Refine
Year of publication
Is part of the Bibliography
- yes (21)
Keywords
- Export regime (2)
- Water quality (2)
- Amplitude ratio (1)
- Catchment (1)
- Climate Adaptation (1)
- Climate Mitigation (1)
- Compression (1)
- Concentration-discharge relationship (1)
- Concentration-discharge relationships (1)
- Deutschland (1)
Institute
- Institut für Geowissenschaften (21) (remove)
We present a study of the local atomic environment of the oxygen atoms in the aqueous solutions of NaOH and HCl under simultaneous high-temperature and high-pressure conditions. Experimental nonresonant X-ray Raman scattering core-level spectra at the oxygen K-edge show systematic changes as a function of temperature and pressure. These systematic changes are distinct for the two different solutes and are described well by calculations within the Bethe- Salpeter formalism for snapshots from ab initio molecular dynamics simulations. The agreement between experimental and simulation results allows us to use the computations for a detailed fingerprinting analysis in an effort to elucidate the local atomic structure and hydrogen-bonding topology in these relevant solutions. We observe that both electrolytes, especially NaOH, enhance hydrogen bonding and tetrahedrality in the water structure at supercritical conditions, in particular in the vicinity of the hydration shells. This effect is accompanied with the association of the HCl and NaOH molecules at elevated temperatures.
Weltweit verursachen Städte etwa 70 % der Treibhausgasemissionen und sind daher wichtige Akteure im Klimaschutz bzw. eine wichtige Zielgruppe von Klimapolitiken. Gleichzeitig sind Städte besonders stark von möglichen Auswirkungen des Klimawandels betroffen: Insbesondere extreme Wetterereignisse wie Hitzewellen oder Starkregenereignisse mit Überflutungen verursachen in Städten hohe Sachschäden und wirken sich negativ auf die Gesundheit der städtischen Bevölkerung aus. Daher verfolgt das Projekt ExTrass das Ziel, die städtische Resilienz gegenüber extremen Wetterereignissen in enger Zusammenarbeit mit Stadtverwaltungen, Strukturen des Bevölkerungsschutzes und der Zivilgesellschaft zu stärken. Im Fokus stehen dabei (kreisfreie) Groß- und Mittelstädte mit 50.000 bis 500.000 Einwohnern, insbesondere die Fallstudienstädte Potsdam, Remscheid und Würzburg.
Der vorliegende Bericht beinhaltet die Ergebnisse der 14-monatigen Definitionsphase von ExTrass, in der vor allem die Abstimmung eines Arbeitsprogramms im Mittelpunkt stand, das in einem nachfolgenden dreijährigen Forschungsprojekt (F+E-Phase) gemeinsam von Wissenschaft und Praxispartnern umgesetzt werden soll. Begleitend wurde eine Bestandsaufnahme von Klimaanpassungs- und Klimaschutzstrategien/-plänen in 99 deutschen Groß- und Mittelstädten vorgenommen. Zudem wurden für Potsdam und Würzburg Pfadanalysen für die Klimapolitik durchgeführt. Darin wird insbesondere die Bedeutung von Schlüsselakteuren deutlich. Weiterhin wurden im Rahmen von Stakeholder-Workshops Anpassungsherausforderungen und aktuelle Handlungsbedarfe in den Fallstudienstädten identifiziert und Lösungsansätze erarbeitet, die in der F+E-Phase entwickelt und getestet werden sollen. Neben Maßnahmen auf gesamtstädtischer Ebene und auf Stadtteilebene wurden Maßnahmen angestrebt, die die Risikowahrnehmung, Vorsorge und Selbsthilfefähigkeit von Unternehmen und Bevölkerung stärken können. Daher wurde der Stand der Risikokommunikation in Deutschland für das Projekt aufgearbeitet und eine erste Evaluation von Risikokommunikationswerkzeugen durchgeführt. Der Bericht endet mit einer Kurzfassung des Arbeitsprogramms 2018-2021.
