Refine
Has Fulltext
- yes (2)
Document Type
- Doctoral Thesis (2) (remove)
Language
- German (2)
Is part of the Bibliography
- yes (2)
Keywords
- Membran (2) (remove)
Institute
- Institut für Chemie (2) (remove)
Neue Einflüsse und Anwendungen von Mikrowellenstrahlung auf Miniemulsionen und ihre Kompositpolymere
(2004)
Miniemulsionen bestehen aus zwei miteinander nicht mischbaren Flüssigkeiten, von der die eine in Form kleiner Tröpfchen fein in der anderen verteilt (dispergiert) ist. Miniemulsionströpfchen sind mit Durchmessern von ungefähr 0,1 Mikrometer kleiner als herkömmliche Emulsionen und können u. a. als voneinander unabhängige Nanoreaktoren für chemische Reaktionen verwendet werden. Man unterteilt sie in direkte Miniemulsionen, in denen ein Öl in Wasser dispergiert ist, und inverse Miniemulsionen, in denen Wasser in Öl dispergiert wird. In dieser Arbeit wird das besondere chemische und physikalische Verhalten solcher Miniemulsionen unter dem Einfluß von Mikrowellenstrahlung untersucht. Dabei werden sowohl für Öl-in-Wasser als auch für Wasser-in-Öl-Miniemulsionen grundlagenwissenschaftliche Entdeckungen beschrieben und durch neue Modelle erklärt. Der praktische Nutzen dieser bislang unbeschriebenen Effekte wird durch ingenieurwissenschaftliche Anwendungsbeispiele im Bereich der Polymerchemie verdeutlicht. 1. Polymerisation mit "überlebenden Radikalen" (Surviving Radical Polymerization) Für die Herstellung von sog. Polymerlatizes (Kunststoffdispersionen, wie sie u. a. für Farben verwendet werden) aus direkten Styrol-in-Wasser Miniemulsionen werden die Styroltröpfchen als Nanoreaktoren verwendet: Sie werden mit Hilfe von Radikalen durch eine Kettenreaktion zu winzigen Polymerpartikeln umgesetzt, die im Wasser dispergiert sind. Ihre Materialeigenschaften hängen stark von der Kettenlänge der Polymermoleküle ab. In dieser Arbeit konnten durch den Einsatz von Mikrowellenstrahlung erstmals große Mengen an Radikalen erzeugt werden, die jeweils einzeln in Tröpfchen (Nanoreaktoren) auch noch lange Zeit nach dem Verlassen der Mikrowelle überleben und eine Polymerisationskettenreaktion ausführen können. Diese Methode ermöglicht nicht nur die Herstellung von Polymeren in technisch zuvor unerreichbaren Kettenlängen, mit ihr sind auch enorm hohe Umsätze nach sehr kurzen Verweilzeiten in der Mikrowelle möglich – denn die eigentliche Reaktion findet außerhalb statt. Es konnte gezeigt werden, dass durch Einsatz von Zusatzstoffen bei unvermindert hohem Umsatz die Polymerkettenlänge variiert werden kann. Die technischen Vorzüge dieses Verfahrens konnten in einer kontinuierlich betriebenen Pilotanlage nachgewiesen werden. 2. Aufheizverhalten inverser Miniemulsionen in Mikrowellenöfen Das Aufheizverhalen von Wasser-in-Öl Miniemulsionen mit kleinen Durchmessern durch Mikrowellen ist überaus träge, da sich nur das wenige Wasser in den Tröpfchen mit Mikrowellen aufheizen lässt, das Öl jedoch kaum. Solche Systeme verhalten sich gemäß der "Theorie des effektiven Mediums". Werden aber etwas größere Tröpfchen im Mikrometerbereich Mikrowellen ausgesetzt, so konnte eine wesentlich schnellere Aufheizung beobachtet werden, die auf eine Maxwell-Wagner-Grenzflächenpolarisation zurückgeführt werden kann. Die Größenabhängigkeit dieses Effekts wurde mit Hilfe der dielektrischen Spektroskopie quantifiziert und ist bislang in der Literatur nie beschrieben worden. Zur genauen Messung dieses Effekts und zu seiner technischen Nutzung wurde ein neuartiges Membranverfahren für die Herstellung von großen Miniemulsionströpfchen im Mikrometerbereich entwickelt. 3. Herstellung von Kompositpolymeren für Mikrowellenanwendungen Um die untersuchte Maxwell-Wagner-Grenzflächenpolarisation technisch nutzen zu können, wurden als dafür geeignete Materialien Kompositpolymere hergestellt. Das sind Kunststoffe, in denen winzige Wassertropfen oder Keramikpartikel eingeschlossen sind. Dazu wurden neuartige Synthesewege auf der Grundlage der Miniemulsionstechnik entwickelt. Ihr gemeinsames Ziel ist die Einschränkung der üblicherweise bei Polymerisation auftretenden Entmischung: In einem Verfahren wurde durch Gelierung die Beweglichkeit der emulgierten Wassertröpfchen eingeschränkt, in einem anderen wurde durch das Einschließen von Keramikpartikeln in Miniemulsionströpfchen die Entmischung auf deren Größe beschränkt. Anwendungen solcher Kompositpolymere könnten künstliche Muskeln, die Absorption von Radarstrahlung, z. B. für Tarnkappenflugzeuge, oder kratzfeste Lacke sein.Bei diesen Experimenten wurde beobachtet, daß sich u. U. in der Miniemulsion große Tröpfchen bilden. Ihr Ursprung wird mit einer neuen Modellvorstellung erklärt, die die Einflüsse auf die Stabilität von Miniemulsionen beschreibt.
