TY - THES A1 - Siegmund, Nicole T1 - Wind driven soil particle uptake Quantifying drivers of wind erosion across the particle size spectrum T1 - Partikelaufwirbelung durch Wind - Über die Quantifizierung von Winderosion über das ganze Partikel-Größenspektrum N2 - Among the multitude of geomorphological processes, aeolian shaping processes are of special character, Pedogenic dust is one of the most important sources of atmospheric aerosols and therefore regarded as a key player for atmospheric processes. Soil dust emissions, being complex in composition and properties, influence atmospheric processes and air quality and has impacts on other ecosystems. In this because even though their immediate impact can be considered low (exceptions exist), their constant and large-scale force makes them a powerful player in the earth system. dissertation, we unravel a novel scientific understanding of this complex system based on a holistic dataset acquired during a series of field experiments on arable land in La Pampa, Argentina. The field experiments as well as the generated data provide information about topography, various soil parameters, the atmospheric dynamics in the very lower atmosphere (4m height) as well as measurements regarding aeolian particle movement across a wide range of particle size classes between 0.2μm up to the coarse sand. The investigations focus on three topics: (a) the effects of low-scale landscape structures on aeolian transport processes of the coarse particle fraction, (b) the horizontal and vertical fluxes of the very fine particles and (c) the impact of wind gusts on particle emissions. Among other considerations presented in this thesis, it could in particular be shown, that even though the small-scale topology does have a clear impact on erosion and deposition patterns, also physical soil parameters need to be taken into account for a robust statistical modelling of the latter. Furthermore, specifically the vertical fluxes of particulate matter have different characteristics for the particle size classes. Finally, a novel statistical measure was introduced to quantify the impact of wind gusts on the particle uptake and its application on the provided data set. The aforementioned measure shows significantly increased particle concentrations during points in time defined as gust event. With its holistic approach, this thesis further contributes to the fundamental understanding of how atmosphere and pedosphere are intertwined and affect each other. N2 - Unter der Vielzahl geomorphologischer Prozesse nehmen äolische Formgebungsprozesse eine besondere Stellung ein, denn obwohl ihre unmittelbaren Auswirkungen als gering einzuschätzen sind (Ausnahmen existieren), sind sie aufgrund ihrer konstanten und großen Kraft ein mächtiger Akteur im Erdsystem. Pedogener Staub ist eine der wichtigsten Quellen atmosphärischer Aerosole und kann daher als Schlüsselfaktor für atmosphärische Prozesse angesehen werden. Bodenstaubemissionen, die in Zusammensetzung und Eigenschaften komplex sind, beeinflussen atmosphärische Prozesse und Luftqualität und haben Auswirkungen auf andere Ökosysteme. Um zum wissenschaftlichen Verständnis dieses komplexen Systems beizutragen, dokumentiert diese Arbeit eine Reihe von Veröffentlichungen, die alle auf einem ganzheitlichen Datensatz basieren, die während einer Reihe von Feldexperimenten auf Ackerland in La Pampa, Argentinien, gewonnen wurden. Die Feldexperimente sowie die generierten Daten liefern Informationen über Topographie, verschiedene Bodenparameter, die atmosphärische Dynamik in der unteren Atmosphäre (4 m Höhe) sowie Messungen zur äolischen Partikelbewegung über einen weiten Bereich von Partikelgrößenklassen zwischen 0,2μm und groben Sand. Die Untersuchungen konzentrieren sich auf drei Themen: Die Auswirkungen kleinräumiger Landschaftsstrukturen auf äolische Transportprozesse der groben Partikelfraktion, die horizontalen und vertikalen Strömungen der sehr feinen Partikel und der Einfluss von Windböen auf die Partikelemissionen. Neben anderen in dieser Arbeit vorgestellten Überlegungen konnte insbesondere gezeigt werden, dass, obwohl die kleinräumige Topologie einen deutlichen Einfluss auf Erosions- und Ablagerungsmuster hat, auch physikalische Bodenparameter für eine robuste statistische Modellierung berücksichtigt werden müssen. Darüber hinaus weisen speziell die vertikalen Feinstaubflüsse unterschiedliche Eigenschaften für die Partikelgrößenklassen auf. Schließlich wurde ein neuartiges statistisches Maß eingeführt, um den Einfluss von Windböen auf die Partikelkonzentration der Luft zu quantifizieren, und seine Anwendung auf den bereitgestellten Datensatz zeigt signifikant erhöhte Partikelkonzentrationen zu Zeitpunkten, die als Böen definiert wurden. Mit ihrem ganzheitlichen Ansatz trägt diese Arbeit weiter zum grundlegenden Verständnis bei, wie Atmosphäre und Pedosphäre miteinander verflochten sind und sich gegenseitig beeinflussen. KW - Winderosion KW - winderosion KW - PM10, PM2, PM1 KW - Horizontal flux KW - horizontaler Fluss KW - Vertical flux KW - vertikaler Fluss KW - Argentina KW - Argentinien KW - wind gusts KW - Windböen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574897 ER - TY - THES A1 - Schulte-Osseili, Christine T1 - Vom Monomer zum Glykopolymer T1 - From monomer to glycopolymer BT - Anwendung als Biofunktionalitäten auf Oberflächen und als Transportmoleküle BT - application as biofunctionalized surfaces and transport molecules N2 - Glykopolymere sind synthetische und natürlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich für viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen ermöglicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kostengünstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden über ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in wässriger Lösung untersucht. Die Polymere formten in wässriger Lösung Mizellen, bei denen der Zuckerblock an der Oberfläche der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberflächenbeschichtung über „Grafting from“ mit SI-ATRP oder über „Grafting to“ auf verschiedene Oberflächen gebunden. Durch die glykopolymerbschichteten Oberflächen konnte die Glykan Protein Wechselwirkung über spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsstärke untersucht. Die synthetisierten Glykopolymere könnten durch Austausch der Glykaneinheit für andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die bioverträglichen Glykopolymere wären alternativen für den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den Körper. Außerdem könnten die funktionalisierten Oberflächen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, könnten als antiadsorptive Oberflächenbeschichtung z.B. in der Zellbiologie eingesetzt werden. N2 - Glycopolymers are synthetic and naturally occurring polymers that carry a gylcan unit in the side chain of the polymer. Glycans are responsible for many biological processes due to the glycn-protein interaction. The involvement of glcans in these biological processes enables the imitation and analysis of interactions by suitable model coumponds, e.g. glycopolymers. This system of glycan-protein interaction will be investigated and studied by glycopolymers in order to demonstrate the specific and selective binding of proteins to glycopolymers. The proteins that are able to selectively bind carbohydrate structures are called lectins. In this dissertation different glycopolymers were synthesized. Care should be taken to ensure an effficient and cost-effective synthesis route. Different glycopolymers were produced by functionalized monomers with different sugars, such as mannose, lactose, galactose or N-acetyl-glucosamine as functional group. From these functionalized glycomonomers, glycopolymers were synthesized via ATRP and RAFT polymerization. The glycopolymers obtained were used as hydrophilic blocks in diblock copolymers and self-assembly in aqueous solution was investigated. In aqueoussolution, the polymers formed micelles in which the sugar block sits on the surface of the micelles. The micelles were loaded with a hydrophobic fluorescent dxe, which made it possible to determine the CMC of micelle formation. In additiom, the glycopolymers were bound to various surfaces as surface coatings via “grafting from” with SI-ATRP or via “grafting to”. Through the glycopolymer-coated surfaces, the glycan-protein interaction could be investigated by spectroscpic measurement methods such as SPR and microring resonators. The specific and selective binding of lectins to the glycopolymers was detected and the binding strength was investigated. The synthesised glycopolymers could become adressable for other lectins by exchanging the glycan unit and thus open up a broad field of other proteins. The biocompatible glycopolymers would be an alternative for use in iological processes as transporters of drugs or dyes into the body. In addtion, the functionalised surfaces could be used in diagnostics for regognition of lectins. The glycan, which do nit bind selectively and specifically to proetins, could be used as anit-adsoptive surface coatings, e.g. in cell biology. KW - Glykopolymere KW - Polymerisation KW - Oberflächenbeschichtung KW - Lektine KW - Glykan-Protein-Wechselwirkung KW - glycopolymers KW - polymerization KW - surface modification KW - lectins KW - glycan-protein interaction Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432169 ER - TY - THES A1 - Zeppenfeld, Stefan T1 - Vom Gast zum Gastwirt? BT - Türkische Arbeitswelten in West-Berlin T2 - Geschichte der Gegenwart N2 - Die Arbeitsmigration zählt zu den prägenden gesellschaftlichen Wandlungsprozessen der deutschen Nachkriegsgeschichte. 14 Millionen »Gastarbeiter« kamen zwischen 1955 und 1973 in die Bundesrepublik, etwa 3 Millionen von ihnen kehrten nicht in ihre Heimatländer zurück. Vor allem Türkeistämmige blieben nach dem Anwerbestopp häufiger in Deutschland als die Arbeitskräfte aus anderen Ländern. Wie keine andere Stadt steht Berlin bis heute für die Einwanderung aus der Türkei. Stefan Zeppenfeld untersucht den Wandel der türkischen Arbeitswelten von ihren Anfängen in den 1960er Jahren bis zur Wiedervereinigung. Ausgehend von der »Gastarbeit« im industriellen Großbetrieb spürt er in seiner Studie am Beispiel West-Berlins dem Übergang in andere Branchen nach. Er zeigt, wie der öffentliche Dienst auch für Migrantinnen und Migranten attraktive Aufstiegsmöglichkeiten eröffnete, zeichnet den schwierigen Weg in die gewerbliche Selbstständigkeit nach und legt illegale Beschäftigungsformen als alternative Verdienstmöglichkeit offen. Damit bettet der Autor die Geschichte der türkischen Arbeitsmigration in die deutsche Zeitgeschichte ein. Y1 - 2021 SN - 978-3-8353-5022-9 IS - 26 PB - Wallstein-Verlag CY - Göttingen ER - TY - THES A1 - Ruch, Joël T1 - Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations T1 - Vulkan Deformationsanalyse im Bereich Lazufre (Zentral-Anden) mit geodätischen und geologischen Beobachtungen N2 - Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring. N2 - Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation des Vulkans und vulkanischen Strukturen innerhalb der betroffenen Gegend. Wir folgern daraus, dass diese Beobachtungen der Ausdruck eines langlebigen, magmatischen Systems in der Tiefe an der Oberfläche sind. Es ist noch nicht klar, ob Lazufre größere vulkanische Unruhen, wie zum Beispiel Eruptionen auslösen könnte, aber die Deformation am Vulkan Lastarria und ein Anstieg der großräumigen Deformationsrate, machen diese Region interessant für eine zukünftige, kontinuierliche Überwachung. KW - Vulkan Verformung KW - InSAR KW - zentralen Anden KW - Spannungsfeld KW - volcano deformation KW - InSAR KW - central Andes KW - stress field Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-47361 ER - TY - THES A1 - Senger, Toralf T1 - Untersuchungen zur Metallhomöostase in Arabidopsis thaliana T1 - Investigations to study metal homeostasis in Arabidopsis thaliana N2 - Alle Organismen sind für ihr Überleben auf Metalle angewiesen. Hierbei gibt es für jedes Metall einen Konzentrationsbereich, der das Optimum zwischen Metallmangel, -bedarf und -toxizität darstellt. Es gilt mittlerweile als erwiesen, dass alle Organismen zur Aufrechterhaltung des Metallgleichgewichts ein komplexes Netzwerk von Proteinen und niedermolekularen Verbindungen entwickelt haben. Die molekularen Komponenten dieses Netzwerks sind nur zu einem Teil bekannt und charakterisiert: In den letzten Jahren wurden einige Proteinfamilien identifiziert, deren Mitglieder Metalle durch Lipidmembranen transportieren. Eine dieser Metalltransporterfamilien ist die Cation Diffusion Facilitator (CDF)-Familie: Alle charakterisierten Mitglieder exportieren Metalle aus dem Zytoplasma – entweder in zelluläre Kompartimente oder aus der Zelle heraus. Von den zwölf Mitgliedern dieser Familie in Arabidopsis thaliana (A. thaliana) – Metall Toleranz Protein (MTP)-1 bis -12 – wurden bisher AtMTP1 und AtMTP3 charakterisiert. In dieser Arbeit wird die Charakterisierung von AtMTP2 beschrieben. Wie die homologen Proteine AtMTP1 und AtMTP3 führt AtMTP2 zu Zn-Toleranz, wenn es heterolog in Zn-sensitiven Hefemutanten exprimiert wird. Mit AtMTP2 transformierte Hefemutanten zeigten darüber hinaus erhöhte Co-Toleranz. Expression von chimären AtMTP2/GFP Fusionsproteinen in Hefe, A.thaliana protoplasten und in stabil transformierten A.thalinana Planzenlinien deutet auf Lokalisation of AtMTP2 in Membranen des Endoplasmatischen Retikulums (ER) hin, wenn GFP an den C-Terminus von MTP2 fusioniert wird. Fusion of GFP an den N-Terminus von AtMTP2 führte zu Lokalisation in der vakuolären Membran, was wahrscheinlichsten auf Fehllokalisierung durch Maskierung eines ER-Retentionsmotivs (XXRR) am N-Terminus von AtMTP2 zurückgeht. Dies legt nahe, dass AtMTP2 die erwähnten Metalle in das Endomembransystem der Zelle transportieren kann. Eine gewebespezifische Lokalisierung wurde mit Pflanzen durchgeführt, die das β-Glucuronidase (GUS)-Reporterprotein bzw. chimäre Fusionsproteine aus EGFP und AtMTP2 unter Kontrolle des nativen pMTP2-Promotors exprimierten. Diese Experimente bestätigten zum einen, dass der pMTP2-Promotor nur unter Zn-Defizienz aktiv ist. GUS-Aktivität wurde unter diesen Bedingungen in zwei Zonen der Wurzelspitze beobachtet: in den isodiametrischen Zellen der meristematischen Zone und in der beginnenden Wurzelhaarzone. Darüber hinaus konnte gezeigt werden, dass die EGFP-Fusionsproteine unter Kontrolle des nativen pMTP2-Promotors nur in epidermalen Zellen exprimiert werden. Für eine homozygote Knockout- Linie, mtp2-S3, konnte bisher kein eindeutiger Phänotyp identifiziert werden. Auf Grundlage der bisher durchgeführten Charakterisierung von AtMTP2 erscheinen zwei Modelle der Funktion von AtMTP2 in der Pflanze möglich: AtMTP2 könnte essentiell für die Versorgung des ER mit Zn unter Zn-Mangelbedingungen sein. Hierfür spricht, dass AtMTP2 in jungen, teilungsaktiven und damit Zn-benötigenden Wurzelzonen exprimiert wird. Die auf die Epidermis beschränkte Lokalisation könnte bei diesem Modell auf die Möglichkeit der zwischenzellulären Zn-Verteilung innerhalb des ER über Desmotubules hindeuten. Alternativ könnte AtMTP2 eine Funktion bei der Detoxifizierung von Zn unter Zn-Schock Bedingungen haben: Es ist bekannt, dass unter Zn- Mangelbedingungen die Expression der zellulären Zn-Aufnahmesysteme hochreguliert wird. Wenn nun die Zn-Verfügbarkeit im Boden z. B durch eine pH-Änderung innerhalb kurzer Zeit stark ansteigt, besteht die Notwendigkeit der Entgiftung von Zn innerhalb der Zelle, bis der starke Einstrom von Zn ins Zytoplasma durch die Deaktivierung der Zn-Aufnahmesysteme und einer geringeren Expression in der Pflanze gedrosselt ist. Ein ähnlicher Mechanismus wurde in der Bäckerhefe S. cerevisae beschrieben, in der darüber hinaus ein Zn-Transporter verstärkt exprimiert wird, der Zn durch Transport in die Vakuole entgiften kann. Es ist durchaus möglich, dass in Arabidopsis AtMTP2 die Zn-Detoxifizierung unter diesen speziellen Bedingungen durch Zn-Transport in das ER oder die Vakuole vermittelt. Zur Identifikation weiterer Komponenten des Metallhomöostasenetzwerks sind verschiedene Ansätze denkbar. In dieser Arbeit wurde in Hefe ein heterologer Screen durchgeführt, um Interaktoren für vier Mitglieder der Arabidopsis-CDF-Familie zu identifizieren. Unter den 11 im Hefesystem bestätigten Kandidaten befindet sich mit AtSPL1 ein AtMTP1-Interaktionskandidat, der möglicherweise eine Rolle bei der Cu-,Zn-Homöostase spielt. Als wahrscheinliche AtMTP3-Interaktionskandidaten wurde die c”-Untereinheit der vakuolären H+-ATPase AtVHA identifiziert sowie mit AtNPSN13 ein Protein, das vermutlich eine Rolle bei Fusionen von Vesikeln mit Zielmembranen spielt. Ein anderer Ansatz zur Identifikation neuer Metallhomöostasegene ist die vergleichende Elementanalyse von natürlichen oder mutagenisierten Pflanzenpopulationen. Voraussetzung für diesen Ansatz ist die schnelle und genaue Analyse des Elementgehalts von Pflanzen. Eine etablierte Methode zur simultanen Bestimmung von bis zu 65 Elementen in einer Probe ist die Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). Der limitierende Faktor für einen hohen Probendurchsatz ist die Notwendigkeit, Proben für die Analyse zu verflüssigen. Eine alternative Methode der Probenzuführung zum Analysegerät ist die elektrothermale Verdampfung (ETV) der Probe. Zur weitgehend automatisierten Analyse von Pflanzenmaterial mit minimiertem Arbeitsaufwand wurde eine Methode entwickelt, die auf der Kopplung der ETV mit der ICP OES basiert. N2 - All organisms require for their survival essential metals. For each required metal exists an optimal concentration between metal deficiency and -toxicity. It has become evident that all organisms developed a complex network of proteins and low molecular compounds to maintain the equilibrium between all metals. Only few molecular components of this metal-homeostasis network are characterized in detail: A number of protein families whose members transport metals over the barrier of lipid-membranes have been identified during the last couple of years. One of those metal-transport families is the Cation Diffusion Facilitator (CDF) family. All characterized members export metals from the cytoplasm – either into cellular compartments or outside the cell. From the 12 Arabidopsis thaliana (A.thaliana) members – Metal Tolerance Protein (MTP)-1 to 1-2 – only MTP1 and MTP3 have been characterized yet. In this work, characterization of MTP2 is described. As was found for the homologous proteins AtMTP1 and AtMTP3, heterologous expression of AtMTP2 in Zn-sensitive yeast mutants leads to enhanced Zn-tolerance. Less pronounced, enhanced tolerance was also found for Co when AtMTP2 was expressed in Co sensitive yeast mutants. Expression of chimeric AtMTP2/GFP fusion proteins in yeast, A.thaliana protoplasts and in stably transformed A.thalinana plant lines indicated localization of MTP2 in membranes of the endoplasmic reticulum, when GFP was fused to the C-terminal end of MTP2. Fusion of GFP to the N-terminal end of MTP2 lead to vacuolar localization that is most likely explained as mistargeting due to masking of an ER retrieval motive (XXRR) found at the N-terminus of MTP2. This suggests that AtMTP2 mediates the transport of Zn and Co into the endomembrane system of the cell. Tissue specific localization was performed with plant lines expressing the β-Glucuronidase (GUS) reporter protein and with plant lines expressing chimeric fusions of GFP with AtMTP2 under control of the native pMTP2 promoter. Those experiments confirmed Affymetrix Genechip® data suggesting activity of the pMTP2 promoter only under Zn-deficiency. GUS activity was only found under Zn-deficiency in two zone of root tips – the meristematic zone, characterized by isodiamtric cells, and in the beginning differentiation zone, characterized by appearing root hairs. Confocal microscopy with plant lines expressing chimeric MTP2 /GFP fusions demonstrated that expression of AtMTP2 is restricted to epidermal cells. A phenotype for the homozygous mtp2-S3 knockout mutant could not be identified yet. Based on the data obtained as yet , two mode of action of AtMTP2 in planta seam likely: AtMTP2 could be essential for delivery of Zn to the ER under Zn-deficiency. This is supported by the fact, that AtMTP2 is active in young, dividing (and therefore Zn-requiring) zones of the root. The epidermal-restricted expression of AtMTP2 points towards a distribution of Zn in these root zones of Zn within desmotubules. Alternatively, AtMTP2 could have a Zn-detoxifying function under Zn-shock. It is known that in yeast under Zn-deficiency not only the expression of an Zn-uptake transporter is up-regulated, but also the expression of a vacuolar Zn-transporter. It mediates Zn-detoxification of surplus Zn that enters cells upon Zn-resupply before shut down of the Zn uptake system. AtMTP2 could exert this function when soil Zn-availability raises suddenly, for example due to rain after a drought. Different means/methods are perceivable to identify further components of the metal homeostasis network. In this work, a heterologuos screen was performed in yeast to identify interacting proteins for four members of the Arabidopsis CDF-family. Among 11 candidates identified and confirmed in the Split Ubiquitin System (SUS, a Yeast-2-Hybrid variant) is with AtSPL1 an AtMTP1 interaction candidate, which plays putatively a role in Zn,Cu homoestasis. The c” subunit of the vacuolar H+-ATPase AtVHA was found as likely AtMTP3-interaction candidate, as well as AtNPSN13, an protein that plays putatively a role in fusion of vesicles with target-membranes. Another method to identify new metal homeostasis genes is the comparative elemental analysis of natural and mutagenized plant populations. Prerequisite for this approach is the fast and accurate analysis of the elemental composition of plants. An established method for elemental analysis is Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). The limiting factor for high thoughput is the requirement for laborious wet digest of plant samples before analysis. An alternative mean of sample delivery to the ICP OES is electrothermal vaporization (ETV). For faster, less laborious analysis of plant material, a method based on the established coupling of ETV with ICP OES was developed, which is optimized for plant material and automated as far as possible. KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interaktoren KW - Split Ubiquitin KW - ETV KW - ICP OES KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interactors KW - Split Ubiquitin KW - ETV KW - ICP OES Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13234 ER - TY - THES A1 - Drobyshev, Evgenii T1 - Toxic or beneficial? What is the role of food-relevant selenium species selenoneine? T1 - Giftig oder nützlich? Welche Rolle spielt die lebensmittelrelevante Selenspezies Selenonein? N2 - Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present. The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine. Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells. In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter – OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation. As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation. Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant. N2 - Selen (Se) ist ein essentielles Spurenelement, das in geringen Konzentrationen ubiquitär in der Umwelt vorkommt. Essentielle Funktionen von Se im menschlichen Körper manifestieren sich in einer Vielzahl von Proteinen, die Selenocystein als aktives Zentrum enthalten. Solche Proteine werden Selenoproteine genannt, die in zahlreichen physiologischen Prozessen wie der antioxidativen Abwehr und der Regulierung der Schilddrüsenhormonfunktionen vorkommen. Daher ist bekannt, dass ein Se-Mangel ein breites Spektrum physiologischer Beeinträchtigungen verursacht, insbesondere in solchen Regionen mit niedrigem Se-Bodengahlten. Dennoch kann Se als essentielles Spurenelement auch toxische Wirkungen entfalten, wenn seine Aufnahme das tolerierbare Maß überschreitet. Dementsprechend stellt dieser Bereich zwischen Mangel und Überbelichtung eine optimale Se-Versorgung dar. Dieser Bereich erwies sich jedoch als enger als bei jedem anderen essentiellen Spurenelement. Zusammen mit stark schwankenden SeKonzentrationen im Boden und dem Vorliegen spezifischer Bioakkumulationsfaktoren stellt dies eine deutliche Schwierigkeit bei der Beurteilung des epidemiologischen Selenstatus dar. Während im Körper mehrere Selenoproteine vorliegen, erfolgt seine Aufnahme hauptsächlich in Form kleiner organischer oder anorganischer Moleküle. Somit hängt die Se-Exposition nicht nur von der täglichen Aufnahme ab, sondern auch von der jeweiligen chemischen Form, in der es vorliegt. Die essentiellen Funktionen von Selen sind seit langem bekannt und seine Primärformen in verschiedenen Nahrungsquellen dominierenden Formen wurden bereits gut beschrieben. Dennoch wurden erst in den letzten Jahrzehnten neue analytische Möglichkeiten für eine umfassendere Untersuchung von Se-Spezies und ihren Derivaten entwickelt. Beispielsweise wurde 2010 eine neue Se-Verbindung im Blut und im Gewebe von Rotem Thunfisch identifiziert. Es wurde Selenonein (SeN) genannt, da es ein Isolog des natürlich vorkommenden Antioxidans Ergothionein (ET) ist, bei dem Se durch Schwefel ersetzt ist. In den folgenden Jahren wurde SeN in einer Reihe von essbaren Fischarten identifiziert und erregte einerseits als neue Nahrungsquelle für Se und andererseits als potenziell starkes Antioxidans Aufmerksamkeit. Studien an Probanden, deren Ernährung hauptsächlich von Fisch geprägt ist, haben gezeigt, dass SeN den hauptsächlichen nicht-proteingebundenen Se-Pool in ihrem Blut darstellt. Erste Studien mit angereicherten Fischextrakten zeigten bereits das hohe antioxidative Potenzial von SeN und seine mögliche Funktion bei der Entgiftung von Methylquecksilber im Fisch. Zellkulturstudien zeigten, dass SeN den gleichen Transporter wie Ergothionein nutzen kann und ein weiterer SeN-Metabolit wurde im menschlichen Urin gefunden. Bis vor kurzem waren Studien zu den Eigenschaften von SeN aufgrund fehlender Möglichkeiten, die reine Verbindung zu erwerben, stark eingeschränkt. Als wichtige Grundlage für die vorliegende Arbeit diente zunächst die erfolgreiche Synthese des SeN, welche an der Universität Graz unter Verwendung gentechnisch veränderter Hefen erfolgte. In der aktuellen Studie wurde unter Verwendung von HepG2-Leberkarzinomzellen gezeigt, dass SeN in physiologisch relevanten Konzentrationen keine toxischen Effekte in diesen Hepatozyten induziert. Bioverfügbarkeitsexperimente zeigten, dass SeN für die verwendeten Leberzellen nicht bioverfügbar ist. Im nächsten Teil wurde ein Modell der Blut-Hirn-Schranke (BHS) verwendet, das auf kapillaren Endothelzellen aus dem Schweinehirn basiert, um den möglichen Transfer von SeN in das zentrale Nervensystem (ZNS) zu untersuchen. Die Bewertung von Toxizitätsmarkern in diesen Endothelzellen und die online Überwachung der Barriere-Bedingungen während der Transferexperimente zeigten, dass bei physiologisch relevanten Konzentrationen keine toxischen Wirkungen von SeN auf das BHS-Endothel auftreten. Daten bezüglich des Übergangs der Selenspezies SeN zeigten zwar eine langsame, jedoch eine nicht zu vernachlässigenden Menge, die die Barriere passieren kann. Die gleichzeitige Inkubation von SeN auf beiden Barriere-Seiten verursachte keinen seitenspezifischen Transfer von SeN, was auf einen passiven Diffusionsmechanismus von SeN über die BHS hindeutet. Diese Daten stimmen mit Tierstudien überein, in denen eine ET-Akkumulation im Rattengehirn beobachtet wurde, obwohl die BHS der Ratte nicht über den primären ET-Transporter – OCTN1 – verfügt. Die Untersuchung von Monolayern aus kapillaren Endothelzellen nach Inkubation mit SeN und Referenzselenverbindungen zeigte keinen signifikanten Anstieg der intrazellulären Selenkonzentration. Speziesspezifische Se-Messungen in Mediumproben aus den apikalen und basolateralen Kompartimenten, sowie in den Zelllysaten zeigten keine SeN-Metabolisierung. Daraus kann geschlossen werden, dass SeN das Gehirn ohne signifikante Transformation erreichen kann. Als dritter Teil dieser Arbeit wurde die Bewertung der antioxidativen Eigenschaften von SeN in menschlichen Caco-2, also kolorektale Adenokarzinomzellen, durchgeführt. Frühere Studien zeigten, dass das Darmepithel in der Lage ist, SeN aktiv vom Darmlumen zur Blutseite zu transportieren und dort SeN anzureichern. Weitere Untersuchungen im Rahmen der aktuellen Arbeiten zeigten ein viel höheres antioxidatives Potenzial von SeN im Vergleich zu ET. Die Aktivität als Radikalfänger nach Inkubation mit SeN war ähnlich wie bei Selenit und Selenomethionin. Wobei die Wirkung von SeN auf die Lebensfähigkeit von Darmzellen unter oxidativen Bedingungen jedoch ähnlich der durch ET verursachten war. Um die Frage zu beantworten, ob SeN als diätetische Se-Quelle verwendet werden kann um die Aktivität von Selenoproteinen zu induzieren, wurden zusätzlich die Aktivität der Glutathionperoxidase (GPx) und die Sekretion von Selenoprotein P (SelenoP) in Caco-2-Zellen gemessen. Wie erwartet, bewirkten die Referenz-Selenverbindungen Selenit und Selenomethionin eine effiziente Induktion der GPx-Aktivität, im Gegensatz zu diesen hatte SeN keinen Einfluss auf die GPx-Aktivität. Um die Möglichkeit einer Einbettung von SeN in das Selenoproteom zu untersuchen, wurde SelenoP im Kulturmedium gemessen. Obwohl Caco-2-Zellen SeN effektiv in viel höherenMengen als Selenit oder Selenomethionin aufnehmen, wurde nach der SeN-Inkubation keine Sekretion von SelenoP beobachtet. Zusammenfassend können wir schlussfolgern, dass SeN kaum als Se-Quelle für die Selenoproteinsynthese dienen kann. SeN weist jedoch starke antioxidative Eigenschaften auf, die auftreten, wenn Schwefel in ET durch Se ausgetauscht wird. Daher ist SeN von besonderem Interesse für die Forschung, nicht als Teil des Se-Stoffwechsels, sondern als wichtiges endemisches diätetisches Antioxidans. KW - selenium KW - selenoneine KW - HepG2 KW - Caco-2 KW - PBCEC KW - Caco-2 KW - HepG2 KW - PBCEC KW - Selen KW - Selenonein Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573794 ER - TY - THES A1 - Lenz, Josefine T1 - Thermokarst dynamics in central-eastern Beringia T1 - Thermokarstdynamik im zentral-östlichen Beringia BT - insights from permafrost and lacustrine sediment cores BT - Einblicke durch Permafrost- und Seesedimentkerne N2 - Widespread landscape changes are presently observed in the Arctic and are most likely to accelerate in the future, in particular in permafrost regions which are sensitive to climate warming. To assess current and future developments, it is crucial to understand past environmental dynamics in these landscapes. Causes and interactions of environmental variability can hardly be resolved by instrumental records covering modern time scales. However, long-term environmental variability is recorded in paleoenvironmental archives. Lake sediments are important archives that allow reconstruction of local limnogeological processes as well as past environmental changes driven directly or indirectly by climate dynamics. This study aims at reconstructing Late Quaternary permafrost and thermokarst dynamics in central-eastern Beringia, the terrestrial land mass connecting Eurasia and North America during glacial sea-level low stands. In order to investigate development, processes and influence of thermokarst dynamics, several sediment cores from extant lakes and drained lake basins were analyzed to answer the following research questions: 1. When did permafrost degradation and thermokarst lake development take place and what were enhancing and inhibiting environmental factors? 2. What are the dominant processes during thermokarst lake development and how are they reflected in proxy records? 