Refine
Document Type
- Article (8)
- Doctoral Thesis (4)
- Postprint (3)
Language
- English (15)
Is part of the Bibliography
- yes (15) (remove)
Keywords
- biomass (15) (remove)
The use of organic materials with reversible redox activity holds enormous potential for next-generation Li-ion energy storage devices. Yet, most candidates are not truly sustainable, i.e., not derived from renewable feedstock or made in benign reactions. Here an attempt is reported to resolve this issue by synthesizing an organic cathode material from tannic acid and microporous carbon derived from biomass. All constituents, including the redox-active material and conductive carbon additive, are made from renewable resources. Using a simple, sustainable fabrication method, a hybrid material is formed. The low cost and ecofriendly material shows outstanding performance with a capacity of 108 mAh g(-1) at 0.1 A g(-1) and low capacity fading, retaining approximately 80% of the maximum capacity after 90 cycles. With approximately 3.4 V versus Li+/Li, the cells also feature one of the highest reversible redox potentials reported for biomolecular cathodes. Finally, the quinone-catecholate redox mechanism responsible for the high capacity of tannic acid is confirmed by electrochemical characterization of a model compound similar to tannic acid but without catecholic groups.
The use of organic materials with reversible redox activity holds enormous potential for next-generation Li-ion energy storage devices. Yet, most candidates are not truly sustainable, i.e., not derived from renewable feedstock or made in benign reactions. Here an attempt is reported to resolve this issue by synthesizing an organic cathode material from tannic acid and microporous carbon derived from biomass. All constituents, including the redox-active material and conductive carbon additive, are made from renewable resources. Using a simple, sustainable fabrication method, a hybrid material is formed. The low cost and ecofriendly material shows outstanding performance with a capacity of 108 mAh g(-1) at 0.1 A g(-1) and low capacity fading, retaining approximately 80% of the maximum capacity after 90 cycles. With approximately 3.4 V versus Li+/Li, the cells also feature one of the highest reversible redox potentials reported for biomolecular cathodes. Finally, the quinone-catecholate redox mechanism responsible for the high capacity of tannic acid is confirmed by electrochemical characterization of a model compound similar to tannic acid but without catecholic groups.
The sustainability of agro-bioenergy systems is dependent on many factors, some local or regional in implementation, some others global in nature. This study assessed the effects of often ignored local and regional factors (e.g. alternative agronomic factor options, alternative agricultural production systems, alternative biomass flows, alternative conversion technologies etc. The results from this study suggests that key to enhancing the energy efficiency (and by extension the sustainability) of agro-bioenergy systems is paying attention to local and regional factors such as biomass conversion technology, alternative agronomic factor options, alternative agricultural production systems and available biomass flows.
Landscapes in high northern latitudes are assumed to be highly sensitive to future global change, but the rates and long-term trajectories of changes are rather uncertain. In the boreal zone, fires are an important factor in climate-vegetation interactions and biogeochemical cycles. Fire regimes are characterized by small, frequent, low-intensity fires within summergreen boreal forests dominated by larch, whereas evergreen boreal forests dominated by spruce and pine burn large areas less frequently but at higher intensities. Here, we explore the potential of the monosaccharide anhydrides (MA) levoglucosan, mannosan and galactosan to serve as proxies of low-intensity biomass burning in glacial-to-interglacial lake sediments from the high northern latitudes. We use sediments from Lake El'gygytgyn (cores PG 1351 and ICDP 5011-1), located in the far north-east of Russia, and study glacial and interglacial samples of the last 430 kyr (marine isotope stages 5e, 6, 7e, 8, 11c and 12) that had different climate and biome configurations. Combined with pollen and non-pollen palynomorph records from the same samples, we assess how far the modern relationships between fire, climate and vegetation persisted during the past, on orbital to centennial timescales. We find that MAs attached to particulates were well-preserved in up to 430 kyr old sediments with higher influxes from low-intensity biomass burning in interglacials compared to glacials. MA influxes significantly increase when summergreen boreal forest spreads closer to the lake, whereas they decrease when tundra-steppe environments and, especially, Sphagnum peatlands spread. This suggests that low-temperature fires are a typical characteristic of Siberian larch forests also on long timescales. The results also suggest that low-intensity fires would be reduced by vegetation shifts towards very dry environments due to reduced biomass availability, as well as by shifts towards peatlands, which limits fuel dryness. In addition, we observed very low MA ratios, which we interpret as high contributions of galactosan and mannosan from biomass sources other than those currently monitored, such as the moss-lichen mats in the understorey of the summergreen boreal forest. Overall, sedimentary MAs can provide a powerful proxy for fire regime reconstructions and extend our knowledge of long-term natural fire-climate-vegetation feedbacks in the high northern latitudes.
