Refine
Has Fulltext
- no (108)
Year of publication
Document Type
- Article (108) (remove)
Is part of the Bibliography
- yes (108)
Keywords
- Langmuir monolayer (2)
- Oligo(epsilon-caprolactone) (2)
- ellipsometry (2)
- polyesterurethanes (2)
- spectroscopic ellipsometry (2)
- stem cell adhesion (2)
- 1,3,4-oxadiazole (1)
- 3,4-Propylenedioxythiophene (1)
- 3D electrode structures (1)
- AFM (1)
- Bioelectrocatalysis (1)
- Brewster angle microscopy (1)
- Carbon fiber (1)
- Conjugated polymeric thin film (1)
- Crystallization (1)
- Diphenyl-1,3,4-oxadiazole (1)
- Diphenyl-oxadiazoles (1)
- Direct electron transfer (1)
- EIS (1)
- Electroactive Conjugated Polymer (1)
- Electrochemical impedance spectroscopy (1)
- Enzymatic degradation (1)
- Enzymatic polymer degradation (1)
- Fluorescence quantum yield (1)
- HTHP (1)
- Immobilization (1)
- Langmuir layers (1)
- Langmuir monolayer degradation technique (1)
- Langmuir technique (1)
- Langmuir-Schaefer method (1)
- Langmuir-Schafer films (1)
- Multiblock copolymer (1)
- Multiwalled carbon nanotube (1)
- Nanohybrid (1)
- Nanostructure (1)
- OLED (1)
- Oligo(omega-pentadecalactone) (1)
- Optical properties (1)
- PBD (1)
- PQQ-GDH (1)
- PQQ-dependent glucose dehydrogenase (1)
- Packing motif (1)
- Polymer architecture (1)
- Polymeric substrate (1)
- Poylaniline (1)
- Sulfonated polyaniline (1)
- X-ray structure (1)
- acetylcholinesterase (1)
- basement membrane (1)
- bioelectrochemistry (1)
- biomimetic sensors (1)
- brewster angle microscopy (1)
- cell adhesion (1)
- cell culture (1)
- chemical oxidative polymerization (1)
- collagen-IV (1)
- conductive polymer (1)
- cross-linking (1)
- crystal structure (1)
- crystallization (1)
- direct bioelectrocatalysis (1)
- ellipsometric mapping (1)
- enzyme bioelectrocatalysis (1)
- fibronectin (1)
- hydrogen bonds (1)
- induced pluripotent stem cells (1)
- langmuir monolayer (1)
- macroITO (1)
- macroporous ITO electrodes (1)
- molecular conformation (1)
- molecularly imprinted electropolymers (1)
- morphology (1)
- pH-dependent electrochemistry (1)
- particle morphology (1)
- peripheral anionic site (1)
- poly(epsilon-caprolactone) (1)
- poly[(rac-lactide)-co-glycolide] (1)
- polyester (1)
- polypyrrole (1)
- propidium (1)
- protein (1)
- protein adsorption (1)
- root mean square roughness (1)
- sulfonated polyanilines (1)
- surface coating (1)
- two dimensional network (1)
- xanthine dehydrogenase (1)
A series of multiblock copolymers (PDLCL) synthesized from oligo(omega-pentadecalactone) diol (OPDL) and oligo(epsilon-caprolactone) diol (OCL), which are linked by 2,2(4), 4-trimethyl-hexamethylene diisocyanate (TMDI), is investigated by the Langmuir monolayer technique at the air-water interface. Brewster angle microscopy (BAM) and spectroscopic ellipsometry are employed to characterize the polymer film morphologies in situ. PDLCL containing >= 40 wt% OCL segments form homogeneous Langmuir monofilms after spreading. The film elasticity modulus decreases with increasing amounts of OPDL segments in the copolymer. In contrast, the OCL-free polyesterurethane OPDL-TMDI cannot be spread to monomolecular films on the water surface properly, and movable slabs are observed by BAM even at low surface pressures. The results of the in situ morphological characterization clearly show that essential information concerning the reliability of Langmuir monolayer degradation (LMD) experiments cannot be obtained from the evaluation of the pi-A isotherms only. Consequently, in situ morphological characterization turns out to be indispensable for characterization of Langmuir layers before LMD experiments.
