90.00.00 GEOPHYSICS, ASTRONOMY, AND ASTROPHYSICS (for more detailed headings, see the Geophysics Appendix)
Refine
Document Type
- Doctoral Thesis (10)
Language
- English (10)
Is part of the Bibliography
- yes (10)
Keywords
- galaxy evolution (2)
- stellar physics (2)
- Asteroiden (1)
- Coriolis Effekt (1)
- Coriolis effect (1)
- Dawn mission (1)
- Dawn-Mission (1)
- Doppler Imaging (1)
- Doppler imaging (1)
- Einschlagskrater (1)
Institute
- Institut für Physik und Astronomie (10) (remove)
Supermassive black holes reside in the hearts of almost all massive galaxies. Their evolutionary path seems to be strongly linked to the evolution of their host galaxies, as implied by several empirical relations between the black hole mass (M BH ) and different host galaxy properties. The physical driver of this co-evolution is, however, still not understood. More mass measurements over homogeneous samples and a detailed understanding of systematic uncertainties are required to fathom the origin of the scaling relations.
In this thesis, I present the mass estimations of supermassive black holes in the nuclei of one late-type and thirteen early-type galaxies. Our SMASHING sample extends from the intermediate to the massive galaxy mass regime and was selected to fill in gaps in number of galaxies along the scaling relations. All galaxies were observed at high spatial resolution, making use of the adaptive-optics mode of integral field unit (IFU) instruments on state-of-the-art telescopes (SINFONI, NIFS, MUSE). I extracted the stellar kinematics from these observations and constructed dynamical Jeans and Schwarzschild models to estimate the mass of the central black holes robustly. My new mass estimates increase the number of early-type galaxies with measured black hole masses by 15%. The seven measured galaxies with nuclear light deficits (’cores’) augment the sample of cored galaxies with measured black holes by 40%. Next to determining massive black hole masses, evaluating the accuracy of black hole masses is crucial for understanding the intrinsic scatter of the black hole- host galaxy scaling relations. I tested various sources of systematic uncertainty on my derived mass estimates.
The M BH estimate of the single late-type galaxy of the sample yielded an upper limit, which I could constrain very robustly. I tested the effects of dust, mass-to-light ratio (M/L) variation, and dark matter on my measured M BH . Based on these tests, the typically assumed constant M/L ratio can be an adequate assumption to account for the small amounts of dark matter in the center of that galaxy. I also tested the effect of a variable M/L variation on the M BH measurement on a second galaxy. By considering stellar M/L variations in the dynamical modeling, the measured M BH decreased by 30%. In the future, this test should be performed on additional galaxies to learn how an as constant assumed M/L flaws the estimated black hole masses.
Based on our upper limit mass measurement, I confirm previous suggestions that resolving the predicted BH sphere-of-influence is not a strict condition to measure black hole masses. Instead, it is only a rough guide for the detection of the black hole if high-quality, and high signal-to-noise IFU data are used for the measurement. About half of our sample consists of massive early-type galaxies which show nuclear surface brightness cores and signs of triaxiality. While these types of galaxies are typically modeled with axisymmetric modeling methods, the effects on M BH are not well studied yet. The massive galaxies of our presented galaxy sample are well suited to test the effect of different stellar dynamical models on the measured black hole mass in evidently triaxial galaxies. I have compared spherical Jeans and axisymmetric Schwarzschild models and will add triaxial Schwarzschild models to this comparison in the future. The constructed Jeans and Schwarzschild models mostly disagree with each other and cannot reproduce many of the triaxial features of the galaxies (e.g., nuclear sub-components, prolate rotation). The consequence of the axisymmetric-triaxial assumption on the accuracy of M BH and its impact on the black hole - host galaxy relation needs to be carefully examined in the future.
