Refine
Year of publication
- 2018 (87) (remove)
Document Type
- Article (72)
- Postprint (8)
- Doctoral Thesis (3)
- Bachelor Thesis (1)
- Monograph/Edited Volume (1)
- Other (1)
- Review (1)
Is part of the Bibliography
- yes (87) (remove)
Keywords
- Climate change (2)
- Euglyphida (2)
- Europe (2)
- LiDAR (2)
- Maritime Alps (2)
- adaptation (2)
- biogenic silica (2)
- catchment (2)
- climate change (2)
- football (2)
Institute
- Institut für Umweltwissenschaften und Geographie (87) (remove)
While of higher plant origin, a specific source assignment of sedimentary leaf wax n-alkanes remains difficult. In addition, it is unknown how fast a changing catchment vegetation would be reflected in sedimentary leaf wax archives. In particular, for a quantitative interpretation of n-alkane C and H isotope ratios in terms of paleohydrological and paleoecological changes, a better understanding of transfer times and dominant sedimentary sources of leaf wax n-alkanes is required. In this study we tested to what extent compositional changes in leaf wax n-alkanes can be linked to known vegetation changes by comparison with high-resolution palynological data from the same archive. We analyzed leaf wax n-alkane concentrations and distributions in decadal resolution from a sedimentary record from Trzechowskie paleolake (TRZ, northern Poland), covering the Late Glacial to early Holocene (13 360-9940 yr BP). As an additional source indicator of targeted n-alkanes, compound-specific carbon isotopic data have been generated in lower time resolution. The results indicated rapid responses of n-alkane distribution patterns coinciding with major climatic and paleoecological transitions. We found a shift towards higher average chain length (ACL) values at the Allerod-Younger Dryas (YD) transition between 12 680 and 12 600 yr BP, co-evaled with a decreasing contribution of arboreal pollen (mainly Pinus and Betula) and a subsequently higher abundance of pollen derived from herbaceous plants (Poaceae, Cyperaceae, Artemisia), shrubs, and dwarf shrubs (Juniperus and Salix). The termination of the YD was characterized by a successive increase in n-alkane concentrations coinciding with a sharp decrease in ACL values between 11 580 and 11 490 yr BP, reflecting the expansion of woodland vegetation at the YD-Holocene transition. A gradual reversal to longer chain lengths after 11 200 yr BP, together with decreasing n-alkane concentrations, most likely reflects the early Holocene vegetation succession with a decline of Betula. These results show that n-alkane distributions reflect vegetation changes and that a fast (i.e., subdecadal) signal transfer occurred. However, our data also indicate that a standard interpretation of directional changes in biomarker ratios remains difficult. Instead, responses such as changes in ACL need to be discussed in the context of other proxy data. In addition, we find that organic geochemical data integrate different ecological information compared to pollen, since some gymnosperm genera, such as Pinus, produce only a very low amount of n-alkanes and for this reason their contribution may be largely absent from biomarker records. Our results demonstrate that a combination of palynological and n-alkane data can be used to infer the major sedimentary leaf wax sources and constrain leaf wax transport times from the plant source to the sedimentary sink and thus pave the way towards quantitative interpretation of compound-specific hydrogen isotope ratios for paleohydrological reconstructions.
