Refine
Year of publication
- 2004 (208) (remove)
Document Type
- Article (166)
- Doctoral Thesis (29)
- Monograph/Edited Volume (6)
- Habilitation Thesis (4)
- Postprint (3)
Keywords
- Chaos (3)
- Synchronisation (3)
- 3D (2)
- Anisotropie (2)
- Biophysik (2)
- Displays (2)
- Ellipsometrie (2)
- Fluoreszenz (2)
- Kompensatoren (2)
- Photoalignment (2)
Institute
- Institut für Physik und Astronomie (208) (remove)
We investigate noise-controlled resonant response of active media to weak periodic forcing, both in excitable and oscillatory regimes. In the excitable regime, we find that noise-induced irregular wave structures can be reorganized into frequency-locked resonant patterns by weak signals with suitable frequencies. The resonance occurs due to a matching condition between the signal frequency and the noise-induced inherent time scale of the media. m:1 resonant regions similar to the Arnold tongues in frequency locking of self-sustained oscillatory media are observed. In the self-sustained oscillatory regime, noise also controls the oscillation frequency and reshapes significantly the Arnold tongues. The combination of noise and weak signal thus could provide an efficient tool to manipulate active extended systems in experiments
The optical, structural, and electrical properties of thin layers made from poly(3-hexylthiophene) (P3HT) samples of different molecular weights are presented. As reported in a previous paper by Kline et al., Adv. Mater 2003, 15, 1519, the mobilities of these layers are a strong function of the molecular weight, with the largest mobility found for the largest molecular weight. Atomic force microscopy studies reveal a complex polycrystalline morphology which changes considerably upon annealing. X-ray studies show the occurrence of a layered phase for all P3HT fractions, especially after annealing at 1.50 degreesC . However, there is no clear correlation between the differences in the transport properties and the data from structural investigations. In order to reveal the processes limiting the mobility in these layers, the transistor properties were investigated as a function of temperature. The mobility decreases continuously with increasing temperatures; with the same trend pronounced thermochromic effects of the P3HT films occur. Apparently, the polymer chains adopt a more twisted, disordered conformation at higher temperatures, leading to interchain transport barriers. We conclude that the backbone conformation of the majority of the bulk material rather than the crystallinity of the layer is the most crucial parameter controlling the charge transport in these P3HT layers. This interpretation is supported by the significant blue-shift of the solid-state absorption spectra with decreasing molecular weight, which is indicative of a larger distortion of the P3HT backbone in the low-molecular weight P3HT layers
A statistical model describing the propensity for protein aggregation is presented. Only amino-acid hydrophobicity values and calculated net charge are used for the model. The combined effects of hydrophobic patterns as computed by the signal analysis technique, recurrence quantification, plus calculated net charge were included in a function emphasizing the effect of singular hydrophobic patches which were found to be statistically significant for predicting aggregation propensity as quantified by fluorescence studies obtained from the literature. These results suggest preliminary evidence for a mesoscopic principle for protein folding/aggregation. (C) 2004 Elsevier B.V. All rights reserved
We investigate the effects of rotation on the behavior of the helium-burning shell source in accreting carbon- oxygen white dwarfs, in the context of the single degenerate Chandrasekhar mass progenitor scenario for type la supernovae (SNe Ia). We model the evolution of helium-accreting white dwarfs of initially 1 M-circle dot, assuming four different constant accretion rates (2, 3, 5 and 10 x 10(-7) M-circle dot/yr). In a one-dimensional approximation, we compute the mass accretion and subsequent nuclear fusion of helium into carbon and oxygen, as well as angular momentum accretion, angular momentum transport inside the white dwarf, and rotationally induced chemical mixing. Our models show two major effects of rotation: a) The helium-burning nuclear shell source in the rotating models is much more stable than in corresponding non-rotating models - which increases the likelihood that accreting white dwarfs reach the stage of central carbon ignition. This effect is mainly due to rotationally induced mixing at the CO/He interface which widens the shell source, and due to the centrifugal force lowering the density and degeneracy at the shell source location. b) The C/O-ratio in the layers which experience helium shell burning - which may affect the energy of an SN Ia explosion - is strongly decreased by the rotationally induced mixing of a-particles into the carbon-rich layers. We discuss implications of our results for the evolution of SNe la progenitors
Suppression of the keto-emission in polyfluorene light-emitting diodes : Experiments and models
(2004)
