530 Physik
Refine
Has Fulltext
- yes (24) (remove)
Year of publication
- 2017 (24) (remove)
Document Type
- Postprint (13)
- Doctoral Thesis (10)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (24)
Keywords
Molecules often fragment after photoionization in the gas phase. Usually, this process can only be investigated spectroscopically as long as there exists electron correlation between the photofragments. Important parameters, like their kinetic energy after separation, cannot be investigated. We are reporting on a femtosecond time-resolved Auger electron spectroscopy study concerning the photofragmentation dynamics of thymine. We observe the appearance of clearly distinguishable signatures from thymine′s neutral photofragment isocyanic acid. Furthermore, we observe a time-dependent shift of its spectrum, which we can attribute to the influence of the charged fragment on the Auger electron. This allows us to map our time-dependent dataset onto the fragmentation coordinate. The time dependence of the shift supports efficient transformation of the excess energy gained from photoionization into kinetic energy of the fragments. Our method is broadly applicable to the investigation of photofragmentation processes.
Approaching physical limits in speed and size of today's magnetic storage and processing technologies demands new concepts for controlling magnetization and moves researches on optically induced magnetic dynamics. Studies on photoinduced magnetization dynamics and their underlying mechanisms have been primarily performed on ferromagnetic metals. Ferromagnetic dynamics bases on transfer of the conserved angular momentum connected with atomic magnetic moments out of the parallel aligned magnetic system into other degrees of freedom.
In this thesis the so far rarely studied response of antiferromagnetic order to ultra-short optical laser pulses in a metal is investigated. The experiments were performed at the FemtoSpex slicing facility at the storage ring BESSY II, an unique source for ultra-short elliptically polarized x-ray pulses. Laser-induced changes of the 4f-magnetic order parameter in ferro- and antiferromagnetic dysprosium (Dy), were studied by x-ray methods, which yield directly comparable quantities. The discovered fundamental differences in the temporal and spatial behavior of ferro- and antiferrmagnetic dynamics are assinged to an additional channel for angular momentum transfer, which reduces the antiferromagnetic order by redistributing angular momentum within the non-parallel aligned magnetic system, and hence conserves the zero net magnetization. It is shown that antiferromagnetic dynamics proceeds considerably faster and more energy-efficient than demagnetization in ferromagnets. By probing antiferromagnetic order in time and space, it is found to be affected along the whole sample depth of an in situ grown 73 nm tick Dy film. Interatomic transfer of angular momentum via fast diffusion of laser-excited 5d electrons is held responsible for the out-most long-ranging effect. Ultrafast ferromagnetic dynamics can be expected to base on the same origin, which however leads to demagnetization only in regions close to interfaces caused by super-diffusive spin transport. Dynamics due to local scattering processes of excited but less mobile electrons, occur in both magnetic alignments only in directly excited regions of the sample and on slower pisosecond timescales. The thesis provides fundamental insights into photoinduced magnetic dynamics by directly comparing ferro- and antiferromagnetic dynamics in the same material and by consideration of the laser-induced magnetic depth profile.
Via their powerful radiation, stellar winds, and supernova explosions, massive stars (Mini & 8 M☉) bear a tremendous impact on galactic evolution. It became clear in recent decades that the majority of massive stars reside in binary systems. This thesis sets as a goal to quantify the impact of binarity (i.e., the presence of a companion star) on massive stars. For this purpose, massive binary systems in the Local Group, including OB-type binaries, high mass X-ray binaries (HMXBs), and Wolf-Rayet (WR) binaries, were investigated by means of spectral, orbital, and evolutionary analyses.
