TY - THES A1 - Kempa, Stefan T1 - Analysen zur Stressantwort von Arabidopsis thaliana unter Schwefelmangelbedingungen : Studien zur Funktion der Dehydroascorbatreduktase in vivo Y1 - 2004 CY - Potsdam ER - TY - THES A1 - Löffler, Frank T1 - Numerical simulations of neutron star - black hole mergers T1 - Computersimulationen von Zusammenstößen eines schwarzen Lochs und eines Neutronensterns N2 - Collisions of black holes and neutron stars, named mixed binaries in the following, are interesting because of at least two reasons. Firstly, it is expected that they emit a large amount of energy as gravitational waves, which could be measured by new detectors. The form of those waves is expected to carry information about the internal structure of such systems. Secondly, collisions of such objects are the prime suspects of short gamma ray bursts. The exact mechanism for the energy emission is unknown so far. In the past, Newtonian theory of gravitation and modifications to it were often used for numerical simulations of collisions of mixed binary systems. However, near to such objects, the gravitational forces are so strong, that the use of General Relativity is necessary for accurate predictions. There are a lot of problems in general relativistic simulations. However, systems of two neutron stars and systems of two black holes have been studies extensively in the past and a lot of those problems have been solved. One of the remaining problems so far has been the use of hydrodynamic on excision boundaries. Inside excision regions, no evolution is carried out. Such regions are often used inside black holes to circumvent instabilities of the numerical methods near the singularity. Methods to handle hydrodynamics at such boundaries have been described and tests are shown in this work. One important test and the first application of those methods has been the simulation of a collapsing neutron star to a black hole. The success of these simulations and in particular the performance of the excision methods was an important step towards simulations of mixed binaries. Initial data are necessary for every numerical simulation. However, the creation of such initial data for general relativistic situations is in general very complicated. In this work it is shown how to obtain initial data for mixed binary systems using an already existing method for initial data of two black holes. These initial data have been used for evolutions of such systems and problems encountered are discussed in this work. One of the problems are instabilities due to different methods, which could be solved by dissipation of appropriate strength. Another problem is the expected drift of the black hole towards the neutron star. It is shown, that this can be solved by using special gauge conditions, which prevent the black hole from moving on the computational grid. The methods and simulations shown in this work are only the starting step for a much more detailed study of mixed binary system. Better methods, models and simulations with higher resolution and even better gauge conditions will be focus of future work. It is expected that such detailed studies can give information about the emitted gravitational waves, which is important in view of the newly built gravitational wave detectors. In addition, these simulations could give insight into the processes responsible for short gamma ray bursts. N2 - Zusammenstöße eines schwarzen Lochs und eines Neutronensterns, im Folgenden "gemischte Zusammenstöße" genannt, sind aus wenigstens zwei Gründen interessant. Erstens wird erwartet, dass dabei große Mengen Energie als Gravitationswellen freigesetzt werden und diese mit neuen Detektoren gemessen werden können. Die Form dieser Wellen verrät viel über die Beschaffenheit eines solchen Systems und stellt neben elektromagnetischen Wellen eine wichtige Informationsquelle dar. Zweitens sind Zusammenstöße von kompakten Objekten wie Neutronensternen und schwarze Löchern sehr wahrscheinlich die Ursache sogenannter kurzer Gammastrahlungsblitze. Deren genauer Mechanismus für die Umwandlung der gewaltigen Energiemengen, die bei diesen Blitzen ausgesandt werden, ist jedoch bisher unbekannt. Computersimulationen von Zusammenstößen eines gemischten Systems wurden bisher oft unter Benutzung der Newtonschen Gravitationstheorie, bzw. Korrekturen dazu, durchgeführt. In der Nähe so kompakte Objekte wie schwarzer Löcher oder Neutronensterne ist jedoch die Gravitationswirkung so stark, dass Näherungen wie die erwähnten Korrekturen der Newtonschen Gravitationstheorie zu ungenau sind. Eine Benutzung der allgemeinen Relativitätstheorie ist daher für dieses Problem unumgänglich. Die Probleme allgemein-relativistischer Simulationen sind vielfältig. Jedoch wurden Binärsysteme zweier schwarzer Löcher und zweier Neutronensterne schon eingehend untersucht, und so viele Probleme, die auch Simulationen gemischter Systeme betreffen, gelöst. Eins der bisher ausstehenden Probleme war die Behandlung der Hydrodynamik an Ausschneiderändern; Rändern zu Gebieten, die in der Zeitentwicklung der Simulation ignoriert werden. Solche Ränder werden zum Beispiel innerhalb eines schwarzen Lochs benutzt, um Instabilitäten des Programms in der Nähe der Singularität zu vermeiden. Methoden, solche Ränder zu behandeln wurden in der Arbeit entwickelt, getestet und gezeigt, dass sie verlässlich arbeiten. Ein wichtiger Test für diese Methoden, der gleichzeitig der Gewinnung neuer Erkenntnisse diente, war deren Anwendung auf Simulationen von zu schwarzen Löchern kollabierenden, rotierenden Sternen. Der Erfolg, diese Simulationen ohne Probleme mit den erwähnten Methoden durchzuführen, war ein wichtiger Schritt zu Simulationen gemischter Binärsysteme. Für Computersimulationen sind Anfangsdaten notwendig, die das gewünschte Problem beschreiben. Die Erstellung solcher Anfangsdaten ist jedoch unter Benutzung der allgemeinen Relativitätstheorie ausser in Spezialfällen sehr komplex. Wir zeigen, wie man einen schon vorhandenen Algorithmus für Anfangsdaten für zwei schwarze Löcher ändern kann, um Anfangsdaten für ein gemischtes Binärsystem zu erhalten. Diese Anfangsdaten wurden für Simulationen eines gemischten Binärsystems benutzt. Während dieser Simulationen traten mehrere Probleme auf. Zwei dieser Probleme waren numerische Instabilitäten unterschiedlicher Herkunft. Beide konnten jedoch mit angepasst starker Dissipation (der künstliche Entnahme von hochfrequenter Energie aus dem System) unterdrückt werden. Ein weiteres Problem war die erwartete Bewegung des schwarzen Lochs in Richtung des Neutronensterns. Da ein Teil des Simulationsgebietes innerhalb des schwarzen Lochs ausgeschnitten wird und das verwendete Programm bewegte Ausschneidegebiete nicht behandeln kann, darf sich das schwarze Loch jedoch auf dem Gitter kaum bewegen. Wir haben dieses Problem durch eine an das Problem angepasste Eichbedingung gelöst, die auf Bewegungen des scheinbaren Horizons reagiert und die Position des schwarzen Lochs auf diese Weise nahezu konstant hält. Die Methoden und Simulationen dieser Arbeit sind nur der Anfangspunkt einer ausführlichen Studie von Binärsystemen eines schwarzen Lochs und eines Neutronensterns. Bessere Methoden, Modelle und Simulationen mit höherer Auflösung und besser an das System angepassten Koordinaten werden Mittelpunkt zukünftiger Arbeit sein. Es wird erwartet, dass solche detailierten Studien Erkenntnisse über die abgestrahlten Gravitationswellen liefern, die gerade in Hinblick auf die neuen Gravitationswellendetektoren wichtig sind. Weiterhin könnten diese Simulationen dabei helfen, die Prozesse, die kurze Gammastrahlungsblitze hervorrufen, und über die im Moment kaum etwas bekannt ist, aufzuklären. KW - Relativistische Astrophysik KW - Neutronensterne KW - schwarze Löcher KW - neutron stars KW - black holes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7743 ER - TY - THES A1 - Unterstab, Gunhild T1 - Charakterisierung der viralen Genprodukte p10 und P des Borna Disease Virus T1 - Characterization of the viral gene products p10 and P of the Borna disease virus N2 - Das Borna Disease Virus (BDV, Bornavirus) besitzt ein einzelsträngiges RNA-Genom negativer Polarität und ist innerhalb der Ordnung Mononegavirales der Prototyp einer eigenen Virusfamilie, die der Bornaviridae. Eine außergewöhnliche Eigenschaft des Virus ist seine nukleäre Transkription und Replikation, eine weitere besteht in seiner Fähigkeit, als neurotropes Virus sowohl in vivo als auch in vitro persistente Infektionen zu etablieren. Die zugrunde liegenden Mechanismen sowohl der Replikation als auch der Persistenz sind derzeit noch unzureichend verstanden, auch deshalb, weil das Virus noch relativ „jung“ ist: Erste komplette Sequenzen des RNA-Genoms wurden 1994 publiziert und erst vor einigen Monaten gelang die Generierung rekombinanter Viren auf der Basis klonierter cDNA. Im Mittelpunkt dieser Arbeit standen das p10 Protein und das Phosphoprotein (P), die von der gemeinsamen Transkriptionseinheit II in überlappenden Leserahmen kodiert werden. Als im Kern der Wirtszelle replizierendes Virus ist das Bornavirus auf zelluläre Importmechanismen angewiesen, um den Kernimport aller an der Replikation beteiligten viralen Proteine zu gewährleisten. Das p10 Protein ist ein negativer Regulator der viralen RNA-abhängigen RNA-Polymerase (L). In vitro Importexperimente zeigten, dass p10 über den klassischen Importin alpha/beta abhängigen Kernimportweg in den Nukleus transportiert wird. Dies war unerwartet, da p10 kein vorhersagbares klassisches Kernlokalisierungssignal (NLS) besitzt und weist darauf hin, dass der zelluläre Importapparat offensichtlich flexibler ist als allgemein angenommen. Die ersten 20 N-terminalen AS vermitteln sowohl Kernimport als auch die Bindung an den Importrezeptor Importin alpha. Durch Di-Alanin-Austauschmutagenese wurden die für diesen Transportprozess essentiellen AS identifiziert und die Bedeutung hydrophober und polarer AS-Reste demonstriert. Die Fähigkeit des Bornavirus, persistente Infektionen zu etablieren, wirft die Frage auf, wie das Virus die zellulären antiviralen Abwehrmechanismen, insbesondere das Typ I Interferon (IFN)-System, unterwandert. Das virale P Protein wurde in dieser Arbeit als potenter Antagonist der IFN-Induktion charakterisiert. Es verhindert die Phosphorylierung des zentralen Transkriptionsfaktors IRF3 durch die zelluläre Kinase TBK1 und somit dessen Aktivierung. Der Befund, dass P mit TBK1 Komplexe bildet und zudem auch als Substrat für die zelluläre Kinase fungiert, erlaubt es, erstmalig einen Mechanismus zu postulieren, in dem ein virales Protein (BDV-P) als putatives TBK1-Pseudosubstrat die IRF3-Aktivierung kompetitiv hemmt. N2 - The Borna Disease Virus (BDV) harbors a single stranded RNA genome of negative polarity. Within the order of Mononegavirales it is the prototype of a new virus family named Bornaviridae. Unique features of this neurotrope virus are its nuclear transcription and replication as well as its ability to establish persistent