Refine
Has Fulltext
- yes (2)
Document Type
- Doctoral Thesis (2) (remove)
Is part of the Bibliography
- yes (2)
Keywords
- Copolymere (2) (remove)
Institute
The remarkable antifouling properties of zwitterionic polymers in controlled environments are often counteracted by their delicate mechanical stability. In order to improve the mechanical stabilities of zwitterionic hydrogels, the effect of increased crosslinker densities was thus explored. In a first approach, terpolymers of zwitterionic monomer 3-[N -2(methacryloyloxy)ethyl-N,N-dimethyl]ammonio propane-1-sulfonate (SPE), hydrophobic monomer butyl methacrylate (BMA), and photo-crosslinker 2-(4-benzoylphenoxy)ethyl methacrylate (BPEMA) were synthesized. Thin hydrogel coatings of the copolymers were then produced and photo-crosslinked. Studies of the swollen hydrogel films showed that not only the mechanical stability but also, unexpectedly, the antifouling properties were improved by the presence of hydrophobic BMA units in the terpolymers.
Based on the positive results shown by the amphiphilic terpolymers and in order to further test the impact that hydrophobicity has on both the antifouling properties of zwitterionic hydrogels and on their mechanical stability, a new amphiphilic zwitterionic methacrylic monomer, 3-((2-(methacryloyloxy)hexyl)dimethylammonio)propane-1-sulfonate (M1), was synthesized in good yields in a multistep synthesis. Homopolymers of M1 were obtained by free-radical polymerization. Similarly, terpolymers of M1, zwitterionic monomer SPE, and photo-crosslinker BPEMA were synthesized by free-radical copolymerization and thoroughly characterized, including its solubilities in selected solvents.
Also, a new family of vinyl amide zwitterionic monomomers, namely 3-(dimethyl(2-(N -vinylacetamido)ethyl)ammonio)propane-1-sulfonate (M2), 4-(dimethyl(2-(N-vinylacetamido)ethyl)ammonio)butane-1-sulfonate (M3), and 3-(dimethyl(2-(N-vinylacetamido)ethyl)ammonio)propyl sulfate (M4), together with the new photo-crosslinker 4-benzoyl-N-vinylbenzamide (M5) that is well-suited for copolymerization with vinylamides, are introduced within the scope of the present work. The monomers are synthesized with good yields developing a multistep synthesis. Homopolymers of the new vinyl amide zwitterionic monomers are obtained by free-radical polymerization and thoroughly characterized. From the solubility tests, it is remarkable that the homopolymers produced are fully soluble in water, evidence of their high hydrophilicity. Copolymerization of the vinyl amide zwitterionic monomers, M2, M3, and M4 with the vinyl amide photo-crosslinker M5 proved to require very specific polymerization conditions. Nevertheless, copolymers were successfully obtained by free-radical copolymerization under appropriate conditions.
Moreover, in an attempt to mitigate the intrinsic hydrophobicity introduced in the copolymers by the photo-crosslinkers, and based on the proven affinity of quaternized diallylamines to copolymerize with vinyl amides, a new quaternized diallylamine sulfobetaine photo-crosslinker 3-(diallyl(2-(4-benzoylphenoxy)ethyl)ammonio)propane-1-sulfonate (M6) is synthesized. However, despite a priori promising copolymerization suitability, copolymerization with the vinyl amide zwitterionic monomers could not be achieved.