3. How did, and still do, thermokarst dynamics contribute to the inventory and properties of organic matter in sediments and the carbon cycle? Methods applied in this study are based upon a multi-proxy approach combining sedimentological, geochemical, geochronological, and micropaleontological analyses, as well as analyses of stable isotopes and hydrochemistry of pore-water and ice. Modern field observations of water quality and basin morphometrics complete the environmental investigations. The investigated sediment cores reveal permafrost degradation and thermokarst dynamics on different time scales. The analysis of a sediment core from GG basin on the northern Seward Peninsula (Alaska) shows prevalent terrestrial accumulation of yedoma throughout the Early to Mid Wisconsin with intermediate wet conditions at around 44.5 to 41.5 ka BP. This first wetland development was terminated by the accumulation of a 1-meter-thick airfall tephra most likely originating from the South Killeak Maar eruption at 42 ka BP. A depositional hiatus between 22.5 and 0.23 ka BP may indicate thermokarst lake formation in the surrounding of the site which forms a yedoma upland till today. The thermokarst lake forming GG basin initiated 230 ± 30 cal a BP and drained in Spring 2005 AD. Four years after drainage the lake talik was still unfrozen below 268 cm depth. A permafrost core from Mama Rhonda basin on the northern Seward Peninsula preserved a full lacustrine record including several lake phases. The first lake generation developed at 11.8 cal ka BP during the Lateglacial-Early Holocene transition; its old basin (Grandma Rhonda) is still partially preserved at the southern margin of the study basin. Around 9.0 cal ka BP a shallow and more dynamic thermokarst lake developed with actively eroding shorelines and potentially intermediate shallow water or wetland phases (Mama Rhonda). Mama Rhonda lake drainage at 1.1 cal ka BP was followed by gradual accumulation of terrestrial peat and top-down refreezing of the lake talik. A significant lower organic carbon content was measured in Grandma Rhonda deposits (mean TOC of 2.5 wt%) than in Mama Rhonda deposits (mean TOC of 7.9 wt%) highlighting the impact of thermokarst dynamics on biogeochemical cycling in different lake generations by thawing and mobilization of organic carbon into the lake system. Proximal and distal sediment cores from Peatball Lake on the Arctic Coastal Plain of Alaska revealed young thermokarst dynamics since about 1,400 years along a depositional gradient based on reconstructions from shoreline expansion rates and absolute dating results. After its initiation as a remnant pond of a previous drained lake basin, a rapidly deepening lake with increasing oxygenation of the water column is evident from laminated sediments, and higher Fe/Ti and Fe/S ratios in the sediment. The sediment record archived characterizing shifts in depositional regimes and sediment sources from upland deposits and re-deposited sediments from drained thaw lake basins depending on the gradually changing shoreline configuration. These changes are evident from alternating organic inputs into the lake system which highlights the potential for thermokarst lakes to recycle old carbon from degrading permafrost deposits of its catchment. The lake sediment record from Herschel Island in the Yukon (Canada) covers the full Holocene period. After its initiation as a thermokarst lake at 11.7 cal ka BP and intense thermokarst activity until 10.0 cal ka BP, the steady sedimentation was interrupted by a depositional hiatus at 1.6 cal ka BP which likely resulted from lake drainage or allochthonous slumping due to collapsing shore lines. The specific setting of the lake on a push moraine composed of marine deposits is reflected in the sedimentary record. Freshening of the maturing lake is indicated by decreasing electrical conductivity in pore-water. Alternation of marine to freshwater ostracods and foraminifera confirms decreasing salinity as well but also reflects episodical re-deposition of allochthonous marine sediments. Based on permafrost and lacustrine sediment records, this thesis shows examples of the Late Quaternary evolution of typical Arctic permafrost landscapes in central-eastern Beringia and the complex interaction of local disturbance processes, regional environmental dynamics and global climate patterns. This study confirms that thermokarst lakes are important agents of organic matter recycling in complex and continuously changing landscapes. N2 - Derzeit werden deutliche Landschaftsveränderungen in der Arktis beobachtet, welche sich höchstwahrscheinlich zukünftig v.a. in den Permafrostregionen verstärken, da diese besonders empfindlich auf Klimaveränderungen reagieren. Um derzeitige und zukünftige Entwicklungen einschätzen zu können, ist es wichtig vergangene Umweltprozesse zu verstehen. Ursachen und Wechselwirkungen von Umweltveränderungen können nur bedingt durch instrumentelle Aufzeichnungen erklärt werden, doch Paleo-Umweltarchive können weit in die Vergangenheit reichende Umweltdynamiken aufzeichnen. Seesedimente sind wichtige Archive, die lokale limnogeologische Prozesse, aber auch direkt oder indirekt klimatisch gesteuerte Umweltveränderungen der Vergangenheit aufzeichnen. Ziel der vorliegenden Arbeit ist es, spätquartäre Permafrost- und Thermokarstdynamik im zentral-östlichen Beringia zu rekonstruieren. Beringia umfasst jene terrestrische Landmasse, welche Eurasien und Nord-Amerika zu Zeiten von Meeresspiegeltiefständen verband. Um die Entwicklung, die Prozesse und den Einfluss von Thermokarstdynamik zu untersuchen, wurden mehrere Sedimentkerne von rezenten Seen und ausgelaufenen Seebecken analysiert, um folgende Forschungsfragen zu beantworten: 1. Zu welcher Zeit degradierte Permafrost und wann entwickelten sich Thermokarstseen? Was waren hemmende oder verstärkende Faktoren? 2. Was sind dominierende Prozesse während der Entwicklung von Thermokarstseen und wie spiegeln sich diese in Proxy-Aufzeichnungen wieder? 3. Wie hat Thermokarstdynamik damals und heute zur Bedeutung von organischer Substanz in Sedimenten und im Kohlenstoffkreislauf beigetragen? Die in dieser Arbeit angewandten Methoden basieren auf einem sogenannten „multi-proxy“ Ansatz, der sedimentologische, geochemische, geochronologische und mikropaläontologische Analysen, sowie die Untersuchung von stabilen Isotopen und die Hydrochemie von Porenwasser und -eis, verbindet. Feldmessungen der modernen Wasserqualität und Beckenmorphometrie komplettieren die Umweltuntersuchungen. Auf Grundlage der untersuchten Sedimentkerne lässt sich die Degradation von Permafrost und die Dynamik von Thermokarst auf zeitlich verschiedenen Skalen rekonstruieren. Die Analyse eines Sedimentkerns vom GG-Becken auf der nördlichen Seward-Halbinsel (Alaska) zeigt eine vorwiegend terrestrische Akkumulation von Yedoma während des Früh- und Mittel-Wisconsin mit zwischenzeitlich feuchteren Verhältnissen zwischen 44,5 und 41,5 ka BP. Diese frühe Feuchtgebietsphase wurde durch die Akkumulation einer 1 m dicken Tephra-Lage beendet, welche sehr wahrscheinlich von der Eruption des heutigen South Killeak Maar vor etwa 42.000 Jahren stammt. Eine Schichtlücke im Sedimentkern von etwa 22,5 und 0,23 ka BP gibt einen Hinweis auf Thermokarstentwicklung in der Umgebung der Kernlokation, welche bis heute ein Yedoma-Rudiment bildet. Der Thermokarstsee, der GG-Becken formte, entstand 230 ± 30 cal a BP und drainierte im Frühling 2005 AD. Vier Jahre nach der Drainage war der Talik des Sees in einer Tiefe von 268 cm noch ungefroren. Ein Permafrostkern vom Mama Rhonda-Becken auf der nördlichen Seward-Halbinsel archivierte eine vollständige limnische Fazies mit mehreren Seephasen. Die erste Seegeneration entstand am Übergang vom Spätglazial zum Frühholozän um etwa 11,8 cal ka BP; das alte Seebecken (Grandma Rhonda) ist bis heute südlich der Kernlokation erhalten. Etwa um 9,0 cal ka BP entwickelte sich ein eher flaches und dynamisches Seesystem mit aktiv erodierenden Ufern und potenziell zwischengeschalteten Flachwasser- oder Feuchtgebietsphasen (Mama Rhonda). Die Drainage vom Mama Rhonda-See etwa 1,1 cal ka BP wurde gefolgt von gradueller Torfakkumulation und einem von oben zurückfrierenden See-Talik Es wurde ein deutlich geringerer organischer Kohlenstoff-Gehalt in Grandma Rhonda-Ablagerungen (TOC im Mittel 2,5 Gew.-%) festgestellt, als in Mama Rhonda Ablagerungen (TOC im Mittel 7,9 Gew.-%). Dies zeigt den bedeutenden Einfluss von Thermokarst auf biogeochemische Kreisläufe, da in verschiedenen Seegenerationen organischen Kohlenstoff durch Permafrost-Tauen im Seesystem mobilisiert wird. Seesedimentkerne aus der Uferzone und dem zentralen Bereich von Peatball Lake auf der Arktischen Küstenebene von Alaska, ergaben eine junge Thermokarstdynamik von 1.400 Jahren, welche auf der Basis von absoluten Datierungen und Uferexpansionsraten rekonstruiert wurde. Nach der Seeinitiierung als Rest-See eines zuvor ausgelaufenen Seebeckens, vertiefte sich Peatball Lake verhältnismäßig schnell mit zunehmender Sauerstoffanreicherung der Wassersäule, wie aus laminierten Sedimenten und hohen Fe/Ti- und Fe/S-Verhältnissen im Sediment ersichtlich ist. Die Sedimente von Peatball Lake archivierten einen Wechsel des Ablagerungsregimes bei Ausdehnung der Seefläche und einen Wechsel der Sedimentquelle von ursprünglichen, rein terrestrischen Ablagerungen und bereits umgelagerten Sedimenten aus drainierten Seebecken. Angezeigt wird dieser Wechsel durch eine Veränderung im Eintrag organischen Materials in das Seesystem, was wiederum das Potential von Thermokarstseen bei der Aufarbeitung alten Kohlenstoffs aus degradierendem Permafrost im Einzugsgebiet verdeutlicht. Der Seesedimentkern von der Herschel Insel im Yukon (Kanada) deckt das gesamte Holozän ab. Nach der Seeentstehung um 11,7 cal ka BP und einer Zeit intensiver Thermokarstaktivität bis 11,0 cal ka BP, wird die Phase einer eher kontinuierlichen Sedimentation von einer Schichtlücke um 1,6 cal ka BP unterbrochen. Diese wurde entweder durch die Drainage des Sees oder einer allochthonen Rutschung instabiler Uferlinien verursacht. Die spezielle Situation des Sees auf einer Stauchendmoräne aus marinem Material spiegelt sich auch in dem Seesedimentarchiv wieder. Das Aussüßen des wachsenden Sees wird durch die abnehmende elektrische Leitfähigkeit im Porenwasser angezeigt. Der Wechsel von marinen und Süßwasserostrakoden- und Foraminiferengemeinschaften bestätigt zum einen die abnehmende Salinität des Sees, aber zeigt zum anderen auch episodische Umlagerung von allochthonem, marinem Sediment. Auf der Grundlange von Permafrost- und Seesedimentkernen zeigt diese Arbeit Beispiele spätquartärer Entwicklungsgeschichte typischer Arktischer Permafrostlandschaften im zentral-östlichen Beringia. Es werden komplexe Zusammenhänge zwischen lokalen Störungsprozessen, regionaler Umweltdynamik und globalen Klimaveränderungen aufgezeigt. Thermokarstseen spielen dabei eine wichtige Rolle im sich kontinuierlich verändernden Landschaftsbild der hohen Breiten und im Stoffkreislauf bei der Aufarbeitung organischer Substanz. KW - paleolimnology KW - permafrost degradation KW - periglacial landscape evolution KW - thermokarst processes KW - carbon cycling KW - central-eastern Beringia KW - Paläolimnologie KW - Permafrostdegradation KW - periglaziale Landschaftsentwicklung KW - Thermokarstprozesse KW - Kohlenstoffkreislauf KW - zentral-östliches Beringia Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101364 ER - TY - THES A1 - Morgenstern, Anne T1 - Thermokarst and thermal erosion : degradation of Siberian ice-rich permafrost T1 - Thermokarst und Thermoerosion : Degradation von sibirischem eisreichem Permafrost N2 - Current climate warming is affecting arctic regions at a faster rate than the rest of the world. This has profound effects on permafrost that underlies most of the arctic land area. Permafrost thawing can lead to the liberation of considerable amounts of greenhouse gases as well as to significant changes in the geomorphology, hydrology, and ecology of the corresponding landscapes, which may in turn act as a positive feedback to the climate system. Vast areas of the east Siberian lowlands, which are underlain by permafrost of the Yedoma-type Ice Complex, are particularly sensitive to climate warming because of the high ice content of these permafrost deposits. Thermokarst and thermal erosion are two major types of permafrost degradation in periglacial landscapes. The associated landforms are prominent indicators of climate-induced environmental variations on the regional scale. Thermokarst lakes and basins (alasses) as well as thermo-erosional valleys are widely distributed in the coastal lowlands adjacent to the Laptev Sea. This thesis investigates the spatial distribution and morphometric properties of these degradational features to reconstruct their evolutionary conditions during the Holocene and to deduce information on the potential impact of future permafrost degradation under the projected climate warming. The methodological approach is a combination of remote sensing, geoinformation, and field investigations, which integrates analyses on local to regional spatial scales. Thermokarst and thermal erosion have affected the study region to a great extent. In the Ice Complex area of the Lena River Delta, thermokarst basins cover a much larger area than do present thermokarst lakes on Yedoma uplands (20.0 and 2.2 %, respectively), which indicates that the conditions for large-area thermokarst development were more suitable in the past. This is supported by the reconstruction of the development of an individual alas in the Lena River Delta, which reveals a prolonged phase of high thermokarst activity since the Pleistocene/Holocene transition that created a large and deep basin. After the drainage of the primary thermokarst lake during the mid-Holocene, permafrost aggradation and degradation have occurred in parallel and in shorter alternating stages within the alas, resulting in a complex thermokarst landscape. Though more dynamic than during the first phase, late Holocene thermokarst activity in the alas was not capable of degrading large portions of Pleistocene Ice Complex deposits and substantially altering the Yedoma relief. Further thermokarst development in existing alasses is restricted to thin layers of Holocene ice-rich alas sediments, because the Ice Complex deposits underneath the large primary thermokarst lakes have thawed completely and the underlying deposits are ice-poor fluvial sands. Thermokarst processes on undisturbed Yedoma uplands have the highest impact on the alteration of Ice Complex deposits, but will be limited to smaller areal extents in the future because of the reduced availability of large undisturbed upland surfaces with poor drainage. On Kurungnakh Island in the central Lena River Delta, the area of Yedoma uplands available for future thermokarst development amounts to only 33.7 %. The increasing proximity of newly developing thermokarst lakes on Yedoma uplands to existing degradational features and other topographic lows decreases the possibility for thermokarst lakes to reach large sizes before drainage occurs. Drainage of thermokarst lakes due to thermal erosion is common in the study region, but thermo-erosional valleys also provide water to thermokarst lakes and alasses. Besides these direct hydrological interactions between thermokarst and thermal erosion on the local scale, an interdependence between both processes exists on the regional scale. A regional analysis of extensive networks of thermo-erosional valleys in three lowland regions of the Laptev Sea with a total study area of 5,800 km² found that these features are more common in areas with higher slopes and relief gradients, whereas thermokarst development is more pronounced in flat lowlands with lower relief gradients. The combined results of this thesis highlight the need for comprehensive analyses of both, thermokarst and thermal erosion, in order to assess past and future impacts and feedbacks of the degradation of ice-rich permafrost on hydrology and climate of a certain region. N2 - Die gegenwärtige Klimaerwärmung wirkt sich auf arktische Regionen stärker aus als auf andere Gebiete der Erde. Das hat weitreichende Konsequenzen für Permafrost, der weite Teile der terrestrischen Arktis unterlagert. Das Tauen von Permafrost kann zur Freisetzung erheblicher Mengen an Treibhausgasen sowie zu gravierenden Änderungen in der Geomorphologie, Hydrologie und Ökologie betroffener Landschaften führen, was wiederum als positive Rückkopplung auf das Klimasystem wirken kann. Ausgedehnte Gebiete der ostsibirischen Tiefländer, die mit Permafrost des Yedoma Eiskomplex unterlagert sind, gelten aufgrund des hohen Eisgehalts dieser Permafrostablagerungen als besonders empfindlich gegenüber Klimaerwärmungen. Thermokarst und Thermoerosion sind zwei Hauptformen der Permafrostdegradation in periglazialen Landschaften. Die zugehörigen Landschaftsformen sind auf der regionalen Skala bedeutende Indikatoren klimainduzierter Umweltvariationen. Thermokarstseen und senken (Alasse) sowie Thermoerosionstäler sind in den Küstentiefländern der Laptewsee weit verbreitet. Die vorliegende Dissertation untersucht die räumliche Verbreitung und die morphometrischen Eigenschaften dieser Degradationsformen mit dem Ziel, ihre Entwicklungsbedingungen während des Holozäns zu rekonstruieren und Hinweise auf potenzielle Auswirkungen zukünftiger Permafrostdegradation im Zuge der erwarteten Klimaerwärmung abzuleiten. Der methodische Ansatz ist eine Kombination aus Fernerkundungs-, Geoinformations- und Geländeuntersuchungen, die Analysen auf lokalen bis regionalen räumlichen Skalen integriert. Thermokarst und Thermoerosion haben die Untersuchungsregion tiefgreifend geprägt. Im Eiskomplexgebiet des Lena-Deltas nehmen Thermokarstsenken eine weitaus größere Fläche ein als Thermokarstseen auf Yedoma-Hochflächen (20,0 bzw. 2,2 %), was darauf hin deutet, dass die Bedingungen für die Entwicklung von großflächigem Thermokarst in der Vergangenheit wesentlich günstiger waren als heute. Die Rekonstruktion der Entwicklung eines einzelnen Alas im Lena-Delta belegt eine andauernde Phase hoher Thermokarstaktivität seit dem Übergang vom Pleistozän zum Holozän, die zur Entstehung einer großen und tiefen Senke führte. Nach der Drainage des primären Thermokarstsees im mittleren Holozän erfolgten Permafrostaggradation und degradation parallel und in kürzeren abwechselnden Etappen innerhalb des Alas und führten zu einer komplexen Thermokarstlandschaft. Trotzdem die spätholozäne Thermokarstentwicklung im Alas dynamischer ablief als die erste Entwicklungsphase, resultierte sie nicht in der Degradation großer Teile pleistozäner Eiskomplexablagerungen und einer wesentlichen Veränderung des Yedoma-Reliefs. Weitere Thermokarstentwicklung in bestehenden Alassen ist begrenzt auf geringmächtige Lagen holozäner eisreicher Alas-Sedimente, da die Eiskomplexablagerungen unter den großen primären Thermokarstseen vollständig getaut waren und die unterlagernden Sedimente aus eisarmen, fluvialen Sanden bestehen. Thermokarstprozesse auf ungestörten Yedoma-Hochflächen wirken am stärksten verändernd auf Eiskomplexablagerungen, werden aber in Zukunft auf geringere Ausmaße begrenzt sein, da die Verfügbarkeit großer ungestörter, schwach drainierter Yedoma-Hochflächen abnimmt. Auf der Insel Kurungnakh im zentralen Lena-Delta beträgt der für zukünftige Thermokarstentwicklung verfügbare Anteil an Yedoma-Hochflächen nur 33,7 %. Die zunehmende Nähe von sich entwickelnden Thermokarstseen auf Yedoma-Hochflächen zu bestehenden Degradationsstrukturen und anderen negativen Reliefformen verringert die Möglichkeit der Thermokarstseen, große Ausmaße zu erreichen bevor sie drainieren. Die Drainage von Thermokarstseen durch Thermoerosion ist in der Untersuchungsregion weit verbreitet, aber Thermoerosionstäler versorgen Thermokarstseen und –senken auch mit Wasser. Neben diesen direkten hydrologischen Wechselwirkungen zwischen Thermokarst und Thermoerosion auf der lokalen Ebene existiert auch eine Interdependenz zwischen beiden Prozessen auf der regionalen Ebene. Eine regionale Analyse weitreichender Netze von Thermoerosionstälern in drei Tieflandgebieten der Laptewsee mit einer Fläche von insgesamt 5800 km² zeigte, dass diese Formen häufiger in Gebieten mit höheren Geländeneigungen und Reliefgradienten auftreten, während Thermokarstentwicklung stärker in flachen Tiefländern mit geringeren Reliefgradienten ausgeprägt ist. Die kombinierten Ergebnisse dieser Dissertation zeigen die Notwendigkeit von umfassenden Analysen beider Prozesse und Landschaftsformen, Thermokarst und Thermoerosion, im Hinblick auf die Abschätzung vergangener und zukünftiger Auswirkungen der Degradation eisreichen Permafrosts auf Hydrologie und Klima der betrachteten Region und deren Rückkopplungen. KW - Fernerkundung KW - GIS KW - räumliche Analyse KW - periglaziale Landschaften KW - Arktis KW - remote sensing KW - GIS KW - spatial analyses KW - periglacial landscapes KW - Arctic Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62079 ER - TY - THES A1 - Meeßen, Christian T1 - The thermal and rheological state of the Northern Argentinian foreland basins T1 - Der thermische und rheologische Zustand der Nordargentinischen Vorlandbecken N2 - The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal décollement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes. Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina. The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the Río de la Plata craton, is expressed as a zone of low average crustal densities. In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends. Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses. Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the décollements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower décollement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift. This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina. N2 - Das Vorland der südamerikanischen Anden ist durch lateral variierende Deformationsregimes des östlichen Vorlands geprägt. Dabei treten zwei grundlegend verschiedene Endglieder mit charakteristischer Architektur auf: flach abgescherte Falten- und Überschiebungsgürtel einerseits und Vorland-Sockelüberschiebungen ("zerbrochenes Vorland") andererseits. Das morphologische Erscheinungsbild der Falten- und Überschiebungsgürtel entspricht lateral ausgedehnten, dicht aneinander gereihten Abfolgen von Hügeln und Tälern. Die Hügel werden durch eine darunter liegende Überschiebung definiert, die in einem subhorizontalen Abscherhorizont in 10 bis 20 km Tiefe endet. Sockelüberschiebungen hingegen sind in Gebieten mit geringer Sedimentmächtigkeit zu finden und sind durch weit auseinander liegende Erhebungen charakterisiert, welche von steil einfallenden, reaktivierten krustenskaligen Verwerfungen begrenzt werden. Als Ursachen der beobachteten Deformationsvariationen wurden präexistente Schwächezonen, Sedimentmächtigkeiten, Lithosphärenverdickung, Vulkanismus oder kompositionelle Eigenschaften aufgeführt. Diese Vorschläge waren überwiegend konzeptuell und meist auf Grundlage von Feldbeobachtungen oder synthetischen numerischen, thermo-mechanischen Modelle abgeleitet. Die vorliegende Dissertation beleuchtet zum ersten mal die Ursachen der beobachteten Deformationsstile aus der Perspektive von dreidimensionaler, Daten-integrativer Modellierung. Durch die Integration voneinander unabhängiger Daten erlaubt diese Art der Beschreibung des physikalischen Zustands der Lithosphäre die Erlangung zusätzliche Hinweise auf die zugrundeliegenden Ursachen der verschiedenen Derformationsregimes. Für eine solche Studie bietet sich Nord-Argentinien an, da dort beide Vorland-Endglieder vorzufinden sind. Die dafür im wesentlichen durchgeführten Arbeitsschritte beinhalten die Erstellung eines strukturellen Dichtemodells des Untersuchungsgebiets, die Berechnung des 3D stationären thermischen Feldes, sowie die Analyse der rheologischen Eigenschaften der Lithosphäre. Das datenbasierte strukturelle Dichtemodell ist mit verschiedenen geologischen und geophysikalischen Beobachtungen sowie dem Bouguer-Schwerefeld konsistent. Dieses Modell bildet die primären Dichtekontraste der oberen 200 km der Lithosphäre ab und differenziert Körper für die Sedimente, die kristalline Kruste, den lithosphärischen Mantel, und die subduzierende Nazca-Platte. Um die krusteninterne Dichteverteilung zu erhalten wurde ein automatisierter Inversionsprozess entworfen der es erlaubt eine leichtere Oberkruste und eine schwerere Unterkruste geometrisch zu definieren. Die Modellierung zeigt, dass die Kruste in Nord-Argentinien durch eine leichtere Oberkruste (2800 kg/m³) und eine dichtere Unterkruste (3100 kg/m³) repräsentiert werden kann. Das Transbrasilianische Linement, welches das Pampia Terran im Westen vom Río de La Plata Kraton im Osten trennt, ist durch eine im Vergleich zur Umgebung geringere durchschnittliche Krustendichte charakterisiert. In einem Exkurs wird anschließend demonstriert, dass die hier entwickelte Inversionsmethodik zur Ermittlung von intrakrustalen Dichtekontrasten auch im obersten lithosphärischen Mantel angewandt werden kann. Dichten zwischen der Kruste-Mantel-Grenze und etwa 50\,km Tiefe sind besonders schwer zu bestimmen, da tomographische Modelle die Geschwindigkeitsvariationen von seismischen Wellen in diesen Bereichen nicht auflösen. In Tan u.a. (2018) demonstrieren wir, dass die Inversionsmethode Dichteverläufe mit einer lateralen Ausdehnung von 125 km oder weniger ermitteln kann, und somit einen wichtigen Beitrag zur Bestimmung von subkrustalen Dichteverteilungen im Mantel liefert. Wegen der genetischen Verbindung zwischen Subduktion, Orogenese und Retroarc Vorlandbecken stellt sich die Frage, ob die Annahme eines stationären thermischen Feldes für solch ein dynamisches Modelliergebiet zulässig ist. Um diese Frage zu beantworten wurde zum einen der Einfluss von Subduktion auf das konduktive thermische Feld auf die kontinentale Lithosphäre untersucht. Zum anderen wurde die Abweichung zwischen transientem und stationären thermischen Feld eines gekoppelten geodynamischen Modells untersucht. Beide Untersuchungen weisen darauf hin, dass die Annahme eines stationären thermischen Felds für den Großteil des Modelliergebiets zulässig ist. Im orogenen Keil, in dem diese Annahme nicht gilt, wurde das transiente thermische Feld mithilfe der erfolgten Untersuchungen abgeschätzt. Entsprechend kann für das Arbeitsgebiet im Vorland das strukturelle Modell aus dem ersten Schritt zur Berechnung des stationären 3D konduktiven thermischen Feldes herangezogen werden. Basierend auf der ermittelten Dichte- und Temperatur-Konfigurationen konnte anschließend die rheologische Konfiguration berechnet werden. Die rheologischen Analysen zeigen, dass die Lithosphäre in Falten- und Überschiebungsgürteln nur eine gerine Festigkeit besitzt und die Kruste Großteil zur integrierten Festigkeit beiträgt. Das benachbarte Vorlandbecken jedoch weist eine vollständig gekoppelte und starke Lithosphäre auf, weshalb Krustenverkürzung nur im vergleichsweise schwachen orogenen Keil aufgenommen werden kann. Daher komme ich zu der Schlussfolgerung, dass die Abscherhorizonte der Falten- und Überschiebungsgürtel die oberflächennahe Fortsetzung von Scherzonen in der duktilen Kruste unterhalb des Orogens sind. Die Lokalisation der Transferzonen zwischen der duktilen Kruste und dem Abscherhorizont sind dabei maßgeblich durch präexistente Schwächezonen in der Kruste beeinflusst. Im zerbrochenen Vorland der Sierras Pampeanas ist die Lithosphäre vollständig gekoppelt und durch einen Mantel hoher Festigkeit charakterisiert. Die sehr hohe integrierte lithosphärische Festigkeit des zerbrochenen Vorlands verhindert die Bildung von Störungen durch tektonische Kräfte. Selbst krustenskalige Schwächezonen können die Festigkeit nicht ausreichend reduzieren, weshalb eine thermische Schwächung benötigt wird. Daher spielt der Magmatismus, der in direkter Nachbarschaft zu den Schwächezonen in der Sierras Pampeanas nachgewiesen wurde, eine Schlüsselrolle in der Entstehung des zerbrochenen Vorlands. Diese Hypothese erklärt die große räumliche Distanz zwischen den Vorlandsockelüberschiebungen, sowie die beobachtete zeitliche Verzögerung zwischen Magmatismus und Hebung der Gebirgskämme. Die vorliegende Studie kann somit aufgrund Daten-integrativer Modellierung einen kausalen Zusammenhang zwischen der Lithosphärenstruktur, den beobachteten Deformationsmechanismen und unabhängigen geologischen Beobachtungen herstellen. KW - Argentina KW - Rheology KW - Foreland basin KW - Foreland basins KW - Density modelling KW - Chaco-Paraná basin KW - Andes KW - Argentinien KW - Rheologie KW - Vorlandbecken KW - Dichtemodellierung KW - Chaco-Paraná Becken KW - Anden Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439945 ER - TY - THES A1 - Radloff, Katrin T1 - The role of the fatty acid profile and its modulation by cytokines in the systemic inflammation in cancer cachexia T1 - O papel e a modulação do perfil de ácidos graxos por citocinas na inflamação da caquexia associada ao câncer T1 - Die Rolle des Fettsäure-Profils und dessen entzündungsbedingten Veränderungen in der Tumorkachexie N2 - Systemic inflammation is a hallmark of cancer cachexia. Among tumor-host interactions, the white adipose tissue (WAT) is an important contributor to inflammation as it suffers morphological reorganization and lipolysis, releasing free fatty acids (FA), bioactive lipid mediators (LM) and pro-inflammatory cytokines, which accentuate the activation of pro-inflammatory signaling pathways and the recruitment of immune cells to the tissue. This project aimed to investigate which inflammatory factors are involved in the local adipose tissue inflammation and what is the influence of such factors upon enzymes involved in FA or LM metabolism in healthy individuals (Control), weight stable gastro-intestinal cancer patients (WSC) and cachectic cancer patients (CC). The results demonstrated that the inflammatory signature of systemic inflammation is different from local adipose tissue inflammation. The systemic inflammation of the cachectic cancer patients was characterized by higher levels of circulating saturated fatty acids (SFA), tumor-necrosis-factor-α (TNF-α), interleukins IL-6, IL-8 and CRP while levels of polyunsaturated fatty acids (PUFAs), especially n3-PUFAs, were lower in CC than in the other groups. In vitro and in adipose tissue explants, pro-inflammatory cytokines and SFAs were shown to increase the chemokines IL-8 and CXCL10 that were found to be augmented in adipose tissue inflammation in CC which was more profound in the visceral adipose tissue (VAT) than in subcutaneous adipose tissue (SAT). Systemic inflammation was negatively associated with the expression of PUFA synthesizing enzymes, though gene and protein expression did hardly differ between groups. The effects of inflammatory factors on enzymes in the whole tissue could have been masked by differentiated modulation of the diverse cell types in the same tissue. In vitro experiments showed that the expression of FA-modifying enzymes such as desaturases and elongases in adipocytes and macrophages was regulated into opposing directions by TNF-α, IL-6, LPS or palmitate. The higher plasma concentration of the pro-resolving LM resolvin D1 in CC cannot compensate the overall inflammatory status and the results indicate that inflammatory cytokines interfere with synthesis pathways of pro-resolving LM. In summary, the data revealed a complex inter-tissue and inter-cellular crosstalk mediated by pro-inflammatory cytokines and lipid compounds enhancing inflammation in cancer cachexia by feed-forward mechanisms. N2 - Systemische Entzündung ist ein grundlegendes Merkmal der Tumorkachexie. Bei den entzündungstreibenden Wechselwirkungen zwischen Tumor und Wirt spielt das weiße Fettgewebe eine besondere Rolle, da es, bedingt durch morphologische Veränderungen und Lipolyse, freie Fettsäuren, bioaktive Lipidmediatoren (LM) und pro-inflammatorische Cytokine freisetzt. Diese verschiedenen Substanzen verstärken die Aktivierung entzündungsfördernder Signalwege und eine Rekrutierung von Immunzellen in das Gewebe. Das Ziel dieser Arbeit war es daher zu untersuchen, welche Faktoren an der Entwicklung der lokalen Fettgewebsentzündung beteiligt sind und wie diese Faktoren Syntheseenzyme von Fettsäuren und Lipidmediatoren beeinflussen könnten. Dazu wurden Plasma und Fettgewebeproben von gesunden Kontrollpersonen (Control) und normalgewichtigen (WSC) sowie kachektischen Magen-Darm-Krebs-Patienten (CC) untersucht. Die