Refine
Year of publication
Document Type
- Article (31)
- Monograph/Edited Volume (5)
- Doctoral Thesis (1)
- Part of Periodical (1)
Is part of the Bibliography
- yes (38)
Institute
We study thermally induced birefringence in crystalline Nd:YAG zigzag slab lasers and the associated depolarization losses. The optimum crystallographic orientation of the zigzag slab within the Nd:YAG boule and photoelastic effects in crystalline Nd:YAG slabs are briefly discussed. The depolarization is evaluated using the temperature and stress distributions, calculated using a finite element model, for realistically pumped and cooled slabs of finite dimensions. Jones matrices are then used to calculate the depolarization of the zigzag laser mode. We compare the predictions with measurements of depolarization, and suggest useful criteria for the design of the gain media for such lasers.
In side pumped laser head geometries good extraction of energy has to be weighted against diffraction effects of the amplified beam. Beam clipping at the aperture of laser rods can be avoided by using an undoped cladding around the doped core. The wings of e. g. Gaussian beams can be accommodated in the cladding. Phase distortion by the refractive index step of the rod can be compensated by a phase conjugating mirror in double pass configuration. In our proof of principle experiment the brightness of the beam from core doped amplifier rods was shown to be doubled compared to a conventional rod of the same outer diameter. (c) 2006 Optical Society of America
We present a flashlamp-pumped Nd: YAG laser simultaneously emitting pulse structures on microsecond, nanosecond and picosecond time scales. Within a microsecond flashlamp pump pulse a nonlinear reflector based on stimulated Brillouin scattering (SBS) generates several Q-switch pulses. The phase-conjugating effect of the SBS reflector provides a compensation of phase distortions generated inside the laser rod, resulting in transverse fundamental mode operation. Additional acousto-optic loss modulation inside the resonator leads to mode locking. As a result, each Q-switch pulse is subdivided into several picosecond pulses. Energies of up to 2 mJ for the mode-locked pulses with durations between 220 and 800 ps are demonstrated. The wide variability of the laser's temporal output parameters as well as its high beam quality make it a splendid tool for fundamental research in laser materials processing
A passively Q-switched laser with a nonlinear mirror on the basis of stimulated Brillouin scattering (SBS), generates bursts of pulses with a few 10 ns pulse duration and a separation between 20-90 mu s. Percussion drilling and trepanning are performed in different materials with 1 mm thickness. The optimum parameter set of these pulse trains with regard to the burr height and ablation rate is investigated. Differences in the processing results between single pulse and multi pulse structures are discussed. In addition the laser allowed for transiently mode locked operation. Results for mode locked and merely Q-switched operation were compared
The application of the recently developed core doped ceramic Nd:YAG rods has the potential to provide better beam qualities compared to conventional rods since the hard aperture of the rod's boundary can be made wider while the width of the gain region remains the same. Thus, beam truncation and consequential diffraction can be reduced. We apply a finite elements model to calculate the resulting refractive index profiles in conventional and core doped rods. Propagating a Gaussian beam through both rod geometries the impact of aberrations and diffraction is compared for different side pumped scenarios. The potential advantage of the core doped geometry is discussed. (c) 2005 Optical Society of America
A pulsed, diode-laser-pumped Nd:YAG master oscillator power amplifier (MOPA) in rod geometry, frequency stabilized with a modified Pound-Drever-Hall scheme is presented. The apparatus delivers 33-ns pulses with a maximum pulse energy of 0.5 J at 1064 nm. The system was set up in two different configurations for repetition rates of 100 or 250 Hz. The beam quality was measured to be 1.5 times the diffraction limit at a pulse energy of 405 mJ and a repetition rate of 100 Hz. At 250 Hz with the same pulse energy, the M-2 was better than 2.1. The radiation is frequency converted with an efficiency of 50% to 532 nm. This MOPA system will be the pump laser of transmitters for a variety of high-end, scanning lidar systems. (C) 2005 Optical Society of America