Prerequisite for the rational design of functional organic materials with tailor-made electronic properties is the knowledge of the structure-property relationship for the specific class of molecules under consideration. This encouraged us to systematically study the influence of the molecular structure and substitution pattern of aromatically substituted 1,3,4-oxadiazoles on the electronic properties and packing motifs of these molecules and on the interplay of these factors. For this purpose, seven diphenyl-oxadiazoles equipped with methyl substituents in the ortho- and meta-position(s) were synthesized and characterized. Absorption and fluorescence spectra in solution served here as tools to monitor substitution-induced changes in the electronic properties of the individual molecules whereas X-ray and optical measurements in the solid state provided information on the interplay of electronic and packing effects. In solution, the spectral position of the absorption maximum, the size of Stokes shift, and the fluorescence quantum yield are considerably affected by ortho-substitution in three or four ortho-positions. This results in blue shifted absorption bands, increased Stokes shifts, and reduced fluorescence quantum yields whereas the spectral position and vibrational structure of the emission bands remain more or less unaffected. In the crystalline state, however, the spectral position and shape of the emission bands display a strong dependence on the molecular structure and/or packing motifs that seem to control the amount of dye-dye-interactions. These observations reveal the limited value of commonly reported absorption and fluorescence measurements in solution for a straightforward comparison of spectroscopic results with single X-ray crystallography. This underlines the importance of solid state spectroscopic studies for a better understanding of the interplay of electronic effects and molecular order.
The selaginella genome identifies genetic changes associated with the evolution of vascular plants
(2011)
Vascular plants appeared similar to 410 million years ago, then diverged into several lineages of which only two survive: the euphyllophytes (ferns and seed plants) and the lycophytes. We report here the genome sequence of the lycophyte Selaginella moellendorffii (Selaginella), the first nonseed vascular plant genome reported. By comparing gene content in evolutionarily diverse taxa, we found that the transition from a gametophyte- to a sporophyte-dominated life cycle required far fewer new genes than the transition from a nonseed vascular to a flowering plant, whereas secondary metabolic genes expanded extensively and in parallel in the lycophyte and angiosperm lineages. Selaginella differs in posttranscriptional gene regulation, including small RNA regulation of repetitive elements, an absence of the trans-acting small interfering RNA pathway, and extensive RNA editing of organellar genes.
We use substituted polyanilines for the construction of new polymer electrodes for interaction studies with the redox protein cytochrome c (cyt c) and the enzyme sulfite oxidase (SO). For these purposes four different polyaniline copolymers are chemically synthesized. Three of them are copolymers, containing 2-methoxyaniline-5-sulfonic acid with variable ratios of aniline; the fourth copolymer consists of 3-amino-benzoic acid and aniline. The results show that all polymers are suitable for being immobilized as thin stable films on gold wire and indium tin oxide (ITO) electrode surfaces from DMSO solution. This can be demonstrated by cyclic voltammetry and UV-Vis spectroscopy measurements. Moreover, cyt c can be electrochemically detected not only in solution, but also immobilized on top of the polymer films. Furthermore, the appearance of a significant catalytic current has been demonstrated for the sulfonated polyanilines, when the polymer-coated protein electrode is being measured upon addition of sulfite oxidase, confirming the establishment of a bioanalytical signal chain. Best results have been obtained for the polymer with highest sulfonation grade. The redox switching of the polymer by the enzymatic reaction can also be analyzed by following the spectral properties of the polymer electrode.
The electropolymerization of 3,4-(2,2-dibutylpropylenedioxy)thiophene (ProDOT-Bu-2) onto single carbon fiber microelectrode (SCFME) was conducted in acetonitrile (ACN) containing sodium perchlorate (NaClO4) as electrolyte and investigated by cyclic voltammetry (CV). The nanostructured films of poly[3,4-(2,2-dibutyl-propyleneclioxy)thiophene] (PProDOT-Bu-2) which were depositing showed complete reversible redox behavior in monomer-free electrolyte solution.
The capacitive behavior of the films was investigated by electrochemical impedance spectroscopy (EIS) at applied potentials from 0.1 V to 1.3 V. The analysis by equivalent circuit modeling revealed an applied potential around 0.4V to be most suitable for the system PProDOT-Bu-2/SCFME as a double layer supercapacitor component inducing a double layer capacitance C-d, value of 62 mFcm(-2).