infections both in vivo and in vitro. The underlying mechanisms of BDV replication and persistence are currently not well understood amongst others due to the fact that BDV is quite a young virus: First complete sequences of the RNA genome have been published in 1994. Only a few months ago the generation of a recombinant Bornavirus from cloned cDNA has been accomplished. The work presented here focused on the viral p10 protein and the phosphoprotein P that are both encoded by two overlapping reading frames of the transcription unit II. Nuclear replication of the Bornavirus relies on cellular import mechanisms to allow for nuclear import of viral proteins involved in viral replication. The p10 protein has been described as a negative regulator of the viral RNA dependent RNA polymerase (L). In vitro import experiments revealed that p10 translocates into the nucleus via the classical importin alpha/beta; dependent pathway. This was unexpected since p10 does not contain a predictable classical nuclear localization signal (NLS) suggesting that the cellular import machinery is more flexible than generally believed. The first 20 amino acids mediate nuclear import and binding to the import receptor importin alpha. Analysis of di-alanine-exchange mutants identified essential amino acids and furthermore revealed the impact of hydrophobic and polar side chains in receptor binding and nuclear import. The ability of the Bornavirus to establish persistent infections rises the question of how the virus circumvents cellular antiviral defense mechanisms, in particular the type I interferon system. This work characterizes the viral P protein as a potent antagonist of IFN beta induction. It prevents the activation of the central transcription factor IRF3 by interfering with the cellular kinase TBK1. The finding that P forms complexes with TBK1 and moreover serves as a kinase substrate allows to postulate a mechanism for the first time, in which a viral protein (BDV-P) acts as a putative TBK1 pseudo-substrate and thereby competitively inhibits IRF3 activation. KW - Interferon KW - Borna Disease Virus KW - Kernlokalisierungssignal KW - Importin KW - IRF3 KW - TBK1 KW - Borna disease virus KW - nuclear localization signal KW - importin KW - IRF3 KW - TBK1 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6905 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Kugel, Rudolf T1 - Ein Beitrag zur Problematik der Integration virtueller Maschinen T1 - A contribution to the problem of integrating virtual machines N2 - Moderne Softwaresysteme sind komplexe Gebilde, welche häufig im Verbund mit anderen technischen und betriebswirtschaftlichen Systemen eingesetzt werden. Für die Hersteller solcher Systeme stellt es oft eine große Herausforderung dar, den oft weit reichenden Anforderungen bezüglich der Anpassbarkeit solcher Systeme gerecht zu werden. Zur Erfüllung dieser Anforderungen hat es sich vielfach bewährt, eine virtuelle Maschine in das betreffende System zu integrieren. Die Dissertation richtet sich insbesondere an Personen, die vor der Aufgabe der Integration virtueller Maschinen in bestehende Systeme stehen und zielt darauf ab, solche für die Entscheidung über Integrationsfragen wichtigen Zusammenhänge klar darzustellen. Typischerweise treten bei der Integration einer virtuellen Maschine in ein System eine Reihe unterschiedlicher Problemstellungen auf. Da diese Problemstellungen oft eng miteinander verzahnt sind, ist eine isolierte Betrachtung meist nicht sinnvoll. Daher werden die Problemstellungen anhand eines zentral gewählten, sehr umfangreichen Beispiels aus der industriellen Praxis eingeführt. Dieses Beispiel hat die Integration der "Java Virtual Machine" in den SAP R/3 Application Server zum Gegenstand. Im Anschluss an dieses Praxisbeispiel wird die Diskussion der Integrationsproblematik unter Bezug auf eine Auswahl weiterer, in der Literatur beschriebener Integrationsbeispiele vertieft. Das Hauptproblem bei der Behandlung der Integrationsproblematik bestand darin, dass die vorgefundenen Beschreibungen, der als Beispiel herangezogenen Systeme, nur bedingt als Basis für die Auseinandersetzung mit der Integrationsproblematik geeignet waren. Zur Schaffung einer verwertbaren Diskussionsgrundlage war es daher erforderlich, eine homogene, durchgängige Modellierung dieser Systeme vorzunehmen. Die Modellierung der Systeme erfolgte dabei unter Verwendung der "Fundamental Modeling Concepts (FMC)". Die erstellten Modelle sowie die auf Basis dieser Modelle durchgeführte Gegenüberstellung der unterschiedlichen Ansätze zur LÖsung typischer Integrationsprobleme bilden den Hauptbeitrag der Dissertation. Im Zusammenhang mit der Integration virtueller Maschinen in bestehende Systeme besteht häufig der Bedarf, zeitgleich mehrere "Programme" durch die integrierte virtuelle Maschine ausführen zu lassen. Angesichts der Konstruktionsmerkmale vieler heute verbreiteter virtueller Maschinen stellt die Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" eine große Herausforderung dar. Die Darstellung des Spektrums an Maßnahmen zur Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" bildet einen zweiten wesentlichen Beitrag der Dissertation. N2 - Modern software systems are complex entities which are frequently linked to other technical and economic systems. For the manufacturers of such systems it often represents a big challenge to fulfill the demanding requirements concerning the adaptability of such systems. One possible way to meet the demands is to integrate a virtual machine into the system concerned. This thesis is primarily intended to be used by persons who intend to integrate a virtual machine into an existing system. The primary goal is to pinpoint those dependencies which are important for decisions about integration questions. The integration of a virtual machine into an existing system is typically accompanied by many different problems. Since these problems are often closely interconnected, it often makes no sense to treat them individually. Therefore, the problems are introduced along with an adequately chosen, complex real life example. This example deals with the integration of the "Java Virtual Machine" into the "SAP R/3" application server. Following this practical example, the discussion of integration problems is deepened by presenting an assortment of additional examples taken from the literature. The main problem encountered during the treatment of the integration process was caused by inadequate and incomparable descriptions of the samples used. The existing descriptions were therefore unsuitable as a basis of discussion for the integration topic. For a useful discussion, it was necessary to prepare a uniform and sound modeling of these systems. This was done by adopting the "Fundamental Modeling Concepts (FMC)" technique. The created models as well as the comparison of the different approaches that can be used to solve typical integration problems form the main contribution of the thesis. The integration of virtual machines into existing systems is frequently accompanied by the requirement to have the integrated virtual machine process several "programs" simultaneously. In view of the design features of many common virtual machines, the realization of a virtual machine integration that allows the integrated virtual machine to be operated in "multiprogram" mode is still challenging. The most challenging task in this context is the problem of keeping the resource usage of the system at a tolerable level. A comparison of measures that can be taken to reduce the resource usage of an integrated virtual machine that can be operated in "multiprogram" mode forms a second essential contribution of the thesis. KW - Virtuelle Maschine KW - VM KW - Java Virtual Machine KW - Java 2 Enterprise Edition KW - IBM 360 KW - VM Integration KW - Application Server KW - Fundamental Modeling Concepts KW - PAVM Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7195 ER - TY - THES A1 - Gürtler, Christine T1 - Soziale Ungleichheit unter Kindern : über die Rolle von Kind- und Elternhausmerkmalen für die Akzeptanz und den Einfluss eines Kindes in seiner Schulklasse T1 - Social Inequality among children : the role of child- and parental attributes for the acceptance and the influence of children in their school-classes N2 - Ziel der Studie war die Untersuchung individueller und familialer Faktoren für den sozialen Status eines Kindes in seiner Schulklasse. Durch die Unterscheidung von Akzeptanz und Einfluss als zweier Hauptdimensionen des sozialen Status konnte die Arbeit aufklären, welche Rolle verschiedene Attribute für das Erreichen von Akzeptanz oder Einfluss spielen. 234 Dritt- und Fünftklässler aus Berliner Grundschulen erhielten soziometrische Maße, durch welche der soziale Status erhoben wurde (Akzeptanz und Einfluss). Individuelle und familiale Faktoren wurden mittels Peernominationen über das Verhalten der Kinder (Fremdurteil), Schulnoten (Lehrerangabe)und Maße des sozio-ökonomischen Status der Eltern (Elternangabe)erhoben. Die Ergebnisse zeigen, dass Akzeptanz positiv mit prosozialem und negativ mit aggressivem Verhalten eines Kindes assoziiert ist. Die Zusammenhänge dieser Verhaltensweisen mit Einfluss wiesen in dieselbe Richtung, waren aber deutlich geringer. Ideenreichtum und Humor hingen mit Akzeptanz und Einfluss gleichermaßen positiv zusammen, sowie Traurigsein gleichermaßen negativ mit beiden Statusdimensionen verbunden war. Das Verhalten eines Kindes vermittelte den Zusammenhang zwischen Merkmalen wie Geschlecht, relativem Alter, Schulnoten und der Akzeptanz und dem Einfluss eines Kindes. Zum Beispiel war die positive Beziehung zwischen Schulnoten und dem sozialen Status überwiegend auf die mit(guten)Schulnoten assoziierten Verhaltensweisen Prosozialität und (geringe) Aggressivität zurückzuführen. Die größere Akzeptanz von Mädchen ließ sich ebenso durch deren größere Prosozialität und geringere Aggressivität erklären. Jungen waren im Hinblick auf ihren Einfluss sowohl am oberen als auch am unteren Ende der Hierarchie überrepräsentiert. Sowohl sehr einflussreiche als auch einflusslose Jungen zeichneten sich durch eine erhöhte Aggressivität aus. Komplexere Analysen wiesen daraufhin, dass Jungen negative Auswirkungen von aggressivem Verhalten durch Humor und Ideenreichtum auf ihren Status kompensieren konnten. Der moderate Zusammenhang zwischen dem elterlichen sozioökonomischen Status und dem sozialen Status des Kindes wurde vollständig durch das Verhalten des Kindes mediiert. Das Elternhaus war wichtiger für die Akzeptanz als für den Einfluss eines Kindes. Kinder mit Migrationshintergrund waren sowohl weniger akzeptiert als auch weniger einflussreich in ihrer Klasse. Elterliche Trennung trug nicht zur sozialen Position eines Kindes bei. N2 - The goal of this study was to investigate individual and familial factors contributing to a child’s social status in its schoolclass. Separating acceptance and influence as two main dimensions of social status, this work aims at clarifying the impact of different attributes for becoming accepted or influential. 