Refine
Document Type
- Doctoral Thesis (5)
- Article (2)
- Postprint (1)
Language
- English (8)
Is part of the Bibliography
- yes (8) (remove)
Keywords
- enzyme (8) (remove)
Institute
Electron transfer (ET) reactions play a crucial role in the metabolic pathways of all organisms. In biotechnological approaches, the redox properties of the protein cytochrome c (cyt c), which acts as an electron shuttle in the respiratory chain, was utilized to engineer ET chains on electrode surfaces. With the help of the biopolymer DNA, the redox protein assembles into electro active multilayer (ML) systems, providing a biocompatible matrix for the entrapment of proteins.
In this study the characteristics of the cyt c and DNA interaction were defined on the molecular level for the first time and the binding sites of DNA on cyt c were identified. Persistent cyt c/DNA complexes were formed in solution under the assembly conditions of ML architectures, i.e. pH 5.0 and low ionic strength. At pH 7.0, no agglomerates were formed, permitting the characterization of the NMR spectroscopy. Using transverse relaxation-optimized spectroscopy (TROSY)-heteronuclear single quantum coherence (HSQC) experiments, DNAs’ binding sites on the protein were identified. In particular, negatively charged AA residues, which are known interaction sites in cyt c/protein binding were identified as the main contact points of cyt c and DNA.
Moreover, the sophisticated task of arranging proteins on electrode surfaces to create functional ET chains was addressed. Therefore, two different enzyme types, the flavin dependent fructose dehydrogenase (FDH) and the pyrroloquinoline quinone dependent glucose dehydrogenase (PQQ-GDH), were tested as reaction partners of freely diffusing cyt c and cyt c immobilized on electrodes in mono- and MLs. The characterisation of the ET processes was performed by means of electrochemistry and the protein deposition was monitored by microgravimetric measurements. FDH and PQQ-GDH were found to be generally suitable for combination with the cyt c/DNA ML system, since both enzymes interact with cyt c in solution and in the immobilized state. The immobilization of FDH and cyt c was achieved with the enzyme on top of a cyt c monolayer electrode without the help of a polyelectrolyte. Combining FDH with the cyt c/DNA ML system did not succeed, yet. However, the basic conditions for this protein-protein interaction were defined. PQQ-GDH was successfully coupled with the ML system, demonstrating that that the cyt c/DNA ML system provides a suitable interface for enzymes and that the creation of signal chains, based on the idea of co-immobilized proteins is feasible.
Future work may be directed to the investigation of cyt c/DNA interaction under the precise conditions of ML assembly. Therefore, solid state NMR or X-ray crystallography may be required. Based on the results of this study, the combination of FDH with the ML system should be addressed. Moreover, alternative types of enzymes may be tested as catalytic component of the ML assembly, aiming on the development of innovative biosensor applications.
Climate change, driven by increasing atmospheric levels of carbon dioxide (CO2), presents a significant societal challenge for the 21st century. Biotechnological approaches for microbial production of commodity chemicals and fuels offer possible solutions to re-fix CO2 from the atmosphere, thereby mitigating carbon emissions and contributing to a sustainable carbon-economy in the future. Biological CO2 fixation is also at the heart of agricultural productivity, where photosynthesis and the Calvin-Benson-Bassham cycle present promising biotechnological targets for crop improvement.
Synthetic biology allows testing metabolic solutions not known to exist in nature, which may exceed their natural counterparts in terms of efficiency. In this thesis, I explore the design of such new-to-nature metabolic pathways for biological CO2 utilization and their implementation in living cells (in vivo).
In the first chapter, I describe the development of a metabolic pathway that enables intracellular conversion of CO2 to formate, giving access to highly efficient carbon fixation routes. In nature, CO2-reduction remains restricted to anaerobic organisms and low redox potentials. Here, we introduce the “CORE cycle”, a synthetic metabolic pathway that converts CO2 to formate under fully aerobic conditions and ambient CO2 levels, using only NADPH as a reductant. We leverage this synthetic, ATP-energized pathway to overcome the thermodynamic and kinetic barriers associated with CO2-reduction. Applying rational metabolic engineering and adaptive evolution, this work demonstrates that Escherichia coli can utilize ambient CO2 as the sole source of one-carbon units and serine, achieving a first step towards novel modes of synthetic autotrophy. We further apply computational modeling to showcase the potential of the CORE cycle as a photorespiratory bypass for enhancing photosynthesis.