In the sample of galaxies with published M BH , we find measurements based on different dynamical tracers, requiring different observations, assumptions, and methods. Crucially, different tracers do not always give consistent results. I have used two independent tracers (cold molecular gas and stars) to estimate M BH in a regular galaxy of our sample. While the two estimates are consistent within their errors, the stellar-based measurement is twice as high as the gas-based. Similar trends have also been found in the literature. Therefore, a rigorous test of the systematics associated with the different modeling methods is required in the future. I caution to take the effects of different tracers (and methods) into account when discussing the scaling relations.
I conclude this thesis by comparing my galaxy sample with the compilation of galaxies with measured black holes from the literature, also adding six SMASHING galaxies, which were published outside of this thesis. None of the SMASHING galaxies deviates significantly from the literature measurements. Their inclusion to the published early-type galaxies causes a change towards a shallower slope for the M BH - effective velocity dispersion relation, which is mainly driven by the massive galaxies of our sample. More unbiased and homogenous measurements are needed in the future to determine the shape of the relation and understand its physical origin.
Climate change affects societies across the globe in various ways. In addition to gradual changes in temperature and other climatic variables, global warming is likely to increase intensity and frequency of extreme weather events.
Beyond biophysical impacts, these also directly affect societal and economic activity. Additionally, indirect effects can occur; spatially, economic losses can spread along global supply-chains; temporally, climate impacts can change the economic development trajectory of countries.
This thesis first examines how climate change alters river flood risk and its local socio-economic implications. Then, it studies the global economic response to river floods in particular, and to climate change in general.
Changes in high-end river flood risk are calculated for the next three decades on a global scale with high spatial resolution. In order to account for uncertainties, this assessment makes use of an ensemble of climate and hydrological models as well as a river routing model, that is found to perform well regarding peak river discharge. The results show an increase in high-end flood risk in many parts of the world, which require profound adaptation efforts. This pressure to adapt is measured as the enhancement in protection level necessary to stay at historical high-end risk. In developing countries as well as in industrialized regions, a high pressure to adapt is observed - the former to increase low protection levels, the latter to maintain the low risk levels perceived in the past.
Further in this thesis, the global agent-based dynamic supply-chain model acclimate is developed. It models the cascading of indirect losses in the global supply network. As an anomaly model its agents - firms and consumers - maximize their profit locally to respond optimally to local perturbations. Incorporating quantities as well as prices on a daily basis, it is suitable to dynamically resolve the impacts of unanticipated climate extremes.
The model is further complemented by a static measure, which captures the inter-dependencies between sectors across regions that are only connected indirectly. These higher-order dependencies are shown to be important for a comprehensive assessment of loss-propagation and overall costs of local disasters.
In order to study the economic response to river floods, the acclimate model is driven by flood simulations. Within the next two decades, the increase in direct losses can only partially be compensated by market adjustments, and total losses are projected to increase by 17% without further adaptation efforts. The US and the EU are both shown to receive indirect losses from China, which is strongly affected directly. However, recent trends in the trade relations leave the EU in a better position to compensate for these losses.
Finally, this thesis takes a broader perspective when determining the investment response to the climate change damages employing the integrated assessment model DICE. On an optimal economic development path, the increase in damages is anticipated as emissions and consequently temperatures increase. This leads to a significant devaluation of investment returns and the income losses from climate damages almost double.
Overall, the results highlight the need to adapt to extreme weather events - local physical adaptation measures have to be combined with regional and global policy measures to prepare the global supply-chain network to climate change.
The solar activity and its consequences affect space weather and Earth’s climate. The solar activity exhibits a cyclic behaviour with a period of about 11 years. The solar cycle properties are governed by the dynamo taking place in the interior of the Sun, and they are distinctive. Extending the knowledge about solar cycle properties into the past is essential for understanding the solar dynamo and forecasting space weather. It can be acquired through the analysis of historical sunspot drawings. Sunspots are the dark areas, which are associated with strong magnetic fields, on the solar surface. Sunspots are the oldest and longest available observed features of solar activity.