234 third and fifth grade children from Berlin schools were administered sociometric measures providing information about social status (acceptance and influence). The contributing factors where measured using peer nominations of each child’s behaviour, school-grades and familial variables such as the parents’ socio-economic status. Results show that acceptance was positively linked to prosocial and negatively linked to aggressive behaviour. Pointing in the same direction, influence was less related to aggression and prosociality than acceptance. Having ideas and a sense of humour contributed positively and being sad contributed negatively to both dimensions of social status. Furthermore, behavioural tendencies mediated the impact of non-behavioural attributes such as gender, relative age in class and school-grades on social status. For example, the positive relation between schoolgrades and social status was mainly mediated by prosocial and non-aggressive behaviour. Looking at gender, girls were more prosocial and less aggressive than boys and therefore more accepted than the latter. Within their class boys were more often represented at both ends of the influence dimension than girls. Moreover highly influential as well as powerless boys were found to be rather aggressive. More complex analyses showed that boys could possibly compensate the negative impact of aggression with humour and ideas. The moderate relation between parental SES and a child’s socials status was fully mediated by a child’s behaviour. SES was more important for the acceptance than for the influence of a child. Children with a migration background were both less accepted and influential. Parental separation did not contribute to a child’s social position. KW - Soziale Ungleichheit KW - Soziometrie KW - Macht KW - Gleichaltrigenbeziehungen KW - Sozialer Status KW - Popularity KW - Power KW - Sociometry KW - Social Status KW - peer relations Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16797 ER - TY - THES A1 - Schauer, Nicolas T1 - Quantitative trait loci (QTL) for metabolite accumulation and metabolic regulation : metabolite profiling of interspecific crosses of tomato T1 - Metabolomische Analyse von interspezifischen Tomaten N2 - The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample. Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of S. pennellii introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation. N2 - Die Einführung von Hochdurchsatzmethoden zur Analyse von biologischen Systemen, sowie die umfangreiche Sequenzierung von Genomen haben zu einer Verlagerung der Forschung „im Detail“ zu einer ganzheitlicheren Betrachtungsweise auf Systemebene geführt. Aus einer jahrhundertlangen, intensiven Züchtung und Selektion von Nutzpflanzen resultierte gleichzeitig eine Abnahme der genetischen Varianz. Daraus resultierend sind Nutzpflanzen anfälliger gegenüber Stressfaktoren, wie Pathogenen, hohen Salzkonzentrationen oder Trockenheit, als ihre Wildarten. Das Potential konventioneller Züchtung scheint somit heute an seine Grenzen gekommen zu sein. Daher versucht man mittels moderner Molekulartechnik, wie zum Beispiel Marker-gestützte Selektion, Gene oder ganze Genombereiche von Wildarten mit hoher genetischer Variation in Nutzpflanzen einzukreuzen, vornehmlich mit dem Ziel einer Ertrags- bzw. Resistenzsteigerung. Neueste medizinische Studien belegen, dass die Ernährung eine wesentliche Rolle für die menschliche Gesundheit spielt. Besonders wichtig sind hierbei die gesundheitsfördernden Substanzen in pflanzlichen Nahrungsmitteln. Aus diesem Grund kommt der Erforschung der biochemischen Zusammensetzung von biologischen Proben eine immer größere Bedeutung zu. Diese Untersuchung kann elegant durch Metabolitenprofile, welche die multivariate Analyse komplexer biologischer Proben erlauben, durchgeführt werden. In dieser Arbeit wurde zur Untersuchung der biochemischen Zusammensetzung von Tomatenwildarten und interspezifischen S. pennellii Tomatenintrogressionslinien (IL) eine GC/MS basierte Metabolitenanalyseplattform verwendet. Hierzu war es zunächst notwendig eine Massenspektrenbibliothek, zur Annotierung von Massenspektren und Retentionsindices von, in pflanzlichen Proben vorkommenden, Metaboliten anzulegen. Die Analyse der Tomatenwildarten ergab große Unterschiede gegenüber der Kulturtomate im Hinblick auf den Gehalt an Amino- und organischen Säuren, sowie der Zuckerzusammensetzung und den Gehalt an Sekundärmetaboliten. Die darauf folgende Analyse der ILs, von den jede ein genau definiertes genomisches Segment von S. pennellii beinhaltet, bestätigte diese enorme Variation mit 889 metabolischen und 326 ertragsassozierten-Veränderungen in den ILs. Die metabolischen Veränderungen zeichneten sich durch abnehmende bzw. steigende Gehalte von einzelnen Metaboliten, aber auch durch eine koordinierte Änderung aus. In dieser Arbeit wurde weiterhin der Biosyntheseweg der Volatilenstoffe Phenylethanol und Phenylacetaldehyd mit Hilfe einer IL untersucht. Hierbei konnten durch stabile Isotopenmarkierung und eines „reverse genetics“-Ansatzes Gene bzw. Enzyme identifiziert werden, die für die Dekarboxylierung des Eduktes Phenylalanin verantwortlich sind. Diese Arbeit beschreibt erstmals die umfassende Analyse von biochemischen Komponenten auf Genombasis in Tomatenintrogressionslinien und zeigt damit ein Werkzeug auf zur Identifizierung von qualitativen biochemischen Merkmalen in der modernen molekularen Züchtung. KW - Tomate KW - Metabolit KW - GC-MS KW - Introgression KW - Frucht KW - Metabolome KW - Züchtung KW - metabolic genomics KW - Tomato KW - metabolite profiling KW - metabolome KW - breeding KW - crops KW - fruit KW - metabolite breeding KW - metabolic genomics Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7643 ER - TY - THES A1 - Fritz, Christina T1 - Der Einfluß des primären Stickstoffstoffwechsels auf den Aminosäure- und Sekundärstoffwechsel in Nicotiana tabacum L. T1 - The impact of primary nitrogen metabolism on amino acid and secondary metabolism in Nicotiana tabacum L. N2 - Es ist bekannt, dass Änderungen im Kohlenstoff- bzw. Stickstoffstaus der Pflanzen zu einer parallelen statt reziproken Änderung der kohlenstoff- und stickstoffhaltigen Primärmetabolite führen. Unter diesem Gesichtspunkt wurden in der vorliegenden Arbeit der Aminosäurestoffwechsel und der Sekundärstoffwechsel unter reduzierten Stickstoffbedingungen untersucht. Zur Beeinflussung des Stickstoffstoffwechsels wurden nitratmangelernährte Tabakwildtyppflanzen und Genotypen mit unterschiedlich stark reduzierter Nitratreduktase-Aktivität verwendet. Dieses experimentelle System erlaubt zusätzlich durch den Vergleich Nitrat defizienter Wildtyppflanzen mit Nitrat akkumulierenden NIA-Transformanten Prozesse zu identifizieren, die durch Nitrat gesteuert werden. Die Analysen der Primär- und Sekundärmetabolite wurde in allen Genotypen diurnal durchgeführt, um auch tageszeitlich abhängige Prozesse zu identifizieren. Die Analyse der absoluten Gehalte aller individuellen Aminosäuren enthüllte bei den meisten erstaunlich stabile diurnale Muster mit einem Anstieg während des Tages und einem Abfall in der Nacht in Wildtyppflanzen gewachsen mit ausreichend Nitrat. Dieses Ergebnis legt die Schlussfolgerung nahe, dass die Biosynthese der Aminosäuren koordiniert abläuft. In Pflanzen mit reduziertem Stickstoffstatus haben diese diurnalen Muster jedoch keinen Bestand. Die Kombination des erzeugten stickstoffbasierten Aminosäuredatensatz in Kombination mit einem bereits erzeugten Aminosäuredatensatz unter kohlenstofflimitierten Bedingungen von Matt et al. (2002) führte durch Hauptkomponentenanalyse (PCA) und Korrelationsanalyse zu dem Ergebnis, dass die Hypothese nach einer koordinierten Aminosäurebiosynthese nicht allgemeine Gültigkeit hat. Die PCA identifizierte Glutamin, Glutamat, Aspartat, Glycin, Pheny-lalanin und Threonin als Faktoren, die den Datensätzen ihre charakteristische Eigenschaft und deren Varianz verleihen. Die Korrelationsanalyse zeigte, dass die sehr guten Korrelationen der individuellen Aminosäuren untereinander in reduzierten Stickstoff- und Kohlenstoffbedingungen sich verschlechtern. Das Verhältnis einer einzelnen Aminosäure relativ zu den anderen führte zur Identifizierung einiger Aminosäuren, die individuelle Antworten auf Stickstoff- und/oder Kohlenstoffstatus zeigen, und/oder speziell auf Nitrat, Licht und/oder den E-nergiestatus der Thylakoidmembran. Glutamat beispielsweise verhält sich in den meisten Situationen stabil, Phenylalanin dagegen zeigt in jeder physiologischen Situation eine individuelle Antwort. Die Ergebnisse dieser Arbeit führen zu einer Erweiterung der Hypothese einer koordinierten Synthese der Aminosäuren dahingehend, dass diese nicht generell für alle Aminosäuren angenommen werden kann. Es gibt einige Aminosäuren deren, Anteile sich situationsbedingt anpassen. Die Reduktion des Stickstoffstatus in nitratmangelernährten Tabakwildtyppflanzen führte zu der, nach der „Carbon-Nutrient-Balance“ Hypothese erwarteten Verlagerung der kohlenstoffreichen Phenylpropanoide und des stickstoffreichen Nikotins. Die Erhöhung der Phenylpropanoidgehalte war nicht in der Nitrat akkumulierenden NIA-Transformante zu beobachten und somit konnte Nitrat als regulatorisches Element identifiziert werden. Ein Einfluss der Vorläufermetabolite konnte ausgeschlossen werden, da sowohl nitratmangelernährter Wildtyp als auch die Nitrat akkumulierende NIA-Transformante ähnliche Gehalte dieser aufwiesen. Genexpressionsanalysen über Mikroarray-Hybridisierung und quantitative RT-PCR zeigten, dass Nitrat durch noch nicht geklärte Mechanismen Einfluss auf die Expression einiger Gene nimmt, die dem Phenylpropanoidstoffwechsels zugeordnet sind. Aus der Arbeit hervorgegangene Veröffentlichungen: Christina Fritz, Natalia Palacios-Rojas, Regina Feil und Mark Stitt (2006) Regulation of Secondary Metabolism by the Carbon-Nitrogen Status in Tobacco: Nitrate Inhibits Large Sectors of Phenylpropanoid Metabolism. Plant Journal 46, 533 - 548 Christina Fritz, Petra Matt, Cathrin Müller, Regina Feil und Mark Stitt (2006) Impact of the Carbon-Nitrogen Status on the Amino Acid Profile in Tobacco Source Leaves. Plant, Cell and Environment 29 (11), 2009 - 2111 N2 - It is known that changes in carbon and nitrogen status of a plant lead to parallel rather than reciprocal changes of carbon and nitrogen containing primary metabolites. Based on this finding the influence of carbon and nitrogen status on the amino acid profile as well as on secondary metabolism was investigated in tobacco. Manipulations of the nitrogen status were carried out in two ways: Tobacco wild type plants were cultivated in nitrogen-replete and nitrogen starved conditions; in addition nitrate accumulating transformants with reduced nitrate reductase (NIA) activity were used. The comparison of the nitrate starved wild type and the nitrate accumulating NIA-transformant allows to distinguish processes