Refine
Has Fulltext
- no (9)
Year of publication
- 2015 (9) (remove)
Language
- English (9) (remove)
Is part of the Bibliography
- yes (9)
Keywords
- Chile convergent margin (1)
- Coastal uplift (1)
- Earthquake (1)
- Himalaya (1)
- LiDAR (1)
- Marine terraces (1)
- Maule earthquake (1)
- Permanent uplift (1)
- Seismotectonic segmentation (1)
- Seismoturbidites (1)
Institute
- Institut für Geowissenschaften (9) (remove)
Timing and magnitude of surface uplift are key to understanding the impact of crustal deformation and topographic growth on atmospheric circulation, environmental conditions, and surface processes. Uplift of the East African Plateau is linked to mantle processes, but paleoaltimetry data are too scarce to constrain plateau evolution and subsequent vertical motions associated with rifting. Here, we assess the paleotopographic implications of a beaked whale fossil (Ziphiidae) from the Turkana region of Kenya found 740 km inland from the present-day coastline of the Indian Ocean at an elevation of 620 m. The specimen is similar to 17 My old and represents the oldest derived beaked whale known, consistent with molecular estimates of the emergence of modern straptoothed whales (Mesoplodon). The whale traveled from the Indian Ocean inland along an eastward-directed drainage system controlled by the Cretaceous Anza Graben and was stranded slightly above sea level. Surface uplift from near sea level coincides with paleoclimatic change from a humid environment to highly variable and much drier conditions, which altered biotic communities and drove evolution in east Africa, including that of primates.
The response of surface processes to climatic forcing is fundamental for understanding the impacts of climate change on landscape evolution. In the Himalaya, most large rivers feature prominent fill terraces that record an imbalance between sediment supply and transport capacity, presumably due to past fluctuations in monsoon precipitation and/or effects of glaciation at high elevation. Here, we present volume estimates, chronological constraints, and Be-10-derived paleo-erosion rates from a prominent valley fill in the Yamuna catchment, Garhwal Himalaya, to elucidate the coupled response of rivers and hillslopes to Pleistocene climate change. Although precise age control is complicated due to methodological problems, the new data support formation of the valley fill during the late Pleistocene and its incision during the Holocene. We interpret this timing to indicate that changes in discharge and river-transport capacity were major controls. Compared to the present day, late Pleistocene hillslope erosion rates were higher by a factor of similar to 2-4, but appear to have decreased during valley aggradation. The higher late Pleistocene erosion rates are largely unrelated to glacial erosion and could be explained by enhanced sediment production on steep hillslopes due to increased periglacial activity that declined as temperatures increased. Alternatively, erosion rates that decrease during valley aggradation are also consistent with reduced landsliding from threshold hillslopes as a result of rising base levels. In that case, the similarity of paleo-erosion rates near the end of the aggradation period with modern erosion rates might imply that channels and hillslopes are not yet fully coupled everywhere and that present-day hillslope erosion rates may underrepresent long-term incision rates. (C) 2015 Elsevier B.V. All rights reserved.
Understanding the rates and pattern of erosion is a key aspect of deciphering the impacts of climate and tectonics on landscape evolution. Denudation rates derived from terrestrial cosmogenic nuclides (TCNs) are commonly used to quantify erosion and bridge tectonic (Myr) and climatic (up to several kiloyears) time scales. However, how the processes of erosion in active orogens are ultimately reflected in Be-10 TCN samples remains a topic of discussion. We investigate this problem in the Arun Valley of eastern Nepal with 34 new Be-10-derived catchment-mean denudation rates. The Arun Valley is characterized by steep north-south gradients in topography and climate. Locally, denudation rates increase northward, from <0.2mmyr(-1) to similar to 1.5mmyr(-1) in tributary samples, while main stem samples appear to increase downstream from similar to 0.2mmyr(-1) at the border with Tibet to 0.91mmyr(-1) in the foreland. Denudation rates most strongly correlate with normalized channel steepness (R-2=0.67), which has been commonly interpreted to indicate tectonic activity. Significant downstream decrease of Be-10 concentration in the main stem Arun suggests that upstream sediment grains are fining to the point that they are operationally excluded from the processed sample. This results in Be-10 concentrations and denudation rates that do not uniformly represent the upstream catchment area. We observe strong impacts on Be-10 concentrations from local, nonfluvial geomorphic processes, such as glaciation and landsliding coinciding with areas of peak rainfall rates, pointing toward climatic modulation of predominantly tectonically driven denudation rates.