A confocal set-up is presented that improves micro-XRF and XAFS experiment with high-pressure e diamond-anvil cells (DACs) In this experiment a probing volume is defined by the focus of the incoming synchrotron radiation beam and that of a polycapillary X-ray half-lens with a very long working distance, which is placed in front of the fluorescence detector This set-up enhances the quality of the fluorescence and XAFS spectra, and thus the sensitivity for detecting elements at low concentrations. It efficiently suppresses signal from outside the sample chamber, which stems from elastic and inelastic scattering of the incoming beam by the diamond anvils as well as from excitation of fluorescence from the body of the DAC
The iron speciation in hydrous haplotonalitic and haplogranitic silicate glasses was studied using XAFS spectroscopy and transmission electron microscopy (TEM). Spectral features occurring at the main crest of the XANES at the iron K-edge of hydrous glasses indicate contributions to the spectra by iron-moieties present in a more ordered structural environment than found in the dry glass. These differences are also suggested by analysis of the EXAFS. These effects are not completely suppressed even for those samples that were quenched with a higher cooling rate. Strongest differences to the dry glass are observed for a sample that was quenched slowly through the temperature of glass transformation. Crystals (60 to 1500 nm in size) of magnetite, maghemite and another unidentified phase were observed in this sample by TEM, whereas no crystals were found in samples quenched with regular or high cooling rates. In-situ XANES measurements up to 700 degrees C and 500 MPa were performed to reveal the origin (i.e., during synthesis or quench) of the structural differences for those hydrous glasses that do not display any detectable crystallization. The comparison of XANES spectra collected on Fe2+ in water-saturated haplogranitic melt at 700 degrees C and 500 MPa and on Fe2+ in dry melt at 1150 degrees C shows that the local structural environment of Fe2+ in both systems is similar. This indicates that there is no detectable and direct influence of water on the local structure around iron in this type of melt. Hence, the differences observed between hydrous and dry glasses can only be related to artefacts formed during the quench process. (c) 2006 Elsevier B.V. All rights reserved
The crystallization kinetics of silicate liquids were studied experimentally in the system haplogranite-B-Li-H2O, at variable degrees of undercooling and variable water concentration. We investigated the kinetics of nucleation and crystallization of unseeded synthetic hydrous haplogranite with 1 wt % Li2O + 2 center dot 3 wt % B2O3 added (composition C1) and 2 wt % Li2O + 4 center dot 6 wt % B2O3 added (composition C2). Compositions C1 and C2 are simplified representative bulk compositions of Li-rich pegmatites and their highly differentiated cores, respectively. Starting water contents varied between 3 and 9 wt %. With few exceptions, the system remained water-undersaturated. About 86 isothermal runs of 1-60 days duration, grouped in 25 time series of constant temperature and initial H2O content, were carried out at temperatures from 400 to 700A degrees C at 300 MPa, corresponding to variable degrees of undercooling between the liquidus and glass transition. Viscosity measurements indicate that the glass transition for both compositions is below 400A degrees C for 3 wt % water and below 300A degrees C for 6 center dot 5 wt % water. The melts remained virtually crystal free at 400A degrees C, about 100A degrees C and 120A degrees C above the glass transition for compositions C1 and C2, respectively, in experiments up to 30 days long. This result is consistent with the existence of low-temperature, undercooled melts in the crust. At lower values of undercooling the runs crystallized partially, up to about 70% volume fraction. Undercooling and the amount of water are the main factors controlling nucleation and growth rates, and therefore textures. Minerals nucleate and grow sequentially according to mineral-specific nucleation delays. The mineral assemblage started with Li-Al stuffed quartz (in C1) and virgilite (in C2), solid-solutions between quartz and gamma-spodumene. The quartz-like phases were typically followed by spherulitic alkali feldspar-quartz intergrowths, euhedral petalite, and fine-grained muscovite. Nearly pure quartz formed as rims and replacement of metastable virgilite and stuffed quartz, in particular at the boron- and water-rich crystallization front of large feldspar or petalite. With the exception of muscovite, all minerals nucleated heterogeneously, on the capsule wall or on pre-existing minerals, and grew inwards, towards the capsule center. Experimental textures resembled the textures of zoned pegmatites, including skeletal, graphic, unidirectional, radiating, spherulitic, massive, and replacement textures. In some cases, when fluid saturation was reached, miarolitic cavities developed containing euhedral crystals. Although unidirectional growth rates appeared to slow down in time, volumetric rates for stable graphic alkali-feldspar quartz intergrowths and petalite remained constant for up to 60 days and similar to 70% crystallization. Metastable stuffed quartz and virgilite diminished in their growth rates in runs of 30 days or longer, were resorbed in the melt, and were partially replaced by second-generation quartz. Unobstructed, self-sustained crystal growth in conditions of very low nucleation density appears to be the dominant mechanism to form giant pegmatitic crystals, although experimental growth rates are much slower than predicted in nature based on conductive-cooling models.