which were driven by the nitrogen status of a plant or by nitrate itself. Due to the fact that most primary metabolites have diurnal changes the analysis of primary and secondary metabolites were done at six different time points per day in order to identify diurnal processes. Analysis of the absolute levels of individual amino acids under normal nitrogen supply conditions reveals characteristic diurnal patterns for the majority of amino acids with an increase during the day and a decrease during the night. This result indicates that amino acid biosynthesis might be coordinated. However these diurnal patterns are no longer stable in plants with reduced nitrogen status; furthermore absolute levels of individual amino acids differed over a wide range of concentrations. The hypothesis of a coordinated regulation of amino acid metabolism was further tested by combining this dataset with an amino acid dataset produced under carbon limited conditions (Matt et al., 2002) and applying Principal Component Analysis (PCA) and correlation analysis. Glutamine, glutamate, aspartate, glycine, phenylalanine and threonine were responsible for the clear separation of the different genotypes and experimental conditions in the PCA plot. The data from the correlation analysis show that most of the minor amino acids have very good correlations under carbon and nitrogen sufficient conditions. These correlations became weaker with decreasing carbon and nitrogen status of the plants. These results clearly indicate that a coordinated biosynthesis of amino acids is not a general phenomenon. Comparing the levels of each individual amino acid to the total amino acid pool revealed specific answers of a particular amino acid to carbon and/or nitrogen status, to nitrate and/or light and to energy status of the thylakoid membrane. Glutamate for instance is remarkably stable in most of the conditions and phenylalanine shows an individual response in every situation. From these results it was concluded that the hypothesis of a coordinated biosynthesis of amino acids might be true for some amino acids, but clearly needs to be extended because some amino acids adjust their levels in an individual fashion depending on the external conditions. The reduction of nitrogen status of nitrate starved wild type plants leads to a shift from carbon-rich phenylpropanoids to nitrogen-rich nicotine as predicted by the “carbon-nutrient-balance hypothesis”. Increased phenylpropanoids were not observed in nitrate accumulating NIA-transformants. Therefore nitrate could be identified as a regulatory element in phenyl-propanoid metabolism. A regulatory influence of precursors could be excluded since nitrate starved wild type and NIA-transformant had similar levels. Genexpression analysis via microarry hybridisation and quantitative RT-PCR shows that nitrate acts a transcriptional regulator of genes involved in phenylpropanoid metabolism. The elucidation of this regulatory role of nitrate requires further investigation. KW - Nitrat KW - Aminosäuren KW - sekundäre Pflanzenstoffe KW - Stickstoff KW - Tabak KW - nitrate KW - amino acids KW - plant secondary metabolites KW - nitrogen KW - tobacco Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13322 ER - TY - THES A1 - Meinke, Anja T1 - Nikotineffekte auf räumliche Aufmerksamkeitsprozesse bei Nichtrauchern T1 - Effects of nicotine on visual attention in non-smokers N2 - Nikotin in den unterschiedlichsten Darreichungsformen verringert bei verschiedenen Spezies im räumlichen Hinweisreizparadigma die Kosten invalider Hinweisreize. Welcher Teilprozess genau durch Nikotin beeinflusst wird, ist bislang nicht untersucht worden. Die gängige Interpretation ist, daß Nikotin das Loslösen von Aufmerksamkeit von einem bisher beachteten Ort erleichtert. In fünf Studien, drei elektrophysiologischen und zwei behavioralen wurden drei mögliche Mechanismen der Nikotinwirkung an Nichtrauchern untersucht. Experiment 1 und 2 gingen der Frage nach, ob Nikotin eine Modulation sensorischer gain Kontrolle bewirkt. Dazu wurden ereigniskorrelierte Potentiale (EKP) im Posner-Paradigma erhoben und die Wirkung von Nikotin auf die aufmerksamkeitsassoziierten Komponenten P1 und N1 betrachtet. Nikotin verringerte die Kosten invalider Hinweisreize bei Aufmerksamkeitslenkung durch endogene Hinweisreize, nicht aber bei exogenen Hinweisreizen. Die P1 und N1 Komponenten zeigten sich unbeeinflusst von Nikotin, damit findet also die Annahme einer Wirkung auf sensorische Suppression keine Unterstützung. In Experiment 3 und 4 wurde untersucht, ob Nikotin einen Effekt auf kostenträchtige unwillkürliche Aufmerksamkeitsverschiebungen, Distraktionen, hat. In Experiment 3 wurden in einem räumlichen Daueraufmerksamkeitsparadigma Distraktionen durch deviante Stimulusmerkmale ausgelöst und die Wirkung von Nikotin auf eine distraktionsassoziierte Komponente des EKP, die P3a, betrachtet. In Experiment 4 wurde in einem Hinweisreizparadigma durch zusätzliche Stimuli eine Distraktion ausgelöst und die Nikotinwirkung auf die Reaktionszeitkosten untersucht. Nikotin zeigte keinen Einfluss auf Distraktionskosten in beiden Studien und auch keine Wirkung auf die P3a Komponente in Experiment 3. In Experiment 4 wurde zusätzlich die Wirkung von Nikotin auf das Loslösen von Aufmerksamkeit untersucht, indem die Schwierigkeit des Loslösens variiert wurde. Auch hier zeigte sich keine Nikotinwirkung. Allerdings konnte in beiden Studien weder die häufig berichtete generelle Reaktionszeitverkürzung noch die Verringerung der Kosten invalider Hinweisreize repliziert werden, so dass zum Einen keine Aussage über die Wirkung von Nikotin auf Distraktionen oder den Aufmerksamkeitsloslöseprozess gemacht werden können, zum Anderen sich die Frage stellte, unter welchen Bedingungen Nikotin einen differentiellen Effekt überhaupt zeigt. Im letzten Experiment wurde hierzu die Häufigkeit der Reaktionsanforderung einerseits und die zeitlichen Aspekte der Aufmerksamkeitslenkung andererseits variiert und der Effekt des Nikotins auf den Validitätseffekt, die Reaktionszeitdifferenz zwischen valide und invalide vorhergesagten Zielreizen, betrachtet. Nikotin verringerte bei Individuen, bei denen Aufmerksamkeitslenkung in allen Bedingungen evident war, in der Tendenz den Validitätseffekt in der ereignisärmsten Bedingung, wenn nur selten willentliche Aufmerksamkeitsausrichtung notwendig war. Dies könnte als Hinweis gedeutet werden, dass Nikotin unter Bedingungen, die große Anforderungen an die Vigilanz stellen, die top-down Zuweisung von Aufmerksamkeitsressourcen unterstützt. N2 - Nicotine has consistently been shown to improve performance on a range of attentional tasks. In spatial cueing (Posner-type) paradigms, where a cue indicates the likely location of a subsequent target stimulus, nicotine influences the ability to react to invalidly cued targets across different species and ways of administration. Previous research suggested that the cholinergic effect is due to a facilitated disengagemant of attention from the cued location. In five studies with nonsmoking subjects, three candidate mechanisms of nicotinic action were examined. Experiment 1 and experiment 2 investigated whether nicotine modulates attentional processes of sensory gain control. In a Posner-paradigm event-related potentials (ERP) were measured and the effect of nicotine on the attention-related components P1 and N1 was assessed. Behaviorally, nicotine reduced the costs of invalid cueing when cues were endogenous, but not with exogenous cues. Electrophysiologically, the P1 and N1 components were not affected by nicotine. These data provide therefore no support for the notion of a nicotine-modulated attentional suppression. In experiment 3 and 4 the effect of nicotine on involuntary distracting attention shifts was investigated. In experiment 3 ERPs were measured in a spatial sustained attention paradigm, where rare changes in a target stimulus attribute were used as distractors. The effect of nicotine on the distraction-associated P3a component was assessed. In experiment 4 the effect of nicotine on the reaction time costs of additional distracting stimuli was studied in a Posner paradigm. In both studies nicotine did not show an effect on distractions, neither in the reaction time costs nor in the parameters of the P3a component. Experiment 4 also investigated whether nicotine has an effect on the disengagement of attention by varying the difficulty of disengaging one's focus from the cued location. Again, nicotine did not show an effect. However, experiment 3 and 4 also neither replicated the commonly reported general nicotinic reduction of reaction times nor the differential reduction of the costs of invalid cueing. Therefore, regarding the effect of nicotine on distraction and on the disengagement of attention the data remain inconclusive. However, these data suggest that there are conditions and mechanisms moderating nicotinic action, that are still unknown. Accordingly, experiment 5 made the attempt to determine such conditions. Response frequency and temporal characteristics of attention orientation were varied. In individuals, who evidently had shifted their attention, nicotine reduced the validity effect under uneventful conditions, when attention was not to be shifted in each trial. This might suggest that nicotine facilitates the top-down allocation of attentional resources in vigilance-demanding situations. KW - Nicotin KW - Aufmerksamkeit KW - Kognition KW - Acetylcholin KW - Ereigniskorreliertes Potenzial KW - attention KW - nicotine KW - actylcholine KW - cognition KW - event-related potentials Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7659 ER - TY - THES A1 - Hoffmann, Toni T1 - Cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O'Kane and Al'Shehbaz and Arabidopsis thaliana (L.) Heynhold T1 - Klonierung und Charakterisierung des HMA3 Genes und seines Promotors aus Arabidopsis halleri (L.) O'Kane und Al'Shehbaz und Arabidopsis thaliana (L.) Heynhold N2 - Being living systems unable to adjust their location to changing environmental conditions, plants display homeostatic networks that have evolved to maintain transition metal levels in a very narrow concentration range in order to avoid either deficiency or toxicity. Hence, plants possess a broad repertoire of mechanisms for the cellular uptake, compartmentation and efflux, as well as for the chelation of transition metal ions. A small number of plants are hypertolerant to one or a few specific transition metals. Some metal tolerant plants are also able to hyperaccumulate metal ions. The Brassicaceae family member Arabidopis halleri ssp. halleri (L.) O´KANE and AL´SHEHBAZ is a hyperaccumulator of zinc (Zn), and it is closely related to the non-hypertolerant and non-hyperaccumulating model plant Arabidopsis thaliana (L.) HEYNHOLD. The close relationship renders A. halleri a promising emerging model plant for the comparative investigation of the molecular mechanisms behind hypertolerance and hyperaccumulation. Among