Filtern
Volltext vorhanden
- nein (55)
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (55)
Gehört zur Bibliographie
- ja (55)
Metal ion induced self-assembly of the rigid ligand 1,4-bis(2,2':6',2 ''-terpyridine- 4'-yl) benzene (1) with Fe(II), Co(II), Ni(II) and Zn(II) acetate in aqueous solution results in extended, rigid- rod like metallosupramolecular coordination polyelectrolytes (MEPE-1). Under the current experimental conditions the molar masses range from 1000 g mol(-1) up to 500 000 g mol(-1). The molar mass depends on concentration, stoichiometry, metal-ion and time. In addition, we present viscosity measurements, small angle neutron scattering and AFM data. We introduce a protocol to precisely control the stoichiometry during self-assembly using conductometry. The protocol can be used with different terpyridine ligands and the above-mentioned metal ions and is of paramount importance to obtain meaningful and reproducible results. As a control experiment we studied the mononuclear 4'- (phenyl)2,2':6',2 ''-terpyridine (3) complex with Ni(II) and Zn(II) and the flexible ligand 1,3- bis[4'-oxa(2,2': 6',2 ''-terpyridinyl)] propane (2) with Ni(II) acetate (Ni-MEPE-2). This ligand does not form extended macroassemblies but likely ring-like structures with 3 to 4 repeat units. Through spin- coating of Ni-MEPE-1 on a solid surface we can image the MEPEs in real space by AFM. SANS measurements of Fe-MEPE-1 verify the extended rigid-rod type structure of the MEPEs in aqueous solution.
Metal-ion-induced self-assembly in aqueous solution of the rigid ligand 1,4-bis(2,2':6',2 ''-terpyridine-4'-yl)benzene (1) with Fe(OAc)(2) and Ni(OAc)(2) is investigated with viscosimetry, SANS, and AFM. Ligand 1 forms extended, rigid-rod like metallo-supramolecular coordination polyeectrolytes (MEPEs) with a molar mass of up to 200 000 g mol(-1) under the Current experimental conditions. The molar mass depends oil concentration, stoichiometry, and time. By spin-coating MEPEs oil a solid surface, we call image the MEPEs in real space by AFM. Both AFM and SANS confirm the extended rigid-rod-type structure of the MEPEs. As a control experiment, we also studied the flexible ligand 1,3-bis[4'-oxa(2,2':6',2 ''-terpyridinyl)]propane (2). Ligand 2 does not form extended macro-assemblies but likely ringlike structures with three 10 four repeat units. Finally, we present it protocol to control the stoichiometry during self-assembly using conductometry, which is of paramount importance to obtain meaningful and reproducible results.
A detailed structural analysis of a Langmuir-Blodgett (LB) multilayer composed of a polyelectrolyte-amphiphile complex (PAC) is presented. The PAC is self-assembled from metal ions, ditopic bis-terpyridines, and amphiphiles. The vertical structure of the LB multilayer is investigated by X-ray reflectometry. The multilayer has a periodicity of 57 A, which corresponds to an architecture of flat lying metallo-supramolecular coordination polyelectrolyte (MEPE) rods and upright-standing amphiphiles (dihexadecyl phosphate, DHP). In-plane diffraction reveals hexagonal packing of the DHP molecules. Using extended X-ray absorption fine structure (EXAFS) experiments, we prove that the central metal ion is coordinated to the terpyridine moieties in a pseudo-octahedral coordination environment. The Fe-N bond distances are 1.82 and 2.0 angstrom, respectively. Temperature resolved measurements indicate a reversible phase transition in a temperature range up to 55 degrees C. EXAFS measurements indicate a lengthening of the average Fe-N bond distance from 1.91 to 1.95 angstrom. The widening of the coordination cage upon heating is expected to lower the ligand field stabilization, thus giving rise to spin transitions in these composite materials
The glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of the glass transition temperature (T-g) as the thickness of an ultrathin polymer film reduces below the radius of gyration but the change in the average T-g was found to be very small. The existence of reversible negative and positive thermal expansion below and above T-g increased the sensitivity of our thickness measurements performed using energy-dispersive x-ray reflectivity. A simple model of the T-g variation as a function of depth expected from sliding motion could explain the results
The molecular orientation of azobenzene side groups in polymer films before (nonpatterned) and after (patterned) development of a surface relief grating has been investigated by photoelectron spectroscopy using synchrotron radiation. The photoemission spectra obtained for 60-100 eV photons of a patterned and a nonpatterned surface are similar when the polarization vector of the synchrotron light is parallel to the grating vector. However, for perpendicular excitation, considerable spectral intensity differences can be observed for 9-14 eV electron binding energy. The observed changes are attributed to the formation of well-oriented azobenzenes at the surface. (C) 2004 American Institute of Physics