One of the longest available records of sunspot drawings is the collection by Samuel Heinrich Schwabe during 1825–1867. The sunspot sizes measured from digitized Schwabe drawings are not to scale and need to be converted into physical sunspot areas. We employed a statistical approach assuming that the area distribution of sunspots was the same in the 19th century as it was in the 20th century. Umbral areas for about 130 000 sunspots observed by Schwabe were obtained. The annually averaged sunspot areas correlate reasonably well with the sunspot number. Tilt angles and polarity separations of sunspot groups were calculated assuming them to be bipolar. There is, of course, no polarity information in the observations. We derived an average tilt angle by attempting to exclude unipolar groups with a minimum separation of the two surmised polarities and an outlier rejection method, which follows the evolution of each group and detects the moment, when it turns unipolar as it decays. As a result, the tilt angles, although displaying considerable natural scatter, are on average 5.85° ± 0.25°, with the leading
polarity located closer to the equator, in good agreement with tilt angles obtained from 20th century data sets. Sources of uncertainties in the tilt angle determination are discussed and need to be addressed whenever different data sets are combined.
Digital images of observations printed in the books Rosa Ursina and Prodromus pro sole mobili by Christoph Scheiner, as well as the drawings from Scheiner’s letters to Marcus Welser, are analyzed to obtain information on the positions and sizes of sunspots that appeared before the Maunder minimum. In most cases, the given orientation of the ecliptic is used to set up the heliographic coordinate system for the drawings. Positions and sizes are measured manually displaying the drawings on a computer screen. Very early drawings have no indication of the solar orientation. A rotational matching using common spots of adjacent days is used in some cases, while in other cases, the assumption that images were aligned with a zenith–horizon coordinate system appeared to be the most likely. In total, 8167 sunspots were measured. A distribution of sunspot latitudes versus time (butterfly diagram) is obtained for Scheiner’s observations. The observations of 1611 are very inaccurate, but the drawings of 1612 have at least an indication of the solar orientation, while the remaining part of the spot positions from 1618–1631 have good to very good accuracy. We also computed 697 tilt angles of apparent bipolar sunspot groups, which were observed in the period 1618–1631. We find that the average tilt angle of nearly 4° does not significantly differ from the 20th century values.
The solar cycle properties seem to be related to the tilt angles of sunspot groups, and it is an important parameter in the surface flux transport models. The tilt angles of bipolar sunspot groups from various historical sets of solar drawings including from Schwabe and Scheiner are analyzed. Data by Scheiner, Hevelius, Staudacher, Zucconi, Schwabe, and Spörer deliver a series of average tilt angles spanning a period of 270 years, in addition to previously found values for 20th-century data obtained by other authors. We find that the average tilt angles before the Maunder minimum were not significantly different from modern values. However, the average tilt angles of a period 50 years after the Maunder minimum, namely for cycles 0 and 1, were much lower and near zero. The typical tilt angles before the Maunder minimum suggest that abnormally low tilt angles were not responsible for driving the solar cycle into a grand minimum.
With the Schwabe (1826–1867) and Spörer (1866–1880) sunspot data, the butterfly diagram of sunspot groups extends back till 1826. A recently developed method, which separates the wings of the butterfly diagram based on the long gaps present in sunspot group occurrences at different latitudinal bands, is used to separate the wings of the butterfly diagram. The cycle-to-cycle variation in the start (F), end (L), and highest (H) latitudes of the wings with respect to the strength of the wings are analyzed. On the whole, the wings of the stronger cycles tend to start at higher latitudes and have a greater extent. The time spans of the wings and the time difference between the wings in the northern hemisphere display a quasi-periodicity of 5–6 cycles. The average wing overlap is zero in the southern hemisphere, whereas it is 2–3 months in the north. A marginally significant oscillation of about 10 solar cycles is found in the asymmetry of the L latitudes. This latest, extended database of butterfly wings provides new observational constraints, regarding the spatio-temporal distribution of sunspot occurrences over the solar cycle, to solar dynamo models.
