Refine
Has Fulltext
- yes (3)
Document Type
- Doctoral Thesis (3) (remove)
Is part of the Bibliography
- yes (3)
Keywords
- miniemulsion (3) (remove)
Institute
- Institut für Chemie (3) (remove)
Neue Einflüsse und Anwendungen von Mikrowellenstrahlung auf Miniemulsionen und ihre Kompositpolymere
(2004)
Miniemulsionen bestehen aus zwei miteinander nicht mischbaren Flüssigkeiten, von der die eine in Form kleiner Tröpfchen fein in der anderen verteilt (dispergiert) ist. Miniemulsionströpfchen sind mit Durchmessern von ungefähr 0,1 Mikrometer kleiner als herkömmliche Emulsionen und können u. a. als voneinander unabhängige Nanoreaktoren für chemische Reaktionen verwendet werden. Man unterteilt sie in direkte Miniemulsionen, in denen ein Öl in Wasser dispergiert ist, und inverse Miniemulsionen, in denen Wasser in Öl dispergiert wird. In dieser Arbeit wird das besondere chemische und physikalische Verhalten solcher Miniemulsionen unter dem Einfluß von Mikrowellenstrahlung untersucht. Dabei werden sowohl für Öl-in-Wasser als auch für Wasser-in-Öl-Miniemulsionen grundlagenwissenschaftliche Entdeckungen beschrieben und durch neue Modelle erklärt. Der praktische Nutzen dieser bislang unbeschriebenen Effekte wird durch ingenieurwissenschaftliche Anwendungsbeispiele im Bereich der Polymerchemie verdeutlicht. 1. Polymerisation mit "überlebenden Radikalen" (Surviving Radical Polymerization) Für die Herstellung von sog. Polymerlatizes (Kunststoffdispersionen, wie sie u. a. für Farben verwendet werden) aus direkten Styrol-in-Wasser Miniemulsionen werden die Styroltröpfchen als Nanoreaktoren verwendet: Sie werden mit Hilfe von Radikalen durch eine Kettenreaktion zu winzigen Polymerpartikeln umgesetzt, die im Wasser dispergiert sind. Ihre Materialeigenschaften hängen stark von der Kettenlänge der Polymermoleküle ab. In dieser Arbeit konnten durch den Einsatz von Mikrowellenstrahlung erstmals große Mengen an Radikalen erzeugt werden, die jeweils einzeln in Tröpfchen (Nanoreaktoren) auch noch lange Zeit nach dem Verlassen der Mikrowelle überleben und eine Polymerisationskettenreaktion ausführen können. Diese Methode ermöglicht nicht nur die Herstellung von Polymeren in technisch zuvor unerreichbaren Kettenlängen, mit ihr sind auch enorm hohe Umsätze nach sehr kurzen Verweilzeiten in der Mikrowelle möglich – denn die eigentliche Reaktion findet außerhalb statt. Es konnte gezeigt werden, dass durch Einsatz von Zusatzstoffen bei unvermindert hohem Umsatz die Polymerkettenlänge variiert werden kann. Die technischen Vorzüge dieses Verfahrens konnten in einer kontinuierlich betriebenen Pilotanlage nachgewiesen werden. 2. Aufheizverhalten inverser Miniemulsionen in Mikrowellenöfen Das Aufheizverhalen von Wasser-in-Öl Miniemulsionen mit kleinen Durchmessern durch Mikrowellen ist überaus träge, da sich nur das wenige Wasser in den Tröpfchen mit Mikrowellen aufheizen lässt, das Öl jedoch kaum. Solche Systeme verhalten sich gemäß der "Theorie des effektiven Mediums". Werden aber etwas größere Tröpfchen im Mikrometerbereich Mikrowellen ausgesetzt, so konnte eine wesentlich schnellere Aufheizung beobachtet werden, die auf eine Maxwell-Wagner-Grenzflächenpolarisation zurückgeführt werden kann. Die Größenabhängigkeit dieses Effekts wurde mit Hilfe der dielektrischen Spektroskopie quantifiziert und ist bislang in der Literatur nie beschrieben worden. Zur genauen Messung dieses Effekts und zu seiner technischen Nutzung wurde ein neuartiges Membranverfahren für die Herstellung von großen Miniemulsionströpfchen im Mikrometerbereich entwickelt. 3. Herstellung von Kompositpolymeren für Mikrowellenanwendungen Um die untersuchte Maxwell-Wagner-Grenzflächenpolarisation technisch nutzen zu können, wurden als dafür geeignete Materialien Kompositpolymere hergestellt. Das sind Kunststoffe, in denen winzige Wassertropfen oder Keramikpartikel eingeschlossen sind. Dazu wurden neuartige Synthesewege auf der Grundlage der Miniemulsionstechnik entwickelt. Ihr gemeinsames Ziel ist die Einschränkung der üblicherweise bei Polymerisation auftretenden Entmischung: In einem Verfahren wurde durch Gelierung die Beweglichkeit der emulgierten Wassertröpfchen eingeschränkt, in einem anderen wurde durch das Einschließen von Keramikpartikeln in Miniemulsionströpfchen die Entmischung auf deren Größe beschränkt. Anwendungen solcher Kompositpolymere könnten künstliche Muskeln, die Absorption von Radarstrahlung, z. B. für Tarnkappenflugzeuge, oder kratzfeste Lacke sein.Bei diesen Experimenten wurde beobachtet, daß sich u. U. in der Miniemulsion große Tröpfchen bilden. Ihr Ursprung wird mit einer neuen Modellvorstellung erklärt, die die Einflüsse auf die Stabilität von Miniemulsionen beschreibt.
