainly pyrite and organic matter. The porosity of the shales varies considerably and is up to 10% for PS and 1% for PN, which is due to a larger deposition depth of PN. Both shales show marked elasticity and strength anisotropy, which can be attributed to a macroscopic distribution and orientation of soft and hard minerals. Under load the hard minerals form a load-bearing, supporting structure, while the soft minerals compensate the deformation. Therefore, if loaded parallel to the bedding, the Posidonia shale is more brittle than loaded normal to the bedding. The resulting elastic anisotropy, which can be defined by the ratio of the modulus of elasticity parallel and normal to the bedding, is about 50%, while the strength anisotropy (i.e., the ratio of uniaxial compressive strength normal and parallel to the bedding) is up to 66%. Based on the petrophysical characterization of the two rocks, a transverse isotropy (TVI) was derived. In general, PS is softer and weaker than PN, which is due to the stronger compaction of the material due to the higher burial depth.
Conventional triaxial borehole breakout experiments on specimens with different borehole diameters showed that, when the diameter of the borehole is increased, the stress required to initiate borehole breakout decreases to a constant value. This value can be expressed as the ratio of the tangential stress and the uniaxial compressive strength of the rock. The ratio increases exponentially with decreasing borehole diameter from about 2.5 for a 10 mm diameter hole to ~ 7 for a 1 mm borehole (increase of initiation stress by 280%) and can be described by a fracture mechanic based criterion. The reduction in borehole diameter is therefore a considerable aspect in reducing the risk of breakouts. New drilling techniques with significantly reduced borehole diameters, such as "fish-bone" holes, are already underway and are currently being tested (e.g., Xing et al., 2012).
The observed strength anisotropy and the TVI material behavior are also reflected in the observed breakout processes at the borehole wall. Drill holes normal to the bedding develop breakouts in a plane of isotropy and are not affected by the strength or elasticity anisotropy. The observed breakouts are point-symmetric and form compressive shear failure planes, which can be predicted by a Mohr-Coulomb failure approach. If the shear failure planes intersect, conjugate breakouts can be described as "dog-eared” breakouts.
While the initiation of breakouts for wells oriented normal to the stratification has been triggered by random local defects, reduced strengths parallel to bedding planes are the starting point for breakouts for wells parallel to the bedding. In the case of a deflected borehole trajectory, therefore, the observed failure type changes from shear-induced failure surfaces to buckling failure of individual layer packages. In addition, the breakout depths and widths increased, resulting in a stress-induced enlargement of the borehole cross-section and an increased output of rock material into the borehole. With the transition from shear to buckling failure and changing bedding plane angle with respect to the borehole axis, the stress required for inducing wellbore breakouts drops by 65%.
These observations under conventional triaxial stress boundary conditions could also be confirmed under true triaxial stress conditions. Here breakouts grew into the rock as a result of buckling failure, too. In this process, the broken layer packs rotate into the pressure-free drill hole and detach themselves from the surrounding rock by tensile cracking. The final breakout shape in Posidonia shale can be described as trapezoidal when the bedding planes are parallel to the greatest horizontal stress and to the borehole axis. In the event that the largest horizontal stress is normal to the stratification, breakouts were formed entirely by shear fractures between the stratification and required higher stresses to initiate similar to breakouts in conventional triaxial experiments with boreholes oriented normal to the bedding.
In the content of this work, a fracture mechanics-based failure criterion for conventional triaxial loading conditions in isotropic rocks (Dresen et al., 2010) has been successfully extended to true triaxial loading conditions in the transverse isotropic rock to predict the initiation of borehole breakouts. The criterion was successfully verified on the experiments carried out.
The extended failure criterion and the conclusions from the laboratory and numerical work may help to reduce the risk of borehole breakouts in unconventional shales.
Intracontinental deformation usually is a result of tectonic forces associated with distant plate collisions. In general, the evolution of mountain ranges and basins in this environment is strongly controlled by the distribution and geometries of preexisting structures. Thus, predictive models usually fail in forecasting the deformation evolution in these kinds of settings. Detailed information on each range and basin-fill is vital to comprehend the evolution of intracontinental mountain belts and basins. In this dissertation, I have investigated the complex Cenozoic tectonic evolution of the western Tien Shan in Central Asia, which is one of the most active intracontinental ranges in the world. The work presented here combines a broad array of datasets, including thermo- and geochronology, paleoenvironmental interpretations, sediment provenance and subsurface interpretations in order to track changes in tectonic deformation. Most of the identified changes are connected and can be related to regional-scale processes that governed the evolution of the western Tien Shan.
The NW-SE trending Talas-Fergana fault (TFF) separates the western from the central Tien Shan and constitutes a world-class example of the influence of preexisting anisotropies on the subsequent structural development of a contractile orogen. While to the east most of ranges and basins have a sub-parallel E-W trend, the triangular-shaped Fergana basin forms a substantial feature in the western Tien Shan morphology with ranges on all three sides. In this thesis, I present 55 new thermochronologic ages (apatite fission track and zircon (U-Th)/He)) used to constrain exhumation histories of several mountain ranges in the western Tien Shan. At the same time, I analyzed the Fergana basin-fill looking for progressive changes in sedimentary paleoenvironments, source areas and stratal geometrical configurations in the subsurface and outcrops.