In the current paradigm of cosmology, the formation of large-scale structures is mainly driven by non-radiating dark matter, making up the dominant part of the matter budget of the Universe. Cosmological observations however, rely on the detection of luminous galaxies, which are biased tracers of the underlying dark matter. In this thesis I present cosmological reconstructions of both, the dark matter density field that forms the cosmic web, and cosmic velocities, for which both aspects of my work are delved into, the theoretical formalism and the results of its applications to cosmological simulations and also to a galaxy redshift survey.The foundation of our method is relying on a statistical approach, in which a given galaxy catalogue is interpreted as a biased realization of the underlying dark matter density field. The inference is computationally performed on a mesh grid by sampling from a probability density function, which describes the joint posterior distribution of matter density and the three dimensional velocity field. The statistical background of our method is described in Chapter ”Implementation of argo”, where the introduction in sampling methods is given, paying special attention to Markov Chain Monte-Carlo techniques. In Chapter ”Phase-Space Reconstructions with N-body Simulations”, I introduce and implement a novel biasing scheme to relate the galaxy number density to the underlying dark matter, which I decompose into a deterministic part, described by a non-linear and scale-dependent analytic expression, and a stochastic part, by presenting a negative binomial (NB) likelihood function that models deviations from Poissonity. Both bias components had already been studied theoretically, but were so far never tested in a reconstruction algorithm. I test these new contributions againstN-body simulations to quantify improvements and show that, compared to state-of-the-art methods, the stochastic bias is inevitable at wave numbers of k≥0.15h Mpc^−1 in the power spectrum in order to obtain unbiased results from the reconstructions. In the second part of Chapter ”Phase-Space Reconstructions with N-body Simulations” I describe and validate our approach to infer the three dimensional cosmic velocity field jointly with the dark matter density. I use linear perturbation theory for the large-scale bulk flows and a dispersion term to model virialized galaxy motions, showing that our method is accurately recovering the real-space positions of the redshift-space distorted galaxies. I analyze the results with the isotropic and also the two-dimensional power spectrum.Finally, in Chapter ”Phase-space Reconstructions with Galaxy Redshift Surveys”, I show how I combine all findings and results and apply the method to the CMASS (for Constant (stellar) Mass) galaxy catalogue of the Baryon Oscillation Spectroscopic Survey (BOSS). I describe how our method is accounting for the observational selection effects inside our reconstruction algorithm. Also, I demonstrate that the renormalization of the prior distribution function is mandatory to account for higher order contributions in the structure formation model, and finally a redshift-dependent bias factor is theoretically motivated and implemented into our method. The various refinements yield unbiased results of the dark matter until scales of k≤0.2 h Mpc^−1in the power spectrum and isotropize the galaxy catalogue down to distances of r∼20h^−1 Mpc in the correlation function. We further test the results of our cosmic velocity field reconstruction by comparing them to a synthetic mock galaxy catalogue, finding a strong correlation between the mock and the reconstructed velocities. The applications of both, the density field without redshift-space distortions, and the velocity reconstructions, are very broad and can be used for improved analyses of the baryonic acoustic oscillations, environmental studies of the cosmic web, the kinematic Sunyaev-Zel’dovic or integrated Sachs-Wolfe effect.
Observational and computational extragalactic astrophysics are two fields of research that study a similar subject from different perspectives. Observational extragalactic astrophysics aims, by recovering the spectral energy distribution of galaxies at different wavelengths, to reliably measure their properties at different cosmic times and in a large variety of environments. Analyzing the light collected by the instruments, observers try to disentangle the different processes occurring in galaxies at the scales of galactic physics, as well as the effect of larger scale processes such as mergers and accretion, in order to obtain a consistent picture of galaxy formation and evolution. On the other hand, hydrodynamical simulations of galaxy formation in cosmological context are able to follow the evolution of a galaxy along cosmic time, taking into account both external processes such as mergers, interactions and accretion, and internal mechanisms such as feedback from Supernovae and Active Galactic Nuclei. Due to the great advances in both fields of research, we have nowadays available spectral and photometric information for a large number of galaxies in the Universe at different cosmic times, which has in turn provided important knowledge about the evolution of the Universe; at the same time, we are able to realistically simulate galaxy formation and evolution in large volumes of the Universe, taking into account the most relevant physical processes occurring in galaxies.
