Refine
Year of publication
Document Type
- Article (93)
- Postprint (10)
- Monograph/Edited Volume (1)
- Other (1)
- Review (1)
Is part of the Bibliography
- yes (106)
Keywords
- fluorescence (7)
- fluorescent probes (7)
- Palladium (6)
- crown compounds (6)
- potassium (6)
- adsorption (5)
- metal-organic frameworks (4)
- sensors (4)
- sodium (4)
- zinc (4)
A simple way to prepare cucurbit[5]uril is described. The macrocycles of the cucurbituril type are nearly insoluble in water. The solubilities of cucurbit[5]uril, decamethylcucurbit[5]uril and cucurbit[6]uril in hydrochloric acid, formic acid and acetic acid of different concentrations have been investigated. Due to the formation of complexes between cucurbit[n]urils and protons the solubility increases in aqueous acids. The macrocyclic ligands are able to form complexes with several organic compounds. Thus, the complex formation of the cucurbituril macrocycles with different amines has beenstudied by means of calorimetric titrations. The reaction enthalpy gives noevidence of the formation of inclusion or exclusion complexes. 1H-NMR measurements show that in the case of cucurbit[5]uril and cucurbit[6]uril the organic guest compound is included within the hydrophobic cavity. Decamethylcucurbit[5]uril forms only exclusion complexes with organicamines. This was confirmed by the crystal structure of the decamethylcucurbit[5]uril-1,6- diaminohexane complex. complex formation - cucurbit[5]uril - cucurbit[6]uril - decamethylcucurbit[5]uril - solubility - synthesis
Equilibrium constants and thermodynamic parameters for the complexation of nickel(II) and cobalt(II) by noncyclic, monocyclic and bicyclic ligands in acetonitrile have been determined by calorimetric titrations. The donor atoms and the ring size of the ligands play an important role for the stabilities of the complexes formed. An increasing number of nitrogen atoms in the crown ether favours complex formation. The number of nitrogen donor atoms of the macro- cyclic ligands examined has a direct influence on the values of the reaction enthalpies. Keywords: Complex formation; crown ethers; azacrown ethers; thiacrown ethers; cryptands; acetonitrile
Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different K-d values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (K-d=106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K-d=78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm.
1H, 13C, and 15N NMR study of the solution structure of metabridged bis(benzo-15-crown-5-ether)s
(1995)
There is a tremendous demand for highly Na+-selective fluoroionophores to monitor the top analyte Na+ in life science. Here, we report a systematic route to develop highly Na+/K+ selective fluorescent probes. Thus, we synthesized a set of fluoroionophores 1, 3, 4, 5, 8 and 9 (see Scheme 1) to investigate the Na+/K+ selectivity and Na(+-)complex stability in CH3CN and H2O. These Na+-probes bear different 15-crown-5 moieties to bind Na+ stronger than K+. In the set of the diethylaminocoumarin-substituted fluoroionophores 1-5, the following trend of fluorescence quenching 1 > 3 > 2 > 4 > 5 in CH3CN was observed. Therefore, the flexibility of the aza-15-crown-5 moieties in 1-4 determines the conjugation of the nitrogen lone pair with the aromatic ring. As a consequence, 1 showed in CH3CN the highest Na+-induced fluorescence enhancement (FE) by a factor of 46.5 and a weaker K+ induced FE of 3.7. The Na+-complex stability of 1-4 in CH3CN is enhanced in the following order of 2 > 4 > 3 > 1, assuming that the O-atom of the methoxy group in the ortho-position, as shown in 2, strengthened the Na+-complex formation. Furthermore, we found for the N( o-methoxyphenyl) aza-15-crown-5 substituted fluoroionophores 2, 8 and 9 in H2O, an enhanced Na+-complex stability in the following order 8 > 2 > 9 and an increased Na+/K+ selectivity in the reverse order 9 > 2 > 8. Notably, the Na+-induced FE of 8 (FEF = 10.9), 2 (FEF = 5.0) and 9 (FEF = 2.0) showed a similar trend associated with a decreased K+-induced FE [8 (FEF = 2.7) > 2 (FEF = 1.5) > 9 (FEF = 1.1)]. Here, the Na+-complex stability and Na+/K+ selectivity is also influenced by the fluorophore moiety. Thus, fluorescent probe 8 (K-d = 48 mm) allows high-contrast, sensitive, and selective Na+ measurements over extracellular K+ levels. A higher Na+/K+ selectivity showed fluorescent probe 9, but also a higher Kd value of 223 mm. Therefore, 9 is a suitable tool to measure Na+ concentrations up to 300 mm at a fluorescence emission of 614 nm.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes.