Marine Isotope Stage 3 (MIS 3, 57-27 ka) was characterised by numerous rapid climate oscillations (i.e., Dansgaard-Oeschger (D/O-) events), which are reflected in various climate archives. So far, MIS 3 speleothem records from central Europe have mainly been restricted to caves located beneath temperate Alpine glaciers or close to the Atlantic Ocean. Thus, MIS 3 seemed to be too cold and dry to enable speleothem growth north of the Alps in central Europe. Here we present a new speleothem record from Bunker Cave, Germany, which shows two distinct growth phases from 52.0 (+0.8, -0.5) to 50.9 (+0.6, -1.3) ka and 473 (+1.0, -0.6) to 42.8 (+/- 0.9) ka, rejecting this hypothesis. These two growth phases potentially correspond to the two warmest and most humid phases in central Europe during MIS 3, which is confirmed by pollen data from the nearby Eifel. The hiatus separating the two phases is associated with Heinrich stadial 5 (HS 5), although the growth stop precedes the onset of HS 5. The first growth phase is characterised by a fast growth rate, and Mg concentrations and Sr isotope data suggest high infiltration and the presence of soil cover above the cave. The second growth phase was characterised by drier, but still favourable conditions for speleothem growth. During this phase, the delta C-13 values show a significant decrease associated with D/O-event 12. The timing of this shift is in agreement with other MIS 3 speleothem data from Europe and Greenland ice core data. (C) 2018 Elsevier Ltd. All rights reserved.
Active source near-vertical reflection (NVR) data from the interdisciplinary project TIPTEQ were used to image and identify structural and petrophysical properties within the Chilean subduction zone at 38.25 degrees S, where in 1960 the largest earthquake ever recorded (M-w 9.5) occurred. Reflection seismic images of the subduction zone were obtained using the post-stack depth migration technique to process the three components of the NVR data, allowing to present P- and S-stacked time sections and depth-migrated seismic reflection images. Next, the reflectivity method allowed to model traveltimes and amplitude ratios of pairs of reflections for two 1D profiles along the studied transect. The 1D seismic velocities that produced the synthetic seismograms with amplitudes and traveltimes that fit the observed ones were used to infer the rock composition of the different layers in each 1D profile. Finally, an image of the subduction zone is given. The Chilean subduction zone at 38.25 degrees S underlies a continental crust with highly reflective horizontal, as well as dipping events. Among them, the Lanalhue Fault Zone (LFZ), interpreted to be east-dipping, is imaged to very shallow depths for the first time. In terms of seismic velocities, the inferred composition of the continental crust is in agreement with field geology observations at the surface along the profile. Furthermore, no measurable amounts of fluids above the plate interface in the continental crust in this part of the Chilean subduction zone are necessary to explain the results. A large-scale anisotropy in the continental crust and upper mantle is qualitatively proposed. However, quantitative studies on this topic in the continental crust of the Chilean subduction zone at 38.25 degrees S do not exist to date.
Cool farm tool water
(2018)
The agricultural sector accounts for 70% of all water consumption and poses great pressure on ground water resources. Therefore, evaluating agricultural water consumption is highly important as it allows supply chain actors to identify practices which are associated with unsustainable water use, which risk depleting current water resources and impacting future production. However, these assessments are often not feasible for crop producers as data, models and experiments are required in order to conduct them. This work introduces a new on-line agricultural water use assessment tool that provides the water footprint and irrigation requirements at field scale based on an enhanced FAO56 approach combined with a global climate, crop and soil databases. This has been included in the Cool Farm Tool - an online tool which already provides metrics for greenhouse gas emissions and biodiversity impacts and therefore allows for a more holistic assessment of environmental sustainability in farming and agricultural supply chains. The model is tested against field scale and state level water footprint data providing good results. The tool provides a practical, reliable way to assess agricultural water use, and offers a means to engage growers and stakeholders in identifying efficient water management practices. (C) 2018 The Authors. Published by Elsevier Ltd.
Reviews and syntheses
(2018)
The cycling of carbon (C) between the Earth surface and the atmosphere is controlled by biological and abiotic processes that regulate C storage in biogeochemical compartments and release to the atmosphere. This partitioning is quantified using various forms of C-use efficiency (CUE) - the ratio of C remaining in a system to C entering that system. Biological CUE is the fraction of C taken up allocated to biosynthesis. In soils and sediments, C storage depends also on abiotic processes, so the term C-storage efficiency (CSE) can be used. Here we first review and reconcile CUE and CSE definitions proposed for autotrophic and heterotrophic organisms and communities, food webs, whole ecosystems and watersheds, and soils and sediments using a common mathematical framework. Second, we identify general CUE patterns; for example, the actual CUE increases with improving growth conditions, and apparent CUE decreases with increasing turnover. We then synthesize > 5000CUE estimates showing that CUE decreases with increasing biological and ecological organization - from uni-cellular to multicellular organisms and from individuals to ecosystems. We conclude that CUE is an emergent property of coupled biological-abiotic systems, and it should be regarded as a flexible and scale-dependent index of the capacity of a given system to effectively retain C.