As these two approaches are intrinsically different in their methodology and in the information they provide, the connection between simulations and observations is still not fully established, although simulations are often used in galaxies' studies to interpret observations and assess the effect of the different processes acting on galaxies on the observable properties, and simulators usually test the physical recipes implemented in their hydrodynamical codes through the comparison with observations. In this dissertation we aim to better connect the observational and computational approaches in the study of galaxy formation and evolution, using the methods and results of one field to test and validate the methods and results of the other.
In a first work we study the biases and systematics in the derivation of the galaxy properties in observations. We post-process hydrodynamical cosmological simulations of galaxy formation to calculate the galaxies' Spectral Energy Distributions (SEDs) using different approaches, including radiative transfer techniques. Comparing the direct results of the simulations with the quantities obtained applying observational techniques to these synthetic SEDs, we are able to make an analysis of the biases intrinsic in the observational algorithms, and quantify their accuracy in recovering the galaxies' properties, as well as estimating the uncertainties affecting a comparison between simulations and observations when different approaches to obtain the observables are followed. Our results show that for some quantities such as the stellar ages, metallicities and gas oxygen abundances large differences can appear, depending on the technique applied in the derivation.
In a second work we compare a set of fifteen galaxies similar in mass to the Milky Way and with a quiet merger history in the recent past (hence expected to have properties close to spiral galaxies), simulated in a cosmological context, with data from the Sloan Digital Sky Survey (SDSS). We use techniques to obtain the observables as similar as possible to the ones applied in SDSS, with the aim of making an unbiased comparison between our set of hydrodynamical simulations and SDSS observations. We quantify the differences in the physical properties when these are obtained directly from the simulations without post-processing, or mimicking the SDSS observational techniques. We fit linear relations between the values derived directly from the simulations and following SDSS observational procedures, which in most of the cases have relatively high correlation, that can be easily used to more reliably compare simulations with SDSS data. When mimicking SDSS techniques, these simulated galaxies are photometrically similar to galaxies in the SDSS blue sequence/green valley, but have in general older ages, lower SFRs and metallicities compared to the majority of the spirals in the observational dataset.
In a third work, we post-process hydrodynamical simulations of galaxies with radiative transfer techniques, to generate synthetic data that mimic the properties of the CALIFA Integral Field Spectroscopy (IFS) survey. We reproduce the main characteristics of the CALIFA observations in terms of field of view and spaxel physical size, data format, point spread functions and detector noise. This 3-dimensional dataset is suited to be analyzed by the same algorithms applied to the CALIFA dataset, and can be used as a tool to test the ability of the observational algorithms in recovering the properties of the CALIFA galaxies. To this purpose, we also generate the resolved maps of the simulations' properties, calculated directly from the hydrodynamical snapshots, or from the simulated spectra prior to the addition of the noise.
Our work shows that a reliable connection between the models and the data is of crucial importance both to judge the output of galaxy formation codes and to accurately test the observational algorithms used in the analysis of galaxy surveys' data. A correct interpretation of observations will be particularly important in the future, in light of the several ongoing and planned large galaxy surveys that will provide the community with large datasets of properties of galaxies (often spatially-resolved) at different cosmic times, allowing to study galaxy formation physics at a higher level of detail than ever before. We have shown that neglecting the observational biases in the comparison between simulations and an observational dataset may move the simulations to different regions in the planes of the observables, strongly affecting the assessment of the correctness of the sub-resolution physical models implemented in galaxy formation codes, as well as the interpretation of given observational results using simulations.