Ergebnisse zeigten, dass sich die inflammatorischen Charakteristiken der systemischen Entzündung von denen der lokalen Fettgewebsentzündung unterscheiden. Die systemische Entzündung war gekennzeichnet durch höhere Spiegel gesättigter Fettsäuren (SFA), Tumor-necrosis-factor alpha (TNF-α), Interleukin IL-6, IL-8 und C-reactive protein (CRP) während die Konzentrationen von mehrfachungesättigten Fettsäuren (PUFA) –besonders n3-Fettsäuren- geringer in CC waren als in den anderen Gruppen. In vitro und in ex vivo kultivierten Fettgewebssegmenten konnte gezeigt werden, dass die Inkubation mit pro-inflammatorischen Cytokinen und gesättigten Fettsäuren zu einem Anstieg der Chemokine IL-8 sowie CXCL10 führte. Erhöhte Spiegel dieser Moleküle wurden auch in der Fettgewebsentzündung bei kachektischen Patienten beobachtet, welche im viszeralen Fettgewebe ausgeprägter war als im subkutanen. Systemische Entzündungsmarker waren negativ mit der Expression PUFA-synthetisierender Enzyme assoziiert, obwohl sich Gesamt-mRNA-sowie Proteingehalt kaum zwischen den Studiengruppen unterschieden. Die Effekte von Entzündungsfaktoren auf diese Enzyme im Gesamtgewebe könnten durch eine differenzielle Modulierung in diversen Zelltypen des Gewebes maskiert sein. Denn in in vitro-Experimenten zeigte die Inkubation mit TNF-α, IL-6, LPS oder Palmitat, dass die GeneExpression von Fettsäure-modifizierenden Enzymen wie Desaturasen oder Elongasen in Adipozyten und Makrophagen in entgegengesetzte Richtungen reguliert wird. Die höhere Plasmakonzentration des entzündungslösenden LM Resolvin D1 in CC konnte dem inflammatorischen Zustand nicht entgegenwirken und die Ergebnisse deuten darauf hin, dass inflammatorische Cytokine in die Synthesewege von entzündungslösenden LM eingreifen. Zusammenfassend demonstrieren die Daten das komplexe Zusammenspiel zwischen verschiedenen Geweben und Zelltypen, in dem Cytokine und Lipidverbindungen aus dem Blutkreislauf die Entzündung der Tumorkachexie durch selbst-verstärkende Mechanismen vorantreiben. N2 - A inflamação sistêmica é uma das características que marcam o diagnóstico da caquexia associada ao câncer. Entre as interações tumor-hospedeiro, o tecido adiposo branco contribui à inflamação, uma vez que ele sofre uma reorganização morfológica e lipólise, liberando ácidos graxos livres (AGLs), mediadores lipídicos (LMs) e citocinas pró-inflamatórias, que acentuam a ativação de vias de sinalização pró-inflamatória e o recrutamento de células do sistema imunológico para o tecido. O objetivo deste projeto foi investigar quais fatores inflamatórios sistêmicos estão envolvidos na inflamação do tecido adiposo e qual é a influência desses fatores sobre as enzimas envolvidas no metabolismo dos AGs ou LMs em indivíduos saudáveis (Controle), pacientes com câncer gastrointestinal com peso estável (WSC) e pacientes com câncer e caquexia (CC). Os resultados demonstraram que a resposta inflamatória sistêmica é diferente da resposta encontrada no tecido adiposo. A inflamação sistêmica dos pacientes com câncer e caquexia (CC) foi caracterizada por níveis circulantes mais elevados de ácidos graxos saturados (SFAs), tumor-necrosis-factor-α (TNF-α), Interleukin IL-6, IL-8 e proteina C-reativa (PCR), enquanto os níveis de ácidos graxos poliinsaturados (PUFAs), especialmente n3-PUFAs, foram menores em CC que nos demais grupos. In vitro e em explantes de tecido adiposo, citocinas pró-inflamatórias e SFAs aumentaram a expressão das quimiocinas IL-8 e CXCL10. E tambêm observamos um aumento na expressão destas quimiocinas na inflamação do tecido adiposo no CC, que era mais profundo no tecido adiposo visceral (VAT) quando comparado ao tecido adiposo subcutâneo (SAT). A inflamação sistêmica foi negativamente associada com a expressão de enzimas sintetizadoras dos PUFAs, embora a expressão gênica e protéica mostraram somente pequenas diferencias entre os grupos. Os efeitos dos fatores inflamatórios sobre as enzimas no tecido adiposo podem ter sido mascarados pela modulação diferenciada dos diversos tipos celulares constituintes desse tecido. Experimentos in vitro mostraram que a expressão de enzimas que modificam os AGs, tais como as dessaturases e elongases em adipócitos e macrófagos, foram reguladas em direções opostas por TNF-α, IL-6, LPS e palmitato. Mesmo os pacientes CC demonstrando uma maior concentração plasmática da Resolvina D1, que é um mediador lipídico de resolução da inflamação, ainda assim, a inflamação sistêmica é maior nesses pacientes, e os resultados indicam que as citoquinas inflamatórias interferem com as vias de síntese das LMs da resolução. Concluímos que, os dados revelaram um crosstalk inter-tecidual e intercelular complexo mediado por citocinas pró-inflamatórias e compostos lipídicos que aumentam a inflamação na caquexia associada ao câncer por mecanismos autoregulação. KW - cancer cachexia KW - inflammation KW - adipose tissue KW - cytokines KW - chemokines KW - SFA KW - PUFA Y1 - 2018 ER - TY - THES A1 - Pons, Michaël T1 - The Nature of the tectonic shortening in Central Andes T1 - Die Beschaffenheit der tektonischen Verkürzung in den Zentralanden N2 - The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that “bulldozes” the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as “flat-slab conveyor”. Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively. N2 - Die Andenkordillere ist ein Gebirgszug am westlichen Rand Südamerikas und Teil des östlichen zirkumpazifischen Gebirgsgürtels. Der ~7000 km lange Gebirgszug ist einer der längsten der Erde und beherbergt mit dem Altiplano-Puna-Plateau das zweitgrößte orogenetische Plateau der Welt. Die Anden sind als nicht-kollisionsbedingtes Subduktionsgebirge bekannt, das durch die Wechselwirkung zwischen der subduzierten ozeanischen Nazca-Platte und der südamerikanischen Kontinentalplatte entstanden ist. Entlang des Höhenzugs der Anden lassen sich Segmente unterschiedlicher morphotektonischer Provinzen ausmachen, die durch Variationen in topographischer Höhe, vulkanischer Aktivität, Deformationsform, Krustendicke, Krustenverkürzung und ozeanischer Plattengeometrie gekennzeichnet sind. Der größte Teil der heutigen Hebung lässt sich durch die Krustenverkürzung der letzten 50 Mio. Jahre erklären, wobei das Ausmaß der Verkürzung von ca. 300 km im zentralen Segment (15°S-30°S) auf weniger als die Hälfte im südlichen Teil (30°S-40°S) abnimmt. Es wurden mehrere Faktoren vorgeschlagen, die das Ausmaß und die Beschleunigung der Verkürzung der zentralen Anden in den letzten 15 Mio. Jahren beeinflusst haben könnten. Ein wichtiger Faktor ist wahrscheinlich die Plattengeometrie. Durch die Subduktion des Juan-Fernandez-Rückens und dessen hohe Auftriebskraft fällt die Platte bei 27-33°S in ~100 km Tiefe horizontal ein und bildet den pampeanischen flat-slab. Es wird angenommen, dass die horizontale Subduktion den thermomechanischen Zustand des Sierras-Pampeanas-Vorlandes beeinflusst, indem sie beispielsweise die Lithosphäre stärkt und die dickschalige Verlagerung der Deformation nach Osten sowie die Hebung der kristallinen Basis der Sierras-Pampeanas fördert. Vor etwa 30 Mio. Jahren verschob sich der flat-slab von der geographischen Breite des Altiplano zu seiner heutigen Position nach Süden. Die mit der Positionsverlagerung verbundenen Prozesse und Folgen für die gleichzeitige Beschleunigung der Verkürzungsraten in den zentralen Anden sind noch immer unklar. Obwohl die Passage des flat-slab eine Erklärung für dafür sein könnte, erklärt ihr Zeitpunkt nicht die beiden aus der Geologie abgeleiteten Verkürzungsimpulse vor etwa 15 und 4 Mio. Jahren. Ich stelle die Hypothese auf, dass die Deformation in den zentralen Anden durch eine komplexe Wechselwirkung zwischen der Subduktionsdynamik der Nazca-Platte und der dynamischen Materialschwächung der südamerikanischen Platte aufgrund einer Reihe von Prozessen in der oberen Platte gesteuert wird. Um diese Hypothese zu prüfen, ist eine detaillierte Untersuchung der Rolle des flat-slab, sowie der strukturellen Vererbung der Kontinentalplatte und der Subduktionsdynamik in den Anden erforderlich. Daher habe ich zwei Klassen von numerischen thermomechanischen Modellen erstellt: (i) Die erste Klasse von Modellen umfasst eine Reihe von generischen E-W-orientierten 2D-Subduktionsmodellen mit hoher Auflösung. Diese beinhalten subhorizontalen Subduktion um die Rolle der Subduktionsdynamik auf die zeitliche Variabilität der Verkürzungsrate in den zentralen Anden auf dem Altiplano (~21°S) zu untersuchen. Die modellierte Verkürzungsrate wurde mit der beobachteten tektonischen Verkürzungsrate in den zentralen Anden validiert. (ii) Die zweite Klasse von Modellen besteht aus einer Reihe von datengesteuerten 3D-Modellen der heutigen pampeanischen flat-slab-Konfiguration und der Sierras Pampeanas (26-42°S). Diese Modelle zielen darauf ab, den relativen Beitrag der heutigen subhorizontalen Subduktion und der ererbten Strukturen in der kontinentalen Lithosphäre zur Dehnungslokalisierung zu untersuchen. Beide Modellklassen wurden mit Hilfe des fortschrittlichen geodynamischen Finite-Elemente-Codes ASPECT erstellt. Das erste Hauptergebnis dieser Arbeit ist die Vermutung, dass zeitliche Änderungen der Verkürzung in den Zentralanden in erster Linie durch die Subduktionsdynamik der Nazca-Platte gesteuert werden, während diese in die Mantelübergangszone eindringt. Die Dynamik hängt von der westwärts gerichteten Geschwindigkeit der südamerikanischen Platte ab, die die Hauptantriebskraft für die Krustenverkürzung in den Anden darstellt und den Subduktionsgraben zum Zurückziehen zwingt. Wenn die subduzierende Platte den unteren Erdmantel erreicht, wölbt sie sich auf, bis der erzwungene Rückzug des Grabens dazu führt, dass auch die Platte im oberen Erdmantel steiler wird. Die aufgesteilte Platte behindert wiederum den Graben, der sich der vorrückenden südamerikanischen Platte widersetzt, was eine pulsierende Verkürzung zur Folge hat. Dieses Subduktionsregime, bestehend aus Aufwölbung und Aufsteilung, könnte durch die allgemeine westwärts gerichtete Geschwindigkeitsabnahme der südamerikanischen Platte ausgelöst worden sein. Der Durchgang des flat-slab ist zudem eine notwendige Bedingung, um die Verkürzung der Kontinentalplatte voran zu treiben, da subhorizontale Subduktion Teile der Mantellithosphäre abträgt und so die Kontinentalplatte schwächt. Dieser Prozess trägt somit zur effizienten Verkürzung bei während der Graben behindert wird und ist gefolgt von der Ablösung der Mantellithosphäre vor etwa 20 Mio. Jahren. Das Subduzieren des brasilianischen kratonischen Schildes unter das Orogen erfolgte schließlich vor etwa 11 Mio. Jahren aufgrund der mechanischen Schwächung der dicken Sedimentschicht, die den Schildrand bedeckte, sowie wegen des abnehmenden Widerstands der geschwächten Gebirgslithosphäre. Das zweite Hauptergebnis dieser Arbeit ist die Vermutung, dass der kalte flat-slab die darüber liegende kontinentale Lithosphäre stärkt und damit verhindert, dass sich Verformungen lokalisieren können. Daher wird die Deformation durch die an der Subduktionsfläche wirkende Scherspannung auf die östliche Front des flat-slab-Segments übertragen. Der flat-slab wirkt wie ein Eindringling, der die unter mantle-keel bekannte Anhäufung von abgelöstem Mantelmaterial beiseite schiebt. Der Versatz in der ostwärts gerichteten Deformationsausbreitung der flachen und der steileren Plattensegmenten im Süden führt zur Bildung einer transpressiven dextralen Scherungszone. Hier werden ererbte Verwerfungen vergangener tektonischer Ereignisse reaktiviert und helfen bei der Lokalisierung neuer Deformation in einer en-echelon-artigen Scherungszone. Dies geschieht durch einen Mechanismus, den ich als "flat-slab-Conveyor" bezeichne. Das laterale Zusammenschieben wird besonders durch das Flacherwerden des flat-slab beeinflusst, welches den Zeitpunkt mehrerer geologischer Ereignisse erklärt, die der Ankunft des flat-slab bei 33°S vorangehen. Dazu gehören der Beginn der Kompression und der Übergang von dünn- zu dickschaliger Deformation, die sich aus der Krustenkontraktion in den Sierras Pampeanas etwa 10 bzw. 6 Mio. Jahre vor der Kollision mit dem Juan-Fernandez-Rücken auf diesem Breitengrad ergaben. KW - Andes KW - Orogen KW - tectonics KW - Subduction KW - Deformation KW - Shortening KW - Flat subduction KW - Geodynamics KW - Altiplano KW - Puna KW - Sierras Pampeanas KW - Foreland KW - Altiplano KW - Anden KW - Deformation KW - Flache Subduktion KW - Vorland KW - Geodynamik KW - Orogen KW - Puna KW - Verkürzung KW - Sierras Pampeanas KW - Subduktion KW - Tektonik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-600892 ER - TY - THES A1 - De Andrade Queiroz, Anna Barbara T1 - The Milky Way disks, bulge, and bar sub-populations T1 - Die Scheiben, der Bulge und der Balken der Milchstraße Subpopulationen BT - a chemo-dynamical view of our Galaxy in the APOGEE + Gaia era BT - ein chemodynamischer Blick auf unsere Galaxie in der APOGEE + Gaia Ära N2 - In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology. At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates. We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood. We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages. With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation. N2 - In den letzten Jahrzehnten hat die Astronomie mit großen galaktischen Durchmusterungen einen Boom erlebt. Die dadurch gewonnenen detaillierten Informationen über Millionen von Einzelsternen in der Milchstraße bringen uns der Beantwortung einer der wichtigsten Fragen der Astrophysik einen Schritt näher: Wie entstehen und entwickeln sich Galaxien? Die Milchstraße ist die einzige Galaxie, in der wir viele Sterne in ihre hochdimensionale chemische Zusammensetzung und ihren vollständigen Phasenraum zerlegen können, was analog zu fossilen Aufzeichnungen die Entstehungsgeschichte der Galaxie enthüllen kann. Für kosmologische Modelle ist es von entscheidender Bedeutung, die Prozesse zu verstehen, die zur Bildung großer Strukturen wie der Milchstraße führen; wir nennen diese Studienrichtung Galaktische Archäologie oder Nahfeldkosmologie. Im Mittelpunkt dieser Arbeit stehen die Bemühungen, die Scheiben und den Bulge unserer Galaxie chemisch und dynamisch zu charakterisieren. Die Ergebnisse, die wir in dieser Arbeit vorstellen, waren nur dank des starts des astrometrischen Satelliten Gaia möglich, der das Gebiet der galaktischen Archäologie durch die präzise Messung der Positionen, Parallaxenwinkel und Eigenbewegungen von mehr als einer Milliarde Sterne revolutioniert hat. Ein weiterer, aber nicht minder wichtiger Durchbruch ist die APOGEE-Durchmusterung, die Spektren im nahen Infrarot beobachtet hat, was es uns erlaubt, durch die staubigen Regionen der Milchstraße hindurchzublicken und die chemischen Fingerabdrücke von Hunderttausenden von Sternen zu bestimmen. Um die Struktur der Milchstraße genau darzustellen, verwenden und entwickeln wir das Isochrone-fitting-Tool StarHorse; diese Software kann Sternentfernungen, Aussterbezeiten und Alter vorhersagen, indem sie Astrometrie, Photometrie und Spektroskopie auf der Grundlage von Modellen der Sternentwicklung kombiniert. Der Code StarHorse ist von zentraler Bedeutung für die Berechnung von Entfernungen, bei denen Gaia -Parallaxen allein keine Bestimmung ermöglichen. Wir zeigen, dass wir durch die Kombination von Gaia, APOGEE und StarHorse eine chemische Kartographie der Milchstraßenscheiben von ihrem äußersten bis zum innersten Teil erstellen können. Eine solche Karte ist in der inneren Galaxis beispiellos und zeigt ein bimodales chemisches Muster, das auf zwei Populationen mit unterschiedlichen Entstehungsgeschichten hinweist. Darüber hinaus bestätigen die Daten einen chemischen Gradienten innerhalb der dünnen Scheibe, bei dem der Gehalt an Elementen und Metallen aus 𝛼-Prozessen zum Zentrum hin zunimmt ist. Eine Überdichte in der Anzahl der Sterne bestätigt zudem die Signatur eines Balkens in der inneren Galaxie. Modelle der Galaxienentstehung sagen gewöhnlich deren Beginn im galaktischen Zentrum voraus. Wir konzentrieren uns auf eine Stichprobe in der inneren Galaxie und erwarten, dass wir primordiale stellare Populationen finden. Wir bestätigen die chemische Bimodalität der inneren Galaxie und dass der galaktische Balken sowohl aus Sternen mit hohem als auch mit niedrigem 𝛼 besteht, was darauf hindeutet, dass sich der Balken durch säkulare Evolution gebildet hat, bei der bereits existierende Sterne eingefangen wurden. Durch die Analyse des chemischen Orbitalraums der inneren galaktischen Regionen können wir die verschiedenen Populationen, die diese komplexe Region bewohnen, unterscheiden. Wir zeigen das Vorhandensein einer dünnen Scheibe, einer dicken Scheibe, eines Balkens und einer gegenläufig rotierenden Population, die dem Ergebnis einer gestörten proto-galaktischen Scheibe ähnelt. Unsere Studie zeigt auch, dass die innere Galaxie eine große Menge an supermetallreichen Sternen enthält, die bis zum Dreifachen der solaren Metallizität reichen. Möglicherweise handelt es sich bei der Gruppe alter supermetallreicher Sterne, die in der Sonnenumgebung gefunden wurden um Kandidaten für Migranten aus den innersten Regionen. Wir befassen uns auch mit der komplizierten Aufgabe der Bestimmung individueller Sternalter. Mit StarHorse berechnen wir das Alter von Hauptreihenabzweig- und Unterriesensternen für mehrere öffentliche spektroskopische Durchmusterungen. Wir validieren unsere Ergebnisse, indem wir lineare Abhängigkeiten zwischen den chemischen Häufigkeiten und der Zeit untersuchen, da die 𝛼- und Neutroneneinfang-Elemente empfindlich auf das Alter reagieren, was auf die unterschiedlichen Zeitskalen der Anreicherung dieser Elemente zurückzuführen ist. Zur weiteren Untersuchung der Scheiben in der Sonnenumgebung verwenden wir einen nicht überwachten Algorithmus für maschinelles Lernen, um eine mehrdimensionale Trennung der chrono-chemischen Sterngruppen vorzunehmen. Dies macht die chemisch dicke Scheibe, die dünne Scheibe und junge 𝛼 Sterne erkennbar. Es zeigt sich, dass die dicke Scheibe eine geringe Altersstreuung aufweist, was auf ihre schnelle Entstehung hindeutet, während die dünne Scheibe eine große Altersspanne abdeckt. Mit bahnbrechenden Daten liefert diese Arbeit ein detailliertes chemodynamisches Bild der Scheibe und des Bulge der Galaxis. Unsere Erkenntnisse über die Milchstraße können mit der Entwicklung von Scheibengalaxien mit hoher Rotverschiebung in Verbindung gebracht werden und so zur Lösung des Rätsels der Galaxienbildung beitragen. KW - stars: distances KW - fundamental parameters KW - statistics KW - galaxy: general KW - disc KW - bulge KW - stellar content KW - Bulge KW - Scheibe KW - fundamentale Parameter KW - Galaxie: allgemein KW - Sterne: Entfernungen KW - Statistik KW - stellarer Inhalt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590615 ER - TY - THES A1 - Ketzer, Laura T1 - The impact of stellar activity evolution on atmospheric mass loss of young exoplanets T1 - Der Einfluss der stellaren Aktivitätsentwicklung auf den atmosphärischen Massenverlust von jungen Exoplaneten N2 - The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance. In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population. N2 - Die steigende Anzahl bekannter Exoplaneten wirft Fragen zu ihrer Demografie und den Mechanismen auf, die Planeten in ihre heutige beobachtete Form bringen. Junge Planeten, die sehr nah um ihren Wirtsstern kreisen, sind extremen Umgebungen ausgesetzt, da der Stern eine hohe magnetische Aktivität aufweist. Das führt wiederum dazu, dass der Planet einer enormen Röntgen- und Extrem-UV-Strahlung ausgesetzt ist. Ist der Planet über einen längeren Zeitraum dieser intensiven photoionisierenden Strahlung ausgesetzt, kann dies dazu führen, dass Planetenatmosphären sich aufheizen, ausdehnen und durch einen hydrodynamischen Entweichungsprozess namens Photoevaporation ins All entweichen, sozusagen verdampfen. Bei Planeten, in der Größenordnung von Super-Erden und Sub-Neptunen, kann dies sogar zur vollständigen Erosion ihrer Ur-Atmosphären führen. Ein interessanter Faktor, der für diesen Massenverlustprozess eine Rolle spielt, ist die Aktivitätsentwicklung des Wirtssterns. Die Rotation eines Sterns, die den Dynamo und damit die magnetische Aktivität antreibt, ändert sich im Laufe der Lebensdauer eines Sterns erheblich. Dies hat einen starken Einfluss auf die Menge der hochenergetischen Strahlung, den ein Planet mit zunehmendem Alter des Sterns empfängt. In jungen Jahren besitzen Planeten noch warme und ausgedehnte Hüllen, was sie besonders anfällig für atmosphärische Verdunstung macht. Insbesondere in den ersten Gigajahren, wenn die Röntgen- und UV-Strahlung 100 - 10,000 Mal höher sein kann als bei der heutigen Sonne, sind die Eigenschaften des Wirtssterns und die detaillierte Entwicklung seiner hochenergetischen Emission von Bedeutung. In dieser Arbeit untersuche ich die Auswirkungen der Entwicklung der stellaren Aktivität auf den durch hochenergetische Strahlung verursachten atmosphärischen Massenverlust junger Exoplaneten. Der PLATYPOS-Code wurde im Rahmen dieser Arbeit entwickelt, um die photoevaporativen Massenverlustraten für verschiedene stellare Alter zu berechnen. Der Code verknüpft parametrisierte Planetenmasse-Radius-Beziehungen mit einem analytischen Modell für den hydrodynamischen Massenverlust. Er wurde zusammen mit Chandra- und eROSITA-Röntgenbeobachtungen dazu verwendet, den zukünftigen Massenverlust der beiden jungen Mehrplanetensysteme V1298 Tau und K2-198 zu untersuchen. Darüber hinaus wurde in einer numerischen Ensemblestudie erstmals der Effekt einer realistischen Verteilung von stellaren Aktivitäts-Tracks auf das sogenannte Radius-Tal bei kleinen Planeten untersucht. Die Arbeiten in dieser Dissertation zeigen, dass für einzelne Systeme, insbesondere wenn die Planetenmassen unbestimmt sind, der Unterschied zwischen einem jungen Wirtsstern, der einem Track mit niedriger Aktivität gegenüber einem solchen mit hoher Aktivität folgt, gravierende Auswirkungen haben kann: Die genaue Form der Aktivitätsentwicklung kann darüber entscheiden, ob ein Planet einen Teil seiner Atmosphäre behält oder seine Hülle vollständig verliert und nur den nackten Gesteinskern behält. Für ein Ensemble von simulierten Planeten ändert eine durch Beobachtungen motivierte Verteilung von Aktivitäts-Tracks die endgültige Radiusverteilung der Planeten nach mehreren Gigajahren nicht wesentlich. Meine Simulationen deuten darauf hin, dass die Form und Steigung des sich ergebenden Radius-Tals bei Kleinplaneten nicht wesentlich von der Streuung der stellaren Aktivitäts-Tracks beeinflusst wird. Eine gewisse Streuung oder Unschärfe im Radius-Tal der beobachteten Exoplanetenpopulation kann damit allerdings durchaus erklärt werden. KW - Exoplaneten KW - star-planet interaction KW - stellar physics KW - exoplanets KW - exoplanet atmospheres KW - Sternphysik KW - Stern-Planeten-Wechselwirkung KW - Exoplanetenatmosphären Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-626819 ER - TY - THES A1 - Kerutt, Josephine Victoria T1 - The high-redshift voyage of Lyman alpha and Lyman continuum emission as told by MUSE T1 - Die Reise der Lyman alpha- und Lyman Kontinuumsemission bei hoher Rotverschiebung erzählt von MUSE N2 - Most of the matter in the universe consists of hydrogen. The hydrogen in the intergalactic medium (IGM), the matter between the galaxies, underwent a change of its ionisation state at the epoch of reionisation, at a redshift roughly between 6>z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe. Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties. Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity. With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond. N2 - Die Materie zwischen den Galaxien im Universum, das sogenannte intergalaktische Medium, besteht zum größten Teil aus Wasserstoff, welcher sich zusammensetzt aus einem Proton und einem Elektron. Etwa ~10^8 Jahre nach dem Urknall änderte sich der Ionisationszustand des Wasserstoffs im intergalaktischen Medium. Durch Strahlung wurden Proton und Elektronen getrennt, der Wasserstoff wurde ionisiert. Die Strahlung mit der nötigen Energie um Wasserstoff zu ionisieren nennt man Lyman Kontinuum Strahlung. Woher diese stammt ist bis heute eine offene Frage. In der vorliegenden Arbeit diskutiere ich die wahrscheinlichsten Kandidaten für die Emission dieser ionisierenden Strahlung: die Lyman alpha Emitter (LAE), eine Gruppe von Galaxien die man im frühen Universum antrifft. Hat nämlich ein Lyman Kontinuum Photon ein Wasserstoffatom ionisiert, kommt es häufig vor, dass sich Proton und Elektron wieder zu einem neutralen Wasserstoffatom verbinden. Bei diesem Prozess wird dann ein Lyman alpha Photon freigesetzt, was den LAE ihren Namen gibt. Da wir in den Spektren dieser Galaxien die Lyman alpha Photonen beobachten können, deren Voraussetzung die Existenz von Lyman Kontinuum Emission in der Galaxie ist, liegt es nahe anzunehmen, dass die Lyman Kontinuum Emission auch in das intergalaktische Medium vordringen kann um den Wasserstoff dort ebenfalls zu ionisieren. Durch diesen Mechanismus sind Lyman alpha und Lyman-Kontinuumsstrahlung eng miteinander verbunden und werden in dieser Arbeit beide untersucht, um die Eigenschaften von Galaxien im frühen Universum und den Zustand des Wasserstoffs im intergalaktischen Medium besser zu verstehen. Der erste Schritt ist jedoch die Detektion und korrekte Klassifizierung von LAE. Dafür benutze ich Daten des Multi-Unit Spectroscopic Explorer (MUSE), ein Instrument mit dem Beobachtungen möglich sind, die zwei räumliche Dimensionen mit einer spektralen Dimension verbinden. Somit ist in jedem Pixel der Daten ein Spektrum zur Verfügung, in dem nach Emissionslinien gesucht werden kann. Nach der Detektion von Emissionslinien in den MUSE-Daten wird die Aufgabe der Klassifizierung von der grafischen Benutzeroberfläche QtClassify unterstützt, die ich in dieser Arbeit entwickelt habe. Sie bietet dem Benutzer eine schnelle und übersichtliche Identifizierung der gefundenen Emissionslinien, was einen entscheidenden ersten Schritt zur Analyse der Eigenschaften der LAE darstellt. Da Lyman alpha Photonen in neutralem Wasserstoff, der im Inneren von Galaxien in Gaswolken vorkommt, gestreut wird, verändert sich die Form der Lyman alpha Emissionslinie im Spektrum. Nachdem also die LAE mit Hilfe von QtClassify identifiziert werden konnten, analysiere ich die Lyman alpha Linie hinsichtlich ihrer Breite, ihrer Symmetrie und ihrer Stärke und suche nach Doppellinien, die Hinweise auf die Kinematik der Wasserstoff Gaswolken geben. Besonders wichtig dabei ist die Stärke der Linie im Vergleich zum restlichen Spektrum, die sogenannte Äquivalentbreite. Dabei zeige ich, dass die übliche Methode die Verteilung der Äquivalentbreiten als Histogramme darzustellen ohne die Detektionsgrenzen der Beobachtungen miteinzubeziehen keine Aussage über die Eigenschaften der LAE, sondern lediglich über die Grenzen der Beobachtungen treffen. Daher konstruiere ich eine unabhängigere Verteilungsfunktion, die diese Grenzen mit einbezieht. Ich verdeutliche dies durch einen Vergleich des Anteils von Objekten mit hoher Äquivalentbreite in zwei verschiedenen Datensätzen, die auf Beobachtungen mit unterschiedlicher Belichtungszeit beruhen. Dabei finde ich in dem Datensatz mit der kürzeren Belichtungszeit einen Anteil von ~20% an Objekten mit hohen Äquivalentbreiten (über >240A) und nur ~1% im Datensatz mit der zehnfach längeren Belichtungszeit obwohl die Eigenschaften der LAE gleich sind. Zudem finde ich eine Galaxie mit einer Äquivalentbreite der Lyman alpha Linie von 600 +- 110A, was auf eine ungewöhnliche Sternpopulation hindeutet. Als letzten Schritt suche ich in den klassifizierten LAE nach Lyman Kontinuum, was für die Ionisierung des Wasserstoffs im intergalaktischen Medium verantwortlich ist, und untersuche den Zusammenhang zwischen der Lyman alpha und der Lyman Kontinuumsstrahlung. Um das Lyman Kontinuum detektieren zu können benutze ich Daten des Hubble-Weltraumteleskops (HST) und finde sechs Lyman Kontinuum Kandidaten unter den LAE. Um zu testen ob die Lyman Kontinuumsstrahlung lediglich von diesen Objekten ausgeht oder auch im der Gesamtheit der LAE zu finden ist, addiere ich die Daten des HST und finde ein Signal, was darauf hindeutet, dass ~80% der Lyman Kontinuumsstrahlung aus den Galaxien entkommen und in das intergalaktische Medium vordringen kann. Wenn das gefundene Signal zuverlässig ist deutet es darauf hin, dass in der Tat LAE für die Ionisierung des Wasserstoffs im Universum verantwortlich sein könnten. KW - astronomy KW - LAEs KW - reionization KW - Lyman alpha KW - Lyman continuum KW - VLT/MUSE KW - emission line classification KW - QtClassify KW - LAEs KW - Lyman alpha KW - Lyman Kontinuum KW - QtClassify KW - VLT/MUSE KW - Astronomie KW - Emissionslinienklassifikation KW - Reionisierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-478816 ER - TY - THES A1 - Rinne, Theresa Charlotte T1 - The effects of nutrients on bone stem cell function and regeneration N2 - Aging is associated with bone loss, which can lead to osteoporosis and high fracture risk. This coincides with the enhanced formation of bone marrow adipose tissue (BMAT), suggesting a negative effect of bone marrow adipocytes on skeletal health. Increased BMAT formation is also observed in pathologies such as obesity, type 2 diabetes and osteoporosis. However, a subset of bone marrow adipocytes forming the constitutive BMAT (cBMAT), arise early in life in the distal skeleton, contain high levels of unsaturated fatty acids and are thought to provide a physiological function. Regulated BMAT (rBMAT) forms during aging and obesity in proximal regions of the bone and contain a large proportion of saturated fatty acids. Paradoxically, BMAT accumulation is also enhanced during caloric restriction (CR), a life-span extending dietary intervention. This indicates, that different types of BMAT can form in response to opposing nutritional stimuli with potentially different functions. To this end, two types of nutritional interventions, CR and high fat diet (HFD), that are both described to induce BMAT accumulation were carried out. CR markedly increased BMAT formation in the proximal tibia and led to a higher proportion of unsaturated fatty acids, making it similar to the physiological cBMAT. Additionally, proximal and diaphyseal tibia regions displayed higher adiponectin expression. In aged mice, CR was associated with an improved trabecular bone structure. Taken together, these findings demonstrate, that the type of BMAT that forms during CR might provide beneficial effects for local bone stem/progenitor cells and metabolic health. The HFD intervention performed in this thesis showed no effect on BMAT accumulation and bone microstructure. RNA Seq analysis revealed alterations in the composition of the collagen-containing extracellular matrix (ECM). In order to investigate the effects of glucose homeostasis on osteogenesis, differentiation capacity of immortalized multipotent mesenchymal stromal cells (MSCs) and osteochondrogenic progenitor cells (OPCs) was analyzed. Insulin improved differentiation in both cell types, however, combination of with a high glucose concentration led to an impaired mineralization of the ECM. In the MSCs, this was accompanied by the formation of adipocytes, indicating negative effects of the adipocytes formed during hyperglycemic conditions on mineralization processes. However, the altered mineralization pattern and structure of the ECM was also observed in OPCs, which did not form any adipocytes, suggesting further negative effects of a hyperglycemic environment on osteogenic differentiation. In summary, the work provided in this thesis demonstrated that differentiation commitment of bone-resident stem cells can be altered through nutrient availability, specifically glucose. Surprisingly, both high nutrient supply, e.g. the hyperglycemic cell culture conditions, and low nutrient supply, e.g. CR, can induce adipogenic differentiation. However, while CR-induced adipocyte formation was associated with improved trabecular bone structure, adipocyte formation in a hyperglycemic cell-culture environment hampered mineralization. This thesis provides further evidence for the existence of different types of BMAT with specific functions. Y1 - 2024 ER - TY - THES A1 - Regel, Stefanie T1 - The comprehension of figurative language : electrophysiological evidence on the processing of irony T1 - Zum Verstehen figurativer Sprache : elektrophysiologische Studien zur Verarbeitung von Ironie N2 - Diese Dissertation untersucht das Verstehen figurativer Sprache, im Besonderen die zeitliche Verarbeitung von verbaler Ironie. In sechs Experimenten wurde mittels ereignis-korrelierter Potentiale (EKP) die Gehirnaktivität beim Verstehen ironischer Äußerungen im Vergleich zu entsprechenden nicht-ironischen Äußerungen gemessen und analysiert. Darüberhinaus wurde der Einfluss verschiedener sprachbegleitender Hinweisreize, z.B. von Prosodie oder der Verwendung von Satzzeichen, sowie außersprachlicher Hinweisreize, wie bspw. pragmatischen Wissens, auf das Ironieverstehen untersucht. Auf Grundlage dieser Ergebnisse werden verschiedene psycholinguistische Modelle figurativer Sprachverarbeitung, d.h. 