Refine
Has Fulltext
- no (24) (remove)
Year of publication
- 2004 (24) (remove)
Document Type
- Article (24)
Is part of the Bibliography
- yes (24)
We investigate noise-controlled resonant response of active media to weak periodic forcing, both in excitable and oscillatory regimes. In the excitable regime, we find that noise-induced irregular wave structures can be reorganized into frequency-locked resonant patterns by weak signals with suitable frequencies. The resonance occurs due to a matching condition between the signal frequency and the noise-induced inherent time scale of the media. m:1 resonant regions similar to the Arnold tongues in frequency locking of self-sustained oscillatory media are observed. In the self-sustained oscillatory regime, noise also controls the oscillation frequency and reshapes significantly the Arnold tongues. The combination of noise and weak signal thus could provide an efficient tool to manipulate active extended systems in experiments
In the last decade, there has been an increasing interest in compensating thermally induced errors to improve the manufacturing accuracy of modular tool systems. These modular tool systems are interfaces between spindle and workpiece and consist of several complicatedly formed parts. Their thermal behavior is dominated by nonlinearities, delay and hysteresis effects even in tools with simpler geometry and it is difficult to describe it theoretically. Due to the dominant nonlinear nature of this behavior the so far used linear regression between the temperatures and the displacements is insufficient. Therefore, in this study we test the hypothesis whether we can reliably predict such thermal displacements via nonlinear temperature-displacement regression functions. These functions are estimated firstly from learning measurements using the alternating conditional expectation (ACE) algorithm and then tested on independent data sets. First, we analyze data that were generated by a finite element spindle model. We find that our approach is a powerful tool to describe the relation between temperatures and displacements for simulated data. Next, we analyze the temperature-displacement relationship in a silent real experimental setup, where the tool system is thermally forced. Again, the ACE-algorithm is powerful to estimate the deformation with high precision. The corresponding errors obtained by using the nonlinear regression approach are 10-fold lower in comparison to multiple linear regression analysis. Finally, we investigate the thermal behavior of a modular tool system in a working milling machine and get again promising results. The thermally inducedaccuracy using this nonlinear regression analysis. Therefore, this approach seems to be very useful for the development of new modular tool systems. errors can be estimated with 1-2 micrometer
In the last decade, there has been an increasing interest in compensating thermally induced errors to improve the manufacturing accuracy of modular tool systems. These modular tool systems are interfaces between spindle and workpiece and consist of several complicatedly formed parts. Their thermal behavior is dominated by nonlinearities, delay and hysteresis effects even in tools with simpler geometry and it is difficult to describe it theoretically. Due to the dominant nonlinear nature of this behavior the so far used linear regression between the temperatures and the displacements is insufficient. Therefore, in this study we test the hypothesis whether we can reliably predict such thermal displacements via nonlinear temperature-displacement regression functions. These functions are estimated firstly from learning measurements using the alternating conditional expectation (ACE) algorithm and then tested on independent data sets. First, we analyze data that were generated by a finite element spindle model. We find that our approach is a powerful tool to describe the relation between temperatures and displacements for simulated data. Next, we analyze the temperature-displacement relationship in a silent real experimental setup, where the tool system is thermally forced. Again, the ACE-algorithm is powerful to estimate the deformation with high precision. The corresponding errors obtained by using the nonlinear regression approach are 10-fold lower in comparison to multiple linear regression analysis. Finally, we investigate the thermal behavior of a modular tool system in a working milling machine and get again promising results. The thermally induced errors can be estimated with 1-2${mu m}$ accuracy using this nonlinear regression analysis. Therefore, this approach seems to be very useful for the development of new modular tool systems.
We review the problem of estimating parameters and unobserved trajectory components from noisy time series measurements of continuous nonlinear dynamical systems. It is first shown that in parameter estimation techniques that do not take the measurement errors explicitly into account, like regression approaches, noisy measurements can produce inaccurate parameter estimates. Another problem is that for chaotic systems the cost functions that have to be minimized to estimate states and parameters are so complex that common optimization routines may fail. We show that the inclusion of information about the time-continuous nature of the underlying trajectories can improve parameter estimation considerably. Two approaches, which take into account both the errors-in-variables problem and the problem of complex cost functions, are described in detail: shooting approaches and recursive estimation techniques. Both are demonstrated on numerical examples
An approach is presented for the reconstruction of phase synchronization phenomena in a chaotic CO2 laser from experimental data. We analyze this laser system in a regime able to phase synchronize with a weak sinusoidal forcing. Our technique recovers the synchronization diagram of the experimental system from only few measurement data sets, thus allowing the prediction of the regime of phase synchronization as well as nonsynchronization in a broad parameter space of forcing frequency and amplitude without further experiments
Fourier surrogate data are artificially generated time series, that - based on a resampling scheme - share the linear properties with an observed time series. In this paper we study a statistical surrogate hypothesis test to detect deviations from a linear Gaussian process with respect to asymmetry in time (Q-statistic). We apply this test to a Fourier representable function and obtain a representation of the asymmetry in time of the sample data, a characteristic for nonlinear processes, and the significance in terms of the Fourier coefficients. The main outcome is that we calculate the expected value of the mean and the standard deviation of the asymmetries of the surrogate data analytically and hence, no surrogates have to be generated. To illustrate the results we apply our method to the saw tooth function, the Lorenz system and to measured X-ray data of Cygnus X-1
In this paper we show that two dynamical invariants, the second order Renyi entropy and the correlation dimension, can be estimated from recurrence plots (RPs) with arbitrary embedding dimension and delay. This fact is interesting as these quantities are even invariant if no embedding is used. This is an important advantage of RPs compared to other techniques of nonlinear data analysis. These estimates for the correlation dimension and entropy are robust and, moreover, can be obtained at a low numerical cost. We exemplify our results for the Rossler system, the funnel attractor and the Mackey-Glass system. In the last part of the paper we estimate dynamical invariants for data from some fluid dynamical experiments and confirm previous evidence for low dimensional chaos in this experimental system. (C) 2004 American Institute of Physics
Recurrence plots have recently been recognized as a powerful tool for the analysis of data. Not only the visualization of structures of the time series but also the possibility to estimate invariants from them and the possibility to analyze non-stationary data sets are remarkable. However, the question of how much information is encoded in such a two-dimensional and binary representation has not been discussed so far. In this Letter we show that-under some conditions-it is possible to reconstruct an attractor from the recurrence plot, at least topologically. This means that all relevant dynamical information is contained in the plot. (C) 2004 Elsevier B.V. All rights reserved