A series of new monocationic iridium(III) complexes [Ir((CN)-N-boolean AND)(2)((NN)-N-boolean AND)]PF6 with "large-surface" alpha,alpha'-diimin ligands (NN)-N-boolean AND (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands (CN)-N-boolean AND (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF6, [Ir(bzq)(2)(dap)]PF6, [Ir(ppy)(2)(dipdap)]PF6, [Ir(piq)(2)(dmedap)]PF6, [Ir(ppy)(2)(dap)]PF6 and [Ir(ppz)(2)(dap)]PF6 are reported. In [Ir(piq)(2)(dap)]PF6, the dap ligand and one of the piq ligands of each cationic complex are involved in pi-pi stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF6 pi-pi stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-pi interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF6 and [Ir(bzq)(2)(dap)]PF6. The crystal structures of [Ir(ppy)(2)(dipdap)]PF6 and [Ir(ppy)(2)(dmedap)]PF6 are also presented, being the first examples of bis-cyclometalated iridium(III) complexes with phenanthroline-type alpha,alpha'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N-N boolean AND N bonds. The new iridium (III) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N-N boolean AND N bond lengths.
Ruthenium(II) complexes [Ru(L-N4Me2)(dape)](PF6)2 {[1](PF6)2}, [Ru(L-N4Me2)(tape)](PF6)2 {[2](PF6)2}, and [{Ru(L-N4Me2)}2(mu-tape)](PF6)4 {[3](PF6)4} were synthesized in two reaction steps by first reacting [Ru(DMSO)4Cl2] with tetraazamacrocyclic ligand N,N'-dimethyl-2,11-diaza[3.3](2,6)-pyridinophane (L-N4Me2) in ethanol under microwave irradiation to the intermediate [Ru(L-N4Me2)Cl2], which was subsequently, without further isolation, reacted with 1,12-diazaperylene (dape) or 1,6,7,12-tetraazaperylene (tape). X-ray structures of [Ru(L-N4Me2)(dape)](PF6)2, [Ru(L-N4Me2)(tape)](PF6)2.acetone, and [{Ru(L-N4Me2)}2(mu-tape)](ClO4)4.MeCN were determined. The UV/Vis absorption spectra of [1](PF6)2, [2](PF6)2, and [3](PF6)4 in acetonitrile display intense low-energy dp(Ru)?p* (dape or tape) MLCT absorption bands centered at 579, 637, and 794 nm, respectively. Reversible metal oxidations for the bimetallic complex [{Ru(L-N4Me2)}2(mu-tape)]4+ ([3]4+) are detected at 1.69 and 1.28 V vs. SCE. The potential difference ?E = 410 mV and the intervalence-charge-transfer (IVCT) transition at 2472 nm indicate a high degree of electronic interaction between the two ruthenium ions mediated through the tape bridging ligand. All three complexes, [1]2+, [2]2+, and [3]4+, were characterized by UV/Vis spectroelectrochemistry. The monooxidized and monoreduced states, [1]3+, [2]3+, [3]5+, and [1]+, [2]+, [3]3+, are accessible by reversible one-electron oxidation and one-electron reduction processes, respectively, as documented by the observation of several stable isosbestic points in the spectral progressions. The second reduction in each complex and the second oxidation in [3]4+ prove to be irreversible in these spectroelectrochemical experiments. Monoreduced species [1]+, [2]+, and [3]3+ yield EPR signals indicating that the unpaired electron is mainly centered on the large surface ligands dape or tape.
The chelating dithioether 1,2-bis(2-methoxyethylthio)benzene. a novel solvent extractant for Pd(II), is aimed to be utilised in the selective recovery of palladium from spent automotive catalysts. For that, the extraction system has been further customised, including the choice of an appropriate diluent (1,2-dichlorobenzene) as well as an effective stripping agent (0.5 M thiourea in 0.1 M HCl), which both have been selected from a number of potential agents. It is shown in batch experiments that the selectivity for Pd(II) is maintained when the organic phase (10(-2) M 1,2-bis(2-methoxyethylthio)benzene in 1,2-dichlorobenzene) is used several times to extract an oxidising leach solution. According to the McCabe-Thiele plot two theoretical stages are needed to extract more than 98% of the Pd(II) contained in that solution. The calculation of the thermodynamic quantities Delta H degrees. Delta S degrees and Delta G degrees reveals that the reaction is entropy driven - the temperature has only a slight influence on the extraction yield. It is demonstrated that the mono-oxidised extractant has a catalytic effect on the extraction kinetics when the aqueous phase contains highly concentrated hydrochloric acid. HPLC measurements prove the presence of small quantities of 1-(2-methoxyethylsulfinyl)-2-(2-methoxyethylthio) benzene in the organic phase.