In the second chapter, I describe the development of the “LCM module”, a novel metabolic route for CO2-incorporating conversion of acetyl-CoA to pyruvate. This route relies on the newly uncovered, promiscuous activity of an adenosylcobalamin (B12)-dependent enzyme, which we significantly optimize through targeted hypermutation and in vivo selection strategies. The LCM module provides a shorter and more efficient pathway for acetyl-CoA assimilation compared to natural routes, offering novel opportunities for synthetic CO2 fixation.
Overall, through theoretical pathway analysis, enzyme bioprospecting, and modular metabolic engineering in E. coli, this thesis expands the solution space for biological CO2 fixation.
Development of electrochemical antibody-based and enzymatic assays for mycotoxin analysis in food
(2023)
Electrochemical methods are promising to meet the demand for easy-to-use devices monitoring key parameters in the food industry. Many companies run own lab procedures for mycotoxin analysis, but it is a major goal to simplify the analysis. The enzyme-linked immunosorbent assay using horseradish peroxidase as enzymatic label, together with 3,3',5,5' tetramethylbenzidine (TMB)/H2O2 as substrates allows sensitive mycotoxin detection with optical detection methods. For the miniaturization of the detection step, an electrochemical system for mycotoxin analysis was developed. To this end, the electrochemical detection of TMB was studied by cyclic voltammetry on different screen-printed electrodes (carbon and gold) and at different pH values (pH 1 and pH 4). A stable electrode reaction, which is the basis for the further construction of the electrochemical detection system, could be achieved at pH 1 on gold electrodes. An amperometric detection method for oxidized TMB, using a custom-made flow cell for screen-printed electrodes, was established and applied for a competitive magnetic bead-based immunoassay for the mycotoxin ochratoxin A. A limit of detection of 150 pM (60 ng/L) could be obtained and the results were verified with optical detection. The applicability of the magnetic bead-based immunoassay was tested in spiked beer using a handheld potentiostat connected via Bluetooth to a smartphone for amperometric detection allowing to quantify ochratoxin A down to 1.2 nM (0.5 µg/L).
Based on the developed electrochemical detection system for TMB, the applicability of the approach was demonstrated with a magnetic bead-based immunoassay for the ergot alkaloid, ergometrine. Under optimized assay conditions a limit of detection of 3 nM (1 µg/L) was achieved and in spiked rye flour samples ergometrine levels in a range from 25 to 250 µg/kg could be quantified. All results were verified with optical detection. The developed electrochemical detection method for TMB gives great promise for the detection of TMB in many other HRP-based assays.
A new sensing approach, based on an enzymatic electrochemical detection system for the mycotoxin fumonisin B1 was established using an Aspergillus niger fumonisin amine oxidase (AnFAO). AnFAO was produced recombinantly in E. coli as maltose-binding protein fusion protein and catalyzes the oxidative deamination of fumonisins, producing hydrogen peroxide. It was found that AnFAO has a high storage and temperature stability. The enzyme was coupled covalently to magnetic particles, and the enzymatically produced H2O2 in the reaction with fumonisin B1 was detected amperometrically in a flow injection system using Prussian blue/carbon electrodes and the custom-made wall-jet flow cell. Fumonisin B1 could be quantified down to 1.5 µM (≈ 1 mg/L). The developed system represents a new approach to detect mycotoxins using enzymes and electrochemical methods.
Iron-sulfur clusters are essential enzyme cofactors. The most common and stable clusters are [2Fe-2S] and [4Fe-4S] that are found in nature. They are involved in crucial biological processes like respiration, gene regulation, protein translation, replication and DNA repair in prokaryotes and eukaryotes. In Escherichia coli, Fe-S clusters are essential for molybdenum cofactor (Moco) biosynthesis, which is a ubiquitous and highly conserved pathway. The first step of Moco biosynthesis is catalyzed by the MoaA protein to produce cyclic pyranopterin monophosphate (cPMP) from 5’GTP. MoaA is a [4Fe-4S] cluster containing radical S-adenosyl-L-methionine (SAM) enzyme. The focus of this study was to investigate Fe-S cluster insertion into MoaA under nitrate and TMAO respiratory conditions using E. coli as a model organism. Nitrate and TMAO respiration usually occur under anaerobic conditions, where oxygen is depleted. Under these conditions, E. coli uses nitrate and TMAO as terminal electron. Previous studies revealed that Fe-S cluster insertion is performed by Fe-S cluster carrier proteins. In E. coli, these proteins are known as A-type carrier proteins (ATC) by phylogenomic and genetic studies. So far, three of them have been characterized in detail in E. coli, namely IscA, SufA, and ErpA. This study shows that ErpA and IscA are involved in Fe-S cluster insertion into MoaA under nitrate and TMAO respiratory conditions. ErpA and IscA can partially replace each other in their role to provide [4Fe-4S] clusters for MoaA. SufA is not able to replace the functions of IscA or ErpA under nitrate respiratory conditions.
