Refine
Year of publication
Document Type
- Article (9)
- Doctoral Thesis (9)
- Postprint (3)
- Master's Thesis (1)
Is part of the Bibliography
- yes (22)
Keywords
- DNA (22) (remove)
Ziel der vorliegenden Arbeit war die Entwicklung einer SNP-Genotypisierungsmethode mit auf Mikroarrays immobilisierten PCR-Produkten. Für die Analyse wurde ein faseroptischer Affinitätssensor bzw. ein Durchfluss-Biochip-Scanner mit integrierter Fluoreszenzdetektion verwendet. An den immobilisierten Analyten (PCR-Produkten) wurde eine Fluoreszenzoligonukleotidsonde hybridisiert und anschließend die Dissoziation der Sonde im Fluss verfolgt. Die Diskriminierung von Wildtyp- und Mutanten-DNA erfolgte durch die kinetische Auswertung der Dissoziationskurven sowie durch die Analyse der Fluoreszenzintensität. Die Versuche am faseroptischen Affinitätssensor zeigten, dass DNA-DNA-Hybride sowohl von Oligonukleotiden als auch von PCR-Produkten ein typisches Dissoziationsverhalten aufweisen, wobei fehlgepaarte Hybride eine signifikant schnellere Dissoziation zeigen als perfekt passende Hybride. Dieser Geschwindigkeitsunterschied lässt sich durch den Vergleich der jeweiligen kinetischen Geschwindigkeitskonstanten kD quantitativ erfassen. Da die Kopplung des Analyten an der Chipoberfläche sowie die Hybridisierungs- und Dissoziationsparameter essentiell für die Methodenentwicklung war, wurden die Parameter für ein optimales Spotting und die Immobilisierung von PCR-Produkten ermittelt. Getestet wurden die affine Kopplung von biotinylierten PCR-Produkten an Streptavidin-, Avidin- und NeutrAvidin-Oberflächen sowie die kovalente Bindung von phosphorylierten Amplifikaten mit der EDC/Methylimidazol-Methode. Die besten Ergebnisse sowohl in Spotform und -homogenität als auch im Signal/Rausch-Verhältnis wurden an NeutrAvidin-Oberflächen erreicht. Für die Etablierung der Mikroarray-Genotypisierungsmethode durch kinetische Analyse nach einem Hybridisierungsexperiment wurden Sondenlänge, Puffersystem, Spotting-Konzentration des Analyten sowie Temperatur optimiert. Das Analysensystem erlaubte es, PCR-Produkte mit einer Konzentration von 250 ng/µl in einem HEPES-EDTA-NaCl-Puffer auf mit NeutrAvidin beschichtete Glasträger zu spotten. In den anschließenden Hybridisierungs- und Dissoziationsexperimenten bei 30 °C konnte die Diskriminierung von homocygoter Wildtyp- und homocygoter Mutanten- sowie heterocygoter DNA am Beispiel von Oligonukleotid-Hybriden erreicht werden. In einer Gruppe von 24 homocygoten Patienten wurde ein Polymorphismus im SULT1A1-Gen analysiert. Sowohl durch kinetische Auswertung als auch mit der Analyse der Fluoreszenzintensität wurde der Genotyp der Proben identifiziert. Die Ergebnisse wurden mit dem Referenzverfahren, der Restriktionschnittstellenanalyse (PCR-RFLP) validiert. Lediglich ein Genotyp wurde falsch bestimmt, die Genauigkeit lag bei 96%. In einer Gruppe von 44 Patienten wurde der Genotyp eines SNP in der Adiponectin-Promotor-Region untersucht. Nach Vergleich der Analysenergebnisse mit denen eines Referenzverfahrens konnten lediglich 14 der untersuchten Genotypen bestätigt werden. Ursache für die unzureichende Genauigkeit der Methode war vor allem das schlechte Signal/Rausch-Verhältnis. Zusammenfassend kann gesagt werden, dass das in dieser Arbeit entwickelte Analysesystem für die Genotypisierung von Einzelpunktmutationen geeignet ist, homocygote Patientenproben zuverlässig zu analysieren. Prinzipiell ist das auch bei heterocygoter DNA möglich. Da nach aktuellem Kenntnisstand eine SNP-Analysemethode an immobilisierten PCR-Produkten noch nicht veröffentlicht wurde, stellt das hier entwickelte Verfahren eine Alternative zu bisher bekannten Mikroarray-Verfahren dar. Als besonders vorteilhaft erweist sich der reverse Ansatz der Methode. Der hier vorgestellte Ansatz ist eine kostengünstigere und weniger hoch dimensionierte Lösung für Fragestellungen beispielsweise in der Ernährungswissenschaft, bei denen meist eine mittlere Anzahl Patienten auf nur einige wenige SNPs zu untersuchen ist. Wenn es gelingt, durch die Weiterentwicklung der Hardware bzw. weiterer Optimierung, eine Verbesserung des Signal/Rausch-Verhältnisses und damit die Diskriminierung von heterocygoter DNA zu erreichen, kann diese Methode zukünftig bei der Analyse von mittelgroßen Patientengruppen alternativ zu anderen Genotypisierungsmethoden verwendet werden.