We report the synthesis of free 1,6,7,12-tetraazaperylene (tape). Tape was obtained from 1,1'-bis-2,7-naphthyridine by potassium promoted cyclization followed by oxidation with air. Mono-and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes of the general formulas [Ru(L-L)(2)(tape)](PF6)(2), [1] (PF6)(2)-[5](PF6)(2), and [{Ru(L-L)(2)}(2)(mu-tape)](PF6)(4), [6](PF6)(4)-[10](PF6)(4), with{L-L = phen, bpy, dmbpy (4,4'-dimethyl-2,2'-bipyridine), dtbbpy (4,4'-ditertbutyl-2,2'-bipyridine) and tmbpy (4,4' 5,5'-tetramethyl-2,2'- bipyridine)}, respectively, were synthesized. The X-ray structures of tape center dot 2CHCl(3) and the mononuclear complexes [Ru(bpy)(2)(tape)](PF6)(2)center dot 0.5CH(3)CN center dot 0.5toluene, [Ru(dmbpy)(2)(tape)] (PF6)(2)center dot 2toluene and [Ru(dtbbpy)(2)(tape)](PF6)(2) center dot 3acetone center dot 0.5H(2)O were solved. The UV-vis absorption spectra and the electrochemical behavior of the ruthenium(II) tape complexes were explored and compared with the data of the analogous dibenzoeilatin (dbneil), 2,2'-bipyrimidine (bpym) and tetrapyrido [3,2-a:2',3'-c:3 '',2''-h:2''',3'''-j] phenazin (tpphz) species.
There is a demand for new and robust PdII extractants due to growing recycling rates. Chelating dithioethers are promising substances for solvent extraction as they form stable square-planar complexes with PdII. We have modified unsaturated dithioethers, which are known to coordinate PdII, and adapted them to the requirements of industrial practice. The ligands are analogues of 1,2-dithioethene with varying electron-withdrawing backbones and polar end-groups. The crystal structures of several ligands and their palladium complexes were determined as well as their electro- and photochemical properties, complex stability and behaviour in solution. Solvent extraction experiments showed the superiority of some of our ligands over conventionally used extractants in terms of their very fast reaction rates. With highly selective 1,2-bis(2-methoxyethylthio)benzene (4) it is possible to extract PdII from a highly acidic medium in the presence of other base and palladium-group metals.
A series of diols (diethylene glycol, triethylene glycol, butane-1,4-diol and hexane-1,6-diol) were immobilized onto Merrifield resin and subsequently phosphorylated with dialkyl chlorophosphate (alkyl = Me, Et, Bu). The resins bearing hexane-1,6-diyl groups exhibited very good extraction abilities in regard to precious metal chloro complexes like platinum(IV), palladium(II) and rhodium(III). In batch experiments, more than 98% of Pt(IV) is extracted even when the metal and the hydrochloric acid concentration is enhanced significantly. Elution can be achieved with a solution of 0.5 mol L-1 thiourea in 0.1 mol L-1 hydrochloric acid. In the presence of other noble metals, platinum(IV) is preferentially bound. The extraction yield decreases in slightly acidic solution in the following order: Pt(IV)approximate to Pd(II)>Rh(III) and changes with increasing hydrochloric acid concentration to Pt(IV)>Pd(II)>> Rh(III). At different ratios of metal and acid, the temperature has nearly no influence on the platinum extraction. On slightly acidic media, the extraction of rhodium decreases by 30% when the temperature is increased from 10 degrees C to 40 degrees C. When the acid and metal concentration is enhanced, the palladium extraction decreases by 7-9%, depending on the resin.
The new pi-conjugated 1,2,3-triazol-1,4-diyl fluoroionophore 1 generated via Cu(I) catalyzed [3 + 2] cycloaddition shows high fluorescence enhancement factors (FEF) in the presence of Na+ (FEF = 58) and K+ (FEF = 27) in MeCN and high selectivity towards K+ under simulated physiological conditions (160 mM K+ or Na+, respectively) with a FEF of 2.5 for K+.
A series of three dialkyl phosphate resins with a Merrifield resin support was used to extract platinum from acidic media. In column operations total capacities of 85-130 mg/g were gained. The presence of palladium and rhodium results in the order: Pt(IV) > Pd(II) >> Rh(III). From a leach liquor gained from spent automotive catalysts metals forming anionic chloro complexes are co-extracted only to a small extent. However, in order to separate and enrich platinum a selective back-extraction can be done with a sodium thiocyanate solution. A second elution step with acidic thiourea leads to a mixed solution of palladium and rhodium.
The complex formation of the following diazaperylene ligands (L) 1,12-diazaperylene 1, 1,1-bisisoquinoline 2, 2,11-disubstituted 1,12-diazaperylenes (alkyl=methyl, ethyl, isopropyl, 3, 5, 7), 3,3-disubstituted 1,1-bisisoquinoline (alkyl=methyl, ethyl, isopropyl, 4, 6, 8 and with R=phenyl, 11 and with pyridine 12), and the 5,8-dimethoxy-substituted diazaperylene 9, 6,6-dimethoxy-substituted bisisoquinoline 10 with AgBF4 was investigated. Collision-induced dissociation measurements were used to evaluate the relative stabilities of the ligands themselves and for the [1:1](+) complexes as well as for the homoleptic and heteroleptic silver [1:2](+) complexes in the gas phase. This method is very useful in rapid screening of the stabilities of new complexes in the gas phase. The influence of the spatial arrangement of the ligands and the type of substituents employed for the complexation were examined. The effect of the preorganization of the diazaperylene on the threshold activation voltages and thus of the relative binding energies of the different complexes are discussed. Density functional theory calculations were used to calculate the optimized structures of the silver complexes and compared with the stabilities of the complexes in the gas phase for the first time.