'standard pragmatic model', 'graded salience hypothesis', sowie 'direct access view', diskutiert. N2 - This dissertation investigates the comprehension of figurative language, in particular the temporal processing of verbal irony. In six experiments using event-related potentials(ERP) brain activity during the comprehension of ironic utterances in relation to equivalent non-ironic utterances was measured and analyzed. Moreover, the impact of various language-accompanying cues, e.g., prosody or the use of punctuation marks, as well as non-verbal cues such as pragmatic knowledge has been examined with respect to the processing of irony. On the basis of these findings different models on figurative language comprehension, i.e., the 'standard pragmatic model', the 'graded salience hypothesis', and the 'direct access view', are discussed. KW - Figurative Sprachverarbeitung KW - verbale Ironie KW - Pragmatik KW - Diskursverstehen KW - EKP KW - Figurative language processing KW - verbal irony KW - pragmatics KW - discourse comprehension KW - ERP Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33376 ER - TY - THES A1 - Kim, Jiyong T1 - Synthesis of InP quantum dots and their applications N2 - Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD–LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III–V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis–mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III–V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically. N2 - Umweltfreundliche InP Quantenpunkte (QDs) sind technologisch relevant und werden typischerweise als grüne und rote Emitter in Bildschirmen verwendet. Nach dem Stand der Technik kann eine sorgfältig hergestellte Kern-Schale-Heterostruktur (ZnSe innen/ZnS außen) zu außergewöhnlich hohen Photolumineszenz-Quantenausbeuten (PL-QYs) von nahezu Eins (95 - 100 %) führen. Dennoch gibt es bisher nur einige wenige industrielle Anwendungen wie QD-Flüssigkristall-Bildschirme (liquid crystal display, QD-LCD), in denen die Anregung durch eine blaue Hintergrundbeleuchtung realisiert wird. Dabei haben QDs aufgrund ihrer Modifizierbarkeit noch viele weitere industrielle Einsatzmöglichkeiten, beispielsweise QD basierte lichtemittierende Dioden (QD-LEDs) und lumineszierende Solarkollektoren (luminescence solar concentrator, LSC). Vor dem Hauptteil werden in den Kapiteln 1 und 2 die Grundlagen von QDs und die theoretischen Grundlagen basierend auf quantenmechanischer Beschreibung und experimentellen Ergebnissen eingeführt. Zum besseren Verständnis werden: das Konzept der QDs, kolloidale QDs, Kern-Schale-Strukturen vom Typ I, mit Übergangsmetallen dotierte Halbleiter-QDs, die Oberflächenchemie von QDs und ihre Anwendungen (LSC, QD-LEDs und electrohydrodynamic EHD-Jet-Printing), nacheinander eingeführt. Der Schwerpunkt dieser Doktorarbeit liegt hauptsächlich auf der Kombination von QD-Materialien und QD-Bauelementen, basierend auf der Synthese von InP QDs mit einem anorganischen Kern (Kern-Schale-Heterostruktur) und einer organischen Hülle (Oberflächenliganden auf der QD-Oberfläche). In die Kern-Schale-Heterostruktur wird eine ZnCuInS-Mittelschale als Zwischenschicht zwischen einem Cu-dotierten InP Kern und einer ZnS-Schale für LSC-Bauelemente neu eingeführt. Bei den Oberflächenliganden wird der Ligandeneffekt von 1-Oktanthiol und Chloridionen auf die Stabilität von QD-LEDs und die Druckbarkeit mit EHD-Jet-Printing hin untersucht. Dabei erhält der Protonentransfermechanismus auf der QD-Oberfläche ein besonderes Augenmerk. In Kapitel 3 wird die Eintopfsynthese von hocheffizient emittierenden QDs mit einer Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS Kern/Schale/Schale-Heterostruktur beschrieben. Wenn diese neuartige Kombination einer ZCIS/ZnS-Doppelschalenstruktur mit eine Reihe von Cu:InP-Kerne mit unterschiedlichen Größen kombiniert wird, ergeben die daraus entstehenden Cu:InP/ZCIS/ZnS-QDs die bisher höchsten publizierten PL-QYs von 71,5 – 82,4 % im nahen IR-Bereich von 694 – 850 nm mit einstellbarer PL Wellenlänge. Diese Ergebnisse weisen auf die Wirksamkeit der ZCIS-Zwischenschicht hin, welche die Grenzflächenspannung zwischen Kern und Schale effektiv mildert und damit zu einem solch hohen Emissionsvermögen führt. Diese ZCIS-Zwischenschicht wird durch vergleichende Größen-, Struktur- und Zusammensetzungsanalysen weiter untersucht. Am Ende des Kapitels wird der aktuellen Stand der Forschung auf dem Gebiet der LSC-Bauelemente aus solchen Cu:InP/ZCIS/ZnS-QDs vorgestellt. Kapitel 4 befasst sich hauptsächlich mit dem Ligandeneffekt bei der Passivierung mit 1-Oktanthiol von InP/ZnSe/ZnS-QDs im Hinblick auf die unvollständige Oberflächenpassivierung während der Synthese. Es fehlen anionischen Carboxylat-Liganden auf der InP/ZnSe/ZnS-Oberfläche der QDs, an denen Zink Carboxylat Liganden durch Protonentransfer vom 1-Oktanthiol in Carbonsäure-Liganden umgewandelt werden könnten. Die so synthetisierten QDs haben zunächst eine unterkoordinierte Oberfläche mit Leerstellen, die durch Lösungsmittel-Liganden wie Ethanol oder Aceton passiviert werden. Wenn 1-Octanthiol an die QD-Oberfläche bindet bewirkt der Protonentransfer die Bindung von Carboxylat-Liganden (aus Zink-Carboxylat) an die Oberfläche, wobei Ethanol- oder Aceton-Liganden ausgetauscht werden. Systematische Analysen wie Thermogravimetrie (thermogravimetric analysis TGA), Massenspektrometrie (MS) und Protonen-Kernmagnetresonanz (proton nuclear magnetic resonance 1H-NMR) zeigen direkt den Zusammenhang zwischen Oberflächenliganden und QD-LEDs. Kapitel 5 zeigt den Zusammenhang zwischen der Materialstabilität von QDs und der Bauteilstabilität von QD-LEDs durch Untersuchung der Oberflächenchemie und der Schalendicke. In typischen kolloidalen III-V-InP-QDs wird eine anorganische ZnS-Außenhülle auf den InP Kern aufgetragen, um Stabilität zu gewährleisten. In dieser Arbeit wird jedoch eine schnellere Photodegradation von InP/ZnSe/ZnS-QDs mit einer dickeren statt einer dünneren ZnS-Schale gezeigt, wenn 1-Oktanthiol als Schwefelquelle zur Bildung der äußersten ZnS-Schale verwendet wurde. 1-Oktanthiol induziert die Bildung eines schwach gebundenen Carboxylatliganden durch Protonentransfer auf der QD-Oberfläche, was zu einem schnelleren Abbau unter UV-Licht trotz dickerer ZnS-Schale führt. Detailliertere Einblicke in die Oberflächenchemie werden durch 1H-NMR, TGA und MS gewonnen. Überraschenderweise zeigen jedoch die Lebensdauern der aus InP/ZnSe/ZnS-QDs mit dicken oder dünnen ZnS-Hüllen hergestellten EL-Bauelemente eine gegenteilige Stabilität: Die QD-LEDs mit QDs mit dicker ZnS-Hülle haben eine längere Lebensdauer, als jene mit dünner ZnS-Hülle. Es wird der Degradationsmechanismus der QDs und der QD-Leuchtdioden anhand der Ergebnisse erläutert und der Effekt auf die unterschiedlichen Lebensdauern von Material und Bauteil diskutiert. In Kapitel 6 wird eine Methode vorgeschlagen, wie die Druckbarkeit von QD-Tintenformulierungen beim EHD-Jet-Druck über die QD-Materialien verbessert werden kann. Dazu werden InP-QDs mit GaP-Zwischenschalen erweitert, um die Oberflächenladung zu beeinflussen. Darüber hinaus verbessern GaP-Zwischenschalen in III-V kolloidalen InP-QDs deren thermische Stabilität und PL-QY im Falle von Typ-I-Kern/Schale/Schale-Heterostrukturen (InP/GaP/ZnSeS-QDs). Diese stark lumineszierenden InP/GaP/ZnSeS-QDs wurden synthetisiert und für den EHD-Jet-Druck verwendet. Nicht umgesetzte Ga und Cl-Ionen auf der QD-Oberfläche reduzieren die benötigte Betriebsspannung zur Ausbildung eines Taylor-Kegels und eines stabilen Tinten-Jets. Dieses Ergebnis deutet darauf hin, dass die Oberflächenladungen der Quantenpunkte eine wichtige Rolle bei der Ausbildung des Taylor-Kegels spielen. Mittels Zeta-Potenzial-Messung von QD-Tinten wurde eine industriell erprobte und einfache Methode zur Untersuchung der Oberflächenladungen verwendet. Darüber hinaus wurde optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma (inductively coupled plasma-atomic emission spectroscopy ICP-OES) zur Bestimmung der Elementzusammensetzung durchgeführt. Diese Dissertation beschäftigt sich sowohl mit der Synthese von hocheffizienten InP QDs mit schmalbandiger Emission (full width at half maximum FWHM), als auch den Zusammenhängen zwischen QD-Material und QD-Bauelementen. Die Ergebnisse sind einerseits relevant für die breitere industrielle Anwendung dieser Materialien und andererseits für ein tieferes chemisch-physikalisches, theoretisches und experimentelles Verständnis der Prozesse, die zu langlebigen und stabilen Bauelementen führen. KW - colloidal quantum dot KW - Cu doped InP KW - surface chemistry KW - QD stability KW - QD device KW - kolloidaler Quantenpunkt KW - Cu-dotiertes InP KW - Oberflächenchemie KW - QD-Stabilität KW - QD-Gerät Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585351 ER - TY - THES A1 - Imran ul-haq, Muhammad T1 - Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂) T1 - Synthese von Fluorpolymeren in überkritischem Kohlendioxid (scCO₂) N2 - For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol−1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The “livingness” is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol−1·s−1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10−1, 9·10−2 and 2·10−4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 % for DTBP-derived end groups to a maximum of 62 % for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol–1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol–1 and PFHI (C6F13I) - derived end groups. N2 - Erstmalig gelang es, stabilisatorfreie Vinylidenfluorid (VDF)-Polymerisationen in homogener Phase mit überkritischem CO₂ (scCO₂) bis zu vollständigem Monomerumsatz durchzuführen. Die Homogenität während der Polymerisation wurde durch in-line Fourier-Transform Nahinfrarot Spektroskopie beobachtet. Für Polymerisationen bei 140 °C und 1500 bar wurde Di-tert-butylperoxid (DTBP) als Initiator verwendet. Es wurden Polymere mit einem Zahlenmittel der Molmasse kleiner 104 g·mol–1 und Polydispersitäten zwischen 3.1 und 5.7. erhalten. Um isotherme Reaktionen zu ermöglichen, wurden CO₂-Gehalte zwischen 61 und 83 wt.% verwendet. Die für die homogene Reaktionsführung erforderlichen hohen Drücke und Temperaturen haben keinen Einfluss auf die Mikrostruktur des Polymers. Zur Verringerung der Initiatorkonzentration wurden weitere Polymerisationen unter Verwendung von Kettentransferreagenzien (CTA) bei 120 °C und 1500 bar in homogener Phase mit scCO₂ durchgeführt. Perfluoriertes Hexyliodid als CTA ermöglicht kontrollierte radikalische Polymerisationen, wobei Polymere mit geringer Polydispersität zwischen 1.5 und 1.2 erhalten wurden. Endgruppenanalyse mit Elektronenspray-Ionisations-Massen¬spektro¬metrie (ESI-MS) zeigte, dass keine Initiatorendgruppen im Polymer enthalten sind. Diese Beobachtung unterstützt den lebenden Charakter der Polymerisationen und basiert auf einer labilen C-I-Bindung im Polymer. Aufgrund der schwachen C-I-Bindung trägt das perfluorierte Hexyliodid (C6F13I) auch zur Initiierung bei. Polymerisationen in Gegenwart von BrCCl3, C6F13Br und C6F13H zeigten, dass nur C6F13H keinen Beitrag zur Initiierung leistet. Bei 120 °C und 1500 bar wurde ein kp/kt0.5 von ~ 0.64 (L·mol−1·s−1)0.5 bestimmt, wobei kp der Wachstums- und kt der Terminierungsgeschwindigkeitskoeffizient sind. Die Kettentransfer¬konstanten (CT) bei 120°C betragen 8·10−1, 9·10−2 und 2·10−4 für C6F13I, C6F13Br und C6F13H. Die Änderung der CT-Werte lässt sich mit der zunehmenden Bindungsenergie in der Reihe C-I, C-Br und C-H erklären. Die labile C-I-Bindung ermöglicht eine Funktionalisierung des Polymers durch Click-Reaktionen. Nach Substitution der Iodid-Endgruppe durch eine Azidgruppe erfolgte eine katalysatorfreie 1,3-dipolare Cyclaoaddition mit Alkinen zu Polymeren mit 1,2,3-Triazol-Endgruppen. Dieses endfunktionalisierte PVDF besitzt im Vergleich zu konventionellem PVDF eine höhere thermische Stabilität. Nach der Expansion der Polymerisationsmischung mit scCO₂ auf Umgebungsbedingungen lag das Polymer als weißes Pulver vor, das im Hinblick auf z.B. Polymerendgruppen, Kristallinität, Gestalt und Größe der Partikel untersucht wurde. Rasterelektronenmikroskopie zeigte, dass Polymere mit DTBP-Endgruppen zu stapelförmigen Partikeln führen, während bei CTA-Fragmenten als Endgruppen schwamm- oder rosenartige Partikel erhalten wurden. Ergebnisse der FT-IR Spektroskopie und Weitwinkelröntgenbeugung zeigten, dass der höchste Gehalt an β-phasigem Material, der für die Piezoelektrizität des PVDF verantwortlich ist, für PVDF mit Initiatorendgruppen erhalten wurde. DSC (Differential Scanning Calorimetry) Messungen ergaben zudem, dass der Kristallinitätsgrad durch Endgruppen und Polymermasse beeinflusst wird. Die Expansion der homogenen Polymermischung kann als nicht-optimierter RESS-Prozess (Rapid Expanison from Supercritical Solution,) angesehen werden. Aus RESS Experimenten unter kontrollierten Bedingungen wurden jeweils nanoskalige primäre PVDF-Partikel ohne Verwendung von Lösungsmitteln, Tensiden oder anderen Additiven erhalten. Es besteht ein enger Zusammenhang zwischen einerseits der Partikelgröße und der Partikelgrößenverteilung und andererseits der Polymerkonzentration in scCO₂ vor der Expansion, bestimmt durch Polymerendgruppen und Molmassen der eingesetzten Materialien. KW - Synthese KW - Fluorpolymere KW - überkritisches Kohlendioxid (scCO₂) KW - Synthesis KW - fluorinated polymers KW - supercritical carbon dioxide (scCO₂) Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19868 ER - TY - THES A1 - Zhang, Shuhao T1 - Synthesis and self-assembly of protein-polymer conjugates for the preparation of biocatalytically active membranes T1 - Synthese und Selbstassemblierung von Protein/Polymer-Konjugaten für die Herstellung einer biokatalytisch aktiven Membran N2 - This thesis covers the synthesis of conjugates of 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) with suitable polymers and the subsequent immobilization of these conjugates in thin films via two different approaches. 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. Conjugation and immobilization renders the enzyme applicable for utilization in a continuously run biocatalytic process which avoids the common problem of product inhibition. Within this thesis, conjugates of DERA and poly(N-isopropylacrylamide) (PNIPAm) for immobilization via a self-assembly approach were synthesized and isolated, as well as conjugates with poly(N,N-dimethylacrylamide) (PDMAA) for a simplified and scalable spray-coating approach. For the DERA/PNIPAm-conjugates different synthesis routes were tested, including grafting-from and grafting-to, both being common methods for the conjugation. Furthermore, both lysines and cysteines were addressed for the conjugation in order to find optimum conjugation conditions. It turned out that conjugation via lysine causes severe activity loss as one lysine plays a key role in the catalyzing mechanism. The conjugation via the cysteines by a grafting-to approach using pyridyl disulfide (PDS) end-group functionalized polymers led to high conjugation efficiencies in the presence of polymer solubilizing NaSCN. The resulting conjugates maintained enzymatic activity and also gained high acetaldehyde tolerance which is necessary for their use later on in an industrial relevant process after their immobilization. The resulting DERA/PNIPAm conjugates exhibited enhanced interfacial activity at the air/water interface compared to the single components, which is an important pre-requisite for the immobilization via the self-assembly approach. Conjugates with longer polymer chains formed homogeneous films on silicon wafers and glass slides while the ones with short chains could only form isolated aggregates. On top of that, long chain conjugates showed better activity maintenance upon the immobilization. The crosslinking of conjugates, as well as their fixation on the support materials, are important for the mechanical stability of the films obtained from the self-assembly process. Therefore, in a second step, we introduced the UV-crosslinkable monomer DMMIBA to the PNIPAm polymers to be used for conjugation. The introduction of DMMIBA reduced the lower critical solution temperature (LCST) of the polymer and thus the water solubility at ambient conditions, resulting in lower conjugation efficiencies and in turn slightly poorer acetaldehyde tolerance of the resulting conjugates. Unlike the DERA/PNIPAm, the conjugates from the copolymer P(NIPAM-co-DMMIBA) formed continuous, homogenous films only after the crosslinking step via UV-treatment. For a firm binding of the crosslinked films, a functionalization protocol for the model support material cyclic olefin copolymer (COC) and the final target support, PAN based membranes, was developed that introduces analogue UV-reactive groups to the support surface. The conjugates immobilized on the modified COC films maintained enzymatic activity and showed good mechanical stability after several cycles of activity assessment. Conjugates with longer polymer chains, however, showed a higher degree of crosslinking after the UV-treatment leading to a pronounced loss of activity. A porous PAN membrane onto which the conjugates were immobilized as well, was finally transferred to a dead end filtration membrane module to catalyze the aldol reaction of the industrially relevant mixture of acetaldehyde and hexanal in a continuous mode. Mono aldol product was detectable, but yields were comparably low and the operational stability needs to be further improved Another approach towards immobilization of DERA conjugates that was followed, was to generate the conjugates in situ by simply mixing enzyme and polymer and spray coat the mixture onto the membrane support. Compared to the previous approach, the focus was more put on simplicity and a possible scalability of the immobilization. Conjugates were thus only generated in-situ and not further isolated and characterized. For the conjugation, PDMAA equipped with N-2-thiolactone acrylamide (TlaAm) side chains was used, an amine-reactive comonomer that can react with the lysine residues of DERA, as well as with amino groups introduced to a desired support surface. Furthermore disulfide formation after hydrolysis of the Tla groups causes a crosslinking effect. The synthesized copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm)) thus serves a multiple purpose including protein binding, crosslinking and binding to support materials. The mixture of DERA and polymer could be immobilized on the PAN support by spray-coating under partial maintenance of enzymatic activity. To improve the acetaldehyde tolerance, the polymer in used was further equipped with cysteine reactive PDS end-groups that had been used for the conjugation as described in the first part of the thesis. The generated conjugates indeed showed good acetaldehyde tolerance and were thus used to be coated onto PAN membrane supports. Post treatment with a basic aqueous solution of H2O2 was supposed to further crosslink the spray-coated film hydrolysis and oxidation of the thiolactone groups. However, a washing off of the material was observed. Optimization is thus still necessary. N2 - Die vorliegende Arbeit beschreibt die Synthese von Konjugaten aus 2-Deoxy-D-ribose-5-phosphat aldolase (DERA) und geeigneten Polymeren sowie deren nachfolgende Immobilisierung in dünnen Filmen mittels zwei verschiedener Herangehensweisen. DERA ist ein Biokatalysator, der in der Lage ist, Acetaldehyd mit einem weiteren Aldehyd zu enantiomerenreinen Mono- und Dihydroxyaldehyden zu verknüpfen. Diese Verbindungen sind wichtige Strukturmotive für eine Reihe von pharmazeutisch aktiven Verbindungen. Konjugation und Immobilisierung machen das Enzym nutzbar für den Einsatz in einem kontinuierlich betriebenen, biokatalytischen Prozess, welcher das bekannte Problem der Produktinhibierung umgeht. In der vorliegenden Arbeit wurden einerseits Konjugate aus DERA und Poly(N-isopropylacrylamid) (PNIPAm) für die Immobilisierung mittels eines Selbstassemblierungsverfahrens synthetisiert und isoliert, sowie andererseits entsprechende Konjugate mit Poly(N,N-dimethylacrylamid) (PDMAA) für ein vereinfachtes und skalierbares Immobilisierungsverfahren mittels Sprühauftrag hergestellt. Für die DERA/PNIPAm-Konjugate wurden verschiedene Syntheserouten getestet, einschließlich grafting-from und grafting-to. Beide Methoden werden standardmäßig für entsprechende Konjugationen eingesetzt. Weiterhin wurden sowohl die Lysine als auch die Cysteine des Enzyms für die Konjugation herangezogen, um optimale Konjugationsbedingungen zu finden. Konjugation über die Lysine verursachte deutliche Aktivitätsverluste, da ein Lysin auch die Schlüsselrolle im katalytischen Mechanismus des Enzyms spielt. Die Konjugation über die Cysteine sowie einen grafting-to-Ansatz unter Nutzung eines entsprechenden Polymers mit cysteinreaktiver Pyridyldisulfid-Endgruppe (PDS) führte zu einer hohen Konjugationseffizienz, sofern polymersolubilisierendes NaSCN eingesetzt wurde. Die resultierenden Konjugate behielten ihre enzymatische Aktivität bei deutlich gesteigerter Toleranz gegenüber Acetaldehyd. Beide Aspekte sind wichtig für den Einsatz des Enzyms in einem industriell relevanten Prozess nach dem Immobilisierungsschritt. Die DERA/PNIPAm-Konjugate zeigten eine erhöhte Oberflächenaktivität im Vergleich zu den Einzelkomponenten, was eine wichtige Voraussetzung für die Immobilisierung über eine Selbstassemblierung darstellt. Konjugate mit relativ langen Polymerketten bildeten nach dem Selbstassemblierungsschritt homogene Filme auf Silizium-Wafern und Glass-Objektträgern während Konjugate mit kurzen Ketten nur isolierte Aggregate bildeten. Darüber hinaus zeigten die Konjugate mit längeren Ketten einen besseren Erhalt der Enzymaktivität im Zuge der Immobilisierung. Die nachträgliche Vernetzung der Konjugate, sowie ihre feste Anbindung an die Trägermaterialien sind wichtige Voraussetzungen für die mechanische Stabilität des aus dem Selbstassemblierungsschritt erhaltenen Films. Aus diesem Grund wurde in einem zweiten Schritt das UV-vernetzbare Monomer DMMIBA in das für die Konjugation vorgesehene, PNIPAm-basierte Polymer eingeführt. Die Einbindung von DMMIBA setzte die untere kritische Lösungstemperatur (LCST) und damit die Löslichkeit des Polymers in Wasser bei Raumtemperatur herab. Dies führte zu niedrigeren Konjugationseffizienzen und damit zu einer etwas schlechteren Acetaldehydtoleranz der resultierenden Konjugate. Anders als im Fall von DERA/PNIPAm, bildeten die mit P(NIPAM-co-DMMIBA) synthetisierten Konjugate einen homogenen Film nur nach Vernetzung mittels UV-Behandlung aus. Für eine feste Anbindung des vernetzten Films wurde ein Funktionalisierungsprotokoll für das Modell-Trägermaterial aus cycloolefinischem Copolymer (COC) und das letztliche Zielmaterial, PAN-basierte Membranen, entwickelt, welches analoge UV-reaktive Gruppen auf der Trägeroberfläche erzeugt. Die auf COC immobilisierten Konjugate bewahrten ihre Enzymaktivität und zeigten eine gute mechanische Stabilität nach mehreren Aktivitäts-Messzyklen. Der Einsatz von Konjugaten mit längeren Polymerketten führte jedoch zu Filmen mit zu hohem Vernetzungsgrad was einen deutlichen Aktivitätsverlust bedingte. Eine poröse, PAN-basierte Membran, auf welcher die Konjugate ebenso immobilisiert wurden, wurde schlussendlich in ein Dead-End-Filtrationsmodul überführt, um die Aldolreaktion eines industriell relevanten Gemisches aus Acetaldehyd und Hexanal in einem kontinuierlich betriebenen Verfahren durchzuführen. Es konnte Monoaldolprodukt detektiert werden, jedoch waren die Ausbeuten vergleichsweise niedrig, während sich die operative Stabilität als verbesserungswürdig erwies. Ein weiterer Immobilisierungsansatz für DERA-Konjugate, beinhaltete die in-situ-Generierung der Konjugate durch einfaches Vermischen von Enzym und Polymer gefolgt von unmittelbaren Auftrag des Materials auf ein Membranträgermaterial mittels Sprühen. Im Vergleich zum ersten Ansatz lag der Fokus hier mehr auf der Einfachheit und prinzipiellen Skalierbarkeit der Immobilisierung. Daher wurden die Konjugate hier nur in-situ erzeugt und nicht weiter isoliert sowie charakterisiert. Für die Konjugation wurde PDMAA herangezogen, welches mit Thiolactongruppen entlang der Seitenkette ausgerüstet ist. Die Thiolactongruppen sind reaktiv gegenüber Aminen und können daher sowohl mit den Lysineinheiten der DERA reagieren als auch mit Aminogruppen, die im Vorfeld auf dem Trägermaterial erzeugt wurden. Darüber hinaus können durch Hydrolyse der Thiolactoneinheiten sowie anschließender Ausbildung von Disulfidbrücken Vernetzungspunkte erzeugt werden. Das hergestellte Copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm) übernimmt daher mehrere Aufgaben einschließlich Proteinbindung, Vernetzung und Anbindung an das Trägermaterial. Mischungen aus DERA und Polymer konnten durch Sprühauftrag auf funktionalisierten PAN-Trägermaterialien unter teilweisem Erhalt der Enzymaktivität immobilisiert werden. Um auch hier die Acetaldehydtoleranz zu verbessern, wurde das Polymer in einem zweiten Schritt wieder mit PDS-Endgruppen ausgerüstet, die schon zuvor im ersten Teil der Arbeit für die Konjugatsynthese mittels grafting-to herangezogen wurden. Die hergestellten Konjugate zeigten eine gute Acetaldehydtoleranz und wurden daher verwendet, um PAN-Membranen zu beschichten. Eine Nachbehandlung mittels einer basischen Wasserstoffperoxidlösung sollte den aufgesprühten Film vernetzen. Im Ergebnis wurde jedoch ein großer Teil des aufgebrachten Materials im Zuge dieses Schritts heruntergewaschen. Eine weitere Optimierung dieses Schritts ist daher noch notwendig. KW - 2-deoxy-D-ribose-5-phoshphate aldolase KW - enzyme immobilization KW - enzymatically active membrane KW - enzyme/polymer conjugate KW - self-assembly Y1 - 2019 ER - TY - THES A1 - Milke, Bettina T1 - Synthese von Metallnitrid- und Metalloxinitridnanopartikeln für energierelevante Anwendungen T1 - Synthesis of metal nitride and metal oxynitride nanoparticles for energy related applications N2 - Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind. N2 - The development of new methods toward alternative clean energy production and efficient energy storage is a hot topic nowadays. In this context nanoscience has an important role to find suitable ways of increasing the efficiency of storage and production of energy of already known materials and new materials. However, until now the most well-known syntheses of MnN0,43 and Zr2ON2 nanoparticles lead to undefined particles. A simple, cheap and safe synthesis would offer the possibility of broader applications and scalability. We herein present the so-called urea-glass route which is used as a sol-gel process. This synthetic route leads to well-defined particle sizes, novel particle morphologies and allows the tailoring of the desired products. In the case of the synthesis of manganese nitride nanoparticles (MnN0,43), nanoparticles with a core-shell structure are obtained, their use as conversion materials in batteries is first introduced. On the other hand, the formation of zirconium oxynitride nanoparticles (Zr2ON2) can be easily influenced by varying the reaction conditions such as the amount of urea or the reaction temperature. The addition of small amounts of salt prevents the formation of carbon in the final product, leading to yellow Zr2ON2 nanoparticles with a size of d = 8 nm which show semiconductor behavior. KW - Nitride KW - Oxinitride KW - Nano KW - Li-Batterien KW - Harnstoff-Glas-Route KW - Nitrides KW - Oxynitrides KW - Nano KW - Li-batteries KW - Urea-Glas-Route Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60008 ER - TY - THES A1 - Chaleawlert-Umpon, Saowaluk T1 - Sustainable electrode materials based on lignin T1 - Ligninbasierte nachhaltige Elektrodenmaterialien N2 - The utilization of lignin as renewable electrode material for electrochemical energy storage is a sustainable approach for future batteries and supercapacitors. The composite electrode was fabricated from Kraft lignin and conductive carbon and the charge storage contribution was determined in terms of electrical double layer (EDL) and redox reactions. The important factors at play for achieving high faradaic charge storage capacity contribute to high surface area, accessibility of redox sites in lignin and their interaction with conductive additives. A thinner layer of lignin covering the high surface area of carbon facilitates the electron transfer process with a shorter pathway from the active sites of nonconductive lignin to the current collector leading to the improvement of faradaic charge storage capacity. Composite electrodes from lignin and carbon would be even more sustainable if the fluorinated binder can be omitted. A new route to fabricate a binder-free composite electrode from Kraft lignin and high surface area carbon has been proposed by crosslinking lignin with glyoxal. A high molecular weight of lignin is obtained to enhance both electroactivity and binder capability in composite electrodes. The order of the processing step of crosslinking lignin on the composite electrode plays a crucial role in achieving a stable electrode and high charge storage capacity. The crosslinked lignin based electrodes are promising since they allow for more stable, sustainable, halogen-free and environmentally benign devices for energy storage applications. Furthermore, improvement of the amount of redox active groups (quinone groups) in lignin is useful to enhance the capacity in lithium battery applications. Direct oxidative demethylation by cerium ammonium nitrate has been carried out under mild conditions. This proves that an increase of quinone groups is able to enhance the performance of lithium battery. Thus, lignin is a promising material and could be a good candidate for application in sustainable energy storage devices. N2 - Die Verwendung von Lignin als erneuerbares Ausgangsmaterial für Elektroden ist ein nachhaltiger Ansatz für die Herstellung der nächsten Generation von Batterien und Superkondensatoren. In dieser Arbeit werden Verbundelektroden auf der Basis von Kraft-Lignin und leitfähigem Kohlenstoff hergestellt und getestet. Die Beiträge des Aufbaus einer elektrischen Doppelschicht (EDL) und der Redoxreaktionen zur Kapazität der Elektrode werden diskutiert. Die wichtigsten Faktoren um eine hohe faradaysche Kapazität der aktiven Gruppen in Lignin zu erreichen sind eine große Oberfläche, die Zugänglichkeit der redoxaktiven Gruppen, sowie die Wechselwirkung mit leitfähigen Additiven. Dabei verringert eine dünnere Ligninschicht auf der Oberfläche des leitfähigen Kohlenstoffs den Elektronentransportweg zwischen den redoxaktiven Gruppen und dem Stromabnehmer und wirkt sich somit positiv auf die faradaysche Kapazität aus. Traditionelle Verbundelektroden enthalten in der Regel fluorierte Bindemittel, was deren Nachhaltigkeit in Frage stellt. Die Verwendung von Glyoxal als Quervernetzer für Lignin stellt eine Alternative zur Herstellung von bindemittelfreien ligninbasierten Verbundelektroden dar. Durch die Quervernetzung wird Lignin mit hohem Molekulargewicht erhalten, was sich insbesondere vorteilhaft auf die Stabilität der Elektroden auswirkt. Für das Erreichen einer hohen Kapazität spielt allerdings die Reihenfolge der Produktionsschritte eine