Institut für Geoökologie
Refine
Year of publication
Document Type
- Article (348)
- Doctoral Thesis (89)
- Monograph/Edited Volume (48)
- Postprint (13)
- Review (11)
- Master's Thesis (7)
- Conference Proceeding (5)
- Habilitation Thesis (1)
- Other (1)
Keywords
- Modellierung (10)
- climate change (10)
- Klimawandel (7)
- Hochwasser (4)
- Hydrologie (4)
- Landnutzung (4)
- Unsicherheit (4)
- global change (4)
- modelling (4)
- water quality (4)
The sensitivity of fluvial systems to tectonic and climatic boundary conditions allows us to use the geomorphic and stratigraphic records as quantitative archives of past climatic and tectonic conditions. Thus, fluvial terraces that form on alluvial fans and floodplains as well as the rate of sediment export to oceanic and continental basins are commonly used to reconstruct paleoenvironments. However, we currently lack a systematic and quantitative understanding of the transient evolution of fluvial systems and their associated sediment storage and release in response to changes in base level, water input, and sediment input. Such knowledge is necessary to quantify past environmental change from terrace records or sedimentary deposits and to disentangle the multiple possible causes for terrace formation and sediment deposition. Here, we use a set of seven physical experiments to explore terrace formation and sediment export from a single, braided channel that is perturbed by changes in upstream water discharge or sediment supply, or through downstream base-level fall. Each perturbation differently affects (1) the geometry of terraces and channels, (2) the timing of terrace cutting, and (3) the transient response of sediment export from the basin. In general, an increase in water discharge leads to near-instantaneous channel incision across the entire fluvial system and consequent local terrace cutting, thus preserving the initial channel slope on terrace surfaces, and it also produces a transient increase in sediment export from the system. In contrast, a decreased upstream sediment-supply rate may result in longer lag times before terrace cutting, leading to terrace slopes that differ from the initial channel slope, and also lagged responses in sediment export. Finally, downstream base-level fall triggers the upstream propagation of a diffuse knickzone, forming terraces with upstream-decreasing ages. The slope of terraces triggered by base-level fall mimics that of the newly adjusted active channel, whereas slopes of terraces triggered by a decrease in upstream sediment discharge or an increase in upstream water discharge are steeper compared to the new equilibrium channel. By combining fillterrace records with constraints on sediment export, we can distinguish among environmental perturbations that would otherwise remain unresolved when using just one of these records.
The sensitivity of fluvial systems to tectonic and climatic boundary conditions allows us to use the geomorphic and stratigraphic records as quantitative archives of past climatic and tectonic conditions. Thus, fluvial terraces that form on alluvial fans and floodplains as well as the rate of sediment export to oceanic and continental basins are commonly used to reconstruct paleoenvironments. However, we currently lack a systematic and quantitative understanding of the transient evolution of fluvial systems and their associated sediment storage and release in response to changes in base level, water input, and sediment input. Such knowledge is necessary to quantify past environmental change from terrace records or sedimentary deposits and to disentangle the multiple possible causes for terrace formation and sediment deposition. Here, we use a set of seven physical experiments to explore terrace formation and sediment export from a single, braided channel that is perturbed by changes in upstream water discharge or sediment supply, or through downstream base-level fall. Each perturbation differently affects (1) the geometry of terraces and channels, (2) the timing of terrace cutting, and (3) the transient response of sediment export from the basin. In general, an increase in water discharge leads to near-instantaneous channel incision across the entire fluvial system and consequent local terrace cutting, thus preserving the initial channel slope on terrace surfaces, and it also produces a transient increase in sediment export from the system. In contrast, a decreased upstream sediment-supply rate may result in longer lag times before terrace cutting, leading to terrace slopes that differ from the initial channel slope, and also lagged responses in sediment export. Finally, downstream base-level fall triggers the upstream propagation of a diffuse knickzone, forming terraces with upstream-decreasing ages. The slope of terraces triggered by base-level fall mimics that of the newly adjusted active channel, whereas slopes of terraces triggered by a decrease in upstream sediment discharge or an increase in upstream water discharge are steeper compared to the new equilibrium channel. By combining fillterrace records with constraints on sediment export, we can distinguish among environmental perturbations that would otherwise remain unresolved when using just one of these records.
