Refine
Year of publication
- 2019 (21) (remove)
Document Type
- Doctoral Thesis (21) (remove)
Is part of the Bibliography
- yes (21)
Keywords
- Magnetisierungsdynamik (2)
- Spektroskopie (2)
- Sternentwicklung (2)
- Synchronisation (2)
- spectroscopy (2)
- Astronomie (1)
- Bio-Hybrid (1)
- Capella (1)
- Carbonfaser Herstellung (1)
- Chemotaxsis (1)
Institute
- Institut für Physik und Astronomie (21) (remove)
Oscillatory systems under weak coupling can be described by the Kuramoto model of phase oscillators. Kuramoto phase oscillators have diverse applications ranging from phenomena such as communication between neurons and collective influences of political opinions, to engineered systems such as Josephson Junctions and synchronized electric power grids. This thesis includes the author's contribution to the theoretical framework of coupled Kuramoto oscillators and to the understanding of non-trivial N-body dynamical systems via their reduced mean-field dynamics.
The main content of this thesis is composed of four parts. First, a partially integrable theory of globally coupled identical Kuramoto oscillators is extended to include pure higher-mode coupling. The extended theory is then applied to a non-trivial higher-mode coupled model, which has been found to exhibit asymmetric clustering. Using the developed theory, we could predict a number of features of the asymmetric clustering with only information of the initial state provided.
The second part consists of an iterated discrete-map approach to simulate phase dynamics. The proposed map --- a Moebius map --- not only provides fast computation of phase synchronization, it also precisely reflects the underlying group structure of the dynamics. We then compare the iterated-map dynamics and various analogous continuous-time dynamics. We are able to replicate known phenomena such as the synchronization transition of the Kuramoto-Sakaguchi model of oscillators with distributed natural frequencies, and chimera states for identical oscillators under non-local coupling.
The third part entails a particular model of repulsively coupled identical Kuramoto-Sakaguchi oscillators under common random forcing, which can be shown to be partially integrable. Via both numerical simulations and theoretical analysis, we determine that such a model cannot exhibit stationary multi-cluster states, contrary to the numerical findings in previous literature. Through further investigation, we find that the multi-clustering states reported previously occur due to the accumulation of discretization errors inherent in the integration algorithms, which introduce higher-mode couplings into the model. As a result, the partial integrability condition is violated.
Lastly, we derive the microscopic cross-correlation of globally coupled non-identical Kuramoto oscillators under common fluctuating forcing. The effect of correlation arises naturally in finite populations, due to the non-trivial fluctuations of the meanfield. In an idealized model, we approximate the finite-sized fluctuation by a Gaussian white noise. The analytical approximation qualitatively matches the measurements in numerical experiments, however, due to other periodic components inherent in the fluctuations of the mean-field there still exist significant inconsistencies.
Most of the matter in the universe consists of hydrogen. The hydrogen in the intergalactic medium (IGM), the matter between the galaxies, underwent a change of its ionisation state at the epoch of reionisation, at a redshift roughly between 6>z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe.
Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties.
Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity.
With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond.
Carbonfasern haben sich in der Luft- und Raumfahrt etabliert und gewinnen in Alltagsanwendungen wie dem Automobilbereich, Windkraft- und Sportbereich durch ihre hohen Zugfestigkeiten, insbesondere ihrer hohen E-Moduli, und ihrer geringen Dichte immer mehr an Bedeutung. Auf Grund ihrer hohen Kosten, welche sich zur Hälfte aus der Precursorherstellung, inklusive seiner Synthese und seinem Verspinnprozess, dem Lösungsspinnverfahren, ergeben, erhalten zunehmend alternative und schmelzspinnbare Precursoren Interesse. Für die Carbonfaserherstellung wird fast ausschließlich Polyacrylnitril (PAN) verwendet, das vor dem Schmelzen irreversible exotherme Zyklisierungsreaktionen aufweist, welchen sich seine Zersetzung anschließt. Eine Möglichkeit der Reduzierung der Schmelztemperatur von Polymeren ist die Einbringung von Comonomeren zur Erhöhung des freien Volumens und die Reduzierung der intermolekularen Wechselwirkungen als interne Weichmacher. Wie am Fraunhofer IAP gezeigt wurde, kann mittels 2-Methoxyethylacrylat (MEA) die Schmelztemperatur zu neuartigen PAN-basierten Precursoren verringert werden. Um den PAN-co-MEA-Precursor für die nachfolgenden Prozessschritte der Carbonfaserherstellung zu verwenden, müssen die thermoplastischen Fasern in thermisch stabile Fasern ohne thermoplastisches Verhalten überführt werden. Es wurde ein neuer Prozessschritt (Prästabilisierung) eingeführt, welcher unter alkalischen Bedingungen zur Abspaltung der Comonomerseitenkette führt. Neben der Esterhydrolyse finden Reaktionen statt, welche an diesem Material noch nicht hinreichend untersucht wurden. Weiterhin stellt sich die Frage nach der Kinetik der Prästabilisierung und der Ermittlung einer geeigneten Prozessführung.