Results of energy-dispersive x-ray reflectivity and grazing incidence diffraction studies of Langmuir-Blodgett films exhibited evolution of conventional three-dimensional melting from continuous melting, characteristic of two- dimensional systems, as a function of deposited monolayers. Continuous expansion followed by a sharp phase transition of the in-plane lattice was observed before the melting point and found to be independent of number of deposited layers. Evolution of conventional melting with an increase in the number of monolayers could be quantified by measuring stiffness against tilting of the vertical stack of molecules, which are kept together by an internal field. The internal field as defined in this model reduces as the in-plane lattice expands and the sample temperature approaches melting point. The sharpness of the melting transition, which has been approximated by a Langevin function, increases with the number of deposited monolayers
Formation of a buried density grating on thermal erasure of azobenzene polymer surface gratings
(2002)
Grazing incidence x-ray diffraction (GIXD) measurements of uranyl arachidate (UO2A2) LB films
(1998)
In situ and ex situ SAXS investigation of colloidal sedimentation onto laterally patterned support
(2009)
We report on in situ investigations of colloidal ordering during gravity sedimentation from a colloidal suspension onto a prepatterned support using a polymeric surface relief grating (SRG) as the support. The ordering of colloids with a diameter of 420 nm was investigated by means of grazing-incidence small-angle X-ray scattering (GISAXS) and transmission SAXS using a preparation cell guaranteeing stable temperature and humidity. GISAXS was used for in situ monitoring of the time evolution of colloidal ordering within the whole illuminated sample area. The onset of ordering was indicated by the increase of integrated intensity within a small time frame shortly before complete evaporation of the dispersant. Single domains of coated samples were investigated ex situ by SAXS in transmission geometry where the irradiated sample area was 200 x 200 mu m(2) only. Domains with the typical size of a few millimeters were observed varying in orientation and crystallographic structure for various positions at the sample. They were mainly oriented along the grooves of the grating, confirming the influence of the underlying grating on colloidal ordering.
The molecular in-plane structure of uranyl arachidate Langmuir-Blodgett (LB) films formed at different subphase pH values was analysed by means of X-ray grazing-incidence diffraction. For multilayers formed at low subphase pH a reorganisation of the arachidic acid film structure is confirmed. At appropriate subphase pH values, reorganisation of the film structure, e.g. via the formation of three-dimensional crystallites, is prevented by the presence of the uranyl ions and by the subsequent introduction of conformational disorder (gauche defects) in the alkyl chains. The observation of a macroscopic flow-induced in-plane texture in these uranyl arachidate LB films has profound implications for the design of ordered, supramolecular structures by the Langmuir-Blodgett technique.
The thermal treatment of Y-type Langmuir-Blodgett (LB) films formed from the amphiphilic derivative of 2,5- diphenyl-1,3,4-oxadiazole 1 results in changes of the molecular packing. These changes have been analysed by a combination of X-ray specular reflectivity data, X-ray grazing incidence diffraction data and scanning force microscopy images, On the basis of these experimental data we have simulated possible supramolecular structures, These simulations provide insight into the intermolecular interactions giving rise to the observed structural transitions. The crystalline structure induced by thermal treatment of the LB films is characterized by a uniaxial texture, which is correlated with the dipping direction during deposition of the LB film.
The development of surface relief and density patterns in azobenzene polymer films was studied by diffraction at two different wavelengths. We used x-ray diffraction of synchrotron radiation at 0.124 nm in combination with visible light diffraction at a wavelength of 633 nm. In contrast to visible light scattering x-ray diffraction allows the separation of a surface relief and a density grating contribution due to the different functional dependence of the scattering power. Additionally, the x-ray probe is most sensitive for the onset of the surface grating formation
Polyelectrolyte multilayers (PEMs) with stratification of the internal structure were assembled from statistical amphiphilic copolyelectrolytes of opposite charges. These polyelectrolytes organize in aqueous solutions into micellar structures with fluoroalkyl and aromatic nanodomains, respectively, that were also preserved after deposition as thin films via layer-by-layer (LbL) electrostatic self-assembly. The unimolecular micelles, formed due to statistical compositions of amphiphilic polyelectrolytes used, were shown to suppress chain interdiffusion between adjacent layers in resulting micellar PEMs, as evidenced by spectroscopic ellipsometry, atomic force microscopy (AFM), and neutron reflectometry (NR) measurements. Additionally, hydrophobic cores of the micelles were used as hosts for photoactive molecules, namely, ferrocene and perfluorinated magnesium phthalocyanine. Stratified micellar multilayers were then deposited as hollow capsules using CaCO3 microparticles as templates. Photoinduced electron transfer (PET) between ferrocene and phthalocyanine solubilized in the polymer micelles was demonstrated to occur efficiently inside the stratified, polyelectrolyte walls of the capsules, due to the polarity gradient created by the incompatible aromatic and fluoroalkyl domains. The obtained results present a new approach to construct well-organized, self-assembled nanostructured materials for solar energy conversion.
