TY - THES A1 - Zhou, Shuo T1 - Biological evaluation and sulfation of polymer networks from glycerol glycidyl ether N2 - Cardiovascular diseases are the main cause of death worldwide, and their prevalence is expected to rise in the coming years. Polymer-based artificial replacements have been widely used for the treatment of cardiovascular diseases. Coagulation and thrombus formation on the interfaces between the materials and the human physiological environment are key issues leading to the failure of the medical device in clinical implantation. The surface properties of the materials have a strong influence on the protein adsorption and can direct the blood cell adhesion behavior on the interfaces. Furthermore, implant-associated infections will be induced by bacterial adhesion and subsequent biofilm formation at the implantation site. Thus, it is important to improve the hemocompatibility of an implant by altering the surface properties. One of the effective strategies is surface passivation to achieve protein/cell repelling ability to reduce the risk of thrombosis. This thesis consists of synthesis, functionalization, sterilization, and biological evaluation of bulk poly(glycerol glycidyl ether) (polyGGE), which is a highly crosslinked polyether-based polymer synthesized by cationic ring-opening polymerization. PolyGGE is hypothesized to be able to resist plasma protein adsorption and bacterial adhesion due to analogous chemical structure as polyethylene glycol and hyperbranched polyglycerol. Hydroxyl end groups of polyGGE provide possibilities to be functionalized with sulfates to mimic the anti-thrombogenic function of the endothelial glycocalyx. PolyGGE was synthesized by polymerization of the commercially available monomer glycerol glycidyl ether, which was characterized as a mixture of mono-, di- and tri-glycidyl ether. Cationic ring opening-polymerization of this monomer was carried out by ultraviolet (UV) initiation of the photo-initiator diphenyliodonium hexafluorophosphate. With the increased UV curing time, more epoxides in the side chains of the monomers participated in chemical crosslinking, resulting in an increase of Young’s modulus, while the value of elongation at break of polyGGE first increased due to the propagation of the polymer chains then decreased with the increase of crosslinking density. Eventually, the chain propagation can be effectively terminated by potassium hydroxide aqueous solution. PolyGGE exhibited different tensile properties in hydrated conditions at body temperature compared to the values in the dry state at room temperature. Both Young’s modulus and values of elongation at break were remarkably reduced when tested in water at 37 °C, which was above the glass transition temperature of polyGGE. At physiological conditions, entanglements of the ployGGE networks unfolded and the free volume of networks were replaced by water molecules as softener, which increased the mobility of the polymer chains, resulting in a lower Young’s modulus. Protein adsorption analysis was performed on polyGGE films with 30 min UV curing using an enzyme-linked immunosorbent assay. PolyGGE could effectively prevent the adsorption of human plasma fibrinogen, albumin, and fibronectin at the interface of human plasma and polyGGE films. The protein resistance of polyGGE was comparable to the negative controls: the hemocompatible polydimethylsiloxane (PDMS), showing its potential as a coating material for cardiovascular implants. Moreover, antimicrobial tests of bacterial activity using isothermal microcalorimetry and the microscopic image of direct bacteria culturing demonstrated that polyGGE could directly interfere biofilm formation and growth of both Gram-negative and antibiotic-resistant Gram-positive bacteria, indicating the potential application of polyGGE for combating the risk of hospital-acquired infections and preventing drug-resistant superbug spreading. To investigate its cell compatibility, polyGGE films were extracted by different solvents (ethanol, chloroform, acetone) and cell culture medium. Indirect cytotoxicity tests showed extracted polyGGE films still had toxic effects on L929 fibroblast cells. High-performance liquid chromatography/electrospray ionization mass spectrometry revealed the occurrence of organochlorine-containing compounds released during the polymer-cell culture medium interaction. A constant level of those organochlorine-containing compounds was confirmed from GGE monomer by a specific peak of C-Cl stretching in infrared spectra of GGE. This is assumed to be the main reason causing the increased cell membrane permeability and decreased metabolic activity, leading to cell death. Attempts as changing solvents were made to remove toxic substances, however, the release of these small molecules seems to be sluggish. The densely crosslinked polyGGE networks can possibly contribute to the trapping of organochlorine-containing compounds. These results provide valuable information for exploring the potentially toxic substances, leaching from polyGGE networks, and propose a feasible strategy for minimizing the cytotoxicity via reducing their crosslinking density. Sulfamic acid/ N-Methyl-2-pyrrolidone (NMP) were selected as the reagents for the sulfation of polyGGE surfaces. Fourier transform attenuated total reflection infrared spectroscopy (ATR-FT-IR) was used to monitor the functionalization kinetics and the results confirmed the successful sulfate grafting on the surface of polyGGE with the covalent bond -C-O-S-. X-ray photoelectron spectroscopy was used to determine the element composition on the surface and the cross-section of the functionalized polyGGE and sulfation within 15 min guarantees the sulfation only takes place on the surface while not occurring in the bulk of the polymer. The concentration of grafted sulfates increased with the increasing reaction time. The hydrophilicity of the surface of polyGGE was highly increased due to the increase of negatively charged end groups. Three sterilization techniques including autoclaving, gamma irradiation, and ethylene oxide (EtO) sterilization were used for polyGGE sulfates. Results from ATR-FT-IR and Toluidine Blue O quantitative assay demonstrated the total loss of the sulfates after autoclave sterilization, which was also confirmed by the increased water contact angle. Little influence on the concentration of sulfates was found for gamma-irradiated and autoclaving sterilized polyGGE sulfates. To investigate the thermal influence on polyGGE sulfates, one strategy was to use poly(hydroxyethyl acrylate) sulfates (PHEAS) for modeling. The thermogravimetric analysis profile of PHEAS demonstrated that sulfates are not thermally stable independent of the substrate materials and decomposition of sulfates occurs at around 100 °C. Although gamma irradiation also showed little negative effect on the sulfate content, the color change in the polyGGE sulfates indicates chemical or physical change might occur in the polymer. EtO sterilization was validated as the most suitable sterilization technique to maintain the chemical structure of polyGGE sulfates. In conclusion, the conducted work proved that bulk polyGGE can be used as an antifouling coating material and shows its antimicrobial potential. Sulfates functionalization can be effectively realized using sulfamic acid/NMP. EtO sterilization is the most suitable sterilization technique for grafted sulfates. Besides, this thesis also offers a good strategy for the analysis of toxic leachable substances using suitable physicochemical characterization techniques. Future work will focus on minimizing/eliminating the release of toxic substances via reducing the crosslinking density. Another interesting aspect is to study whether grafted sulfates can meet the need for anti-thrombogenicity. N2 - Herz-Kreislauf-Erkrankungen sind weltweit die Haupttodesursache, und es wird erwartet, dass ihre Prävalenz in den kommenden Jahren zunehmen wird. Künstlicher Ersatz auf Polymerbasis wird in großem Umfang für die Behandlung von Herz-Kreislauf-Erkrankungen eingesetzt. Gerinnung und Thrombenbildung an den Grenzflächen zwischen den Materialien und der menschlichen physiologischen Umgebung sind ein Hauptproblem, das zum Versagen des Medizinprodukts bei der klinischen Implantation führt. Die Oberflächeneigenschaften der Materialien haben einen starken Einfluss auf die Proteinadsorption und können das Adhäsionsverhalten von Blutzellen an den Grenzflächen steuern. Darüber hinaus werden Implantat-assoziierte Infektionen durch bakterielle Adhäsion und anschließende Biofilmbildung an der Implantationsstelle ausgelöst. Daher ist es wichtig, die Hämokompatibilität eines Implantats durch Veränderung der Oberflächeneigenschaften zu verbessern. Eine der wirksamen Strategien ist die Oberflächenpassivierung, um die Fähigkeit zur Protein-/Zellabweisung zu erreichen und so das Thromboserisiko zu verringern. Diese Arbeit befasst sich mit der Synthese, Funktionalisierung, Sterilisation und biologischen Bewertung von Poly(glycerin glycidyl ether) (polyGGE), einem stark vernetzten Polymer auf Polyetherbasis, das durch kationische Ringöffnungspolymerisation hergestellt wird. Es wird angenommen, dass PolyGGE aufgrund seiner ähnlichen chemischen Struktur wie Polyethylenglykol und hyperverzweigtes Polyglycerin der Adsorption von Plasmaproteinen und der Anhaftung von Bakterien widerstehen kann. Die Hydroxyl-Endgruppen von PolyGGE können mit Sulfaten funktionalisiert werden, um die antithrombogene Funktion der endothelialen Glykokalyx zu imitieren. PolyGGE wurde durch Polymerisation des kommerziell erhältlichen Monomers Glycerin Glycidyl ether synthetisiert, das als Mischung aus Mono-, Di- und Triglycidylether charakterisiert wurde. Die kationische Ringöffnungspolymerisation dieses Monomers wurde mit Hilfe des Photoinitiators Diphenyliodoniumhexafluorophosphat durch Ultraviolett (UV) ausgelöst. Mit zunehmender UV-Härtungszeit nahmen mehr Epoxide in den Seitenketten der Monomere an der chemischen Vernetzung teil, was zu einem Anstieg des Elastizitätsmoduls führte, während der Wert der Bruchdehnung von polyGGE zunächst aufgrund der Ausbreitung der Polymerketten anstieg und dann mit zunehmender Vernetzungsdichte abnahm. Schließlich kann die Kettenausbreitung durch wässrige Kaliumhydroxidlösung wirksam gestoppt werden. PolyGGE wies im hydratisierten Zustand bei Körpertemperatur andere Zugeigenschaften auf als im trockenen Zustand bei Raumtemperatur. Sowohl der Elastizitätsmodul als auch die Werte der Bruchdehnung waren deutlich reduziert, wenn sie in Wasser bei 37 °C getestet wurden, was oberhalb der Glasübergangstemperatur von PolyGGE lag. Unter physiologischen Bedingungen entfalteten sich die Verflechtungen der PolyGGE-Netzwerke und das freie Volumen der Netzwerke wurde durch Wassermoleküle als Weichmacher ersetzt, was die Mobilität der Polymerketten erhöhte und zu einem niedrigeren Elastizitätsmodul führte. Die Proteinadsorptionsanalyse wurde an PolyGGE-Filmen mit 30-minütiger UV-Härtung unter Verwendung eines Enzymimmunoassays durchgeführt. PolyGGE konnte die Adsorption von Fibrinogen, Albumin und Fibronektin aus menschlichem Plasma an der Grenzfläche zwischen menschlichem Plasma und PolyGGE-Filmen wirksam verhindern. Die Proteinresistenz von PolyGGE war vergleichbar mit den Negativkontrollen: dem hämokompatiblen Polydimethylsiloxan, was sein Potenzial als Beschichtungsmaterial für kardiovaskuläre Implantate zeigt. Darüber hinaus zeigten antimikrobielle Tests der bakteriellen Aktivität mittels isothermischer Mikrokalorimetrie und das mikroskopische Bild der direkten Bakterienkultur, dass PolyGGE die Biofilmbildung und das Wachstum sowohl von gramnegativen als auch von antibiotikaresistenten grampositiven Bakterien direkt stören kann, was auf die potenzielle Anwendung von PolyGGE zur Bekämpfung des Risikos von Krankenhausinfektionen und zur Verhinderung der Ausbreitung arzneimittelresistenter Superbugs hinweist. Um die Zellkompatibilität zu untersuchen, wurden polyGGE-Folien mit verschiedenen Lösungsmitteln (Ethanol, Chloroform, Aceton) und Zellkulturmedium extrahiert. Indirekte Zytotoxizitätstests zeigten, dass die extrahierten polyGGE-Filme immer noch eine toxische Wirkung auf L929-Fibroblastenzellen hatten. Die Hochleistungsflüssigkeitschromatographie/Elektrospray-Ionisations-Massenspektrometrie zeigte das Auftreten von chlororganischen Derivaten, die während der Interaktion zwischen Polymer und Zellkulturmedium freigesetzt wurden. Ein konstantes Niveau dieser chlororganischen Derivate wurde vom GGE-Monomer durch einen spezifischen C-Cl-Streckungspeak im Infrarotspektrum von GGE bestätigt. Es wird angenommen, dass dies der Hauptgrund für die erhöhte Permeabilität der Zellmembran und die verringerte Stoffwechselaktivität ist, was zum Zelltod führt. Es wurden Versuche unternommen, die Lösungsmittel zu wechseln, um die toxischen Substanzen zu entfernen, aber die Freisetzung dieser kleinen Moleküle scheint nur langsam zu erfolgen. Die dicht vernetzten polyGGE-Netzwerke können möglicherweise zum Einschluss chloridhaltiger Verbindungen beitragen. Diese Ergebnisse liefern wertvolle Informationen für die Erforschung potenzieller toxischer Substanzen, die aus PolyGGE-Netzwerken ausgewaschen werden, und schlagen eine praktikable Strategie zur Minimierung der Zytotoxizität durch Verringerung der Vernetzungsdichte vor. Als Reagenzien für die Sulfatierung von PolyGGE-Oberflächen wurden Sulfaminsäure und N-Methyl-2-Pyrrolidon (NMP) gewählt. Die Fourier-Transformations-Infrarotspektroskopie mit abgeschwächter Totalreflexion (ATR-FT-IR) wurde zur Überwachung der Funktionalisierungskinetik eingesetzt, und die Ergebnisse bestätigten die erfolgreiche Sulfatpfropfung auf der Oberfläche von PolyGGE mit der kovalenten Bindung -C-O-S-. Mit Hilfe der Röntgen-Photoelektronenspektroskopie wurde die Elementzusammensetzung auf der Oberfläche und der Querschnitt des funktionalisierten PolyGGE bestimmt, und die Sulfatierung innerhalb von 15 Minuten garantiert, dass die Sulfatierung nur auf der Oberfläche stattfindet, während sie in der Masse des Polymers nicht vorkommt. Die Konzentration der gepfropften Sulfate nahm mit zunehmender Reaktionszeit zu. Die Hydrophilie der Oberfläche von polyGGE wurde durch die Zunahme negativ geladener Endgruppen stark erhöht. Für die PolyGGE-Sulfate wurden drei Sterilisationstechniken verwendet: Autoklavieren, Gammastrahlenbestrahlung und Ethylenoxid (EtO)-Sterilisation. Die Ergebnisse der quantitativen ATR-FT-IR und Toluidinblau O-Untersuchung zeigten den vollständigen Verlust der Sulfate nach der Sterilisation im Autoklaven, was auch durch den erhöhten Wasserkontaktwinkel bestätigt wurde. Bei den mit Gammastrahlen und im Autoklaven sterilisierten PolyGGE-Sulfaten wurde nur ein geringer Einfluss auf die Sulfatkonzentration festgestellt. Um den thermischen Einfluss auf PolyGGE-Sulfate zu untersuchen, bestand eine Strategie darin, ein Poly(hydroxyethylacrylat)-Sulfat (PHEAS) für die Modellierung zu verwenden. Das Profil der thermogravimetrischen Analyse von PHEAS zeigte, dass Sulfate unabhängig von den Substratmaterialien thermisch nicht stabil sind und die Zersetzung der Sulfate bei etwa 100 °C stattfindet. Obwohl die Gammasterilisation ebenfalls kaum negative Auswirkungen auf den Sulfatgehalt hat, deutet die Farbveränderung der PolyGGE-Sulfate darauf hin, dass chemische oder physikalische Veränderungen im Polymer auftreten könnten. Die EtO-Sterilisation erwies sich als die am besten geeignete Sterilisationstechnik, um die chemische Struktur der PolyGGE-Sulfate zu erhalten. Zusammenfassend lässt sich sagen, dass die durchgeführte Arbeit bewiesen hat, dass PolyGGE als Antifouling-Beschichtungsmaterial verwendet werden kann und sein antimikrobielles Potenzial zeigt. Die Funktionalisierung der Sulfate kann mit Sulfaminsäure/NMP effektiv durchgeführt werden. Die EtO-Sterilisation ist die am besten geeignete Sterilisationstechnik für gepfropfte Sulfate. Darüber hinaus bietet diese Arbeit auch eine gute Strategie für die Analyse toxischer auslaugbarer Substanzen mit Hilfe geeigneter physikalisch-chemischer Charakterisierungstechniken. Zukünftige Arbeiten werden sich darauf konzentrieren, die Freisetzung toxischer Substanzen durch Verringerung der Vernetzungsdichte zu minimieren bzw. zu eliminieren. Ein weiterer interessanter Aspekt ist die Untersuchung, ob gepfropfte Sulfate den Anforderungen an die Anti-Thrombogenität gerecht werden können. KW - Sulfation KW - Antifouling KW - antimicrobial KW - Polyether Y1 - 2022 ER - TY - THES A1 - Neuharth, Derek T1 - Evolution of divergent and strike-slip boundaries in response to surface processes T1 - Die Entwicklung divergenter und transversaler Plattengrenzen unter dem Einfluss von Erdoberflächenprozessen N2 - Plate tectonics describes the movement of rigid plates at the surface of the Earth as well as their complex deformation at three types of plate boundaries: 1) divergent boundaries such as rift zones and mid-ocean ridges, 2) strike-slip boundaries where plates grind past each other, such as the San Andreas Fault, and 3) convergent boundaries that form large mountain ranges like the Andes. The generally narrow deformation zones that bound the plates exhibit complex strain patterns that evolve through time. During this evolution, plate boundary deformation is driven by tectonic forces arising from Earth’s deep interior and from within the lithosphere, but also by surface processes, which erode topographic highs and deposit the resulting sediment into regions of low elevation. Through the combination of these factors, the surface of the Earth evolves in a highly dynamic way with several feedback mechanisms. At divergent boundaries, for example, tensional stresses thin the lithosphere, forcing uplift and subsequent erosion of rift flanks, which creates a sediment source. Meanwhile, the rift center subsides and becomes a topographic low where sediments accumulate. This mass transfer from foot- to hanging wall plays an important role during rifting, as it prolongs the activity of individual normal faults. When rifting continues, continents are eventually split apart, exhuming Earth’s mantle and creating new oceanic crust. Because of the complex interplay between deep tectonic forces that shape plate boundaries and mass redistribution at the Earth’s surface, it is vital to understand feedbacks between the two domains and how they shape our planet. In this study I aim to provide insight on two primary questions: 1) How do divergent and strike-slip plate boundaries evolve? 