Hierzu wurde die Prästabilisierung in den Labormaßstab überführt und die möglichen Zusammensetzungen des aus DMSO und einer KOH-Lösung bestehenden Reaktionsmediums evaluiert. Weiterhin wurde die Behandlung bei verschiedenen Prästabilisierungszeiten von maximal 30 min und Temperaturen von 40, 50 und 60 °C durchgeführt, um primär mittels NMR-Spektroskopie die chemischen Strukturänderungen aufzuklären. Die Esterhydrolyse des Comonomers, welche zur Abspaltung des 2-Methoxyethanols führt, wurde mittels 1H-NMR-spektroskopischer Untersuchungen detektiert.
Es wurde ein Modell aufgestellt, das die chemisch-physikalischen Strukturänderungen während der Prästabilisierung aufzeigt. Die zuerst ablaufende Reaktion ist die Esterhydrolyse am Comonomer, welche vom Faserrand nach innen verläuft und durch die Präsenz des DMSO in Kombination mit der KOH-Lösung (Superbase) initiiert wird. Der zeitliche Reaktionsverlauf der Esterhydrolyse kann in drei Bereiche eingeteilt werden. Der erste Bereich ab dem Prästabilisierungsbeginn wird durch die Diffusion der basischen Anionen in die Faser, der zweite Bereich durch die Reaktion an der Estergruppe des Comonomers und der dritte Bereich durch letzte Reaktionen im Faserinneren und diffusiven Prozessen der Produkte und Edukte charakterisiert. Der zweite Bereich kann mit einer Reaktion pseudo 1. Ordnung abgebildet werden, da in diesem Bereich bereits eine ausreichende Diffusion der Edukte in die Faser stattgefunden hat. Bei 50 °C spielt die Diffusion im ersten Bereich im Vergleich zur Reaktion eine untergeordnete Rolle. Mit Erhöhung der Temperatur auf 60 °C kann eine im Verhältnis geringere Diffusions- als Reaktionsgeschwindigkeit beobachtet werden. Die Nebenreaktionen wurden mittels 13C-CP/MAS-NMR-spektroskopischen, elementaranlaytischen Untersuchungen sowie Doppelbrechungsmessungen charakterisiert. Während der alkalischen Esterhydrolyse beginnt die Reduzierung der Nitrilgruppen unter der Bildung von primären Carbonsäureamiden und Carbonsäuren. Zur Beschreibung dieser Umsetzung wurde eine Methode entwickelt, welche die Addition von 13C-CP/MAS-NMR-Spektren der Modellsubstanzen PAN, PAM und PAA beinhaltet. Weitere stattfindende Reaktionen sind die Bildung von konjugierten Doppelbindungen, welche insbesondere auf eine Zyklisierung der Nitrile hinweisen. Die nasschemisch initiierte Zyklisierung der Nitrilgruppen kann zu kürzeren Stabilisierungszeiten und einem besser kontrollierbaren Stabilisierungsprozess durch geringere Wärmefreisetzung und schlussendlich zu einer Kostenersparnis des gesamten Verfahrens führen. Die Umsetzung der Nitrilgruppen konnte mit einer Reaktion pseudo 1. Ordnung gut abgebildet werden. DMSO initiiert die Esterhydrolyse, wobei die KOH-Konzentration einen höheren Einfluss auf die Reaktionsgeschwindigkeit der Ester- und Nitrilhydrolyse als die DMSO-Konzentration besitzt. Beide Reaktionen zeigen eine vergleichbare Abhängigkeit von der Temperatur. Die Erhöhung der Prästabilisierungszeit und der KOH- bzw. DMSO-Konzentration führt zur Migration niedermolekularer Bestandteile des Fasermaterials an die Oberfläche und der Bildung punktueller Ablagerungen bis hin zu miteinander verbundenen Einzelfasern. Eine weitere Erhöhung der Prästabilisierungszeit bzw. der Konzentration führt zu einem steigenden Carbonsäureanteil und zur Quellung des Fasermaterials, wodurch die Ablagerungen in das Reaktionsmedium diffundieren. Die Ablagerungen enthalten Chlor, welches durch den Waschvorgang mit HCl in das Materialsystem gelangt ist und durch Parameteranpassungen reduziert wurde. Die schmelzbaren Fasern konnten durch die Prästabilisierung erfolgreich über eine Kern-Mantel-Struktur in nicht-thermoplastische Fasern überführt werden.