several potential candidate genes that are probably involved in mediating the zinc-hypertolerant and zinc-hyperaccumulating trait is AhHMA3. The AhHMA3 gene is highly similar to AtHMA3 (AGI number: At4g30120) in A. thaliana, and its encoded protein belongs to the P-type IB ATPase family of integral membrane transporter proteins that transport transition metals. In contrast to the low AtHMA3 transcript levels in A. thaliana, the gene was found to be constitutively highly expressed across different Zn treatments in A. halleri, especially in shoots. In this study, the cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O´KANE and AL´SHEHBAZ and Arabidopsis thaliana (L.) HEYNHOLD is described. Heterologously expressed AhHMA3 mediated enhanced tolerance to Zn and to a much lesser degree to cadmium (Cd) but not to cobalt (Co) in metal-sensitive mutant strains of budding yeast. It is demonstrated that the genome of A. halleri contains at least four copies of AhHMA3, AhHMA3-1 to AhHMA3-4. A copy-specific real-time RT-PCR indicated that an AhHMA3-1 related gene copy is the source of the constitutively high transcript level in A. halleri and not a gene copy similar to AhHMA3-2 or AhHMA3-4. In accordance with the enhanced AtHMA3mRNA transcript level in A. thaliana roots, an AtHMA3 promoter-GUS gene construct mediated GUS activity predominantly in the vascular tissues of roots and not in shoots. However, the observed AhHMA3-1 and AhHMA3-2 promoter-mediated GUS activity in A. thaliana or A. halleri plants did not reflect the constitutively high expression of AhHMA3 in shoots of A. halleri. It is suggested that other factors e. g. characteristic sequence inserts within the first intron of AhHMA3-1 might enable a constitutively high expression. Moreover, the unknown promoter of the AhHMA3-3 gene copy could be the source of the constitutively high AhHMA3 transcript levels in A. halleri. In that case, the AhHMA3-3 sequence is predicted to be highly homologous to AhHMA3-1. The lack of solid localisation data for the AhHMA3 protein prevents a clear functional assignment. The provided data suggest several possible functions of the AhHMA3 protein: Like AtHMA2 and AtHMA4 it might be localised to the plasma membrane and could contribute to the efficient translocation of Zn from root to shoot and/or to the cell-to-cell distribution of Zn in the shoot. If localised to the vacuolar membrane, then a role in maintaining a low cytoplasmic zinc concentration by vacuolar zinc sequestration is possible. In addition, AhHMA3 might be involved in the delivery of zinc ions to trichomes and mesophyll leaf cells that are major zinc storage sites in A. halleri. N2 - Pflanzen sind lebende Systeme, die nicht in der Lage sind ihren Standort sich ändernden Umweltbedingungen anzupassen. Infolgedessen weisen Pflanzen homöostatischeNetzwerke auf, welche die Mengen an intrazellulären Übergangsmetallen in einem sehr engen Konzentrationsbereich kontrollieren um somit Vergiftungs- oder Mangelerscheinungen zu vermeiden. Eine kleine Anzahl von Pflanzen ist hypertolerant gegenüber einem oder mehreren Übergangsmetallen. Einige wenige dieser metalltoleranten Pflanzen sind fähig Übergangsmetalle in beträchtlichen Mengen zu speichern, sprich zu hyperakkumulieren, ohne Vergiftungserscheinungen zu zeigen. Die Haller’sche Schaumkresse (Arabidopis halleri ssp. halleri (L.) O´KANE und AL´SHEHBAZ) aus der Familie der Kreuzblütler (Brassicaceae) ist ein solcher Hyperakkumulator für Zink (Zn). Sie ist nah verwandt mit der Modellpflanze Ackerschmalwand (Arabidopsis thaliana (L.) HEYNHOLD), die jedoch nicht-hypertolerant und nicht-hyperakkumulierend für Übergangsmetalle ist. Diese nahe Verwandtschaft erlaubt vergleichende Studien der molekularen Mechanismen, die Hypertoleranz und Hyperakkumulation zu Grunde liegen. Zu der Gruppe von Kandidatengenen, die möglicherweise von Bedeutung für die Zink-hypertoleranten und -hyperakkumulierenden Eigenschaften von A. halleri sind, gehört AhHMA3, ein Gen mit großer Ähnlichkeit zu AtHMA3 (AGI Nummer: At4g30120) aus A. thaliana. Es kodiert ein Protein aus der Familie transmembraner Übergangsmetall-Transportproteine, den P-typ IB ATPasen. Im Gegensatz zu den niedrigen AtHMA3 Transkriptmengen in A. thaliana wird das AhHMA3 Gen in A. halleri in Gegenwart verschiedener Zn Konzentrationen konstitutiv hoch exprimiert, insbesondere im Spross der Pflanze. Diese Arbeit beschreibt die Klonierung und Charakterisierung des HMA3 Gens und seines Promoters aus A. halleri und A. thaliana. Es wurde gezeigt, dass heterolog exprimiertes AhHMA3 Protein in metallsensitiven Hefestämmen eine erhöhte Toleranz gegenüber Zink und zu einem geringen Grad gegenüber Kadmium (Cd) jedoch nicht gegenüber Kobalt (Co) vermittelt.Weiterhin wurden im Genom von A. halleri mindestens vier AhHMA3 Genkopien, AhHMA3-1 bis AhHMA3-4, nachgewiesen. Eine Genkopie-spezifische Echtzeit-RT-PCR (real-time RT-PCR) deutete darauf hin, dass eine zu AhHMA3-1 und nicht zu AhHMA3-2 oder AhHMA3-4 ähnliche Genkopie die Quelle der konstitutiv hohen Transkriptmengen in A. halleri ist. In Übereinstimmung mit erhöhten mRNS Transkriptmengen inWurzeln von A. thaliana, vermittelte ein AtHMA3 Promoter-GUS (ß-Glucuronidase) Genkonstrukt GUS-Aktivität hauptsächlich in den Leitgeweben der Wurzeln jedoch nicht des Sprosses. Die vermittelte GUS-Aktivität durch Promoterfragmente von AhHMA3-1 und AhHMA3-2 in A. thaliana oder A. halleri Pflanzen spiegelte jedoch nicht die konstitutiv hohe AhHMA3 Expression im Spross von A. halleri wieder. Es wird vermutet, dass andere Faktoren die konstitutiv hohe Expression ermöglichen wie zum Beispiel die gefundenen kopiespezifischen Sequenzinsertionen innerhalb des ersten AhHMA3-1 Introns. Weiterhin ist es denkbar, dass der unbekannte Promoter der AhHMA3-3 Genkopie die Quelle der konstitutiv hohen AhHMA3 Transkriptmengen ist. In diesem Fall wird eine sehr hohe Ähnlichkeit zwischen den Sequenzen von AhHMA3-3 und der AhHMA3-1 vorhergesagt. Es konnten keine deutlichen Ergebnisse zur intrazellulären Lokalisierung gemacht werden, die eine exakte Einordnung der Funktion des AhHMA3 Proteins erlauben würden. Die bisher ermittelten Ergebnisse schlagen jedoch mehrere mögliche Funktionen für AhHMA3 vor: Ähnlich den AhHMA3 homologen Proteinen, AtHMA2 und AtHMA4, könnte AhHMA3 in der Plasmamembran der Zelle sitzen und dort zur effizienten Translokation von Zink aus der Wurzel in den Spross und/oder zur Zell-zu-Zell Verteilung von Zn im Spross beitragen. Falls AhHMA3 in der Membran der Vakuole sitzt, könnte es eine Rolle bei der Aufrechterhaltung niedriger zytoplasmatischer Zinkkonzentrationen durch vakuoläre Zinksequestrierung spielen. Zusätzlich ist es denkbar, dass AhHMA3 an der Abgabe von Zinkionen an Trichome und Blattmesophyllzellen beteiligt ist, die die Haupteinlagerungsorte für Zink in A. halleri darstellen. KW - P-Typ ATPase KW - Übergangsmetalle KW - Hyperakkumulation KW - Zink KW - HMA KW - p-type ATPase KW - transition metals KW - hyperaccumulation KW - zinc KW - HMA Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15259 ER - TY - THES A1 - Miteva, Rositsa Stoycheva T1 - Electron acceleration at localized wave structures in the solar corona T1 - Elektronenbeschleunigung an lokalen Wellenstrukturen in der Sonnenkorona N2 - Our dynamic Sun manifests its activity by different phenomena: from the 11-year cyclic sunspot pattern to the unpredictable and violent explosions in the case of solar flares. During flares, a huge amount of the stored magnetic energy is suddenly released and a substantial part of this energy is carried by the energetic electrons, considered to be the source of the nonthermal radio and X-ray radiation. One of the most important and still open question in solar physics is how the electrons are accelerated up to high energies within (the observed in the radio emission) short time scales. Because the acceleration site is extremely small in spatial extent as well (compared to the solar radius), the electron acceleration is regarded as a local process. The search for localized wave structures in the solar corona that are able to accelerate electrons together with the theoretical and numerical description of the conditions and requirements for this process, is the aim of the dissertation. Two models of electron acceleration in the solar corona are proposed in the dissertation: I. Electron acceleration due to the solar jet interaction with the background coronal plasma (the jet--plasma interaction) A jet is formed when the newly reconnected and highly curved magnetic field lines are relaxed by shooting plasma away from the reconnection site. Such jets, as observed in soft X-rays with the Yohkoh satellite, are spatially and temporally associated with beams of nonthermal electrons (in terms of the so-called type III metric radio bursts) propagating through the corona. A model that attempts to give an explanation for such observational facts is developed here. Initially, the interaction of such jets with the background plasma leads to an (ion-acoustic) instability associated with growing of electrostatic fluctuations in time for certain range of the jet initial velocity. During this process, any test electron that happen to feel this electrostatic wave field is drawn to co-move with the wave, gaining energy from it. When the jet speed has a value greater or lower than the one, required by the instability range, such wave excitation cannot be sustained and the process of electron energization (acceleration and/or heating) ceases. Hence, the electrons can propagate further in the corona and be detected as type III radio burst, for example. II. Electron acceleration due to attached whistler waves in the upstream region of coronal shocks (the electron--whistler--shock interaction) Coronal shocks are also able to accelerate electrons, as observed by the so-called type II metric radio bursts (the radio signature of a shock wave in the corona). From in-situ observations in space, e.g., at shocks related to co-rotating interaction regions, it is known that nonthermal electrons are produced preferably at shocks with attached whistler wave packets in their upstream regions. Motivated by these observations and assuming that the physical processes at shocks are the same in the corona as in the interplanetary medium, a new model of electron acceleration at coronal shocks is presented in the dissertation, where the electrons are accelerated by their interaction with such whistlers. The protons inflowing toward the shock are reflected there by nearly conserving their magnetic moment, so that they get a substantial velocity gain in the case of a quasi-perpendicular shock geometry, i.e, the angle between the shock normal and the upstream magnetic field is in the range 50--80 degrees. The so-accelerated protons are able to excite whistler waves in a certain frequency range in the upstream region. When these whistlers (comprising the localized wave structure in this case) are formed, only the incoming electrons are now able to