Refine
Has Fulltext
- no (6)
Year of publication
- 2011 (6) (remove)
Document Type
- Article (6)
Language
- English (6)
Is part of the Bibliography
- yes (6)
Institute
Using scattering scanning nearfield infrared microscopy (s-SNIM), we have imaged the nanoscale phase separation of mixed polystyrene-poly(methyl methacrylate) (PS-PMMA) brushes and investigated changes in the top layer as a function of solvent exposure. We deduce that the top-layer of the mixed brushes is composed primarily of PMMA after exposure to acetone, while after exposure to toluene this changes to PS. Access to simultaneously measured topographic and chemical information allows direct correlation of the chemical morphology of the sample with topographic information. Our results demonstrate the potential of s-SNIM for chemical mapping based on distinct infrared absorption properties of polymers with a high spatial resolution of 80 nm x 80 nm.
Reversible structuring of photosensitive polymer films by surface plasmon near field radiation
(2011)
We report on the fabrication and characterisation of a novel type of hybrid azo-modified photosensitive polymer film with a nanoscale metallic structuring integrated into the substrate. The metal structures permit to generate surface plasmon near fields when irradiated by UV-light from the rear without directly illuminating the polymer. This allows establishment of a localized, complex-shape intensity distribution at sub-wavelength resolution with a corresponding impact on the photosensitive polymer. The possibilities of exploiting this setup are manifold. We find that just by using the change of polarization of the incident light as means of control, the topography can be driven to change between various patterns reversibly. These results are confirmed by numerical simulations and compared with in situ recorded topography changes.
We report on the interaction of cationic azobenzene-containing surfactant with DNA investigated by absorption and fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy. The properties of the surfactant can be controlled with light by reversible switching of the azobenzene unit, incorporated into the surfactant tail, between a hydrophobic trans (visible irradiation) and a hydrophilic cis (UV irradiation) configuration. The influence of the trans-cis isomerization of the azobenzene on the compaction process of DNA molecules and the role of both isomers in the formation and colloidal stability of DNA-surfactant complexes is discussed. It is shown that the trans isomer plays a major role in the DNA compaction process. The influence of the cis isomer on the DNA coil configuration is rather small. The construction of a phase diagram of the DNA concentration versus surfactant/DNA charge ratio allows distancing between three major phases: colloidally stable and unstable compacted globules, and extended coil conformation. There is a critical concentration of DNA above which the compacted globules can be hindered from aggregation and precipitation by adding an appropriate amount of the surfactant in the trans configuration. This is because of the compensation of hydrophobicity of the globules with an increasing amount of the surfactant. Below the critical DNA concentration, the compacted globules are colloidally stable and can be reversibly transferred with light to an extended coil state.
We report on the preparation and characterization of photosensitive polymer brushes. The brushes are synthesized through polymer analogous attachment of azobenzene groups to surface-attached poly(methacrylic acid) (PMAA) chains. The topography of the photosensitive brushes shows a strong reaction upon irradiation with UV light. While homogeneous illumination leaves the polymer topography unchanged, irradiation of the samples with interference patterns with periodically varying light intensity leads to the formation of surface relief gratings (SRG). The height of the stripes of the grating can be controlled by adjusting the irradiation time. The SRG pattern can be erased through solvent treatment when the periodicity of the stripe pattern is less than the length of the fully stretched polymer chains. In the opposite case, photomechanical scission of receding polymer chains is observed during SRG formation, and the inscribed patterns are permanent.
We report on a process inducing photomechanical fracture of chemical bonds in photosensitive PMAA polymer brushes. The photosensitive PMAA polymer brushes were prepared by covalent attachment of azobenzene groups to poly(methylacrylic acid) (PMAA) chains generated by surface-initiated polymerization. While homogeneous irradiation leaves the polymer topography unchanged, the azo-PMAA brushes show a strong response upon irradiation with UV interference patterns. The photoisomerization process in the surface-attached polymer films results in the irreversible formation of surface relief gratings (SRG), which are strongly enhanced upon washing with a good solvent for the polymer. The photomechanical forces during mass transport induced by the irradiation lead to the scission of covalent bounds and accordingly to a degrafting of the polymer chains in areas where the polymer is receding from. It is observed that the number of ruptured chains depends strongly on the amount of azo side chains in the polymer.
The influence of the subphase temperature on the stripe pattern formation during Langmuir-Blodgett transfer (LB patterning) is investigated in a combined experimental and theoretical study. According to our experiments on the LB transfer of dipalmitoylphosphatidylcholine (DPPC) on planar mica substrates, even small temperature changes between 21.5 and 24.5 degrees C lead to significant changes in the monolayer patterns. For a constant surface pressure and dipper speed, the width of the stripes and the overall spatial period of the patterns increase with increasing subphase temperature. Because the stripe patterns are ascribed to alternating monolayer domains in the liquid-expanded and the liquid-condensed phases, the working regime for the formation of stripes is found to depend strongly on the respective surface pressure-area isotherm. These experimental findings are in accordance with the results of a theoretical investigation based on a model that takes hydrodynamics and the monolayer thermodynamics into account.