The spectral analyses were performed with the non-local thermodynamic equillibrium (non-LTE) Potsdam Wolf-Rayet (PoWR) model atmosphere code. Thanks to critical updates in the calculation of the hydrostatic layers, the code became a state-of-the-art tool applicable for all types of hot massive stars (Chapter 2). The eclipsing OB-type triple system δ Ori served as an intriguing test-case for the new version of the PoWR code, and provided key insights regarding the formation of X-rays in massive stars (Chapter 3). We further analyzed two prototypical HMXBs, Vela X-1 and IGR J17544-2619, and obtained fundamental conclusions regarding the dichotomy of two basic classes of HMXBs (Chapter 4). We performed an exhaustive analysis of the binary R 145 in the Large Magellanic Cloud (LMC), which was claimed to host the most massive stars known. We were able to disentangle the spectrum of the system, and performed an orbital, polarimetric, and spectral analysis, as well as an analysis of the wind-wind collision region. The true masses of the binary components turned out to be significantly lower than suggested, impacting our understanding of the initial mass function and stellar evolution at low metallicity (Chapter 5). Finally, all known WR binaries in the Small Magellanic Cloud (SMC) were analyzed. Although it was theoretical predicted that virtually all WR stars in the SMC should be formed via mass-transfer in binaries, we find that binarity was not important for the formation of the known WR stars in the SMC, implying a strong discrepancy between theory and observations (Chapter 6).
In Germany more than 200.000 persons die of cancer every year, which makes it the second most common cause of death. Chemotherapy and radiation therapy are often combined to exploit a supra-additive effect, as some chemotherapeutic agents like halogenated nucleobases sensitize the cancerous tissue to radiation. The radiosensitizing action of certain therapeutic agents can be at least partly assigned to their interaction with secondary low energy electrons (LEEs) that are generated along the track of the ionizing radiation. In the therapy of cancer DNA is an important target, as severe DNA damage like double strand breaks induce the cell death. As there is only a limited number of radiosensitizing agents in clinical practice, which are often strongly cytotoxic, it would be beneficial to get a deeper understanding of the interaction of less toxic potential radiosensitizers with secondary reactive species like LEEs. Beyond that LEEs can be generated by laser illuminated nanoparticles that are applied in photothermal therapy (PTT) of cancer, which is an attempt to treat cancer by an increase of temperature in the cells. However, the application of halogenated nucleobases in PTT has not been taken into account so far. In this thesis the interaction of the potential radiosensitizer 8-bromoadenine (8BrA) with LEEs was studied. In a first step the dissociative electron attachment (DEA) in the gas phase was studied in a crossed electron-molecular beam setup. The main fragmentation pathway was revealed as the cleavage of the C-Br bond. The formation of a stable parent anion was observed for electron energies around 0 eV. Furthermore, DNA origami nanostructures were used as platformed to determine electron induced strand break cross sections of 8BrA sensitized oligonucleotides and the corresponding nonsensitized sequence as a function of the electron energy. In this way the influence of the DEA resonances observed for the free molecules on the DNA strand breaks was examined. As the surrounding medium influences the DEA, pulsed laser illuminated gold nanoparticles (AuNPs) were used as a nanoscale electron source in an aqueous environment. The dissociation of brominated and native nucleobases was tracked with UV-Vis absorption spectroscopy and the generated fragments were identified with surface enhanced Raman scattering (SERS). Beside the electron induced damage, nucleobase analogues are decomposed in the vicinity of the laser illuminatednanoparticles due to the high temperatures. In order to get a deeper understanding of the different dissociation mechanisms, the thermal decomposition of the nucleobases in these systems was studied and the influence of the adsorption kinetics of the molecules was elucidated. In addition to the pulsed laser experiments, a dissociative electron transfer from plasmonically generated ”hot electrons” to 8BrA was observed under low energy continuous wave laser illumination and tracked with SERS. The reaction was studied on AgNPs and AuNPs as a function of the laser intensity and wavelength. On dried samples the dissociation of the molecule was described by fractal like kinetics. In solution, the dissociative electron transfer was observed as well. It turned out that the timescale of the reaction rates were slightly below typical integration times of Raman spectra. In consequence such reactions need to be taken into account in the interpretation of SERS spectra of electrophilic molecules. The findings in this thesis help to understand the interaction of brominated nucleobases with plasmonically generated electrons and free electrons. This might help to evaluate the potential radiosensitizing action of such molecules in cancer radiation therapy and PTT.