Volcano dome deformation processes analysed with high resolution InSAR and camera-based techniques
(2017)
The sustainability of agro-bioenergy systems is dependent on many factors, some local or regional in implementation, some others global in nature. This study assessed the effects of often ignored local and regional factors (e.g. alternative agronomic factor options, alternative agricultural production systems, alternative biomass flows, alternative conversion technologies etc. The results from this study suggests that key to enhancing the energy efficiency (and by extension the sustainability) of agro-bioenergy systems is paying attention to local and regional factors such as biomass conversion technology, alternative agronomic factor options, alternative agricultural production systems and available biomass flows.
Understanding the distribution of species is fundamental for biodiversity conservation, ecosystem management, and increasingly also for climate impact assessment. The presence of a species in a given site depends on physiological limitations (abiotic factors), interactions with other species (biotic factors), migratory or dispersal processes (site accessibility) as well as the continuing
effects of past events, e.g. disturbances (site legacy). Existing approaches to predict species distributions either (i) correlate observed species occurrences with environmental variables describing abiotic limitations, thus ignoring biotic interactions, dispersal and legacy effects (statistical species distribution model, SDM); or (ii) mechanistically model the variety of processes determining species distributions (process-based model, PBM). SDMs are widely used due to their easy applicability and ability to handle varied data qualities. But they fail to reproduce the dynamic response of species distributions to changing conditions. PBMs are expected to be superior in this respect, but they need very specific data unavailable for many species, and are often more complex and require more computational effort. More recently, hybrid models link the two approaches to combine their respective strengths.
In this thesis, I apply and compare statistical and process-based approaches to predict species distributions, and I discuss their respective limitations, specifically for applications in changing environments. Detailed analyses of SDMs for boreal tree species in Finland reveal that nonclimatic predictors - edaphic properties and biotic interactions - are important limitations at the treeline, contesting the assumption of unrestricted, climatically induced range expansion. While the estimated SDMs are successful within their training data range, spatial and temporal model transfer fails. Mapping and comparing sampled predictor space among data subsets identifies spurious extrapolation as the plausible explanation for limited model transferability. Using these findings, I analyze the limited success of an established PBM (LPJ-GUESS) applied to the same problem. Examination of process representation and parameterization in the PBM identifies implemented processes to adjust (competition between species, disturbance) and missing processes that are crucial in boreal forests (nutrient limitation, forest management). Based on climatic correlations shifting over time, I stress the restricted temporal transferability of bioclimatic limits used in LPJ-GUESS and similar PBMs. By critically assessing the performance of SDM and PBM in this application, I demonstrate the importance of understanding the limitations of the
applied methods.
As a potential solution, I add a novel approach to the repertoire of existing hybrid models. By simulation experiments with an individual-based PBM which reproduces community dynamics resulting from biotic factors, dispersal and legacy effects, I assess the resilience of coastal vegetation to abrupt hydrological changes. According to the results of the resilience analysis, I then modify temporal SDM predictions, thereby transferring relevant process detail from PBM to
SDM. The direction of knowledge transfer from PBM to SDM avoids disadvantages of current hybrid models and increases the applicability of the resulting model in long-term, large-scale applications. A further advantage of the proposed framework is its flexibility, as it is readily extended to other model types, disturbance definitions and response characteristics.
Concluding, I argue that we already have a diverse range of promising modelling tools at hand, which can be refined further. But most importantly, they need to be applied more thoughtfully. Bearing their limitations in mind, combining their strengths and openly reporting underlying assumptions and uncertainties is the way forward.
The functioning of the surface water-groundwater interface as buffer, filter and reactive zone is important for water quality, ecological health and resilience of streams and riparian ecosystems. Solute and heat exchange across this interface is driven by the advection of water. Characterizing the flow conditions in the streambed is challenging as flow patterns are often complex and multidimensional, driven by surface hydraulic gradients and groundwater discharge. This thesis presents the results of an integrated approach of studies, ranging from the acquisition of field data, the development of analytical and numerical approaches to analyse vertical temperature profiles to the detailed, fully-integrated 3D numerical modelling of water and heat flux at the reach scale. All techniques were applied in order to characterize exchange flux between stream and groundwater, hyporheic flow paths and temperature patterns.