interact resonantly with them. But only a part of these electrons fulfill the the electron--whistler wave resonance condition. Due to such resonant interaction (i.e., of these electrons with the whistlers), the electrons are accelerated in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona. N2 - Die Sonne ist ein aktiver Stern, was sich nicht nur in den allseits bekannten Sonnenflecken, sondern auch in Flares manifestiert. Während Flares wird eine große Menge gespeicherter, magnetischer Energie in einer kurzen Zeit von einigen Sekunden bis zu wenigen Stunden in der Sonnenkorona freigesetzt. Dabei werden u.a. energiereiche Elektronen erzeugt, die ihrerseits nichtthermische Radio- und Röntgenstrahlung, wie sie z.B. am Observatorium für solare Radioastronomie des Astrophysikalischen Instituts Potsdam (AIP) in Tremsdorf und durch den NASA-Satelliten RHESSI beobachtet werden, erzeugen. Da diese Elektronen einen beträchtlichen Anteil der beim Flare freigesetzten Energie tragen, ist die Frage, wie Elektronen in kurzer Zeit auf hohe Energien in der Sonnenkorona beschleunigt werden, von generellem astrophysikalischen Interesse, da solche Prozesse auch in anderen Sternatmosphären und kosmischen Objekten, wie z.B. Supernova-Überresten, stattfinden. In der vorliegenden Dissertation wird die Elektronenbeschleunigung an lokalen Wellenstrukturen im Plasma der Sonnenkorona untersucht. Solche Wellen treten in der Umgebung der magnetischen Rekonnektion, die als ein wichtiger Auslöser von Flares angesehen wird, und in der Nähe von Stoßwellen, die infolge von Flares erzeugt werden, auf. Generell werden die Elektronen als Testteilchen behandelt. Sie werden durch ihre Wechselwirkung mit den elektrischen und magnetischen Feldern, die mit den Plasmawellen verbunden sind, beschleunigt. Infolge der magnetischen Rekonnektion als Grundlage des Flares werden starke Plasmaströmungen (sogenannte Jets) erzeugt. Solche Jets werden im Licht der weichen Röntgenstrahlung, wie z.B. durch den japanischen Satelliten YOHKOH, beobachtet. Mit solchen Jets sind solare Typ III Radiobursts als Signaturen von energiereichen Elektronenstrahlen in der Sonnenkorona verbunden. Durch die Wechselwirkung eines Jets mit dem umgebenden Plasma werden lokal elektrische Felder erzeugt, die ihrerseits Elektronen beschleunigen können. Dieses hier vorgestellte Szenarium kann sehr gut die Röntgen- und Radiobeobachtungen von Jets und den damit verbundenen Elektronenstrahlen erklären. An koronalen Stoßwellen, die infolge Flares entstehen, werden Elektronen beschleunigt, deren Signatur man in der solaren Radiostrahlung in Form von sogenannten Typ II Bursts beobachten kann. Stoßwellen in kosmischen Plasmen können mit Whistlerwellen (ein spezieller Typ von Plasmawellen) verbunden sein. In der vorliegenden Arbeit wird ein Szenarium vorgestellt, das aufzeigt, wie solche Whistlerwellen an koronalen Stoßwellen erzeugt werden und durch ihre resonante Wechselwirkung mit den Elektronen dieselben beschleunigen. Dieser Prozess ist effizienter als bisher vorgeschlagene Mechanismen und kann deshalb auch auf andere Stoßwellen im Kosmos, wie z.B. an Supernova-Überresten, zur Erklärung der dort erzeugten Radio- und Röntgenstrahlung dienen. KW - Elektronenbeschleunigung KW - Sonnenkorona KW - Jets KW - Stoßwellen KW - Nichtlineare Wellen KW - Electron acceleration KW - Solar corona KW - Jets KW - Shock waves KW - Nonlinear waves Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14775 ER - TY - THES A1 - Nerlich, Annika T1 - Die Rolle der Phosphatidylserin Decarboxylase für die mitochondriale Phospholipid-Biosynthese in Arabidopsis thaliana T1 - Role of phosphatidylserine decarboxylase in mitochondrial phospholipid biosynthesis of Arabidopsis thaliana N2 - Die durch Phosphatidylserin Decarboxylase (PSD) katalysierte Decarboxylierung von Phosphatidylserin (PS) zu Phosphatidylethanolamin (PE) ist für Mitochondrien in Hefe und Mäusen von essentieller Bedeutung. Im Rahmen der vorliegenden Dissertation wurde erstmals die Rolle dieses PE-Syntheseweges in Pflanzen untersucht. Die drei in Arabidopsis identifizierten PSD Gene atPSD1, atPSD2, atPSD3 codieren für Enzyme, die in Membranen der Mitochondrien (atPSD1), der Tonoplasten (atPSD2) und des Endoplasmatischen Retikulums (atPSD3) lokalisiert sind. Der Beitrag der einzelnen PSDs zur PE-Synthese wurde anhand von psd Null-Mutanten untersucht. Dabei stellte sich atPSD3 als das Enzym mit der höchsten Aktivität heraus. Alternativ zum PSD-Weg wird in Arabidopsis PE auch mittels Aminoalkohol-phosphotransferase synthetisiert. Der Verlust der gesamten PSD-Aktivität, wie es in der erzeugten psd Dreifachmutante der Fall ist, wirkt sich ausschließlich auf die Lipidzusammensetzung in der Mitochondrienmembran aus. Demzufolge wird extramitochondriales PE hauptsächlich über die Aminoalkoholphosphotransferase synthetisiert. Die veränderte Lipidzusammensetzung der Mitochondrienmembran hatte jedoch keinen Einfluss auf die Anzahl, Größe und Ultrastruktur der Mitochondrien sowie auf das ADP/ATP-Verhältnis und die Respiration. Neben der Bereitstellung von Reduktionsäquivalenten beeinflusst die Funktionalität der Mitochondrien auch die Bildung von Blüten- und Staubblättern. Diese Blütenorgane waren in der psd Dreifachmutante stark verändert, und der Blütenphänotyp ähnelte der APETALA3-Mutante. Dieses homöotische Gen ist für die Ausbildung von Blüten- und Staubblättern verantwortlich. Für die Erzeugung der Mutanten psd2-1 und psd3-1 wurde ein T-DNA Vektor verwendet, der den Promotor des APETALA3 Gens enthielt, welcher in den Mutanten psd2-1, psd3-1 sowie psd2-1psd3-1 und der psd1psd2-1psd3-1 Dreifachmutante eine vergleichbare Co-Suppression des APETALA3 Gens hervorruft. Der Blütenphänotyp trat jedoch nur in der psd Dreifachmutante auf, da nur in ihr die Kombination von geringen Funktionstörungen der Mitochondrien, hervorgerufen durch veränderte Lipidzusammensetzung, mit der Co-Suppression von APETALA3 auftritt. N2 - Decarboxylation of phosphatidylserine (PS) to form phosphatidylethanolamine (PE) catalyzed by phosphatidylserine decarboxylase (PSD) is an essential reaction for mitochondria in yeast and mice. This dissertation describes the role of this biosynthesis pathway in plants for the first time. Three PSD genes were identified in Arabidopsis, atPSD1, atPSD2, atPSD3. The gene products localize to mitochondria (atPSD1), tonoplast (atPSD2) and endoplasmatic retikulum (atPSD3). Contribution to PE-synthesis of each PSD was analyzed using T-DNA insertion mutants. Thereby, atPSD3 was found to be the most active isoform. Alternatively, PE is also synthesized by the action of aminoalcohol phosphotransferase. Complete loss of PSD activity, like in the psd triple mutant, resulted in changes in lipid composition of mitochondria membranes exclusively. In conclusion the bulk of PE is synthesized by aminoalcohol phosphotransferase. Changed lipid composition of mitochondria did not result in changes of mitochondria number, structure, ADP/ATP ratio and respiration. Mitochondria functionality was formerly shown to effect formation of petals and stamens. These flower organs were drastically morphologically changed in psd triple mutants and showed strong similarities to APETALA3 mutants. APETALA3 is a homeotic gene responsible for specifying petals and stamens. Mutants psd2-1 and psd3-1 used for crossing psd double and triple mutants contained a T-DNA vector which include the promoter for APETALA3. This promoter caused co-suppression of the endogenous APETALA3 gene in all mutants isolated from the Arabidopsis Knockout Facility, whereas changed flower morphology occurred only in the triple mutant concluding a combined effect of co-suppression and a reduced functionality of mitochondria, caused by changed lipid composition. KW - Phospholipide KW - Phosphatidylserin Decarboxylase KW - Phosphatidylserin KW - Phosphatidylethanolamin KW - Mitochondrien KW - phospholipids KW - phosphatidylserine decarboxylase KW - phosphatidylserine KW - phosphatidylethanolamine KW - mitochondria Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14522 ER - TY - THES A1 - Rust, Henning T1 - Detection of long-range dependence : applications in climatology and hydrology T1 - Detektion langreichweitiger Korrelationen : Anwendungen in Klimatologie und Hydrologie N2 - It is desirable to reduce the potential threats that result from the variability of nature, such as droughts or heat waves that lead to food shortage, or the other extreme, floods that lead to severe damage. To prevent such catastrophic events, it is necessary to understand, and to be capable of characterising, nature's variability. Typically one aims to describe the underlying dynamics of geophysical records with differential equations. There are, however, situations where this does not support the objectives, or is not feasible, e.g., when little is known about the system, or it is too complex for the model parameters to be identified. In such situations it is beneficial to regard certain influences as random, and describe them with stochastic processes. In this thesis I focus on such a description with linear stochastic processes of the FARIMA type and concentrate on the detection of long-range dependence. Long-range dependent processes show an algebraic (i.e. slow) decay of the autocorrelation function. Detection of the latter is important with respect to, e.g. trend tests and uncertainty analysis. Aiming to provide a reliable and powerful strategy for the detection of long-range dependence, I suggest a way of addressing the problem which is somewhat different from standard approaches. Commonly used methods are based either on investigating the asymptotic behaviour (e.g., log-periodogram regression), or on finding a suitable potentially long-range dependent model (e.g., FARIMA[p,d,q]) and test the fractional difference parameter d for compatibility with zero. Here, I suggest to rephrase the problem as a model selection task, i.e.comparing the most suitable long-range dependent and the most suitable short-range dependent model. Approaching the task this way requires a) a suitable class of long-range and short-range dependent models along with suitable means for parameter estimation and b) a reliable model selection strategy, capable of discriminating also non-nested models. With the flexible FARIMA model class together with the Whittle estimator the first requirement is fulfilled. Standard model selection strategies, e.g., the likelihood-ratio test, is for a comparison of non-nested models frequently not powerful enough. Thus, I suggest to extend this strategy with a simulation based model selection approach suitable for such a direct comparison. The approach follows the procedure of a statistical test, with the likelihood-ratio as the test statistic. Its distribution is obtained via simulations using the two models under consideration. For two simple models and different parameter values, I investigate the reliability of p-value and power estimates obtained from the simulated distributions. The