Refine
Has Fulltext
- yes (1)
Year of publication
- 2011 (1)
Document Type
- Doctoral Thesis (1)
Language
- German (1) (remove)
Is part of the Bibliography
- yes (1)
Keywords
- Oberflächengitter (1) (remove)
Institute
Ein neuentwickeltes azobenzenhaltiges Material, das auf einem supramolekularen Konzept basiert, wird bezüglich seiner Strukturbildung während einer holografischen Belichtung bei 488 nm untersucht. Im Mittelpunkt stehen dabei eindimensionale, sinusförmige Reliefs mit Periodizitäten kleiner 500 nm. Es wird gezeigt, wie der Grad der Vernetzung der photosensitiven Schicht die Strukturbildung in diesem Größenbereich beeinflusst. Zur Maximierung der Strukturtiefe werden gezielt Prozessparameter der Belichtung sowie Materialparameter variiert. Unter Standardbedingungen und moderaten Belichtungsintensitäten von ca. 200 mW/cm² bilden sich innerhalb weniger Minuten bei einer Periode von 400 nm Strukturtiefen von bis zu 80nm aus. Durch die Beeinflussung von Materialparametern, wie Oberflächenspannung und Viskosität, wird die maximale Strukturtiefe auf 160nm verdoppelt. Durch Mehrfachbelichtungen wird auch die Bildung von zweidimensionalen Gittern untersucht. Die Originalstrukturen werden in einem Abformverfahren kopiert und in Schichten von unter UV-Licht aushärtenden Polymeren übertragen. Durch das Abformen kommt es zu einer geringfügigen Verschlechterung der Oberflächenqualität sowie Abnahme der Strukturtiefe. Dieser Verlust wird durch eine Verringerung der Prozesstemperatur verringert. Mithilfe kopierter Oberflächengitter werden organische Distributed Feedback-(DFB)-Laser zweiter Ordnung hergestellt, um den Einfluss von Gitterparametern auf die Emissionseigenschaften dieser Laser zu untersuchen. Dazu erfolgt zunächst die Charakterisierung der optischen Verstärkungseigenschaften ausgewählter organischer Emittermaterialien mittels der Variablen Strichlängenmethode. Das mit dem Laserfarbstoff Pyrromthen567 (PM567) dotierte Polystyrol (PS) zeigt dabei trotz konzentrationsbedingter geringer Absorption eine vergleichsweise geringe Gewinnschwelle von 50µJ/cm² bei ca. 575 nm. Das aktive Gast-Wirt-System der konjugierten Polymere MEH-PPV und F8BT* weist eine hohe Absorption und eine kleine Gewinnschwelle von 2,5 µJ/cm² bei 630 nm auf. Dieses Verhalten spiegelt sich auch in den Emissionseigenschaften der damit hergestellten DFB-Laser wieder. Die Dicke der aktiven Schichten liegen im Bereich hunderter Nanometer und wird so eingestellt, dass sich nur die transversalen Grundmoden im Wellenleiter ausbreiten können. Die Gitterperiode sind so gewählt, dass ein Lichtmode im Verstärkungsbereich des Emittermaterials liegt. Die Emissionslinien der Laser sind mit FWHM-Werten von bis zu 0,3 nm spektral sehr schmalbandig und weisen auf eine sehr gute Gitterqualität hin. Die Untersuchungen liefern minimale Laserschwellen und maximale differentielle Effizienzen von 4,0µJ/cm² und 8,4% für MEH-PPV in F8BT* (bei ca. 640nm) sowie 80 µJ/cm² und 0,9% für PM567 in PS (bei ca. 575 nm). Die Vergrößerung der Strukturtiefe von 40nm auf 80nm in mit MEH-PPV dotierten F8BT*-Lasern zu einem deutlichen Anstieg der ausgekoppelten Energie sowie der differentiellen Effizienz und einem geringen Absinken der Laserschwelle. Dies ist ein Resultat der erhöhten Kopplung von Lasermode und Gitter. Die Emission von DFB-Lasern mit zweidimensionalen Oberflächengittern zeigen eine Verringerung der Divergenz aber kein Einfluss auf die Laserschwelle. Abschließend erfolgt eine Vermessung der Photostabilität von DFB-Lasern unter verschiedenen Bedingungen. Das Einbringen eines konjugierten Polymers in eine aktive Matrix sowie der Betrieb in einer Stickstoffatmosphäre führen dabei zu einer Erhöhung der Lebensdauer auf über eine Million Pulse. Durch die Kombination von Oberflächengittern in PDMS-Filmen mit elektroaktiven Substraten wird eine elektrisch steuerbare Deformation des Beugungsgitters erreicht und auf einen DFB-Laser übertragen. Die spannungsinduzierte Verformung wird zunächst in Beugungsexperimenten charakterisiert und ein optimaler Arbeitspunkt bestimmt. Mit den beiden Elastomeren SEBS12 und VHB4910 werden in den Gittern maximale Periodenänderungen von 1,3% bzw. 3,4% bei einer Steuerspannung von 2 kV erreicht. Der Unterschied resultiert aus den verschiedenen Elastizitätsmoduln der Materialien. Übertragen auf DFB-Laser resultiert eine Variation der Gitterperiode senkrecht zu den Gitterlinien in einer kontinuierlichen Verschiebung der Emissionswellenlänge. Mit einem Spannungssignal von 3,25 kV wird die schmalbandige Emission eines elastischen DFB-Lasers kontinuierlich um fast 50nm von 604 nm zu 557 nm hin verschoben. Aus dem Deformationsverhalten sowohl der reinen Beugungsgitter als auch der Laser werden Rückschlüsse auf die Elastizität der verwendeten Materialien gezogen und erlauben Verbesserungen der Bauteile.