The spectral characteristics of polyfluorene (PF)-based light-emitting diodes (LEDs) containing a defined low concentration of either keto-defects or of the polymer poly(9.9-octylfuorene-co-benzothiadiazole) (F8BT) are preseneted. Both types of blend layers were tested in different device configurations with respect to the relative and absolute intensities of green blue emission components. It is shown that blending hole-transporting molecules into the emission layer at low concentration or incorporation of a suitable hole-transport layer reduces the green emission contribution in the electroluminescence (EL) spectrum of the PF:F8BT blend, which is similar to what is observed for the keto- containing PF layer. We conclude that the keto-defects in PF homopolymer layers mainly constitute weakly emissive electron traps, in agreement with the results of quantum-mechanical calculations
A commercially available Ir complex has been employed for the preparation of highly efficient (see Figure) single-layer phosphorescent polymer light,emitting diodes by use of appropriate thermal treatment and proper adjustment of the layer composition. These devices exhibit essentially no dependence of the driving field on the concentration of the Ir complex, suggesting that the build-up of space-charge in the layer is insignificant
We demonstrate efficient single-layer polymer phosphorescent light-emitting devices based on a green-emitting iridium complex and a polymer host co-doped with electron-transporting and hole-transporting molecules. These devices can be operated at relatively low voltages, resulting in a power conversion efficiency of up to 24 lm/W at luminous efficiencies exceeding 30 cd/A. The overall performances of these devices suggest that efficient electrophosphorescent devices with acceptable operating voltages can be achieved in very simple device structures fabricated by spin coating. (C) 2004 American Institute of Physics
It has been found in recent measurements that the singlet-to-triplet exciton ratio in organic light-emitting diodes (OLEDs) is larger than expected from spin degeneracy, and that singlet excitons form at a larger rate than triplets. We employed the technique of optically detected magnetic resonance to measure the spin-dependent exciton formation rates in films of a polymer and corresponding monomer, and explore the relation between the formation rates and the actual singlet-to-triplet ratio measured previously in OLEDs. We found that the spin-dependent exciton formation rates can indeed quantitatively explain the observed exciton yields, and that singlet formation rates and yields are significantly enhanced only in polymer OLEDs, but not in OLEDs made from the corresponding monomer
The correlations between the chemical structures of the 2,5-diphenyl-1,3,4-oxadiazole compounds and their corresponding vapour deposited film structures on Si/SiO2 were systematically investigated with AFM, XSR and IR for the first time. The result shows that the film structure depends strongly on the substrate temperature (Ts). For the compounds with ether bridge group, the film periodicity depends linearly on the length of the aliphatic chain. The films based on those oxadiazols have ordered structure in the investigated substrate temperature region, while die amide bridged compounds form ordered film only at high Ts due to the formation of intermolecular H-bond. The tilt angle of most molecules is determined by the pi-pi complexes between the molecules. The intermolecular interaction between head groups leads to the structural transformation during the thermal treatment after deposition. All the ether bridged oxadiazoles form films with bilayer structure, while amide bridged oxadiazole form film bilayer structure only when the molecule has a head group.
Various authors have investigated the problem of light deflection by radially moving gravitational lenses, but the results presented so far do not appear to agree on the expected deflection angles. Some publications claim a scaling of deflection angles with 1-v to first order in the radial lens velocity v, while others obtained a scaling with 1-2 v. In this paper we generalize the calculations for arbitrary lens velocities and show that the first result is the correct one. We discuss the seeming inconsistency of relativistic light deflection with the classical picture of moving test particles by generalizing the lens effect to test particles of arbitrary velocity, including light as a limiting case. We show that the effect of radial motion of the lens is very different for slowly moving test particles and light and that a critical test particle velocity exists for which the motion of the lens has no effect on the deflection angle to first order. An interesting and not immediately intuitive result is obtained in the limit of a highly relativistic motion of the lens towards the observer, where the deflection angle of light reduces to zero. This phenomenon is elucidated in terms of moving refractive media. Furthermore, we discuss the dragging of inertial frames in the field of a moving lens and the corresponding Lense-Thirring precession. in order to shed more light on the geometrical effects in the surroundings of a moving mass. In a second part we discuss the effect of transversal motion on the observed redshift of lensed sources. We demonstrate how a simple kinematic calculation explains the effects for arbitrary velocities of the lens and test particles. Additionally we include the transversal motion of the source and observer to show that all three velocities can be combined into an effective relative transversal velocity similar to the approach used in microlensing studies