Landscapes in high northern latitudes are assumed to be highly sensitive to future global change, but the rates and long-term trajectories of changes are rather uncertain. In the boreal zone, fires are an important factor in climate-vegetation interactions and biogeochemical cycles. Fire regimes are characterized by small, frequent, low-intensity fires within summergreen boreal forests dominated by larch, whereas evergreen boreal forests dominated by spruce and pine burn large areas less frequently but at higher intensities. Here, we explore the potential of the monosaccharide anhydrides (MA) levoglucosan, mannosan and galactosan to serve as proxies of low-intensity biomass burning in glacial-to-interglacial lake sediments from the high northern latitudes. We use sediments from Lake El'gygytgyn (cores PG 1351 and ICDP 5011-1), located in the far north-east of Russia, and study glacial and interglacial samples of the last 430 kyr (marine isotope stages 5e, 6, 7e, 8, 11c and 12) that had different climate and biome configurations. Combined with pollen and non-pollen palynomorph records from the same samples, we assess how far the modern relationships between fire, climate and vegetation persisted during the past, on orbital to centennial timescales. We find that MAs attached to particulates were well-preserved in up to 430 kyr old sediments with higher influxes from low-intensity biomass burning in interglacials compared to glacials. MA influxes significantly increase when summergreen boreal forest spreads closer to the lake, whereas they decrease when tundra-steppe environments and, especially, Sphagnum peatlands spread. This suggests that low-temperature fires are a typical characteristic of Siberian larch forests also on long timescales. The results also suggest that low-intensity fires would be reduced by vegetation shifts towards very dry environments due to reduced biomass availability, as well as by shifts towards peatlands, which limits fuel dryness. In addition, we observed very low MA ratios, which we interpret as high contributions of galactosan and mannosan from biomass sources other than those currently monitored, such as the moss-lichen mats in the understorey of the summergreen boreal forest. Overall, sedimentary MAs can provide a powerful proxy for fire regime reconstructions and extend our knowledge of long-term natural fire-climate-vegetation feedbacks in the high northern latitudes.
Fjords and old-growth forests store large amounts of organic carbon. Yet the role of episodic disturbances, particularly volcanic eruptions, in mobilizing organic carbon in fjord landscapes covered by temperate rainforests remains poorly quantified. To this end, we estimated how much wood and soils were flushed to nearby fjords following the 2008 eruption of Chaiten volcano in south-central Chile, where pyroclastic sediments covered >12km(2) of pristine temperate rainforest. Field-based surveys of forest biomass, soil organic content, and dead wood transport reveal that the reworking of pyroclastic sediments delivered similar to 66,500+14,600/-14,500tC of large wood to two rivers entering the nearby Patagonian fjords in less than a decade. A similar volume of wood remains in dead tree stands and buried beneath pyroclastic deposits (similar to 79,900+21,100/-16,900tC) or stored in active river channels (5,900-10,600tC). We estimate that bank erosion mobilized similar to 132,300(+21,700)/(-30,600)tC of floodplain forest soil. Eroded and reworked forest soils have been accreting on coastal river deltas at >5mmyr(-1) since the eruption. While much of the large wood is transported out of the fjord by long-shore drift, the finer fraction from eroded forest soils is likely to be buried in the fjords. We conclude that the organic carbon fluxes boosted by rivers adjusting to high pyroclastic sediment loads may remain elevated for up to a decade and that Patagonian temperate rainforests disturbed by excessive loads of pyroclastic debris can be episodic short-lived carbon sources. Plain Language Summary Fjords and old-growth forests are important sinks of organic carbon. However, the role of volcanic eruptions in flushing organic carbon in fjord landscapes remains unexplored. Here we estimated how much forest vegetation and soils were lost to fjords following the 2008 eruption ofunknownChaiten volcano in south-central Chile. Pyroclastic sediments obliterated near-pristine temperateunknownrainforest, and the subsequent reworking of these sediments delivered in less than a decade similar to 66,000 tC of large wood to the mountain rivers, draining into the nearby Patagonian fjords. A similar volume of wood remains in dead tree stands and buried beneath pyroclastic deposits or stored in active riverunknownchannels. We estimate that similar to 130,000 tC of organic carbon-rich soil was lost to erosion, thus adding to the carbon loads. While much of the wood enters the long-shore drift in the fjord heads, the finerunknownfraction from eroded forest soils is likely to be buried in the fjords at rates that exceed regional estimates by an order of magnitude. We anticipate that these eruption-driven fluxes will remain elevated forunknownthe coming years and that Patagonian temperate rainforests episodically switch from carbon sinks to hitherto undocumented carbon sources if disturbed by explosive volcanic eruptions.