result turned out to be dependent on the model parameters. However, in many cases the estimates allow an adequate model selection to be established. An important feature of this approach is that it immediately reveals the ability or inability to discriminate between the two models under consideration. Two applications, a trend detection problem in temperature records and an uncertainty analysis for flood return level estimation, accentuate the importance of having reliable methods at hand for the detection of long-range dependence. In the case of trend detection, falsely concluding long-range dependence implies an underestimation of a trend and possibly leads to a delay of measures needed to take in order to counteract the trend. Ignoring long-range dependence, although present, leads to an underestimation of confidence intervals and thus to an unjustified belief in safety, as it is the case for the return level uncertainty analysis. A reliable detection of long-range dependence is thus highly relevant in practical applications. Examples related to extreme value analysis are not limited to hydrological applications. The increased uncertainty of return level estimates is a potentially problem for all records from autocorrelated processes, an interesting examples in this respect is the assessment of the maximum strength of wind gusts, which is important for designing wind turbines. The detection of long-range dependence is also a relevant problem in the exploration of financial market volatility. With rephrasing the detection problem as a model selection task and suggesting refined methods for model comparison, this thesis contributes to the discussion on and development of methods for the detection of long-range dependence. N2 - Die potentiellen Gefahren und Auswirkungen der natürlicher Klimavariabilitäten zu reduzieren ist ein wünschenswertes Ziel. Solche Gefahren sind etwa Dürren und Hitzewellen, die zu Wasserknappheit führen oder, das andere Extrem, Überflutungen, die einen erheblichen Schaden an der Infrastruktur nach sich ziehen können. Um solche katastrophalen Ereignisse zu vermeiden, ist es notwendig die Dynamik der Natur zu verstehen und beschreiben zu können. Typischerweise wird versucht die Dynamik geophysikalischer Datenreihen mit Differentialgleichungssystemen zu beschreiben. Es gibt allerdings Situationen in denen dieses Vorgehen nicht zielführend oder technisch nicht möglich ist. Dieses sind Situationen in denen wenig Wissen über das System vorliegt oder es zu komplex ist um die Modellparameter zu identifizieren. Hier ist es sinnvoll einige Einflüsse als zufällig zu betrachten und mit Hilfe stochastischer Prozesse zu modellieren. In dieser Arbeit wird eine solche Beschreibung mit linearen stochastischen Prozessen der FARIMA-Klasse angestrebt. Besonderer Fokus liegt auf der Detektion von langreichweitigen Korrelationen. Langreichweitig korrelierte Prozesse sind solche mit einer algebraisch, d.h. langsam, abfallenden Autokorrelationsfunktion. Eine verläßliche Erkennung dieser Prozesse ist relevant für Trenddetektion und Unsicherheitsanalysen. Um eine verläßliche Strategie für die Detektion langreichweitig korrelierter Prozesse zur Verfügung zu stellen, wird in der Arbeit ein anderer als der Standardweg vorgeschlagen. Gewöhnlich werden Methoden eingesetzt, die das asymptotische Verhalten untersuchen, z.B. Regression im Periodogramm. Oder aber es wird versucht ein passendes potentiell langreichweitig korreliertes Modell zu finden, z.B. aus der FARIMA Klasse, und den geschätzten fraktionalen Differenzierungsparameter d auf Verträglichkeit mit dem trivialen Wert Null zu testen. In der Arbeit wird vorgeschlagen das Problem der Detektion langreichweitiger Korrelationen als Modellselektionsproblem umzuformulieren, d.h. das beste kurzreichweitig und das beste langreichweitig korrelierte Modell zu vergleichen. Diese Herangehensweise erfordert a) eine geeignete Klasse von lang- und kurzreichweitig korrelierten Prozessen und b) eine verläßliche Modellselektionsstrategie, auch für nichtgenestete Modelle. Mit der flexiblen FARIMA-Klasse und dem Whittleschen Ansatz zur Parameterschätzung ist die erste Voraussetzung erfüllt. Hingegen sind standard Ansätze zur Modellselektion, wie z.B. der Likelihood-Ratio-Test, für nichtgenestete Modelle oft nicht trennscharf genug. Es wird daher vorgeschlagen diese Strategie mit einem simulationsbasierten Ansatz zu ergänzen, der insbesondere für die direkte Diskriminierung nichtgenesteter Modelle geeignet ist. Der Ansatz folgt einem statistischen Test mit dem Quotienten der Likelihood als Teststatistik. Ihre Verteilung wird über Simulationen mit den beiden zu unterscheidenden Modellen ermittelt. Für zwei einfache Modelle und verschiedene Parameterwerte wird die Verläßlichkeit der Schätzungen für p-Wert und Power untersucht. Das Ergebnis hängt von den Modellparametern ab. Es konnte jedoch in vielen Fällen eine adäquate Modellselektion etabliert werden. Ein wichtige Eigenschaft dieser Strategie ist, dass unmittelbar offengelegt wird, wie gut sich die betrachteten Modelle unterscheiden lassen. Zwei Anwendungen, die Trenddetektion in Temperaturzeitreihen und die Unsicherheitsanalyse für Bemessungshochwasser, betonen den Bedarf an verläßlichen Methoden für die Detektion langreichweitiger Korrelationen. Im Falle der Trenddetektion führt ein fälschlicherweise gezogener Schluß auf langreichweitige Korrelationen zu einer Unterschätzung eines Trends, was wiederum zu einer möglicherweise verzögerten Einleitung von Maßnahmen führt, die diesem entgegenwirken sollen. Im Fall von Abflußzeitreihen führt die Nichtbeachtung von vorliegenden langreichweitigen Korrelationen zu einer Unterschätzung der Unsicherheit von Bemessungsgrößen. Eine verläßliche Detektion von langreichweitig Korrelierten Prozesse ist somit von hoher Bedeutung in der praktischen Zeitreihenanalyse. Beispiele mit Bezug zu extremem Ereignissen beschränken sich nicht nur auf die Hochwasseranalyse. Eine erhöhte Unsicherheit in der Bestimmung von extremen Ereignissen ist ein potentielles Problem von allen autokorrelierten Prozessen. Ein weiteres interessantes Beispiel ist hier die Abschätzung von maximalen Windstärken in Böen, welche bei der Konstruktion von Windrädern eine Rolle spielt. Mit der Umformulierung des Detektionsproblems als Modellselektionsfrage und mit der Bereitstellung geeigneter Modellselektionsstrategie trägt diese Arbeit zur Diskussion und Entwicklung von Methoden im Bereich der Detektion von langreichweitigen Korrelationen bei. KW - langreichweitige Korrelationen KW - nichtgenestete Modellselektion KW - FARIMA KW - Unsicherheitsanalyse KW - Bemessungshochwasser KW - long-range dependence KW - long-memory KW - non-nested model selection KW - FARIMA KW - uncertainty analysis KW - return level estimation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13347 ER - TY - THES A1 - Demircioglu, Aydin T1 - Reconstruction of deligne classes and cocycles T1 - Rekonstruktion von Deligne Klassen und Kozykeln N2 - In der vorliegenden Arbeit verallgemeinern wir im Wesentlichen zwei Theoreme von Mackaay-Picken und Picken (2002, 2004). Im ihrem Artikel zeigen Mackaay und Picken,dass es eine bijektive Korrespodenz zwischen Deligne 2-Klassen $\xi \in \check{H}^2(M, \mathcal{D}^2)$ und Holonomie Abbildungen von der zweiten dünnen Homotopiegruppe $\pi_2^2(M)$ in die abelsche Gruppe $U(1)$ gibt. Im zweiten Artikel wird eine Verallgemeinerung dieses Theorems bewiesen: Picken zeigt, dass es eine Bijektion gibt zwischen Deligne 2-Kozykeln und gewissen 2-dimensionalen topologischen Quantenfeldtheorien. In dieser Arbeit zeigen wir, dass diese beiden Theoreme in allen Dimensionen gelten.Wir betrachten zunächst den Holonomie Fall und können mittels simplizialen Methoden nachweisen, dass die Gruppe der glatten Deligne $d$-Klassen isomorph ist zu der Gruppe der glatten Holonomie Abbildungen von der $d$-ten dünnen Homotopiegruppe $\pi_d^d(M)$ nach $U(1)$, sofern $M$ eine $(d-1)$-zusammenhängende Mannigfaltigkeit ist. Wir vergleichen dieses Resultat mit einem Satz von Gajer (1999). Gajer zeigte, dass jede Deligne $d$-Klasse durch eine andere Klasse von Holonomie-Abbildungen rekonstruiert werden kann, die aber nicht nur Holonomien entlang von Sphären, sondern auch entlang von allgemeinen $d$-Mannigfaltigkeiten in $M$ enthält. Dieser Zugang benötigt dann aber nicht, dass $M$ hoch-zusammenhängend ist. Wir zeigen, dass im Falle von flachen Deligne $d$-Klassen unser Rekonstruktionstheorem sich von Gajers unterscheidet, sofern $M$ nicht als $(d-1)$, sondern nur als $(d-2)$-zusammenhängend angenommen wird. Stiefel Mannigfaltigkeiten besitzen genau diese Eigenschaft, und wendet man unser Theorem auf diese an und vergleicht das Resultat mit dem von Gajer, so zeigt sich, dass es zuviele Deligne Klassen rekonstruiert. Dies bedeutet, dass unser Rekonstruktionsthreorem ohne die Zusatzbedingungen an die Mannigfaltigkeit M nicht auskommt, d.h. unsere Rekonstruktion benötigt zwar weniger Informationen über die Holonomie entlang von d-dimensionalen Mannigfaltigkeiten, aber dafür muss M auch $(d-1)$-zusammenhängend angenommen werden. Wir zeigen dann, dass auch das zweite Theorem verallgemeinert werden kann: Indem wir das Konzept einer Picken topologischen Quantenfeldtheorie in beliebigen Dimensionen einführen, können wir nachweisen, dass jeder Deligne $d$-Kozykel eine solche $d$-dimensionale Feldtheorie mit zwei besonderen Eigenschaften, der dünnen Invarianz und der Glattheit, induziert. Wir beweisen, dass jede $d$-dimensionale topologische Quantenfeldtheorie nach Picken mit diesen zwei Eigenschaften auch eine Deligne $d$-Klasse definiert und prüfen nach, dass diese Konstruktion sowohl surjektiv als auch injektiv ist. Demzufolge sind beide Gruppen isomorph. N2 - In this thesis we mainly generalize two theorems from Mackaay-Picken and Picken (2002, 2004). In the first paper, Mackaay and Picken show that there is a bijective correspondence between Deligne 2-classes $\xi \in \check{H}^2(M,\mathcal{D}^2)$ and holonomy maps from the second thin-homotopy group $\pi_2^2(M)$ to $U(1)$. In the second one, a generalization of this theorem to manifolds with boundaries is given: Picken shows that there is a bijection between Deligne 2-cocycles and a certain variant of 2-dimensional topological quantum field theories. In this thesis we show that these two theorems hold in every dimension. We consider first the holonomy case, and by using simplicial methods we can prove that the group of smooth Deligne $d$-classes is isomorphic to the group of smooth holonomy maps from the $d^{th}$ thin-homotopy group $\pi_d^d(M)$ to $U(1)$, if $M$ is $(d-1)$-connected. We contrast this with a result of Gajer (1999). Gajer showed that Deligne $d$-classes can be reconstructed by a different class of holonomy maps, which not only include holonomies along spheres, but also along general $d$-manifolds in $M$. This approach does not require the manifold $M$ to be $(d-1)$-connected. We show that in the case of flat Deligne $d$-classes, our