Fiber optic plasmonic sensors
- A simple, convenient, and inexpensive method to fabricate optical fiber based biosensors which utilize periodic hole arrays in gold films for signal transduction is reported. The process of hole array formation mainly relies on self-assembly of hydrogel microgels in combination with chemical gold film deposition and subsequent transfer of the perforated film onto an optical fiber tip. In the fabrication process solely chemical wet lab techniques are used, avoiding cost-intensive instrumentation or clean room facilities. The presented method for preparing fiber optic plasmonic sensors provides high throughput and is perfectly suited for commercialization using batch processing. The transfer of the perforated gold film onto an optical fiber tip does not affect the sensitivity of the biosensor ((420 +/- 83) nm/refractive index unit (RIU)), which is comparable to sensitivities of sensor platforms based on periodic hole arrays in gold films prepared by significantly more complex methods. Furthermore, real-time and in-line immunoassayA simple, convenient, and inexpensive method to fabricate optical fiber based biosensors which utilize periodic hole arrays in gold films for signal transduction is reported. The process of hole array formation mainly relies on self-assembly of hydrogel microgels in combination with chemical gold film deposition and subsequent transfer of the perforated film onto an optical fiber tip. In the fabrication process solely chemical wet lab techniques are used, avoiding cost-intensive instrumentation or clean room facilities. The presented method for preparing fiber optic plasmonic sensors provides high throughput and is perfectly suited for commercialization using batch processing. The transfer of the perforated gold film onto an optical fiber tip does not affect the sensitivity of the biosensor ((420 +/- 83) nm/refractive index unit (RIU)), which is comparable to sensitivities of sensor platforms based on periodic hole arrays in gold films prepared by significantly more complex methods. Furthermore, real-time and in-line immunoassay studies with a specially designed 3D printed flow cell are presented exploiting the presented optical fiber based biosensors.…
Verfasserangaben: | Nabarun Polley, Supratim BasakORCiD, Roland HassORCiDGND, Claudia PacholskiORCiDGND |
---|---|
DOI: | https://doi.org/10.1016/j.bios.2019.03.020 |
ISSN: | 0956-5663 |
ISSN: | 1873-4235 |
Pubmed ID: | https://pubmed.ncbi.nlm.nih.gov/30901726 |
Titel des übergeordneten Werks (Englisch): | Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics |
Untertitel (Englisch): | Providing sensitive biosensor platforms with minimal lab equipment |
Verlag: | Elsevier |
Verlagsort: | Oxford |
Publikationstyp: | Wissenschaftlicher Artikel |
Sprache: | Englisch |
Datum der Erstveröffentlichung: | 01.05.2019 |
Erscheinungsjahr: | 2019 |
Datum der Freischaltung: | 01.03.2021 |
Freies Schlagwort / Tag: | 3D printed flow-cell; Biosensor; Bottom-up fabrication; Optical fiber; Surface plasmon resonance |
Band: | 132 |
Seitenanzahl: | 7 |
Erste Seite: | 368 |
Letzte Seite: | 374 |
Fördernde Institution: | German Federal Ministry of Education and Research (BMBF)Federal Ministry of Education & Research (BMBF) [03Z22AN12]; German Research Foundation (DFG)German Research Foundation (DFG) [286735196] |
Organisationseinheiten: | Mathematisch-Naturwissenschaftliche Fakultät / Institut für Chemie |
Peer Review: | Referiert |