Refine
Has Fulltext
- yes (3)
Year of publication
- 2005 (3)
Document Type
- Doctoral Thesis (3)
Language
- German (3) (remove)
Is part of the Bibliography
- yes (3)
Keywords
- Polyelektrolyt (3) (remove)
Institute
Der Adhäsionsprozess an Cellulosefasern sollte bis hin zur molekularen Ebene aufgeklärt werden. Zuerst wurde eine definierte Celluloseoberfläche durch Aufschleudern hergestellt und eingehend charakterisiert wurde. Die Beschaffenheit der Oberfläche ist stark abhängig von der Konzentration Celluloselösung, die für das Aufschleudern benutzt wurde. Für geringe Konzentrationen bildete sich ein Netzwerk von Cellulosefibrillen über die Siliziumoberfläche aus. In einem mittleren Bereich wurden geschlossene Filme mit Dicken zwischen 1,5 und ca. 10 nm erhalten. Diese Filme wiesen eine Rauhigkeit unter 2 nm auf, was der Größe eines Cellulosemoleküls entspräche. Mit höheren Konzentrationen wurden die Filme dicker und auch rauer. Die molekular glatten Cellulosefilme wurden zur Untersuchung der Adhäsionseigenschaften zwischen Celluloseoberflächen und ihrer Modifikation durch den Einfluss von Haftvermittlern (Polyelektrolyte) eingesetzt. Dafür wurde das Haftungsvermögen von Celluloseperlen auf der glatten Celluloseoberfläche analysiert. Die Adhäsion der Celluloseperlen hängt dabei von der Menge und von der Art des adsorbierten Polyelektrolyts ab. Geringe Polyelektrolytkonzentrationen ermöglichen wegen der teilweisen Bedeckung der Celluloseoberflächen eine Verstärkung der Haftvermittlung (Adhäsion). Höhere Konzentrationen an Polyelektrolyten bedecken die Celluloseoberfläche komplett, so dass die Symmetrie der Polyelektrolytadsorption entscheidend wird. Wenn Celluloseperlen und glatte Celluloseoberfläche gleichzeitig mit Polyelektrolyten beschichtet werden verringert sich bei hohen Konzentrationen die Adhäsion erheblich. Ein hohes Maß an Adhäsion wird dagegen erreicht, wenn nur eine der beiden gegenüberliegende Celluloseoberflächen separat beschichtet und dann in Kontakt mit der anderen gebracht Oberfläche wurde. Der Einfluss einer äußeren Kraft auf die haftenden Celluloseperlen wurde untersucht, um eine Aussage über die auftretenden Adhäsionskräfte machen zu können. Dafür wurde eine spezielle Strömungszelle entwickelt, mit der die Bewegung von Celluloseperlen beobachtet werden kann. Je nach Ausrichtung der Strömungszelle bewegten sich die Celluloseperlen unterschiedlich schnell. War die Strömungszelle horizontal ausgerichtet, wirkte zusätzlich zur Adhäsionskraft noch die Gravitation auf die Oberfläche, so dass hier eine wesentlich langsamere Durchschnittsgeschwindigkeit ermittelt wurde als für die Messungen in vertikaler Ausrichtung. Die Zugabe von verschiedenen Polyelektrolyten bei den Messungen mit der Strömungszelle hatte einen erheblichen Einfluss auf die Beweglichkeit der haftenden Celluloseperlen. Bei geringen Polyelektrolytkonzentrationen wurde das Potential der einzelnen Polyelektrolyten zur effektiven Haftvermittlung durch eine signifikant geringere Durchschnittsgeschwindigkeit der rollenden Celluloseperlen sichtbar. Aus der kritischen Anfangsgeschwindigkeit der rollenden Celluloseperlen wurde die Adhäsionsarbeit errechnet, die für die Bewegung nötig ist.