This work presents two molecular fluorescent probes 1 and 2 for the selective determination of physiologically relevant K+ levels in water based on a highly K+/Na+ selective building block, the o-(2-methoxyethoxy)phenylaza-18-crown-6 lariat ether unit. Fluorescent probe 1 showed a high K+-induced fluorescence enhancement (FE) by a factor of 7.7 of the anthracenic emission and a dissociation constant (K-d) value of 38mm in water. Further, for 2+K+, we observed a dual emission behavior at 405 and 505nm. K+ increases the fluorescence intensity of 2 at 405nm by a factor of approximately 4.6 and K+ decreases the fluorescence intensity at 505nm by a factor of about 4.8. Fluorescent probe 2+K+ exhibited a K-d value of approximately 8mm in Na+-free solutions and in combined K+/Na+ solution a similar K-d value of about 9mm was found, reflecting the high K+/Na+ selectivity of 2 in water. Therefore, 2 is a promising fluorescent tool to measure ratiometrically and selectively physiologically relevant K+ levels.
Especially sulphur containing compounds are suitable for the separation of noble metals. 1,2-Dithioethenes are weak chelate-forming ligands and in the case of bis(methylthio)maleo-nitrile the donor power of both of the sulphur atoms is further decreased by the electron withdrawing effect of the cyanogroups. Crowned dithiomaleonitrile are macrocyclic chelate ligands which extract Pd(II) at sufficient rate in a very good yields. The synthesis of the immobilised ligands proceeds from the 2-allyloxy-1,2-propanediol forming the dicar-bon acid which is reduced to the diole. With the help of thionylchloride the dichloro compound is synthe-sized forming the macrocycle together with a dithiolate (1,2-disodium-1,2-dicyanethene-1,2-dithiolate, 1,2-disodium-4-methylbenzene-1,2-dithiolate) at high dilution conditions. The allylsubstituted crown ether is sillylated and the resulting alkoxysilane is immobilised onto activated silica gel. The extraction results with crown ethers are compared with that achieved with the help of substituted ß- diketones and 4-acyl-5-pyrazolones. By modification of the cavity of the macrocyclus the extraction rate increases from the acyclic compound through maleonitrile-dithio-21-crown-7, maleonitrile-dithio-15-crown-5 and maleonitrile-18-crown-6. The best results can be observed at the maleonitrile-dithio-12-crown-4. The rise of the function log D= f(log L) gives the composition of the extracted compounds as 1:1. The separa-tion is unsatisfactory in the case of Ag(I), Hg(II), Pt(II), Tl (I) and the most 3d-elements. Summarizing, a very good separation of palladium from the examined elements can be specified. Additional to the extraction experiments, as well as the crystal structures and by UV spectroscopy the for- mation constants of selected chelates were determined.
Both the conformation and flexibility of four mixed oxathia crown ethers and their Ag(I) and Pd(II) complexes were studied by H-1 NMR (delta, J, NOE, T-1), C-13 NMR, dynamic 1H NMR spectroscopy and molecular modelling. The stoichiometry and stability constants of the complexes were determined from corresponding Job's plots in the case of Ag(I) complexes as the interchange between free and complexed states was fast on the NMR timescale; interchange for the Pd(II) complexes was sufficiently slow such that distinct sub-spectra were observable for the free and complexed states. In all cases where complexation was observed, 1 : 1 complexes were formed. Global minima structures determined from the modelling studies were analysed with respect to the barriers to ring interconversion, the flexibility of the species in solution and the preferred complexation of Ag(I) and Pd(II) to the sulfur atoms of the crown ethers
The synthesis and single crystal X-ray structures of eight AgI, HgII, and PtII complexes with the thiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S4), maleonitrile-tetrathia-13-crown-4 (mn13S4), and maleonitrile- pentathia-15-crown-5 (mn15S5) (1) are reported. The ligand mn15S5 was synthesized for the first time and characterized by X-ray diffraction. With silver(I) perchlorate and silver(I) tetrafluoroborate it forms the chiral complexes [Ag(mn15S5)]ClO4·CH3NO2 (2) and [Ag(mn15S5)]BF4·CH3NO2·0.25H2O (3) with half-sandwich moieties. AgI is located in a distorted tetrahedral coordination environment, involving three sulfur atoms of the crown cycle and a fourth one of the adjacent half-sandwich moiety, forming a helical structure. The reaction of Hg(ClO4)2 with mn13S4 yielded the dinuclear complex [Hg2(mn13S4)3](ClO4)4 (4) containing two half-sandwich moieties with a third ligand molecule as a bridging unit. Mercury(II) chloride and mercury(II) iodide react with mn12S4 and mn13S4 to form complexes of the general composition [HgX2(L)] (X = Cl, I; L = mn12S4, mn13S4): [HgCl2(mn12S4)] (5), [HgI2(mn12S4)] (6), [HgCl2(mn13S4)] (7) or [HgX2(L)2] (X = I; L = mn13S4): [HgI2(mn13S4)2] (8). Only one or two sulfur atoms of the ligand are involved in the complexation, and chain or ribbon structures are formed. In these compounds the HgX2 units (X = Cl, I) are preserved, coordinated by sulfur atoms of bridging mn12S4 or mn13S4 ligands. In all complexes of this type, the metal atoms are not coordinated inside the cavity, but in an exocyclic mode, because the diameter of the macrocycle is too small. Additionally, the PtCl2 complex of mn12S4 was investigated, where PtII is coordinated in an exocyclic mode forming the complex [PtCl2(mn12S4)] (9). Two of the four sulfur atoms of the macrocycle are bonded to the metal giving together with both chlorine atoms a square-planar coordination geometry. Together with a long-range interaction with a further sulfur atom of the macrocycle a square-pyramidal coordination environment is formed.