This work reports about new high-resolution imaging and spectroscopic observations of solar type III radio bursts at low radio frequencies in the range from 30 to 80 MHz. Solar type III radio bursts are understood as result of the beam-plasma interaction of electron beams in the corona. The Sun provides a unique opportunity to study these plasma processes of an active star. Its activity appears in eruptive events like flares, coronal mass ejections and radio bursts which are all accompanied by enhanced radio emission. Therefore solar radio emission carries important information about plasma processes associated with the Sun’s activity. Moreover, the Sun’s atmosphere is a unique plasma laboratory with plasma processes under conditions not found in terrestrial laboratories. Because of the Sun’s proximity to Earth, it can be studied in greater detail than any other star but new knowledge about the Sun can be transfer to them. This “solar stellar connection” is important for the understanding of processes on other stars.
The novel radio interferometer LOFAR provides imaging and spectroscopic capabilities to study these processes at low frequencies. Here it was used for solar observations.
LOFAR, the characteristics of its solar data and the processing and analysis of the latter with the Solar Imaging Pipeline and Solar Data Center are described. The Solar Imaging Pipeline is the central software that allows using LOFAR for solar observations. So its development was necessary for the analysis of solar LOFAR data and realized here. Moreover a new density model with heat conduction and Alfvén waves was developed that provides the distance of radio bursts to the Sun from dynamic radio spectra.
Its application to the dynamic spectrum of a type III burst observed on March 16, 2016 by LOFAR shows a nonuniform radial propagation velocity of the radio emission. The analysis of an imaging observation of type III bursts on June 23, 2012 resolves a burst as bright, compact region localized in the corona propagating in radial direction along magnetic field lines with an average velocity of 0.23c. A nonuniform propagation velocity is revealed. A new beam model is presented that explains the nonuniform motion of the radio source as a propagation effect of an electron ensemble with a spread velocity distribution and rules out a monoenergetic electron distribution. The coronal electron number density is derived in the region from 1.5 to 2.5 R☉ and fitted with the newly developed density model. It determines the plasma density for the interplanetary space between Sun and Earth. The values correspond to a 1.25- and 5-fold Newkirk model for harmonic and fundamental emission, respectively. In comparison to data from other radio instruments the LOFAR data shows a high sensitivity and resolution in space, time and frequency.
The new results from LOFAR’s high resolution imaging spectroscopy are consistent with current theories of solar type III radio bursts and demonstrate its capability to track fast moving radio sources in the corona. LOFAR solar data is found to be a valuable source for solar radio physics and opens a new window for studying plasma processes associated with highly energetic electrons in the solar corona.
Solar-like stars maintain their magnetic fields thanks to a dynamo mechanism. The Babcock-Leighton dynamo is one possible dynamo that has the particularity to require magnetic flux tubes. Magnetic flux tubes are assumed to form at the bottom of the convective zone and rise buoyantly to the surface. A delayed dynamo model has been suggested, where the delay accounts for the rise time of the magnetic flux tubes; a time, that has been ignored by former studies.
The present thesis aims to study the applicability of the flux tube/Babcock-Leighton dynamo to other stars. To do so, we attempt to constrain the rise time of magnetic flux tubes thanks to the first fully compressible MHD simulations of rising magnetic flux tubes in stratified rotating spherical shells.
Such simulations are limited to an unrealistic parameter space, therefore, a scaling relation is required to scale the results to realistic physical regimes. We extended earlier works on 2D scaling relations and derived a general scaling law valid for both 2D and 3D. We then carried out two large series of numerical experiments and verified that the scaling law we have derived indeed applies to the fully non-linear case. It allowed us to extract a constraint for the rise time of magnetic flux tubes that is valid for any solar-like star. We finally introduced this constraint to a delayed dynamo model.
By carrying out simulations of a mean-field, delayed, flux tube/Babcock-Leighton dynamo, we were able to identify a new dynamo regime resulting from the delay. This regime requires delays about an entire cycle and exhibits subequipartition magnetic activity. Revealing this new regime shows that even for long delays the flux tube/Babcock-Leighton dynamo can still deliver non-decaying solutions and remains a good candidate for a wide range of solar-like stars.