The study was conducted at a reach-scale section of the lowland Selke River, characterized by distinctive pool riffle sequences and fluvial islands and gravel bars. Continuous time series of hydraulic heads and temperatures were measured at different depths in the river bank, the hyporheic zone and within the river. The analyses of the measured diurnal temperature variation in riverbed sediments provided detailed information about the exchange flux between river and groundwater. Beyond the one-dimensional vertical water flow in the riverbed sediment, hyporheic and parafluvial flow patterns were identified. Subsurface flow direction and magnitude around fluvial islands and gravel bars at the study site strongly depended on the position around the geomorphological structures and on the river stage. Horizontal water flux in the streambed substantially impacted temperature patterns in the streambed. At locations with substantial horizontal fluxes the penetration depths of daily temperature fluctuations was reduced in comparison to purely vertical exchange conditions.
The calibrated and validated 3D fully-integrated model of reach-scale water and heat fluxes across the river-groundwater interface was able to accurately represent the real system. The magnitude and variations of the simulated temperatures matched the observed ones, with an average mean absolute error of 0.7 °C and an average Nash Sutcliffe Efficiency of 0.87. The simulation results showed that the water and heat exchange at the surface water-groundwater interface is highly variable in space and time with zones of daily temperature oscillations penetrating deep into the sediment and spots of daily constant temperature following the average groundwater temperature. The average hyporheic flow path temperature was found to strongly correlate with the flow path residence time (flow path length) and the temperature gradient between river and groundwater. Despite the complexity of these processes, the simulation results allowed the derivation of a general empirical relationship between the hyporheic residence times and temperature patterns. The presented results improve our understanding of the complex spatial and temporal dynamics of water flux and thermal processes within the shallow streambed. Understanding these links provides a general basis from which to assess hyporheic temperature conditions in river reaches.
The relationship between climate and forest productivity is an intensively studied subject in forest science. This Thesis is embedded within the general framework of future forest growth under climate change and its implications for the ongoing forest conversion. My objective is to investigate the future forest productivity at different spatial scales (from a single specific forest stand to aggregated information across Germany) with focus on oak-pine forests in the federal state of Brandenburg. The overarching question is: how are the oak-pine forests affected by climate change described by a variety of climate scenarios. I answer this question by using a model based analysis of tree growth processes and responses to different climate scenarios with emphasis on drought events. In addition, a method is developed which considers climate change uncertainty of forest management planning.
As a first 'screening' of climate change impacts on forest productivity, I calculated the change in net primary production on the base of a large set of climate scenarios for different tree species and the total area of Germany. Temperature increases up to 3 K lead to positive effects on the net primary production of all selected tree species. But, in water-limited regions this positive net primary production trend is dependent on the length of drought periods which results in a larger uncertainty regarding future forest productivity. One of the regions with the highest uncertainty of net primary production development is the federal state of Brandenburg.
To enhance the understanding and ability of model based analysis of tree growth sensitivity to drought stress two water uptake approaches in pure pine and mixed oak-pine stands are contrasted. The first water uptake approach consists of an empirical function for root water uptake. The second approach is more mechanistic and calculates the differences of soil water potential along a soil-plant-atmosphere continuum. I assumed the total root resistance to vary at low, medium and high total root resistance levels. For validation purposes three data sets on different tree growth relevant time scales are used. Results show that, except the mechanistic water uptake approach with high total root resistance, all transpiration outputs exceeded observed values. On the other hand high transpiration led to a better match of observed soil water content. The strongest correlation between simulated and observed annual tree ring width occurred with the mechanistic water uptake approach and high total root resistance. The findings highlight the importance of severe drought as a main reason for small diameter increment, best supported by the mechanistic water uptake approach with high root resistance. However, if all aspects of the data sets are considered no approach can be judged superior to the other. I conclude that the uncertainty of future productivity of water-limited forest ecosystems under changing environmental conditions is linked to simulated root water uptake.
Finally my study aimed at the impacts of climate change combined with management scenarios on an oak-pine forest to evaluate growth, biomass and the amount of harvested timber. The pine and the oak trees are 104 and 9 years old respectively. Three different management scenarios with different thinning intensities and different climate scenarios are used to simulate the performance of management strategies which explicitly account for the risks associated with achieving three predefined objectives (maximum carbon storage, maximum harvested timber, intermediate). I found out that in most cases there is no general management strategy which fits best to different objectives. The analysis of variance in the growth related model outputs showed an increase of climate uncertainty with increasing climate warming. Interestingly, the increase of climate-induced uncertainty is much higher from 2 to 3 K than from 0 to 2 K.