2) How is this evolution, on a large temporal scale and a smaller structural scale, affected by the alteration of the surface through erosion and deposition? This is done in three chapters that examine the evolution of divergent and strike-slip plate boundaries using numerical models. Chapter 2 takes a detailed look at the evolution of rift systems using two-dimensional models. Specifically, I extract faults from a range of rift models and correlate them through time to examine how fault networks evolve in space and time. By implementing a two-way coupling between the geodynamic code ASPECT and landscape evolution code FastScape, I investigate how the fault network and rift evolution are influenced by the system’s erosional efficiency, which represents many factors like lithology or climate. In Chapter 3, I examine rift evolution from a three-dimensional perspective. In this chapter I study linkage modes for offset rifts to determine when fast-rotating plate-boundary structures known as continental microplates form. Chapter 4 uses the two-way numerical coupling between tectonics and landscape evolution to investigate how a strike-slip boundary responds to large sediment loads, and whether this is sufficient to form an entirely new type of flexural strike-slip basin. N2 - Plattentektonik beschreibt die Bewegung starrer tektonischer Platten an der Erdoberfläche sowie deren komplexe Deformation an drei Arten von Plattengrenzen: 1) divergenten Grenzen wie Grabenbrüchen und mittelozeanische Rücken, 2) transversalen Grenzen, an denen Platten gegeneinander verschoben werden, wie die San-Andreas-Verwerfung, und 3) konvergenten Grenzen, die große Gebirgszüge wie die Anden bilden. Diese schmalen Deformationszonen, die Platten begrenzen, weisen meist komplexe Dehnungsmuster auf, die sich im Laufe der Zeit entwickeln. Während dieser Entwicklung wird die Verformung der Plattengrenzen durch tektonische Kräfte aus dem tiefen Erdinneren und der Lithosphäre, aber auch durch Oberflächenprozesse, welche topografische Erhebungen erodieren und die daraus resultierenden Sedimente in tiefer gelegenen Gebieten ablagern, angetrieben. Durch das Zusammenwirken und die Rückkopplung dieser Faktoren entwickelt sich die Erdoberfläche in einer extrem dynamischen Art und Weise. An divergenten Grenzen beispielsweise dünnen Zugspannungen die Lithosphäre aus, was zu einer Hebung und anschließenden Erosion der Flanken eines Grabenbruchs führt, wobei wiederum Sedimente freigesetzt werden. Währenddessen sinkt das Zentrum des Grabens ab und wird zu einer topografischen Senke, in der sich Sedimente ablagern. Diese Massenumverteilung vom Fuß zum Hang einer Verwerfung spielt eine wichtige Rolle, da er die Aktivität einzelner Verwerfungen verlängert. Durch anhaltende Divergenz werden Kontinente schließlich auseinandergerissen, wodurch der Erdmantel an die Erdoberfläche gefördert und neue ozeanische Kruste gebildet wird. Aufgrund des komplexen Zusammenspiels zwischen tektonischen Kräften aus dem tiefen Erdinneren und der Massenumverteilung an der Erdoberfläche ist es von entscheidender Bedeutung, die Rückkopplungen zwischen diesen beiden Bereichen zu verstehen. In dieser Studie möchte ich Einblicke zu zwei Hauptfragen geben: 1) Wie entwickeln sich divergierende Plattengrenzen? 2) Wie wird diese Entwicklung auf einer großen zeitlichen und einer kleinen strukturellen Skala durch die Veränderung der Oberfläche durch Erosion und Sedimentation beeinflusst? In drei Kapiteln untersuche ich die Entwicklung von divergenten und streichenden Plattengrenzen anhand numerischer Modelle. In Kapitel 2 wird die Entwicklung von Grabenbrüchen anhand zweidimensionaler Modelle im Detail erforscht. Dabei extrahiere ich Verwerfungen aus einer Reihe von Modellen und korreliere sie über die Zeit, um zu untersuchen, wie sich Verwerfungsnetzwerke räumlich und zeitlich entwickeln. Durch die bidirektionale Kopplung des Geodynamik-Codes ASPECT und des Erdoberflächen-Codes FastScape untersuche ich, wie diese Verwerfungsnetzwerk und der Grabenbruch im Allgemeinen durch die Erosionseffizienz des Systems, welche viele Faktoren wie Lithologie oder Klima abbildet, beeinflusst werden. In Kapitel 3 untersuche ich die Entwicklung eines Grabenbruchs aus einer dreidimensionalen Perspektive. In diesem Kapitel analysiere ich wie sich gegeneinander versetzte Grabenbrüche verbinden und wann sich dabei schnell rotierende kontinentale Mikroplatten bilden. In Kapitel 4 nutze ich die entwickelte bidirektionale Kopplung zwischen Geodynamik und Erdoberflächenprozessen, um zu verstehen, wie transversale Plattengrenzen auf Sedimentlasten reagieren und ob die ausreicht, um einen völlig neue Art von Sedimentbecken in dieser Umgebung zu formen. KW - geodynamics KW - numerical modelling KW - rift KW - strike-slip KW - surface processes KW - microplate KW - FastScape KW - ASPECT KW - ASPECT KW - FastScape KW - Geodynamik KW - Mikroplatte KW - numerische Modellierung KW - Rift KW - Blattverschiebung KW - Oberflächenprozesse Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549403 ER - TY - THES A1 - Zeuschner, Steffen Peer T1 - Magnetoacoustics observed with ultrafast x-ray diffraction N2 - In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons. N2 - In der vorliegenden Arbeit untersuche ich die Gitterdynamik von magnetisch geordneten und dünnen Filmen, deren Spinsystem mit Femtosekunden-Laserpulsen angeregt und untersucht wird. Die Quantifizierung der laserinduzierten thermischen Dynamik, der erzeugten Pikosekunden-Schallpulse sowie deren jeweiliger Einfluss auf die Magnetisierungsdynamik ist ein schwieriges Unterfangen. Umso mehr ist die Entwicklung und Anwendung von effizienten experimentellen Konzepten und umfangreichen Modellen grundlegend für das Antreiben des zukünftigen wissenschaftlichen und technologischen Fortschritt. In jedem Experiment dieser kummulativen Dissertation untersuche ich das Kristallgitter von Nanometer dünnen Filmen nach der Anregung mit Femtosekunden-Laserpulsen. Die relative Änderung der Gitterkonstante, hervorgerufen durch thermische Ausdehnung oder Pikosekunden-Schallpulse, wird dabei direkt mittels ultraschneller Röntgenbeugung (UXRD) gemessen. Der Aufbau nutzt zur Bereitstellung von ultrakurzen Röntgenpulsen eine lasergetriebene Plasma-Röntgenquelle (PXS). Phononen und Spins üben gleichermaßen einen Druck auf das Gitter aus, welches entsprechend der elastsischen Eigenschaften des Materials reagiert, was das Gitter zu einem vielseitigen Sensor für ultraschenlle Wechselwirkungen macht. Zum einen untersuche ich Materialien mit starken magnetoelastischen Eigentschaften: die stark magnetostriktive Seltenen-Erden-Verbindung TbFe2, elementares Dysprosium oder das technologisch relavante Invar-Material FePt. Zum anderen habe ich eine umfangreiche Studie der Gitterdynamik von Bi1Y2Fe5O12 (Bi:YIG) angestellt, in dem der Literatur zufolge hochfrequente kohärente Spindynamiken durch Femtosekunden-Laseranregung zu beobachten sind. Diese stehenden Spinwellen (SSWs) höherer Ordnung entstehen durch die kohärente und inkohärente Bewegung von Atomen, in anderen Worten Phononen, welche ich durch UXRD vermessen habe. Somit sind wir in der Lage, die experimentellen Beobachtungen der Gitter- und Spindynamik qualitativ und quantitativ zu vereinigen. Dies geschieht durch eine Kombination von Viel-Temperatur- und Anisotropiemodellierung sowie elastische, magnetoelastische, und mikromagnetsiche Modelle. Die gemeinsamen Daten von UXRD und der zeitaufgelösten magnetooptischen Kerr-Effekt Messungen (tr-MOKE), um jeweils die Gitter- und Spindynamik zu messen, wurden in der Vergangenheit noch an unterschiedlichen experimentellen Aufbauten gemessen. Um die Quantifizierung präziser zu gestalten, haben wir in unserer Arbeitsgruppe UXRD und tr-MOKE in einem einzigen Aufbau kombiniert, welcher somit meines Wissens der erste seiner Art ist. Ich half bei dem Entwurf und der Inbetriebnahme des neuen Aufbaus, welcher die gleichzeitige Messung von Gitter- und Spindynamik auf einer ultraschnellen Zeitskala unter identischen Anregungsbedingungen ermöglicht. Außerdem entwickelte ich eine neue Messroutine für Röntgenbeugung, welche die Messzeit von UXRD-Experimenten um bis zu einer Größenordnungen reduziert. Es nennt sich das Schneiden des reziproken Raumes (reciprocal space slicing, RSS) und nutzt den Vorteil von Flächendetektoren die Bewegung von Beugungsreflexen zu detektieren, was von einer Änderung der Gitterkonstante einhergeht, ohne zeitintensive Scans der Beugungswinkel mit dem Goniometer durchzuführen. RSS ist besonders nützlich für ultraschnelle Beugungsexperimente, weil die Messzeit an Großgeräten wie Synchrotrons oder Freie Elektronen Laser eine seltene und teure Ressource ist. Darüber hinaus ist RSS nicht zwangsläufig auf die Anwendung in ultraschnellen Experimenten beschränkt und kann sogar auf andere Beugungsexperimente, wie die mit Neutronen und Elektronen, ausgeweitet werden. KW - ultrafast KW - X-ray diffraction KW - thin films KW - magnetoelasticity KW - ultraschnell KW - Röntgenbeugung KW - dünne Filme KW - Magnetoelastizität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-561098 ER - TY - THES A1 - Gunold, Sascha T1 - Abzug unter Beobachtung T1 - Withdrawal under observation BT - Kooperation und Konkurrenz von Bundeswehr und Bundesnachrichtendienst beim Abzug der sowjetischen/russischen Truppen aus Deutschland bis 1994 BT - competition and cooperation of German Armed Forces and Federal Foreign Intelligence Service during withdrawal of Soviet/Russian forces from Germany until 1994 N2 - Mehr als vier Jahrzehnte lang beobachteten die Streitkräfte und Militärnachrichtendienste der NATO-Staaten die sowjetischen Truppen in der DDR. Hierfür übernahm in der Bundesrepublik Deutschland der Bundesnachrichtendienst (BND) die militärische Auslandsaufklärung unter Anwendung nachrichtendienstlicher Mittel und Methoden. Die Bundeswehr betrieb dagegen taktische Fernmelde- und elektronische Aufklärung und hörte vor allem den Funkverkehr der „Gruppe der sowjetischen Streitkräfte in Deutschland“ (GSSD) ab. Mit der Aufstellung einer zentralen Dienststelle für das militärische Nachrichtenwesen, dem Amt für Nachrichtenwesen der Bundeswehr, bündelte und erweiterte zugleich das Bundesministerium für Verteidigung in den 1980er Jahren seine analytischen Kapazitäten. Das Monopol des BND in der militärischen Auslandsaufklärung wurde von der Bundeswehr dadurch zunehmend infrage gestellt. Nach der deutschen Wiedervereinigung am 3. Oktober 1990 befanden sich immer noch mehr als 300.000 sowjetische Soldaten auf deutschem Territorium. Die 1989 in Westgruppe der Truppen (WGT) umbenannte GSSD sollte – so der Zwei-plus-Vier-Vertrag – bis 1994 vollständig abziehen. Der Vertrag verbot auch den drei Westmächten, in den neuen Bundesländern militärisch tätig zu sein. Die für die Militäraufklärung bis dahin unverzichtbaren Militärverbindungsmissionen der Westmächte mussten ihre Dienste einstellen. Doch was geschah mit diesem „alliierten Erbe“? Wer übernahm auf deutscher Seite die Aufklärung der sowjetischen Truppen und wer kontrollierte den Truppenabzug?  Die Studie untersucht die Rolle von Bundeswehr und BND beim Abzug der WGT zwischen 1990 und 1994 und fragt dabei nach Kooperation und Konkurrenz zwischen Streitkräften und Nachrichtendiensten. Welche militärischen und nachrichtendienstlichen Mittel und Fähigkeiten stellte die Bundesregierung zur Bewältigung des Truppenabzugs zur Verfügung, nachdem die westlichen Militärverbindungsmissionen aufgelöst wurden? Wie veränderten sich die Anforderungen an die militärische Auslandsaufklärung des BND? Inwieweit setzten sich Konkurrenz und Kooperation von Bundeswehr und BNDbeim Truppenabzug fort? Welche Rolle spielten dabei die einstigen Westmächte? Die Arbeit versteht sich nicht nur als Beitrag zur Militärgeschichte, sondern auch zur deutschen Nachrichtendienstgeschichte. N2 - The study examines the cooperation and competition between the Federal Defence Forces of Germany (Bundeswehr) and the German Foreign Intelligence Service (Bundesnachichtendienst, BND) during the withdrawal of Soviet Group of Western Forces from Germany 1990-1994. It is a common approach of military and intelligence history also reflecting the decommissioning of Military Liaison Missions of USA, United Kingdom and France (USMLM, BRIXMIS, MMFL). KW - Bundeswehr KW - Bundesnachrichtendienst KW - Gruppe der Sowjetischen Streitkräfte in Deutschland KW - Westgruppe der Truppen KW - Alliierte Militärverbindungsmissionen KW - Nachrichtendienstgeschichte KW - Militärgeschichte KW - Kalter Krieg KW - Wiedervereinigung KW - Bundeswehrkommando Ost KW - Nuklearwaffen KW - Atomwaffen KW - Spionage KW - Truppenabzug KW - allied military liaison missions KW - nuclear weapons KW - Federal Foreign Intelligence Service KW - Federal Armed Forces of Germany KW - Bundeswehrkommando Ost KW - group of Soviet forces in Germany KW - Cold War KW - military history KW - Intelligence history KW - espionage, Intelligence KW - withdrawal of troops KW - western group of forces KW - German reunification Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571977 ER - TY - THES A1 - Michalik-Onichimowska, Aleksandra T1 - Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry N2 - Eine nachhaltigere chemische Industrie erfordert eine Minimierung der Lösungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgeführt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergrößerung des Volumens des Reaktionsmediums geht immer mit der Vergrößerung der Oberfläche einher, die mit dem begrenzenden Gefäß in Kontakt steht. Da das Volumen kubisch, während die Oberfläche quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verhältnis nicht linear zu. Viele an der Grenzfläche zwischen Oberfläche und Flüssigkeit auftretende Phänomene können die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung führt. Die Anwendung von schwebenden Tropfen als behälterlose Reaktionsgefäße bietet eine vielversprechende Möglichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer für die Echtzeitüberwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgefäße fungieren. Das Design des Systems umfasst die berührungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verständnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verständnis dieses Phänomens ist entscheidend, um den Effekt der zeitlichen und räumlichen Auflösung der erzeugten Ionenwolke zu verstehen, die die Auflösung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzflächenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollständig berücksichtigen. Für die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulslängen untersucht, nämlich im ns- und µs-Bereich. Die Bestrahlung über µs-Laserpulse bietet gegenüber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es ermöglichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz führt zu weniger ausgeprägten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld rückgeschlagen, was zum Verlust der Probe führen würde; iii) die milde Laserbestrahlung führt zu einer besseren räumlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Auflösung der detektierten Ionenpakete führt. Schließlich ermöglicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der Nähe des Tropfens ermöglicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu führen. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Moleküle als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgeführt und online überwacht. Für eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten. N2 - One aspect of achieving a more sustainable chemical industry is the minimization of the usage of solvents and chemicals. Thus, optimization and development of chemical processes for large-scale production is favourably performed in small batches. The critical step in this approach is upscaling the batches from the small reaction systems to the large reactors mandatory for cost efficient production in an industrial environment. Scaling up the bulk volume always goes along with increasing the surface where the reaction medium is in contact with the confining vessel. Since volume scales proportional with the cubic dimension while the surface scales quadratic, their ratio is size-dependent. The influence of reaction vessel walls can change the reaction performance. A number of phenomena occurring at the surface-liquid interface can affect reaction rates and yields, resulting in possible difficulties in predicting and extrapolating from small size production scale to large industrial processes. The application of levitated droplets as a containerless reaction vessels provides a promising possibility to avoid the above-mentioned issues. In the presented work, an efficient coupling of acoustically levitated droplets to an ion mobility (IM) spectrometer, operating at ambient conditions, was designed for real-time monitoring of chemical reactions. The design of the system comprises noncontact sampling and ionization of the droplet realised by laser desorption/ionization at 2,94 µm. The scope of the work includes fundamental studies covering understanding of laser irradiation of droplets enclosed in an acoustical field. Understanding of this phenomenon is crucial to comprehending the effects of temporal and spatial resolution of the generated ion plume that influence the resolution of the system. The set-up includes an acoustic trap, laser irradiation and ion manipulation electrostatic lenses operating at high voltage at ambient pressure. The complexity of the design needs to fully be considered for an effective ion transfer at the interface region between the levitated droplet and IM spectrometer. For sampling and ionization, two distinct laser pulse lengths were evaluated, ns and µs. Irradiation via µs laser pulses provides several advantages: i) the droplet volume is not extensively impinged, as in case of ns laser pulses, allowing the sampling of only the small volume of the droplet; ii) the lower fluence results in less pronounced oscillations of the droplet confined in the acoustic field. The droplet will not be dissipated out of the acoustic field leading to loss of the sample; iii) the mild laser irradiation results in better spatial and temporal ion plume confinement, leading to better resolution of the detected ion packets. Finally, this knowledge allows the application of ion optics necessary to induce ion flow between the droplet suspended in the acoustic field and the IM spectrometer. The ion optics, composed of 2 electrostatic lenses placed in the near vicinity of the droplet, allow effective focusing of the ion plume and its redirection directly to the IM spectrometer entrance. This novel coupling has proved to be successful for detection of some simple molecules ionizable at the 2.94 µm wavelength. To further demonstrate the applicability of the system, a proof-of-principle reaction was selected, fulfilling the requirements of the system, and was subjected to comprehensive investigation of its performance. Herein, the reaction between N-Boc cysteine methyl ester and allyl alcohol has been performed in a batch reactor and on-line monitored via 1H NMR to establish reaction propagation. With the additional assessment, it was confirmed that the thiol-ene coupling can be performed within first 20 minutes of the irradiation with a reaction yield above 50%, proving that the reaction can be applied as a study case to assess the possibilities of the developed system. T2 - Echtzeit-Überwachung von (Photo)chemischen Reaktionen in Mikroströmungsreaktoren und schwebenden Tropfen durch IR-MALDI Ionenmoblität- und Massenspektrometrie KW - ion mobility spectrometry KW - mass spectrometry KW - acoustically levitated droplets KW - photochemical reactions KW - akustisch schwebende Tropfen KW - Ionenmobilitätspektrometrie KW - Massenspektrometrie KW - Photochemische Reaktionen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557298 ER - TY - THES A1 - Fischer, Jens Walter T1 - Random dynamics in collective behavior - consensus, clustering & extinction of populations T1 - Stochastische Dynamiken in kollektivem Verhalten: Konsens, Gruppenbildung, Aussterben von Populationen N2 - The echo chamber model describes the development of groups in heterogeneous social networks. By heterogeneous social network we mean a set of individuals, each of whom represents exactly one opinion. The existing relationships between individuals can then be represented by a graph. The echo chamber model is a time-discrete model which, like a board game, is played in rounds. In each round, an existing relationship is randomly and uniformly selected from the network and the two connected individuals interact. If the opinions of the individuals involved are sufficiently similar, they continue to move closer together in their opinions, whereas in the case of opinions that are too far apart, they break off their relationship and one of the individuals seeks a new relationship. In this paper we examine the building blocks of this model. We start from the observation that changes in the structure of relationships in the network can be described by a system of interacting particles in a more abstract space. These reflections lead to the definition of a new abstract graph that encompasses all possible relational configurations of the social network. This provides us with the geometric understanding necessary to analyse the dynamic components of the echo chamber model in Part III. As a first step, in Part 7, we leave aside the opinions of the inidividuals and assume that the position of the edges changes with each move as described above, in order to obtain a basic understanding of the underlying dynamics. Using Markov chain theory, we find upper bounds on the speed of convergence of an associated Markov chain to its unique stationary distribution and show that there are mutually identifiable networks that are not apparent in the dynamics under analysis, in the sense that the stationary distribution of the associated Markov chain gives equal weight to these networks. In the reversible cases, we focus in particular on the explicit form of the stationary distribution as well as on the lower bounds of the Cheeger constant to describe the convergence speed. The final result of Section 8, based on absorbing Markov chains, shows that in a reduced version of the echo chamber model, a hierarchical structure of the number of conflicting relations can be identified. We can use this structure to determine an upper bound on the expected absorption time, using a quasi-stationary distribution. This hierarchy of structure also provides a bridge to classical theories of pure death processes. We conclude by showing how future research can exploit this link and by discussing the importance of the results as building blocks for a full theoretical understanding of the echo chamber model. Finally, Part IV presents a published paper on the birth-death process with partial catastrophe. The paper is based on the explicit calculation of the first moment of a catastrophe. This first part is entirely based on an analytical approach to second degree recurrences with linear coefficients. The convergence to 0 of the resulting sequence as well as the speed of convergence are proved. On the other hand, the determination of the upper bounds of the expected value of the population size as well as its variance and the difference between the determined upper bound and the actual value of the expected value. For these results we use almost exclusively the theory of ordinary nonlinear differential equations. N2 - Beziehungen und damit Interaktion sowie Diskussion, aber auch Konflikt und Opposition bilden die Grundbausteine einer jeden Gesellschaft. Häufig wird Kommunikation als der übergreigende Begriff zur Beschreibung interner Strukturen einer Gesellschaft identifiziert. Dabei muss es sich aber nicht um eine Gesellschaft im Sinne von Nationen handeln, sondern kann auch schlicht eine Gruppe von Menschen umfassen, die miteinander strukturiert interagieren, beispielsweise, eine Gruppe von Angestellten, die an einem gemeinsamen Projekt arbeiten, oder die Mitglieder eines sozialen Netzwerks. In dieser Arbeit befassen wir uns mit der mathematischen Beschreibung solcher Prozesse innerhalb von Gruppen und Gesellschaften und legen dabei unseren Fokus auf die Bildung eines Konsens durch Interaktion aber auch die Konsequenzen von Konflikt und das potentielle Aussterben einer Population. Dabei werden zwei Modelle im Fokus des Interesses stehen: Das Echokammer Model sowie eine Erweiterung des Geburts-Todes Prozesses, die die Möglichkeit eines radikalen Abfalls der Populationsgr öße miteinschließt. Wir beginnen mit einer Einführung in Part I und teilen die verbleibende Arbeit in drei Teile auf, wobei sich die ersten beiden technischen Abschnitte, Part II und III, mit einer ausführlichen Analyse der Bausteine des Echokammer Models befassen und im dritten Abschnitt, in Part IV, der erweiterte Geburts- Todes Prozess untersucht wird. Dieser wird im Folgenden als Geburts-Todes Prozess mit teilweiser Katastrophe bezeichnet werden. Das Echokammer Model beschreibt die Entwicklung von Gruppen in zunächst heterogenen sozialen Netzwerken. Unter einem heterogenen sozialen Netzwerk verstehen wir dabei eine Menge von Individuen, von denen jedes exakt eine Meinungen vertritt. Meinungen werden vereinfacht durch Werte in [0, 1] modelliert. Bestehende Beziehungen unter den Individuen können dann durch einen Graphen dargestellt werden. Es handelt sich bei dem Echokammer Modell um ein zeit-diskretes Modell, das entsprechend, ähnlich einem Brettspiel, in Zügen abläuft. In jedem Zug wird zufällig gleichverteilt eine bestehende Beziehung aus dem Netzwerk ausgewählt und die beiden verbundenen Individuen interagieren. Dabei kann es zu zwei verschiedenen Interaktionen kommen. Sind die Meinungen der betroffenen Individuen hinreichend ähnlich, so nähern sie sich weiter in ihren Meinungen an, während sie im Fall von Meinungen, die zu weit von einander liegen, ihre Beziehung auflösen und sich eines der Individuen eine neue Beziehung sucht. 8 In dieser Arbeit untersuchen wir theoretisch die Bausteine dieses Modells. Dabei legen wir die Beobachtung zu Grunde, dass die Veränderungen der Beziehungsstruktur im Netzwerk durch einen System von interagierenden Partikeln auf einem abstrakteren Raum beschrieben werden kann. Dies erlaubt es insbesondere graphentheoretische überlegungen in die Analyse einfließen zu lassen. Diese überlegungen werden ausührlich in Part II diskutiert und führen zur Definition eines neuen, abstrahierten Graphens, der alle möglichen Beziehungskonfigurationen des sozialen Netzwerks umfasst. Dies erlaubt es uns einen ähnlichkeitsbegriff für Beziehungskonfigurationen auf Basis der benachbarten Knoten in besagtem Graphen zu definieren. Dies liefert uns das notwendige geometrische Verständnis um in Part III die dynamischen Komponenten des Echokammer models zu analysieren. Insbesondere fokusieren wir uns dabei auf die Dynamik der Kanten, für die bisher in der Literatur noch keine Ergebnisse existieren. Wir lassen zunächst in Abschnitt 7 die Meinungen der Individuen beiseite und nehmen an, dass die Position der Kanten sich in jedem Zug wie zuvor beschrieben ändert, um eine grundlegendes Verständnis der unterliegenden Dynamik zu erhalten. Unter der Verwendung der Theorie von Markovketten finden wir obere Schranken an die Konvergenzgeschwindigkeit einer assoziierten Markovkette gegen ihre eindeutige stationäre Verteilung und zeigen, dass es Netzwerke gibt, die miteinander identifizierbar und unter der analysierten Dynamik daheingehend ununterscheinbar sind, dass die stationäre Verteilung der assozierten Markovkette diesen Netzwerken dasselbe Gewicht zuordnet. Anschließend beweisen wir eine Reihe von quantitativen Resultaten, die sich insbesondere in Fällen, in denen die assozierte Markovkette reversibel ist, als berechenbar herausstellen. Insbesondere die explizite Form der stationären Verteilung sowie untere Schranken an die Cheeger Konstante zur Beschreibung der Konvergenzgeschwindigkeit stehen dabei im Fokus und werden ausführlich diskutiert. Nach dieser vertieften Analyse des reduzierten Modells, fügen wir die Meinungen unserer Betrachtung wieder hinzu. Das abschließende Result in Abschnitt 8, basierend auf absorbierenden Markovketten, liefert dann, dass in einer reduzierte Version des Echokammer Modells, in dem sich Individuen ähnlicher Meinung nicht annähern, eine hierarchische Struktur der Anzahl der konfliktreichen Beziehung identifiziert werden kann. Dies können wir ausnutzen, um eine obere Schranke an die erwartete Absorptionszeit, unter Zuhilfenahme einer quasi-stationären Verteilung, zu bestimmen. Diese hierarchische Struktur bildet außerdem eine Brücke zu klassischen Theorien von Geburts-Todes und, insbesondere, reinen Todes-Prozessen, für die eine reiche Literatur existiert. Wir zeigen abschließend auf, wie künftige Forschung diese Verbindung ausnutzen kann und diskutieren die Wichtigkeit der Ergbenisse als Bausteine eines vollständigen theoretischen Verständnisses des Echokammer Modells. Part IV stellt abschließend einen veröffentlichten Artikel vor, der sich dem Geburts- Todes Prozess mit teilweiser Katastrophe widmet. Besagter Artikel steht dabei auf zwei Säulen. Zum Einen der expliziten Berechnung des ersten Zeitpunkts einer Katastrophe, wenn die Population zu Beginn der Beobachtung von instabiler Größe ist. KW - Markov chains KW - graph theory KW - complex systems KW - interacting particle systems KW - Markovketten KW - komplexe Systeme KW - Graphentheorie KW - Systeme interagierender Partikel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553725 ER - TY - THES A1 - Ziege, Ricardo T1 - Growth dynamics and mechanical properties of E. coli biofilms T1 - Wachstumsdynamik und mechanische Eigenschaften von E. coli Biofilmen N2 - Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers. This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers. On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis. E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications. Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions. All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields. N2 - Biofilme sind komplexe lebende Materialien, die sich bilden, wenn Bakterien in eine Matrix aus selbstproduzierten Protein- und Polysaccharidfasern eingebettet werden. Die Bildung eines Netzwerks aus extrazellulären Biopolymerfasern trägt zum Zusammenhalt des Biofilms bei, indem sie die Zell-Zell-Anhaftung fördert und die Wechselwirkungen zwischen Biofilm und Substrat vermittelt. Diese sessile Form des Bakterienwachstums wurde von Mikrobiologen eingehend untersucht, um die schädlichen Auswirkungen von Biofilmen in der Medizin und Industrie zu verhindern. Biofilme werden nämlich mit einer erhöhten Antibiotikaresistenz bei bakteriellen Infektionen in Verbindung gebracht, und sie können auch zur Verstopfung von Rohrleitungen führen oder Biokorrosion fördern. Biofilme sind jedoch auch für die Biophysik von Interesse, da sie während ihres Wachstums komplexe morphologische Muster bilden können. In jüngster Zeit werden auf dem aufstrebenden Gebiet der künstlich hergestellten lebenden Materialien die mechanischen Eigenschaften von Biofilmen auf verschiedenen Längenskalen untersucht und die Werkzeuge der synthetischen Biologie genutzt, um die Funktionen ihrer konstitutiven Biopolymere zu beeinflussen. In dieser Doktorarbeit soll geklärt werden, wie die Morphogenese von Escherichia coli (E. coli)-Biofilmen durch deren Wachstumsdynamik und mechanische Eigenschaften beeinflusst wird. Um dieser Frage nachzugehen, habe ich Methoden aus der Zellmechanik und der Materialwissenschaft verwendet. Zunächst habe ich untersucht, wie die biologische Aktivität in Biofilmen zu ungleichmäßigen Wachstumsmustern führt. In einer zweiten Studie untersuchte ich, wie sich die Morphogenese von E. coli-Biofilmen und ihre mechanischen Eigenschaften an einen Umweltstimulus, nämlich den Wassergehalt des Substrats, anpassen. Schließlich habe ich abgeschätzt, wie sich die mechanischen Eigenschaften von E. coli-Biofilmen verändern, wenn die Bakterien verschiedene extrazelluläre Biopolymere exprimieren. Auf nährstoffhaltigen Hydrogelen können mikrometergroße E. coli-Zellen zentimetergroße Biofilme bilden. Während dieses Prozesses führen die bakterielle Vermehrung und die Matrixproduktion zu mechanischen Spannungen im Biofilm, die sich durch die Bildung von makroskopischen Falten und delaminierten Knicken entladen. Um diese biologischen und mechanischen Phänomene miteinander in Beziehung zu setzen, habe ich mit Hilfe von Zeitraffer-Fluoreszenzaufnahmen die Zell- und Matrixoberflächendichte in den frühen und späten Phasen des E. coli-Biofilmwachstums verfolgt. Die Kolokalisierung hoher Zell- und Matrixdichten an der Peripherie geht dem Auftreten mechanischer Instabilitäten in diesem ringförmigen Bereich voraus. An diesem äußeren Ring wird ein frühes Wachstum festgestellt, das durch Zugabe von fluoreszierenden Mikrokugeln zum bakteriellen Inokulum analysiert wurde. Aber nur wenn im Zentrum des Biofilms hohe Raten der Matrixproduktion vorhanden sind, beginnt die Ausbreitung des gesamten Biofilms entlang der Feststoff-Luft-Grenzfläche. Indem ich größere fluoreszierende Partikel über einen längeren Zeitraum verfolgte, konnte ich mehrere kinematische Stadien der E. coli-Biofilmexpansion unterscheiden und einen Übergang von nichtlinearen zu linearen Geschwindigkeitsprofilen beobachten, der dem Auftreten von Falten an der Biofilmperipherie vorausgeht. Die Zerlegung der Partikelgeschwindigkeiten in ihre radialen und umlaufenden Komponenten ergab ein letztes kinematisches Stadium, in dem die Bewegung des Biofilms hauptsächlich auf die radialen delaminierten Knicke gerichtet ist, die sich vertikalisieren. Die in diesen Regionen berechneten Druckspannungen verformen die darunter liegenden Agarsubstrate erheblich. Die gleichzeitige Ansammlung höherer Zell- und Matrixdichten in einer ringförmigen Region und die Abfolge mehrerer kinematischer Stadien dürften somit das Entstehen mechanischer Instabilitäten an der Biofilm-Peripherie fördern. Diese experimentellen Ergebnisse werden voraussichtlich zukünftige Modellierungsansätze der Biofilmmorphogenese voranbringen. Die Morphogenese des E. coli-Biofilms wird voraussichtlich auch von externen Stimuli aus der Umwelt abhängen. Um zu klären, wie das Wasser zur Einstellung der Materialeigenschaften von Biofilmen genutzt werden könnte, haben wir das Wachstum, die Faltenbildung und die Steifigkeit von E. coli-Biofilmen in Abhängigkeit vom Wassergehalt der Nährsubstrate quantifiziert. Zeitraffermikroskopie und computergestützte Bildanalyse zeigten, dass Substrate mit hohem Wassergehalt die Ausbreitungskinetik des Biofilms fördern, während Substrate mit niedrigem Wassergehalt die Faltenbildung des Biofilms begünstigen. Die auf Biofilm-Querschnitten beobachteten Falten erschienen auf Substraten mit hohem Wassergehalt stärker gebogen, während sie auf Substraten mit niedrigem Wassergehalt eher vertikal verliefen. Sowohl die feuchte als auch die trockene Biomasse, die während der 4-tägigen Kultur akkumuliert wurde, war in Biofilmen, die auf Substraten mit hohem Wassergehalt gezüchtet wurden, größer, trotz der zusätzlichen Porosität innerhalb der Matrixschicht. Schließlich ergab die Mikroindentationsanalyse, dass Substrate mit niedrigem Wassergehalt die Bildung von steiferen Biofilmen begünstigten. Diese Studie zeigt, dass E. coli-Biofilme auf den Wassergehalt ihres Substrats reagieren, was für die Abstimmung ihrer Materialeigenschaften im