Optical frequency combs (OFC) constitute an array of phase-correlated equidistant spectral lines with nearly equal intensities over a broad spectral range. The adaptations of combs generated in mode-locked lasers proved to be highly efficient for the calibration of high-resolution (resolving power > 50000) astronomical spectrographs. The observation of different galaxy structures or the studies of the Milky Way are done using instruments in the low- and medium resolution range. To such instruments belong, for instance, the Multi Unit Spectroscopic Explorer (MUSE) being developed for the Very Large Telescope (VLT) of the European Southern Observatory (ESO) and the 4-metre Multi-Object Spectroscopic Telescope (4MOST) being in development for the ESO VISTA 4.1 m Telescope. The existing adaptations of OFC from mode-locked lasers are not resolvable by these instruments.
Within this work, a fibre-based approach for generation of OFC specifically in the low- and medium resolution range is studied numerically. This approach consists of three optical fibres that are fed by two equally intense continuous-wave (CW) lasers. The first fibre is a conventional single-mode fibre, the second one is a suitably pumped amplifying Erbium-doped fibre with anomalous dispersion, and the third one is a low-dispersion highly nonlinear optical fibre. The evolution of a frequency comb in this system is governed by the following processes: as the two initial CW-laser waves with different frequencies propagate through the first fibre, they generate an initial comb via a cascade of four-wave mixing processes. The frequency components of the comb are phase-correlated with the original laser lines and have a frequency spacing that is equal to the initial laser frequency separation (LFS), i.e. the difference in the laser frequencies. In the time domain, a train of pre-compressed pulses with widths of a few pico-seconds arises out of the initial bichromatic deeply-modulated cosine-wave. These pulses undergo strong compression in the subsequent amplifying Erbium-doped fibre: sub-100 fs pulses with broad OFC spectra are formed. In the following low-dispersion highly nonlinear fibre, the OFC experience a further broadening and the intensity of the comb lines are fairly equalised. This approach was mathematically modelled by means of a Generalised Nonlinear Schrödinger Equation (GNLS) that contains terms describing the nonlinear optical Kerr effect, the delayed Raman response, the pulse self-steepening, and the linear optical losses as well as the wavelength-dependent Erbium gain profile for the second fibre. The initial condition equation being a deeply-modulated cosine-wave mimics the radiation of the two initial CW lasers. The numerical studies are performed with the help of Matlab scripts that were specifically developed for the integration of the GNLS and the initial condition according to the proposed approach for the OFC generation. The scripts are based on the Fourth-Order Runge-Kutta in the Interaction Picture Method (RK4IP) in combination with the local error method.
This work includes the studies and results on the length optimisation of the first and the second fibre depending on different values of the group-velocity dispersion of the first fibre. Such length optimisation studies are necessary because the OFC have the biggest possible broadband and exhibit a low level of noise exactly at the optimum lengths. Further, the optical pulse build-up in the first and the second fibre was studied by means of the numerical technique called Soliton Radiation Beat Analysis (SRBA). It was shown that a common soliton crystal state is formed in the first fibre for low laser input powers. The soliton crystal continuously dissolves into separated optical solitons as the input power increases. The pulse formation in the second fibre is critically dependent on the features of the pulses formed in the first fibre. I showed that, for low input powers, an adiabatic soliton compression delivering low-noise OFC occurs in the second fibre. At high input powers, the pulses in the first fibre have more complicated structures which leads to the pulse break-up in the second fibre with a subsequent degradation of the OFC noise performance. The pulse intensity noise studies that were performed within the framework of this thesis allow making statements about the noise performance of an OFC. They showed that the intensity noise of the whole system decreases with the increasing value of LFS.
This work investigates the influence of the Coriolis force on mass motion related to the Rheasilvia impact basin on asteroid (4) Vesta's southern hemisphere. The giant basin is 500km in diameter, with a centre which nearly coincides with the rotation axis of Vesta. The Rheasilvia basin partially overlaps an earlier, similarly large impact basin, Veneneia.