entscheidende Rolle, was hier auch diskutiert wird. Eine Erhöhung der Anzahl an redoxativen Gruppen, insbesondere Chinon-Funktionalitäten, im Lignin führt darüber hinaus zur Erhöhung der Kapazität in primären Lithiumbatterien. Die direkte oxidative Demethylierung von Phenylethern mit Hilfe von Cerammoniumnitrat wurde in dieser Arbeit unter milden Reaktionsbedingungen durchgeführt und die verbesserte Kapazität in Lithiumbatterien aufgrund der erhöhten Anzahl an redoxaktiven Gruppen aufgezeigt. Abschließend kann Lignin, quervernetzt oder oxidiert, als vielversprechender Wegbereiter für nachhaltige Materialen in der Energiespeicherung angesehen werden. KW - lignin KW - energy storage KW - sustainable energy storage materials KW - Lignin KW - Energiespeicher KW - nachhaltige Energiespeichermaterialien Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411793 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Gressel, Oliver T1 - Supernova-driven turbulence and magnetic field amplification in disk galaxies T1 - Supernovagetriebene Turbulenz und Magnetfeldverstärkung in Scheibengalaxien N2 - Supernovae are known to be the dominant energy source for driving turbulence in the interstellar medium. Yet, their effect on magnetic field amplification in spiral galaxies is still poorly understood. Analytical models based on the uncorrelated-ensemble approach predicted that any created field will be expelled from the disk before a significant amplification can occur. By means of direct simulations of supernova-driven turbulence, we demonstrate that this is not the case. Accounting for vertical stratification and galactic differential rotation, we find an exponential amplification of the mean field on timescales of 100Myr. The self-consistent numerical verification of such a “fast dynamo” is highly beneficial in explaining the observed strong magnetic fields in young galaxies. We, furthermore, highlight the importance of rotation in the generation of helicity by showing that a similar mechanism based on Cartesian shear does not lead to a sustained amplification of the mean magnetic field. This finding impressively confirms the classical picture of a dynamo based on cyclonic turbulence. N2 - Supernovae sind bekanntermaßen die dominante treibende Energiequelle für Turbulenz im interstellaren Medium. Dennoch ist ihre Auswirkung auf die Verstärkung von Magnetfeldern in Spiralgalaxien weitestgehend unverstanden. Analytische Modelle, die auf der Annahme eines unkorrelierten Ensembles beruhen, sagen voraus, dass das erzeugte Feld aus der galaktischen Scheibe herausgedrängt wird bevor eine substantielle Verstärkung erfolgen kann. Mithilfe numerischer Simulationen supernovagetriebener Turbulenz zeigen wir, dass dies nicht der Fall ist. Unter Berücksichtigung einer vertikalen Schichtung und differentieller galaktischer Rotation beobachten wir eine exponentielle Verstärkung des mittleren Magnetfeldes auf einer Zeitskala von 100 Mio. Jahren. Diese selbstkonsistente numerische Bestätigung eines “schnellen Dynamos” erlaubt es, die beobachteten starken Magnetfelder in jungen Galaxien zu erklären. Darüberhinaus stellen wir die Wichtigkeit der Rotation bei der Erzeugung von Helizität heraus, indem wir zeigen, dass ein ähnlicher Effekt basierend auf kartesischer Scherung nicht zu einer Verstärkung des mittleren Magnetfeldes führt. Dies bestätigt eindrucksvoll das klassische Bild zyklonischer Turbulenz. KW - Turbulenz KW - Magnetfelder KW - Magnetohydrodynamik KW - Supernovaüberreste KW - Galaxien KW - turbulence KW - magnetic fields KW - magnetohydrodynamics KW - supernova remnants KW - galaxies Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29094 ER - TY - THES A1 - Scholz, Markus Reiner T1 - Spin polarization, circular dichroism, and robustness of topological surface states T1 - Spinpolarisation, Zirkulardichroismus und Robustheit Topologischer Oberflächenzustände BT - a photoemission study BT - eine Photoemissionsstudie N2 - Dreidimensionale topologische Isolatoren sind ein neues Materialsystem, welches dadurch charakterisiert ist, dass es in seinem Inneren isolierend an der Ober äche jedoch leitend ist. Ursächlich für die Leitfähigkeit an der Ober äche sind sogenannte topologische Ober- ächenzustände, welche das Valenzband des Inneren mit dem Leitungsband des Inneren verbinden. An der Ober äche ist also die Bandlücke, welche die isolierende Eigenschaft verursacht, geschlossen. Die vorliegende Arbeit untersucht diese Ober ächenzustände mittels spin- und winkelauf- gelöster Photoemissionsspektroskopie. Es wird gezeigt, dass in den Materialien Bi2Se3 und Bi2Te3, in übereinstimmung mit der Literatur, die entscheidenden Charakteristika eines topologischen Ober ächenzustands vorzu nden sind: Die Ober ächenzustände dieser Sys- teme durchqueren die Bandlücke in ungerader Anzahl, sie sind nicht entartet und weisen folgerichtig eine hohe Spinpolarisation auf. Weiterhin wird durch Aufdampfen diverser Adsorbate gezeigt, dass der Ober ächenzustän- de von Bi2Se3 und Bi2Te3, wie erwartet, extrem robust ist. Ober ächenzustände topologisch trivialer Systeme erfüllen diese Eigenschaft nicht; bereits kleine Verunreinigungen kön- nen diese Zustände zerstören, bzw. die Ober äche isolierend machen. Die topologischen Ober ächenzustände können in der vorliegenden Arbeit noch bis zur Detektionsgrenze der experimentellen Messmethode nachgewiesen werden und die Ober äche bleibt Leitfähig. Unter den Adsorbaten be ndet sich auch Eisen, ein bekanntermaßen magnetisches Materi- al. Eine der Grundvoraussetzungen für topologische Isolatoren ist die Zeitumkehrsymme- trie, die Elektronen, welche den topologischen Ober ächenzustand besetzen, vorschreibt, dass sie eine bestimmte Spinrichtung haben müssen, wenn sie sich beispielsweise nach links bewegen und den entgegengesetzten Spin wenn sie sich nach rechts bewegen. In magnetischen Materialien ist die Zeitumkehrsymmetrie jedoch explizit gebrochen und die gezeigte Robustheit des Ober ächenzustands gegen magnetische Materialien daher uner- wartet. Die Zeitumkehrsymmetrie sorgt auch dafür, dass eine Streuung der Elektronen um 180°, beispielsweise an einem Gitterdefekt oder an einem Phonon strikt verboten ist. Bei einem solchen Streuprozess bleibt die Spinrichtung erhalten, da aber in der Gegenrichtung nur Zustände mit entgegengesetztem Spin vorhanden sind kann das Elektron nicht in diese Richtung gestreut werden. Dieses Prinzip wird anhand der Lebensdauer der durch Pho- toemission angeregten Zustände untersucht. Hierbei wird gezeigt, dass die Kopplung der Elektronen des Ober ächenzustands von Bi2Te3 an Phononen unerwartet hoch ist und dass sich eine Anisotropie in der Bandstruktur des Selbigen auch in den Lebensdauern der ange- regten Zustände widerspiegelt. Weiterhin wird gezeigt, dass sich die Ein üsse von magne- tischen und nicht-magnetischen Verunreinigungen auf die Lebensdauern stark voneinander unterscheiden. Im letzten Teil der vorliegenden Arbeit wird untersucht, ob eine Asymmetrie in der Inten- sitätsverteilung der winkelaufgelösten Photoemissionsspektren, bei Anregung mit zirku- lar polarisiertem Licht, in Bi2Te3 Rückschlüsse auf die Spinpolarisation der Elektronen erlaubt. Bei Variation der Energie des eingestrahlten Lichts wird ein Vorzeichenwechsel der Asymmetrie beobachtet. Daraus lässt sich schlussfolgern, dass die Asymmetrie keine Rückschlüsse auf die Spinpolarisation erlaubt. N2 - This thesis is focussed on the electronic properties of the new material class named topological insulators. Spin and angle resolved photoelectron spectroscopy have been applied to reveal several unique properties of the surface state of these materials. The first part of this thesis introduces the methodical background of these quite established experimental techniques. In the following chapter, the theoretical concept of topological insulators is introduced. Starting from the prominent example of the quantum Hall effect, the application of topological invariants to classify material systems is illuminated. It is explained how, in presence of time reversal symmetry, which is broken in the quantum Hall phase, strong spin orbit coupling can drive a system into a topologically non trivial phase. The prediction of the spin quantum Hall effect in two dimensional insulators an the generalization to the three dimensional case of topological insulators is reviewed together with the first experimental realization of a three dimensional topological insulator in the Bi1-xSbx alloys given in the literature. The experimental part starts with the introduction of the Bi2X3 (X=Se, Te) family of materials. Recent theoretical predictions and experimental findings on the bulk and surface electronic structure of these materials are introduced in close discussion to our own experimental results. Furthermore, it is revealed, that the topological surface state of Bi2Te3 shares its orbital symmetry with the bulk valence band and the observation of a temperature induced shift of the chemical potential is to a high probability unmasked as a doping effect due to residual gas adsorption. The surface state of Bi2Te3 is found to be highly spin polarized with a polarization value of about 70% in a macroscopic area, while in Bi2Se3 the polarization appears reduced, not exceeding 50%. We, however, argue that the polarization is most likely only extrinsically limited in terms of the finite angular resolution and the lacking detectability of the out of plane component of the electron spin. A further argument is based on the reduced surface quality of the single crystals after cleavage and, for Bi2Se3 a sensitivity of the electronic structure to photon exposure. We probe the robustness of the topological surface state in Bi2X3 against surface impurities in Chapter 5. This robustness is provided through the protection by the time reversal symmetry. Silver, deposited on the (111) surface of Bi2Se3 leads to a strong electron doping but the surface state is observed up to a deposited Ag mass equivalent to one atomic monolayer. The opposite sign of doping, i.e., hole-like, is observed by exposing oxygen to Bi2Te3. But while the n-type shift of Ag on Bi2Se3 appears to be more or less rigid, O2 is lifting the Dirac point of the topological surface state in Bi2Te3 out of the valence band minimum at $\Gamma$. After increasing the oxygen dose further, it is possible to shift the Dirac point to the Fermi level, while the valence band stays well beyond. The effect is found reversible, by warming up the samples which is interpreted in terms of physisorption of O2. For magnetic impurities, i.e., Fe, we find a similar behavior as for the case of Ag in both Bi2Se3 and Bi2Te3. However, in that case the robustness is unexpected, since magnetic impurities are capable to break time reversal symmetry which should introduce a gap in the surface state at the Dirac point which in turn removes the protection. We argue, that the fact that the surface state shows no gap must be attributed to a missing magnetization of the Fe overlayer. In Bi2Te3 we are able to observe the surface state for deposited iron mass equivalents in the monolayer regime. Furthermore, we gain control over the sign of doping through the sample temperature during deposition. Chapter6 is devoted to the lifetime broadening of the photoemission signal from the topological surface states of Bi2Se3 and Bi2Te3. It is revealed that the hexagonal warping of the surface state in Bi2Te3 introduces an anisotropy for electrons traveling along the two distinct high symmetry directions of the surface Brillouin zone, i.e., $\Gamma$K and $\Gamma$M. We show that the phonon coupling strength to the surface electrons in Bi2Te3 is in nice agreement with the theoretical prediction but, nevertheless, higher than one may expect. We argue that the electron-phonon coupling is one of the main contributions to the decay of photoholes but the relatively small size of the Fermi surface limits the number of phonon modes that may scatter off electrons. This effect is manifested in the energy dependence of the imaginary part of the electron self energy of the surface state which shows a decay to higher binding energies in contrast to the monotonic increase proportional to E$^2$ in the Fermi liquid theory due to electron-electron interaction. Furthermore, the effect of the surface impurities of Chapter 5 on the quasiparticle life- times is investigated. We find that Fe impurities have a much stronger influence on the lifetimes as compared to Ag. Moreover, we find that the influence is stronger independently of the sign of the doping. We argue that this observation suggests a minor contribution of the warping on increased scattering rates in contrast to current belief. This is additionally confirmed by the observation that the scattering rates increase further with increasing silver amount while the doping stays constant and by the fact that clean Bi2Se3 and Bi2Te3 show very similar scattering rates regardless of the much stronger warping in Bi2Te3. In the last chapter we report on a strong circular dichroism in the angle distribution of the photoemission signal of the surface state of Bi2Te3. We show that the color pattern obtained by calculating the difference between photoemission intensities measured with opposite photon helicity reflects the pattern expected for the spin polarization. However, we find a strong influence on strength and even sign of the effect when varying the photon energy. The sign change is qualitatively confirmed by means of one-step photoemission calculations conducted by our collaborators from the LMU München, while the calculated spin polarization is found to be independent of the excitation energy. Experiment and theory together unambiguously uncover the dichroism in these systems as a final state effect and the question in the title of the chapter has to be negated: Circular dichroism in the angle distribution is not a new spin sensitive technique. KW - topological insulators KW - angle resolved photoelectron spectroscopy KW - spin resolved photoelectron spectroscopy KW - Bi2Se3 KW - Bi2Te3 KW - quasiparticle interactions KW - circular dichroism KW - spin-orbit coupling KW - time reversal symmetry KW - surface states KW - Spinpolarisation KW - Zirkulardichroismus KW - topologische Isolatoren KW - Oberflächenzustände KW - winkelaufgelöste Photoelektronenspektroskopie KW - spinaufgelöste Photoelektronenspektroskopie KW - Magnetismus KW - Bi2Te3 KW - Bi2Se3 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96686 ER - TY - THES A1 - Schröder, Birgit Eva T1 - Spatial and temporal dynamics of the terrestrial carbon cycle : assimilation of two decades of optical satellite data into a process-based global vegetation model T1 - Räumliche und zeitliche Dynamik des terrestrischen Kohlenstoffhaushaltes anhand der Assimilation von 20 Jahren optischer Satellitendaten in ein prozessbasiertes dynamisches globales Vegetationsmodell (DGVM) N2 - This PhD thesis presents the spatio-temporal distribution of terrestrial carbon fluxes for the time period of 1982 to 2002 simulated by a combination of the process-based dynamic global vegetation model LPJ and a 21-year time series of global AVHRR-fPAR data (fPAR – fraction of photosynthetically active radiation). Assimilation of the satellite data into the model allows improved simulations of carbon fluxes on global as well as on regional scales. As it is based on observed data and includes agricultural regions, the model combined with satellite data produces more realistic carbon fluxes of net primary production (NPP), soil respiration, carbon released by fire and the net land-atmosphere flux than the potential vegetation model. It also produces a good fit to the interannual variability of the CO2 growth rate. Compared to the original model, the model with satellite data constraint produces generally smaller carbon fluxes than the purely climate-based stand-alone simulation of potential natural vegetation, now comparing better to literature estimates. The lower net fluxes are a result of a combination of several effects: reduction in vegetation cover, consideration of human influence and agricultural areas, an improved seasonality, changes in vegetation distribution and species composition. This study presents a way to assess terrestrial carbon fluxes and elucidates the processes contributing to interannual variability of the terrestrial carbon exchange. Process-based terrestrial modelling and satellite-observed vegetation data are successfully combined to improve estimates of vegetation carbon fluxes and stocks. As net ecosystem exchange is the most interesting and most sensitive factor in carbon cycle modelling and highly uncertain, the presented results complementary contribute to the current knowledge, supporting the understanding of the terrestrial carbon budget. N2 - In der vorliegenden Arbeit wird anhand der Kombination eines dynamischen globalen Vegetationsmodells mit einer Zeitreihe von 21 Jahren optischer Satellitendaten eine realistische Abschätzung der terrestrischen Quellen und Senken von CO2 ermöglicht. Grundlage des hier vorgestellten neuen Modells stellt das dynamische globale Vegetationsmodell LPJ dar, ein prozessorientiertes Vegetationsmodell, das basierend auf ökophysiologischen Grundlagen die Vegetationsverteilung und -dynamik, Störungen (z.B. Feuer) und den Kohlenstoff- sowie den Wasserkreislauf modelliert. Die Kopplung des LPJ-DGVM erfolgte mit einer Zeitreihe globaler AVHRR-fPAR Daten (fPAR – Anteil photosynthetisch aktiver Strahlung), für den Zeitraum 1982 bis 2002 in einer räumlichen Auflösung von 0.5°. Als Ergebnis liegt nun eine globale raum-zeitliche Verteilung aller relevanten Kohlenstoffflüsse vor: Nettoprimärproduktion, Bodenrespiration, Nettoökosystemproduktion, durch Feuer und Ernte emittierter Kohlenstoff, sowie der in Biomasse und Boden gespeicherte Kohlenstoff. Verglichen mit dem Originalmodell haben sich durch die Einspeisung der Satellitendaten alle relevanten Kohlenstoffkomponenten verringert und zeigen nun bessere Übereinstimmung mit Literaturwerten. Die geringeren Kohlenstoffflüsse resultieren aus einer Kombination verschiedener Effekte: geringere Vegetationsbedeckung, Berücksichtigung der landwirtschaftlichen Nutzfläche, realistischere Abbildung der Saisonalität, Veränderung der Vegetationsverteilung und Verschiebung der Artenzusammensetzung. Die globalen Kohlenstoffflüsse werden mit dem vorgestellten Modell realistischer abgebildet als mit Ansätzen, die nur die potentiell natürliche Vegetation simulieren. Insbesondere die Quellen- und Senkendynamik unterliegt vielfältigen Prozessen, die mit einem Modell, dass auch die Bodenrespiration prozessorientiert berücksichtigt, verlässlich geschätzt wird. KW - Vegetationsmodell KW - Kohlenstoffmodell KW - DGVM KW - LPJ KW - Kohlenstoffhaushalt KW - vegetation model KW - carbon cycle KW - DGVM KW - LPJ KW - global change Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17596 ER - TY - THES A1 - Gürtler, Christine T1 - Soziale Ungleichheit unter Kindern : über die Rolle von Kind- und Elternhausmerkmalen für die Akzeptanz und den Einfluss eines Kindes in seiner Schulklasse T1 - Social Inequality among children : the role of child- and parental attributes for the acceptance and the influence of children in their school-classes N2 - Ziel der Studie war die Untersuchung individueller und familialer Faktoren für den sozialen Status eines Kindes in seiner Schulklasse. Durch die Unterscheidung von Akzeptanz und Einfluss als zweier Hauptdimensionen des sozialen Status konnte die Arbeit aufklären, welche Rolle verschiedene Attribute für das Erreichen von Akzeptanz oder Einfluss spielen. 234 Dritt- und Fünftklässler aus Berliner Grundschulen erhielten soziometrische Maße, durch welche der soziale Status erhoben wurde (Akzeptanz und Einfluss). Individuelle und familiale Faktoren wurden mittels Peernominationen über das Verhalten der Kinder (Fremdurteil), Schulnoten (Lehrerangabe)und Maße des sozio-ökonomischen Status der Eltern (Elternangabe)erhoben. Die Ergebnisse zeigen, dass Akzeptanz positiv mit prosozialem und negativ mit aggressivem Verhalten eines Kindes assoziiert ist. Die Zusammenhänge dieser Verhaltensweisen mit Einfluss wiesen in dieselbe Richtung, waren aber deutlich geringer. Ideenreichtum und Humor hingen mit Akzeptanz und Einfluss gleichermaßen positiv zusammen, sowie Traurigsein gleichermaßen negativ mit beiden Statusdimensionen verbunden war. Das Verhalten eines Kindes vermittelte den Zusammenhang zwischen Merkmalen wie Geschlecht, relativem Alter, Schulnoten und der Akzeptanz und dem Einfluss eines Kindes. Zum Beispiel war die positive Beziehung zwischen Schulnoten und dem sozialen Status überwiegend auf die mit(guten)Schulnoten assoziierten Verhaltensweisen Prosozialität und (geringe) Aggressivität zurückzuführen. Die größere Akzeptanz von Mädchen ließ sich ebenso durch deren größere Prosozialität und geringere Aggressivität erklären. Jungen waren im Hinblick auf ihren Einfluss sowohl am oberen als auch am unteren Ende der Hierarchie überrepräsentiert. Sowohl sehr einflussreiche als auch einflusslose Jungen zeichneten sich durch eine erhöhte Aggressivität aus. Komplexere Analysen wiesen daraufhin, dass Jungen negative Auswirkungen von aggressivem Verhalten durch Humor und Ideenreichtum auf ihren Status kompensieren konnten. Der moderate Zusammenhang zwischen dem elterlichen sozioökonomischen Status und dem sozialen Status des Kindes wurde vollständig durch das Verhalten des Kindes mediiert. Das Elternhaus war wichtiger für die Akzeptanz als für den Einfluss eines Kindes. Kinder mit Migrationshintergrund waren sowohl weniger akzeptiert als auch weniger einflussreich in ihrer Klasse. Elterliche Trennung trug nicht zur sozialen Position eines Kindes bei. N2 - The goal of this study was to investigate individual and familial factors contributing to a child’s social status in its schoolclass. Separating acceptance and influence as two main dimensions of social status, this work aims at clarifying the impact of different attributes for becoming accepted or influential. 234 third and fifth grade children from Berlin schools were administered sociometric measures providing information about social status (acceptance and influence). The contributing factors where measured using peer nominations of each child’s behaviour, school-grades and familial variables such as the parents’ socio-economic status. Results show that acceptance was positively linked to prosocial and negatively linked to aggressive behaviour. Pointing in the same direction, influence was less related to aggression and prosociality than acceptance. Having ideas and a sense of humour contributed positively and being sad contributed negatively to both dimensions of social status. Furthermore, behavioural tendencies mediated the impact of non-behavioural attributes such as gender, relative age in class and school-grades on social status. For example, the positive relation between schoolgrades and social status was mainly mediated by prosocial and non-aggressive behaviour. Looking at gender, girls were more prosocial and less aggressive than boys and therefore more accepted than the latter. Within their class boys were more often represented at both ends of the influence dimension than girls. Moreover highly influential as well as powerless boys were found to be rather aggressive. More complex analyses showed that boys could possibly compensate the negative impact of aggression with humour and ideas. The moderate relation between parental SES and a child’s socials status was fully mediated by a child’s behaviour. SES was more important for the acceptance than for the influence of a child. Children with a migration background were both less accepted and influential. Parental separation did not contribute to a child’s social position. KW - Soziale Ungleichheit KW - Soziometrie KW - Macht KW - Gleichaltrigenbeziehungen KW - Sozialer Status KW - Popularity KW - Power KW - Sociometry KW - Social Status KW - peer relations Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16797 ER - TY - THES A1 - Friese, Viviane A. T1 - Solvato-, vapo, mechanochromic and luminescent behavior of Rhodium, Platinum and Gold complexes and their coordination polymers Y1 - 2016 ER - TY - THES A1 - Jentsch, Anna T1 - Soil gas analytics in geothermal exploration and monitoring T1 - Bodengasanalytik für die Exploration und Überwachung von geothermischen Ressourcen N2 - Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures. In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions. The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development. In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity). The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations. Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment. With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential. N2 - Zu den großen Herausforderungen bei der Erkundung und Nutzung geothermischer Ressourcen, gehören die strukturgeologische Charakterisierung eines geothermischen Systems sowie die Anwendung nachhaltiger Überwachungskonzepte, um Veränderungen im geothermischen Reservoir während der Förderung und/oder Injektion von Fluiden zu verstehen. Bei unzureichender Permeabilität des Reservoirgesteins stellen Verwerfungen und Kluftnetzwerke bevorzugte Bohrziele dar, da sie potentielle Wegsamkeiten für heiße und/oder kalte Fluide sind. Entlang dieser fluidführenden Strukturen können in vulkanisch-geothermischen Systemen auch erhebliche Mengen an Gasemissionen an der Erdoberfläche freigesetzt werden. Im Rahmen dieser Arbeit wurden verschiedene methodische Ansätze und Messkonzepte entwickelt und getestet, um die räumliche und zeitliche Variation verschiedener Bodengasparameter zu bestimmen und diese im Kontext struktureller Permeabilitäten zu interpretieren. Um das Potential der Bodengasanalytik als innovative geothermische Explorations- und Überwachungsmethode zu validieren, wurden die methodischen Ansätze auf drei verschiedene vulkanisch-geothermische Systeme angewendet. Diesbezüglich wurde für jeden Standort ein individueller Messansatz hinsichtlich der bekannten strukturgeologischen Merkmale und standortspezifischen Fragestellung entwickelt. Die erste Studie präsentiert Ergebnisse aus der kombinierten Messung des CO2-Flusses, der Bodentemperatur und der Analyse von Isotopenverhältnissen (δ13CCO2, 3He/4He), welche systematisch und flächendeckend in der geothermischen Produktionszone des Geothermalfeldes Los Humeros, Mexiko, gemessen wurden. Ziel war es, Bereiche mit einer Verbindung zum überkritischen (T > 374◦C and P > 221 bar) und bisher noch ungenutzten geothermischen Reservoir zu identifizieren. Das mit großem Punktabstand und systematisch generierte Messnetz (25 x 200 m) für die Bestimmung des CO2-Flusses erwies sich als schnelle und flexible Anwendung zur Identifizierung von Gebieten mit anomaler CO2-Entgasung. Basierend auf diesen Ergebnissen wurde anschließend mit geringeren Messabständen die genaue Ausdehnung und das heterogene Muster der anomalen Entgasungsgebiete aufgelöst. Dadurch war es möglich, die Entgasungsmuster mit der internen strukturgeologischen Heterogenität einzelner Störungssegmente in Verbindung zu bringen, wodurch Bereiche, die den Gasfluss besonders begünstigen, wie z.B. Störungsschnittpunkte, ermittelt werden konnten. Schließlich wurden vorher unbekannte, geothermisch interessante Bereiche, die eine erhöhte strukturelle Permeabilität aufweisen und eine Verbindung zum überkritischen Reservoir darstellen, identifiziert. Diese Bereiche gelten als besonders vielversprechend für die zukünftige geothermische Exploration und Entwicklung des Geothermalfeldes. In der zweiten Studie wird ein neuartiger Überwachungsansatz vorgestellt, bei dem kontinuierlich der CO2-Fluss gemessen wurde, um Veränderungen im Reservoir zu überwachen, die durch die Reinjektion von kaltem Thermalwasser verursacht werden. Zu diesem Zweck wurde ein automatisiertes Mehrkammer-CO2-Flusssystem innerhalb der Bruchzone einer Hauptstörung aufgebaut. Die Grundlage eines geeigneten Standortes wurde durch die Ergebnisse der CO2-Explorationsuntersuchungen gegeben. Es war von großer Wichtigkeit, dass der Standort eine Verbindung zum geothermischen Reservoir aufweist, erkennbar an hydrothermaler CO2-Entgasung und heißen Bodentemperaturen (> 50 °C). Die Ergebnisse zeigten ein Sinken der Gasemissionen als Reaktion auf Änderungen der Reinjektionsraten innerhalb von 24 h, was auf eine aktive hydraulische Kommunikation zwischen dem geothermischen Reservoir und der Erdoberfläche hinweist. Dies ist ein vielversprechende Methode, da nahezu in Echtzeit und in situ Daten über Veränderungen im Reservoir angezeigt werden und eine rechtzeitige Reaktion auf unerwünschte Veränderungen (z.B. Druckabfall, Seismizität) möglich ist. Die dritte Studie präsentiert Ergebnisse aus dem Aluto-Geothermiefeld in Äthiopien, bei dem eine flächendeckende, Multiparameter-Analyse, bestehend aus CO2-Fluss, 222Rn- und 220Rn-Aktivitätskonzentrationen und Bodentemperaturen durchgeführt wurde, um verborgene fluidführende Strukturen zu erkennen. Die 222Rn- und 220Rn-Aktivitätskonzentrationen wurden als ergänzende Bodengasparameter zum CO2-Fluss verwendet, um ihr Potenzial als zusätzliche Explorationsparameter zu bewerten. Die kombinierte Messung aller Parameter ermöglichte die Entwicklung von Bodengas Fingerabdrücken – ein neuartiger Visualisierungsansatz. Dadurch lässt sich in Abhängigkeit von der Menge an Gasemissionen und deren Fließgeschwindigkeiten das Untersuchungsgebiet in vulkanisch (Wärme), tektonisch (Strukturen) und vulkanischtektonisch dominierte Gebiete unterteilen. Basierend auf diesem Konzept stellen vulkanischtektonisch dominierte Gebiete die vielversprechendsten Ziele für die zukünftige geothermische Exploration und Entwicklung an diesem Standort dar, da hier heiße hydrothermale Fluide entlang durchlässiger Strukturen migrieren. Zwei solche, bisher nicht berücksichtigte Gebiete wurden im Süden und Südosten identifiziert. Darüber hinaus konnten zwei bisher unbekannte Gebiete mit strukturell bedingter Durchlässigkeit anhand der Aktivitätskonzentrationen von 222Rn und 220Rn identifiziert werden. Schließlich wird in der vierten Studie ein neuartiger Messansatz zum Nachweis der strukturbedingten CO2-Entgasung im geothermischen Gebiet Ngapouri, Neuseeland, vorgestellt. Zum ersten Mal wurde die Tunable-Diode-Laser-Methode (TDL) in einem geothermischen Gebiet mit geringer Entgasung angewandt, um ihr Potenzial als geothermische Explorationsmethode zu bewerten. Obwohl der Messansatz auf Profilmessungen basiert, was zu einer geringen räumlichen Auflösung führt, zeigen die Ergebnisse einen Zusammenhang zwischen bekannten und unbekannten Störungen sowie erhöhten CO2-Konzentrationen. Somit erwies sich die TDL-Methode bei der Bestimmung der strukturbedingten Permeabilität auch in solchen Gebieten als erfolgreich, in denen keine offensichtliche geothermische Aktivität vorhanden ist. Mit systematischen und kleinskaligen CO2-Fluss-Messungen, kann anschließend die räumliche Auflösung der Abschnitte eines Profils mit erhöhten CO2-Konzentrationen, verfeinert werden. Mit den Ergebnissen dieser Arbeit konnte ich die Anwendbarkeit systematischer und flächendeckender Bodengasmessungen für geothermische Explorations- und Überwachungszwecke nachweisen. Die Kombination von verschiedenen Bodengasen und deren Messung anhand verschiedener Messnetze ermöglicht die genaue Identifizierung und Charakterisierung fluidführender Strukturen und wurde bisher noch nicht standardmäßig eingesetzt und/oder erprobt. Mit den Ergebnissen der jeweiligen Studien werden effiziente und kostengünstige Arbeitsabläufe dargelegt, die einen praxisorientierten Ansatz zeigen, der zu einer erfolgreichen und nachhaltigen Exploration und Überwachung geothermischer Ressourcen beitragen kann. Letztlich wird somit das Ressourcenrisiko bei der geothermischen Projektentwicklung minimiert. Um das Verständnis der komplexen Struktur und Dynamik geothermischer Systeme voranzutreiben, ist schließlich eine Kombination aus innovativen und flächendeckenden geologischen, geochemischen und geophysikalischen Methoden unerlässlich. KW - geothermal exploration KW - gas geochemistry KW - structural geology KW - geothermal monitoring KW - Gasgeochemie KW - geothermische Exploration KW - geothermische Überwachung KW - Strukturgeologie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-544039 ER - TY - THES A1 - Ehlert, Kristian T1 - Simulations of active galactic nuclei feedback with cosmic rays and magnetic fields N2 - The central gas in half of all galaxy clusters shows short cooling times. Assuming unimpeded cooling, this should lead to high star formation and mass cooling rates, which are not observed. Instead, it is believed that condensing gas is accreted by the central black hole that powers an active galactic nuclei jet, which heats the cluster. The detailed heating mechanism remains uncertain. A promising mechanism invokes cosmic ray protons that scatter on self-generated magnetic fluctuations, i.e. Alfvén waves. Continuous damping of Alfvén waves provides heat to the intracluster medium. Previous work has found steady state solutions for a large sample of clusters where cooling is balanced by Alfvénic wave heating. To verify modeling assumptions, we set out to study cosmic ray injection in three-dimensional magnetohydrodynamical simulations of jet feedback in an idealized cluster with the moving-mesh code arepo. We analyze the interaction of jet-inflated bubbles with the turbulent magnetized intracluster medium. Furthermore, jet dynamics and heating are closely linked to the largely unconstrained jet composition. Interactions of electrons with photons of the cosmic microwave background result in observational signatures that depend on the bubble content. Those recent observations provided evidence for underdense bubbles with a relativistic filling while adopting simplifying modeling assumptions for the bubbles. By reproducing the observations with our simulations, we confirm the validity of their modeling assumptions and as such, confirm the important finding of low-(momentum) density jets. In addition, the velocity and magnetic field structure of the intracluster medium have profound consequences for bubble evolution and heating processes. As velocity and magnetic fields are physically coupled, we demonstrate that numerical simulations can help link and thereby constrain their respective observables. Finally, we implement the currently preferred accretion model, cold accretion, into the moving-mesh code arepo and study feedback by light jets in a radiatively cooling magnetized cluster. While self-regulation is attained independently of accretion model, jet density and feedback efficiencies, we find that in order to reproduce observed cold gas morphology light jets are preferred. N2 - Das zentrale Gas in der Hälfte aller Galaxienhaufen weist kurze Kühlzeiten auf. Dies sollte zu hohen Sternentstehungs- und Massenkühlungsraten führen. Bei ungehinderter Kühlung würden jedoch viel mehr Sterne entstehen als beobachtet. Stattdessen wird vermutet, dass das kondensierende Gas durch das zentrale Schwarze Loch akkretiert wird, das einen aktiven Galaxienkerne antreibt, der den Haufen heizt. Der genaue Heizmechanismus ist noch unklar. Ein vielversprechender Mechanismus geht von Protonen der kosmischen Strahlung aus, die an selbst erzeugten magnetischen Fluktuationen, d.h. Alfvénwellen, streuen. Die kontinuierliche Dämpfung der Alfvénwellen heizt das Gas. Für eine große Anzahl von Galaxienhaufen wurden stationäre Lösungen gefunden, bei denen Kühlen durch Alfvénwellenheizen ausgeglichen wird. Um die Modellierungsannahmen zu überprüfen, untersuchen wir die CR-Injektion in magnetohydrodynamischen 3D-Simulationen von Jets in einem idealisierten Cluster mit dem Code arepo. Wir simulieren die Entstehung und Entwicklung von Gasblasen durch energetische Ausflüsse in einer turbulenten, magnetische Atmosphäre. Darüberhinaus ist die Dynamik des Jets und das Heizen eng verknüpft mit der soweit unklaren Zusammensetzung des Jets. DieWechselwirkung von Elektronen mit dem kosmischen Mikrowellenhintergrund führt zu beobachtbaren Signaturen, die vom Inhalt der Blasen abhängen. Diese jüngsten Beobachtungen lieferten Beweise für unterdichte Blasen mit einer relativistischen Füllung, wobei vereinfachende Modellannahmen für die Blasen angenommen wurden. Indem wir die Beobachtungen mit unseren Simulationen reproduzieren, bestätigen wir die Gültigkeit ihrer Modellannahmen und damit die wichtige Erkenntnis, dass Jets eine niedrige (Impuls-)Dichte haben. Außerdem haben die Geschwindigkeits- und Magnetfeldstruktur der Haufenatmosphäre tiefgreifende Auswirkungen auf die Blasenentwicklung und Heizprozesse. Da Geschwindigkeits- und Magnetfelder physikalisch gekoppelt sind, zeigen wir, dass numerische Simulationen dazu beitragen können, die jeweiligen Beobachtungsdaten in direkte Verbindung zu setzen, um sie dadurch besser abschätzen zu können. Schließlich implementieren wir das derzeit bevorzugte Akkretionsmodell, cold accretion, in arepo und untersuchen die Rückkopplung durch leichte Jets in einem explizit kühlenden magnetisierten Haufen. Während die Selbstregulierung unabhängig vom Akkretionsmodell, der Jetdichte und der Jeteffizienz erreicht wird, ist die Morphologie des kalten Gases bei Simulationen mit leichten Jets Beobachtungen am ähnlichsten. T2 - Simulationen vom Heizen von Galaxienhaufen durch aktive Galaxienkerne mit kosmischer Strahlung und Magnetfeldern KW - galaxy clusters KW - intracluster medium KW - active galactic nuclei KW - magnetohydrodynamics KW - cosmic rays KW - Galaxienhaufen KW - aktive Galaxienkerne KW - Magnetohydrodynamik KW - kosmische Strahlung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-578168 ER - TY - THES A1 - Werhahn, Maria T1 - Simulating galaxy evolution with cosmic rays: the multi-frequency view T1 - Galaxienentwicklung in Simulationen mit komischer Strahlung und deren Strahlungsprozessen N2 - Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM. In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime. I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features. Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra. Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC. Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially. N2 - Kosmische Strahlung (CR) ist ein essentieller Bestandteil des interstellaren Mediums (ISM) von Galaxien und spielt eine wichtige Rolle in deren Entwicklung. Insbesondere ist sie in der Lage, die Dynamik einer Galaxie zu beeinflussen, indem sie galaktische Ausflüsse treibt oder das ISM aufheizt und sich dadurch auf die Effizienz der Sternentstehung auswirkt. Um Galaxienentstehung zu verstehen ist es daher notwendig, diesen nicht-thermischen Bestandteil des ISM genau zu modellieren. Aber außerhalb unserer lokalen Umgebung innerhalb der Milchstraße haben wir keine Möglichkeit, um CRs in anderen Galaxien direkt zu messen. Allerdings gibt es viele Möglichkeiten, CRs indirekt über die Strahlung zu beobachten, die sie auf Grund ihrer Interaktion mit Magnetfeldern und interstellarer Strahlung sowie mit dem ISM emittieren. In dieser Arbeit habe ich einen numerischen Code entwickelt, der die spektrale Verteilung der CRs in Simulationen von isolierten Galaxien berechnet, wobei ein stationäres Verhältnis zwischen Injektion und Kühlen angenommen wird. Des Weiteren berechnet er die nicht-thermischen Strahlungsprozesse, die aus den modellierten CR Protonen- und Elektronenspektren hervorgehen. Diese reichen von Radiowellenlängen bis hin zu hochenergetischer Gammastrahlung. Ich wende diesen Code auf eine Vielzahl von hoch aufgelösten, magneto-hydrodynamischen Simulationen von isolierten Galaxien an, die CRs beinhalten. Das ermöglicht es mir, ihre CR Spektren zu untersuchen und mit Beobachtungen des Voyager-1 Satelliten sowie des AMS-02 Instruments von CR Protonen- und Elektronenspektren zu vergleichen, um dem Ursprung von den gemessenen spektralen Besonderheiten nachzugehen. Außerdem lege ich detaillierte Emissionskarten, Leuchtkräfte und Spektren der nicht-thermischen Strahlung unserer simulierten Galaxien vor, die von Zwerggalaxien über Milchstraßen-ähnliche Galaxien bis hin zu Starburst-Galaxien bei verschiedensten Entwicklungsstadien reichen. Damit kann ich erfolgreich die beobachteten Zusammenhänge zwischen jeweils der Radio- und Gammastrahlungsleuchtkraft mit der Ferninfrarot (FIR) Strahlung der sternbildenden Galaxien reproduzieren, wobei die FIR Strahlung ein guter Indikator für die Rate der Sternentstehung ist. Dabei finde ich heraus, dass Galaxien mit einer hohen Rate an Sternentstehung sehr nah an dem Limit sind, in dem ihre CR Population all ihre Energie an die Produktion von Strahlung verlieren würde, während CRs dazu tendieren, Galaxien mit einer niedrigen Sternentstehungsrate schneller zu verlassen. Zusätzlich untersuche ich die Eigenschaften des Transports von CRs, die benötigt werden, um die beobachteten Spektren der Gammastrahlung zu reproduzieren. Außerdem decke ich die zugrundeliegenden physikalischen Prozesse auf, durch die die Korrelation zwischen der FIR- und Radioleuchtkraft auch in Starburst-Galaxien aufrecht erhalten werden kann und finde heraus, dass die thermische Emission natürlicherweise die beobachteten Radiospektren in Galaxien wie M82 und NGC 253 erklärt, wodurch sich das Rätsel der flachen Radiospektren löst, die scheinbar im Widerspruch zum beobachteten engen Zusammenhang zwischen der FIR- und Radioleuchtkraft standen. Zuletzt hinterfrage ich die Annahme eines stationären Zustandes bei der Modellierung der CR Protonenspektren, indem ich zum ersten Mal den Einfluss von spektral aufgelöstem Transport von CR Protonen in magneto-hydrodynamischen Simulationen auf die hadronische Gammastrahlung von sternbildenden Galaxien untersuche, was neue Einblicke in beobachtbare Signaturen, sowohl spektral als auch räumlich, von CR-Transport ermöglicht. KW - galaxies KW - cosmic rays KW - numerical astrophysics KW - kosmische Strahlung KW - Galaxien KW - numerische Astrophysik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572851 ER - TY - THES A1 - Sieg, Tobias T1 - Reliability of flood damage estimations across spatial scales T1 - Verlässlichkeit von Hochwasserschadensschätzungen über räumliche Skalen N2 - Extreme Naturereignisse sind ein integraler Bestandteil der Natur der Erde. Sie werden erst dann zu Gefahren für die Gesellschaft, wenn sie diesen Ereignissen ausgesetzt ist. Dann allerdings können Naturgefahren verheerende Folgen für die Gesellschaft haben. Besonders hydro-meteorologische Gefahren wie zum Beispiel Flusshochwasser, Starkregenereignisse, Winterstürme, Orkane oder Tornados haben ein hohes Schadenspotential und treten rund um den Globus auf. Einhergehend mit einer immer wärmer werdenden Welt, werden auch Extremwetterereignisse, welche potentiell Naturgefahren auslösen können, immer wahrscheinlicher. Allerdings trägt nicht nur eine sich verändernde Umwelt zur Erhöhung des Risikos von Naturgefahren bei, sondern auch eine sich verändernde Gesellschaft. Daher ist ein angemessenes Risikomanagement erforderlich um die Gesellschaft auf jeder räumlichen Ebene an diese Veränderungen anzupassen. Ein essentieller Bestandteil dieses Managements ist die Abschätzung der ökonomischen Auswirkungen der Naturgefahren. Bisher allerdings fehlen verlässliche Methoden um die Auswirkungen von hydro-meteorologischen Gefahren abzuschätzen. Ein Hauptbestandteil dieser Arbeit ist daher die Entwicklung und Anwendung einer neuen Methode, welche die Verlässlichkeit der Schadensschätzung verbessert. Die Methode wurde beispielhaft zur Schätzung der ökonomischen Auswirkungen eines Flusshochwassers auf einzelne Unternehmen bis hin zu den Auswirkungen auf das gesamte Wirtschaftssystem Deutschlands erfolgreich angewendet. Bestehende Methoden geben meist wenig Information über die Verlässlichkeit ihrer Schätzungen. Da diese Informationen Entscheidungen zur Anpassung an das Risiko erleichtern, wird die Verlässlichkeit der Schadensschätzungen mit der neuen Methode dargestellt. Die Verlässlichkeit bezieht sich dabei nicht nur auf die Schadensschätzung selber, sondern auch auf die Annahmen, die über betroffene Gebäude gemacht werden. Nach diesem Prinzip kann auch die Verlässlichkeit von Annahmen über die Zukunft dargestellt werden, dies ist ein wesentlicher Aspekt für Prognosen. Die Darstellung der Verlässlichkeit und die erfolgreiche Anwendung zeigt das Potential der Methode zur Verwendung von Analysen für gegenwärtige und zukünftige hydro-meteorologische Gefahren. N2 - Natural extreme events are an integral part of nature on planet earth. Usually these events are only considered hazardous to humans, in case they are exposed. In this case, however, natural hazards can have devastating impacts on human societies. Especially hydro-meteorological hazards have a high damage potential in form of e.g. riverine and pluvial floods, winter storms, hurricanes and tornadoes, which can occur all over the globe. Along with an increasingly warm climate also an increase in extreme weather which potentially triggers natural hazards can be expected. Yet, not only changing natural systems, but also changing societal systems contribute to an increasing risk associated with these hazards. These can comprise increasing exposure and possibly also increasing vulnerability to the impacts of natural events. Thus, appropriate risk management is required to adapt all parts of society to existing and upcoming risks at various spatial scales. One essential part of risk management is the risk assessment including the estimation of the economic impacts. However, reliable methods for the estimation of economic impacts due to hydro-meteorological hazards are still missing. Therefore, this thesis deals with the question of how the reliability of hazard damage estimates can be improved, represented and propagated across all spatial scales. This question is investigated using the specific example of economic impacts to companies as a result of riverine floods in Germany. Flood damage models aim to describe the damage processes during a given flood event. In other words they describe the vulnerability of a specific object to a flood. The models can be based on empirical data sets collected after flood events. In this thesis tree-based models trained with survey data are used for the estimation of direct economic flood impacts on the objects. It is found that these machine learning models, in conjunction with increasing sizes of data sets used to derive the models, outperform state-of-the-art damage models. However, despite the performance improvements induced by using multiple variables and more data points, large prediction errors remain at the object level. The occurrence of the high errors was explained by a further investigation using distributions derived from tree-based models. The investigation showed that direct economic impacts to individual objects cannot be modeled by a normal distribution. Yet, most state-of-the-art approaches assume a normal distribution and take mean values as point estimators. Subsequently, the predictions are unlikely values within the distributions resulting in high errors. At larger spatial scales more objects are considered for the damage estimation. This leads to a better fit of the damage estimates to a normal distribution. Consequently, also the performance of the point estimators get better, although large errors can still occur due to the variance of the normal distribution. It is recommended to use distributions instead of point estimates in order to represent the reliability of damage estimates. In addition current approaches also mostly ignore the uncertainty associated with the characteristics of the hazard and the exposed objects. For a given flood event e.g. the estimation of the water level at a certain building is prone to uncertainties. Current approaches define exposed objects mostly by the use of land use data sets. These data sets often show inconsistencies, which introduce additional uncertainties. Furthermore, state-of-the-art approaches also imply problems of missing consistency when predicting the damage at different spatial scales. This is due to the use of different types of exposure data sets for model derivation and application. In order to face these issues a novel object-based method was developed in this thesis. The method enables a seamless estimation of hydro-meteorological hazard damage across spatial scales including uncertainty quantification. The application and validation of the method resulted in plausible estimations at all spatial scales without overestimating the uncertainty. Mainly newly available data sets containing individual buildings make the application of the method possible as they allow for the identification of flood affected objects by overlaying the data sets with water masks. However, the identification of affected objects with two different water masks revealed huge differences in the number of identified objects. Thus, more effort is needed for their identification, since the number of objects affected determines the order of magnitude of the economic flood impacts to a large extent. In general the method represents the uncertainties associated with the three components of risk namely hazard, exposure and vulnerability, in form of probability distributions. The object-based approach enables a consistent propagation of these uncertainties in space. Aside from the propagation of damage estimates and their uncertainties across spatial scales, a propagation between models estimating direct and indirect economic impacts was demonstrated. This enables the inclusion of uncertainties associated with the direct economic impacts within the estimation of the indirect economic impacts. Consequently, the modeling procedure facilitates the representation of the reliability of estimated total economic impacts. The representation of the estimates' reliability prevents reasoning based on a false certainty, which might be attributed to point estimates. Therefore, the developed approach facilitates a meaningful flood risk management and adaptation planning. The successful post-event application and the representation of the uncertainties qualifies the method also for the use for future risk assessments. Thus, the developed method enables the representation of the assumptions made for the future risk assessments, which is crucial information for future risk management. This is an important step forward, since the representation of reliability associated with all components of risk is currently lacking in all state-of-the-art methods assessing future risk. In conclusion, the use of object-based methods giving results in the form of distributions instead of point estimations is recommended. The improvement of the model performance by the means of multi-variable models and additional data points is possible, but small. Uncertainties associated with all components of damage estimation should be included and represented within the results. Furthermore, the findings of the thesis suggest that, at larger scales, the influence of the uncertainty associated with the vulnerability is smaller than those associated with the hazard and exposure. This leads to the conclusion that for an increased reliability of flood damage estimations and risk assessments, the improvement and active inclusion of hazard and exposure, including their uncertainties, is needed in addition to the improvements of the models describing the vulnerability of the objects. KW - hydro-meteorological risk KW - damage modeling KW - uncertainty KW - probabilistic approach KW - economic impacts KW - OpenStreetMap KW - hydro-meteorologische Risiken KW - Schadensmodellierung KW - Unsicherheiten KW - probabilistischer Ansatz KW - ökonomische Auswirkungen KW - OpenStreetMap Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426161 ER - TY - THES A1 - Mubeen, Umarah T1 - Regulation of central carbon and nitrogen metabolism by Target of Rapamycin (TOR) kinase in Chlamydomonas reinhardtii T1 - Regulation des zentralen Kohlen- und Stickstoff Stoffwechsels durch die Target of Rapamycin Kinase in der Grünalge Chlamydomonas reinhardtii N2 - The highly conserved protein complex containing the Target of Rapamycin (TOR) kinase is known to integrate intra- and extra-cellular stimuli controlling nutrient allocation and cellular growth. This thesis describes three studies aimed to understand how TOR signaling pathway influences carbon and nitrogen metabolism in Chlamydomonas reinhardtii. The first study presents a time-resolved analysis of the molecular and physiological features across the diurnal cycle. The inhibition of TOR leads to 50% reduction in growth followed by nonlinear delays in the cell cycle progression. The metabolomics analysis showed that the growth repression is mainly driven by differential carbon partitioning between anabolic and catabolic processes. Furthermore, the high accumulation of nitrogen-containing compounds indicated that TOR kinase controls the carbon to nitrogen balance of the cell, which is responsible for biomass accumulation, growth and cell cycle progression. In the second study the cause of the high accumulation of amino acids is explained. For this purpose, the effect of TOR inhibition on Chlamydomonas was examined under different growth regimes using stable 13C- and 15N-isotope labeling. The data clearly showed that an increased nitrogen uptake is induced within minutes after the inhibition of TOR. Interestingly, this increased N-influx is accompanied by increased activities of nitrogen assimilating enzymes. Accordingly, it was concluded that TOR inhibition induces de-novo amino acid synthesis in Chlamydomonas. The recognition of this novel process opened an array of questions regarding potential links between central metabolism and TOR signaling. Therefore a detailed phosphoproteomics study was conducted to identify the potential substrates of TOR pathway regulating central metabolism. Interestingly, some of the key enzymes involved in carbon metabolism as well as amino acid synthesis exhibited significant changes in the phosphosite intensities immediately after TOR inhibition. Altogether, these studies provide a) detailed insights to metabolic response of Chlamydomonas to TOR inhibition, b) identification of a novel process causing rapid upshifts in amino acid levels upon TOR inhibition and c) finally highlight potential targets of TOR signaling regulating changes in central metabolism. Further biochemical and molecular investigations could confirm these observations and advance the understanding of growth signaling in microalgae. N2 - Target of Rapamycin (TOR) ist das Zentralprotein eines hochkonservierten Proteinkomplexes, welcher Nährstoff- und Energie Ressourcen für zelluläre Wachstumsprozesse kontengiert. Diese Doktorarbeit beschreibt anhand dreier Studien, wie TOR zu diesem Zweck, in der Grünalge Chlamydomonas reinhardtii, den zentralen Stoffwechsel reguliert. Die erste Studie untersucht dazu das zeitaufgelöste Verhalten von Biomolekülen im Tagesverlauf synchronisiert wachsender Algen. Dabei konnte gezeigt werden, das der TOR Inhibitor Rapamycin das Wachstum um 50% reduziert und den Zellzyklus verzögert. Die Zellzyklus Verzögerung scheint dabei hauptsächlich durch veränderte Stoffwechselprozesse erklärt zu sein. Hierbei konnte gezeigt werden, dass TOR vor allem stickstoffhaltige Stoffwechselprodukte (z.B. Aminosäuren) kontrolliert, welche die Grundlage für Biomasseproduktion, Wachstum und den Zellzyklus bilden. Im Rahmen der zweiten Studie konnte dann der molekulare Mechanismus der Akkumulation der zellulären Aminosäuren aufgeklärt werden. Zu diesem Zweck wurden Fütterungsstudien mit 13C- und 15N-Isotopen durchgeführt. Die Ergebnisse dieser Fütterung konnten klar zeigen, dass die Inhibition von TOR zur verstärkten Aufnahme von Stickstoff in die Zelle und dessen Assimilierung in Aminosäuren führt. Die Aufdeckung dieses neuen, von TOR gesteuerten Prozesses eröffnete somit die Frage, wie die Signalkaskade von TOR zu den Enzymen der Aminosäuresynthese verläuft. Detaillierte phosphoproteomische Studien sollten dieser Frage nachgehen und Zielprotein der TOR Kinase zu identifizieren und regulierte Stoffwechselprozesses zu finden. Dabei stellte sich heraus, dass sowohl verschiedene Enzyme der Aminosäuresynthese als auch Enzyme des zentralen Stoffwechsels innerhalb weniger Minuten stark verändert wurden. Zusammenfassend kann man festhalten das die vorliegende Arbeit detaillierte Stoffwechselanalysen des Stoffwechsels nach einer TOR Inhibition aufdeckt. Hierbei ein neuer Mechanismus zur Regulation der Aminosäuresynthese, nach TOR Inhibition gezeigt werden konnte, welche durch systemische Regulation der Phosphorylierungsmuster zellulärer Proteine kontrolliert wird. Zusätzliche molekulare und biochemische Studien konnten weiterhin zeigen, dass wie TOR das zelluläre Wachstum der photosynthetischen Grünalge kontrolliert und somit steuert. KW - Target of Rapamycin kinase KW - Growth signaling KW - metabolism KW - phosphoproteomics KW - Chlamydomonas KW - Target of Rapamycin kinase KW - Wachstumssignale KW - Stoffwechsel KW - Phosphoproteomik KW - Chlamydomonas Y1 - 2018 ER - TY - THES A1 - Demircioglu, Aydin T1 - Reconstruction of deligne classes and cocycles T1 - Rekonstruktion von Deligne Klassen und Kozykeln N2 - In der vorliegenden Arbeit verallgemeinern wir im Wesentlichen zwei Theoreme von Mackaay-Picken und Picken (2002, 2004). Im ihrem Artikel zeigen Mackaay und Picken,dass es eine bijektive Korrespodenz zwischen Deligne 2-Klassen $\xi \in \check{H}^2(M, \mathcal{D}^2)$ und Holonomie Abbildungen von der zweiten dünnen Homotopiegruppe $\pi_2^2(M)$ in die abelsche Gruppe $U(1)$ gibt. Im zweiten Artikel wird eine Verallgemeinerung dieses Theorems bewiesen: Picken zeigt, dass es eine Bijektion gibt zwischen Deligne 2-Kozykeln und gewissen 2-dimensionalen topologischen Quantenfeldtheorien. In dieser Arbeit zeigen wir, dass diese beiden Theoreme in allen Dimensionen gelten.Wir betrachten zunächst den Holonomie Fall und können mittels simplizialen Methoden nachweisen, dass die Gruppe der glatten Deligne $d$-Klassen isomorph ist zu der Gruppe der glatten Holonomie Abbildungen von der $d$-ten dünnen Homotopiegruppe $\pi_d^d(M)$ nach $U(1)$, sofern $M$ eine $(d-1)$-zusammenhängende Mannigfaltigkeit ist. Wir vergleichen dieses Resultat mit einem Satz von Gajer (1999). Gajer zeigte, dass jede Deligne $d$-Klasse durch eine andere Klasse von Holonomie-Abbildungen rekonstruiert werden kann, die aber nicht nur Holonomien entlang von Sphären, sondern auch entlang von allgemeinen $d$-Mannigfaltigkeiten in $M$ enthält. Dieser Zugang benötigt dann aber nicht, dass $M$ hoch-zusammenhängend ist. Wir zeigen, dass im Falle von flachen Deligne $d$-Klassen unser Rekonstruktionstheorem sich von Gajers unterscheidet, sofern $M$ nicht als $(d-1)$, sondern nur als $(d-2)$-zusammenhängend angenommen wird. Stiefel Mannigfaltigkeiten besitzen genau diese Eigenschaft, und wendet man unser Theorem auf diese an und vergleicht das Resultat mit dem von Gajer, so zeigt sich, dass es zuviele Deligne Klassen rekonstruiert. Dies bedeutet, dass unser Rekonstruktionsthreorem ohne die Zusatzbedingungen an die Mannigfaltigkeit M nicht auskommt, d.h. unsere Rekonstruktion benötigt zwar weniger Informationen über die Holonomie entlang von d-dimensionalen Mannigfaltigkeiten, aber dafür muss M auch $(d-1)$-zusammenhängend angenommen werden. Wir zeigen dann, dass auch das zweite Theorem verallgemeinert werden kann: Indem wir das Konzept einer Picken topologischen Quantenfeldtheorie in beliebigen Dimensionen einführen, können wir nachweisen, dass jeder Deligne $d$-Kozykel eine solche $d$-dimensionale Feldtheorie mit zwei besonderen Eigenschaften, der dünnen Invarianz und der Glattheit, induziert. Wir beweisen, dass jede $d$-dimensionale topologische Quantenfeldtheorie nach Picken mit diesen zwei Eigenschaften auch eine Deligne $d$-Klasse definiert und prüfen nach, dass diese Konstruktion sowohl surjektiv als auch injektiv ist. Demzufolge sind beide Gruppen isomorph. N2 - In this thesis we mainly generalize two theorems from Mackaay-Picken and Picken (2002, 2004). In the first paper, Mackaay and Picken show that there is a bijective correspondence between Deligne 2-classes $\xi \in \check{H}^2(M,\mathcal{D}^2)$ and holonomy maps from the second thin-homotopy group $\pi_2^2(M)$ to $U(1)$. In the second one, a generalization of this theorem to manifolds with boundaries is given: Picken shows that there is a bijection between Deligne 2-cocycles and a certain variant of 2-dimensional topological quantum field theories. In this thesis we show that these two theorems hold in every dimension. We consider first the holonomy case, and by using simplicial methods we can prove that the group of smooth Deligne $d$-classes is isomorphic to the group of smooth holonomy maps from the $d^{th}$ thin-homotopy group $\pi_d^d(M)$ to $U(1)$, if $M$ is $(d-1)$-connected. We contrast this with a result of Gajer (1999). Gajer showed that Deligne $d$-classes can be reconstructed by a different class of holonomy maps, which not only include holonomies along spheres, but also along general $d$-manifolds in $M$. This approach does not require the manifold $M$ to be $(d-1)$-connected. We show that in the case of flat Deligne $d$-classes, our result differs from Gajers, if $M$ is not $(d-1)$-connected, but only $(d-2)$-connected. Stiefel manifolds do have this property, and if one applies our theorem to these and compare the result with that of Gajers theorem, it is revealed that our theorem reconstructs too many Deligne classes. This means, that our reconstruction theorem cannot live without the extra assumption on the manifold $M$, that is our reconstruction needs less informations about the holonomy of $d$-manifolds in $M$ at the price of assuming $M$ to be $(d-1)$-connected. We continue to show, that also the second theorem can be generalized: By introducing the concept of Picken-type topological quantum field theory in arbitrary dimensions, we can show that every Deligne $d$-cocycle induces such a $d$-dimensional field theory with two special properties, namely thin-invariance and smoothness. We show that any $d$-dimensional topological quantum field theory with these two properties gives rise to a Deligne $d$-cocycle and verify that this construction is surjective and injective, that is both groups are isomorphic. KW - Holonomie KW - Hauptfaserbündel KW - Gerben KW - Deligne Kohomologie KW - Globale Differentialgeometrie KW - Holonomy KW - Prinicipal Fibre Bundles KW - Gerbes KW - Deligne Cohomology KW - Global Differentialgeometry Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13755 ER - TY - THES A1 - Wischnewski, Juliane T1 - Reconstructing climate variability on the Tibetan Plateau : comparing aquatic and terrestrial signals T1 - Klimarekonstruktionen auf dem Tibet Plateau : aquatische und terrestrische Signale im Vergleich N2 - Spatial and temporal temperature and moisture patterns across the Tibetan Plateau are very complex. The onset and magnitude of the Holocene climate optimum in the Asian monsoon realm, in particular, is a subject of considerable debate as this time period is often used as an analogue for recent global warming. In the light of contradictory inferences regarding past climate and environmental change on the Tibetan Plateau, I have attempted to explain mismatches in the timing and magnitude of change. Therefore, I analysed the temporal variation of fossil pollen and diatom spectra and the geochemical record from palaeo-ecological records covering different time scales (late Quaternary and the last 200 years) from two core regions in the NE and SE Tibetan Plateau. For interpretation purposes I combined my data with other available palaeo-ecological data to set up corresponding aquatic and terrestrial proxy data sets of two lake pairs and two sets of sites. I focused on the direct comparison of proxies representing lacustrine response to climate signals (e.g., diatoms, ostracods, geochemical record) and proxies representing changes in the terrestrial environment (i.e., terrestrial pollen), in order to asses whether the lake and its catchments respond at similar times and magnitudes to environmental changes. Therefore, I introduced the established numerical technique procrustes rotation as a new approach in palaeoecology to quantitatively compare raw data of any two sedimentary records of interest in order