Institut für Informatik und Computational Science
Refine
Document Type
- Doctoral Thesis (18)
- Other (1)
Keywords
- Modell (2)
- model (2)
- non-photorealistic rendering (2)
- virtual 3D city models (2)
- virtuelle 3D-Stadtmodelle (2)
- 3D Computer Grafik (1)
- 3D Computer Graphics (1)
- 3D Drucken (1)
- 3D Semiotik (1)
- 3D Visualisierung (1)
Institute
- Hasso-Plattner-Institut für Digital Engineering gGmbH (19) (remove)
Most of the microelectronic circuits fabricated today are synchronous, i.e. they are driven by one or several clock signals. Synchronous circuit design faces several fundamental challenges such as high-speed clock distribution, integration of multiple cores operating at different clock rates, reduction of power consumption and dealing with voltage, temperature, manufacturing and runtime variations. Asynchronous or clockless design plays a key role in alleviating these challenges, however the design and test of asynchronous circuits is much more difficult in comparison to their synchronous counterparts. A driving force for a widespread use of asynchronous technology is the availability of mature EDA (Electronic Design Automation) tools which provide an entire automated design flow starting from an HDL (Hardware Description Language) specification yielding the final circuit layout. Even though there was much progress in developing such EDA tools for asynchronous circuit design during the last two decades, the maturity level as well as the acceptance of them is still not comparable with tools for synchronous circuit design. In particular, logic synthesis (which implies the application of Boolean minimisation techniques) for the entire system's control path can significantly improve the efficiency of the resulting asynchronous implementation, e.g. in terms of chip area and performance. However, logic synthesis, in particular for asynchronous circuits, suffers from complexity problems. Signal Transitions Graphs (STGs) are labelled Petri nets which are a widely used to specify the interface behaviour of speed independent (SI) circuits - a robust subclass of asynchronous circuits. STG decomposition is a promising approach to tackle complexity problems like state space explosion in logic synthesis of SI circuits. The (structural) decomposition of STGs is guided by a partition of the output signals and generates a usually much smaller component STG for each partition member, i.e. a component STG with a much smaller state space than the initial specification. However, decomposition can result in component STGs that in isolation have so-called irreducible CSC conflicts (i.e. these components are not SI synthesisable anymore) even if the specification has none of them. A new approach is presented to avoid such conflicts by introducing internal communication between the components. So far, STG decompositions are guided by the finest output partitions, i.e. one output per component. However, this might not yield optimal circuit implementations. Efficient heuristics are presented to determine coarser partitions leading to improved circuits in terms of chip area. For the new algorithms correctness proofs are given and their implementations are incorporated into the decomposition tool DESIJ. The presented techniques are successfully applied to some benchmarks - including 'real-life' specifications arising in the context of control resynthesis - which delivered promising results.