Zur Ermittlung eines geeigneten Prozessfensters für nachfolgende thermische Beanspruchungen der prästabilisierten Fasern wurden drei Kriterien identifiziert, anhand welcher die Evaluation erfolgte. Das erste Kriterium beinhaltet die Notwendigkeit der vollständigen Aufhebung der thermoplastischen Eigenschaft der Fasern. Als zweites Kriterium diente die Fasermorphologie. Anhand von REM-Aufnahmen wurden Faserbündel mit separierten Einzelfasern ohne Ablagerungen für die nachfolgende Stabilisierung ausgewählt. Das dritte Kriterium bezieht sich auf eine möglichst geringe Umsetzung der Nitrilgruppen, um Prästabilisierungsbedingungen mit Nebenreaktionen zu vermeiden.
Aus den Untersuchungen konnte eine Prästabilisierungstemperatur von 60 °C als geeignet identifiziert werden. Weiterhin führen hoch alkalische Zusammensetzungen des Reaktionsmediums mit KOH-Konzentrationen von 1, 1,5 und 2 M, vorzugsweise 1,5 M und 50 vol% DMSO mit Reaktionszeiten von unter 10 min zu geeigneten Fasern. Ein MEA-Anteil unterhalb von 2 mol% bewirkt eine Überführung in die Unschmelzbarkeit. Thermisch stabile und für die nachfolgende Stabilisierung geeignete Fasern besitzen weiterhin 68 – 80 mol% Nitrilgruppen, 20 – 25 mol% Carbonsäuren, bis zu 15 mol% primäre Carbonsäureamide und zyklisierte Strukturen.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
Electrets are dielectrics with quasi-permanent electric charge and/or dipoles, sometimes can be regarded as an electric analogy to a magnet. Since the discovery of the excellent charge retention capacity of poly(tetrafluoro ethylene) and the invention of the electret microphone, electrets have grown out of a scientific curiosity to an important application both in science and technology. The history of electret research goes hand in hand with the quest for new materials with better capacity at charge and/or dipole retention. To be useful, electrets normally have to be charged/poled to render them electro-active. This process involves electric-charge deposition and/or electric dipole orientation within the dielectrics ` surfaces and bulk. Knowledge of the spatial distribution of electric charge and/or dipole polarization after their deposition and subsequent decay is crucial in the task to improve their stability in the dielectrics.
Likewise, for dielectrics used in electrical insulation applications, there are also needs for accumulated space-charge and polarization spatial profiling. Traditionally, space-charge accumulation and large dipole polarization within insulating dielectrics is considered undesirable and harmful to the insulating dielectrics as they might cause dielectric loss and could lead to internal electric field distortion and local field enhancement. High local electric field could trigger several aging processes and reduce the insulating dielectrics' lifetime. However, with the advent of high-voltage DC transmission and high-voltage capacitor for energy storage, these are no longer the case. There are some overlapped between the two fields of electrets and electric insulation. While quasi-permanently trapped electric-charge and/or large remanent dipole polarization are the requisites for electret operation, stably trapped electric charge in electric insulation helps reduce electric charge transport and overall reduced electric conductivity. Controlled charge trapping can help in preventing further charge injection and accumulation as well as serving as field grading purpose in insulating dielectrics whereas large dipole polarization can be utilized in energy storage applications.