Fluxes of organic and inorganic carbon within the Amazon basin are considerably controlled by annual flooding, which triggers the export of terrigenous organic material to the river and ultimately to the Atlantic Ocean. The amount of carbon imported to the river and the further conversion, transport and export of it depend on temperature, atmospheric CO2, terrestrial productivity and carbon storage, as well as discharge. Both terrestrial productivity and discharge are influenced by climate and land use change. The coupled LPJmL and RivCM model system (Langerwisch et al., 2016) has been applied to assess the combined impacts of climate and land use change on the Amazon riverine carbon dynamics. Vegetation dynamics (in LPJmL) as well as export and conversion of terrigenous carbon to and within the river (RivCM) are included. The model system has been applied for the years 1901 to 2099 under two deforestation scenarios and with climate forcing of three SRES emission scenarios, each for five climate models. We find that high deforestation (business-as-usual scenario) will strongly decrease (locally by up to 90 %) riverine particulate and dissolved organic carbon amount until the end of the current century. At the same time, increase in discharge leaves net carbon transport during the first decades of the century roughly unchanged only if a sufficient area is still forested. After 2050 the amount of transported carbon will decrease drastically. In contrast to that, increased temperature and atmospheric CO2 concentration determine the amount of riverine inorganic carbon stored in the Amazon basin. Higher atmospheric CO2 concentrations increase riverine inorganic carbon amount by up to 20% (SRES A2). The changes in riverine carbon fluxes have direct effects on carbon export, either to the atmosphere via outgassing or to the Atlantic Ocean via discharge. The outgassed carbon will increase slightly in the Amazon basin, but can be regionally reduced by up to 60% due to deforestation. The discharge of organic carbon to the ocean will be reduced by about 40% under the most severe deforestation and climate change scenario. These changes would have local and regional consequences on the carbon balance and habitat characteristics in the Amazon basin itself as well as in the adjacent Atlantic Ocean.
Peak oil is forcing our society to shift from fossil to renewable resources. However, such renewable resources are also scarce, and they too must be used in the most efficient and sustainable way possible. Biorefining is a concept that represents both resource efficiency and sustainability. This approach initiates a cascade use, which means food and feed production before material use, and an energy-related use at the end of the value-added chain. However, sustainability should already start in the fields, on the agricultural side, where the industrially-used biomass is produced. Therefore, the aim of my doctoral thesis is to analyse the sustainable feedstock supply for biorefineries. In contrast to most studies on biorefineries, I focus on the sustainable provision of feedstock and not on the bioengineering processing of whatever feedstock is available.
Grasslands provide a high biomass potential. They are often inefficiently used, so a new utilisation concept based on the biorefining approach can increase the added value from grasslands. Fodder legumes from temporary and permanent grasslands were chosen for this study. Previous research shows that they are a promising feedstock for industrial uses, and their positive environmental impact is an important byproduct to promote sustainable agricultural production systems.
Green Biorefineries are a class of biorefineries that use fresh green biomass, such as grasses or fodder legumes, as feedstock. After fractionation, an organic solution (press juice) forms; this is used for the production of organic acids, chemicals and extracts, as well as fertilisers. A fibre component (press cake) is also created to produce feed, biomaterials and biogas. This thesis examines a specific value chain, using alfalfa and clover/grass as feedstock and generating lactic acid and one type of cattle feed from it. The research question is if biomass production needs to be adapted for the utilisation of fodder legumes in the Green Biorefinery approach. I have attempted to give a holistic analysis of cultivation, processing and utilisation of two specific grassland crops. Field trials with alfalfa and clover/grass at different study sites were carried out to obtain information on biomass quality and quantity depending on the crop, study site and harvest time. The fresh biomass was fractionated with a screw press and the composition of press juices and cakes was analysed. Fermentation experiments took place to determine the usability of press juices for lactic acid production. The harvest time is not of high importance for the quality of press juices as a fermentation medium. For permanent grasslands, late cuts, often needed for reasons of nature conservation, are possible without a major influence on feedstock quality. The press cakes were silaged for feed-value determination.