Hinblick auf weitere Anwendungen genutzt werden könnte. Die Materialeigenschaften von Biofilmen hängen außerdem von der Zusammensetzung und Struktur der Matrix aus extrazellulären Proteinen und Polysacchariden ab. Insbesondere wurde vermutet, dass E. coli-Biofilme aufgrund eines dichten Fasernetzwerks aus Amyloid-Curli und Phosphoethanolamin-modifizierter Cellulose eine gewebeähnliche Elastizität aufweisen. Um den Beitrag dieser Komponenten zu den entstehenden mechanischen Eigenschaften von E. coli-Biofilmen zu verstehen, führten wir an Biofilmen, die aus Bakterien verschiedener Stämme gewachsen waren, Mikroeindrücke durch. Biofilme, die beide Hauptmatrixkomponenten enthalten, wiesen nicht nur eine höhere Trockenmasse, einen größeren Ausbreitungsdurchmesser und einen leicht verringerten Wassergehalt auf, sondern auch eine hohe Steifigkeit im Bereich von mehreren hundert kPa, ähnlich wie Biofilme, die nur Curli-Fasern enthalten. Das Fehlen von Amyloid-Curli-Fasern führt dagegen zu deutlich höheren Adhäsionsenergien und einem viskoelastischeren, flüssigkeitsähnlichen Materialverhalten. Die Kombination von Amyloid-Curli-Fasern und Phosphoethanolamin-modifizierten Cellulosefasern impliziert daher die Bildung eines Verbundmaterials, bei dem die Amyloid-Curli-Fasern den E. coli-Biofilmen Steifigkeit verleihen, während die Phosphoethanolamin-modifizierte Cellulose eher als Klebstoff wirkt. Diese Ergebnisse motivieren zu weiteren Studien mit gereinigten Versionen dieser Protein- und Polysaccharidkomponenten, um besser zu verstehen, wie ihre Interaktionen die Funktionen des Biofilms unterstützen. Alle drei Studien zeigen verschiedene Aspekte der Biofilm-Morphogenese, die miteinander verbunden sind. Die erste Arbeit zeigt den Zusammenhang zwischen ungleichmäßigen biologischen Aktivitäten und dem Auftreten mechanischer Instabilitäten im Biofilm auf. Die zweite Arbeit bestätigt die Anpassungsfähigkeit der Morphogenese des E. coli-Biofilms und seiner mechanischen Eigenschaften an einen Umweltreiz, nämlich Wasser. Die letzte Studie schließlich zeigt die komplementäre Rolle der einzelnen Matrixkomponenten bei der Bildung eines stabilen Biofilmmaterials, das nicht nur komplexe Morphologien bildet, sondern auch als Schutzschild für die darin enthaltenen Bakterien fungiert. Unsere experimentellen Erkenntnisse über die Morphogenese von E. coli-Biofilmen und ihre mechanischen Eigenschaften können weitere Auswirkungen auf grundlegende und angewandte Biofilm-Forschungsbereiche haben. KW - biofilm KW - E. coli KW - living materials KW - mechanobiology KW - E. coli KW - Biofilm KW - lebende Materialien KW - Mechanobiologie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559869 ER - TY - THES A1 - Steding, Svenja T1 - Geochemical and Hydraulic Modeling of Cavernous Structures in Potash Seams T1 - Geochemische und hydraulische Modellierung kavernöser Strukturen in Kaliflözen N2 - Salt deposits offer a variety of usage types. These include the mining of rock salt and potash salt as important raw materials, the storage of energy in man-made underground caverns, and the disposal of hazardous substances in former mines. The most serious risk with any of these usage types comes from the contact with groundwater or surface water. It causes an uncontrolled dissolution of salt rock, which in the worst case can result in the flooding or collapse of underground facilities. Especially along potash seams, cavernous structures can spread quickly, because potash salts show a much higher solubility than rock salt. However, as their chemical behavior is quite complex, previous models do not account for these highly soluble interlayers. Therefore, the objective of the present thesis is to describe the evolution of cavernous structures along potash seams in space and time in order to improve hazard mitigation during the utilization of salt deposits. The formation of cavernous structures represents an interplay of chemical and hydraulic processes. Hence, the first step is to systematically investigate the dissolution and precipitation reactions that occur when water and potash salt come into contact. For this purpose, a geochemical reaction model is used. The results show that the minerals are only partially dissolved, resulting in a porous sponge like structure. With the saturation of the solution increasing, various secondary minerals are formed, whose number and type depend on the original rock composition. Field data confirm a correlation between the degree of saturation and the distance from the center of the cavern, where solution is entering. Subsequently, the reaction model is coupled with a flow and transport code and supplemented by a novel approach called ‘interchange’. The latter enables the exchange of solution and rock between areas of different porosity and mineralogy, and thus ultimately the growth of the cavernous structure. By means of several scenario analyses, cavern shape, growth rate and mineralogy are systematically investigated, taking also heterogeneous potash seams into account. The results show that basically four different cases can be distinguished, with mixed forms being a frequent occurrence in nature. The classification scheme is based on the dimensionless numbers Péclet and Damköhler, and allows for a first assessment of the hazard potential. In future, the model can be applied to any field case, using measurement data for calibration. The presented research work provides a reactive transport model that is able to spatially and temporally characterize the propagation of cavernous structures along potash seams for the first time. Furthermore, it allows to determine thickness and composition of transition zones between cavern center and unaffected salt rock. The latter is particularly important in potash mining, so that natural cavernous structures can be located at an early stage and the risk of mine flooding can thus be reduced. The models may also contribute to an improved hazard prevention in the construction of storage caverns and the disposal of hazardous waste in salt deposits. Predictions regarding the characteristics and evolution of cavernous structures enable a better assessment of potential hazards, such as integrity or stability loss, as well as of suitable mitigation measures. N2 - Salzlagerstätten bieten eine Vielzahl an Nutzungsmöglichkeiten. Diese umfassen den Abbau von Steinsalz und Kalisalz als wichtige Rohstoffe, die Speicherung von Energie in künstlich erzeugten Hohlräumen, sowie die Entsorgung gefährlicher Substanzen in stillgelegten Bergwerken. Die größte Gefahr bei jeder dieser Nutzungsarten ist der Kontakt mit Grund- oder Oberflächenwasser. Er bewirkt eine unkontrollierte Lösung des Salzgesteins, was im schlimmsten Fall zur Flutung oder zum Einsturz unterirdischer Infrastrukturen führt. Insbesondere entlang von Kaliflözen können sich kavernöse Strukturen schnell ausbreiten, da Kalisalze eine wesentlich höhere Löslichkeit besitzen als Steinsalz. Ihr chemisches Verhalten ist jedoch komplex, weshalb bisherige Modelle diese hochlöslichen Zwischenschichten vernachlässigen. Ziel der vorliegenden Doktorarbeit ist es daher, die Ausbreitung kavernöser Strukturen entlang von Kaliflözen räumlich und zeitlich zu beschreiben und damit die Möglichkeiten zur Gefahrenprävention bei der Nutzung von Salzlagerstätten zu verbessern. Die Bildung kavernöser Strukturen ist ein Zusammenspiel chemischer und hydraulischer Prozesse. Zunächst wird daher mithilfe eines geochemischen Reaktionsmodells systematisch untersucht, welche Lösungs- und Fällungsreaktionen beim Kontakt von Wasser und Kalisalz auftreten. Die Ergebnisse zeigen, dass nur ein Teil der Minerale gelöst wird, wodurch sich eine poröse, schwammartige Struktur bildet. Mit zunehmender Aufsättigung der Lösung treten verschiedene Sekundärminerale auf, deren Anzahl und Art vom Ausgangsgestein abhängen. Felddaten belegen dabei eine Korrelation zwischen Sättigungsgrad und Abstand vom Kavernenzentrum, wo die Lösung ein- und austritt. Anschließend wird das Reaktionsmodell mit einem Strömungs- und Transportcode gekoppelt und um einen neuartigen Ansatz namens "interchange" ergänzt. Dieser ermöglicht den Austausch von Lösung und Gestein zwischen Bereichen unterschiedlicher Porosität und Mineralogie, und damit letztlich das Wachstum der kavernösen Struktur. In mehreren Szenarienanalysen werden Kavernenform, Ausbreitungsgeschwindigkeit und Mineralogie systematisch untersucht und dabei auch heterogene Kaliflöze betrachtet. Die Ergebnisse zeigen, dass grundsätzlich vier Fälle zu unterscheiden sind, wobei in der Natur häufig Mischformen auftreten. Die Klassifizierung erfolgt auf Basis der dimensionslosen Kennzahlen Péclet und Damköhler und ermöglicht eine erste Abschätzung des Gefahrenpotentials. In Zukunft kann das Modell auf beliebige Feldbeispiele angewandt und mithilfe von Messdaten kalibriert werden. Die vorliegende Arbeit liefert ein reaktives Transportmodell, mit dem die Ausbreitung kavernöser Strukturen entlang von Kaliflözen erstmals räumlich und zeitlich beschrieben werden kann. Auch Mächtigkeit und Zusammensetzung der Übergangszone zwischen Kavernenzentrum und unberührtem Salzgestein können damit bestimmt werden. Letzteres ist insbesondere im Kalibergbau von Bedeutung, um natürliche kavernöse Strukturen rechtzeitig zu lokalisieren und damit das Risiko für eine Flutung von Bergwerken zu verringern. Auch bei der Herstellung von Speicherkavernen und der Einlagerung gefährlicher Substanzen im Salzgestein können die Modelle zu einer besseren Gefahrenprävention beitragen. Sie ermöglichen Prognosen über Beschaffenheit und Ausbreitungsverhalten kavernöser Strukturen, wodurch sowohl potentielle Gefahren, wie der Verlust von Dichtigkeit oder Stabilität, als auch geeignete Gegenmaßnahmen besser abschätzbar werden. KW - reactive transport KW - reaktiver Transport KW - salt rock KW - Salzgestein KW - water rock interactions KW - Wasser-Gesteins-Wechselwirkungen KW - density-driven flow KW - dichtegetriebene Strömung KW - PHREEQC Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-548182 ER - TY - THES A1 - Richter, Maximilian Jacob Enzo Amandus T1 - Continental rift dynamics across the scales T1 - Dynamiken kontinentaler Grabenbrüche über die Skalen BT - numerical modelling of localisation processes BT - numerische Modellierung von Lokalisations-Prozessen N2 - Localisation of deformation is a ubiquitous feature in continental rift dynamics and observed across drastically different time and length scales. This thesis comprises one experimental and two numerical modelling studies investigating strain localisation in (1) a ductile shear zone induced by a material heterogeneity and (2) in an active continental rift setting. The studies are related by the fact that the weakening mechanisms on the crystallographic and grain size scale enable bulk rock weakening, which fundamentally enables the formation of shear zones, continental rifts and hence plate tectonics. Aiming to investigate the controlling mechanisms on initiation and evolution of a shear zone, the torsion experiments of the experimental study were conducted in a Patterson type apparatus with strong Carrara marble cylinders with a weak, planar Solnhofen limestone inclusion. Using state-of-the-art numerical modelling software, the torsion experiments were simulated to answer questions regarding localisation procedure like stress distribution or the impact of rheological weakening. 2D numerical models were also employed to integrate geophysical and geological data to explain characteristic tectonic evolution of the Southern and Central Kenya Rift. Key elements of the numerical tools are a randomized initial strain distribution and the usage of strain softening. During the torsion experiments, deformation begins to localise at the limestone inclusion tips in a process zone, which propagates into the marble matrix with increasing deformation until a ductile shear zone is established. Minor indicators for coexisting brittle deformation are found close to the inclusion tip and presumed to slightly facilitate strain localisation besides the dominant ductile deformation processes. The 2D numerical model of the torsion experiment successfully predicts local stress concentration and strain rate amplification ahead of the inclusion in first order agreement with the experimental results. A simple linear parametrization of strain weaking enables high accuracy reproduction of phenomenological aspects of the observed weakening. The torsion experiments suggest that loading conditions do not affect strain localisation during high temperature deformation of multiphase material with high viscosity contrasts. A numerical simulation can provide a way of analysing the process zone evolution virtually and extend the examinable frame. Furthermore, the nested structure and anastomosing shape of an ultramylonite band was mimicked with an additional second softening step. Rheological weakening is necessary to establish a shear zone in a strong matrix around a weak inclusion and for ultramylonite formation. Such strain weakening laws are also incorporated into the numerical models of the Southern and Central Kenya Rift that capture the characteristic tectonic evolution. A three-stage early rift evolution is suggested that starts with (1) the accommodation of strain by a single border fault and flexure of the hanging-wall crust, after which (2) faulting in the hanging-wall and the basin centre increases before (3) the early-stage asymmetry is lost and basinward localisation of deformation occurs. Along-strike variability of rifts can be produced by modifying the initial random noise distribution. In summary, the three studies address selected aspects of the broad range of mechanisms and processes that fundamentally enable the deformation of rock and govern the localisation patterns across the scales. In addition to the aforementioned results, the first and second manuscripts combined, demonstrate a procedure to find new or improve on existing numerical formulations for specific rheologies and their dynamic weakening. These formulations are essential in addressing rock deformation from the grain to the global scale. As within the third study of this thesis, where geodynamic controls on the evolution of a rift were examined and acquired by the integration of geological and geophysical data into a numerical model. N2 - Die Lokalisierung von Deformation ist ein allgegenwärtiges Merkmal in der Dynamik von Grabenbrüchen bzw. Riftzonen und wird über verschiedene Zeit- und Längenskalen beobachtet. Diese Arbeit umfasst eine experimentelle und zwei numerische Studien zur Untersuchung der Lokalisierung von Deformation in (1) einer durch eine Materialheterogenität induzierten duktilen Scherzone und (2) in einem aktiven Kontinentalgraben. Die Studien verbindet, dass die Schwächungsmechanismen auf der kristallographischen Skala und der Korngrößenskala eine Enthärtung eines Gesteinkörpers ermöglicht, was im Wesentlichen die Bildung von Scherzonen, Grabenbrüchen und damit Plattentektonik ermöglicht. Um die Kontrollmechanismen für die Initiierung und Entwicklung einer Scherzone zu untersuchen, wurden die Torsionsexperimente der experimentellen Studie in einem Patterson-Gerät an starken Carrara-Marmorzylinder mit einer schwachen, planaren Solnhofen-Kalksteineinschluss durchgeführt. Mit modernster numerischer Modellierungssoftware wurden die Torsionsexperimente simuliert, um weitere Fragen zum Lokalisierungsablauf wie die Verteilung der Spannung oder den Einfluss rheologischer Schwächung zu beantworten. Numerische 2D-Modelle wurden auch verwendet, um geophysikalische und geologische Daten zu kombinieren, um die charakteristische tektonische Entwicklung des südlichen und zentralen Kenia-Rifts zu erklären. Schlüsselelemente der verwendeten numerischen Werkzeuge sind eine randomisierte Anfangsverteilung des Strain und der Einsatz von Strain basierter Enthärtung. Während der Torsionsversuche lokalisiert die Deformation zunächst an den Kalksteineinschlussspitzen in einer Prozesszone, die sich mit zunehmender Deformation in die Marmormatrix ausbreitet bis sich eine duktile Scherzone einstellt. Neben den dominierenden duktilen Verformungsprozessen werden geringfügige Indikatoren für eine koexistierende spröde Verformung nahe der Einschlussspitzen gefunden und es wird angenommen, dass diese die Lokalisierung der Deformation geringfügig erleichtern. In erster Ordnung sagt das numerische 2D-Modell des Torsionsexperiments erfolgreich lokale Spannungskonzentration und Strainratenverstärkung vor der Inklusion in Übereinstimmung mit den experimentellen Ergebnissen vorher. Eine einfache lineare Parametrisierung der Enthärtung durch Strain ermöglicht eine genaue Reproduktion phänomenologischer Aspekte der beobachteten Schwächung. Die Torsionsexperimente legen nahe, dass die Randbedingungen die Lokalisierung des Strain während der Hochtemperaturverformung von Mehrphasenmaterial mit hohen Viskositätskontrasten nicht beeinflussen. Die numerische Simulation ermöglicht es, die Entwicklung der Prozesszone virtuell zu analysieren und den Untersuchungsrahmen zu erweitern. Darüber hinaus wurde die verschachtelte Struktur und anastomosierende Form eines Ultramylonitbandes mit einem zusätzlichen zweiten Enthärtungsschritt nachgeahmt. Die rheologische Schwächung ist notwendig, um eine Scherzone in einer starken Matrix um einen schwachen Einschluss herum und für die Ultramylonitbildung zu etablieren. Solche Schwächungsgesetze, die auf Strain basieren, fließen auch in die numerischen Modelle des südlichen und zentralen Kenia-Rifts ein, die die charakteristische tektonische Entwicklung erfassen. Es wird eine dreistufige frühe Riftentwicklung vorgeschlagen, die mit (1) der Anpassung von Spannungen durch eine einzelne Grenzstörung und Biegung der hangenden Kruste beginnt, wonach (2) die Verwerfung im Hangenden und im Beckenzentrum zunimmt, bevor (3) die Asymmetrie des Frühstadiums verloren geht und es zu einer beckenseitigen Deformationslokalisierung kommt. Die Variabilität von Rissen entlang