Traditional drainage systems combining man-made channels and subsurface tile drains have been used since Roman times to control water excess in Mediterranean lowland regions, favouring adequate soil water regime for agriculture purposes. However, mechanization of agriculture, abandonment or land use changes lead to a progressive deterioration of these drains in the last decades. The effects of these structures on hydrological and sediment dynamics have been previously analyzed in a small Mediterranean lowland catchment (Can Revull, Mallorca, Spain, 1.4 km2) by establishing an integrated sediment budget with a multi-technique approach. Moreover, the recent advances in morphometric techniques enable the completion of this analysis by the accurate identification of active areas (i.e. sources, pathway links, and sinks) and improve the understanding of (de-)coupling mechanisms of water and sediment linkages. In this study, the Borselli's index of connectivity (IC; Cavalli et al. (2013)'s version) derived from a LiDAR-based high resolution DEM (>1 pt m−2; RMSE < 0.2 m) was used to evaluate the spatial patterns of sediment connectivity of the catchment under two different scenarios: (1) the current scenario, including an accurate representation of the 3800 m of artificial channels and levees (CS - Channelled Scenario), and (2) a hypothetical scenario in which these anthropogenic features were removed (US - Unchannelled Scenario). Design and configuration of the drainage system in Can Revull generated changes favouring lateral decoupling between different compartments, with hillslopes-floodplain and floodplain-channels relationships, showing a general decrease of IC values, and high longitudinal connectivity along the artificial channel network. Field observations corroborated these results: structures enabled rapid drainage of the water excess also promoting low surface runoff within the field crops, proving to be an effective management practice for erosion control in agricultural Mediterranean lowland catchments. By contrast, US demonstrated that the abandonment of the current agricultural practices and the subsequent destruction of the drainage system could lead the higher soil loss rates owning to more intense/effective processes of sediment connectivity.
We observe remarkably periodic patterns of seismicity rates and magnitudes at the Fimbul Ice Shelf, East Antarctica, correlating with the cycles of the ocean tide. Our analysis covers 19 years of continuous seismic recordings from Antarctic broadband stations. Seismicity commences abruptly during austral summer 2011 at a location near the ocean front in a shallow water region. Dozens of highly repetitive events occur in semi-diurnal cycles, with magnitudes and rates fluctuating steadily with the tide. In contrast to the common unpredictability of earthquake magnitudes, the event magnitudes show deterministic trends within single cycles and strong correlations with spring tides and tide height. The events occur quasi-periodically and the highly constrained event sources migrate landwards during rising tide. We show that a simple, mechanical model can explain most of the observations. Our model assumes stick-slip motion on a patch of grounded ice shelf, which is forced by the variations of the ocean-tide height and ice flow. The well fitted observations give new insights into the general process of frictional triggering of earthquakes, while providing independent evidence of variations in ice shelf thickness and grounding.