B0218 + 357 is one of the most promising systems to determine the Hubble constant from time-delays in gravitational lenses. Consisting of two bright images, which are well resolved in very long baseline interferometry (VLBI) observations, plus one of the most richly structured Einstein rings, it potentially provides better constraints for the mass model than most other systems. The main problem left until now was the very poorly determined position of the lensing galaxy. After presenting detailed results from classical lens modelling, we apply our improved version of the LENSCLEAN algorithm which for the first time utilizes the beautiful Einstein ring for lens modelling purposes. The primary result using isothermal lens models is a now very well defined lens position of (255 +/- 6, 119 +/- 4) mas relative to the A image, which allows the first reliable measurement of the Hubble constant from the time-delay of this system. The result of H-0 = (78 +/- 6) km s(-1) Mpc(-1) (2sigma) is very high compared with other lenses. It is, however, compatible with local estimates from the Hubble Space Telescope (HST) key project and with WMAP results, but less prone to systematic errors. We furthermore discuss possible changes of these results for different radial mass profiles and find that the final values cannot be very different from the isothermal expectations. The power-law exponent of the potential is constrained by VLBI data of the compact images and the inner jet to be beta = 1.04 +/- 0.02, which confirms that the mass distribution is approximately isothermal (corresponding to beta = 1), but slightly shallower. The effect on H-0 is reduced from the expected 4 per cent decrease by an estimated shift of the best galaxy position of circa 4 mas to at most 2 per cent. Maps of the unlensed source plane produced from the best LENSCLEAN brightness model show a typical jet structure and allow us to identify the parts which are distorted by the lens to produce the radio ring. We also present a composite map which for the first time shows the rich structure of B0218 + 357 on scales ranging from mas to arcsec, both in the image plane and in the reconstructed source plane. Finally, we use a comparison of observations at different frequencies to investigate the question of possible weakening of one of the images by propagation effects and/or source shifts with frequency. The data clearly favour the model of significant 'extinction' without noticeable source position shifts. The technical details of our variant of the LENSCLEAN method are presented in the accompanying Paper I.
LensClean revisited
(2004)
We discuss the LENSCLEAN algorithm which for a given gravitational lens model fits a source brightness distribution to interferometric radio data in a similar way as standard CLEAN does in the unlensed case. The lens model parameters can then be varied in order to minimize the residuals and determine the best model for the lens mass distribution. Our variant of this method is improved in order to be useful and stable even for high dynamic range systems with nearly degenerated lens model parameters. Our test case B0218 + 357 is dominated by two bright images but the information needed to constrain the unknown parameters is provided only by the relatively smooth and weak Einstein ring. The new variant of LENSCLEAN is able to fit lens models even in this difficult case. In order to allow the use of general mass models with LENSCLEAN, we develop the new method LENTIL which inverts the lens equation much more reliably than any other method. This high reliability is essential for the use as part of LENSCLEAN. Finally a new method is developed to produce source plane maps of the unlensed source from the best LENSCLEAN brightness models. This method is based on the new concept of 'dirty beams' in the source plane. The application to the lens B0218 + 357 leads to the first useful constraints for the lens position and thus to a result for the Hubble constant. These results are presented in the accompanying Paper II, together with a discussion of classical lens modelling for this system
The quasar HE 0047-1756, at z = 1.67, is found to be split into two images 1."144 apart by an intervening galaxy acting as a gravitational lens. The flux ratio for the two components is roughly 3.5:1, depending slightly upon wavelength. The lensing galaxy is seen on images obtained in the i (800 nm) and K-s bands (2.1 mum); there is also a nearby faint object which may be responsible for some shear. The spectra of the two quasar images are nearly identical, but the emission line ratio between the two components scale differently from the continuum. Moreover, the fainter component has a bluer continuum slope than the brighter one. We argue that these small differences are probably due to microlensing. There is evidence for a partial Einstein ring emanating from the brighter image toward the fainter one
We present spatially resolved spectrophotometric observations of multiply imaged QSOs, using the Potsdam Multi- Aperture Spectrophotometer (PMAS), with the intention to search for spectral differences between components indicative of either microlensing or dust extinction. For the quadruple QSO HE 0435-1223 we find that the continuum shapes are indistinguishable, therefore differential extinction is negligible. The equivalent widths of the broad emission lines are however significantly different, and we argue that this is most likely due to microlensing. Contrariwise, the two components of the well-known object UM 673 have virtually identical emission line properties, but the continuum slopes differ significantly and indicate different dust extinction along both lines of sight