OPTIMIZATION OF THE BIOSORPTION OF Cr3+, Cd2+ AND Pb2+ USING A NEW BIOWASTE: Zea mays SEED CHAFF
(2016)
This study highlights the potential use of yellow Zea mays seed chaff (YZMSC) biomass as a biosorbent for the removal of Cr3+, Cd2+ and Pb2+ ions from aqueous solutions. Fourier transformed Infrared analysis of the biomass suggests that YZMSC biomass is basically composed of cellulose and methyl cellulose. The biosorption capacities, q(max), of YZMSC biomass for Cr3+, Cd2+ and Pb2+ are 14.68, 121.95 and 384.62 mg/g respectively. Biosorption equilibrium was achieved at 20, 30 and 60 min for Cr3+, Cd2+ and Pb2+ respectively. YZMSC biomass was found to have higher biosorption capacity and overall kinetic rate of uptake for Pb2+ than for Cd2+ and Cr3+. However, Cr3+ had better initial kinetic rate of uptake by the biomass than Pb2+ and Cd2+. The Freundlich equilibrium isotherm model was found to describe equilibrium data better than Langmuir model suggesting that biosorption of these metal ions could be on more than one active site on the surface of YZMSC biomass. Kinetic study predicted the pseudo-second kinetic model as being able to better describe kinetic data obtained than either modified pseudo-first order or Bangham kinetic models. Biosorption of Cr3+, Cd2+ and Pb2+ onto YZMSC biomass was endothermic in nature with large positive entropy values. Biosorption of these metal ions onto YZMSC biomass was observed to be feasible and spontaneous above 283 K. Optimization of biomass weight for the removal of these metal ions suggest that 384 kg, 129 kg and 144 kg of YZMSC biomass is required for the removal of 95% of Cr3+, Cd2+ and Pb2+ metal ions respectively from 100 mg/L of metal ions in 10 tonnes of aqueous solutions.
Lignin valorization
(2017)
The topic of this project is the use of lignin as alternative source of aromatic building blocks and oligomers to fossil feedstocks. Lignin is known as the most abundant aromatic polymer in nature and is isolated from the lignocellulosic component of plants by different possible extraction treatments. Both the biomass source and the extraction method affect the structure of the isolated lignin, therefore influencing its further application. Lignin was extracted from beech wood by two different hydrothermal alkaline treatments, which use NaOH and Ba(OH)2 as base and by an acid-catalyzed organosolv process. Moreover, lignin was isolated from bamboo, beech wood and coconut by soda treatment of the biomasses. A comparison of the structural features of such isolated lignins was performed through the use of a wide range of analytical methods. Alkaline lignins resulted in a better candidate as carbon precursor and macromonomers for the synthesis of polymer than organosolv lignin. In fact, alkaline lignins showed higher residual mass after carbonization and higher content of the reactive hydroxy functionalities. In contrast, the lignin source turned out to slightly affect the lignin hydroxyl content.
One of the most common lignin modifications is its deconstruction to obtain aromatic molecules, which can be used as starting materials for the synthesis of fine chemicals. Lignin deconstruction leads to a complex mixture of aromatic molecules. A gas chromatographic analytical method was developed to characterize the mixture of products obtained by lignin deconstruction via heterogeneous catalytic hydrogenolysis. The analytical protocol allowed the quantification of three main groups of molecules by means of calibration curves, internal standard and a preliminary silylation step of the sample. The analytical method was used to study the influence of the hydrogenolysis catalyst, temperature and system (flow and batch reactor) on the yield and selectivity of the aromatic compounds.