Aufzählen von DNA-Codes
(2006)
In dieser Arbeit wird ein Modell zum Aufzählen von DNA-Codes entwickelt. Indem eine Ordnung auf der Menge aller DNA-Codewörter eingeführt und auf die Menge aller Codes erweitert wird, erlaubt das Modell das Auffinden von DNA-Codes mit bestimmten Eigenschaften, wie Überlappungsfreiheit, Konformität, Kommafreiheit, Stickyfreiheit, Überhangfreiheit, Teilwortkonformität und anderer bezüglich einer gegebenen Involution auf der Menge der Codewörter. Ein auf Grundlage des geschaffenen Modells entstandenes Werkzeug erlaubt das Suchen von Codes mit beliebigen Kombinationen von Codeeigenschaften. Ein weiterer wesentlicher Bestandteil dieser Arbeit ist die Untersuchung der Optimalität von DNA-Codes bezüglich ihrer Informationsrate sowie das Finden solider DNA-Codes.
Taxonomy plays a central role in biological sciences. It provides a communication system for scientists as it aims to enable correct identification of the studied organisms. As a consequence, species descriptions should seek to include as much available information as possible at species level to follow an integrative concept of 'taxonomics'. Here, we describe the cryptic species Epimeria frankei sp. nov. from the North Sea, and also redescribe its sister species, Epimeria cornigera. The morphological information obtained is substantiated by DNA barcodes and complete nuclear 18S rRNA gene sequences. In addition, we provide, for the first time, full mitochondrial genome data as part of a metazoan species description for a holotype, as well as the neotype. This study represents the first successful implementation of the recently proposed concept of taxonomics, using data from high-throughput technologies for integrative taxonomic studies, allowing the highest level of confidence for both biodiversity and ecological research.
Electron transfer (ET) reactions play a crucial role in the metabolic pathways of all organisms. In biotechnological approaches, the redox properties of the protein cytochrome c (cyt c), which acts as an electron shuttle in the respiratory chain, was utilized to engineer ET chains on electrode surfaces. With the help of the biopolymer DNA, the redox protein assembles into electro active multilayer (ML) systems, providing a biocompatible matrix for the entrapment of proteins.
In this study the characteristics of the cyt c and DNA interaction were defined on the molecular level for the first time and the binding sites of DNA on cyt c were identified. Persistent cyt c/DNA complexes were formed in solution under the assembly conditions of ML architectures, i.e. pH 5.0 and low ionic strength. At pH 7.0, no agglomerates were formed, permitting the characterization of the NMR spectroscopy. Using transverse relaxation-optimized spectroscopy (TROSY)-heteronuclear single quantum coherence (HSQC) experiments, DNAs’ binding sites on the protein were identified. In particular, negatively charged AA residues, which are known interaction sites in cyt c/protein binding were identified as the main contact points of cyt c and DNA.