In this thesis, the Piezoelectrically-generated Pressure Steps (PPSs) were employed as a nondestructive method to probe the electric-charge and dipole polarization distribution in a range of thin film (several hundred micron) polymer-based materials, namely polypropylene (PP), low-density polyethylene/magnesium oxide (LDPE/MgO) nanocomposites and poly(vinylidene fluoride-co- trifluoro ethylene) (P(VDF-TrFE)) copolymer. PP film surface-treated with phosphoric acid to introduce surfacial isolated nanostructures serves as example of 2-dimensional nano-composites whereas LDPE/MgO serves as the case of 3-dimensional nano-composites with MgO nano-particles dispersed in LDPE polymer matrix. It is evidenced that the nanoparticles on the surface of acid-treated PP and in the bulk of LDPE/MgO nanocomposites improve charge trapping capacity of the respective material and prevent further charge injection and transport and that the enhanced charge trapping capacity makes PP and LDPE/MgO nanocomposites potential materials for both electret and electrical insulation applications. As for PVDF and VDF-based copolymers, the remanent spatial polarization distribution depends critically on poling method as well as specific parameters used in the respective poling method. In this work, homogeneous polarization poling of P(VDF-TrFE) copolymers with different VDF-contents have been attempted with hysteresis cyclical poling. The behaviour of remanent polarization growth and spatial polarization distribution are reported and discussed. The Piezoelectrically-generated Pressure Steps (PPSs) method has proven as a powerful method for the charge storage and transport characterization of a wide range of polymer material from nonpolar, to polar, to polymer nanocomposites category.
Ultrafast magnetisation dynamics have been investigated intensely for two decades. The recovery process after demagnetisation, however, was rarely studied experimentally and discussed in detail. The focus of this work lies on the investigation of the magnetisation on long timescales after laser excitation. It combines two ultrafast time resolved methods to study the relaxation of the magnetic and lattice system after excitation with a high fluence ultrashort laser pulse. The magnetic system is investigated by time resolved measurements of the magneto-optical Kerr effect. The experimental setup has been implemented in the scope of this work. The lattice dynamics were obtained with ultrafast X-ray diffraction. The combination of both techniques leads to a better understanding of the mechanisms involved in magnetisation recovery from a non-equilibrium condition. Three different groups of samples are investigated in this work: Thin Nickel layers capped with nonmagnetic materials, a continuous sample of the ordered L10 phase of Iron Platinum and a sample consisting of Iron Platinum nanoparticles embedded in a carbon matrix. The study of the remagnetisation reveals a general trend for all of the samples: The remagnetisation process can be described by two time dependences. A first exponential recovery that slows down with an increasing amount of energy absorbed in the system until an approximately linear time dependence is observed. This is followed by a second exponential recovery. In case of low fluence excitation, the first recovery is faster than the second. With increasing fluence the first recovery is slowed down and can be described as a linear function. If the pump-induced temperature increase in the sample is sufficiently high, a phase transition to a paramagnetic state is observed. In the remagnetisation process, the transition into the ferromagnetic state is characterised by a distinct transition between the linear and exponential recovery. From the combination of the transient lattice temperature Tp(t) obtained from ultrafast X-ray measurements and magnetisation M(t) gained from magneto-optical measurements we construct the transient magnetisation versus temperature relations M(Tp). If the lattice temperature remains below the Curie temperature the remagnetisation curve M(Tp) is linear and stays below the M(T) curve in equilibrium in the continuous transition metal layers. When the sample is heated above phase transition, the remagnetisation converges towards the static temperature dependence. For the granular Iron Platinum sample the M(Tp) curves for different fluences coincide, i.e. the remagnetisation follows a similar path irrespective of the initial laser-induced temperature jump.
Due to advances in science and technology towards smaller and more powerful processing units, the fabrication of micrometer sized machines for different tasks becomes more and more possible. Such micro-robots could revolutionize medical treatment of diseases and shall support to work on other small machines. Nevertheless, scaling down robots and other devices is a challenging task and will probably remain limited in near future. Over the past decade the concept of bio-hybrid systems has proved to be a promising approach in order to advance the further development of micro-robots. Bio-hybrid systems combine biological cells with artificial components, thereby benefiting from the functionality of living biological cells. Cell-driven micro-transport is one of the most prominent applications in the emerging field of these systems. So far, micrometer sized cargo has been successfully transported by means of swimming bacterial cells. The potential of motile adherent cells as transport systems has largely remained unexplored.
This thesis concentrates on the social amoeba Dictyostelium discoideum as a potential candidate for an amoeboid bio-hybrid transport system. The use of this model organism comes with several advantages. Due to the unspecific properties of Dictyostelium adhesion, a wide range of different cargo materials can be used for transport. As amoeboid cells exceed bacterial cells in size by one order of magnitude, also the size of an object carried by a single cell can also be much larger for an amoeba. Finally it is possible to guide the cell-driven transport based on the chemotactic behavior of the amoeba. Since cells undergo a developmentally induced chemotactic aggregation, cargo could be assembled in a self-organized manner into a cluster. It is also possible to impose an external chemical gradient to guide the amoeboid transport system to a desired location.