Anomalous diffusion is being discovered in a fast growing number of systems. The exact nature of this anomalous diffusion provides important information on the physical laws governing the studied system. One of the central properties analysed for finite particle motion time series is the intrinsic variability of the apparent diffusivity, typically quantified by the ergodicity breaking parameter EB. Here we demonstrate that frequently EB is insufficient to provide a meaningful measure for the observed variability of the data. Instead, important additional information is provided by the higher order moments entering by the skewness and kurtosis. We analyse these quantities for three popular anomalous diffusion models. In particular, we find that even for the Gaussian fractional Brownian motion a significant skewness in the results of physical measurements occurs and needs to be taken into account. Interestingly, the kurtosis and skewness may also provide sensitive estimates of the anomalous diffusion exponent underlying the data. We also derive a new result for the EB parameter of fractional Brownian motion valid for the whole range of the anomalous diffusion parameter. Our results are important for the analysis of anomalous diffusion but also provide new insights into the theory of anomalous stochastic processes.
We report on light sensitive microgel particles that can change their volume reversibly in response to illumination with light of different wavelengths. To make the anionic microgels photosensitive we add surfactants with a positively charged polyamine head group and an azobenzene containing tail. Upon illumination, azobenzene undergoes a reversible photo-isomerization reaction from a trans- to a cis-state accompanied by a change in the hydrophobicity of the surfactant. Depending on the isomerization state, the surfactant molecules are either accommodated within the microgel (trans-state) resulting in its shrinkage or desorbed back into water (cis-isomer) letting the microgel swell. We have studied three surfactants differing in the number of amino groups, so that the number of charges of the surfactant head varies between 1 and 3. We have found experimentally and theoretically that the surfactant concentration needed for microgel compaction increases with decreasing number of charges of the head group. Utilization of polyamine azobenzene containing surfactants for the light triggered remote control of the microgel size opens up a possibility for applications of light responsive microgels as drug carriers in biology and medicine.
Tremendous progress in the development of thin film solar cell techniques has been made over the last decade. The field of organic solar cells is constantly developing, new material classes like Perowskite solar cells are emerging and different types of hybrid organic/inorganic material combinations are being investigated for their physical properties and their applicability in thin film electronics. Besides typical single-junction architectures for solar cells, multi-junction concepts are also being investigated as they enable the overcoming of theoretical limitations of a single-junction. In multi-junction devices each sub-cell operates in different wavelength regimes and should exhibit optimized band-gap energies. It is exactly this tunability of the band-gap energy that renders organic solar cell materials interesting candidates for multi-junction applications. Nevertheless, only few attempts have been made to combine inorganic and organic solar cells in series connected multi-junction architectures. Even though a great diversity of organic solar cells exists nowadays, their open circuit voltage is usually low compared to the band-gap of the active layer. Hence, organic low band-gap solar cells in particular show low open circuit voltages and the key factors that determine the voltage losses are not yet fully understood. Besides open circuit voltage losses the recombination of charges in organic solar cells is also a prevailing research topic, especially with respect to the influence of trap states.
The exploratory focus of this work is therefore set, on the one hand, on the development of hybrid organic/inorganic multi-junctions and, on the other hand, on gaining a deeper understanding of the open circuit voltage and the recombination processes of organic solar cells.
In the first part of this thesis, the development of a hybrid organic/inorganic triple-junction will be discussed which showed at that time (Jan. 2015) a record power conversion efficiency of 11.7%. The inorganic sub-cells of these devices consist of hydrogenated amorphous silicon and were delivered by the Competence Center Thin-Film and Nanotechnology for Photovoltaics in Berlin. Different recombination contacts and organic sub-cells were tested in conjunction with these inorganic sub-cells on the basis of optical modeling predictions for the optimal layer thicknesses to finally reach record efficiencies for this type of solar cells.