The exponential expanding of the numbers of web sites and Internet users makes WWW the most important global information resource. From information publishing and electronic commerce to entertainment and social networking, the Web allows an inexpensive and efficient access to the services provided by individuals and institutions. The basic units for distributing these services are the web sites scattered throughout the world. However, the extreme fragility of web services and content, the high competence between similar services supplied by different sites, and the wide geographic distributions of the web users drive the urgent requirement from the web managers to track and understand the usage interest of their web customers. This thesis, "X-tracking the Usage Interest on Web Sites", aims to fulfill this requirement. "X" stands two meanings: one is that the usage interest differs from various web sites, and the other is that usage interest is depicted from multi aspects: internal and external, structural and conceptual, objective and subjective. "Tracking" shows that our concentration is on locating and measuring the differences and changes among usage patterns. This thesis presents the methodologies on discovering usage interest on three kinds of web sites: the public information portal site, e-learning site that provides kinds of streaming lectures and social site that supplies the public discussions on IT issues. On different sites, we concentrate on different issues related with mining usage interest. The educational information portal sites were the first implementation scenarios on discovering usage patterns and optimizing the organization of web services. In such cases, the usage patterns are modeled as frequent page sets, navigation paths, navigation structures or graphs. However, a necessary requirement is to rebuild the individual behaviors from usage history. We give a systematic study on how to rebuild individual behaviors. Besides, this thesis shows a new strategy on building content clusters based on pair browsing retrieved from usage logs. The difference between such clusters and the original web structure displays the distance between the destinations from usage side and the expectations from design side. Moreover, we study the problem on tracking the changes of usage patterns in their life cycles. The changes are described from internal side integrating conceptual and structure features, and from external side for the physical features; and described from local side measuring the difference between two time spans, and global side showing the change tendency along the life cycle. A platform, Web-Cares, is developed to discover the usage interest, to measure the difference between usage interest and site expectation and to track the changes of usage patterns. E-learning site provides the teaching materials such as slides, recorded lecture videos and exercise sheets. We focus on discovering the learning interest on streaming lectures, such as real medias, mp4 and flash clips. Compared to the information portal site, the usage on streaming lectures encapsulates the variables such as viewing time and actions during learning processes. The learning interest is discovered in the form of answering 6 questions, which covers finding the relations between pieces of lectures and the preference among different forms of lectures. We prefer on detecting the changes of learning interest on the same course from different semesters. The differences on the content and structure between two courses leverage the changes on the learning interest. We give an algorithm on measuring the difference on learning interest integrated with similarity comparison between courses. A search engine, TASK-Moniminer, is created to help the teacher query the learning interest on their streaming lectures on tele-TASK site. Social site acts as an online community attracting web users to discuss the common topics and share their interesting information. Compared to the public information portal site and e-learning web site, the rich interactions among users and web content bring the wider range of content quality, on the other hand, provide more possibilities to express and model usage interest. We propose a framework on finding and recommending high reputation articles in a social site. We observed that the reputation is classified into global and local categories; the quality of the articles having high reputation is related with the content features. Based on these observations, our framework is implemented firstly by finding the articles having global or local reputation, and secondly clustering articles based on their content relations, and then the articles are selected and recommended from each cluster based on their reputation ranks.
Interactive rendering techniques for focus+context visualization of 3D geovirtual environments
(2013)
This thesis introduces a collection of new real-time rendering techniques and applications for focus+context visualization of interactive 3D geovirtual environments such as virtual 3D city and landscape models. These environments are generally characterized by a large number of objects and are of high complexity with respect to geometry and textures. For these reasons, their interactive 3D rendering represents a major challenge. Their 3D depiction implies a number of weaknesses such as occlusions, cluttered image contents, and partial screen-space usage. To overcome these limitations and, thus, to facilitate the effective communication of geo-information, principles of focus+context visualization can be used for the design of real-time 3D rendering techniques for 3D geovirtual environments (see Figure). In general, detailed views of a 3D geovirtual environment are combined seamlessly with abstracted views of the context within a single image. To perform the real-time image synthesis required for interactive visualization, dedicated parallel processors (GPUs) for rasterization of computer graphics primitives are used. For this purpose, the design and implementation of appropriate data structures and rendering pipelines are necessary. The contribution of this work comprises the following five real-time rendering methods: • The rendering technique for 3D generalization lenses enables the combination of different 3D city geometries (e.g., generalized versions of a 3D city model) in a single image in real time. The method is based on a generalized and fragment-precise clipping approach, which uses a compressible, raster-based data structure. It enables the combination of detailed views in the focus area with the representation of abstracted variants in the context area. • The rendering technique for the interactive visualization of dynamic raster data in 3D geovirtual environments facilitates the rendering of 2D surface lenses. It enables a flexible combination of different raster layers (e.g., aerial images or videos) using projective texturing for decoupling image and geometry data. Thus, various overlapping and nested 2D surface lenses of different contents can be visualized interactively. • The interactive rendering technique for image-based deformation of 3D geovirtual environments enables the real-time image synthesis of non-planar projections, such as cylindrical and spherical projections, as well as multi-focal 3D fisheye-lenses and the combination of planar and non-planar projections. • The rendering technique for view-dependent multi-perspective views of 3D geovirtual environments, based on the application of global deformations to the 3D scene geometry, can be used for synthesizing interactive panorama maps to combine detailed views close to the camera (focus) with abstract views in the background (context). This approach reduces occlusions, increases the usage the available screen space, and reduces the overload of image contents. • The object-based and image-based rendering techniques for highlighting objects and focus areas inside and outside the view frustum facilitate preattentive perception. The concepts and implementations of interactive image synthesis for focus+context visualization and their selected applications enable a more effective communication of spatial information, and provide building blocks for design and development of new applications and systems in the field of 3D geovirtual environments.