2,11-Dialkylated 1,12-diazaperylenes (alkyl = Me, Et, iPr) dmedap, detdap and dipdap have been synthesized by reductive cyclization of 3,3-dialkylated 1,1-biisoquinolines 3a-c, resulting in the first copper(I) complexes of a large- surface ligand. The new copper(I) complexes show low-energy MLCT absorptions unprecedented for bis(-diimin)copper(I) complexes. The solid structures of the complexes[Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, [Cu(dipdap)2]OTf·CH2Cl2, [Cu(dipdap)2]I·C2H4Cl2·THF·2H2O, [Cu(dmedap)2]OTf and [Cu(dipdap)2]AQSO3·H2O (AQSO3 = sodium 9,10-dihydro-9,10-dioxo-2- anthracenesulfonate) are reported. In [Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, each copper(I) complex cation interacts with two others by - stacking interactions forming a novel supramolecular column structural motif running along the crystallographic c axis. In the crystalline compound [Cu(dipdap)2]AQSO3·H2O, aggregation between two complex cations and two additional anions by - stacking interactions is observed, leading to a tetrameric assembly. Furthermore, the three complex compounds [Cu(L)2]BF4 (L = dmedap, detdap, dipdap) were tested for sensory applications in aqueous buffer solutions in electrochemical studies of the complex immobilized on glassy carbon electrodes.
Narrow channels with polar walls are the structural and functional features responsible for the high capacity of a zinc-organic framework based on an imidazolate-amide-imidate ligand for the uptake of H2 and CO2 (see structure: orange Zn, blue N, red O, dark gray C, light gray H). The rigid and stable chelating ligand was synthesized in situ by partial hydrolysis of a dicyanoimidazole compound.
The new N-heterocyclic carbene (NHC) complex [PdCl2{(CN)(2)IMes}(PPh3)] (2) ({(CN)(2)IMes}: 4,5-dicyano-1,3-dimesitylimidazol-2-ylidene) and the NHC palladacycle [PdCl(dmba){(CN)(2)IMes}] (3) (dmba: N,N-dimethylbenzylamine) have been synthesized by thermolysis of 4,5-dicyano-1,3-dimesityl-2-(pentafluorophenyl) imidazoline (1) in the presence of suitable palladium(II) precursors. The acyclic complex 2 was formed by ligand exchange using the mononuclear precursor [PdCl2(PPh3)(2)] and the palladacycle 3 was formed by cleavage of the dinuclear chloro-bridged precursor [Pd(mu-Cl)(dmba)](2). The new NHC precursor 1-benzyl-4,5-dicyano-2-(pentafluorophenyl)-3-picolylimidazoline (5) was formed by condensation of pentafluorobenzaldehyde with N-benzyl-N'-picolyldiaminomaleonitrile (4). The NHC palladacycle [PdCl2{(CN)(2)IBzPic}] (6) ({(CN)(2)IBzPic}: 1-benzyl-4,5-dicyano-3-picolylimidazol-2-ylidene) was prepared by in situ thermolysis of 5 in the presence of [PdCl2(PhCN)(2)]. The three palladium(II) complexes were characterized by NMR and IR spectroscopy, mass spectrometry and elemental analysis. In addition, the molecular structures of 2 and 3 were determined by X-ray diffraction. The pi-acidity of (CN)(2)IBzPic was compared with (CN)(2)IMes and perviously reported pi-acidic imidazol-2-ylidenes by NBO analysis. The Mizoroki-Heck (MH) reactions of various aryl halides with n-butyl acrylate were performed in the presence of complexes 2, 3 and 6. The new precatalysts showed high activity in the MH reactions giving good-to-excellent product yields with 0.1 mol-% pre-catalyst. The nature of the catalytically active species of 2, 3 and 6 was investigated by poisoning experiments with mercury and transmission electron microscopy. It was found that palladium nanoparticles formed from the precatalysts were involved in the catalytic process.