In the second part, organic model systems will be investigated to gain a better understanding of the fundamental loss mechanisms that limit the open circuit voltage of organic solar cells. First, bilayer systems with different orientation of the donor and acceptor molecules were investigated to study the influence of the donor/acceptor orientation on non-radiative voltage loss. Secondly, three different bulk heterojunction solar cells all comprising the same amount of fluorination and the same polymer backbone in the donor component were examined to study the influence of long range electrostatics on the open circuit voltage. Thirdly, the device performance of two bulk heterojunction solar cells was compared which consisted of the same donor polymer but used different fullerene acceptor molecules. By this means, the influence of changing the energetics of the acceptor component on the open circuit voltage was investigated and a full analysis of the charge carrier dynamics was presented to unravel the reasons for the worse performance of the solar cell with the higher open circuit voltage. In the third part, a new recombination model for organic solar cells will be introduced and its applicability shown for a typical low band-gap cell. This model sheds new light on the recombination process in organic solar cells in a broader context as it re-evaluates the recombination pathway of charge carriers in devices which show the presence of trap states. Thereby it addresses a current research topic and helps to resolve alleged discrepancies which can arise from the interpretation of data derived by different measurement techniques.
Ferroelectrets are internally charged polymer foams or cavity-containing polymer-_lm systems that combine large piezoelectricity with mechanical flexibility and elastic compliance. The term “ferroelectret” was coined based on the fact that it is a space-charge electret that also shows ferroic behavior. In this thesis, comprehensive work on ferroelectrets, and in particular on their preparation, their charging, their piezoelectricity and their applications is reported.
For industrial applications, ferroelectrets with well-controlled distributions or even uniform values of cavity size and cavity shape and with good thermal stability of the piezoelectricity are very desirable. Several types of such ferroelectrets are developed using techniques such as straightforward thermal lamination, sandwiching sticky templates with electret films, and screen printing. In particular, uoroethylenepropylene (FEP) _lm systems with tubular-channel openings, prepared by means of the thermal lamination technique, show piezoelectric d33 coefficients of up to 160 pC/N after charging through dielectric barrier discharges (DBDs) . For samples charged at suitable elevated temperatures, the piezoelectricity is stable at temperatures of at least 130°C. These preparation methods are easy to implement at laboratory or industrial scales, and are quite flexible in terms of material selection and cavity geometry design. Due to the uniform and well-controlled cavity structures, samples are also very suitable for fundamental studies on ferroelectrets.
Charging of ferroelectrets is achieved via a series of dielectric barrier discharges (DBDs) inside the cavities. In the present work, the DBD charging process is comprehensively studied by means of optical, electrical and electro-acoustic methods. The spectrum of the transient light from the DBDs in cellular polypropylene (PP) ferroelectrets directly confirms the ionization of molecular nitrogen, and allows the determination of the electric field in the discharge. Detection of the light emission reveals not only DBDs under high applied voltage but also back discharges when the applied voltage is reduced to sufficiently low values. Back discharges are triggered by the internally deposited charges, as the breakdown inside the cavities is controlled by the sum of the applied electric field and the electric field of the deposited charges. The remanent effective polarization is determined by the breakdown strength of the gas-filled cavities. These findings form the basis of more efficient charging techniques for ferroelectrets such as charging with high-pressure air, thermal poling and charging assisted by gas exchange. With the proposed charging strategies, the charging efficiency of ferroelectrets can be enhanced significantly.