Business process models are used within a range of organizational initiatives, where every stakeholder has a unique perspective on a process and demands the respective model. As a consequence, multiple process models capturing the very same business process coexist. Keeping such models in sync is a challenge within an ever changing business environment: once a process is changed, all its models have to be updated. Due to a large number of models and their complex relations, model maintenance becomes error-prone and expensive. Against this background, business process model abstraction emerged as an operation reducing the number of stored process models and facilitating model management. Business process model abstraction is an operation preserving essential process properties and leaving out insignificant details in order to retain information relevant for a particular purpose. Process model abstraction has been addressed by several researchers. The focus of their studies has been on particular use cases and model transformations supporting these use cases. This thesis systematically approaches the problem of business process model abstraction shaping the outcome into a framework. We investigate the current industry demand in abstraction summarizing it in a catalog of business process model abstraction use cases. The thesis focuses on one prominent use case where the user demands a model with coarse-grained activities and overall process ordering constraints. We develop model transformations that support this use case starting with the transformations based on process model structure analysis. Further, abstraction methods considering the semantics of process model elements are investigated. First, we suggest how semantically related activities can be discovered in process models-a barely researched challenge. The thesis validates the designed abstraction methods against sets of industrial process models and discusses the method implementation aspects. Second, we develop a novel model transformation, which combined with the related activity discovery allows flexible non-hierarchical abstraction. In this way this thesis advocates novel model transformations that facilitate business process model management and provides the foundations for innovative tool support.
Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner.
Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units.
This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution.
Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays.
Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept.
Structuring process models
(2012)
One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available.
Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions.
In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well.
We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms.
By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output.
By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time.
We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright.
Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages – for example FMC or BPMN – with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications.
Im Mittelpunkt dieser Arbeit stehen virtuelle 3D-Stadtmodelle, die Objekte, Phänomene und Prozesse in urbanen Räumen in digitaler Form repräsentieren. Sie haben sich zu einem Kernthema von Geoinformationssystemen entwickelt und bilden einen zentralen Bestandteil geovirtueller 3D-Welten. Virtuelle 3D-Stadtmodelle finden nicht nur Verwendung als Mittel für Experten in Bereichen wie Stadtplanung, Funknetzplanung, oder Lärmanalyse, sondern auch für allgemeine Nutzer, die realitätsnah dargestellte virtuelle Städte in Bereichen wie Bürgerbeteiligung, Tourismus oder Unterhaltung nutzen und z. B. in Anwendungen wie GoogleEarth eine räumliche Umgebung intuitiv erkunden und durch eigene 3D-Modelle oder zusätzliche Informationen erweitern. Die