The colloidal systems are present everywhere in many varieties such as emulsions (liquid droplets dispersed in liquid), aerosols (liquid dispersed in gas), foam (gas in liquid), etc. Among several new methods for the preparation of colloids, the so-called miniemulsion technique has been shown to be one of the most promising. Miniemulsions are defined as stable emulsions consisting of droplets with a size of 50-500 nm by shearing a system containing oil, water, a surfactant, and a highly water insoluble compound, the so-called hydrophobe 1. In the first part of this work, dynamic crystallization and melting experiments are described which were performed in small, stable and narrowly distributed nanodroplets (confined systems) of miniemulsions. Both regular and inverse systems were examined, characterizing, first, the crystallization of hexadecane, secondly, the crystallization of ice. It was shown for both cases that the temperature of crystallization in such droplets is significantly decreased (or the required undercooling is increased) as compared to the bulk material. This was attributed to a very effective suppression of heterogeneous nucleation. It was also found that the required undercooling depends on the nanodroplet size: with decreasing droplet size the undercooling increases. 2. It is shown that the temperature of crystallization of other n-alkanes in nanodroplets is also significantly decreased as compared to the bulk material due to a very effective suppression of heterogeneous nucleation. A very different behavior was detected between odd and even alkanes. In even alkanes, the confinement in small droplets changes the crystal structure from a triclinic (as seen in bulk) to an orthorhombic structure, which is attributed to finite size effects inside the droplets. An intermediate metastable rotator phase is of less relevance for the miniemulsion droplets than in the bulk. For odd alkanes, only a strong temperature shift compared to the bulk system is observed, but no structure change. A triclinic structure is formed both in bulk and in miniemulsion droplets. 3. In the next part of the thesis it is shown how miniemulsions could be successfully applied in the development of materials with potential application in pharmaceutical and medical fields. The production of cross-linked gelatin nanoparticles is feasible. Starting from an inverse miniemulsion, the softness of the particles can be controlled by varying the initial concentration, amount of cross-link agent, time of cross-linking, among other parameters. Such particles show a thermo-reversible effect, e.g. the particles swell in water above 37 °C and shrink below this temperature. Above 37 °C the chains loose the physical cross-linking, however the particles do not loose their integrity, because of the chemical cross-linking. Those particles have potential use as drug carriers, since gelatin is a natural polymer derived from collagen. 4. The cross-linked gelatin nanoparticles have been used for the biomineralization of hydroxyapatite (HAP), a biomineral, which is the major constituent of our bones. The biomineralization of HAP crystals within the gelatin nanoparticles results in a hybrid material, which has potential use as a bone repair material. 5. In the last part of this work we have shown that layers of conjugated semiconducting polymers can be deposited from aqueous dispersion prepared by the miniemulsion process. Dispersions of particles of different conjugated semiconducting polymers such as a ladder-type poly(para-phenylene) and several soluble derivatives of polyfluorene could be prepared with well-controlled particle sizes ranging between 70 - 250 nm. Layers of polymer blends were prepared with controlled lateral dimensions of phase separation on sub-micrometer scales, utilizing either a mixture of single component nanoparticles or nanoparticles containing two polymers. From the results of energy transfer it is demonstrated that blending two polymers in the same particle leads to a higher efficiency due to the better contact between the polymers. Such an effect is of great interest for the fabrication of opto-electronic devices such as light emitting diodes with nanometer size emitting points and solar cells comprising of blends of electron donating and electron accepting polymers.
Combining the magnetic properties of a given material with the tremendous advantages of colloids can exponentially increase the advantages of both systems. This thesis deals with the field of magnetic nanotechnology. Thus, the design and characterization of new magnetic colloids with fascinating properties compared with the bulk materials is presented. Ferrofluids are referred to either as water or organic stable dispersions of superparamagnetic nanoparticles which respond to the application of an external magnetic field but lose their magnetization in the absence of a magnetic field. In the first part of this thesis, a three-step synthesis for the fabrication of a novel water-based ferrofluid is presented. The encapsulation of high amounts of magnetite into polystyrene particles can efficiently be achieved by a new process including two miniemulsion processes. The ferrofluids consist of novel magnetite polystyrene nanoparticles dispersed in water which are obtained by three-step process including coprecipitation of magnetite, its hydrophobization and further surfactant coating to enable the redispersion in water and the posterior encapsulation into polystyrene by miniemulsion polymerization. It is a desire to take advantage of a potential thermodynamic control for the design of nanoparticles, and the concept of "nanoreactors" where the essential ingredients for the formation of the nanoparticles are already in the beginning. The formulation and application of polymer particles and hybrid particles composed of polymeric and magnetic material is of high interest for biomedical applications. Ferrofluids can for instance be used in medicine for cancer therapy and magnetic resonance imaging. Superparamagnetic or paramagnetic colloids containing iron or gadolinium are also used as magnetic resonance imaging contrast agent, for example as a important tool in the diagnosis of cancer, since they enhance the relaxation of the water of the neighbouring zones. New nanostructured composites by the thermal decomposition of iron pentacarbonyl in the monomer phase and thereafter the formation of paramagnetic nanocomposites by miniemulsion polymerization are discussed in the second part of this thesis. In order to obtain the confined paramagnetic nanocomposites a two-step process was used. In the first step, the thermal decomposition of the iron pentacarbonyl was obtained in the monomer phase using oleic acid as stabilizer. In the second step, this iron-containing monomer dispersion was used for making a miniemulsion polymerization thereof. The addition of lanthanide complexes to ester-containing monomers such as butyl acrylate and subsequent polymerization leading to the spontaneous formation of highly organized layered nanocomposites is presented in the final part of this thesis. By an one-step miniemulsion process, the formation of a lamellar structure within the polymer nanoparticles is achieved. The magnetization and the NMR relaxation measurements have shown these new layered nanocomposites to be very apt for application as contrast agent in magnetic resonance imaging.