Trace element concentrations in aqueous fluids in equilibrium with haplogranitic melt were determined in situ at elevated P-T conditions using hydrothermal diamond-anvil cells and synchrotron-radiation XRF microanalyses. Time- resolved analyses showed that the Rb and Sr concentrations in the fluids became constant in less than 2000 s at all temperatures (500 to 780 degrees C). Although fluid-melt equilibration was very rapid, the change in the concentration of both elements in the fluid with temperature was fairly small (a slight increase for Rb and a slight decrease for Sr). This permitted partitioning data for Rb and Sr between haplogranitic melt and H2O or NaCl+KCl+HCl aqueous solutions at 750 degrees C and 200 to 700 MPa to be obtained from EMP analyses of the quenched melt and the in situ SR-XRF analyses of the equilibrated fluid. The resulting D-Rb(f/m) and D-Sr(f/m) were 0.01 +/- 0.002 and 0.006 +/- 0.001 for water as starting fluid, and increased to 0.47 +/- 0.08 and 0.23 +/- 0.03 for 3.56 m (NaCl+KCl)+0.04 in HCl at pressures of 224 to 360 MPa. In the experiments with H2O as starting fluid, the partition coefficients increased with pressure, i.e. D- Rb(f/m) from 0.01 +/- 0.002 to 0.22 +/- 0.02 and D-Sr(f/m) from 0.006 0.001 to 0.02 +/- 0.005 with a change in pressure from 360 to 700 MPa. At pressures to 360 MPa, the Rb/Sr ratio in the fluid was found to be independent of the initial salt concentration (Rb/Sr = 1.45 +/- 0.6). This ratio increased to 7.89 +/- 1.95 at 700 MPa in experiments with chloride free fluids, which indicates different changes in the Rb and Sr speciation with pressure.
Barium, lanthanum, ytterbium, and yttrium partitioning experiments between fluid-saturated haplogranitic melts and aqueous solutions were conducted at 750 to 950 degrees C and 0.2 to 1 GPa to investigate the effects of melt and fluid composition, pressure, and temperature. Partition coefficients were determined using different experimental methods. On one hand quenched experiments were performed, and on the other hand, trace element contents in the aqueous fluid were determined directly using a hydrothermal diamond-anvil cell and synchrotron radiation X-ray fluorescence microanalysis of K-lines. The latter required a high excitation energy of 50 key due to the high energies necessary to excite the K-lines of the studied elements. The data from these two techniques showed good agreement for chloridic solutions, whereas quenching had a significant effect on results of the experiments with only water in the case of Ba. In Cl-free experiments, lanthanum and yttrium, trace element contents were even below detection limit in the quenched fluids, whereas small concentrations were detected in comparable in-situ experiments. This distinct difference is likely due to back reactions between fluid and melt upon cooling. The partitioning data of all elements show no dependence on the temperature and only small dependence on pressure. In contrast, the partitioning is strongly influenced by the composition of the starting fluid and melt. For chloridic fluids, there was a sharp increase in the Ba, La, Y and Yb partition coefficients with the alumina saturation index (ASI). The Ba partition coefficient increased from 0.002 at an ASI of 0.8 to 0.55 at an ASI of 1.07. At higher ASI, it decreased slightly to 0.2 at an ASI of similar to 1.3. Likewise, it was one to two orders of magnitude higher in chloridic fluids compared to those found in H2O experiments. Fluid-melt partition coefficients of La and Y increased from 0.002 at an ASI of similar to 0.8 to similar to 0.1 at an ASI of 1.2. In the same ASI range, the Yb partition coefficient increased to a maximum value of 0.02. Even at high salinities all elements fractionate into the melt. The compositional dependence of the partitioning data imply that both melt composition and fluid composition have a strong influence on trace element behavior and that complexation of Ba. REE and Y tin the fluid is not only controlled by the presence of Cl- in the fluid. Instead, interaction of these elements with major melt components dissolved in the fluid is very likely.