des Rifts kann durch Modifizieren der anfänglichen zufälligen Rauschverteilung erzeugt werden. Zusammenfassend befassen sich die drei Studien mit ausgewählten Aspekten der breiten Palette von Mechanismen und Prozessen, die die Deformation von Gestein grundlegend ermöglichen und die Lokalisierungsmuster über die Skalen bestimmen. Zusätzlich zu den oben genannten Ergebnissen demonstrieren das erste und zweite Manuskript in Kombination ein Verfahren, um neue oder bestehende numerische Formulierungen für spezifische Rheologien und deren dynamische Schwächung zu finden oder zu verbessern. Diese Formulierungen sind essenziell, um Gesteinsverformung von der Korngrößen bis zur globalen Skala zu untersuchen. Wie in der dritten Studie dieser Dissertation, in der geodynamische Kontrollen auf die Entwicklung eines Grabenbruchs durch die Integration geologischer und geophysikalischer Daten in ein numerisches Modell untersucht und erfasst wurden. KW - Strain Localisation KW - Continental Rifts KW - Torsion Experiments KW - Geodynamic Modelling KW - 2D Numerical Modelling KW - Lokalisierung von Deformation KW - Grabenbrüche KW - Geodynamische Modellierung KW - Torsionsexperimente KW - Numerische 2D Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-550606 ER - TY - THES A1 - Tattarini, Giulia T1 - A job is good, but is a good job healthier? BT - Longitudinal analyses on the health consequences of unemployment and precarious employment in Europe N2 - What are the consequences of unemployment and precarious employment for individuals' health in Europe? What are the moderating factors that may offset (or increase) the health consequences of labor-market risks? How do the effects of these risks vary across different contexts, which differ in their institutional and cultural settings? Does gender, regarded as a social structure, play a role, and how? To answer these questions is the aim of my cumulative thesis. This study aims to advance our knowledge about the health consequences that unemployment and precariousness cause over the life course. In particular, I investigate how several moderating factors, such as gender, the family, and the broader cultural and institutional context, may offset or increase the impact of employment instability and insecurity on individual health. In my first paper, 'The buffering role of the family in the relationship between job loss and self-perceived health: Longitudinal results from Europe, 2004-2011', I and my co-authors measure the causal effect of job loss on health and the role of the family and welfare states (regimes) as moderating factors. Using EU-SILC longitudinal data (2004-2011), we estimate the probability of experiencing 'bad health' following a transition to unemployment by applying linear probability models and undertake separate analyses for men and women. Firstly, we measure whether changes in the independent variable 'job loss' lead to changes in the dependent variable 'self-rated health' for men and women separately. Then, by adding into the model different interaction terms, we measure the moderating effect of the family, both in terms of emotional and economic support, and how much it varies across different welfare regimes. As an identification strategy, we first implement static fixed-effect panel models, which control for time-varying observables and indirect health selection—i.e., constant unobserved heterogeneity. Secondly, to control for reverse causality and path dependency, we implement dynamic fixed-effect panel models, adding a lagged dependent variable to the model. We explore the role of the family by focusing on close ties within households: we consider the presence of a stable partner and his/her working status as a source of social and economic support. According to previous literature, having a partner should reduce the stress from adverse events, thanks to the symbolic and emotional dimensions that such a relationship entails, regardless of any economic benefits. Our results, however, suggest that benefits linked to the presence of a (female) partner also come from the financial stability that (s)he can provide in terms of a second income. Furthermore, we find partners' employment to be at least as important as the mere presence of the partner in reducing the negative effect of job loss on the individual's health by maintaining the household's standard of living and decreasing economic strain on the family. Our results are in line with previous research, which has highlighted that some people cope better than others with adverse life circumstances, and the support provided by the family is a crucial resource in that regard. We also reported an important interaction between the family and the welfare state in moderating the health consequences of unemployment, showing how the compensation effect of the family varies across welfare regimes. The family plays a decisive role in cushioning the adverse consequences of labor market risks in Southern and Eastern welfare states, characterized by less developed social protection systems and –especially the Southern – high level of familialism. The first paper also found important gender differences concerning job loss, family and welfare effects. Of particular interest is the evidence suggesting that health selection works differently for men and women, playing a more prominent role for women than for men in explaining the relationship between job loss and self-perceived health. The second paper, 'Gender roles and selection mechanisms across contexts: A comparative analysis of the relationship between unemployment, self-perceived health, and gender.' investigates more in-depth the gender differential in health driven by unemployment. Being a highly contested issue in literature, we aim to study whether men are more penalized than women or the other way around and the mechanisms that may explain the gender difference. To do that, we rely on two theoretical arguments: the availability of alternative roles and social selection. The first argument builds on the idea that men and women may compensate for the detrimental health consequences of unemployment through the commitment to 'alternative roles,' which can provide for the resources needed to fulfill people's socially constructed needs. Notably, the availability of alternative options depends on the different positions that men and women have in society. Further, we merge the availability of the 'alternative roles' argument with the health selection argument. We assume that health selection could be contingent on people's social position as defined by gender and, thus, explain the gender differential in the relationship between unemployment and health. Ill people might be less reluctant to fall or remain (i.e., self-select) in unemployment if they have alternative roles. In Western societies, women generally have more alternative roles than men and thus more discretion in their labor market attachment. Therefore, health selection should be stronger for them, explaining why unemployment is less menace for women than for their male counterparts. Finally, relying on the idea of different gender regimes, we extended these arguments to comparison across contexts. For example, in contexts where being a caregiver is assumed to be women's traditional and primary roles and the primary breadwinner role is reserved to men, unemployment is less stigmatized, and taking up alternative roles is more socially accepted for women than for men (Hp.1). Accordingly, social (self)selection should be stronger for women than for men in traditional contexts, where, in the case of ill-health, the separation from work is eased by the availability of alternative roles (Hp.2). By focusing on contexts that are representative of different gender regimes, we implement a multiple-step comparative approach. Firstly, by using EU-SILC longitudinal data (2004-2015), our analysis tests gender roles and selection mechanisms for Sweden and Italy, representing radically different gender regimes, thus providing institutional and cultural variation. Then, we limit institutional heterogeneity by focusing on Germany and comparing East- and West-Germany and older and younger cohorts—for West-Germany (SOEP data 1995-2017). Next, to assess the differential impact of unemployment for men and women, we compared (unemployed and employed) men with (unemployed and employed) women. To do so, we calculate predicted probabilities and average marginal effect from two distinct random-effects probit models. Our first step is estimating random-effects models that assess the association between unemployment and self-perceived health, controlling for observable characteristics. In the second step, our fully adjusted model controls for both direct and indirect selection. We do this using dynamic correlated random-effects (CRE) models. Further, based on the fully adjusted model, we test our hypotheses on alternative roles (Hp.1) by comparing several contexts – models are estimated separately for each context. For this hypothesis, we pool men and women and include an interaction term between unemployment and gender, which has the advantage to allow for directly testing whether gender differences in the effect of unemployment exist and are statistically significant. Finally, we test the role of selection mechanisms (Hp.2), using the KHB method to compare coefficients across nested nonlinear models. Specifically, we test the role of selection for the relationship between unemployment and health by comparing the partially-adjusted and fully-adjusted models. To allow selection mechanisms to operate differently between genders, we estimate separate models for men and women. We found support to our first hypotheses—the context where people are embedded structures the relationship between unemployment, health, and gender. We found no gendered effect of unemployment on health in the egalitarian context of Sweden. Conversely, in the traditional context of Italy, we observed substantive and statistically significant gender differences in the effect of unemployment on bad health, with women suffering less than men. We found the same pattern for comparing East and West Germany and younger and older cohorts in West Germany. On the contrary, our results did not support our theoretical argument on social selection. We found that in Sweden, women are more selected out of employment than men. In contrast, in Italy, health selection does not seem to be the primary mechanism behind the gender differential—Italian men and women seem to be selected out of employment to the same extent. Namely, we do not find any evidence that health selection is stronger for women in more traditional countries (Hp2), despite the fact that the institutional and the cultural context would offer them a more comprehensive range of 'alternative roles' relative to men. Moreover, our second hypothesis is also rejected in the second and third comparisons, where the cross-country heterogeneity is reduced to maximize cultural differences within the same institutional context. Further research that addresses selection into inactivity is needed to evaluate the interplay between selection and social roles across gender regimes. While the health consequences of unemployment have been on the research agenda for a pretty long time, the interest in precarious employment—defined as the linking of the vulnerable worker to work that is characterized by uncertainty and insecurity concerning pay, the stability of the work arrangement, limited access to social benefits, and statutory protections—has emerged only later. Since the 80s, scholars from different disciplines have raised concerns about the social consequences of de-standardization of employment relationships. However, while work has become undoubtedly more precarious, very little is known about its causal effect on individual health and the role of gender as a moderator. These questions are at the core of my third paper : 'Bad job, bad health? A longitudinal analysis of the interaction between precariousness, gender and self-perceived health in Germany'. Herein, I investigate the multidimensional nature of precarious employment and its causal effect on health, particularly focusing on gender differences. With this paper, I aim at overcoming three major shortcomings of earlier studies: The first one regards the cross-sectional nature of data that prevents the authors from ruling out unobserved heterogeneity as a mechanism for the association between precarious employment and health. Indeed, several unmeasured individual characteristics—such as cognitive abilities—may confound the relationship between precarious work and health, leading to biased results. Secondly, only a few studies have directly addressed the role of gender in shaping the relationship. Moreover, available results on the gender differential are mixed and inconsistent: some found precarious employment being more detrimental for women's health, while others found no gender differences or stronger negative association for men. Finally, previous attempts to an empirical translation of the employment precariousness (EP) concept have not always been coherent with their theoretical framework. EP is usually assumed to be a multidimensional and continuous phenomenon; it is characterized by different dimensions of insecurity that may overlap in the same job and lead to different "degrees of precariousness." However, researchers have predominantly focused on one-dimensional indicators—e.g., temporary employment, subjective job insecurity—to measure EP and study the association with health. Besides the fact that this approach partially grasps the phenomenon's complexity, the major problem is the inconsistency of evidence that it has produced. Indeed, this line of inquiry generally reveals an ambiguous picture, with some studies finding substantial adverse effects of temporary over permanent employment, while others report only minor differences. To measure the (causal) effect of precarious work on self-rated health and its variation by gender, I focus on Germany and use four waves from SOEP data (2003, 2007, 2011, and 2015). Germany is a suitable context for my study. Indeed, since the 1980s, the labor market and welfare system have been restructured in many ways to increase the German economy's competitiveness in the global market. As a result, the (standard) employment relationship has been de-standardized: non-standard and atypical employment arrangements—i.e., part-time work, fixed-term contracts, mini-jobs, and work agencies—have increased over time while wages have lowered, even among workers with standard work. In addition, the power of unions has also fallen over the last three decades, leaving a large share of workers without collective protection. Because of this process of de-standardization, the link between wage employment and strong social rights has eroded, making workers more powerless and more vulnerable to labor market risks than in the past. EP refers to this uneven distribution of power in the employment relationship, which can be detrimental to workers' health. Indeed, by affecting individuals' access to power and other resources, EP puts precarious workers at risk of experiencing health shocks and influences their ability to gain and accumulate health advantages (Hp.1). Further, the focus on Germany allows me to investigate my second research question on the gender differential. Germany is usually regarded as a traditionalist gender regime: a context characterized by a configuration of roles. Here, being a caregiver is assumed to be women's primary role, whereas the primary breadwinner role is reserved for men. Although many signs of progress have been made over the last decades towards a greater equalization of opportunities and more egalitarianism, the breadwinner model has barely changed towards a modified version. Thus, women usually take on the double role of workers (the so-called secondary earner) and caregivers, and men still devote most of their time to paid work activities. Moreover, the overall upward trend towards more egalitarian gender ideologies has leveled off over the last decades, moving notably towards more traditional gender ideologies. In this setting, two alternative hypotheses are possible. Firstly, I assume that the negative relationship between EP and health is stronger for women than for men. This is because women are systematically more disadvantaged than men in the public and private spheres of life, having less access to formal and informal sources of power. These gender-related power asymmetries may interact with EP-related power asymmetries resulting in a stronger effect of EP on women's health than on men's health (Hp.2). An alternative way of looking at the gender differential is to consider the interaction that precariousness might have with men's and women's gender identities. According to this view, the negative relationship between EP and health is weaker for women than for men (Hp.2a). In a society with a gendered division of labor and a strong link between masculine identities and stable and well-rewarded job—i.e., a job that confers the role of primary family provider—a male worker with precarious employment might violate the traditional male gender role. Men in precarious jobs may perceive themselves (and by others) as possessing a socially undesirable characteristic, which conflicts with the stereotypical idea of themselves as the male breadwinner. Engaging in behaviors that contradict stereotypical gender identity may decrease self-esteem and foster feelings of inferiority, helplessness, and jealousy, leading to poor health. I develop a new indicator of EP that empirically translates a definition of EP as a multidimensional and continuous phenomenon. I assume that EP is a latent construct composed of seven dimensions of insecurity chosen according to the theory and previous empirical research: Income insecurity, social insecurity, legal insecurity, employment insecurity, working-time insecurity, representation