Thick sedimentary fills in intermontane valleys are common in formerly glaciated mountain ranges but difficult to quantify. Yet knowledge of the fill thickness distribution could help to estimate sediment budgets of mountain belts and to decipher the role of stored material in modulating sediment flux from the orogen to the foreland. Here we present a new approach to estimate valley fill thickness and bedrock topography based on the geometric properties of a landscape using artificial neural networks. We test the potential of this approach following a four-tiered procedure. First, experiments with synthetic, idealized landscapes show that increasing variability in surface slopes requires successively more complex network configurations. Second, in experiments with artificially filled natural landscapes, we find that fill volumes can be estimated with an error below 20%. Third, in natural examples with valley fill surfaces that have steeply inclined slopes, such as the Unteraar and the Rhone Glaciers in the Swiss Alps, for example, the average deviation of cross-sectional area between the measured and the modeled valley fill is 26% and 27%, respectively. Finally, application of the method to the Rhone Valley, an overdeepened glacial valley in the Swiss Alps, yields a total estimated sediment volume of 9711km(3) and an average deviation of cross-sectional area between measurements and model estimates of 21.5%. Our new method allows for rapid assessment of sediment volumes in intermontane valleys while eliminating most of the subjectivity that is typically inherent in other methods where bedrock reconstructions are based on digital elevation models.
The segmentation of major fault systems in subduction zones controls earthquake magnitude and location, but the causes for the existence of segment boundaries and the relationships between long-term deformation and the extent of earthquake rupture, are poorly understood. We compare permanent and seismic-cycle deformation patterns along the rupture zone of the 2010 Maule earthquake (M8.8), which ruptured 500 km of the Chile subduction margin. We analyzed the morphology of MIS-5 marine terraces using LiDAR topography and established their chronology and coeval origin with twelve luminescence ages, stratigraphy and geomorphic correlation, obtaining a virtually continuous distribution of uplift rates along the entire rupture zone. The mean uplift rate for these terraces is 0.5 m/ka. This value is exceeded in three areas, which have experienced rapid emergence of up to 1.6 m/ka; they are located at the northern, central, and southern sectors of the rupture zone, referred to as Topocalma, Carranza and Arauco, respectively. The three sectors correlate with boundaries of eight great earthquakes dating back to 1730. The Topocalma and Arauco sectors, located at the boundaries of the 2010 rupture, consist of broad zones of crustal warping with wavelengths of 60 and 90 km, respectively. These two regions coincide with the axes of oroclinal bending of the entire Andean margin and correlate with changes in curvature of the plate interface. Rapid uplift at Carranza, in turn, is of shorter wavelength and associated with footwall flexure of three crustal-scale normal faults. The uplift rate at Carranza is inversely correlated with plate coupling as well as with coseismic slip, suggesting permanent deformation may accumulate interseismically. We propose that the zones of upwarping at Arauco and Topocalma reflect changes in frictional properties of the megathrust resulting in barriers to the propagation of great earthquakes. Slip during the 1960 (M9.5) and 2010 events overlapped with the similar to 90-km-long zone of rapid uplift at Arauco; similarly, slip in 2010 and 1906 extended across the similar to 60-km-long section of the megathrust at Topocalma, but this area was completely breached by the 1730 (M similar to 9) event, which propagated southward until Carranza. Both Arauco and Topocalma show evidence of sustained rapid uplift since at least the middle Pleistocene. These two sectors might thus constitute discrete seismotectonic boundaries restraining most, but not all great earthquake ruptures. Based on our observations, such barriers might be breached during multi-segment super-cycle events. (C) 2015 Elsevier Ltd. All rights reserved.