Following evidence that both intermediate products are suitable feedstocks in the Green Biorefinery approach, I developed a cost-benefit analysis, comparing different production scenarios on a farm. Two standard crop rotations for Brandenburg, producing either only market crops or market crops and fodder legumes for ruminant feed production, were compared to a system that uses the cultivated fodder legumes for the Green Biorefinery value chain instead of only feed production. Timely processing of the raw material is important to maintain quality for industrial uses, so on-site processing at the farm is assumed in Green Biorefinery scenario. As a result, more added value stays in the rural area. Two farm sizes, common for many European regions, were chosen to examine the influence of scale. The cost site of farmers has also been analysed in detail to assess which farm characteristics make production of press juices for biochemical industries viable. Results show that for large farm sizes in particular, the potential profits are high. Additionally, the wider spectrum of marketable products generates new sources of income for farmers.
The holistic analysis of the supply chain provides evidence that the cultivation processes for fodder legumes do not need to be adapted for use in Green Biorefineries. In fact, the new utilisation approach even widens the cultivation and processing spectrum and can increase economic viability of fodder legume production in conventional farming.
The sea level rise induced intensification of coastal floods is a serious threat to many regions in proximity to the ocean. Although severe flood events are rare they can entail enormous damage costs, especially when built-up areas are inundated. Fortunately, the mean sea level advances slowly and there is enough time for society to adapt to the changing environment. Most commonly, this is achieved by the construction or reinforcement of flood defence measures such as dykes or sea walls but also land use and disaster management are widely discussed options. Overall, albeit the projection of sea level rise impacts and the elaboration of adequate response strategies is amongst the most prominent topics in climate impact research, global damage estimates are vague and mostly rely on the same assessment models. The thesis at hand contributes to this issue by presenting a distinctive approach which facilitates large scale assessments as well as the comparability of results across regions. Moreover, we aim to improve the general understanding of the interplay between mean sea level rise, adaptation, and coastal flood damage.
Our undertaking is based on two basic building blocks. Firstly, we make use of macroscopic flood-damage functions, i.e. damage functions that provide the total monetary damage within a delineated region (e.g. a city) caused by a flood of certain magnitude. After introducing a systematic methodology for the automatised derivation of such functions, we apply it to a total of 140 European cities and obtain a large set of damage curves utilisable for individual as well as comparative damage assessments. By scrutinising the resulting curves, we are further able to characterise the slope of the damage functions by means of a functional model. The proposed function has in general a sigmoidal shape but exhibits a power law increase for the relevant range of flood levels and we detect an average exponent of 3.4 for the considered cities. This finding represents an essential input for subsequent elaborations on the general interrelations of involved quantities.
The second basic element of this work is extreme value theory which is employed to characterise the occurrence of flood events and in conjunction with a damage function provides the probability distribution of the annual damage in the area under study. The resulting approach is highly flexible as it assumes non-stationarity in all relevant parameters and can be easily applied to arbitrary regions, sea level, and adaptation scenarios. For instance, we find a doubling of expected flood damage in the city of Copenhagen for a rise in mean sea levels of only 11 cm. By following more general considerations, we succeed in deducing surprisingly simple functional expressions to describe the damage behaviour in a given region for varying mean sea levels, changing storm intensities, and supposed protection levels. We are thus able to project future flood damage by means of a reduced set of parameters, namely the aforementioned damage function exponent and the extreme value parameters. Similar examinations are carried out to quantify the aleatory uncertainty involved in these projections. In this regard, a decrease of (relative) uncertainty with rising mean sea levels is detected. Beyond that, we demonstrate how potential adaptation measures can be assessed in terms of a Cost-Benefit Analysis. This is exemplified by the Danish case study of Kalundborg, where amortisation times for a planned investment are estimated for several sea level scenarios and discount rates.