Mass motion within and in the vicinity of the Rheasilvia basin includes slumping and landslides, which, primarily due to their small linear extents, have not been noticeably affected by the Coriolis force. However, a series of ridges related to the basin exhibit significant curvature, which may record the effect of the Coriolis force on the mass motion which generated them.
In this thesis 32 of these curved ridges, in three geologically distinct regions, were examined. The mass motion velocities from which the ridge curvatures may have resulted during the crater modification stage were investigated. Velocity profiles were derived by fitting inertial circles along the curved ridges and considering both the current and past rotation states of Vesta. An iterative, statistical approach was used, whereby the radii of inertial circles were obtained through repeated fitting to triplets of points across the ridges. The most frequently found radius for each central point was then used for velocity derivation at that point.
The results of the velocity analysis are strongly supportive of a Coriolis force origin for the curved ridges. Derived velocities (29.6 ± 24.6 m/s) generally agree well with previously published predictions from numerical simulations of mass motion during the impact process. Topographical features such as local slope gradient and mass deposition regions on the curved ridges also independently agree with regions in which the calculated mass motion accelerates or decelerates.
Sections of constant acceleration, deceleration and constant velocity are found, showing that mass motion is being governed by varying conditions of topography, regolith structure and friction. Estimates of material properties such as the effective viscosities (1.9-9.0·10⁶ Pa·s) and coefficients of friction (0.02-0.81) are derived from the velocity profile information in these sections. From measured accelerations of mass motions on the crater wall, it is also shown that the crater walls must have been locally steeper at the time of the mass motion.
Together with these novel insights into the state and behaviour of material moving during the modification stage of Rheasilvia's formation, this work represents the first time that the Coriolis Effect on mass motions during crater formation has been shown to result in diagnostic features preserved until today.
Spots on stellar surfaces are thought to be stellar analogues of sunspots. Thus, starspots are direct manifestations of strong magnetic fields. Their decay rate is directly related to the magnetic diffusivity, which itself is a key quantity for the deduction of an activity cycle length. So far, no single starspot decay has been observed, and thus no stellar activity cycle was inferred from its corresponding turbulent diffusivity.
We investigate the evolution of starspots on the rapidly-rotating K0 giant XX Triangulum. Continuous high-resolution and phase-resolved spectroscopy was obtained with the robotic 1.2-m STELLA telescope on Tenerife over a timespan of six years. With our line-profile inversion code iMap we reconstruct a total of 36 consecutive Doppler maps. To quantify starspot area decay and growth, we match the observed images with simplified spot models based on a Monte-Carlo approach.
It is shown that the surface of XX Tri is covered with large high-latitude and even polar spots and with occasional small equatorial spots. Just over the course of six years, we see a systematically changing spot distribution with various time scales and morphology such as spot fragmentation and spot merging as well as spot decay and formation.
For the first time, a starspot decay rate on another star than the Sun is determined. From our spot-decay analysis we determine an average linear decay rate of D = -0.067±0.006 Gm^2/day. From this decay rate, we infer a turbulent diffusivity of η_τ = (6.3±0.5) x 10^14 cm^2/s and consequently predict an activity cycle of 26±6 years. The obtained cycle length matches very well with photometric observations.
Our time-series of Doppler maps further enables to investigate the differential rotation of XX Tri. We therefore applied a cross-correlation analysis. We detect a weak solar-like differential rotation with a surface shear of α = 0.016±0.003. This value agrees with similar studies of other RS CVn stars.
Furthermore, we found evidence for active longitudes and flip-flops. Whereas the more active longitude is located in phase towards the (unseen) companion star, the weaker active longitude is located at the opposite stellar hemisphere. From their periodic appearance, we infer a flip-flop cycle of ~2 years. Both activity phenomena are common on late-type binary stars.
Last but not least we redetermine several astrophysical properties of XX Tri and its binary system, as large datasets of photometric and spectroscopic observations are available since its last determination in 1999. Additionally, we compare the rotational spot-modulation from photometric and spectroscopic studies.