Nitrate reductase is a molybdoenzyme that coordinates Moco and Fe-S clusters. Under nitrate respiratory conditions, the expression of nitrate reductase is significantly increased in E. coli. Nitrate reductase is encoded in narGHJI genes, the expression of which is regulated by the transcriptional regulator, fumarate and nitrate reduction (FNR). The activation of FNR under conditions of nitrate respiration requires one [4Fe-4S] cluster. In this part of the study, we analyzed the insertion of Fe-S cluster into FNR for the expression of narGHJI genes in E. coli. The results indicate that ErpA is essential for the FNR-dependent expression of the narGHJI genes, a role that can be replaced partially by IscA and SufA when they are produced sufficiently under the conditions tested. This observation suggests that ErpA is indirectly regulating nitrate reductase expression via inserting Fe-S clusters into FNR.
Most molybdoenzymes are complex multi-subunit and multi-cofactor-containing enzymes that coordinate Fe-S clusters, which are functioning as electron transfer chains for catalysis. In E. coli, periplasmic aldehyde oxidoreductase (PaoAC) is a heterotrimeric molybdoenzyme that
consists of flavin, two [2Fe-2S], one [4Fe-4S] cluster and Moco. In the last part of this study, we investigated the insertion of Fe-S clusters into E. coli periplasmic aldehyde oxidoreductase (PaoAC). The results show that SufA and ErpA are involved in inserting [4Fe-4S] and [2Fe-2S] clusters into PaoABC, respectively under aerobic respiratory conditions.
Synthesis of artificial building blocks for sortase-mediated ligation and their enzymatic linkage
(2018)
The enzyme Sortase A catalyzes the formation of a peptide bond between the recognition sequence LPXTG and an oligoglycine. While manifold ligations between proteins and various biomolecules, proteins and small synthetic molecules as well as proteins and surfaces have been reported, the aim of this thesis was to investigate the sortase-catalyzed linkage between artificial building blocks. Hence, this could pave the way for the use of sortase A for tasks from a chemical point of view and maybe even materials science.
For the proof of concept, the studied systems were kept as simple as possible at first by choosing easily accessible silica NPs and commercially available polymers. These building blocks were functionalized with peptide motifs for sortase-mediated ligation. Silica nanoparticles were synthesized with diameters of 60 and 200 nm and surface modified with C=C functionalities. Then, peptides bearing a terminal cysteine were covalently linked by means of a thiol-ene reaction. 60 nm SiO2 NPs were functionalized with pentaglycines, while peptides with LPETG motif were linked to 200 nm silica particles. Polyethyleneglycol (PEG) and poly(N isopropylacrylamide) (PNIPAM) were likewise functionalized with peptides by thiol-ene reaction between cysteine residues and C=C units in the polymer end groups. Hence, G5-PEG and PNIPAM-LPETG conjugates were obtained. With this set of building blocks, NP–polymer hybrids, NP–NP, and polymer–polymer structures were generated by sortase-mediated ligation and the product formation shown by transmission electron microscopy, MALDI-ToF mass spectrometry and dynamic light scatting, among others. Thus, the linkage of these artificial building blocks by the enzyme sortase A could be demonstrated.
However, when using commercially available polymers, the purification of the polymer–peptide conjugates was impossible and resulted in a mixture containing unmodified polymer. Therefore, strategies were developed for the own synthesis of pure peptide-polymer and polymer-peptide conjugates as building blocks for sortase-mediated ligation. The designed routes are based on preparing polymer blocks via RAFT polymerization from CTAs that are attached to N- or C-terminus, respectively, of a peptide. GG-PNIPAM was synthesized through attachment of a suitable RAFT CTA to Fmoc-GG in an esterification reaction, followed by polymerization of NIPAM and cleavage of the Fmoc protection group. Furthermore, several peptides were synthesized by solid-phase peptide synthesis. The linkage of a RAFT CTA (or
polymerization initiator) to the N-terminus of a peptide can be conducted in an automated fashion as last step in a peptide synthesizer. The synthesis of such a conjugate couldn’t be realized in the time frame of this thesis, but many promising strategies exist to continue this strategy using different coupling reagents. Such polymer building blocks can be used to synthesize protein-polymer conjugates catalyzed by sortase A and the approach can be carried on to the synthesis of block copolymers by using polymer blocks with peptide motifs on both ends.