Anthropogenic activities have transformed the Earth's environment, not only on local level, but on the planetary-scale causing global change. Besides industrialization, agriculture is a major driver of global change. This change in turn impairs the agriculture sector, reducing crop yields namely due to soil degradation, water scarcity, and climate change. However, this is a more complex issue than it appears. Crop yields can be increased by use of agrochemicals and fertilizers which are mainly produced by fossil energy. This is important to meet the increasing food demand driven by global demographic change, which is further accelerated by changes in regional lifestyles. In this dissertation, we attempt to address this complex problem exploring agricultural potential globally but on a local scale. For this, we considered the influence of lifestyle changes (dietary patterns) as well as technological progress and their effects on climate change, mainly greenhouse gas (GHG) emissions. Furthermore, we examined options for optimizing crop yields in the current cultivated land with the current cropping patterns by closing yield gaps. Using this, we investigated in a five-minute resolution the extent to which food demand can be met locally, and/or by regional and/or global trade. Globally, food consumption habits are shifting towards calorie rich diets. Due to dietary shifts combined with population growth, the global food demand is expected to increase by 60-110% between 2005 and 2050. Hence, one of the challenges to global sustainability is to meet the growing food demand, while at the same time, reducing agricultural inputs and environmental consequences. In order to address the above problem, we used several freely available datasets and applied multiple interconnected analytical approaches that include artificial neural network, scenario analysis, data aggregation and harmonization, downscaling algorithm, and cross-scale analysis.
Globally, we identified sixteen dietary patterns between 1961 and 2007 with food intakes ranging from 1,870 to 3,400 kcal/cap/day. These dietary patterns also reflected changing dietary habits to meat rich diets worldwide. Due to the large share of animal products, very high calorie diets that are common in the developed world, exhibit high total per capita emissions of 3.7-6.1 kg CO2eq./day. This is higher than total per capita emissions of 1.4-4.5 kg CO2eq./day associated with low and moderate calorie diets that are common in developing countries. Currently, 40% of the global crop calories are fed to livestock and the feed calorie use is four times the produced animal calories. However, these values vary from less than 1 kcal to greater 10 kcal around the world. On the local and national scale, we found that the local and national food production could meet demand of 1.9 and 4.4 billion people in 2000, respectively. However, 1 billion people from Asia and Africa require intercontinental agricultural trade to meet their food demand. Nevertheless, these regions can become food self-sufficient by closing yield gaps that require location specific inputs and agricultural management strategies. Such strategies include: fertilizers, pesticides, soil and land improvement, management targeted on mitigating climate induced yield variability, and improving market accessibility. However, closing yield gaps in particular requires global N-fertilizer application to increase by 45-73%, P2O5 by 22-46%, and K2O by 2-3 times compare to 2010. Considering population growth, we found that the global agricultural GHG emissions will approach 7 Gt CO2eq./yr by 2050, while the global livestock feed demand will remain similar to 2000. This changes tremendously when diet shifts are also taken into account, resulting in GHG emissions of 20 Gt CO2eq./yr and an increase of 1.3 times in the crop-based feed demand between 2000 and 2050. However, when population growth, diet shifts, and technological progress by 2050 were considered, GHG emissions can be reduced to 14 Gt CO2eq./yr and the feed demand to nearly 1.8 times compare to that in 2000. Additionally, our findings shows that based on the progress made in closing yield gaps, the number of people depending on international trade can vary between 1.5 and 6 billion by 2050. In medium term, this requires additional fossil energy. Furthermore, climate change, affecting crop yields, will increase the need for international agricultural trade by 4% to 16%.
In summary, three general conclusions are drawn from this dissertation. First, changing dietary patterns will significantly increase crop demand, agricultural GHG emissions, and international food trade in the future when compared to population growth only. Second, such increments can be reduced by technology transfer and technological progress that will enhance crop yields, decrease agricultural emission intensities, and increase livestock feed conversion efficiencies. Moreover, international trade dependency can be lowered by consuming local and regional food products, by producing diverse types of food, and by closing yield gaps. Third, location specific inputs and management options are required to close yield gaps. Sustainability of such inputs and management largely depends on which options are chosen and how they are implemented. However, while every cultivated land may not need to attain its potential yields to enable food security, closing yield gaps only may not be enough to achieve food self-sufficiency in some regions. Hence, a combination of sustainable implementations of agricultural intensification, expansion, and trade as well as shifting dietary habits towards a lower share of animal products is required to feed the growing population.