Newly acquired high-resolution bathymetric data (with 5 m and 2 m grid sizes) from the continental shelf off Concepcion (Chile), in combination with seismic reflection profiles, reveal a distinctly different evolution for the Biobio submarine canyon compared to that of one of its tributaries. Both canyons are incised into the shelf of the active margin. Whereas the inner shelf appears to be mantled with unconsolidated sediment, the outer shelf shows the influence of strong bottom currents that form drifts of loose sediment and transport -material into the Biobio submarine canyon and onto the continental slope.
The main stem of the Biobio Canyon is connected to the mouth of the Biobio River and currently provides a conduit for terrestrial sediment from the continental shelf to the deep seafloor. In contrast, the head of its tributary closest to the coast is located similar to 24 km offshore of the present-day coastline at 120 m water depth, and it is subject to passive sedimentation. However, canyon activity within the study area is interpreted to be controlled not only by the direct input of fluvial sediments into the canyon head facilitated by the river-mouth to canyon-head connection, but also by input from southward-directed bottom currents and possibly longshore drift. In addition, about 24 km offshore of the present-day coastline, the main stem of the Biobio Canyon has steep canyon walls next to sites of active tectonic deformation that are prone to wall failure. Mass-failure events may also foster turbidity currents and contribute to canyon feeding. In contrast, the tributary has less steep canyon walls with limited evidence of canyon-wall failure and is located down-system of bottom currents from the Biobio Canyon. It consequently receives neither fluvial nor longshore sediments. Therefore, the canyon's connectivity to fluvial or longshore sediment delivery pathways is affected by the distance of the canyon head from the coastline and the orientation of the canyon axis relative to the direction of bottom currents.
The ability of a submarine canyon to act as an active conduit for large quantities of terrestrial sediment toward the deep sea during sea-level highstands may be controlled by several different conditions simultaneously. These include bottom current direction, structural deformation of the seafloor affecting canyon location and orientation as well as canyon-wall failure, shelf gradient and associated distance from the canyon head to the coast, and fluvial networks. The complex interplay between these factors may vary even within an individual canyon system, resulting in distinct levels of canyon activity on a regional scale.
Much progress has been made in estimating recurrence intervals of great and giant subduction earthquakes using terrestrial, lacustrine, and marine paleoseismic archives. Recent detailed records suggest these earthquakes may have variable recurrence periods and magnitudes forming supercycles. Understanding seismic supercycles requires long paleoseismic archives that record timing and magnitude of such events. Turbidite paleoseismic archives may potentially extend past earthquake records to the Pleistocene and can thus complement commonly shorter-term terrestrial archives. However, in order to unambiguously establish recurring seismicity as a trigger mechanism for turbidity currents, synchronous deposition of turbidites in widely spaced, isolated depocenters has to be ascertained. Furthermore, characteristics that predispose a seismically active continental margin to turbidite paleoseismology and the correct sample site selection have to be taken into account.
Here we analyze 8 marine sediment cores along 950 km of the Chile margin to test for the feasibility of compiling detailed and continuous paleoseismic records based on turbidites. Our results suggest that the deposition of areally widespread, synchronous turbidites triggered by seismicity is largely controlled by sediment supply and, hence, the climatic and geomorphic conditions of the adjacent subaerial setting. The feasibility of compiling a turbidite paleoseismic record depends on the delicate balance between sufficient sediment supply providing material to fail frequently during seismic shaking and sufficiently low sedimentation rates to allow for coeval accumulation of planktonic foraminifera for high-resolution radiocarbon dating.