Hyporheic exchange transports solutes into the subsurface where they can undergo biogeochemical transformations, affecting fluvial water quality and ecology. A three-dimensional numerical model of a natural in-stream gravel bar (20 m x 6 m) is presented. Multiple steady state streamflow is simulated with a computational fluid dynamics code that is sequentially coupled to a reactive transport groundwater model via the hydraulic head distribution at the streambed. Ambient groundwater flow is considered by scenarios of neutral, gaining, and losing conditions. The transformation of oxygen, nitrate, and dissolved organic carbon by aerobic respiration and denitrification in the hyporheic zone are modeled, as is the denitrification of groundwater-borne nitrate when mixed with stream-sourced carbon. In contrast to fully submerged structures, hyporheic exchange flux decreases with increasing stream discharge, due to decreasing hydraulic head gradients across the partially submerged structure. Hyporheic residence time distributions are skewed in the log-space with medians of up to 8 h and shift to symmetric distributions with increasing level of submergence. Solute turnover is mainly controlled by residence times and the extent of the hyporheic exchange flow, which defines the potential reaction area. Although streamflow is the primary driver of hyporheic exchange, its impact on hyporheic exchange flux, residence times, and solute turnover is small, as these quantities exponentially decrease under losing and gaining conditions. Hence, highest reaction potential exists under neutral conditions, when the capacity for denitrification in the partially submerged structure can be orders of magnitude higher than in fully submerged structures.
Dynamics of solute export from catchments can be classified in terms of chemostatic and chemodynamic export regimes by an analysis of concentration-discharge relationships. Previous studies hypothesized that distinct export regimes emerge from the presence of solute mass stores within the catchment and their connectivity to the stream. However, so far a direct link of solute export to identifiable catchment characteristics is missing. Here we investigate long-term time series of stream water quality and quantity of nine neighboring catchments in Central Germany ranging from relatively pristine mountain catchments to agriculturally dominated lowland catchments, spanning large gradients in land use, geology, and climatic conditions. Given the strong collinearity of catchment characteristics we used partial least square regression analysis to quantify the predictive power of these characteristics for median concentrations and the metrics of export regime. We can show that median concentrations and metrics of the export regimes of major ions and nutrients can indeed be inferred from catchment characteristics. Strongest predictors for median concentrations were the share of arable land, discharge per area, runoff coefficient and available water capacity in the root zone of the catchments. The available water capacity in the root zone, the share of arable land being artificially drained and the topographic gradient were found to be the most relevant predictors for the metrics of export regime. These catchment characteristics can represent the size of solute mass store such as the fraction of arable land being a measure for the store of nitrate. On the other hand, catchment characteristics can be a measure for the connectivity of these solute stores to the stream such as the fraction of tile drained land in the catchments. This study demonstrates the potential of data-driven, top down analyses using simple metrics to classify and better understand dominant controls of solute export from catchments. (C) 2015 Elsevier Ltd. All rights reserved.