New sulphoxide modified resins were synthesized using poly(styrene-co-divinylbenzene) (PS-DVB) as matrix. Infrared spectroscopy and elemental analysis were used for characterisation. Solid-phase extraction of Pt-IV, Ru-III and Ru-IV from acidic chloride solutions was performed via batch experiments. Influence of spacer length between sulphoxide and matrix (ethylene, hexamethylene), substitution of sulphoxide (R-1: ethyl, hexyl, phenyl) and bead size of PS-DVB (spherical beads: d(50) < 155 mu m, d(50) < 80 mu m; powder: d(50) < 30 mu m) on adsorption was investigated subjected to acidity. Experimental results showed that ethyl substituted sulphoxide immobilised onto ground PS-DVB and hexamethylene spacer exhibited best adsorption properties. Different kinetic models and isotherms were fitted to the experimental data to identify extraction mechanism. Pt-IV was quantitative sorbed at [HCl] <= 0.1 mol/L whereas Ru-III and Ru-IV sorption ranged between 90% and 95% at [HCl] 5 mol/L. Desorption was reached using a solution of 0.5 M thiourea (Tu) in 0.1 M HCl at 90 degrees C. Separation of Pt-IV and Rum occurred at [HCl] <= 0.1 mol/L whereas Pt-IV was extracted and Ru-III remained in solution. A further separation was achieved by extracting Pt-IV and Ru-IV at 5 M HCl followed by sequential elution of Pt-IV with concentrated HCl and Ru-IV with 0.5 M Tu in 0.1 M HCl at 90 degrees C. 2014 Elsevier B.V. All rights reserved.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1-10 mM by measuring reversible fluorescence decay time changes.
The phenylidenepyridine (ppy) palladacycles [PdCl(ppy)(IMes)] (4) [IMes = 1,3-bis(mesityl) imidazol-2-ylidene] and [PdCl(ppy){(CN)(2)IMes}] (6) [(CN)(2)IMes = 4,5-dicyano-1,3-bis(mesityl) imidazol-2-ylidene] were prepared by facile two step syntheses, starting with the reaction of palladium(II) chloride with 2-phenylpyridine followed by subsequent addition of the NHC ligand to the precatalyst precursor [PdCl(ppy)](2). Suitable crystals for the X-ray analysis of the complexes 4 and 6 were obtained. It was shown that 6 has a shorter NHC-palladium bond than the IMes complex 4. The difference of the palladium carbene bond lengths based on the higher pi-acceptor strength of (CN)(2)IMes in comparison to IMes. Thus, (CN)(2)IMes should stabilize the catalytically active central palladium atom better than IMes. As a measure for the pi-acceptor strength of (CN)(2)IMes compared to IMes, the selone (CN)(2)IMes center dot Se (7) was prepared and characterized by Se-77-NMR spectroscopy. The pi-acceptor strength of 7 was illuminated by the shift of its Se-77-NMR signal. The Se-77-NMR signal of 7 was shifted to much higher frequencies than the Se-77-NMR signal of IMes center dot Se. Catalytic experiments using the Mizoroki-Heck reaction of aryl chlorides with n-butyl acrylate showed that 6 is the superior performer in comparison to 4. Using complex 6, an extensive substrate screening of 26 different aryl bromides with n-butyl acrylate was performed. Complex 6 is a suitable precatalyst for para-substituted aryl bromides. The catalytically active species was identified by mercury poisoning experiments to be palladium nanoparticles.
The new K+-selective fluorescent probes 1 and 2 were obtained by Cu-I-catalyzed 1,3-dipolar azide alkyne cycloaddition (CuAAC) reactions of an alkyne-substituted [1,3]dioxolo[4,5-f][1,3]benzodioxole (DBD) ester fluorophore with azido-functionalized N-phenylaza-18-crown-6 ether and N-(o-isopropoxy) phenylaza-18-crown-6 ether, respectively. Probes 1 and 2 allow the detection of K+ in the presence of Na+ in water by fluorescence enhancement (2.2 for 1 at 2000mm K+ and 2.5 for 2 at 160mm K+). Fluorescence lifetime measurements in the absence and presence of K+ revealed bi-exponential decay kinetics with similar lifetimes, however with different proportions changing the averaged fluorescence decay times ((f(av))). For 1 a decrease of (f(av)) from 12.4 to 9.3ns and for 2 an increase from 17.8 to 21.8ns was observed. Variation of the substituent in ortho position of the aniline unit of the N-phenylaza-18-crown-6 host permits the modulation of the K-d value for a certain K+ concentration. For example, substitution of H in 1 by the isopropoxy group (2) decreased the K-d value from >300mm to 10mm. 2 was chosen for studying the efflux of K+ from human red blood cells (RBC). Upon addition of the Ca2+ ionophor ionomycin to a RBC suspension in a buffer containing Ca2+, the fluorescence of 2 slightly rose within 10min, however, after 120min a significant increase was observed.