insecurity, worker's vulnerability. The seven dimensions are proxied by eight indicators available in the four waves of the SOEP dataset. The EP composite indicator is obtained by performing a multiple correspondence analysis (MCA) on the eight indicators. This approach aims to construct a summary scale in which all dimensions contribute jointly to the measured experience of precariousness and its health impact. Further, the relationship between EP and 'general self-perceived health' is estimated by applying ordered probit random-effects estimators and calculating average marginal effect (further AME). Then, to control for unobserved heterogeneity, I implement correlated random-effects models that add to the model the within-individual means of the time-varying independent variables. To test the significance of the gender differential, I add an interaction term between EP and gender in the fully adjusted model in the pooled sample. My correlated random-effects models showed EP's negative and substantial 'effect' on self-perceived health for both men and women. Although nonsignificant, the evidence seems in line with previous cross-sectional literature. It supports the hypothesis that employment precariousness could be detrimental to workers' health. Further, my results showed the crucial role of unobserved heterogeneity in shaping the health consequences of precarious employment. This is particularly important as evidence accumulates, yet it is still mostly descriptive. Moreover, my results revealed a substantial difference among men and women in the relationship between EP and health: when EP increases, the risk of experiencing poor health increases much more for men than for women. This evidence falsifies previous theory according to whom the gender differential is contingent on the structurally disadvantaged position of women in western societies. In contrast, they seem to confirm the idea that men in precarious work could experience role conflict to a larger extent than women, as their self-standard is supposed to be the stereotypical breadwinner worker with a good and well-rewarded job. Finally, results from the multiple correspondence analysis contribute to the methodological debate on precariousness, showing that a multidimensional and continuous indicator can express a latent variable of EP. All in all, complementarities are revealed in the results of unemployment and employment precariousness, which have two implications: Policy-makers need to be aware that the total costs of unemployment and precariousness go far beyond the economic and material realm penetrating other fundamental life domains such as individual health. Moreover, they need to balance the trade-off between protecting adequately unemployed people and fostering high-quality employment in reaction to the highlighted market pressures. In this sense, the further development of a (universalistic) welfare state certainly helps mitigate the adverse health effects of unemployment and, therefore, the future costs of both individuals' health and welfare spending. In addition, the presence of a working partner is crucial for reducing the health consequences of employment instability. Therefore, policies aiming to increase female labor market participation should be promoted, especially in those contexts where the welfare state is less developed. Moreover, my results support the significance of taking account of a gender perspective in health research. The findings of the three articles show that job loss, unemployment, and precarious employment, in general, have adverse effects on men's health but less or absent consequences for women's health. Indeed, this suggests the importance of labor and health policies that consider and further distinguish the specific needs of the male and female labor force in Europe. Nevertheless, a further implication emerges: the health consequences of employment instability and de-standardization need to be investigated in light of the gender arrangements and the transforming gender relationships in specific cultural and institutional contexts. My results indeed seem to suggest that women's health advantage may be a transitory phenomenon, contingent on the predominant gendered institutional and cultural context. As the structural difference between men's and women's position in society is eroded, egalitarianism becomes the dominant normative status, so will probably be the gender difference in the health consequences of job loss and precariousness. Therefore, while gender equality in opportunities and roles is a desirable aspect for contemporary societies and a political goal that cannot be postponed further, this thesis raises a further and maybe more crucial question: What kind of equality should be pursued to provide men and women with both good life quality and equal chances in the public and private spheres? In this sense, I believe that social and labor policies aiming to reduce gender inequality in society should focus on improving women's integration into the labor market, implementing policies targeting men, and facilitating their involvement in the private sphere of life. Equal redistribution of social roles could activate a crucial transformation of gender roles and the cultural models that sustain and still legitimate gender inequality in Western societies. KW - unemployment KW - employment precariousness KW - self-rated health KW - gender KW - family KW - welfare and gender regimes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536723 ER - TY - THES A1 - Gäbert, Chris T1 - Light-responsive polymer systems aiming towards programmable friction T1 - Lichtschaltbare Polymersysteme mit dem Ziel programmierbarer Reibung BT - the application driven development of 9-anthracene ester-terminated silicone oils and spiropyran graft copolymers as novel functional materials BT - die anwendungsorientierte Entwicklung von 9-Anthracenester-terminierten Silikonölen und Spiropyran-Pfropfcopolymeren als neuartige Funktionsmaterialien N2 - The development of novel programmable materials aiming to control friction in real-time holds potential to facilitate innovative lubrication solutions for reducing wear and energy losses. This work describes the integration of light-responsiveness into two lubricating materials, silicon oils and polymer brush surfaces. The first part focusses on the assessment on 9-anthracene ester-terminated polydimethylsiloxanes (PDMS-A) and, in particular, on the variability of rheological properties and the implications that arise with UV-light as external trigger. The applied rheometer setup contains an UV-transparent quartz-plate, which enables radiation and simultaneous measurement of the dynamic moduli. UV-A radiation (354 nm) triggers the cycloaddition reaction between the terminal functionalities of linear PDMS, resulting in chain extension. The newly-formed anthracene dimers cleave by UV-C radiation (254 nm) or at elevated temperatures (T > 130 °C). The sequential UV-A radiation and thermal reprogramming over three cycles demonstrate high conversions and reproducible programming of rheological properties. In contrast, the photochemical back reaction by UV-C is incomplete and can only partially restore the initial rheological properties. The dynamic moduli increase with each cycle in photochemical programming, presumably resulting from a chain segment re-arrangement as a result of the repeated partial photocleavage and subsequent chain length-dependent dimerization. In addition, long periods of radiation cause photooxidative degradation, which damages photo-responsive functions and consequently reduces the programming range. The absence of oxygen, however, reduces undesired side reactions. Anthracene-functionalized PDMS and native PDMS mix depending on the anthracene ester content and chain length, respectively, and allow fine-tuning of programmable rheological properties. The work shows the influence of mixing conditions during the photoprogramming step on the rheological properties, indicating that material property gradients induced by light attenuation along the beam have to be considered. Accordingly, thin lubricant films are suggested as potential application for light-programmable silicon fluids. The second part compares strategies for the grafting of spiropyran (SP) containing copolymer brushes from Si wafers and evaluates the light-responsiveness of the surfaces. Pre-experiments on the kinetics of the thermally initiated RAFT copolymerization of 2-hydroxyethyl acrylate (HEA) and spiropyran acrylate (SPA) in solution show, first, a strong retardation by SP and, second, the dependence of SPA polymerization on light. Surprisingly, the copolymerization of SPA is inhibited in the dark. These findings contribute to improve the synthesis of polar, spiropyran-containing copolymers. The comparison between initiator systems for the grafting-from approach indicates PET-RAFT superior to thermally initiated RAFT, suggesting a more efficient initiation of surface-bound CTA by light. Surface-initiated polymerization via PET-RAFT with an initiator system of EosinY (EoY) and ascorbic acid (AscA) facilitates copolymer synthesis from HEA and 5-25 mol% SPA. The resulting polymer film with a thickness of a few nanometers was detected by atomic force microscopy (AFM) and ellipsometry. Water contact angle (CA) measurements demonstrate photo-switchable surface polarity, which is attributed to the photoisomerization between non-polar spiropyran and zwitterionic merocyanine isomer. Furthermore, the obtained spiropyran brushes show potential for further studies on light-programmable properties. In this context, it would be interesting to investigate whether swollen spiropyran-containing polymers change their configuration and thus their film thickness under the influence of light. In addition, further experiments using an AFM or microtribometer should evaluate whether light-programmable solvation enables a change in frictional properties between polymer brush surfaces. N2 - Die Entwicklung neuartiger programmierbarer Materialien zur Anpassung von Reibung in Echtzeit birgt Potenzial, innovative Schmierungslösungen zu ermöglichen, um Verschleiß und Energieverluste zu reduzieren. Die vorliegende Arbeit beschreibt die Integration von Lichtlichtschaltbarkeit in zwei schmierende Materialien, Silikonöle und Oberflächen mit Polymerbürsten. Der erste Teil konzentriert sich auf die Bewertung von 9-Anthracenester-terminierten Polydimethylsiloxanen (PDMS-As) und insbesondere auf die Veränderbarkeit der rheologischen Eigenschaften sowie Implikationen, die sich bei der Verwendung von UV-Licht als externe Trigger ergeben. Der verwendete Rheometeraufbau enthält eine UV-transparente Quarzplatte, welche somit die Bestrahlung bei gleichzeitiger Messung der dynamischen Moduli ermöglicht. UV-A-Strahlung (354 nm) löst die Cycloadditionsreaktion zwischen den endständigen Funktionalitäten des linearen PDMS aus und führt so zu einer Kettenverlängerung. Die dabei gebildeten Anthracen-Dimere werden durch UV-C-Strahlung (254 nm) oder bei erhöhten Temperaturen (T > 130 °C) gespalten. Die sequentielle UV-A-Bestrahlung und thermische Reprogrammierung in drei Schaltzyklen führen zu hohen Umsätzen und zeigen reproduzierbar einstellbare Materialeigenschaften. Im Gegensatz dazu ist die photochemische Rückreaktion durch UV-C unvollständig und kann die ursprünglichen rheologischen Eigenschaften nur teilweise wiederherstellen. Die dynamischen Module nehmen mit jedem Zyklus der photochemischen Programmierung zu, was vermutlich auf eine Neuanordnung der Kettensegmente infolge der wiederholten partiellen Photospaltung und der anschließenden kettenlängenabhängigen Dimerisierung zurückzuführen ist. Darüber hinaus kommt es bei langer Bestrahlungsdauer zu einem photooxidativen Abbau, der die photoschaltbaren Funktionen des Silikons beeinträchtigt und folglich den Programmierbereich verringert. Der Ausschluss von Sauerstoff reduziert jedoch unerwünschte Nebenreaktionen. Anthracenfunktionalisiertes PDMS und unfunktionalisiertes PDMS mischen sich in Abhängigkeit vom Anthracenestergehalt beziehungsweise der Kettenlänge und ermöglichen die Feinabstimmung programmierbarer rheologischer Eigenschaften. Die Arbeit zeigt den Einfluss der Mischungsbedingungen während des Photoprogrammierungsschritts auf die rheologischen Eigenschaften, was darauf hindeutet, dass Materialeigenschaftsgradienten, die durch Lichtabschwächung entlang des Lichtstrahls entstehen, berücksichtigt werden müssen. Entsprechend werden dünne Schmiermittelfilme als mögliche Anwendung für lichtprogrammierbare Silikonöle vorgeschlagen. Der zweite Teil vergleicht ‚grafting-from‘-Methoden zur Synthese Spiropyran(SP)-haltiger Copolyme auf Si-Wafern und bewertet die Lichtschaltbarkeit der Oberflächeneigenschaften. Vorversuche zur Kinetik der thermisch initiierten RAFT-Copolymerisation von 2-Hydroxyethylacrylat (HEA) und Spiropyranacrylat (SPA) in Lösung zeigen erstens, eine starke Retardierung durch SP, und zweitens, die Lichtabhängigkeit der SPA-Polymerisation. Überraschenderweise ist die Copolymerisation von SPA im Dunkeln gehemmt. Diese Ergebnisse tragen dazu bei, die Synthese von polaren, spiropyranhaltigen Copolymeren zu verbessern. Der Vergleich zwischen Initiatorsystemen für den ‚grafting-from‘-Ansatz zeigt, dass PET-RAFT der thermisch initiierten RAFT überlegen ist, was auf eine effizientere Initiierung von oberflächengebundenem CTA durch Licht hindeutet. Die oberflächeninitierte Polymerisation via PET-RAFT mit einem Initiatorsystem aus EosinY (EoY) und Ascorbinsäure (AscA) ermöglicht die Copolymersynthese aus HEA und 5-25 mol% SPA. Der entstandene Polymerfilm mit einer Dicke von einigen Nanometern wurde mittels Rasterkraftmikroskopie (AFM) und Ellipsometrie nachgewiesen. Die Messungen des Wasserkontaktwinkels (CA) zeigt eine photoschaltbare Oberflächenpolarität, welche der Photoisomerisierung zwischen unpolaren Spiropyran und zwitterionischen Merocyanin-Isomer zugeschrieben wird. Darüber hinaus zeigen die erhaltenen Spiropyranbürsten Potenzial für weitere Untersuchungen zu lichtprogrammierbaren Eigenschaften. In diesem Zusammenhang wäre es interessant weiterführend zu untersuchen, ob gequollene spiropyranhaltige Polymere unter Lichteinfluss tatsächlich ihre Konfiguration und damit ihre Filmdicke ändern. Darüber hinaus wäre es sinnvoll, mit Hilfe eines AFM oder Mikrotribometers zu evaluieren, ob diese lichtprogrammierbare Solvatisierung eine Veränderung der Reibungseigenschaften zwischen Polymerbürstenoberflächen ermöglicht. KW - programmable friction KW - lubricant KW - light-programmable viscosity KW - spiropyran copolymer KW - grafting-from Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553380 ER - TY - THES A1 - Mazzanti, Stefano T1 - Novel photocatalytic processes mediated by carbon nitride photocatalysis T1 - Neuartige photokatalytische Prozesse vermittelt durch Kohlenstoffnitrid-Photokatalyse N2 - The key to reduce the energy required for specific transformations in a selective manner is the employment of a catalyst, a very small molecular platform that decides which type of energy to use. The field of photocatalysis exploits light energy to shape one type of molecules into others, more valuable and useful. However, many challenges arise in this field, for example, catalysts employed usually are based on metal derivatives, which abundance is limited, they cannot be recycled and are expensive. Therefore, carbon nitrides materials are used in this work to expand horizons in the field of photocatalysis. Carbon nitrides are organic materials, which can act as recyclable, cheap, non-toxic, heterogeneous photocatalysts. In this thesis, they have been exploited for the development of new catalytic methods, and shaped to develop new types of processes. Indeed, they enabled the creation of a new photocatalytic synthetic strategy, the dichloromethylation of enones by dichloromethyl radical generated in situ from chloroform, a novel route for the making of building blocks to be used for the productions of active pharmaceutical compounds. Then, the ductility of these materials allowed to shape carbon nitride into coating for lab vials, EPR capillaries, and a cell of a flow reactor showing the great potential of such flexible technology in photocatalysis. Afterwards, their ability to store charges has been exploited in the reduction of organic substrates under dark conditions, gaining new insights regarding multisite proton coupled electron transfer processes. Furthermore, the combination of carbon nitrides with flavins allowed the development of composite materials with improved photocatalytic activity in the CO2 photoreduction. Concluding, carbon nitrides are a versatile class of photoactive materials, which may help to unveil further scientific discoveries and to develop a more sustainable future. N2 - Der Schlüssel zur selektiven Reduzierung des Energieverbrauchs für bestimmte Reaktionen ist der Einsatz eines Katalysators, der entscheidet, welche Art von Energie verwendet werden soll. Bei der Photokatalyse wird Lichtenergie verwendet, um eine Art von Molekülen in andere umzuwandeln, die wertvoller und nützlicher sind. Im Gebiet der Photokatalyse gibt es jedoch viele Herausforderungen. Beispielsweise besitzen die verwendeten Katalysatoren üblicherweise eine Basis aus seltenen Erden, deren Verfügbarkeit begrenzt ist, die teuer sind und die nicht recycelt werden können. Daher werden in dieser Arbeit Kohlenstoffnitridmaterialien verwendet, um den Horizont der Photokatalyse zu erweitern. Kohlenstoffnitride sind organische Materialien, die als recycelbare, billige, ungiftige, heterogene Photokatalysatoren fungieren können. In dieser Arbeit wurden sie für die Entwicklung neuer katalytischer Methoden und in neuen Prozesstypen eingesetzt. Es konnte gezeigt werden, dass Kohlenstoffnitride für die Dichlormethylierung von Enonen, durch in-situ aus Chloroform erzeugte Dichlormethylradikale, benutzt werden können. Dies stellt eine neue photokatalytische Synthesestrategie dar und kann