In der vorliegenden Arbeit wird die Herstellung und Charakterisierung von Mixed-Matrix-Membranen (MMM) für die Gastrennung thematisiert. Dazu wurden verschiedene Füllstoffe genutzt, um in Verbindung mit dem Membranmaterial Polysulfon MMMs herzustellen. Als Füllstoffe wurden 3 aktive und 2 passive Füllstoffe verwendet. Die aktiven Füllstoffe besaßen Porenöffnungen, die in der Lage sind Gase in Abhängigkeit der Molekülgröße zu trennen. Daraus folgt ein höherer idealer Trennfaktor für bestimmte Gaspaare als in Polysulfon selbst. Aufgrund der durch die Poren gebildeten permanenten Kanäle in den aktiven Füllstoffen ergibt sich ein schnellerer Gastransport (Permeabilität) als in Polysulfon. Es handelte sich bei den aktiven Füllstoffen um den Zeolith SAPO-34 und 2 Chargen eines Zeolitic Imidazolate Framework (ZIF) ZIF-8. Die beiden Chargen ZIF-8 unterschieden sich in ihrer spezifischen Oberfläche, was diesen Einfluss speziell in die Untersuchungen zum Gastransport einbeziehen sollte. Bei den passiven Füllstoffen handelte es sich um ein aminofunktionalisiertes Kieselgel und unporöse (dichte) Glaskügelchen. Das Kieselgel besaß Poren, die zu groß waren, um Gase effektiv zu trennen. Die Glaskügelchen konnten keine Gastrennung ermöglichen, da sie keine Poren besaßen.
Aus der Literatur ist bekannt, dass die Einbettung von Füllstoffen oft zu Defekten in MMMs führt. Ein Ziel dieser Arbeit war es daher die Einbettung zu optimieren. Weiterhin sollte der Gastransport in MMMs dieser Arbeit mit dem in einer unbeladenen Polysulfonmembran verglichen werden. Aufgrund des selektiveren Trennverhaltens der aktiven Füllstoffe im Vergleich zum Membranmaterial, sollte mit der Einbettung aktiver Füllstoffe die Trennleistung der MMMs mit steigender Füllstoffbeladung immer weiter verbessert werden.
Um die Eigenschaften der MMMs zu untersuchen, wurden diese mittels Rasterelektronenmikroskop (REM), Gaspermeationsmessungen (GP) und Thermogravimetrischer Analyse gekoppelt mit Massenspektrometrie (TGA-MS) charakterisiert.
Untersuchungen am REM konnten eine Verbesserung der Einbettung zeigen, wenn ein polymerer Haftvermittler verwendet wurde. Verglichen wurde die optimierte Einbettung mit der Einbettung ohne Haftvermittler und Ergebnissen aus der Literatur, in der die Verwendung verschiedener Silane als Haftvermittler beschrieben wurde. Trotz der verbesserten Einbettung konnte lediglich bei geringen Beladungen an Füllstoff (10 und 20 Ma-% bezogen auf das Membranmaterial) eine geringe Steigerung des idealen Trennfaktors in den MMMs gegenüber der unbeladenen Polysulfonmembranen beobachtet werden. Bei höheren Füllstoffbeladungen (30, 40 und 50 Ma-%) war ein deutlicher Anstieg der Permeabilität bei stark sinkendem idealen Trennfaktor zu beobachten. Mit Hilfe von TGA-MS Messungen konnte darüber hinaus festgestellt werden, dass der verwendete Zeolith SAPO-34 durch Wassermoleküle blockierte Porenöffnungen besaß. Das verhinderte den Gastransport im Füllstoff, wodurch die Trennleistung des Füllstoffes nicht ausgenutzt werden konnte. Die Füllstoffe ZIF-8 (chargenunabhängig) und aminofunktionalisiertes Kieselgel wiesen keine blockierten Poren auf. Dennoch zeigte sich in diesen MMMs keine Verbesserung der Gastrenn- oder Gastransporteigenschaften. MMMs mit dichten Glaskügelchen als Füllstoff zeigten dasselbe Gastrenn- und Gastransportverhalten, wie alle MMMs mit den zuvor genannten Füllstoffen.
In dieser Arbeit konnte, trotz optimierter Einbettung anorganischer Füllstoffe, für MMMs keine Verbesserung der Gastrenn- oder Gastransporteigenschaften nachgewiesen werden. Vielmehr wurde ein Einfluss der Füllstoffmenge auf die Gastransporteigenschaften in MMMs festgestellt. Die Änderungen der MMMs gegenüber Polysulfon stammen von den Folgen der Einbettung von Füllstoffen in das Matrixpolymer. Durch die Einbettung werden die Eigenschaften des Matrixpolymers ändern, sodass auch der Gastransport beeinflusst wird. Des Weiteren wurde dokumentiert, dass in Abhängigkeit der Füllstoffbeladung die entstehende Membranstruktur beeinflusst wird. Die Beeinflussung war dabei unabhängig von der Füllstoffart. Es wurde eine Korrelation zwischen Füllstoffmenge und veränderter Membranstruktur gefunden.