The new 3,4-propylenedioxythiophenes (ProDOT) bearing hydroxy- or chloro-functionalized side chains of varying length and polarity were synthesized and electropolymerized on single carbon fiber microelectrode (SCFME) using cyclo-voltammetry. Electrochemical impedance spectroscopy (EIS) revealed highest capacitance values for the hydroxy-functionalized Poly 5 carrying a side chain of medium length. The EIS data were fitted with an equivalent electrical circuit giving a good correlation. AFM analysis of the topography showed higher roughness values for Poly 5 than for the two other polymers bearing longer side chains. Due to their reactive end groups the polymers should be useful for post-polymerization functionalization of the electrode surface.
The class of 2,5 disubstituted-1,3,4-oxadiazoles containing a biphenyl unit on one side is intensively used as electron transport materials to enhance the performance of organic light emitting diodes (OLEDs). In contrast to the ongoing research on these materials insights in their structure-property relationships are still incomplete. To overcome the structural tentativeness and ambiguities the crystal structures of 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole, that of the related compound 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole and of 2-(4-biphenylyl)-5-(2,6-dimethylphenyl)-1,3,4-oxadiazole are determined. A comparison with the results of GAUSSIAN03 calculations and similar compounds in the Cambridge Structural Database leads to a profound characterization.
Sulfonated polyanilines have become promising building blocks in the construction of biosensors, and therefore we use here differently substituted polymer forms to investigate the role of their structural composition and properties in achieving a direct electron transfer with the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). To this end, new copolymers containing different ratios of 2-methoxyaniline-5-sulfonic acid (MAS), 3-aminobenzenesulfonic acid (ABS) and 3-aminobenzoic acid (AB) units have been chemically synthesized. All polymers have been studied with respect to their ability to react directly with PQQ-GDH. This interaction has been monitored initially in solution, and subsequently on electrode surfaces. The results show that only copolymers with MAS and aniline units can directly react with PQQ-GDH in solution; the background can be mainly ascribed to the emeraldine salt redox state of the polymer, allowing rather easy reduction. However, when polymers and the enzyme are immobilized on the surface of carbon nanotube-containing electrodes, direct bioelectrocatalysis is also feasible in the case of copolymers composed of ABS/AB and MAS/AB units, existing initially in pernigraniline base form. This verifies that a productive interaction of the enzyme with differently substituted polymers is feasible when the electrode potential can be used to drive the reaction towards the oxidation of the substrate-reduced enzyme. These results clearly demonstrate that enzyme electrodes based on sulfonated polyanilines and direct bioelectrocatalysis can be successfully constructed.
Aspects of morphology control during the oxidative synthesis of electrically conducting polymers
(2009)
The formation of micro- and nanostructures during the oxidative polymerization of polypyrrole and polyaniline is investigated using different sulfonic acid dopants. Rod- or tube-like structures are found in polypyrrole as well as in polyaniline without addition of further compounds to the initial reaction mixture of monomer, dopant and oxidant. In these cases, always a crystalline precursor complex composed of a dopand molecule and the pure monomer (aniline) or a trimeric moiety (pyrrole) serves as in-situ template. In most cases the surface of the growing polymer is covered by secondary structures with much smaller sizes so that a hierarchical order of structures at different length scales results. Corresponding model considerations for the polymerization process are outlined. Additionally, unusual structures like platelets, frames, rings, or ribbons are observed in the polypyrrole synthesis in the presence of fluorosurfactants.
Electrocoating of 2,2 dibutylpropylene dioxythiophene on carbon fiber microelectrodes (CFMEs) in different electrolytes in acetonitrile was performed, and surface morphology and electrochemical impedance spectroscopic investigation has been carried out. Impedance spectra showed the typical form of Z(IM) versus Z(RE) for transmission- line at frequencies 10 Hz, with transition to almost pure capacitive behaviour down to 10 mHz (the lower limit of frequency scan).
Results of a high pressure x-ray study of 2,5-di(4-pyridyl)-1,3,4-oxadiazole up to 2.5 GPa are presented and discussed. Parameters for the Murnaghan equation of state are derived. The bulk modulus amounts to K-0 = 4.6 +/- 0.3 GPa and its pressure derivative to K-0' = 7.4 +/- 0.6. These values are comparable to values of other diphenyl-1,3,4- oxadiazoles. The anisotropy of the compression is analysed using the strain tensor and discussed based on the anisotropy of the intermolecular interactions
Study of crosslinking process in fluorinated poly(imide-amide)s containing pendant cyano groups
(1994)