Moreover, the sophisticated task of arranging proteins on electrode surfaces to create functional ET chains was addressed. Therefore, two different enzyme types, the flavin dependent fructose dehydrogenase (FDH) and the pyrroloquinoline quinone dependent glucose dehydrogenase (PQQ-GDH), were tested as reaction partners of freely diffusing cyt c and cyt c immobilized on electrodes in mono- and MLs. The characterisation of the ET processes was performed by means of electrochemistry and the protein deposition was monitored by microgravimetric measurements. FDH and PQQ-GDH were found to be generally suitable for combination with the cyt c/DNA ML system, since both enzymes interact with cyt c in solution and in the immobilized state. The immobilization of FDH and cyt c was achieved with the enzyme on top of a cyt c monolayer electrode without the help of a polyelectrolyte. Combining FDH with the cyt c/DNA ML system did not succeed, yet. However, the basic conditions for this protein-protein interaction were defined. PQQ-GDH was successfully coupled with the ML system, demonstrating that that the cyt c/DNA ML system provides a suitable interface for enzymes and that the creation of signal chains, based on the idea of co-immobilized proteins is feasible.
Future work may be directed to the investigation of cyt c/DNA interaction under the precise conditions of ML assembly. Therefore, solid state NMR or X-ray crystallography may be required. Based on the results of this study, the combination of FDH with the ML system should be addressed. Moreover, alternative types of enzymes may be tested as catalytic component of the ML assembly, aiming on the development of innovative biosensor applications.
Radio-frequency fields in the GHz range are increasingly applied in biotechnology and medicine. In order to fully exploit both their potential and their risks detailed information about the dielectric properties of biological material is needed. For this purpose a measuring system is presented that allows the acquisition of complex dielectric spectra over 4 frequency decade up to 110 GHz. Routines for calibration and for data evaluation according to physicochemical interaction models have been developed. The frequency dependent permittivity and dielectric loss of some proteins and nucleic acids, the main classes of biomolecules, and of their sub-units have been determined. Dielectric spectra are presented for the amino acid alanine, the proteins lysozyme and haemoglobin, the nucleotides AMP and ATP, and for the plasmid pET-21, which has been produced by bacterial culture. Characterisation of a variety of biomolecules is envisaged, as is the application to studies on protein structure and function.
The spatial control of DNA and of self-assembled DNA constructs is a prerequisite for the preparation of DNA-based nanostructures and microstructures and a useful tool for studies on single DNA molecules. Here we describe a protocol for the accumulation of dissolved lambda-DNA molecules between planar microelectrodes by the action of inhomogeneous radiofrequency electric fields. The resulting AC electrokinetic forces stretch the DNA molecules and align them parallel to the electric field. The electrode preparation from off-the-shelf electronic components is explained, and a detailed description of the electronic setup is given. The experimental procedure is controlled in real-time by fluorescence microscopy.
For over a hundred years, the "river sharks" of the genus Glyphis were only known from the type specimens of species that had been collected in the 19th century. They were widely considered extinct until populations of Glyphis-like sharks were rediscovered in remote regions of Borneo and Northern Australia at the end of the 20th century. However, the genetic affinities between the newly discovered Glyphis-like populations and the poorly preserved, original museum-type specimens have never been established. Here, we present the first (to our knowledge) fully resolved, complete phylogeny of Glyphis that includes both archival-type specimens and modern material. We used a sensitive DNA hybridization capture method to obtain complete mitochondrial genomes from all of our samples and show that three of the five described river shark species are probably conspecific and widely distributed in Southeast Asia. Furthermore we show that there has been recent gene flow between locations that are separated by large oceanic expanses. Our data strongly suggest marine dispersal in these species, overturning the widely held notion that river sharks are restricted to freshwater. It seems that species in the genus Glyphis are euryhaline with an ecology similar to the bull shark, in which adult individuals live in the ocean while the young grow up in river habitats with reduced predation pressure. Finally, we discovered a previously unidentified species within the genus Glyphis that is deeply divergent from all other lineages, underscoring the current lack of knowledge about the biodiversity and ecology of these mysterious sharks.