Chemische und physikalische Eigenschaften von Polymeren können verschiedene Zelltypen unterschiedlich, z. B. hinsichtlich Adhärenz oder Funktionalität, beeinflussen. Die Elastizität eines Polymers beeinflusst vor allem, welche Zugkräfte eine Zelle gegenüber ihrem Substrat entwickeln kann. Das Zellverhalten wird dann über intrazelluläre Rückkopplungsmechanismen reguliert. Die Oberflächenladung und/oder Hydrophilie eines Polymers beeinflusst zunächst die Adsorption von Ionen, Proteinen und anderen Molekülen. Vor allem über die Zusammensetzung, Dichte und Konformation der adsorbierten Komponenten werden anschließend die Wechselwirkungen mit den Zellen vermittelt. Des Weiteren können verschiedene Zelltypen unterschiedliche membranassoziierte Proteine, Zucker und Lipide aufweisen, so dass Polymereigenschaften zellspezifische Effekte bewirken können. Für biotechnologische Anwendungen und für den Einsatz in der regenerativen Medizin gewinnen Polymere, die spezifische Zellreaktionen regulieren können, immer weiter an Bedeutung. Die Isolierung und Kultur von primären Keratinozyten ist noch immer anspruchsvoll und die adäquate Heilung von Hautwunden stellt eine fortwährende medizinische Herausforderung dar. Ein Polymer, das eine bevorzugte Adhärenz von Keratinozyten bei gleichzeitig verminderter Anheftung dermaler Fibroblasten ermöglicht, würde erhebliche Vorteile für den Einsatz in der Keratinozyten-Zellkultur und als Wundauflage bieten. Um den potentiell spezifischen Einfluss bestimmter Polymereigenschaften auf primäre humane Keratinozyten und dermale Fibroblasten zu untersuchen, wurde in der vorliegenden Arbeit ein Zellkultursystem für die Mono- und Cokultur beider Zelltypen entwickelt. Das Testsystem wurde als Screening konzipiert, um den Einfluss unterschiedlicher Polymereigenschaften in mehreren Abstufungen auf die Zellen zu untersuchen. Folgende Parameter wurden untersucht: 1. Vitalität und Dichte adhärenter und nicht-adhärierter Zellen, 2. Schädigung der Zellmembran, 3. selektive Adhärenz von Keratinozyten in Cokultur durch die spezifische immunzytochemische Färbung von Keratin14 und Vimentin. Für die Polymere mit variabler Elastizität wurden zusätzlich die Ablagerung extrazellulärer Matrixkomponenten und die Sekretion löslicher Faktoren durch die Zellen untersucht. Als Modellpolymere für die Variation der Elastizität wurden vernetzte Poly(n-butylacrylate) (cPnBA) verwendet, da deren Elastizität durch den Anteil des Vernetzers eingestellt werden kann. Auf dem weniger elastischen cPnBA zeigte sich in der Cokultur ein doppelt so hohes Verhältnis von Keratinozyten zu Fibroblasten wie auf dem elastischeren cPnBA, so dass ein leichter zellselektiver Effekt angenommen werden kann. Acrylnitril-basierte Copolymere wurden als Modellpolymere für die Variation der Oberflächenladung und Hydrophilie verwendet, da die Eigenschaften durch Art und molaren Anteil des Comonomers eingestellt werden können. Durch Variation des molaren Anteils der Comonomere mit positiver bzw. negativer Ladung, Methacrylsäure-2-aminoethylester-hydrochhlorid (AEMA) und N-3-Aminopropyl-methacrylamid-hydro-chlorid (APMA) bzw. Natriumsalz der 2-Methyl-2-propen-1-sulfonsäure (NaMAS), wurde der Anteil der positiven bzw. negativen Ladung im Copolymer variiert. Durch die Erhöhung des molaren Anteils des hydrophilen Comonomers N-Vinylpyrrolidon (NVP) wurde die Hydrophilie des Copolymers gesteigert. Die Erhöhung des molaren Anteils an positiv geladenem Comonomer AEMA im Copolymer führte tendenziell zu einer höheren Keratinozytendichte, wobei die Fibroblastendichte unverändert blieb. Durch die Erhöhung des molaren Anteils des positiv geladenen Comonomers APMA ergaben sich keine deutlichen Unterschiede in Dichte, Vitalität oder Selektivität der Zellen. Durch die stufenweise Erhöhung des molaren Anteils des negativ geladenen Comonomers NaMAS konnte, wie im Falle von AEMA, eine Tendenz zur verbesserten Keratinozytenadhärenz beobachtet werden. Die Steigerung der Hydrophilie der Copolymere führte sowohl für Keratinozyten als auch für Fibroblasten zu einer reduzierten Adhärenz und Vitalität. In der vorliegenden Doktorarbeit wurde ein Testverfahren etabliert, das die Untersuchung von primären humanen Keratinozyten und primären humanen Fibroblasten in Monokultur und Cokultur auf verschiedenen Polymeren ermöglicht. Die bisherigen Ergebnisse zeigen, dass sich durch die gezielte Modifizierung verschiedener Polymereigenschaften die Adhärenz und Vitalität beider Zelltypen beeinflussen lässt. Die Reduktion der Elastizität sowie die Erhöhung des molaren Anteils geladener Comonomere führten zu einer Zunahme der Keratinozytenadhärenz. Da die Fibroblasten unbeeinflusst blieben, zeigte sich für einige der untersuchten Polymere eine leichte Zellselektivität. Diese könnte durch die weitere Erhöhung der Steifigkeit oder des Anteils geladener Comonomere möglicherweise weiter gesteigert werden.