To establish Dictyostelium discoideum as a possible candidate for bio-hybrid transport systems, this thesis will first investigate the movement of single cells. Secondly, the interaction of cargo and cells will be studied. Eventually, a conceptional proof will be conducted, that the cheomtactic behavior can be exploited either to transport a cargo self-organized or through an external chemical source.
Supermassive black holes reside in the hearts of almost all massive galaxies. Their evolutionary path seems to be strongly linked to the evolution of their host galaxies, as implied by several empirical relations between the black hole mass (M BH ) and different host galaxy properties. The physical driver of this co-evolution is, however, still not understood. More mass measurements over homogeneous samples and a detailed understanding of systematic uncertainties are required to fathom the origin of the scaling relations.
In this thesis, I present the mass estimations of supermassive black holes in the nuclei of one late-type and thirteen early-type galaxies. Our SMASHING sample extends from the intermediate to the massive galaxy mass regime and was selected to fill in gaps in number of galaxies along the scaling relations. All galaxies were observed at high spatial resolution, making use of the adaptive-optics mode of integral field unit (IFU) instruments on state-of-the-art telescopes (SINFONI, NIFS, MUSE). I extracted the stellar kinematics from these observations and constructed dynamical Jeans and Schwarzschild models to estimate the mass of the central black holes robustly. My new mass estimates increase the number of early-type galaxies with measured black hole masses by 15%. The seven measured galaxies with nuclear light deficits (’cores’) augment the sample of cored galaxies with measured black holes by 40%. Next to determining massive black hole masses, evaluating the accuracy of black hole masses is crucial for understanding the intrinsic scatter of the black hole- host galaxy scaling relations. I tested various sources of systematic uncertainty on my derived mass estimates.
The M BH estimate of the single late-type galaxy of the sample yielded an upper limit, which I could constrain very robustly. I tested the effects of dust, mass-to-light ratio (M/L) variation, and dark matter on my measured M BH . Based on these tests, the typically assumed constant M/L ratio can be an adequate assumption to account for the small amounts of dark matter in the center of that galaxy. I also tested the effect of a variable M/L variation on the M BH measurement on a second galaxy. By considering stellar M/L variations in the dynamical modeling, the measured M BH decreased by 30%. In the future, this test should be performed on additional galaxies to learn how an as constant assumed M/L flaws the estimated black hole masses.
Based on our upper limit mass measurement, I confirm previous suggestions that resolving the predicted BH sphere-of-influence is not a strict condition to measure black hole masses. Instead, it is only a rough guide for the detection of the black hole if high-quality, and high signal-to-noise IFU data are used for the measurement. About half of our sample consists of massive early-type galaxies which show nuclear surface brightness cores and signs of triaxiality. While these types of galaxies are typically modeled with axisymmetric modeling methods, the effects on M BH are not well studied yet. The massive galaxies of our presented galaxy sample are well suited to test the effect of different stellar dynamical models on the measured black hole mass in evidently triaxial galaxies. I have compared spherical Jeans and axisymmetric Schwarzschild models and will add triaxial Schwarzschild models to this comparison in the future. The constructed Jeans and Schwarzschild models mostly disagree with each other and cannot reproduce many of the triaxial features of the galaxies (e.g., nuclear sub-components, prolate rotation). The consequence of the axisymmetric-triaxial assumption on the accuracy of M BH and its impact on the black hole - host galaxy relation needs to be carefully examined in the future.
In the sample of galaxies with published M BH , we find measurements based on different dynamical tracers, requiring different observations, assumptions, and methods. Crucially, different tracers do not always give consistent results. I have used two independent tracers (cold molecular gas and stars) to estimate M BH in a regular galaxy of our sample. While the two estimates are consistent within their errors, the stellar-based measurement is twice as high as the gas-based. Similar trends have also been found in the literature. Therefore, a rigorous test of the systematics associated with the different modeling methods is required in the future. I caution to take the effects of different tracers (and methods) into account when discussing the scaling relations.
I conclude this thesis by comparing my galaxy sample with the compilation of galaxies with measured black holes from the literature, also adding six SMASHING galaxies, which were published outside of this thesis. None of the SMASHING galaxies deviates significantly from the literature measurements. Their inclusion to the published early-type galaxies causes a change towards a shallower slope for the M BH - effective velocity dispersion relation, which is mainly driven by the massive galaxies of our sample. More unbiased and homogenous measurements are needed in the future to determine the shape of the relation and understand its physical origin.