Refine
Has Fulltext
- no (5)
Year of publication
- 2007 (5) (remove)
Document Type
- Article (5)
Is part of the Bibliography
- yes (5)
Institute
Zerstörungsfreie Tomographie von Raumladungs- und Polarisationsverteilungen mittles Wärmepulsen
(2007)
Non-destructive, three-dimensional imaging of space-charge and polarization distributions in electret materials has been implemented by means of laser-induced thermal pulses. In pyroelectric films of poled poly(vinylidene fluoride), images of up to 45 x 45 pixels with a depth resolution of less than 0.5 mu m and a lateral resolution of 40 mu m were recorded, the latter being limited by fast thermal diffusion in the absorbing metallic front electrode. Initial applications include the analysis of polarization distributions in corona-poled piezoelectric sensor cables and the detection of patterned space-charge distributions in polytetrafluoroethylene films.
Polymer foams with electrically charged cellular voids, the so-called ferroelectrets, are soft piezoelectric transducer materials. Several polymers such as polyethylene terephthalate or cyclo-olefin copolymers are under investigation with respect to their suitability as ferroelectrets. Here, the authors report an additional ferroelectret polymer, cellular polyethylene-naphthalate (PEN), which was prepared from commercial uniform polymer films by means of foaming in supercritical carbon dioxide, inflation, biaxial stretching, electrical charging, and metallization. Piezoelectric d(33) coefficients of up to 140 pC/N demonstrate the suitability of such cellular PEN films for transducer applications. Their piezoelectricity is partially stable at elevated temperatures as high as 100 degrees C.
Electrically charged cellular polymer films can exhibit very high piezoelectric activity and are therefore more and more often employed in advanced electromechanical and electro-acoustical transducers. In this paper, we report an optimized sequence of steps for preparing such ferroelectrets from commercial nonvoided ploy(ethylene terephthalate) (PETP) films by means of foaming with CO2 biaxial mechanical stretching, controlled void inflation, and bipolar electric charging. The nonvoid PETP films foamed with supercritical CO2 at a suitably high pressure and subsequently annealed for stabilization. The cellular foam structure was further optimized by means of well controlled biaxial stretching in a commercial stretcher and sometimes subsequent inflamation in a pressure chamber. Bipolar electric charging of the internal voids was achieved through the application of high electric fields in an SF0 atmosphere. The new optimized PETP ferroelectric exhibit quite large piezoelectric coefficients up to almost 500 pCN(-1), for which unusually low elastic stiffness of only around 0.3 MPa are essential. The PETP foam ferroelectrics posses unclamped thickenss-extension resonance frequences between approximately 120 and 250 kHz, and are thus highly suitable for several established as well as novel ultrasonic-transductant applications.