zur Herstellung von Bausteinen für pharmazeutische Wirkstoffe verwendet werden. Die Eigenschaften von Kohlenstoffnitriden ermöglichten es, Laborfläschchen, EPR-Kapillaren und die Zelle eines Durchflussreaktors damit zu beschichten, was ein großes Potenzial in der Photokatalyse darstellt. Im Weiteren wurde die Fähigkeit der Kohlenstoffnitride, Ladungen zu speichern, bei der Reduktion organischer Substrate unter lichtfreien Bedingungen genutzt, um neue Erkenntnisse über protonengekoppelte Elektronentransferprozesse an mehreren katalytischen Zentren zu gewinnen. Zusätzlich konnte gezeigt werden, dass aus Kohlenstoffnitriden und Flavinen Verbundwerkstoffen mit verbesserter photokatalytischer Aktivität bei der CO2-Photoreduktion hergestellt werden können. Zusammenfassend lässt sich sagen, dass Kohlenstoffnitride eine vielversprechende Klasse photoaktiver Materialien sind, die dazu beitragen können eine nachhaltigere Zukunft zu gestalten. KW - heterogeneous photocatalysis KW - carbon nitrides KW - organic synthesis KW - heterogene Photokatalyse KW - Kohlenstoffnitriden KW - organische Synthese Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-542099 ER - TY - THES A1 - Simsek, Ibrahim T1 - Ink-based preparation of chalcogenide perovskites as thin films for PV applications T1 - Präparation von Chalkogeniden Perowskiten auf Basis von molekularer Tinte als Dünnschichten für PV Anwendungen N2 - The increasing demand for energy in the current technological era and the recent political decisions about giving up on nuclear energy diverted humanity to focus on alternative environmentally friendly energy sources like solar energy. Although silicon solar cells are the product of a matured technology, the search for highly efficient and easily applicable materials is still ongoing. These properties made the efficiency of halide perovskites comparable with silicon solar cells for single junctions within a decade of research. However, the downside of halide perovskites are poor stability and lead toxicity for the most stable ones. On the other hand, chalcogenide perovskites are one of the most promising absorber materials for the photovoltaic market, due to their elemental abundance and chemical stability against moisture and oxygen. In the search of the ultimate solar absorber material, combining the good optoelectronic properties of halide perovskites with the stability of chalcogenides could be the promising candidate. Thus, this work investigates new techniques for the synthesis and design of these novel chalcogenide perovskites, that contain transition metals as cations, e.g., BaZrS3, BaHfS3, EuZrS3, EuHfS3 and SrHfS3. There are two stages in the deposition techniques of this study: In the first stage, the binary compounds are deposited via a solution processing method. In the second stage, the deposited materials are annealed in a chalcogenide atmosphere to form the perovskite structure by using solid-state reactions. The research also focuses on the optimization of a generalized recipe for a molecular ink to deposit precursors of chalcogenide perovskites with different binaries. The implementation of the precursor sulfurization resulted in either binaries without perovskite formation or distorted perovskite structures, whereas some of these materials are reported in the literature as they are more favorable in the needle-like non-perovskite configuration. Lastly, there are two categories for the evaluation of the produced materials: The first category is about the determination of the physical properties of the deposited layer, e.g., crystal structure, secondary phase formation, impurities, etc. For the second category, optoelectronic properties are measured and compared to an ideal absorber layer, e.g., band gap, conductivity, surface photovoltage, etc. N2 - Der stetig wachsende Energieverbrauch in der aktuellen technologischen Ära und die kürzliche Entscheidung der Politik auf Nuklearenergie zu verzichten hat die Menschheit dazu geleitet sich auf alternative umweltfreundliche Energiequellen wie Solare Energie zu fokussieren. Obwohl Silizium Solarzellen das Produkt einer ausgereiften Technologie sind geht die Suche nach hocheffizienten Materialien, die einfach umzusetzen sind weiter. Diese Eigenschaften führten zur Vergleichbarkeit von Halogeniden Perowskiten mit Silizium in Einfachsolarzellen innerhalb eines Jahrzehnts der Forschung. Allerdings mangelt es bei Halogeniden Perowskiten an Stabilität und jene stabile haben eine Blei-Toxizität. Andererseits bieten Chalkogenide Perowskite aussichtsreiche Eigenschaften als Absorber Materialien für den Photovoltaik Markt auf Grund des hohen Vorkommens der Elemente auf dem Planeten und ihrer chemischen Stabilität in Luft. Auf der Suche nach dem ultimativen Absorber Material für Solarzellen könnte sich eine Kombination der guten optoelektronischen Eigenschaften von Halogeniden Perowskiten mit der Stabilität von Chalkogeniden als guter Kandidat herausstellen. Infolgedessen untersucht diese Arbeit neue Methoden für die Synthese und das Design dieser neuartigen Chalkogeniden Perowskite, welche Übergangsmetalle als Kationen enthalten, z.B. BaZrS3, BaHfS3, EuZrS3, EuHfS3 and SrHfS3. Es gibt zwei Schritte in den Methoden der Deposition in dieser Untersuchung: Im ersten Schritt werden die binären Verbindungen durch eine Lösungsmittelprozessierung auf dem Substrat aufgebracht. Daraufhin wird im zweiten Schritt das aufgetragene Material in einer Chalkogeniden Atmosphäre getempert, um die Perowskit Struktur durch Festkörperreaktion zu bilden. Die Untersuchung fokussiert sich außerdem auf die Optimierung eines generalisierten Rezeptes für molekulare Tinte zur Deposition eines Präkursors aus unterschiedlichen binären Verbindungen. Die Implementierung der Präkursor Schwefelung führt entweder zu einer Formation der binären Verbindungen ohne Perowskit Struktur oder in der verzerrten Perowskit Struktur, obwohl für manche dieser Materialien laut Literatur die nadelförmige nicht-Perowskit Struktur günstiger sein sollte. Zuletzt gibt es zwei Kategorien für die Evaluierung der hergestellten Materialien: Die erste Kategorie behandelt die Determinierung der physikalischen Eigenschaften der deponierten Dünnschicht, z.B. Kristallstruktur, Sekundärphasen, Unreinheiten. In der zweiten Kategorie werden die optoelektronischen Eigenschaften gemessen und mit einem idealen Absorber verglichen, z.B. Bandlücke, Leitfähigkeit, Oberflächen Photospannung, etc. KW - chalcogenide KW - perovskite KW - Perowskite KW - Chalkogenide Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572711 ER - TY - THES A1 - Brill, Fabio Alexander T1 - Applications of machine learning and open geospatial data in flood risk modelling N2 - Der technologische Fortschritt erlaubt es, zunehmend komplexe Vorhersagemodelle auf Basis immer größerer Datensätze zu produzieren. Für das Risikomanagement von Naturgefahren sind eine Vielzahl von Modellen als Entscheidungsgrundlage notwendig, z.B. in der Auswertung von Beobachtungsdaten, für die Vorhersage von Gefahrenszenarien, oder zur statistischen Abschätzung der zu erwartenden Schäden. Es stellt sich also die Frage, inwiefern moderne Modellierungsansätze wie das maschinelle Lernen oder Data-Mining in diesem Themenbereich sinnvoll eingesetzt werden können. Zusätzlich ist im Hinblick auf die Datenverfügbarkeit und -zugänglichkeit ein Trend zur Öffnung (open data) zu beobachten. Thema dieser Arbeit ist daher, die Möglichkeiten und Grenzen des maschinellen Lernens und frei verfügbarer Geodaten auf dem Gebiet der Hochwasserrisikomodellierung im weiteren Sinne zu untersuchen. Da dieses übergeordnete Thema sehr breit ist, werden einzelne relevante Aspekte herausgearbeitet und detailliert betrachtet. Eine prominente Datenquelle im Bereich Hochwasser ist die satellitenbasierte Kartierung von Überflutungsflächen, die z.B. über den Copernicus Service der Europäischen Union frei zur Verfügung gestellt werden. Große Hoffnungen werden in der wissenschaftlichen Literatur in diese Produkte gesetzt, sowohl für die akute Unterstützung der Einsatzkräfte im Katastrophenfall, als auch in der Modellierung mittels hydrodynamischer Modelle oder zur Schadensabschätzung. Daher wurde ein Fokus in dieser Arbeit auf die Untersuchung dieser Flutmasken gelegt. Aus der Beobachtung, dass die Qualität dieser Produkte in bewaldeten und urbanen Gebieten unzureichend ist, wurde ein Verfahren zur nachträglichenVerbesserung mittels maschinellem Lernen entwickelt. Das Verfahren basiert auf einem Klassifikationsalgorithmus der nur Trainingsdaten von einer vorherzusagenden Klasse benötigt, im konkreten Fall also Daten von Überflutungsflächen, nicht jedoch von der negativen Klasse (trockene Gebiete). Die Anwendung für Hurricane Harvey in Houston zeigt großes Potenzial der Methode, abhängig von der Qualität der ursprünglichen Flutmaske. Anschließend wird anhand einer prozessbasierten Modellkette untersucht, welchen Einfluss implementierte physikalische Prozessdetails auf das vorhergesagte statistische Risiko haben. Es wird anschaulich gezeigt, was eine Risikostudie basierend auf etablierten Modellen leisten kann. Solche Modellketten sind allerdings bereits für Flusshochwasser sehr komplex, und für zusammengesetzte oder kaskadierende Ereignisse mit Starkregen, Sturzfluten, und weiteren Prozessen, kaum vorhanden. Im vierten Kapitel dieser Arbeit wird daher getestet, ob maschinelles Lernen auf Basis von vollständigen Schadensdaten einen direkteren Weg zur Schadensmodellierung ermöglicht, der die explizite Konzeption einer solchen Modellkette umgeht. Dazu wird ein staatlich erhobener Datensatz der geschädigten Gebäude während des schweren El Niño Ereignisses 2017 in Peru verwendet. In diesem Kontext werden auch die Möglichkeiten des Data-Mining zur Extraktion von Prozessverständnis ausgelotet. Es kann gezeigt werden, dass diverse frei verfügbare Geodaten nützliche Informationen für die Gefahren- und Schadensmodellierung von komplexen Flutereignissen liefern, z.B. satellitenbasierte Regenmessungen, topographische und hydrographische Information, kartierte Siedlungsflächen, sowie Indikatoren aus Spektraldaten. Zudem zeigen sich Erkenntnisse zu den Schädigungsprozessen, die im Wesentlichen mit den vorherigen Erwartungen in Einklang stehen. Die maximale Regenintensität wirkt beispielsweise in Städten und steilen Schluchten stärker schädigend, während die Niederschlagssumme in tiefliegenden Flussgebieten und bewaldeten Regionen als aussagekräftiger befunden wurde. Ländliche Gebiete in Peru weisen in der präsentierten Studie eine höhere Vulnerabilität als die Stadtgebiete auf. Jedoch werden auch die grundsätzlichen Grenzen der Methodik und die Abhängigkeit von spezifischen Datensätzen and Algorithmen offenkundig. In der übergreifenden Diskussion werden schließlich die verschiedenen Methoden – prozessbasierte Modellierung, prädiktives maschinelles Lernen, und Data-Mining – mit Blick auf die Gesamtfragestellungen evaluiert. Im Bereich der Gefahrenbeobachtung scheint eine Fokussierung auf neue Algorithmen sinnvoll. Im Bereich der Gefahrenmodellierung, insbesondere für Flusshochwasser, wird eher die Verbesserung von physikalischen Modellen, oder die Integration von prozessbasierten und statistischen Verfahren angeraten. In der Schadensmodellierung fehlen nach wie vor die großen repräsentativen Datensätze, die für eine breite Anwendung von maschinellem Lernen Voraussetzung ist. Daher ist die Verbesserung der Datengrundlage im Bereich der Schäden derzeit als wichtiger einzustufen als die Auswahl der Algorithmen. N2 - Technological progress allows for producing ever more complex predictive models on the basis of increasingly big datasets. For risk management of natural hazards, a multitude of models is needed as basis for decision-making, e.g. in the evaluation of observational data, for the prediction of hazard scenarios, or for statistical estimates of expected damage. The question arises, how modern modelling approaches like machine learning or data-mining can be meaningfully deployed in this thematic field. In addition, with respect to data availability and accessibility, the trend is towards open data. Topic of this thesis is therefore to investigate the possibilities and limitations of machine learning and open geospatial data in the field of flood risk modelling in the broad sense. As this overarching topic is broad in scope, individual relevant aspects are identified and inspected in detail. A prominent data source in the flood context is satellite-based mapping of inundated areas, for example made openly available by the Copernicus service of the European Union. Great expectations are directed towards these products in scientific literature, both for acute support of relief forces during emergency response action, and for modelling via hydrodynamic models or for damage estimation. Therefore, a focus of this work was set on evaluating these flood masks. From the observation that the quality of these products is insufficient in forested and built-up areas, a procedure for subsequent improvement via machine learning was developed. This procedure is based on a classification algorithm that only requires training data from a particular class to be predicted, in this specific case data of flooded areas, but not of the negative class (dry areas). The application for hurricane Harvey in Houston shows the high potential of this method, which depends on the quality of the initial flood mask. Next, it is investigated how much the predicted statistical risk from a process-based model chain is dependent on implemented physical process details. Thereby it is demonstrated what a risk study based on established models can deliver. Even for fluvial flooding, such model chains are already quite complex, though, and are hardly available for compound or cascading events comprising torrential rainfall, flash floods, and other processes. In the fourth chapter of this thesis it is therefore tested whether machine learning based on comprehensive damage data can offer a more direct path towards damage modelling, that avoids explicit conception of such a model chain. For that purpose, a state-collected dataset of damaged buildings from the severe El Niño event 2017 in Peru is used. In this context, the possibilities of data-mining for extracting process knowledge are explored as well. It can be shown that various openly available geodata sources contain useful information for flood hazard and damage modelling for complex events, e.g. satellite-based rainfall measurements, topographic and hydrographic information, mapped settlement areas, as well as indicators from spectral data. Further, insights on damaging processes are discovered, which mainly are in line with prior expectations. The maximum intensity of rainfall, for example, acts stronger in cities and steep canyons, while the sum of rain was found more informative in low-lying river catchments and forested areas. Rural areas of Peru exhibited higher vulnerability in the presented study compared to urban areas. However, the general limitations of the methods and the dependence on specific datasets and algorithms also become obvious. In the overarching discussion, the different methods – process-based modelling, predictive machine learning, and data-mining – are evaluated with respect to the overall research questions. In the case of hazard observation it seems that a focus on novel algorithms makes sense for future research. In the subtopic of hazard modelling, especially for river floods, the improvement of physical models and the integration of process-based and statistical procedures is suggested. For damage modelling the large and representative datasets necessary for the broad application of machine learning are still lacking. Therefore, the improvement of the data basis in the field of damage is currently regarded as more important than the selection of algorithms. KW - flood risk KW - machine learning KW - open data KW - damage modelling KW - data-mining KW - Schadensmodellierung KW - Data-Mining KW - Hochwasserrisiko KW - maschinelles Lernen KW - offene Daten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-555943 ER - TY - THES A1 - Jongejans, Loeka Laura T1 - Organic matter stored in ice-rich permafrost T1 - Ablagerung von organischem Kohlenstoff in eisreichem Permafrost BT - future permafrost thaw and greenhouse gas release BT - zukünftige Permafrosttauen und Treibhausgasemissionen N2 - The Arctic is changing rapidly and permafrost is thawing. Especially ice-rich permafrost, such as the late Pleistocene Yedoma, is vulnerable to rapid and deep thaw processes such as surface subsidence after the melting of ground ice. Due to permafrost thaw, the permafrost carbon pool is becoming increasingly accessible to microbes, leading to increased greenhouse gas emissions, which enhances the climate warming. The assessment of the molecular structure and biodegradability of permafrost organic matter (OM) is highly needed. My research revolves around the question “how does permafrost thaw affect its OM storage?” More specifically, I assessed (1) how molecular biomarkers can be applied to characterize permafrost OM, (2) greenhouse gas production rates from thawing permafrost, and (3) the quality of OM of frozen and (previously) thawed sediments. I studied deep (max. 55 m) Yedoma and thawed Yedoma permafrost sediments from Yakutia (Sakha Republic). I analyzed sediment cores taken below thermokarst lakes on the Bykovsky Peninsula (southeast of the Lena Delta) and in the Yukechi Alas (Central Yakutia), and headwall samples from the permafrost cliff Sobo-Sise (Lena Delta) and the retrogressive thaw slump Batagay (Yana Uplands). I measured biomarker concentrations of all sediment samples. Furthermore, I carried out incubation experiments to quantify greenhouse gas production in thawing permafrost. I showed that the biomarker proxies are useful to assess the source of the OM and to distinguish between OM derived from terrestrial higher plants, aquatic plants and microbial activity. In addition, I showed that some