to assess their degree of concordance. Focusing on the late Quaternary, sediment cores from two lakes (Kuhai Lake 35.3°N; 99.2°E; 4150 m asl; and Koucha Lake 34.0°N; 97.2°E; 4540 m asl) on the semi-arid northeastern Tibetan Plateau were analysed to identify post-glacial vegetation and environmental changes, and to investigate the responses of lake ecosystems to such changes. Based on the pollen record, five major vegetation and climate changes could be identified: (1) A shift from alpine desert to alpine steppe indicates a change from cold, dry conditions to warmer and more moist conditions at 14.8 cal. ka BP, (2) alpine steppe with tundra elements points to conditions of higher effective moisture and a stepwise warming climate at 13.6 cal. ka BP, (3) the appearance of high-alpine meadow vegetation indicates a further change towards increased moisture, but with colder temperatures, at 7.0 cal. ka BP, (4) the reoccurrence of alpine steppe with desert elements suggests a return to a significantly colder and drier phase at 6.3 cal. ka BP, and (5) the establishment of alpine steppe-meadow vegetation indicates a change back to relatively moist conditions at 2.2 cal. ka BP. To place the reconstructed climate inferences from the NE Tibetan Plateau into the context of Holocene moisture evolution across the Tibetan Plateau, I applied a five-scale moisture index and average link clustering to all available continuous pollen and non-pollen palaeoclimate records from the Tibetan Plateau, in an attempt to detect coherent regional and temporal patterns of moisture evolution on the Plateau. However, no common temporal or spatial pattern of moisture evolution during the Holocene could be detected, which can be assigned to the complex responses of different proxies to environmental changes in an already very heterogeneous mountain landscape, where minor differences in elevation can result in marked variations in microenvironments. Focusing on the past 200 years, I analysed the sedimentary records (LC6 Lake 29.5°N, 94.3°E, 4132 m asl; and Wuxu Lake 29.9°N, 101.1°E, 3705 m asl) from the southeastern Tibetan Plateau. I found that despite presumed significant temperature increases over that period, pollen and diatom records from the SE Tibetan Plateau reveal only very subtle changes throughout their profiles. The compositional species turnover investigated over the last 200 years appears relatively low in comparison to the species reorganisations during the Holocene. The results indicate that climatically induced ecological thresholds are not yet crossed, but that human activity has an increasing influence, particularly on the terrestrial ecosystem. Forest clearances and reforestation have not caused forest decline in our study area, but a conversion of natural forests to semi-natural secondary forests. The results from the numerical proxy comparison of the two sets of two pairs of Tibetan lakes indicate that the use of different proxies and the work with palaeo-ecological records from different lake types can cause deviant stories of inferred change. Irrespective of the timescale (Holocene or last 200 years) or region (SE or NE Tibetan Plateau) analysed, the agreement in terms of the direction, timing, and magnitude of change between the corresponding terrestrial data sets is generally better than the match between the corresponding lacustrine data sets, suggesting that lacustrine proxies may partly be influenced by in-lake or local catchment processes whereas the terrestrial proxy reflects a more regional climatic signal. The current disaccord on coherent temporal and spatial climate patterns on the Tibetan Plateau can partly be ascribed to the complexity of proxy response and lake systems on the Tibetan Plateau. Therefore, a multi-proxy, multi-site approach is important in order to gain a reliable climate interpretation for the complex mountain landscape of the Tibetan Plateau. N2 - Die räumlichen und zeitlichen Temperatur- und Feuchtigkeitsmuster auf dem Tibet-Plateau sind sehr komplex. Im Einzugsbereich der asiatischen Monsune sind insbesondere der Beginn und das Ausmaß des Klimaoptimums während des Holozäns von wissenschaftlichem Interesse, da diese Periode oft als Analogie für die derzeitige globale Klimaerwärmung herangezogen wird. In Hinblick auf sich teilweise widersprechende Paläoklima- und Umweltrekonstruktionen für das Tibet-Plateau, ist es mein Ziel, die bestehenden Unstimmigkeiten bezüglich des Zeitpunktes und des Ausmaßes des Umweltwandels zu erklären. Dafür wurden von mir zeitliche Variationen fossiler Pollen- und Diatomeenspektren und geochemische Untersuchungen an Seesedimenten unterschiedlicher Zeitskalen (Spätquartär und die letzten 200 Jahre) aus zwei Kernregionen auf dem NO und SO Tibet-Plateau analysiert. Zur Unterstützung der Interpretation wurden die hier erhobenen Daten mit bereits vorhandenen paläoökologischen Aufzeichnungen der Lokalitäten kombiniert, um Datensätze der entsprechenden aquatischen und terrestrischen Proxy-Daten (Stellvertreterdaten) zweier Seenpaare aus den beiden Regionen gegenüberstellen zu können. Hierbei konzentrierte ich mich auf den direkten Vergleich von Proxies, die die Seenentwicklung reflektieren (z.B. Diatomeen, Ostracoden, geochemische Eigenschaften), mit Proxies, die Veränderungen der terrestrischen Umgebung des Sees beschreiben (terrestrische Pollen). Durch diesen Vergleich lässt sich beurteilen, ob Veränderungen im See selbst mit Umweltveränderungen in dem jeweiligen Einzugsgebiet zeitlich übereinstimmen. Dafür habe ich die bereits etablierte numerische Methode Procrustes-Rotation als neuen Ansatz in der Paläoökologie eingeführt. Damit ist ein quantitativer Vergleich von Rohdaten zweier beliebiger sedimentärer Datensätze möglich, um den Grad der Übereinstimmung zu prüfen. Um die in dieser Arbeit rekonstruierten Umwelt- und Klimaereignisse des nordöstlichen Tibet-Plateaus in einen größeren Zusammenhang hinsichtlich holozäner Klimaentwicklung des gesamten Plateaus setzen zu können, und um schlüssige zeitliche und räumliche Klimatrends auf dem Plateau erkennen zu können, habe ich auf alle vorhandenen Paläoklimadatensätze einen Fünf-Skalen Feuchtigkeitsindex und eine Clusteranalyse angewandt. Es konnten jedoch keine einheitlichen zeitlichen und räumlichen Trends der holozänen Klimaentwicklung nachgewiesen werden, was meiner Analyse entsprechend, auf die komplexen Reaktionen verschiedener Proxies auf Umweltveränderungen in einer ohnehin sehr heterogen Berglandschaft, zurückgeführt werden kann. Die Ergebnisse des numerischen Proxy-Vergleichs beider Seenpaare zeigen, dass die Verwendung von verschiedenen Proxies und die Arbeit mit paläo-ökologischen Datensätzen unterschiedlicher See-Typen zu abweichenden Klimaableitungen führen können. Unabhängig vom untersuchten Zeitraum (Holozän oder die letzten 200 Jahren) oder der Region (SO oder NO Tibet-Plateau), ist die Übereinstimmung zweier Datensätze hinsichtlich der Richtung, des Zeitpunktes und des Ausmaßes der abgeleiteten Paläo-Umweltverhältnisse in der Regel zwischen den entsprechenden terrestrischen Datensätzen besser als zwischen den entsprechenden lakustrinen Datensätzen. Die derzeitige Uneinigkeit über stimmige zeitliche und räumliche Klimatrends auf dem Tibet-Plateau kann daher teilweise der Komplexität der verschieden Proxies und ihrer individuellen Empfindlichkeiten gegenüber Umweltveränderungen sowie der unterschiedlichen Reaktionsweise verschiedenartiger See-Systeme auf dem Plateau zugeschrieben werden. Meine Ergebnisse zeigen, dass ein „Multi-Proxy-Multi-Site-Ansatz“ für zuverlässige Paläoklimaableitungen für das Tibet-Plateau von zentraler Bedeutung ist. KW - Tibet Plateau KW - Holozän KW - Pollen KW - Diatomeen KW - Prokrustes Analyse KW - Tibetan Plateau KW - Holocene KW - Pollen KW - Diatoms KW - Procrustes rotation analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52453 ER - TY - THES A1 - Videla, Santiago T1 - Reasoning on the response of logical signaling networks with answer set programming T1 - Modellierung Logischer Signalnetzwerke mittels Antwortmengenprogrammierung N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. KW - Systembiologie KW - logische Signalnetzwerke KW - Antwortmengenprogrammierung KW - systems biology KW - logical signaling networks KW - answer set programming Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71890 ER - TY - THES A1 - Michalik-Onichimowska, Aleksandra T1 - Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry N2 - Eine nachhaltigere chemische Industrie erfordert eine Minimierung der Lösungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgeführt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergrößerung des Volumens des Reaktionsmediums geht immer mit der Vergrößerung der Oberfläche einher, die mit dem begrenzenden Gefäß in Kontakt steht. Da das Volumen kubisch, während die Oberfläche quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verhältnis nicht linear zu. Viele an der Grenzfläche zwischen Oberfläche und Flüssigkeit auftretende Phänomene können die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung führt. Die Anwendung von schwebenden Tropfen als behälterlose Reaktionsgefäße bietet eine vielversprechende Möglichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer für die Echtzeitüberwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgefäße fungieren. Das Design des Systems umfasst die berührungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verständnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verständnis dieses Phänomens ist entscheidend, um den Effekt der zeitlichen und räumlichen Auflösung der erzeugten Ionenwolke zu verstehen, die die Auflösung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzflächenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollständig berücksichtigen. Für die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulslängen untersucht, nämlich im ns- und µs-Bereich. Die Bestrahlung über µs-Laserpulse bietet gegenüber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es ermöglichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz führt zu weniger ausgeprägten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld rückgeschlagen, was zum Verlust der Probe führen würde; iii) die milde Laserbestrahlung führt zu einer besseren räumlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Auflösung der detektierten Ionenpakete führt. Schließlich ermöglicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der Nähe des Tropfens ermöglicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu führen. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Moleküle als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgeführt und online überwacht. Für eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten. N2 - One aspect of achieving a more sustainable chemical industry is the minimization of the usage of solvents and chemicals. Thus, optimization and development of chemical processes for large-scale production is favourably performed in small batches. The critical step in this approach is upscaling the batches from the small reaction systems to the large reactors mandatory for cost efficient production in an industrial environment. Scaling up the bulk volume always goes along with increasing the surface where the reaction medium is in contact with the confining vessel. Since volume scales proportional with the cubic dimension while the surface scales quadratic, their ratio is size-dependent. The influence of reaction vessel walls can change the reaction performance. A number of phenomena occurring at the surface-liquid interface can affect reaction rates and yields, resulting in possible difficulties in predicting and extrapolating from small size production scale to large industrial processes. The application of levitated droplets as a containerless reaction vessels provides a promising possibility to avoid the above-mentioned issues. In the presented work, an efficient coupling of acoustically levitated droplets to an ion mobility (IM) spectrometer, operating at ambient conditions, was designed for real-time monitoring of chemical reactions. The design of the system comprises noncontact sampling and ionization of the droplet realised by laser desorption/ionization at 2,94 µm. The scope of the work includes fundamental studies covering understanding of laser irradiation of droplets enclosed in an acoustical field. Understanding of this phenomenon is crucial to comprehending the effects of temporal and spatial resolution of the generated ion plume that influence the resolution of the system. The set-up includes an acoustic trap, laser irradiation and ion manipulation electrostatic lenses operating at high voltage at ambient pressure. The complexity of the design needs to fully be considered for an effective ion transfer at the interface region between the levitated droplet and IM spectrometer. For sampling and ionization, two distinct laser pulse lengths were evaluated, ns and µs. Irradiation via µs laser pulses provides several advantages: i) the droplet volume is not extensively impinged, as in case of ns laser pulses, allowing the sampling of only the small volume of the droplet; ii) the lower fluence results in less pronounced oscillations of the droplet confined in the acoustic field. The droplet will not be dissipated out of the acoustic field leading to loss of the sample; iii) the mild laser irradiation results in better spatial and temporal ion plume confinement, leading to better resolution of the detected ion packets. Finally, this knowledge allows the application of ion optics necessary to induce ion flow between the droplet suspended in the acoustic field and the IM spectrometer. The ion optics, composed of 2 electrostatic lenses placed in the near vicinity of the droplet, allow effective focusing of the ion plume and its redirection directly to the IM spectrometer entrance. This novel coupling has proved to be successful for detection of some simple molecules ionizable at the 2.94 µm wavelength. To further demonstrate the applicability of the system, a proof-of-principle reaction was selected, fulfilling the requirements of the system, and was subjected to comprehensive investigation of its performance. Herein, the reaction between N-Boc cysteine methyl ester and allyl alcohol has been performed in a batch reactor and on-line monitored via 1H NMR to establish reaction propagation. With the additional assessment, it was confirmed that the thiol-ene coupling can be performed within first 20 minutes of the irradiation with a reaction yield above 50%, proving that the reaction can be applied as a study case to assess the possibilities of the developed system. T2 - Echtzeit-Überwachung von (Photo)chemischen Reaktionen in Mikroströmungsreaktoren und schwebenden Tropfen durch IR-MALDI Ionenmoblität- und Massenspektrometrie KW - ion mobility spectrometry KW - mass spectrometry KW - acoustically levitated droplets KW - photochemical reactions KW - akustisch schwebende Tropfen KW - Ionenmobilitätspektrometrie KW - Massenspektrometrie KW - Photochemische Reaktionen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557298 ER - TY - THES A1 - Schneider, Helen T1 - Reactive eutectic media based on ammonium formate for the valorization of bio-sourced materials T1 - Reaktive eutektische Medien auf Basis von Ammoniumformiat zur Aufwertung von biobasierten Substanzen N2 - In the last several decades eutectic mixtures of different compositions were successfully used as solvents for vast amount of chemical processes, and only relatively recently they were discovered to be widely spread in nature. As such they are discussed as a third liquid media of the living cell, that is composed of common cell metabolites. Such media may also incorporate water as a eutectic component in order to regulate properties such as enzyme activity or viscosity. Taking inspiration form such sophisticated use of eutectic mixtures, this thesis will explore the use of reactive eutectic media (REM) for organic synthesis. Such unconventional media are characterized by the reactivity of their components, which means that mixture may assume the role of the solvent as well as the reactant itself. The thesis focuses on novel REM based on ammonium formate and investigates their potential for the valorization of bio-sourced materials. The use of REM allows the performance of a number of solvent-free reactions, which entails the benefits of a superior atom and energy economy, higher yields and faster rates compared to reactions in solution. This is evident for the Maillard reaction between ammonium formate and various monosaccharides for the synthesis of substituted pyrazines as well as for a Leuckart type reaction between ammonium formate and levulinic acid for the synthesis of 5-methyl-2-pyrrolidone. Furthermore, reaction of ammonium formate with citric acid for the synthesis of yet undiscovered fluorophores, shows that synthesis in REM can open up unexpected reaction pathways. Another focus of the thesis is the study of water as a third component in the REM. As a result, the concept of two different dilution regimes (tertiary REM and in REM in solvent) appears useful for understanding the influence of water. It is shown that small amounts of water can be of great benefit for the reaction, by reducing viscosity and at the same time increasing reaction yields. REM based on ammonium formate and organic acids are employed for lignocellulosic biomass treatment. The thesis thereby introduces an alternative approach towards lignocellulosic biomass fractionation that promises a considerable process intensification by the simultaneous generation of cellulose and lignin as well as the production of value-added chemicals from REM components. The thesis investigates the generated cellulose and the pathway to nanocellulose generation and also includes the structural analysis of extracted lignin. Finally, the thesis investigates the potential of microwave heating to run chemical reactions in REM and describes the synergy between these two approaches. Microwave heating for chemical reactions and the use of eutectic mixtures as alternative reaction media are two research fields that are often described in the scope of green chemistry. The thesis will therefore also contain a closer inspection of this terminology and its greater goal of sustainability. N2 - Ein eutektisches System beschreibt eine homogene Mischung verschiedener Substanzen, welche bei einer einzigen Temperatur schmilzt und dabei einen Schmelzpunkt aufweist der unterhalb der Schmelzpunkte der einzelnen Komponenten liegt. Solche Gemische können aus simplen organischen Substanzen gebildet werden und haben deshalb in den letzten Jahrzehnten große Aufmerksamkeit als neuartige Lösungsmittel erhalten. Mittlerweile wird ihr Nutzung für eine Vielzahl chemischer Prozesse erforscht. Zudem wurde Entdeckt das solche Gemische auch in der Natur Verbreitung finden. In diesem Zuge werden sie z.B. als drittes flüssiges Medium der lebenden Zelle diskutiert, welches durch eutektische Gemische von gewöhnlichen Zellmetaboliten gebildet wird. Sie können dabei auch Wasser als eutektische Komponente enthalten, um Eigenschaften wie Enzymaktivität oder Viskosität zu regulieren. Inspiriert durch diesen raffinierten Einsatz eutektischer Gemische untersucht diese Arbeit die Verwendung reaktiver eutektischer Medien (REM) für die chemische Anwendung. Solche unkonventionellen Medien zeichnen sich durch die Reaktivität ihrer Komponenten aus, was bedeutet, dass das Gemisch sowohl die Rolle des Lösungsmittels als auch des Reaktanten selbst übernehmen kann. Die Arbeit konzentriert sich auf neuartige REM auf Basis von Ammoniumformiat und untersucht deren Potenzial für die Nutzung von bio-basierten Substanzen. Die Verwendung von REM ermöglicht die Durchführung einer Reihe lösungsmittelfreier Reaktionen, was im Vergleich zu Reaktionen in Lösung die Vorteile einer besseren Atomökonomie, höhere Ausbeuten und schnellere Reaktionsgeschwindigkeiten mit sich bringt. Dies zeigt sich an der Maillard-Reaktion zwischen Ammoniumformiat und verschiedenen Monosacchariden zur Synthese substituierter Pyrazine sowie an der Leuckart-Reaktion zwischen Ammoniumformiat und Lävulinsäure zur Synthese von 5-Methyl-2-pyrrolidon. Darüber hinaus zeigt die Reaktion von Ammoniumformiat mit Zitronensäure zur Synthese noch unentdeckter Fluorophore, dass die Synthese in REM bisher unerschlossene Reaktionswege eröffnen kann. Ein weiterer Schwerpunkt der Arbeit ist die Untersuchung von Wasser als dritte Komponente im REM. Daher erscheint das Konzept zweier unterschiedlicher Verdünnungsregime (tertiäres REM und REM im Lösungsmittel) nützlich für das Verständnis des Einflusses von Wasser. Es zeigt sich, dass kleine Mengen Wasser von großem Nutzen für die Reaktion sein können, indem sie die Viskosität senken und gleichzeitig die Reaktionsausbeuten erhöhen. Für den Aufschluss von Lignocellulose werden REM auf Basis von Ammoniumformiat und organischen Säuren eingesetzt. Die Arbeit stellt damit einen neuen Ansatz für das Konzept der Bioraffinerie vor, der eine erhebliche Prozessintensivierung durch die gleichzeitige Erzeugung von Cellulose, Lignin sowie die Herstellung von Chemikalien aus REM-Komponenten verspricht. Die Arbeit untersucht die erzeugte Cellulose, sowie die Bedingungen zur Erzeugung von Nanocellulose und umfasst die Strukturanalyse von extrahiertem Lignin. Abschließend untersucht die Arbeit das Potenzial der Mikrowellenenergie zum Erhitzen chemischer Reaktionen in REM und beschreibt die Synergie zwischen diesen beiden Ansätzen. Mikrowellentechnologie für chemische Reaktionen und die Verwendung eutektischer Gemische als alternative Reaktionsmedien sind zwei Forschungsfelder, die häufig im Rahmen der Grünen Chemie beschrieben werden. Die Arbeit beinhaltet daher auch eine genauere Betrachtung dieser Terminologie und ihres übergeordneten Ziels der Nachhaltigkeit. KW - solvent-free reactions KW - deep eutectic solvents KW - microwave synthesis KW - green chemistry KW - biorefinery KW - deoxyfructosazine KW - citrazinic acid KW - Bioraffinerie KW - Citrazinsäure KW - stark eutektisches Lösungsmittel KW - Deoxyfructosazin KW - Grüne Chemie KW - Mikrowellensynthese KW - lösungsmittelfreie Synthese Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613024 ER - TY - THES A1 - Fischer, Jens Walter T1 - Random dynamics in collective behavior - consensus, clustering & extinction of populations T1 - Stochastische Dynamiken in kollektivem Verhalten: Konsens, Gruppenbildung, Aussterben von Populationen N2 - The echo chamber model describes the development of groups in heterogeneous social networks. By heterogeneous social network we mean a set of individuals, each of whom represents exactly one opinion. The existing relationships between individuals can then be represented by a graph. The echo chamber model is a time-discrete model which, like a board game, is played in rounds. In each round, an existing relationship is randomly and uniformly selected from the network and the two connected individuals interact. If the opinions of the individuals involved are sufficiently similar, they continue to move closer together in their opinions, whereas in the case of opinions that are too far apart, they break off their relationship and one of the individuals seeks a new relationship. In this paper we examine the building blocks of this model. We start from the observation that changes in the structure of relationships in the network can be described by a system of interacting particles in a more abstract space. These reflections lead to the definition of a new abstract graph that encompasses all possible relational configurations of the social network. This provides us with the geometric understanding necessary to analyse the dynamic components of the echo chamber model in Part III. As a first step, in Part 7, we leave aside the opinions of the inidividuals and assume that the position of the edges changes with each move as described above, in order to obtain a basic understanding of the underlying dynamics. Using Markov chain theory, we find upper bounds on the speed of convergence of an associated Markov chain to its unique stationary distribution and show that there are mutually identifiable networks that are not apparent in the dynamics under analysis, in the sense that the stationary distribution of the associated Markov chain gives equal weight to these networks. In the reversible cases, we focus in particular on the explicit form of the stationary distribution as well as on the lower bounds of the Cheeger constant to describe the convergence speed. The final result of Section 8, based on absorbing Markov chains, shows that in a reduced version of the echo chamber model, a hierarchical structure of the number of conflicting relations can be identified. We can use this structure to determine an upper bound on the expected absorption time, using a quasi-stationary distribution. This hierarchy of structure also provides a bridge to classical theories of pure death processes. We conclude by showing how future research can exploit this link and by discussing the importance of the results as building blocks for a full theoretical understanding of the echo chamber model. Finally, Part IV presents a published paper on the birth-death process with partial catastrophe. The paper is based on the explicit calculation of the first moment of a catastrophe. This first part is entirely based on an analytical approach to second degree recurrences with linear coefficients. The convergence to 0 of the resulting sequence as well as the speed of convergence are proved. On the other hand, the determination of the upper bounds of the expected value of the population size as well as its variance and the difference between the determined upper bound and the actual value of the expected value. For these results we use almost exclusively the theory of ordinary nonlinear differential equations. N2 - Beziehungen und damit Interaktion sowie Diskussion, aber auch Konflikt und Opposition bilden die Grundbausteine einer jeden Gesellschaft. Häufig wird Kommunikation als der übergreigende Begriff zur Beschreibung interner Strukturen einer Gesellschaft identifiziert. Dabei muss es sich aber nicht um eine Gesellschaft im Sinne von Nationen handeln, sondern kann auch schlicht eine Gruppe von Menschen umfassen, die miteinander strukturiert interagieren, beispielsweise, eine Gruppe von Angestellten, die an einem gemeinsamen Projekt arbeiten, oder die Mitglieder eines sozialen Netzwerks. In dieser Arbeit befassen wir uns mit der mathematischen Beschreibung solcher Prozesse innerhalb von Gruppen und Gesellschaften und legen dabei unseren Fokus auf die Bildung eines Konsens durch Interaktion aber auch die Konsequenzen von Konflikt und das potentielle Aussterben einer Population. Dabei werden zwei Modelle im Fokus des Interesses stehen: Das Echokammer Model sowie eine Erweiterung des Geburts-Todes Prozesses, die die Möglichkeit eines radikalen Abfalls der Populationsgr öße miteinschließt. Wir beginnen mit einer Einführung in Part I und teilen die verbleibende Arbeit in drei Teile auf, wobei sich die ersten beiden technischen Abschnitte, Part II und III, mit einer ausführlichen Analyse der Bausteine des Echokammer Models befassen und im dritten Abschnitt, in Part IV, der erweiterte Geburts- Todes Prozess untersucht wird. Dieser wird im Folgenden als Geburts-Todes Prozess mit teilweiser Katastrophe bezeichnet werden. Das Echokammer Model beschreibt die Entwicklung von Gruppen in zunächst heterogenen sozialen Netzwerken. Unter einem heterogenen sozialen Netzwerk verstehen wir dabei eine Menge von Individuen, von denen jedes exakt eine Meinungen vertritt. Meinungen werden vereinfacht durch Werte in [0, 1] modelliert. Bestehende Beziehungen unter den Individuen können dann durch einen Graphen dargestellt werden. Es handelt sich bei dem Echokammer Modell um ein zeit-diskretes Modell, das entsprechend, ähnlich einem Brettspiel, in Zügen abläuft. In jedem Zug wird zufällig gleichverteilt eine bestehende Beziehung aus dem Netzwerk ausgewählt und die beiden verbundenen Individuen interagieren. Dabei kann es zu zwei verschiedenen Interaktionen kommen. Sind die Meinungen der betroffenen Individuen hinreichend ähnlich, so nähern sie sich weiter in ihren Meinungen an, während sie im Fall von Meinungen, die zu weit von einander liegen, ihre Beziehung auflösen und sich eines der Individuen eine neue Beziehung sucht. 8 In dieser Arbeit untersuchen wir theoretisch die Bausteine dieses Modells. Dabei legen wir die Beobachtung zu Grunde, dass die Veränderungen der Beziehungsstruktur im Netzwerk durch einen System von interagierenden Partikeln auf einem abstrakteren Raum beschrieben werden kann. Dies erlaubt es insbesondere graphentheoretische überlegungen in die Analyse einfließen zu lassen. Diese überlegungen werden ausührlich in Part II diskutiert und führen zur Definition eines neuen, abstrahierten Graphens, der alle möglichen Beziehungskonfigurationen des sozialen Netzwerks umfasst. Dies erlaubt es uns einen ähnlichkeitsbegriff für Beziehungskonfigurationen auf Basis der benachbarten Knoten in besagtem Graphen zu definieren. Dies liefert uns das notwendige geometrische Verständnis um in Part III die dynamischen Komponenten des Echokammer models zu analysieren. Insbesondere fokusieren wir uns dabei auf die Dynamik der Kanten, für die bisher in der Literatur noch keine Ergebnisse existieren. Wir lassen zunächst in Abschnitt 7 die Meinungen der Individuen beiseite und nehmen an, dass die Position der Kanten sich in jedem Zug wie zuvor beschrieben ändert, um eine grundlegendes Verständnis der unterliegenden Dynamik zu erhalten. Unter der Verwendung der Theorie von Markovketten finden wir obere Schranken an die Konvergenzgeschwindigkeit einer assoziierten Markovkette gegen ihre eindeutige stationäre Verteilung und zeigen, dass es Netzwerke gibt, die miteinander identifizierbar und unter der analysierten Dynamik daheingehend ununterscheinbar sind, dass die stationäre Verteilung der assozierten Markovkette diesen Netzwerken dasselbe Gewicht zuordnet. Anschließend beweisen wir eine Reihe von quantitativen Resultaten, die sich insbesondere in Fällen, in denen die assozierte Markovkette reversibel ist, als berechenbar herausstellen. Insbesondere die explizite Form der stationären Verteilung sowie untere Schranken an die Cheeger Konstante zur Beschreibung der Konvergenzgeschwindigkeit stehen dabei im Fokus und werden ausführlich diskutiert. Nach dieser vertieften Analyse des reduzierten Modells, fügen wir die Meinungen unserer Betrachtung wieder hinzu. Das abschließende Result in Abschnitt 8, basierend auf absorbierenden Markovketten, liefert dann, dass in einer reduzierte Version des Echokammer Modells, in dem sich Individuen ähnlicher Meinung nicht annähern, eine hierarchische Struktur der Anzahl der konfliktreichen Beziehung identifiziert werden kann. Dies können wir ausnutzen, um eine obere Schranke an die erwartete Absorptionszeit, unter Zuhilfenahme einer quasi-stationären Verteilung, zu bestimmen. Diese hierarchische Struktur bildet außerdem eine Brücke zu klassischen Theorien von Geburts-Todes und, insbesondere, reinen Todes-Prozessen, für die eine reiche Literatur existiert. Wir zeigen abschließend auf, wie künftige Forschung diese Verbindung ausnutzen kann und diskutieren die Wichtigkeit der Ergbenisse als Bausteine eines vollständigen theoretischen Verständnisses des Echokammer Modells. Part IV stellt abschließend einen veröffentlichten Artikel vor, der sich dem Geburts- Todes Prozess mit teilweiser Katastrophe widmet. Besagter Artikel steht dabei auf zwei Säulen. Zum Einen der expliziten Berechnung des ersten Zeitpunkts einer Katastrophe, wenn die Population zu Beginn der Beobachtung von instabiler Größe ist. KW - Markov chains KW - graph theory KW - complex systems KW - interacting particle systems KW - Markovketten KW - komplexe Systeme KW - Graphentheorie KW - Systeme interagierender Partikel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553725 ER - TY - THES A1 - Schauer, Nicolas T1 - Quantitative trait loci (QTL) for metabolite accumulation and metabolic regulation : metabolite profiling of interspecific crosses of tomato T1 - Metabolomische Analyse von interspezifischen Tomaten N2 - The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample. Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of S. pennellii introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation. N2 - Die Einführung von Hochdurchsatzmethoden zur Analyse von biologischen Systemen, sowie die umfangreiche Sequenzierung von Genomen haben zu einer Verlagerung der Forschung „im Detail“ zu einer ganzheitlicheren Betrachtungsweise auf Systemebene geführt. Aus einer jahrhundertlangen, intensiven Züchtung und Selektion von Nutzpflanzen resultierte gleichzeitig eine Abnahme der genetischen Varianz. Daraus resultierend sind Nutzpflanzen anfälliger gegenüber Stressfaktoren, wie Pathogenen, hohen Salzkonzentrationen oder Trockenheit, als ihre Wildarten. Das Potential konventioneller Züchtung scheint somit heute an seine Grenzen gekommen zu sein. Daher versucht man mittels moderner Molekulartechnik, wie zum Beispiel Marker-gestützte Selektion, Gene oder ganze Genombereiche von Wildarten mit hoher genetischer Variation in Nutzpflanzen einzukreuzen, vornehmlich mit dem Ziel einer Ertrags- bzw. Resistenzsteigerung. Neueste medizinische Studien belegen, dass die Ernährung eine wesentliche Rolle für die menschliche Gesundheit spielt. Besonders wichtig sind hierbei die gesundheitsfördernden Substanzen in pflanzlichen Nahrungsmitteln. Aus diesem Grund kommt der Erforschung der biochemischen Zusammensetzung von biologischen Proben eine immer größere Bedeutung zu. Diese Untersuchung kann elegant durch Metabolitenprofile, welche die multivariate Analyse komplexer biologischer Proben erlauben, durchgeführt werden. In dieser Arbeit wurde zur Untersuchung der biochemischen Zusammensetzung von Tomatenwildarten und interspezifischen S. pennellii Tomatenintrogressionslinien (IL) eine GC/MS basierte Metabolitenanalyseplattform verwendet. Hierzu war es zunächst notwendig eine Massenspektrenbibliothek, zur Annotierung von Massenspektren und Retentionsindices von, in pflanzlichen Proben vorkommenden, Metaboliten anzulegen. Die Analyse der Tomatenwildarten ergab große Unterschiede gegenüber der Kulturtomate im Hinblick auf den Gehalt an Amino- und organischen Säuren, sowie der Zuckerzusammensetzung und den Gehalt an Sekundärmetaboliten. Die darauf folgende Analyse der ILs, von den jede ein genau definiertes genomisches Segment von S. pennellii beinhaltet, bestätigte diese enorme Variation mit 889 metabolischen und 326 ertragsassozierten-Veränderungen in den ILs. Die metabolischen Veränderungen zeichneten sich durch abnehmende bzw. steigende Gehalte von einzelnen Metaboliten, aber auch durch eine koordinierte Änderung aus. In dieser Arbeit wurde weiterhin der Biosyntheseweg der Volatilenstoffe Phenylethanol und Phenylacetaldehyd mit Hilfe einer IL untersucht. Hierbei konnten durch stabile Isotopenmarkierung und eines „reverse genetics“-Ansatzes Gene bzw. Enzyme identifiziert werden, die für die Dekarboxylierung des Eduktes Phenylalanin verantwortlich sind. Diese Arbeit beschreibt erstmals die umfassende Analyse von biochemischen Komponenten auf Genombasis in Tomatenintrogressionslinien und zeigt damit ein Werkzeug auf zur Identifizierung von qualitativen biochemischen Merkmalen in der modernen molekularen Züchtung. KW - Tomate KW - Metabolit KW - GC-MS KW - Introgression KW - Frucht KW - Metabolome KW - Züchtung KW - metabolic genomics KW - Tomato KW - metabolite profiling KW - metabolome KW - breeding KW - crops KW - fruit KW - metabolite breeding KW - metabolic genomics Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7643 ER - TY - THES A1 - Herrero Alonso, Yohana T1 - Properties of high-redshift galaxies in different environments T1 - Eigenschaften von Galaxien mit hoher Rotverschiebung in verschiedenen Umgebungen N2 - The Lyman-𝛼 (Ly𝛼) line commonly assists in the detection of high-redshift galaxies, the so-called Lyman-alpha emitters (LAEs). LAEs are useful tools to study the baryonic matter distribution of the high-redshift universe. Exploring their spatial distribution not only reveals the large-scale structure of the universe at early epochs, but it also provides an insight into the early formation and evolution of the galaxies we observe today. Because dark matter halos (DMHs) serve as sites of galaxy formation, the LAE distribution also traces that of the underlying dark matter. However, the details of this relation and their co-evolution over time remain unclear. Moreover, theoretical studies predict that the spatial distribution of LAEs also impacts their own circumgalactic medium (CGM) by influencing their extended Ly𝛼 gaseous halos (LAHs), whose origin is still under investigation. In this thesis, I make several contributions to improve the knowledge on these fields using samples of LAEs observed with the Multi Unit Spectroscopic Explorer (MUSE) at redshifts of 3 < 𝑧 < 6. N2 - Die Lyman-𝛼 (Ly𝛼)-Linie erleichtert die Detektion von Galaxien bei hoher Rotverschiebung, sogenannten den Lyman-Alpha-Emittern (LAEs). Die Erforschung ihrer Verteilung enthüllt nicht nur die großräumige Struktur des Universums in frühen Epochen, sondern bietet auch einen Einblick in die Entstehung und Entwicklung der Galaxien, die wir heute beobachten. Da Halos aus Dunkler Materie (DMHs) als Orte der Galaxienentstehung dienen, spiegelt die LAE-Verteilung auch die der zugrunde liegenden Dunklen Materie wider. Darüber hinaus sagen theoretische Studien voraus, dass die Verteilung von LAEs auch Auswirkungen auf ihr eigenes zirkumgalaktisches Medium (CGM) hat, indem sie ihre ausgedehnten gasförmigen Ly𝛼-Halos (LAHs) beeinflusst. In dieser Dissertation leiste ich mehrere Beiträge zur Verbesserung des Wissens über diese Felder anhand von Stichproben von LAEs, die mit dem Multi Unit Spectroscopic Explorer (MUSE) bei Rotverschiebungen von 3 < 𝑧 < 6 beobachtet wurden. KW - high-redshift KW - Lyman-alpha emitters KW - clustering KW - large-scale structure KW - Lyman-Alpha-Emitter KW - Clustering KW - hoher Rotverschiebung KW - großräumige Struktur des Universums Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613288 ER - TY - THES A1 - Latnikova, Alexandra T1 - Polymeric capsules for self-healing anticorrosion coatings T1 - Polymerische Kapseln für selbstheilende Korrosionsschutzbeschichtungen N2 - The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests. N2 - In Anlehnung an den Selbstheilungsmechanismus der menschlichen Haut entwickeln wir ein innovatives Verfahren zur Funktionalisierung von Korrosionsschutzbeschichtungen, um auch diese in die Lage zu versetzen Beschädigungen selbstständig „auszuheilen“. Dazu werden winzige Mikro- und Nanobehälter mit aktiven Substanzen (z. B. Korrosionshemmstoffen, Versiegelungsmitteln, Bioziden etc.) befüllt und anschließend in eine Korrosionsschutzbeschichtung eingebettet. Kommt es nun im Zeitablauf zu korrosionsauslösenden Beschädigungen der Schutzbeschichtung (z. B. durch Kratzer oder Risse) werden an der Defektstelle die eingebetteten Behälter zerstört und aktiv wirkende Gegensubstanzen freigesetzt. Dadurch wird die verletzte Stelle sofort wieder verschlossen und die Korrosionsgefahr eliminiert. Der entscheidende Vorteil derart funktionalisierter Schutzbeschichtungen ist ihre aktive Rückkopplung mit dem Korrosionsauslöser: Die aktive Schutzsubstanz wird nur an der Defektstelle und nur in der zur Korrosionsvermeidung erforderlichen Menge freigegeben. Somit werden eine länger anhaltende Wirkdauer sowie eine deutlich höhere Nachhaltigkeit der Beschichtungen ermöglicht. Dieses „intelligente Verhalten“ der neuen aktiven Korrosionsschutzbeschichtungen ist nur dank ihrer innovativen Mikrostruktur möglich. Die winzigen Mikro- und Nanobehälter beinhalten nicht nur aktive Substanzen in ihrem Inneren sondern besitzen auch eine intelligent konstruierte Hüllenstruktur, deren Durchlässigkeit sich je nach Art des Korrosionsauslösers ändert. Wird die eingekapselte aktive Substanz freigesetzt, fängt diese sofort an gegen die korrosionsverursachenden Einflüsse zu wirken. Ist die Gefahr beseitigt verringert sich die Durchlässigkeit der Behälterhülle wieder. Diese bedingte Reversibilität zwischen geschlossenem und geöffnetem Zustand des Behälters sorgt für einen sehr sparsamen Verbrauch der aktiven Substanz und für die stark verbesserte Schutzwirkung darauf basierender Antikorrosionsbeschichtungen. Diese Arbeit befasst sich mit dem Aufbau polymerer Kern-Schale-Mikrokapseln, die entsprechende Korrosionsinhibitoren und Biocide enthalten. Der Morphologie wird für zahlreiche Lösungsmittel und Polymere mit Hilfe der Hansen-Löslichkeitsparameter in guter Übereinstimmung mit elektronenmikroskopischen Experimenten beschrieben. Die Wirkungsweise in technischen Beschichtungen wird quantifiziert anhand von elektrochemischer Impedanzspektroskopie, Rastervibrationssondenmessungen und industrienahen Testverfahren. KW - Korrosion KW - Selbstheilende Beschichtungen KW - Einkapselung KW - Morphologie von Kapseln KW - corrosion KW - self-healing coatings KW - encapsulation KW - capsule morphology Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60432 ER - TY - THES A1 - Windirsch-Woiwode, Torben T1 - Permafrost carbon stabilisation by recreating a herbivore-driven ecosystem T1 - Stabilisierung von Permafrostkohlenstoff durch die Wiedereinführung eines Herbivor-geprägten Ökosystems N2 - With Arctic ground as a huge and temperature-sensitive carbon reservoir, maintaining low ground temperatures and frozen conditions to prevent further carbon emissions that contrib-ute to global climate warming is a key element in humankind’s fight to maintain habitable con-ditions on earth. Former studies showed that during the late Pleistocene, Arctic ground condi-tions were generally colder and more stable as the result of an ecosystem dominated by large herbivorous mammals and vast extents of graminoid vegetation – the mammoth steppe. Characterised by high plant productivity (grassland) and low ground insulation due to animal-caused compression and removal of snow, this ecosystem enabled deep permafrost aggrad-ation. Now, with tundra and shrub vegetation common in the terrestrial Arctic, these effects are not in place anymore. However, it appears to be possible to recreate this ecosystem local-ly by artificially increasing animal numbers, and hence keep Arctic ground cold to reduce or-ganic matter decomposition and carbon release into the atmosphere. By measuring thaw depth, total organic carbon and total nitrogen content, stable carbon iso-tope ratio, radiocarbon age, n-alkane and alcohol characteristics and assessing dominant vegetation types along grazing intensity transects in two contrasting Arctic areas, it was found that recreating conditions locally, similar to the mammoth steppe, seems to be possible. For permafrost-affected soil, it was shown that intensive grazing in direct comparison to non-grazed areas reduces active layer depth and leads to higher TOC contents in the active layer soil. For soil only frozen on top in winter, an increase of TOC with grazing intensity could not be found, most likely because of confounding factors such as vertical water and carbon movement, which is not possible with an impermeable layer in permafrost. In both areas, high animal activity led to a vegetation transformation towards species-poor graminoid-dominated landscapes with less shrubs. Lipid biomarker analysis revealed that, even though the available organic material is different between the study areas, in both permafrost-affected and sea-sonally frozen soils the organic material in sites affected by high animal activity was less de-composed than under less intensive grazing pressure. In conclusion, high animal activity af-fects decomposition processes in Arctic soils and the ground thermal regime, visible from reduced active layer depth in permafrost areas. Therefore, grazing management might be utilised to locally stabilise permafrost and reduce Arctic carbon emissions in the future, but is likely not scalable to the entire permafrost region. N2 - Mit dem arktischen Boden als riesigem und temperatursensiblen Kohlenstoffspeicher ist die Aufrechterhaltung niedriger Bodentemperaturen und gefrorener Bedingungen zur Verhinde-rung weiterer Kohlenstoffemissionen, die zum globalen Klimawandel beitragen, ein Schlüs-selelement im Kampf der Menschheit, die Erde weiterhin bewohnbar zu halten. Vorangehen-de Studien ergaben, dass die Bodenbedingungen in der Arktis während des späten Pleisto-zäns im Allgemeinen kälter und dadurch stabiler waren, als Ergebnis eines Ökosystems, das von großen pflanzenfressenden Säugetieren und weiten Flächen grasartiger Vegetation do-miniert wurde - der Mammutsteppe. Gekennzeichnet durch hohe Pflanzenproduktivität (Gras-land) und geringe Bodenisolierung aufgrund von Kompression und Schneeräumung durch Tiere, ermöglichte dieses Ökosystem eine tiefreichende Entwicklung des Permafrosts. Heut-zutage, mit der vorherrschenden Tundra- und Strauchvegetation in der Arktis, sind diese Ef-fekte nicht mehr präsent. Es scheint aber möglich, dieses Ökosystem lokal durch künstliche Erhöhung der Tierbestände nachzubilden und somit den arktischen Boden kühl zu halten, um den Abbau von organischem Material und die Freisetzung von Kohlenstoff in die Atmosphäre zu verringern. Durch Messungen der Auftautiefe, des Gesamtgehalts des organischen Kohlenstoffs und Stickstoffs, des stabilen Kohlenstoff-Isotopenverhältnisses, des Radiocarbonalters, der n-Alkan- und Alkoholcharakteristika sowie durch Bestimmung der vorherrschenden Vegetati-onstypen entlang von Beweidungsgradienten in zwei unterschiedlichen arktischen Gebieten habe ich festgestellt, dass die Schaffung ähnlicher Bedingungen wie in der Mammutsteppe möglich sein könnte. Für durch Permafrost beeinflusste Böden konnte ich zeigen, dass eine intensive Beweidung im direkten Vergleich mit unbeweideten Gebieten die Tiefe der Auftau-schicht verringert und zu höheren Gehalten an organischem Kohlenstoff im oberen Bodenbe-reich führt. Für im Winter nur oberflächlich gefrorene Böden konnte kein Anstieg des organi-schen Kohlenstoffgehalts mit zunehmender Beweidungsintensität festgestellt werden, höchstwahrscheinlich aufgrund von Störfaktoren wie vertikalen Wasser- und Kohlenstoffbe-wegungen, die nicht durch eine undurchlässige Schicht wie beim Permafrost begrenzt sind. In beiden Gebieten führte eine hohe Tieraktivität zu einer Umwandlung der Vegetation hin zu artenarmen, von Gräsern dominierten Landschaften mit weniger Sträuchern. Die Analyse von Lipid-Biomarkern ergab, dass das verfügbare organische Material zwar zwischen den Unter-suchungsgebieten unterschiedlich war, aber sowohl in Permafrostgebieten als auch in saiso-nal gefrorenen Böden in Bereichen mit hoher Tieraktivität weniger stark zersetzt war als unter geringerer Beweidungsintensität. Zusammenfassend beeinflusst eine hohe Tieraktivität die Zersetzungsvorgänge in arktischen Böden und das thermische Regime des Bodens, was sich in einer reduzierten Tiefe der Auftauschicht in Permafrostgebieten widerspiegelt. Daher könn-te das Beweidungsmanagement in Zukunft aktiv eingesetzt werden, um den Permafrost lokal zu stabilisieren und gefroren zu halten sowie die Kohlenstoffemissionen in der Arktis zu ver-ringern. Aufgrund der Größe der Fläche, die in der terrestrischen Arktis von Permafrost be-einflusst ist, wird ein solches Beweidungsmanagement aber nicht als Maßnahme auf die ge-samte Permafrostregion ausgedehnt werden können. KW - permafrost KW - carbon KW - climate change KW - grazing KW - Arctic KW - Arktis KW - Kohlenstoff KW - Klimawandel KW - Beweidung KW - Permafrost Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624240 ER - TY - THES A1 - Ruiz Rodriguez, Janete Lorena T1 - Osmotic pressure effects on collagen mimetic peptides N2 - Collagen is the most abundant protein in mammals. In many tissues, collagen molecules assemble to form a hierarchical structure. In the smallest supramolecular unit, named fibril, each molecule is displaced in the axial direction with respect to its neighbors. This staggering creates a periodic gap and overlap regions, where the gap regions exhibit 20% less density. These fibril-forming collagens play an essential role in the strength of connective tissues. Despite much effort, directed at understanding collagen function and regulation, the influence of the chemical environment on the local structural and mechanical properties remains poorly understood. Recent studies, aimed at elucidating the effect of osmotic pressure, showed that collagen contracts upon water removal. This observation highlights the importance of water for the stabilization and mechanics of the collagen molecule. Using collagen mimetic peptides (CMPs), which fold into triple helical structures reminiscent of natural collagen, the primary goal of this work was to investigate the effect of the osmotic pressure on specific collagen-mimetic sequences. CMPs were used as the model system as they provide sequence control, which is essential for discriminating local from global structural changes and for relating the observed effects to existing knowledge about the full-length collagen molecule. Of specific interest was the structure of individual collagen triple helices as well as their organization into self-assembled higher order structures. These key structural features were monitored with infrared spectroscopy (IR) and synchrotron X-ray scattering, while varying the osmotic pressure. For controlling the osmotic pressure, CMP powder samples were incubated in air of defined relative humidity, ranging from dry conditions to highly “humid”. In addition, to obtain more biologically relevant conditions, the CMPs were measured in ultrapure water and in solutions containing small molecule osmolytes. Using the sequences (Pro-Pro-Gly)10, (Pro-Hyp-Gly)10 and (Hyp-Hyp-Gly)10, it was shown that CMPs with different degrees of proline hydroxylation (Hyp = hydroxyproline) exhibit a sequence-specific response to osmotic pressure. IR spectroscopy revealed that osmotic pressure changes affect the strength of the triple helix stabilizing, interchain hydrogen bond and that the extent of this change depends on the degree of hydroxylation. X-ray scattering experiments further showed that changes in osmotic pressure affect both the molecular length as well as the higher order organization of CMPs. Starting from a pseudo-hexagonal packing in the dry state, all three CMPs showed isotropic swelling when increasing the water content to approximately 1.2 water molecules per amino acid, again to different extents depending on the degree of hydroxylation. When increasing the water content further, this pseudo-hexagonal arrangement breaks down. In the fully hydrated state, each CMP is characterized by its own specific and more complex packing geometry. While these changes in the lateral packing arrangement suggest swelling upon hydration, an overall decrease of the molecular length (i.e. contraction) was observed in the axial direction. Also for this structural feature, a strong dependency on the specific amino acid sequence was found. Interestingly, the observed contraction is the opposite of what has been reported for natural collagen. As (Pro-Pro-Gly)n, (Pro-Hyp-Gly)n and (Hyp-Hyp-Gly)n repeat units are found in collagen with a relatively high abundance, this suggests that other collagen sequence fragments need to respond to hydration in the opposite way to obtain a net elongation of the full-length collagen molecule. To test this hypothesis, sequences predicted to be sensitive to osmotic pressure were considered. One such sequence, consisting of two repeat units (Ala-Arg-Gly-Ser-Asp-Gly), was inserted as a guest into a (Pro-Pro-Gly) host. When compared to the canonical CMP sequences investigated earlier, the lateral helix packing follows a similar trend with increasing hydration; however, the host-guest CMP axially elongates with increasing water content. This behavior is more similar to what has been found for natural collagen and suggests that different sequences do determine the molecular length of collagen sequences differently. Interestingly, the canonical sequences are more abundant in the overlap region while the guest sequence is found in the gap region. This allows to speculate that sequences in the gap and overlap regions possess a specifically fine-tuned local response to osmotic pressure changes. Clearly, more experiments with additional sequences are needed to confirm this. In conclusion, the results obtained in this work indicate a highly sequence specific interaction between collagen and water. Osmotic pressure-induced conformational changes mostly originate from local geometries and bonding patterns and affect both the structure of individual triple helices as well as higher order assemblies. One key remaining question is how these conformational changes affect the local mechanical properties of the collagen molecule. As a first step, the stiffness (persistence length) of full-length collagen was determined using atomic force microscopy. In the future, experimental strategies need to be developed that allow for investigating the mechanical properties of specific collagen sequences, e.g. performing single-molecule force spectroscopy of CMPs. Y1 - 2019 ER - TY - THES A1 - Jongejans, Loeka Laura T1 - Organic matter stored in ice-rich permafrost T1 - Ablagerung von organischem Kohlenstoff in eisreichem Permafrost BT - future permafrost thaw and greenhouse gas release BT - zukünftige Permafrosttauen und Treibhausgasemissionen N2 - The Arctic is changing rapidly and permafrost is thawing. Especially ice-rich permafrost, such as the late Pleistocene Yedoma, is vulnerable to rapid and deep thaw processes such as surface subsidence after the melting of ground ice. Due to permafrost thaw, the permafrost carbon pool is becoming increasingly accessible to microbes, leading to increased greenhouse gas emissions, which enhances the climate warming. The assessment of the molecular structure and biodegradability of permafrost organic matter (OM) is highly needed. My research revolves around the question “how does permafrost thaw affect its OM storage?” More specifically, I assessed (1) how molecular biomarkers can be applied to characterize permafrost OM, (2) greenhouse gas production rates from thawing permafrost, and (3) the quality of OM of frozen and (previously) thawed sediments. I studied deep (max. 55 m) Yedoma and thawed Yedoma permafrost sediments from Yakutia (Sakha Republic). I analyzed sediment cores taken below thermokarst lakes on the Bykovsky Peninsula (southeast of the Lena Delta) and in the Yukechi Alas (Central Yakutia), and headwall samples from the permafrost cliff Sobo-Sise (Lena Delta) and the retrogressive thaw slump Batagay (Yana Uplands). I measured biomarker concentrations of all sediment samples. Furthermore, I carried out incubation experiments to quantify greenhouse gas production in thawing permafrost. I showed that the biomarker proxies are useful to assess the source of the OM and to distinguish between OM derived from terrestrial higher plants, aquatic plants and microbial activity. In addition, I showed that some proxies help to assess the degree of degradation of permafrost OM, especially when combined with sedimentological data in a multi-proxy approach. The OM of Yedoma is generally better preserved than that of thawed Yedoma sediments. The greenhouse gas production was highest in the permafrost sediments that thawed for the first time, meaning that the frozen Yedoma sediments contained most labile OM. Furthermore, I showed that the methanogenic communities had established in the recently thawed sediments, but not yet in the still-frozen sediments. My research provided the first molecular biomarker distributions and organic carbon turnover data as well as insights in the state and processes in deep frozen and thawed Yedoma sediments. These findings show the relevance of studying OM in deep permafrost sediments. N2 - Die Arktis ist eine der sich am schnellsten verändernden Regionen der Erde, was zum tauen des dortigen Permafrosts führt. Eisreicher Permafrost, wie der spätpleistozäne Yedoma, ist besonders anfällig für schnelle und tiefe Auftauprozesse infolge von Absenkungen der Oberfläche nach dem Schmelzen des Grundeises. Durch das Auftauen des Permafrosts wird der im Permafrost gespeicherte Kohlenstoff für Mikroben zunehmend zugänglich, was zu erhöhten Treibhausgasemissionen führt und die Klimaerwärmung verstärkt. Die Untersuchung der molekularen Struktur und der biologischen Abbaubarkeit von organischem Material (OM) im Permafrost ist dringend erforderlich. In meiner Forschung geht es um die zentrale Frage inwieweit das Auftauen des Permafrost die Speicherfähigkeit von OM beeinflusst. Insbesondere untersuchte ich (1) wie molekulare Biomarker bei der Charakterisierung von Permafrost-OM verwendet werden können, (2) Treibhausgasproduktionsraten in auftauendem Permafrost und (3) die Qualität von OM in gefrorenen und (vorher) aufgetauten Sedimenten. Dazu habe ich tiefe (bis zu 55 m) Yedoma und aufgetaute Yedoma Permafrostsedimente aus Jakutien (Republik Sacha) untersucht. Es wurden Sedimentkerne unter Thermokarstseen auf der Bykovsky-Halbinsel (südöstlich des Lenadeltas) und im Yukechi-Alas (Zentraljakutien) entnommen, und deren Biomarkerkonzentrationen gemessen. Desweiteren wurden Bodenproben von der Permafrostklippe Sobo-Sise (Lenadelta) und der Taurutschung Batagai (Jana-Hochland) genommen und untersucht. Darüber hinaus habe ich Inkubationsexperimente durchgeführt, um die Treibhausgasproduktion in auftauenden Permafrost zu quantifizieren. Ich habe gezeigt, dass Biomarker-Proxies nützlich sind, um die Quelle des OM zu ermitteln und zwischen OM aus Landpflanzen, Wasserpflanzen und mikrobieller Aktivität zu unterscheiden. Außerdem sind einige Proxies hilfreich, den Abbaugrad von Permafrost-OM zu beurteilen. Dies trifft insbesondere in Kombination mit sedimentologischen Daten in einem Multi-Proxy-Ansatz. Ich zeigte dass der OM von Yedoma im Allgemeinen besser erhalten ist als der von aufgetauten Yedoma-Sedimenten. Die Treibhausgasproduktion in den erstmalig auftauenden Permafrostsedimenten war am höchsten. Dies bedeutet, dass die gefrorenen Yedoma-Sedimente das meiste labile OM enthielten. Außerdem zeigte ich, dass sich die methanproduzierenden Gemeinschaften in den frisch aufgetauten Sedimenten etabliert hatten, jedoch nicht in den noch gefrorenen Sedimenten. Meiner Forschung hat die ersten molekularen Biomarkerverteilungen und Kohlenstoffumsatzdaten geliefert und Einsichten in den Zustand und Prozesse von gefrorenen und aufgetauten Yedoma-Sedimenten geschaffen. Diese Ergebnisse demonstrieren die Relevanz der Untersuchung von OM in tiefen Permafrostsedimenten. N2 - Het Noordpoolgebied verandert snel en permafrost ontdooit. Met name ijsrijke permafrost, zoals Yedoma uit het laat Pleistoceen, is gevoelig voor snelle en diepe dooiprocessen als gevolg van bodemdaling na het smelten van bodemijs. Door het ontdooien van permafrost wordt het permafrostkoolstofreservoir beter toegankelijk voor microben, wat tot verhoogde broeikasgasemissies leidt en de klimaatopwarming versterkt. Het is van groot belang om de moleculaire structuur en de biologische afbreekbaarheid van organisch materiaal (OM) in permafrost vast te leggen. Mijn onderzoek draait om de vraag "hoe beinvloedt permafrostdooi de OM-opslag?" Specifiek heb ik onderzocht (1) hoe moleculaire biomarkers kunnen worden gebruikt om permafrost-OM te karakteriseren, (2) wat broeikasgasproductiesnelheden in ontdooiende permafrost zijn en (3) wat de kwaliteit is van het OM in bevroren en (eerder) ontdooide sedimenten. Ik heb diepe (max. 55 m) Yedoma en ontdooide Yedoma permafrostsedimenten uit Jakoetië (republiek Sacha) onderzocht. Sedimentkernen zijn genomen onder thermokarstmeren op het Bykovsky schiereiland (ten zuidoosten van de Lenadelta) en in de Yukechi Alas (centraal Jakoetië). Ook zijn bodemmonsters genomen van de permafrostklif Sobo-Sise (Lenadelta) en de zogenaamde thaw slump Batagai (Jana-hoogvlakte). In alle monsters heb ik de biomarkerconcentraties gemeten. Ook heb ik incubatie-experimenten uitgevoerd om de broeikasgasproductie in ontdooiende permafrost te kwantificeren. Mijn onderzoek wijst uit dat de biomarkerproxies nuttig zijn bij het vaststellen van de bron van het OM en om onderscheid te kunnen maken tussen OM van landplanten, waterplanten en OM afkomstig van microbiële activiteit. Daarnaast heb ik aangetoond dat sommige proxies nuttig zijn om de mate van degradatie van het OM vast te stellen, vooral in combinatie met sedimentologische data in een multi-proxy-benadering. Het blijkt dat het OM in Yedoma over het algemeen beter bewaard gebleven is dan het OM in ontdooide Yedoma-sedimenten. De broeikasgasproductie bleek het hoogst in de voor het eerst ontdooide permafrostsedimenten, wat betekent dat de bevroren Yedoma-sedimenten het meeste labiele OM bevatten. Bovendien heb ik aangetoond dat de methaan-producerende gemeenschappen zich wel in de recentelijk ontdooide sedimenten hebben gevestigd, maar nog niet in de nog bevroren sedimenten. Mijn onderzoek heeft de eerste moleculaire biomarker- en koolstofomzetdata en inzichten opgeleverd in de toestand en processen van diepe, bevroren en ontdooide Yedoma-sedimenten. Deze resultaten tonen de relevantie van het bestuderen van OM in diepe permafrostsedimenten. KW - permafrost sediments KW - organic matter KW - molecular biomarkers KW - anaerobic incubation experiments KW - Russian Arctic KW - Permafrostsedimente KW - organisches Material KW - molekulare Biomarker KW - anaerobe Inkubationensexperimente KW - russische Arktis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-564911 ER - TY - THES A1 - Dubinovska, Daria T1 - Optical surveys of AGN and their host galaxies T1 - Optische Durchmusterungen von aktiven Galaxienkernen und ihren Muttergalaxien N2 - This thesis rests on two large Active Galactic Nuclei (AGNs) surveys. The first survey deals with galaxies that host low-level AGNs (LLAGN) and aims at identifying such galaxies by quantifying their variability. While numerous studies have shown that AGNs can be variable at all wavelengths, the nature of the variability is still not well understood. Studying the properties of LLAGNs may help to understand better galaxy evolution, and how AGNs transit between active and inactive states. In this thesis, we develop a method to extract variability properties of AGNs. Using multi-epoch deep photometric observations, we subtract the contribution of the host galaxy at each epoch to extract variability and estimate AGN accretion rates. This pipeline will be a powerful tool in connection with future deep surveys such as PANSTARS. The second study in this thesis describes a survey of X-ray selected AGN hosts at redshifts z>1.5 and compares them to quiescent galaxies. This survey aims at studying environments, sizes and morphologies of star-forming high-redshift AGN hosts in the COSMOS Survey at the epoch of peak AGN activity. Between redshifts 1.51.5 to date. We analyzed the evolution of structural parameters of AGN and non-AGN host galaxies with redshift, and compared their disturbance rates to identify the more probable AGN triggering mechanism in the 43.5 1.5, um sie mit inaktiven Galaxien zu vergleichen. Ziel ist, bei sternbildenden, hochrotverschobenen AGN-Muttergalaxien aus der COSMOS-Durchmusterung die Umgebung, Grösse und Morphologie zum Zeitpunkt der stärksten AGN Aktivität zu studieren. Die COSMOS-HST/ACS-Photometrie untersucht den ultravioletten Spektralbereich von Muttergalaxien bei einer Rotverschiebung von 1.5 < z < 3.8, wo es sehr schwierig ist, den Flussbeitrag des AGN von dem der Muttergalaxie zu trennen. Dennoch gelang es uns, mittels zweidimensionaler Modellierung der Flächenhelligkeitprofile Struktureigenschaften für 249 AGN-Muttergalaxien aus der COSMOS-Durchmusterung abzuleiten. Dies ist für AGN-Muttergalaxien mit einer Rotverschiebung z > 1.5 die bislang grösste Stichprobe. Wir haben die Entwicklung der Strukturparameter mit der Rotverschiebung von AGN-Muttergalaxien und Galaxien ohne aktiven Kern analysiert und die Häufigkeit morphologischer Besonderheiten bei diesen beiden Gruppen miteinander verglichen, um die wahrscheinlichste Ursache für AGN-Aktivität für Galaxien im Roentgen-Leuchtkraft-Bereich von 43.5