After charging, the cavities can be considered as man-made macroscopic dipoles whose direction can be reversed by switching the polarity of the applied voltage. Polarization-versus-electric-field (P(E)) hysteresis loops in ferroelectrets are observed by means of an electro-acoustic method combined with dielectric resonance spectroscopy. P(E) hysteresis loops in ferrroelectrets are also obtained by more direct measurements using a modified Sawyer-Tower circuit. Hysteresis loops prove the ferroic behavior of ferroelectrets. However, repeated switching of the macroscopic dipoles involves complex physico-chemical processes. The DBD charging process generates a cold plasma with numerous active species and thus modifies the inner polymer surfaces of the cavities. Such treatments strongly affect the chargeability of the cavities. At least for cellular PP ferroelectrets, repeated DBDs in atmospheric conditions lead to considerable fatigue of the effective polarization and of the resulting piezoelectricity.
The macroscopic dipoles in ferroelectrets are highly compressible, and hence the piezoelectricity is essentially the primary effect. It is found that the piezoelectric d33 coefficient is proportional to the polarization and the elastic compliance of the sample, providing hints for developing materials with higher piezoelectric sensitivity in the future. Due to their outstanding electromechanical properties, there has been constant interest in the application of ferroelectrets. The antiresonance frequencies (fp) of ferroelectrets are sensitive to the boundary conditions during measurement. A tubular-channel FEP ferroelectret is conformably attached to a self-organized minimum-energy dielectric elastomer actuator (DEA). It turns out that the antiresonance frequency (fp) of the ferroelectret film changes noticeably with the bending angle of the DEA. Therefore, the actuation of DEAs can be used to modulate the fp value of ferroelectrets, but fp can also be exploited for in-situ diagnosis and for precise control of the actuation of the DEA. Combination of DEAs and ferroelectrets opens up various new possibilities for application.
The connection between the macroscopic description of collective chaos and the underlying microscopic dynamics is thoroughly analysed in mean-field models of one-dimensional oscillators. We investigate to what extent infinitesimal perturbations of the microscopic configurations can provide information also on the stability of the corresponding macroscopic phase. In ensembles of identical one-dimensional dynamical units, it is possible to represent the microscopic configurations so as to make transparent their connection with the macroscopic world. As a result, we find evidence of an intermediate, mesoscopic, range of distances, over which the instability is neither controlled by the microscopic equations nor by the macroscopic ones. We examine a whole series of indicators, ranging from the usual microscopic Lyapunov exponents, to the collective ones, including finite-amplitude exponents. A system of pulse-coupled oscillators is also briefly reviewed as an example of non-identical phase oscillators where collective chaos spontaneously emerges.
The characteristics of a landscape pose essential factors for hydrological processes. Therefore, an adequate representation of the landscape of a catchment in hydrological models is vital. However, many of such models exist differing, amongst others, in spatial concept and discretisation. The latter constitutes an essential pre-processing step, for which many different algorithms along with numerous software implementations exist. In that context, existing solutions are often model specific, commercial, or depend on commercial back-end software, and allow only a limited or no workflow automation at all.
Consequently, a new package for the scientific software and scripting environment R, called lumpR, was developed. lumpR employs an algorithm for hillslope-based landscape discretisation directed to large-scale application via a hierarchical multi-scale approach. The package addresses existing limitations as it is free and open source, easily extendible to other hydrological models, and the workflow can be fully automated. Moreover, it is user-friendly as the direct coupling to a GIS allows for immediate visual inspection and manual adjustment. Sufficient control is furthermore retained via parameter specification and the option to include expert knowledge. Conversely, completely automatic operation also allows for extensive analysis of aspects related to landscape discretisation.
In a case study, the application of the package is presented. A sensitivity analysis of the most important discretisation parameters demonstrates its efficient workflow automation. Considering multiple streamflow metrics, the employed model proved reasonably robust to the discretisation parameters. However, parameters determining the sizes of subbasins and hillslopes proved to be more important than the others, including the number of representative hillslopes, the number of attributes employed for the lumping algorithm, and the number of sub-discretisations of the representative hillslopes.