proxies help to assess the degree of degradation of permafrost OM, especially when combined with sedimentological data in a multi-proxy approach. The OM of Yedoma is generally better preserved than that of thawed Yedoma sediments. The greenhouse gas production was highest in the permafrost sediments that thawed for the first time, meaning that the frozen Yedoma sediments contained most labile OM. Furthermore, I showed that the methanogenic communities had established in the recently thawed sediments, but not yet in the still-frozen sediments. My research provided the first molecular biomarker distributions and organic carbon turnover data as well as insights in the state and processes in deep frozen and thawed Yedoma sediments. These findings show the relevance of studying OM in deep permafrost sediments. N2 - Die Arktis ist eine der sich am schnellsten verändernden Regionen der Erde, was zum tauen des dortigen Permafrosts führt. Eisreicher Permafrost, wie der spätpleistozäne Yedoma, ist besonders anfällig für schnelle und tiefe Auftauprozesse infolge von Absenkungen der Oberfläche nach dem Schmelzen des Grundeises. Durch das Auftauen des Permafrosts wird der im Permafrost gespeicherte Kohlenstoff für Mikroben zunehmend zugänglich, was zu erhöhten Treibhausgasemissionen führt und die Klimaerwärmung verstärkt. Die Untersuchung der molekularen Struktur und der biologischen Abbaubarkeit von organischem Material (OM) im Permafrost ist dringend erforderlich. In meiner Forschung geht es um die zentrale Frage inwieweit das Auftauen des Permafrost die Speicherfähigkeit von OM beeinflusst. Insbesondere untersuchte ich (1) wie molekulare Biomarker bei der Charakterisierung von Permafrost-OM verwendet werden können, (2) Treibhausgasproduktionsraten in auftauendem Permafrost und (3) die Qualität von OM in gefrorenen und (vorher) aufgetauten Sedimenten. Dazu habe ich tiefe (bis zu 55 m) Yedoma und aufgetaute Yedoma Permafrostsedimente aus Jakutien (Republik Sacha) untersucht. Es wurden Sedimentkerne unter Thermokarstseen auf der Bykovsky-Halbinsel (südöstlich des Lenadeltas) und im Yukechi-Alas (Zentraljakutien) entnommen, und deren Biomarkerkonzentrationen gemessen. Desweiteren wurden Bodenproben von der Permafrostklippe Sobo-Sise (Lenadelta) und der Taurutschung Batagai (Jana-Hochland) genommen und untersucht. Darüber hinaus habe ich Inkubationsexperimente durchgeführt, um die Treibhausgasproduktion in auftauenden Permafrost zu quantifizieren. Ich habe gezeigt, dass Biomarker-Proxies nützlich sind, um die Quelle des OM zu ermitteln und zwischen OM aus Landpflanzen, Wasserpflanzen und mikrobieller Aktivität zu unterscheiden. Außerdem sind einige Proxies hilfreich, den Abbaugrad von Permafrost-OM zu beurteilen. Dies trifft insbesondere in Kombination mit sedimentologischen Daten in einem Multi-Proxy-Ansatz. Ich zeigte dass der OM von Yedoma im Allgemeinen besser erhalten ist als der von aufgetauten Yedoma-Sedimenten. Die Treibhausgasproduktion in den erstmalig auftauenden Permafrostsedimenten war am höchsten. Dies bedeutet, dass die gefrorenen Yedoma-Sedimente das meiste labile OM enthielten. Außerdem zeigte ich, dass sich die methanproduzierenden Gemeinschaften in den frisch aufgetauten Sedimenten etabliert hatten, jedoch nicht in den noch gefrorenen Sedimenten. Meiner Forschung hat die ersten molekularen Biomarkerverteilungen und Kohlenstoffumsatzdaten geliefert und Einsichten in den Zustand und Prozesse von gefrorenen und aufgetauten Yedoma-Sedimenten geschaffen. Diese Ergebnisse demonstrieren die Relevanz der Untersuchung von OM in tiefen Permafrostsedimenten. N2 - Het Noordpoolgebied verandert snel en permafrost ontdooit. Met name ijsrijke permafrost, zoals Yedoma uit het laat Pleistoceen, is gevoelig voor snelle en diepe dooiprocessen als gevolg van bodemdaling na het smelten van bodemijs. Door het ontdooien van permafrost wordt het permafrostkoolstofreservoir beter toegankelijk voor microben, wat tot verhoogde broeikasgasemissies leidt en de klimaatopwarming versterkt. Het is van groot belang om de moleculaire structuur en de biologische afbreekbaarheid van organisch materiaal (OM) in permafrost vast te leggen. Mijn onderzoek draait om de vraag "hoe beinvloedt permafrostdooi de OM-opslag?" Specifiek heb ik onderzocht (1) hoe moleculaire biomarkers kunnen worden gebruikt om permafrost-OM te karakteriseren, (2) wat broeikasgasproductiesnelheden in ontdooiende permafrost zijn en (3) wat de kwaliteit is van het OM in bevroren en (eerder) ontdooide sedimenten. Ik heb diepe (max. 55 m) Yedoma en ontdooide Yedoma permafrostsedimenten uit Jakoetië (republiek Sacha) onderzocht. Sedimentkernen zijn genomen onder thermokarstmeren op het Bykovsky schiereiland (ten zuidoosten van de Lenadelta) en in de Yukechi Alas (centraal Jakoetië). Ook zijn bodemmonsters genomen van de permafrostklif Sobo-Sise (Lenadelta) en de zogenaamde thaw slump Batagai (Jana-hoogvlakte). In alle monsters heb ik de biomarkerconcentraties gemeten. Ook heb ik incubatie-experimenten uitgevoerd om de broeikasgasproductie in ontdooiende permafrost te kwantificeren. Mijn onderzoek wijst uit dat de biomarkerproxies nuttig zijn bij het vaststellen van de bron van het OM en om onderscheid te kunnen maken tussen OM van landplanten, waterplanten en OM afkomstig van microbiële activiteit. Daarnaast heb ik aangetoond dat sommige proxies nuttig zijn om de mate van degradatie van het OM vast te stellen, vooral in combinatie met sedimentologische data in een multi-proxy-benadering. Het blijkt dat het OM in Yedoma over het algemeen beter bewaard gebleven is dan het OM in ontdooide Yedoma-sedimenten. De broeikasgasproductie bleek het hoogst in de voor het eerst ontdooide permafrostsedimenten, wat betekent dat de bevroren Yedoma-sedimenten het meeste labiele OM bevatten. Bovendien heb ik aangetoond dat de methaan-producerende gemeenschappen zich wel in de recentelijk ontdooide sedimenten hebben gevestigd, maar nog niet in de nog bevroren sedimenten. Mijn onderzoek heeft de eerste moleculaire biomarker- en koolstofomzetdata en inzichten opgeleverd in de toestand en processen van diepe, bevroren en ontdooide Yedoma-sedimenten. Deze resultaten tonen de relevantie van het bestuderen van OM in diepe permafrostsedimenten. KW - permafrost sediments KW - organic matter KW - molecular biomarkers KW - anaerobic incubation experiments KW - Russian Arctic KW - Permafrostsedimente KW - organisches Material KW - molekulare Biomarker KW - anaerobe Inkubationensexperimente KW - russische Arktis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-564911 ER - TY - THES A1 - Siegmund, Nicole T1 - Wind driven soil particle uptake Quantifying drivers of wind erosion across the particle size spectrum T1 - Partikelaufwirbelung durch Wind - Über die Quantifizierung von Winderosion über das ganze Partikel-Größenspektrum N2 - Among the multitude of geomorphological processes, aeolian shaping processes are of special character, Pedogenic dust is one of the most important sources of atmospheric aerosols and therefore regarded as a key player for atmospheric processes. Soil dust emissions, being complex in composition and properties, influence atmospheric processes and air quality and has impacts on other ecosystems. In this because even though their immediate impact can be considered low (exceptions exist), their constant and large-scale force makes them a powerful player in the earth system. dissertation, we unravel a novel scientific understanding of this complex system based on a holistic dataset acquired during a series of field experiments on arable land in La Pampa, Argentina. The field experiments as well as the generated data provide information about topography, various soil parameters, the atmospheric dynamics in the very lower atmosphere (4m height) as well as measurements regarding aeolian particle movement across a wide range of particle size classes between 0.2μm up to the coarse sand. The investigations focus on three topics: (a) the effects of low-scale landscape structures on aeolian transport processes of the coarse particle fraction, (b) the horizontal and vertical fluxes of the very fine particles and (c) the impact of wind gusts on particle emissions. Among other considerations presented in this thesis, it could in particular be shown, that even though the small-scale topology does have a clear impact on erosion and deposition patterns, also physical soil parameters need to be taken into account for a robust statistical modelling of the latter. Furthermore, specifically the vertical fluxes of particulate matter have different characteristics for the particle size classes. Finally, a novel statistical measure was introduced to quantify the impact of wind gusts on the particle uptake and its application on the provided data set. The aforementioned measure shows significantly increased particle concentrations during points in time defined as gust event. With its holistic approach, this thesis further contributes to the fundamental understanding of how atmosphere and pedosphere are intertwined and affect each other. N2 - Unter der Vielzahl geomorphologischer Prozesse nehmen äolische Formgebungsprozesse eine besondere Stellung ein, denn obwohl ihre unmittelbaren Auswirkungen als gering einzuschätzen sind (Ausnahmen existieren), sind sie aufgrund ihrer konstanten und großen Kraft ein mächtiger Akteur im Erdsystem. Pedogener Staub ist eine der wichtigsten Quellen atmosphärischer Aerosole und kann daher als Schlüsselfaktor für atmosphärische Prozesse angesehen werden. Bodenstaubemissionen, die in Zusammensetzung und Eigenschaften komplex sind, beeinflussen atmosphärische Prozesse und Luftqualität und haben Auswirkungen auf andere Ökosysteme. Um zum wissenschaftlichen Verständnis dieses komplexen Systems beizutragen, dokumentiert diese Arbeit eine Reihe von Veröffentlichungen, die alle auf einem ganzheitlichen Datensatz basieren, die während einer Reihe von Feldexperimenten auf Ackerland in La Pampa, Argentinien, gewonnen wurden. Die Feldexperimente sowie die generierten Daten liefern Informationen über Topographie, verschiedene Bodenparameter, die atmosphärische Dynamik in der unteren Atmosphäre (4 m Höhe) sowie Messungen zur äolischen Partikelbewegung über einen weiten Bereich von Partikelgrößenklassen zwischen 0,2μm und groben Sand. Die Untersuchungen konzentrieren sich auf drei Themen: Die Auswirkungen kleinräumiger Landschaftsstrukturen auf äolische Transportprozesse der groben Partikelfraktion, die horizontalen und vertikalen Strömungen der sehr feinen Partikel und der Einfluss von Windböen auf die Partikelemissionen. Neben anderen in dieser Arbeit vorgestellten Überlegungen konnte insbesondere gezeigt werden, dass, obwohl die kleinräumige Topologie einen deutlichen Einfluss auf Erosions- und Ablagerungsmuster hat, auch physikalische Bodenparameter für eine robuste statistische Modellierung berücksichtigt werden müssen. Darüber hinaus weisen speziell die vertikalen Feinstaubflüsse unterschiedliche Eigenschaften für die Partikelgrößenklassen auf. Schließlich wurde ein neuartiges statistisches Maß eingeführt, um den Einfluss von Windböen auf die Partikelkonzentration der Luft zu quantifizieren, und seine Anwendung auf den bereitgestellten Datensatz zeigt signifikant erhöhte Partikelkonzentrationen zu Zeitpunkten, die als Böen definiert wurden. Mit ihrem ganzheitlichen Ansatz trägt diese Arbeit weiter zum grundlegenden Verständnis bei, wie Atmosphäre und Pedosphäre miteinander verflochten sind und sich gegenseitig beeinflussen. KW - Winderosion KW - winderosion KW - PM10, PM2, PM1 KW - Horizontal flux KW - horizontaler Fluss KW - Vertical flux KW - vertikaler Fluss KW - Argentina KW - Argentinien KW - wind gusts KW - Windböen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574897 ER - TY - THES A1 - Pellegrino, Antonio T1 - miRNA profiling for diagnosis of chronic pain in polyneuropathy T1 - miRNA profiling zur Diagnose von chronischem Schmerz in Polyneuropathie N2 - This dissertation aimed to determine differential expressed miRNAs in the context of chronic pain in polyneuropathy. For this purpose, patients with chronic painful polyneuropathy were compared with age matched healthy patients. Taken together, all miRNA pre library preparation quality controls were successful and none of the samples was identified as an outlier or excluded for library preparation. Pre sequencing quality control showed that library preparation worked for all samples as well as that all samples were free of adapter dimers after BluePippin size selection and reached the minimum molarity for further processing. Thus, all samples were subjected to sequencing. The sequencing control parameters were in their optimal range and resulted in valid sequencing results with strong sample to sample correlation for all samples. The resulting FASTQ file of each miRNA library was analyzed and used to perform a differential expression analysis. The differentially expressed and filtered miRNAs were subjected to miRDB to perform a target prediction. Three of those four miRNAs were downregulated: hsa-miR-3135b, hsa-miR-584-5p and hsa-miR-12136, while one was upregulated: hsa-miR-550a-3p. miRNA target prediction showed that chronic pain in polyneuropathy might be the result of a combination of miRNA mediated high blood flow/pressure and neural activity dysregulations/disbalances. Thus, leading to the promising conclusion that these four miRNAs could serve as potential biomarkers for the diagnosis of chronic pain in polyneuropathy. Since TRPV1 seems to be one of the major contributors of nociception and is associated with neuropathic pain, the influence of PKA phosphorylated ARMS on the sensitivity of TRPV1 as well as the part of AKAP79 during PKA phosphorylation of ARMS was characterized. Therefore, possible PKA-sites in the sequence of ARMS were identified. This revealed five canonical PKA-sites: S882, T903, S1251/52, S1439/40 and S1526/27. The single PKA-site mutants of ARMS revealed that PKA-mediated ARMS phosphorylation seems not to influence the interaction rate of TRPV1/ARMS. While phosphorylation of ARMST903 does not increase the interaction rate with TRPV1, ARMSS1526/27 is probably not phosphorylated and leads to an increased interaction rate. The calcium flux measurements indicated that the higher the interaction rate of TRPV1/ARMS, the lower the EC50 for capsaicin of TRPV1, independent of the PKA phosphorylation status of ARMS. In addition, the western blot analysis confirmed the previously observed TRPV1/ARMS interaction. More importantly, AKAP79 seems to be involved in the TRPV1/ARMS/PKA signaling complex. To overcome the problem of ARMS-mediated TRPV1 sensitization by interaction, ARMS was silenced by shRNA. ARMS silencing resulted in a restored TRPV1 desensitization without affecting the TRPV1 expression and therefore could be used as new topical therapeutic analgesic alternative to stop ARMS mediated TRPV1 sensitization. N2 - Ziel dieser Dissertation war es, differentiell exprimierte miRNAs im Kontext von chronischen Schmerzen bei Polyneuropathie zu bestimmen. Zu diesem Zweck wurden Patienten mit chronisch schmerzhafter Polyneuropathie und altersgleiche gesunde Patienten verglichen. Insgesamt waren alle Qualitätskontrollen zur Erstellung der miRNA-Bibliothek erfolgreich und keine der Proben wurde als Ausreißer identifiziert oder ausgeschlossen. Die Qualitätskontrolle vor der Sequenzierung zeigte, dass die Bibliothekserstellung für alle Proben funktionierte, sowie dass alle Proben frei von Adapterdimeren waren und die Mindestmolalität erreichten, woraufhin alle Proben sequenziert wurden. Die Kontrollparameter für die Sequenzierung lagen im optimalen Bereich und führten bei allen Proben zu gültigen Sequenzierungsergebnissen mit einer starken Korrelation zwischen den Proben. Die resultierende FASTQ-Datei jeder miRNA-Bibliothek wurde analysiert und für eine differenzielle Expressionsanalyse verwendet. Die differenziell exprimierten und gefilterten miRNAs wurden mittels miRDB analysiert, um eine Zielvorhersage zu erhalten. Drei dieser vier miRNAs wurden herunterreguliert: hsa-miR-3135b, hsa-miR-584-5p und hsa-miR-12136, während eine hochreguliert wurde: hsa-miR-550a-3p. Die miRNA-Zielvorhersage zeigte, dass chronische Schmerzen bei Polyneuropathie das Ergebnis von miRNA induziertem hohen Blutdruck und neuralen Aktivitätsdysregulationen sein könnten. Daraus ergibt sich die Schlussfolgerung, dass diese vier miRNAs als potenzielle Biomarker für die Diagnose von chronischen Schmerzen bei Polyneuropathie dienen könnten. Da TRPV1 mit Nozizeption und neuropathischen Schmerzen in Verbindung gebracht wird, wurde der Einfluss von PKA-phosphoryliertem ARMS auf die Sensitivität von TRPV1 sowie die Rolle von AKAP79 während der PKA-Phosphorylierung von ARMS untersucht. Dazu wurden mögliche PKA-Stellen in der Sequenz von ARMS identifiziert. Dies ergab fünf kanonische PKA-Stellen: S882, T903, S1251/52, S1439/40 und S1526/27. Die einzelnen ARMS-Mutanten zeigten, dass die PKA-vermittelte ARMS-Phosphorylierung die Interaktion von TRPV1/ARMS nicht zu beeinflussen scheint. Während die Phosphorylierung von ARMST903 die Interaktionsrate mit TRPV1 nicht erhöht, wird ARMSS1526/27 vermutlich nicht phosphoryliert und führt zu einer erhöhten Interaktionsrate. Zusätzlich zeigten Kalziumflussmessungen, dass der EC50 für Capsaicin von TRPV1 umso niedriger ist, je höher die Interaktionsrate von TRPV1/ARMS ist, unabhängig vom PKA-Phosphorylierungsstatus von ARMS. Darüber hinaus bestätigte die Western-Blot-Analyse, dass AKAP79 an dem TRPV1/ARMS/PKA-Signalkomplex beteiligt zu sein scheint. Letztlich sorgte die Stilllegung von ARMS mittels shRNA zu einer wiederhergestellten TRPV1-Desensibilisierung, ohne die TRPV1-Expression zu beeinträchtigen, und könnte als neue topische therapeutische Analgetika-Alternative verwendet werden. KW - miRNA KW - miRNA KW - chronic pain KW - chronischer Schmerz KW - polyneuropathy KW - Polyneuropathie KW - TRPV1 KW - TRPV1 KW - ARMS KW - ARMS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-583858 ER -