Lignin extracted from beech wood by a hydrothermal process using Ba(OH)2 as base, was functionalized by aromatic nitration in order to add nitrogen functionalities. The final goal was the synthesis of a nitrogen doped carbon. Nitrated lignin was reduced to the amino form in order to compare the influence of different nitrogen functionalities on the porosity of the final carbon. The carbons were obtained by ionothermal treatment of the precursors in the presence of the eutectic salt mixture KCl/ZnCl2 Such synthesized carbons showed micro-, macro- and mesoporosity and were tested for their electrocatalytic activity towards the oxygen reduction reaction. Mesoporous carbon derived from nitro lignin displayed the highest electrocatalytic activity.
Lignins isolated from coconut, beech wood and bamboo were used as macromonomers for the synthesis of biobased polyesters. A condensation reaction was performed between lignin and a hyper branched poly(ester-amine), previously obtained by condensation of triethanolamine and adipic acid. The influence of the lignin source and content on the thermochemical and mechanical properties of the final material was investigated. The prepolymer showed adhesive properties towards aluminum and its shear strength was therefore measured. The gluing properties of such synthesized glues turned out to be independent from the lignin source but affected by the amount of lignin in the final material.
This work shows that, although still at a laboratory scale, the valorization of lignin can overcome the critical issues of lignin´s structure variability and complexity.
‘Heterosis’ is a term used in genetics and breeding referring to hybrid vigour or the superiority of hybrids over their parents in terms of traits such as size, growth rate, biomass, fertility, yield, nutrient content, disease resistance or tolerance to abiotic and abiotic stress. Parental plants which are two different inbred (pure) lines that have desired traits are crossed to obtain hybrids. Maximum heterosis is observed in the first generation (F1) of crosses. Heterosis has been utilised in plant and animal breeding programs for at least 90 years: by the end of the 21st century, 65% of worldwide maize production was hybrid-based. Generally, it is believed that an understanding of the molecular basis of heterosis will allow the creation of new superior genotypes which could either be used directly as F1 hybrids or form the basis for the future breeding selection programmes. Two selected accessions of a research model plant Arabidopsis thaliana (thale cress) were crossed to obtain hybrids. These typically exhibited a 60-80% increase of biomass when compared to the average weight of both parents. This PhD project focused on investigating the role of selected regulatory genes given their potentially key involvement in heterosis. In the first part of the project, the most appropriate developmental stage for this heterosis study was determined by metabolite level measurements and growth observations in parents and hybrids. At the selected stage, around 60 candidate regulatory genes (i.e. differentially expressed in hybrids when compared to parents) were identified. Of these, the majority were transcription factors, genes that coordinate the expression of other genes. Subsequent expression analyses of the candidate genes in biomass-heterotic hybrids of other Arabidopsis accessions revealed a differential expression in a gene subset, highlighting their relevance for heterosis. Moreover, a fraction of the candidate regulatory genes were found within DNA regions closely linked to the genes that underlie the biomass or growth heterosis. Additional analyses to validate the role of selected candidate regulatory genes in heterosis appeared insufficient to establish their role in heterosis. This uncovered a need for using novel approaches as discussed in the thesis. Taken together, the work provided an insight into studies on the molecular mechanisms underlying heterosis. Although studies on heterosis date back to more than one hundred years, this project as many others revealed that more investigations will be needed to uncover this phenomenon.
Heterosis-associated cellular and molecular processes were analyzed in seeds and seedlings of Arabidopsis thaliana accessions Col-0 and C24 and their heterotic hybrids. Microscopic examination revealed no advantages in terms of hybrid mature embryo organ sizes or cell numbers. Increased cotyledon sizes were detectable 4 days after sowing. Growth heterosis results from elevated cell sizes and numbers, and is well established at 10 days after sowing. The relative growth rates of hybrid seedlings were most enhanced between 3 and 4 days after sowing. Global metabolite profiling and targeted fatty acid analysis revealed maternal inheritance patterns for a large proportion of metabolites in the very early stages. During developmental progression, the distribution shifts to dominant, intermediate and heterotic patterns, with most changes occurring between 4 and 6 days after sowing. The highest incidence of heterotic patterns coincides with establishment of size differences at 4 days after sowing. In contrast, overall transcript patterns at 4, 6 and 10 days after sowing are characterized by intermediate to dominant patterns, with parental transcript levels showing the largest differences. Overall, the results suggest that, during early developmental stages, intermediate gene expression and higher metabolic activity in the hybrids compared to the parents lead to better resource efficiency, and therefore enhanced performance in the hybrids.