The data presented in this thesis suggests that low cooling rates (<1°C Myr-1), calm depositional environments, and low depositional rates (<10 m Myr-1) were widely distributed across the western Tien Shan, describing a quiescent tectonic period throughout the Paleogene. Increased cooling rates in the late Cenozoic occurred diachronously and with variable magnitudes in different ranges. This rapid cooling stage is interpreted to represent increased erosion caused by active deformation and constrains the onset of Cenozoic deformation in the western Tien Shan. Time-temperature histories derived from the northwestern Tien Shan samples show an increase in cooling rates by ~25 Ma. This event is correlated with a synchronous pulse
iv
in the South Tien Shan. I suggest that strike-slip motion along the TFF commenced at the Oligo-Miocene boundary, facilitating CCW rotation of the Fergana basin and enabling exhumation of the linked horsetail splays. Higher depositional rates (~150 m Myr-1) in the Oligo-Miocene section (Massaget Fm.) of the Fergana basin suggest synchronous deformation in the surrounding ranges. The central Alai Range also experienced rapid cooling around this time, suggesting that the onset of intramontane basin fragmentation and isolation is coeval. These results point to deformation starting simultaneously in the late Oligocene – early Miocene in geographically distant mountain ranges. I suggest that these early uplifts are controlled by reactivated structures (like the TFF), which are probably the frictionally weakest and most-suitably oriented for accommodating and transferring N-S horizontal shortening along the western Tien Shan.
Afterwards, in the late Miocene (~10 Ma), a period of renewed rapid cooling affected the Tien Shan and most mountain ranges and inherited structures started to actively deform. This episode is widely distributed and an increase in exhumation is interpreted in most of the sampled ranges. Moreover, the Pliocene section in the basin subsurface shows the higher depositional rates (>180 m Myr-1) and higher energy facies. The deformation and exhumation increase further contributed to intramontane basin partitioning. Overall, the interpretation is that the Tien Shan and much of Central Asia suffered a global increase in the rate of horizontal crustal shortening. Previously, stress transfer along the rigid Tarim block or Pamir indentation has been proposed to account for Himalayan hinterland deformation. However, the extent of the episode requires a different and broader geodynamic driver.
The Yukon Coast in Canada is an ice-rich permafrost coast and highly sensitive to changing environmental conditions. Retrogressive thaw slumps are a common thermoerosion feature along this coast, and develop through the thawing of exposed ice-rich permafrost on slopes and removal of accumulating debris. They contribute large amounts of sediment, including organic carbon and nitrogen, to the nearshore zone.
The objective of this study was to 1) identify the climatic and geomorphological drivers of sediment-meltwater release, 2) quantify the amount of released meltwater, sediment, organic carbon and nitrogen, and 3) project the evolution of sediment-meltwater release of retrogressive thaw slumps in a changing future climate.
The analysis is based on data collected over 18 days in July 2013 and 18 days in August 2012. A cut-throat flume was set up in the main sediment-meltwater channel of the largest retrogressive thaw slump on Herschel Island. In addition, two weather stations, one on top of the undisturbed tundra and one on the slump floor, measured incoming solar radiation, air temperature, wind speed and precipitation. The discharge volume eroding from the ice-rich permafrost and retreating snowbanks was measured and compared to the meteorological data collected in real time with a resolution of one minute.
The results show that the release of sediment-meltwater from thawing of the ice-rich permafrost headwall is strongly related to snowmelt, incoming solar radiation and air temperature. Snowmelt led to seasonal differences, especially due to the additional contribution of water to the eroding sediment-meltwater from headwall ablation, lead to dilution of the sediment-meltwater composition. Incoming solar radiation and air temperature were the main drivers for diurnal and inter-diurnal fluctuations. In July (2013), the retrogressive thaw slump released about 25 000 m³ of sediment-meltwater, containing 225 kg dissolved organic carbon and 2050 t of sediment, which in turn included 33 t organic carbon, and 4 t total nitrogen. In August (2012), just 15 600 m³ of sediment-meltwater was released, since there was no additional contribution from snowmelt. However, even without the additional dilution, 281 kg dissolved organic carbon was released. The sediment concentration was twice as high as in July, with sediment contents of up to 457 g l-1 and 3058 t of sediment, including 53 t organic carbon and 5 t nitrogen, being released.
In addition, the data from the 36 days of observations from Slump D were upscaled to cover the main summer season of 1 July to 31 August (62 days) and to include all 229 active retrogressive thaw slumps along the Yukon Coast. In total, all retrogressive thaw slumps along the Yukon Coast contribute a minimum of 1.4 Mio. m³ sediment-meltwater each thawing season, containing a minimum of 172 000 t sediment with 3119 t organic carbon, 327 t nitrogen and 17 t dissolved organic carbon. Therefore, in addition to the coastal erosion input to the Beaufort Sea, retrogressive thaw slumps additionally release 3 % of sediment and 8 % of organic carbon into the ocean. Finally, the future evolution of retrogressive thaw slumps under a warming scenario with summer air temperatures increasing by 2-3 °C by 2081-2100, would lead to an increase of 109-114% in release of sediment-meltwater.
It can be concluded that retrogressive thaw slumps are sensitive to climatic conditions and under projected future Arctic warming will contribute larger amounts of thawed permafrost material (including organic carbon and nitrogen) into the environment.