Erzeugung und Darstellung virtueller 3D-Stadtmodelle besteht aus einer Vielzahl von Prozessschritten, von denen in der vorliegenden Arbeit zwei näher betrachtet werden: Texturierung und Visualisierung. Im Bereich der Texturierung werden Konzepte und Verfahren zur automatischen Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern sowie zur Speicherung oberflächengebundener Daten in virtuellen 3D-Stadtmodellen entwickelt. Im Bereich der Visualisierung werden Konzepte und Verfahren für die multiperspektivische Darstellung sowie für die hochqualitative Darstellung nichtlinearer Projektionen virtueller 3D-Stadtmodelle in interaktiven Systemen vorgestellt. Die automatische Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern ermöglicht die Veredelung vorliegender virtueller 3D-Stadtmodelle. Schrägluftbilder bieten sich zur Texturierung an, da sie einen Großteil der Oberflächen einer Stadt, insbesondere Gebäudefassaden, mit hoher Redundanz erfassen. Das Verfahren extrahiert aus dem verfügbaren Bildmaterial alle Ansichten einer Oberfläche und fügt diese pixelpräzise zu einer Textur zusammen. Durch Anwendung auf alle Oberflächen wird das virtuelle 3D-Stadtmodell flächendeckend texturiert. Der beschriebene Ansatz wurde am Beispiel des offiziellen Berliner 3D-Stadtmodells sowie der in GoogleEarth integrierten Innenstadt von München erprobt. Die Speicherung oberflächengebundener Daten, zu denen auch Texturen zählen, wurde im Kontext von CityGML, einem international standardisierten Datenmodell und Austauschformat für virtuelle 3D-Stadtmodelle, untersucht. Es wird ein Datenmodell auf Basis computergrafischer Konzepte entworfen und in den CityGML-Standard integriert. Dieses Datenmodell richtet sich dabei an praktischen Anwendungsfällen aus und lässt sich domänenübergreifend verwenden. Die interaktive multiperspektivische Darstellung virtueller 3D-Stadtmodelle ergänzt die gewohnte perspektivische Darstellung nahtlos um eine zweite Perspektive mit dem Ziel, den Informationsgehalt der Darstellung zu erhöhen. Diese Art der Darstellung ist durch die Panoramakarten von H. C. Berann inspiriert; Hauptproblem ist die Übertragung des multiperspektivischen Prinzips auf ein interaktives System. Die Arbeit stellt eine technische Umsetzung dieser Darstellung für 3D-Grafikhardware vor und demonstriert die Erweiterung von Vogel- und Fußgängerperspektive. Die hochqualitative Darstellung nichtlinearer Projektionen beschreibt deren Umsetzung auf 3D-Grafikhardware, wobei neben der Bildwiederholrate die Bildqualität das wesentliche Entwicklungskriterium ist. Insbesondere erlauben die beiden vorgestellten Verfahren, dynamische Geometrieverfeinerung und stückweise perspektivische Projektionen, die uneingeschränkte Nutzung aller hardwareseitig verfügbaren, qualitätssteigernden Funktionen wie z.~B. Bildraumgradienten oder anisotroper Texturfilterung. Beide Verfahren sind generisch und unterstützen verschiedene Projektionstypen. Sie ermöglichen die anpassungsfreie Verwendung gängiger computergrafischer Effekte wie Stilisierungsverfahren oder prozeduraler Texturen für nichtlineare Projektionen bei optimaler Bildqualität. Die vorliegende Arbeit beschreibt wesentliche Technologien für die Verarbeitung virtueller 3D-Stadtmodelle: Zum einen lassen sich mit den Ergebnissen der Arbeit Texturen für virtuelle 3D-Stadtmodelle automatisiert herstellen und als eigenständige Attribute in das virtuelle 3D-Stadtmodell einfügen. Somit trägt diese Arbeit dazu bei, die Herstellung und Fortführung texturierter virtueller 3D-Stadtmodelle zu verbessern. Zum anderen zeigt die Arbeit Varianten und technische Lösungen für neuartige Projektionstypen für virtueller 3D-Stadtmodelle in interaktiven Visualisierungen. Solche nichtlinearen Projektionen stellen Schlüsselbausteine dar, um neuartige Benutzungsschnittstellen für und Interaktionsformen mit virtuellen 3D-Stadtmodellen zu ermöglichen, insbesondere für mobile Geräte und immersive Umgebungen.