Das Superoxidradikal kann mit fast allen Bestandteilen von Zellen reagieren und diese schädigen. Die medizinische Forschung stellte eine Beteiligung des Radikals an Krebs, Herzinfarkten und neuraler Degeneration fest. Ein empfindlicher Superoxidnachweis ist daher zum besseren Verständnis von Krankheitsverläufen wichtig. Dabei stellen die geringen typischen Konzentrationen und seine kurze Lebensdauer große Anforderungen. Ziel dieser Arbeit war es zum einen, zwei neuartige Proteinarchitekturen auf Metallelektroden zu entwickeln und deren elektrochemisches Ansprechverhalten zu charakterisieren. Zum anderen waren diese Elektroden zur empfindlichen quantitativen Superoxiddetektion einzusetzen. Im ersten Teil der Arbeit wurde eine Protein-Multischichtelektrode aus Cytochrom c und dem Polyelektrolyten Poly(anilinsulfonsäure) nach dem Layer-by-layer-Verfahren aufgebaut. Für zwei bis 15 Schichten an Protein wurde eine deutliche Zunahme an elektrodenaktivem Cytochrom c mit jedem zusätzlichen Aufbringungsschritt nachgewiesen. Die Zunahme verlief linear und ergab bei 15 Schichten eine Zunahme der redoxaktiven Proteinmenge um deutlich mehr als eine Größenordnung. Während das formale Potential im Multischichtsystem sich im Vergleich zur Monoschichtelektrode nicht veränderte, wurde für die Kinetik eine Abhängigkeit der Geschwindigkeit des Elektronentransfers von der Zahl der Proteinschichten beobachtet. Mit zunehmender Scangeschwindigkeit trat ein reversibler Kontaktverlust zu den äußeren Schichten auf. Die lineare Zunahme an elektroaktivem Protein mit steigender Zahl an Depositionsschritten unterscheidet sich deutlich von in der Literatur beschriebenen Protein/Polyelektrolyt-Multischichtelektroden, bei denen ab etwa 6-8 Schichten keine Zunahme an elektroaktivem Protein mehr festgestelltwurde. Auch ist bei diesen die Zunahme an kontaktierbaren Proteinmolekülen auf das Zwei- bis Fünffache limitiert. Diese Unterschiede des neu vorgestellten Systems zu bisherigen Multischichtassemblaten erklärt sich aus einem in dieser Arbeit für derartige Systeme erstmals beschriebenen Elektronentransfermechanismus. Der Transport von Elektronen zwischen der Elektrodenoberfläche und den Proteinmolekülen in den Schichten verläuft über einen Protein-Protein-Elektronenaustausch. Dieser Mechanismus beruht auf dem schnellen Selbstaustausch von Cytochrom c-Molekülen und einer verbleibenden Rotationsflexibilität des Proteins im Multischichtsystem. Die Reduzierung des Proteins durch das Superoxidradikal und eine anschließende Reoxidation durch die Elektrode konnten nachgewiesen werden. In einem amperometrischen Messansatz wurde das durch Superoxidradikale hervorgerufene elektrochemische Signal in Abhängigkeit von der Zahl an Proteinschichten gemessen. Ein maximales Ansprechverhalten auf das Radikal wurde mit 6-Schichtelektroden erzielt. Die Empfindlichkeit der 6-Schichtelektroden wurde im Vergleich zum Literaturwert der Monoschichtelektrode um Faktor 14, also mehr als eine Größenordnung, verbessert. Somit konnte eine Elektrode mit 6 Schichten aus Cytochrom c und Poly(anilinsulfonsäure) als neuartiger Superoxidsensor mit einer 14-fachen Verbesserung der Empfindlichkeit im Vergleich zum bislang benutzten System entwickelt werden. Der zweite Teil dieser Arbeit beschreibt die Auswahl, Gewinnung und Charakterisierung von Mutanten des Proteins Cu,Zn-Superoxiddismutase zur elektrochemischen Quantifizierung von Superoxidradikalen. Monomere Mutanten des humanen dimeren Enzyms wurden entworfen, die durch Austausch von Aminosäuren ein oder zwei zusätzliche Cysteinreste besaßen, mit welchem sie direkt auf der Goldelektrodenoberfläche chemisorbieren sollten. 6 derartige Mutanten konnten in ausreichender Menge und Reinheit in aktiver Form gewonnen werden. Die Bindung der Superoxiddismutase-Mutanten an Goldoberflächen konnte durch Oberflächen-plasmonresonanz und Impedanzspektroskopie nachgewiesen werden. Alle Mutanten wiesen einen quasi-reversiblen Elektronentransfer zwischen SOD und Elektrode auf. Durch Untersuchung von kupferfreien SOD-Mutanten sowie des Wildtyps konnte nachgewiesen werden, das die Mutanten über die eingefügten Cysteinreste auf der Elektrode chemisorptiv gebunden wurden und der Elektronentransfer zwischen der Elektrode und dem Kupfer im aktiven Zentrum der SOD erfolgte. Die Superoxiddismutase katalysiert die Zersetzung von Superoxidmolekülen durch Oxidation und durch Reduktion der Radikale. Somit sind beide Teilreaktionen von analytischem Interesse. Zyklovoltammetrisch konnte sowohl die Oxidation als auch die Reduktion des Radikals durch die immobilisierten Superoxiddismutase-Mutanten nachgewiesen werden. In amperometrischen Messanordnungen konnten beide Teilreaktionen zur analytischen Quantifizierung von Superoxidradikalen genutzt werden. Im positiven Potentialfenster wurde die Empfindlichkeit um einen Faktor von etwa 10 gegenüber der Cytochrom c–Monoschichtelektrode verbessert.