A desirable goal is to synthesize easily accessible and highly K+/Na+-selective fluoroionophores to monitor physiological K+ levels in vitro and in vivo. Therefore, highly K+/Na+-selective ionophores have to be developed. Herein, we obtained in a sequence of only four synthetic steps a set of K+-responsive fluorescent probes 4, 5 and 6. In a systematic study, we investigated the influence of the alkoxy substitution in ortho position of the aniline moiety in -conjugated aniline-1,2,3-triazole-coumarin-fluoroionophores 4, 5 and 6 [R=MeO (4), EtO (5) and iPrO (6)] towards the K+-complex stability and K+/Na+ selectivity. The highest K+-complex stability showed fluoroionophore 4 with a dissociation constant K-d of 19mm, but the K-d value increases to 31mm in combined K+/Na+ solutions, indicating a poor K+/Na+ selectivity. By contrast, 6 showed even in the presence of competitive Na+ ions equal K-d values (K-d(K+)=45mm and K-d(K+/Na+)=45mm) and equal K+-induced fluorescence enhancement factors (FEFs=2.3). Thus, the fluorescent probe 6 showed an outstanding K+/Na+ selectivity and is a suitable fluorescent tool to measure physiological K+ levels in the range of 10-80mm in vitro. Further, the isopropoxy-substituted N-phenylaza[18]crown-6 ionophore in 6 is a highly K+-selective building block with a feasible synthetic route.
The first heterodinuclear ruthenium(II) complexes of the 1,6,7,12-tetraazaperylene (tape) bridging ligand with iron(II), cobalt(II), and nickel(II) were synthesized and characterized. The metal coordination sphere in this complexes is filled by the tetradentate N,N-dimethyl-2,11-diaza[3.3](2,6)-pyridinophane (L-N4Me2) ligand, yielding complexes of the general formula [(L-N4Me2)Ru(mu-tape)M(L-N4Me2)](ClO4)(2)(PF6)(2) with M = Fe {[2](ClO4)(2)(PF6)(2)}, Co {[3](ClO4)(2)(PF6)(2)}, and Ni {[4](ClO4)(2)(PF6)(2)}. Furthermore, the heterodinuclear tape ruthenium(II) complexes with palladium(II)- and platinum(II)-dichloride [(bpy)(2)Ru(-tape)PdCl2](PF6)(2) {[5](PF6)(2)} and [(dmbpy)(2)Ru(-tape)PtCl2](PF6)(2) {[6](PF6)(2)}, respectively were also prepared. The molecular structures of the complex cations [2](4+) and [4](4+) were discussed on the basis of the X-ray structures of [2](ClO4)(4)MeCN and [4](ClO4)(4)MeCN. The electrochemical behavior and the UV/Vis absorption spectra of the heterodinuclear tape ruthenium(II) complexes were explored and compared with the data of the analogous mono- and homodinuclear ruthenium(II) complexes of the tape bridging ligand.
The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).
The complexes [(HgCl2)(2)((ch)(2)30S(4)O(6))] (1), [HgCl,(mn21S(2)O(5))] (2), [HgCl2(ch18S(2)O(4))] (3) and [HgI(meb12S(2)O(2))](2)[Hg2I6] (4) have been synthesized, characterized and their crystal structures were determined. In [(HgCl2)(2)((ch)(2)3OS(4)O(6))] two HgCl2 units are discretely bonded within the ligand cavity of the 30-membered dichinoxaline-tetrathia-30-crown-10 ((ch)(2)30S(4)O(6)) forming a binuclear complex. HgCl2 forms I : I "in-cavity" complexes with the 21-membered maleonitrile-dithia-21-crown-7(mn21S(2)O(5)) ligand and the 18-membered chinoxaline- dithia-18-crown-6 (ch18S(2)O(4)) ligand, respectively. The 12-membered 4-methyl-benzo-dithia-12-crown-4 (meb12S(2)O(2)) ligand gave with two equivalents HgI2 the compound [HgI(meb12S(2)O(2))](2)[Hg2I6]. In the cation [HgI(meb12S(2)O(2))](+) meb12S(2)O(2) forms with the cation HgI+ a half-sandwich complex
Electrospray ionization was employed to study the mass spectrometric behavior of the maleonitrile tetrathiacrown ethers mn12S(4) (1) and mn13S(4) (2) and maleonitrile pentathiacrown ether mn15S(5) (3) and of their complexes with various metal salts (MX2, M=Pd, Pt, Ni, Co, Fe; X=Cl, CrCl3, Ni(BF4)(2), TIPF6 or Cd(NO3)(2)) and Cu(SO3CF3)(2). Both singly charged, [MXL](+) and [MXL2]+, and doubly charged complexes, [MLn](2+) (n = 2-5), were observed. The formation of the different complexes consisting of the transition metal ion, the counterion and the various crown ethers and their subsequent dissociation was also studied by collision-induced dissociation measurements which were also used to evaluate the relative stabilities of the complexes. It was found that the collisional voltages for the dissociation of the complexes were generally greater in the [MXL](+) complexes than in the corresponding [MXL2]+ complexes. Copyright (c) 2006 John Wiley & Sons, Ltd
Homoleptic Ni-II and Fe-II complexes of the "large-surface" phenanthroline-type ligand 1,12-diazaperylene (dap), [Ni(dap)(3)](BF4)(2) (1) and [Fe(dap)(3)](PF6)(2) (2), respectively, were synthesized. In the crystal structure the complex cation [M(dap)(3)](2+) (M = Ni, Fe) exhibits C-3 symmetry and interacts with three other cations by pi-pi stacking. It forms a new metalla-supramolecular assembly with a honeycomb structure containing nanochannels running parallel to the crystallographic c axis. Aggregation by pi-pi stacking between metal complexes of "large-surface" ligands should give new perspectives for inorganic supramolecular chemistry.