Cationic azobenzene-containing surfactants are capable of condensing DNA in solution with formation of nanosized particles that can be employed in gene delivery. The ratio of surfactant/DNA concentration and solution ionic strength determines the result of DNA-surfactant interaction: Complexes with a micelle-like surfactant associates on DNA, which induces DNA shrinkage, DNA precipitation or DNA condensation with the emergence of nanosized particles. UV and fluorescence spectroscopy, low gradient viscometry and flow birefringence methods were employed to investigate DNA-surfactant and surfactant-surfactant interaction at different NaCl concentrations, [NaCl]. It was observed that [NaCl] (or the Debye screening radius) determines the surfactant-surfactant interaction in solutions without DNA. Monomers, micelles and non-micellar associates of azobenzene-containing surfactants with head-to-tail orientation of molecules were distinguished due to the features of their absorption spectra. The novel data enabled us to conclude that exactly the type of associates (together with the concentration of components) determines the result of DNA-surfactant interaction. Predomination of head-to-tail associates at 0.01 M < [NaCl] < 0.5 M induces DNA aggregation and in some cases DNA precipitation. High NaCl concentration (higher than 0.8 M) prevents electrostatic attraction of surfactants to DNA phosphates for complex formation. DAPI dye luminescence in solutions with DNA-surfactant complexes shows that surfactant tails overlap the DNA minor groove. The addition of di- and trivalent metal ions before and after the surfactant binding to DNA indicate that the bound surfactant molecules are located on DNA in islets
Cationic azobenzene-containing surfactants are capable of condensing DNA in solution with formation of nanosized particles that can be employed in gene delivery. The ratio of surfactant/DNA concentration and solution ionic strength determines the result of DNA-surfactant interaction: Complexes with a micelle-like surfactant associates on DNA, which induces DNA shrinkage, DNA precipitation or DNA condensation with the emergence of nanosized particles. UV and fluorescence spectroscopy, low gradient viscometry and flow birefringence methods were employed to investigate DNA-surfactant and surfactant-surfactant interaction at different NaCl concentrations, [NaCl]. It was observed that [NaCl] (or the Debye screening radius) determines the surfactant-surfactant interaction in solutions without DNA. Monomers, micelles and non-micellar associates of azobenzene-containing surfactants with head-to-tail orientation of molecules were distinguished due to the features of their absorption spectra. The novel data enabled us to conclude that exactly the type of associates (together with the concentration of components) determines the result of DNA-surfactant interaction. Predomination of head-to-tail associates at 0.01 M < [NaCl] < 0.5 M induces DNA aggregation and in some cases DNA precipitation. High NaCl concentration (higher than 0.8 M) prevents electrostatic attraction of surfactants to DNA phosphates for complex formation. DAPI dye luminescence in solutions with DNA-surfactant complexes shows that surfactant tails overlap the DNA minor groove. The addition of di- and trivalent metal ions before and after the surfactant binding to DNA indicate that the bound surfactant molecules are located on DNA in islets.
There is an ongoing interest in O-1(2) sensitizers, whose activity is selectively controlled by their interaction with DNA. To this end, we synthesized three isomeric pyridinium alkynylanthracenes 2 o-p and a water-soluble trapping reagent for O-1(2). In water and in the absence of DNA, these dyes show a poor efficiency to sensitize the photooxygenation of the trapping reagent as they decompose due to electron transfer processes. In contrast, in the presence of DNA O-1(2) is generated from the excited DNA-bound ligand. The interactions of 2 o-p with DNA were investigated by thermal DNA melting studies, UV/vis and fluorescence spectroscopy, and linear and circular dichroism spectroscopy. Our studies revealed an intercalative binding with an orientation of the long pyridyl-alkynyl axis parallel to the main axis of the DNA base pairs. In the presence of poly(dA : dT), all three isomers show an enhanced formation of singlet oxygen, as indicated by the reaction of the latter with the trapping reagent. With green light irradiation of isomer 2 o in poly(dA : dT), the conversion rate of the trapping reagent is enhanced by a factor >10. The formation of O-1(2) was confirmed by control experiments under anaerobic conditions, in deuterated solvents, or by addition of O-1(2) quenchers. When bound to poly(dG : dC), the opposite effect was observed only for isomers 2 o and 2 m, namely the trapping reagent reacted significantly slower. Overall, we showed that pyridinium alkynylanthracenes are very useful intercalators, that exhibit an enhanced photochemical O-1(2) generation in the DNA-bound state.