Although the proof of concept demonstrated in this thesis only shows examples that can be also synthesized by exclusively chemical techniques, a toolbox of such building blocks will enable the future formation of new materials and pave the way for the application of enzymes in materials science. In addition to nanoparticle systems and block copolymers, this also includes combination with protein-based building blocks to form hybrid materials. Hence, sortase could become an enzymatic tool that complements established chemical linking technologies and provides specific peptide motifs that are orthogonal to all existing chemical functional groups.
Enzyme degradable polymersomes from chitosan-g-[poly-l-lysine-block-epsilon-caprolactone] copolymer
(2020)
The scope of this study includes the synthesis of chitosan-g-[peptide-poly-epsilon-caprolactone] and its self-assembly into polymeric vesicles employing the solvent shift method. In this way, well-defined core-shell structures suitable for encapsulation of drugs are generated. The hydrophobic polycaprolactone side-chain and the hydrophilic chitosan backbone are linked via an enzyme-cleavable peptide. The synthetic route involves the functionalization of chitosan with maleimide groups and the preparation of polycaprolactone with alkyne end-groups. A peptide functionalized with a thiol group on one side and an azide group on the other side is prepared. Thiol-ene click-chemistry and azide-alkyne Huisgen cycloaddition are then used to link the chitosan and poly-epsilon-caprolactone chains, respectively, with this peptide. For a preliminary study, poly-l-lysin is a readily available and cleavable peptide that is introduced to investigate the feasibility of the system. The size and shape of the polymersomes are studied by dynamic light scattering and cryo-scanning electron microscopy. Furthermore, degradability is studied by incubating the polymersomes with two enzymes, trypsin and chitosanase. A dispersion of polymersomes is used to coat titanium plates and to further test the stability against enzymatic degradation.
Enzyme degradable polymersomes from chitosan-g-[poly-l-lysine-block-epsilon-caprolactone] copolymer
(2020)
The scope of this study includes the synthesis of chitosan-g-[peptide-poly-epsilon-caprolactone] and its self-assembly into polymeric vesicles employing the solvent shift method. In this way, well-defined core-shell structures suitable for encapsulation of drugs are generated. The hydrophobic polycaprolactone side-chain and the hydrophilic chitosan backbone are linked via an enzyme-cleavable peptide. The synthetic route involves the functionalization of chitosan with maleimide groups and the preparation of polycaprolactone with alkyne end-groups. A peptide functionalized with a thiol group on one side and an azide group on the other side is prepared. Thiol-ene click-chemistry and azide-alkyne Huisgen cycloaddition are then used to link the chitosan and poly-epsilon-caprolactone chains, respectively, with this peptide. For a preliminary study, poly-l-lysin is a readily available and cleavable peptide that is introduced to investigate the feasibility of the system. The size and shape of the polymersomes are studied by dynamic light scattering and cryo-scanning electron microscopy. Furthermore, degradability is studied by incubating the polymersomes with two enzymes, trypsin and chitosanase. A dispersion of polymersomes is used to coat titanium plates and to further test the stability against enzymatic degradation.
Enzymes can support the synthesis or degradation of biomacromolecules in natural processes. Here, we demonstrate that enzymes can induce a macroscopic-directed movement of microstructured hydrogels following a mechanism that we call a "Jack-in-the-box" effect. The material's design is based on the formation of internal stresses induced by a deformation load on an architectured microscale, which are kinetically frozen by the generation of polyester locking domains, similar to a Jack-in-thebox toy (i.e., a compressed spring stabilized by a closed box lid). To induce the controlled macroscopic movement, the locking domains are equipped with enzyme-specific cleavable bonds (i.e., a box with a lock and key system). As a result of enzymatic reaction, a transformed shape is achieved by the release of internal stresses. There is an increase in entropy in combination with a swelling-supported stretching of polymer chains within the microarchitectured hydrogel (i.e., the encased clown pops-up with a pre-stressed movement when the box is unlocked). This utilization of an enzyme as a physiological stimulus may offer new approaches to create interactive and enzyme-specific materials for different applications such as an optical indicator of the enzyme's presence or actuators and sensors in biotechnology and in fermentation processes.