Especially sulphur containing compounds are suitable for the separation of noble metals[ , ]. 1,2-Dithioethenes are weak chelate-forming ligands [ ]and in the case of bis(methylthio)maleonitrile[ ] the donor power of both of the sulphur atoms is further decreased by the electron withdrawing effect of the cyanogroups. Crowned dithiomaleonitrile are macrocyclic chelate ligands which extract Pd(II) at sufficient rate in a very good yields. The reason for that extraction behaviour is the fact that Pd(II) favours the square planar coordination geometry in opposite to the 3d- elements. The synthesis of the immobilized ligands proceeds from the 2-allyloxy-1,2-propanediol forming the dicarbon acid which is reduced to the diole. With the help of thionylchloride the dichloro compound is synthesized forming together with a dithiolate (1,2-disodium-1,2-dicyanethene-1,2-dithiolate, 1,2-disodium-4-methylbenzene-1,2-dithiolate [ ]) at high dilution conditions the macrocycle. Than the allysubstituted crown ether is sillylated and the resulting alkoxysilane is immobilised onto activated silca gel. The substituent forms in the same time a spacer should be modified in the future. By immobilisation at an inactive matrix the selectivity of the ligand should be applied for the accumulation of palladium from diluted solutions. The extraction was performed from nitric acid solution with a yield of 93% into a ligand solution (chloroform, kerosine). The extraction equilibrium is reached after 10 min. By atomic absorption spectroscopy the metal concentration in the aqueous phase was determined to calculate the extraction rate. By modification of the cavity of the macrocyclus the extraction rate increases from the acyclic compound through maleonitrile-dithio-21-crown-7, maleonitrile-dithio-15-crown-5 and maleonitrile-18-crown-6. The best results can be observed at the maleonitrile-dithio-12-crown-4. The rise of the function lg D= f(lg L) gives the composition of the extracted compounds as 1:1. The separation is unsatisfactory in the case of Ag(I), Hg(II), Pt(II), Tl (I) and the most 3d-elements. Also Ni(II) as a representative for the 3d-elements shows only separations coefficients of 1.43?103 . Summarizing, a very good separation of palladium from the examined elements can be specified. Additional to the extraction experiments, as well as the crystal structures and by UV spectroscopy the formation constants of selected chelates were determined. The observed order corresponds to that found by the extraction of palladium in the system water/chloroform. In the case of maleonitrile-dithio-15-crown-5 Ag(I) is endocyclic coordinated with all donor atoms of the macrocyclus. Already maleonitrile-dithio-18-crown-6 can include the silver cation into its greater cavity. In these cases a 1:1 complex is formed. A 1:2 sandwich structure was noticed only in the case of the smaller ligand maleonitrile- dithio-12-crown-4. Obviously, the formation of that structure is not favoured in the system water/chloroform from which can be explained the unfavourable extraction results.
The macrocyclic ring interconversion of four maleonitrile mixed oxadithia crown ethers of variable ring size, mn-12-S2O2, mn-15-S2O3, mn-18-S2O4 and fn-12-S2O2, were studied by 1H and 13C NMR spectroscopy and by molecular modelling. The barriers to ring interconversion were estimated using variable temperature NMR spectroscopy and from the calculated activation energies, together with the spin-lattice relaxation times of the CH2 carbon atoms, conclusions were drawn regarding the intramolecular flexibility of the crown ethers in both the free state as well as the complexed state incorporating either AgI, BiIII, SbIII, PdII or PtII metal cations. Furthermore, both the stoichiometry of the complexes and the coordination sites of the crown ethers to the various cations were also clearly implicated. Molecular modelling was also utilised to ascertain the preferred conformers of the four compounds and their corresponding complexes, the results of which corroborated the experimental NMR results to a high degree.