Metal ion mediated mesomorphism and thin film behaviour of amphitropic tetraazaporphyrin complexes
(2001)
Dielectric loss spectroscopy (DLS) was performed at compact samples and lamellary organized Langmuir-Blodgett (LB) films from various fatty acid salts. Previous thermoanalytical measurements at compact samples revealed the appearance of two different phase transition temperatures; the lower one is related to the acid the second one to the acid salt molecules. In spite of ill defined electrical contacts with the film the characteristic DLS frequencies obtained from about 100nm thick multilayer films are similar to those recorded from bulk samples. No significant variations of frequencies were found changing the counter ions. Besides conductivity influence at low frequncies we found two relaxations related to the mobility of the dipolar carboxylat-metal group at about 100 and 10000Hz. One of these frequencies is related to the rotation around the chain axis. The strength of this relaxation increases significantly with increasing the sample temperature above 105°C. This temperature is connected with a structural phase transition observed by X-ray reflectometry. In case of Pb-stearate the results of the dielectric measurements help to interprete this structural change as a transition from an orthorhombic into a free-rotator phase. The uncorrelated rotation of molecules around their molecular axes initiates a much increased relaxation strength at the carboxylat-metal sites.
The search for alternative routes of organic thin film formation is stimulated by the outstanding properties of these films in such fields as nonlinear optics, photonic data processing and molecular electronics. The formation of highly ordered multilayer structures by thermal vacuum deposition (VD) of organic compounds is an essential step toward the application of supramolecular organic architectures in technical systems. The VD of an amphiphilic substituted 2,5- diphenylene-1,3,4-oxadiazole 1 onto silicon substrates at defined temperature was used for the formation of ultrathin films. The structural data obtained for the VD-films of oxadiazole 1 by means of X-ray reflectivity, X-ray grazing incidence diffraction and atomic force microscopy (AFM) investigations indicate the formation of well ordered oxadiazole multilayers. The structure of the VD-multilayers is compared with that of Langmuir-Blodgett (LB) films and thermally treated LB-multilayers prepared from the same compound.
Atomic force microscopy inspection of the early state of formation of polymer surface relief grating
(2001)
Thin azobenzene polymer films show a very unusual property, namely optically induced material transport. The underlying physics for this phenomenon has not yet been thoroughly explained. Nevertheless, this effect enables one to inscribe different patterns onto film surfaces, including one- and two-dimensional periodic structures. Typical sizes of such structures are of the order of micrometers, i.e. related to the interference pattern made by the laser used for optical excitation. In this study we have measured the mechanical properties of one- and two-dimensional gratings, with a high lateral resolution, using force-distance curves and pulse force mode of the atomic force microscope. We also report on the generation of considerably finer structures, with a typical size of 100 nm, which were inscribed onto the polymer surface by the tip of a scanning near-field optical microscope used as an optical pen. Such inscription not only opens new application possibilities but also gives deeper insight into the fundamentals physics underlying optically induced material transport
Surface relief gratings on azobenzene containing polymer films were prepared under irradiation by actinic light. Finite element modeling of the inscription process was carried out using linear viscoelastic analysis. It was assumed that under illumination the polymer film undergoes considerable plastification, which reduces its original Young's modulus by at least three orders of magnitude. Force densities of about 10(11) N/m(3) were necessary to reproduce the growth of the surface relief grating. It was shown that at large deformations the force of surface tension becomes comparable to the inscription force and therefore plays an essential role in the retardation of the inscription process. In addition to surface profiling the gradual development of an accompanying density grating was predicted for the regime of continuous exposure. Surface grating development under pulselike exposure cannot be explained in the frame of an incompressible fluid model. However, it was easily reproduced using the viscoelastic model with finite compressibility. (C) 2004 American Institute of Physics
Sinusoidally shaped surface relief gratings made of polymer films containing, azobenzene moieties can be created by holographic illumination with laser light of about lambda approximate to 500 nm. The remarkable material transport takes place at temperatures far (100 K) below the glass transition temperature of the material. As probed by visible light scattering the efficiency of grating formation crucially depends on the polarization state of the laser light and is maximal when circular polarization is used. In contrast to VIS light scattering X-ray diffraction is most sensitive for periodic surface undulations with amplitudes below 10 nm. Thus, combined in-situ X-ray and visible light scattering at CHESS were used to investigate the dynamics of surface relief grating formations upon laser illumination. The time development of grating peaks up to 9th order at laser power of P = 20 mW/cm(2) could be investigated, even the onset of grating formation as a function of light polarization. A linear growth of grating amplitude was observed for all polarizations. The growth velocity is maximal using circularly polarized light but very small for s-polarized light
Optically induced mass transport studied by scanning near-field optical- and atomic force microscopy
(2004)
Some functionalised thin organic films show a very unusual property, namely the light induced material transport. This effect enables to generate three-dimensional structures on surfaces of azobenzene containing films only caused by special optical excitation. The physical mechanisms underlying this phenomenon have not yet been fully understood, and in addition, the dimensions of structures created in that way are macroscopic because of the optical techniques and the wavelength of the used light. In order to gain deeper insight into the physical fundamentals of this phenomenon and to open possibilities for applications it is necessary to create and study structures not only in a macroscopic but also in nanometer range. We first report about experiments to generate optically induced nano structures even down to 100 nm size. The optical stimulation was therefore made by a Scanning Near-field Optical Microscope (SNOM). Secondly, physical conditions inside optically generated surface relief gratings were studied by measuring mechanical properties with high lateral resolution via pulse force mode and force distance curves of an AFM