We conclude that offshore northern central Chile (29-32.5 degrees S) Holocene turbidite paleoseismology is not feasible, because sediment supply from the semi-arid mainland is low and almost no Holocene turbidity-current deposits are found in the cores. In contrast, in the humid region between 36 and 38 degrees S frequent Holocene turbidite deposition may generally correspond to paleoseismic events. However, high terrigenous sedimentation rates prevent high-resolution radiocarbon dating. The climatic transition region between 32.5 and 36 degrees S appears to be best suited for turbidite paleoseismology. (C) 2015 Elsevier Ltd. All rights reserved.
The idea that climatically modulated erosion may impact orogenic processes has challenged geoscientists for decades. Although modeling studies and physical calculations have provided a solid theoretical basis supporting this interaction, to date, field-based work has produced inconclusive results. The central-western Alborz Mountains in the northern sectors of the Arabia-Eurasia collision zone constitute a promising area to explore these potential feedbacks. This region is characterized by asymmetric precipitation superimposed on an orogen with a history of spatiotemporal changes in exhumation rates, deformation patterns, and prolonged, km-scale base-level changes. Our analysis suggests that despite the existence of a strong climatic gradient at least since 17.5 Ma, the early orogenic evolution (from similar to 36 to 9-6 Ma) was characterized by decoupled orographic precipitation and tectonics. In particular, faster exhumation and sedimentation along the more arid southern orogenic flank point to a north-directed accretionary flux and underthrusting of Central Iran. Conversely, from 6 to 3 Ma, erosion rates along the northern orogenic flank became higher than those in the south, where they dropped to minimum values. This change occurred during a similar to 3-Myr-long, km-scale base-level lowering event in the Caspian Sea. We speculate that mass redistribution processes along the northern flank of the Alborz and presumably across all mountain belts adjacent to the South Caspian Basin and more stable areas of the Eurasian plate increased the sediment load in the basin and ultimately led to the underthrusting of the Caspian Basin beneath the Alborz Mountains. This underthrusting in turn triggered a new phase of northward orogenic expansion, transformed the wetter northern flank into a new pro-wedge, and led to the establishment of apparent steady-state conditions along the northern orogenic flank (i.e., rock uplift equal to erosion rates). Conversely, the southern mountain front became the retro-wedge and experienced limited tectonic activity. These observations overall raise the possibility that mass-distribution processes during a pronounced erosion phase driven by base-level changes may have contributed to the inferred regional plate-tectonic reorganization of the northern Arabia-Eurasia collision during the last similar to 5 Ma. (C) 2015 Elsevier B.V. All rights reserved.
The mechanisms by which climate and vegetation affect erosion rates over various time scales lie at the heart of understanding landscape response to climate change. Plot-scale field experiments show that increased vegetation cover slows erosion, implying that faster erosion should occur under low to moderate vegetation cover. However, demonstrating this concept over long time scales and across landscapes has proven to be difficult, especially in settings complicated by tectonic forcing and variable slopes. We investigate this problem by measuring cosmogenic Be-10-derived catchment-mean denudation rates across a range of climate zones and hillslope gradients in the Kenya Rift, and by comparing our results with those published from the Rwenzori Mountains of Uganda. We find that denudation rates from sparsely vegetated parts of the Kenya Rift are up to 0.13 mm/yr, while those from humid and more densely vegetated parts of the Kenya Rift flanks and the Rwenzori Mountains reach a maximum of 0.08 mm/yr, despite higher median hillslope gradients. While differences in lithology and recent land-use changes likely affect the denudation rates and vegetation cover values in some of our studied catchments, hillslope gradient and vegetation cover appear to explain most of the variation in denudation rates across the study area. Our results support the idea that changing vegetation cover can contribute to complex erosional responses to climate or land-use change and that vegetation cover can play an important role in determining the steady-state slopes of mountain belts through its stabilizing effects on the land surface.