When exposed to sufficiently high electric fields, polymer-foam electret materials with closed cells exhibit ferroelectric-like behavior and may therefore be called ferroelectrets. In cellular ferroelectrets, the influence of the cell size and shape distributions on the application-relevant properties is not yet understood. Therefore, controlled inflation experiments were carried out on cellular polypropylene films, and the resulting elastical and electromechanical parameters were determined. The elastic modulus in the thickness direction shows a minimum with a corresponding maximum in the electromechanical transducer coefficient. The resonance frequency shifts as a function of the elastic modulus and the relative density of the inflated cellular films. Therefore, the transducer properties of cellular ferroelectrets can be optimized by means of controlled inflation. (C) 2004 American Institute of Physics
In cellular, electromechanically active polymer films, the so-called ferroelectrets, the cell size and shape distributions can be varied through a controlled inflation process. Up to now, high-pressure treatments were usually performed at elevated temperatures. There are, however, significant experimental limitations and complications if the pressure and temperature treatments are performed at the same time. Here, we demonstrate the controlled inflation of cellular polypropylene films by means of sepal-ate pressure and temperature treatments. Separate procedures are Much easier to implement. Excellent electromechanical properties were achieved with Such a two-step inflation process. The technique has significant potential for inflating large-area transducer films for electromechanical and electroacoustical applications
Piezo-, pyro- and ferroelectricity in poly (vinylidene fluoride-hexafluoropropylene) copolymer films
(2004)
Thin films of poly(vinylidene fluoride-hexafluoropropylene) P(VDF-HFP) show significant electroactive properties, such as piezoelectricity, pyroelectricity and electrostriction. Suitable polar P(VDF-HFP) copolymer films can be prepared by melt-pressing or solution-casting. Dipolar orientation causes the macroscopic polarization and thus also the symmetry breaking necessary for electroactive properties. We discuss the polarization build-up in thin, stretched and non-stretched, films of P(VDF-HFP) copolymer with a HFP content of 15%. Poling currents measured in-situ during electric poling are analyzed and the polarization is calculated. Suitable electric poling leads to hysteresis phenomena of the polarization as a function of the electric field as well as to significant polarization during switching experiments. Our results indicate dipolar orientation also in non-stretched P(VDF-HFP) films
Voided space-charge electrets : piezoelectric transducer materials for electro-acoustic applications
(2004)
Robotic telescopes & Doppler imaging : measuring differential rotation on long-period active stars
(2004)
The sun shows a wide variety of magnetic-activity related phenomena. The magnetic field responsible for this is generated by a dynamo process which is believed to operate in the tachocline, which is located at the bottom of the convection zone. This dynamo is driven in part by differential rotation and in part by magnetic turbulences in the convection zone. The surface differential rotation, one key ingredient of dynamo theory, can be measured by tracing sunspot positions.To extend the parameter space for dynamo theories, one can extend these measurements to other stars than the sun. The primary obstacle in this endeavor is the lack of resolved surface images on other stars. This can be overcome by the Doppler imaging technique, which uses the rotation-induced Doppler-broadening of spectral lines to compute the surface distribution of a physical parameter like temperature. To obtain the surface image of a star, high-resolution spectroscopic observations, evenly distributed over one stellar rotation period are needed. This turns out to be quite complicated for long period stars. The upcoming robotic observatory STELLA addresses this problem with a dedicated scheduling routine, which is tailored for Doppler imaging targets. This will make observations for Doppler imaging not only easier, but also more efficient.As a preview of what can be done with STELLA, we present results of a Doppler imaging study of seven stars, all of which show evidence for differential rotation, but unfortunately the errors are of the same order of magnitude as the measurements due to unsatisfactory data quality, something that will not happen on STELLA. Both, cross-correlation analysis and the sheared image technique where used to double check the results if possible. For four of these stars, weak anti-solar differential rotation was found in a sense that the pole rotates faster than the equator, for the other three stars weak differential rotation in the same direction as on the sun was found.Finally, these new measurements along with other published measurements of differential rotation using Doppler imaging, were analyzed for correlations with stellar evolution, binarity, and rotation period. The total sample of stars show a significant correlation with rotation period, but if separated into antisolar and solar type behavior, only the subsample showing anti-solar differential rotation shows this correlation. Additionally, there is evidence for binary stars showing less differential rotation as single stars, as is suggested by theory. All other parameter combinations fail to deliver any results due to the still small sample of stars available.