Water resources from Central Asia’s mountain regions have a high relevance for the water supply of the water scarce lowlands. A good understanding of the water cycle in these mountain regions is therefore needed to develop water management strategies. Hydrological modeling helps to improve our knowledge of the regional water cycle, and it can be used to gain a better understanding of past changes or estimate future hydrologic changes in view of projected changes in climate. However, due to the scarcity of hydrometeorological data, hydrological modeling for mountain regions in Central Asia involves large uncertainties.
Addressing this problem, the first aim of this thesis was to develop hydrological modeling approaches that can increase the credibility of hydrological models in data sparse mountain regions. This was achieved by using additional data from remote sensing and atmospheric modeling. It was investigated whether spatial patterns from downscaled reanalysis data can be used for the interpolation of station-based precipitation data. This approach was compared to other precipitation estimates using a hydrologic evaluation based on hydrological modeling and a comparison of simulated and observed discharge, which demonstrated a generally good performance of this method. The study further investigated the value of satellite-derived snow cover data for model calibration. Trade-offs of good model performance in terms of discharge and snow cover were explicitly evaluated using a multiobjective optimization algorithm, and the results were contrasted with single-objective calibration and Monte Carlo simulations. The study clearly shows that the additional use of snow cover data improved the internal consistency of the hydrological model. In this context, it was further investigated for the first time how many snow cover scenes were required for hydrological model calibration.
The second aim of this thesis was the application of the hydrological model in order to investigate the causes of observed streamflow increases in two headwater catchments of the Tarim River over the recent decades. This simulation-based approach for trend attribution was complemented by a data-based approach. The hydrological model was calibrated to discharge and glacier mass balance data and considered changes in glacier geometry over time. The results show that in the catchment with a lower glacierization, increasing precipitation and temperature both contributed to the streamflow increases, while in the catchment with a stronger glacierization, increasing temperatures were identified as the dominant driver.
One challenging question in ecology is to explain species coexistence in highly diverse temperate grassland plant communities. Within this context, a clear understanding of the consequences of belowground herbivory for the composition and the diversity of plant communities continue to elude ecologists. The existing body of empirical evidence reveals partly contradictory responses ranging from negative to neutral or positive effects of belowground herbivory on grassland diversity.
To reveal possible mechanistic grounds for these discrepancies, we extended an existing simulation model of grassland communities based on plant functional types to include root herbivory. This enabled us to test the effects of different feeding modes that represent different herbivore guilds. For each belowground feeding mode, we systematically varied the intensity and frequency of herbivory events for three different levels of soil fertility both in the presence and absence of additional aboveground grazing.
Our modelling approach successfully reproduced various empirically reported diversity responses, merely on the basis of the different feeding modes. Different levels of plant resource availability affected the strength, but not the direction of the belowground herbivory effects. The only exception was the scenario with low resource levels, which promoted neutral (neither positive nor negative) diversity responses for some of the feeding modes. Interestingly, aboveground biomass production was largely unaffected by diversity changes induced by belowground herbivory except in the case of selective feeding modes that were related to specific functional traits.
Our findings provide possible explanations for the broad spectrum of belowground herbivory effects on plant community diversity. Furthermore, the presented theoretical modelling approach provides a suitable conceptual framework to better understand the complex linkage between plant community and belowground herbivory dynamics.
One of the major challenges related with the current practice in seismic hazard studies is the adjustment of empirical ground motion prediction equations (GMPEs) to different seismological environments. We believe that the key to accommodating differences in regional seismological attributes of a ground motion model lies in the Fourier spectrum. In the present study, we attempt to explore a new approach for the development of response spectral GMPEs, which is fully consistent with linear system theory when it comes to adjustment issues. This approach consists of developing empirical prediction equations for Fourier spectra and for a particular duration estimate of ground motion which is tuned to optimize the fit between response spectra obtained through the random vibration theory framework and the classical way. The presented analysis for the development of GMPEs is performed on the recently compiled reference database for seismic ground motion in Europe (RESORCE-2012). Although, the main motivation for the presented approach is the adjustability and the use of the corresponding model to generate data driven host-to-target conversions, even as a standalone response spectral model it compares reasonably well with the GMPEs of Ambraseys et al. (Bull Earthq Eng 3:1-53, 2005), Akkar and Bommer (Seismol Res Lett 81(2):195-206, 2010) and Akkar and Cagnan (Bull Seismol Soc Am 100(6):2978-2995, 2010).