Die vorliegende Arbeit beschäftigte sich mit zwei Themengebieten. Es ging zum einen um die mechanischen Eigenschaften von Polyelektrolythohlkapseln und zum anderen um die Adhäsion von Polyelektrolythohlkapseln. Die mechanischen Eigenschaften wurden mit der AFM „colloidal probe” Technik untersucht. Dabei zeigte sich, dass die Kraftdeformationskurven für kleine Deformationen den nach der Schalentheorie vorhergesagten linearen Verlauf haben. Ebenso wurde die quadratische Abhängigkeit der Federkonstanten von der Dicke bestätigt. Für PAH/PSS findet man einen E-Modul von 0.25 GPa. Zusammen mit der Tatsache, dass die Deformationskurven unabhängig von der Geschwindigkeit sind und praktisch keine Hysterese zeigen, sowie der Möglichkeit die Kapseln plastisch zu deformieren, kann man schließen, dass das System in einem glasartigen Zustand vorliegt. <pt>Erwartungsgemäß zeigte der pH einen starken Einfluss auf die PEM. Während in einem pH-Bereich zwischen 2 und 11.5 keine morphologischen Änderungen festgestellt werden konnten, vergrößerte sich der Radius bei pH = 12 um bis zu 50 %. Diese Radienänderung war reversibel und ging einher mit einem sichtbaren Weicherwerden der Kapseln. Eine Abnahme des E-Moduls um mindestens drei Größenordungen wurde durch Kraftdeformationsmessungen bestätigt. Die Kraftdeformationskurven zeigen eine starke Hysterese. Das System befindet sich nun nicht mehr in einem glasartigen Zustand, sondern ist viskos bis gummiartig geworden. Messungen an Kapseln, die mit Glutardialdehyd behandelt wurden, zeigten, dass die Behandlung das pH-abhängige Verhalten verändert. Dies kann darauf zurückgeführt werden, dass das PAH durch den Glutardialdehyd quervernetzt wird. Bei einem hohen Quervernetzungsgrad, zeigen die Kapseln keine Änderung des mechanischen Verhaltens bei pH = 12. Schwach quervernetzte Kapseln werden immer noch signifikant weicher bei pH = 12, jedoch ändert sich der Radius nicht. Außerdem wurden Multilagenkapseln untersucht, deren Stabilität nicht auf elektrostatischen Wechselwirkungen sondern auf Wasserstoffbrückenbindungen beruhte. Diese Kapseln zeigten eine deutlich höhere Steifigkeit mit E-Modulen bis zu 1 GPa. Es wurde gefunden, dass auch dieses System für kleine Deformationen ein lineares Kraft-Deformationsverhalten zeigt, und dass die Federkonstante quadratisch von der Dicke abhängt. Die Kapseln lösen sich praktisch sofort bei pH = 6.5 auf. In der Nähe dieses pHs konnte das Abnehmen der Federkonstanten verfolgt werden. Außerdem wurde das Adhäsionsverhalten von PAH/PSS Kapseln auf mit PEI-beschichtetem Glas untersucht. Die Adhäsionsflächen waren zu einem großen Teil rund und ließen sich quantitativ auswerten. Der Adhäsionsradius nimmt mit dem Kapselradius zu und mit der Dicke ab. Das Verhalten konnte mit zwei Modellen, einem für die große und einem für die kleine Deformation beschrieben werden. Das große Deformationsmodell liefert um eine Größenordung niedrigere Adhäsionsenergien als das kleine Deformationsmodell, welches mit Werten von ‑0.2 mJ/m<sup>2 Werte in einem plausiblen Bereich liefert. Es wurde gefunden, dass bei einem Verhältnis von Dicke zu Deformation von etwa eins "buckling" auftritt. Dieser Punkt markierte zugleich den Übergang von der großen zur kleinen Deformation.