We study the rupture processes of Iquique earthquake M-w 8.1 (2014/04/01) and its largest aftershock M-w 7.7 (2014/04/03) that ruptured the North Chile subduction zone. High-rate Global Positioning System (GPS) recordings and strong motion data are used to reconstruct the evolution of the slip amplitude, rise time and rupture time of both earthquakes. A two-step inversion scheme is assumed, by first building prior models for both earthquakes from the inversion of the estimated static displacements and then, kinematic inversions in the frequency domain are carried out taken into account this prior information. The preferred model for the mainshock exhibits a seismic moment of 1.73 x 10(21) Nm (M-w 8.1) and maximum slip of similar to 9 m, while the aftershock model has a seismic moment of 3.88 x 10(20) (M-w 7.7) and a maximum slip of similar to 3 m. For both earthquakes, the final slip distributions show two asperities (a shallow one and a deep one) separated by an area with significant slip deficit. This suggests a segmentation along-dip which might be related to a change of the dipping angle of the subducting slab inferred from gravimetric data. Along-strike, the areas where the seismic ruptures stopped seem to be well correlated with geological features observed from geophysical information (high-resolution bathymetry, gravimetry and coupling maps) that are representative of the long-term segmentation of the subduction margin. Considering the spatially limited portions that were broken by these two earthquakes, our results support the idea that the seismic gap is not filled yet. (C) 2018 Elsevier B.V. All rights reserved.
Ferruginous (Fe-rich, SO4-poor) conditions are generally restricted to freshwater sediments on Earth today, but were likely widespread during the Archean and Proterozoic Eons. Lake Towuti, Indonesia, is a large ferruginous lake that likely hosts geochemical processes analogous to those that operated in the ferruginous Archean ocean. The metabolic potential of microbial communities and related biogeochemical cycling under such conditions remain largely unknown. We combined geochemical measurements (pore water chemistry, sulfate reduction rates) with metagenomics to link metabolic potential with geochemical processes in the upper 50 cm of sediment. Microbial diversity and quantities of genes for dissimilatory sulfate reduction (dsrAB) and methanogenesis (mcrA) decrease with increasing depth, as do rates of potential sulfate reduction. The presence of taxa affiliated with known iron- and sulfate-reducers implies potential use of ferric iron and sulfate as electron acceptors. Pore-water concentrations of acetate imply active production through fermentation. Fermentation likely provides substrates for respiration with iron and sulfate as electron donors and for methanogens that were detected throughout the core. The presence of ANME-1 16S and mcrA genes suggests potential for anaerobic methane oxidation. Overall our data suggest that microbial community metabolism in anoxic ferruginous sediments support coupled Fe, S and C biogeochemical cycling.
The Maghreb region (from Tunisia to Gibraltar) is a key area in the western Mediterranean to study the active tectonics and stress pattern across the Africa-Eurasia convergent plate boundary. In the present study, we compile comprehensive data set of well-constrained crustal stress indicators (from single focal mechanism solutions, formal inversion of focal mechanism solutions, and young geologic fault slip data) based on our and published data analyses. Stress inversion of focal mechanisms reveals a first-order transpression-compatible stress field and a second-order spatial variation of tectonic regime across the Maghreb region, with a relatively stable S-Hmax orientation from east to west. Therefore, the present-day active contraction of the western Africa-Eurasia plate boundary is accommodated by (1) E-W strike-slip faulting with reverse component along the Eastern Tell and Saharan-Tunisian Atlas, (2) a predominantly NE trending thrust faulting with strike-slip component in the Western Tell part, and (3) a conjugate strike-slip faulting regime with normal component in the Alboran/Rif domain. This spatial variation of the present-day stress field and faulting regime is relatively in agreement with the inferred stress information from neotectonic features. According to existing and newly proposed structural models, we highlight the role of main geometrically complex shear zones in the present-day stress pattern of the Maghreb region. Then, different geometries of these major inherited strike-slip faults and its related fractures (V-shaped conjugate fractures, horsetail splays faults, and Riedel fractures) impose their component on the second- and third-order stress regimes. Neotectonic and smoothed present-day stress map (mean S-Hmax orientation) reveal that plate boundary forces acting on the Africa-Eurasia collisional plates control the long wavelength of the stress field pattern in the Maghreb. The current tectonic deformations and the upper crustal stress field in the study area are governed by the interplay of the oblique plate convergence (i.e., Africa-Eurasia), lithosphere-mantle interaction, and preexisting tectonic weakness zones.