result differs from Gajers, if $M$ is not $(d-1)$-connected, but only $(d-2)$-connected. Stiefel manifolds do have this property, and if one applies our theorem to these and compare the result with that of Gajers theorem, it is revealed that our theorem reconstructs too many Deligne classes. This means, that our reconstruction theorem cannot live without the extra assumption on the manifold $M$, that is our reconstruction needs less informations about the holonomy of $d$-manifolds in $M$ at the price of assuming $M$ to be $(d-1)$-connected. We continue to show, that also the second theorem can be generalized: By introducing the concept of Picken-type topological quantum field theory in arbitrary dimensions, we can show that every Deligne $d$-cocycle induces such a $d$-dimensional field theory with two special properties, namely thin-invariance and smoothness. We show that any $d$-dimensional topological quantum field theory with these two properties gives rise to a Deligne $d$-cocycle and verify that this construction is surjective and injective, that is both groups are isomorphic. KW - Holonomie KW - Hauptfaserbündel KW - Gerben KW - Deligne Kohomologie KW - Globale Differentialgeometrie KW - Holonomy KW - Prinicipal Fibre Bundles KW - Gerbes KW - Deligne Cohomology KW - Global Differentialgeometry Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13755 ER - TY - THES A1 - Senger, Toralf T1 - Untersuchungen zur Metallhomöostase in Arabidopsis thaliana T1 - Investigations to study metal homeostasis in Arabidopsis thaliana N2 - Alle Organismen sind für ihr Überleben auf Metalle angewiesen. Hierbei gibt es für jedes Metall einen Konzentrationsbereich, der das Optimum zwischen Metallmangel, -bedarf und -toxizität darstellt. Es gilt mittlerweile als erwiesen, dass alle Organismen zur Aufrechterhaltung des Metallgleichgewichts ein komplexes Netzwerk von Proteinen und niedermolekularen Verbindungen entwickelt haben. Die molekularen Komponenten dieses Netzwerks sind nur zu einem Teil bekannt und charakterisiert: In den letzten Jahren wurden einige Proteinfamilien identifiziert, deren Mitglieder Metalle durch Lipidmembranen transportieren. Eine dieser Metalltransporterfamilien ist die Cation Diffusion Facilitator (CDF)-Familie: Alle charakterisierten Mitglieder exportieren Metalle aus dem Zytoplasma – entweder in zelluläre Kompartimente oder aus der Zelle heraus. Von den zwölf Mitgliedern dieser Familie in Arabidopsis thaliana (A. thaliana) – Metall Toleranz Protein (MTP)-1 bis -12 – wurden bisher AtMTP1 und AtMTP3 charakterisiert. In dieser Arbeit wird die Charakterisierung von AtMTP2 beschrieben. Wie die homologen Proteine AtMTP1 und AtMTP3 führt AtMTP2 zu Zn-Toleranz, wenn es heterolog in Zn-sensitiven Hefemutanten exprimiert wird. Mit AtMTP2 transformierte Hefemutanten zeigten darüber hinaus erhöhte Co-Toleranz. Expression von chimären AtMTP2/GFP Fusionsproteinen in Hefe, A.thaliana protoplasten und in stabil transformierten A.thalinana Planzenlinien deutet auf Lokalisation of AtMTP2 in Membranen des Endoplasmatischen Retikulums (ER) hin, wenn GFP an den C-Terminus von MTP2 fusioniert wird. Fusion of GFP an den N-Terminus von AtMTP2 führte zu Lokalisation in der vakuolären Membran, was wahrscheinlichsten auf Fehllokalisierung durch Maskierung eines ER-Retentionsmotivs (XXRR) am N-Terminus von AtMTP2 zurückgeht. Dies legt nahe, dass AtMTP2 die erwähnten Metalle in das Endomembransystem der Zelle transportieren kann. Eine gewebespezifische Lokalisierung wurde mit Pflanzen durchgeführt, die das β-Glucuronidase (GUS)-Reporterprotein bzw. chimäre Fusionsproteine aus EGFP und AtMTP2 unter Kontrolle des nativen pMTP2-Promotors exprimierten. Diese Experimente bestätigten zum einen, dass der pMTP2-Promotor nur unter Zn-Defizienz aktiv ist. GUS-Aktivität wurde unter diesen Bedingungen in zwei Zonen der Wurzelspitze beobachtet: in den isodiametrischen Zellen der meristematischen Zone und in der beginnenden Wurzelhaarzone. Darüber hinaus konnte gezeigt werden, dass die EGFP-Fusionsproteine unter Kontrolle des nativen pMTP2-Promotors nur in epidermalen Zellen exprimiert werden. Für eine homozygote Knockout- Linie, mtp2-S3, konnte bisher kein eindeutiger Phänotyp identifiziert werden. Auf Grundlage der bisher durchgeführten Charakterisierung von AtMTP2 erscheinen zwei Modelle der Funktion von AtMTP2 in der Pflanze möglich: AtMTP2 könnte essentiell für die Versorgung des ER mit Zn unter Zn-Mangelbedingungen sein. Hierfür spricht, dass AtMTP2 in jungen, teilungsaktiven und damit Zn-benötigenden Wurzelzonen exprimiert wird. Die auf die Epidermis beschränkte Lokalisation könnte bei diesem Modell auf die Möglichkeit der zwischenzellulären Zn-Verteilung innerhalb des ER über Desmotubules hindeuten. Alternativ könnte AtMTP2 eine Funktion bei der Detoxifizierung von Zn unter Zn-Schock Bedingungen haben: Es ist bekannt, dass unter Zn- Mangelbedingungen die Expression der zellulären Zn-Aufnahmesysteme hochreguliert wird. Wenn nun die Zn-Verfügbarkeit im Boden z. B durch eine pH-Änderung innerhalb kurzer Zeit stark ansteigt, besteht die Notwendigkeit der Entgiftung von Zn innerhalb der Zelle, bis der starke Einstrom von Zn ins Zytoplasma durch die Deaktivierung der Zn-Aufnahmesysteme und einer geringeren Expression in der Pflanze gedrosselt ist. Ein ähnlicher Mechanismus wurde in der Bäckerhefe S. cerevisae beschrieben, in der darüber hinaus ein Zn-Transporter verstärkt exprimiert wird, der Zn durch Transport in die Vakuole entgiften kann. Es ist durchaus möglich, dass in Arabidopsis AtMTP2 die Zn-Detoxifizierung unter diesen speziellen Bedingungen durch Zn-Transport in das ER oder die Vakuole vermittelt. Zur Identifikation weiterer Komponenten des Metallhomöostasenetzwerks sind verschiedene Ansätze denkbar. In dieser Arbeit wurde in Hefe ein heterologer Screen durchgeführt, um Interaktoren für vier Mitglieder der Arabidopsis-CDF-Familie zu identifizieren. Unter den 11 im Hefesystem bestätigten Kandidaten befindet sich mit AtSPL1 ein AtMTP1-Interaktionskandidat, der möglicherweise eine Rolle bei der Cu-,Zn-Homöostase spielt. Als wahrscheinliche AtMTP3-Interaktionskandidaten wurde die c”-Untereinheit der vakuolären H+-ATPase AtVHA identifiziert sowie mit AtNPSN13 ein Protein, das vermutlich eine Rolle bei Fusionen von Vesikeln mit Zielmembranen spielt. Ein anderer Ansatz zur Identifikation neuer Metallhomöostasegene ist die vergleichende Elementanalyse von natürlichen oder mutagenisierten Pflanzenpopulationen. Voraussetzung für diesen Ansatz ist die schnelle und genaue Analyse des Elementgehalts von Pflanzen. Eine etablierte Methode zur simultanen Bestimmung von bis zu 65 Elementen in einer Probe ist die Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). Der limitierende Faktor für einen hohen Probendurchsatz ist die Notwendigkeit, Proben für die Analyse zu verflüssigen. Eine alternative Methode der Probenzuführung zum Analysegerät ist die elektrothermale Verdampfung (ETV) der Probe. Zur weitgehend automatisierten Analyse von Pflanzenmaterial mit minimiertem Arbeitsaufwand wurde eine Methode entwickelt, die auf der Kopplung der ETV mit der ICP OES basiert. N2 - All organisms require for their survival essential metals. For each required metal exists an optimal concentration between metal deficiency and -toxicity. It has become evident that all organisms developed a complex network of proteins and low molecular compounds to maintain the equilibrium between all metals. Only few molecular components of this metal-homeostasis network are characterized in detail: A number of protein families whose members transport metals over the barrier of lipid-membranes have been identified during the last couple of years. One of those metal-transport families is the Cation Diffusion Facilitator (CDF) family. All characterized members export metals from the cytoplasm – either into cellular compartments or outside the cell. From the 12 Arabidopsis thaliana (A.thaliana) members – Metal Tolerance Protein (MTP)-1 to 1-2 – only MTP1 and MTP3 have been characterized yet. In this work, characterization of MTP2 is described. As was found for the homologous proteins AtMTP1 and AtMTP3, heterologous expression of AtMTP2 in Zn-sensitive yeast mutants leads to enhanced Zn-tolerance. Less pronounced, enhanced tolerance was also found for Co when AtMTP2 was expressed in Co sensitive yeast mutants. Expression of chimeric AtMTP2/GFP fusion proteins in yeast, A.thaliana protoplasts and in stably transformed A.thalinana plant lines indicated localization of MTP2 in membranes of the endoplasmic reticulum, when GFP was fused to the C-terminal end of MTP2. Fusion of GFP to the N-terminal end of MTP2 lead to vacuolar localization that is most likely explained as mistargeting due to masking of an ER retrieval motive (XXRR) found at the N-terminus of MTP2. This suggests that AtMTP2 mediates the transport of Zn and Co into the endomembrane system of the cell. Tissue specific localization was performed with plant lines expressing the β-Glucuronidase (GUS) reporter protein and with plant lines expressing chimeric fusions of GFP with AtMTP2 under control of the native pMTP2 promoter. Those experiments confirmed Affymetrix Genechip® data suggesting activity of the pMTP2 promoter only under Zn-deficiency. GUS activity was only found under Zn-deficiency in two zone of root tips – the meristematic zone, characterized by isodiamtric cells, and in the beginning differentiation zone, characterized by appearing root hairs. Confocal microscopy with plant lines expressing chimeric MTP2 /GFP fusions demonstrated that expression of AtMTP2 is restricted to epidermal cells. A phenotype for the homozygous mtp2-S3 knockout mutant could not be identified yet. Based on the data obtained as yet , two mode of action of AtMTP2 in planta seam likely: AtMTP2 could be essential for delivery of Zn to the ER under Zn-deficiency. This is supported by the fact, that AtMTP2 is active in young, dividing (and therefore Zn-requiring) zones of the root. The epidermal-restricted expression of AtMTP2 points towards a distribution of Zn in these root zones of Zn within desmotubules. Alternatively, AtMTP2 could have a Zn-detoxifying function under Zn-shock. It is known that in yeast under Zn-deficiency not only the expression of an Zn-uptake transporter is up-regulated, but also the expression of a vacuolar Zn-transporter. It mediates Zn-detoxification of surplus Zn that enters cells upon Zn-resupply before shut down of the Zn uptake system. AtMTP2 could exert this function when soil Zn-availability raises suddenly, for example due to rain after a drought. Different means/methods are perceivable to identify further components of the metal homeostasis network. In this work, a heterologuos screen was performed in yeast to identify interacting proteins for four members of the Arabidopsis CDF-family. Among 11 candidates identified and confirmed in the Split Ubiquitin System (SUS, a Yeast-2-Hybrid variant) is with AtSPL1 an AtMTP1 interaction candidate, which plays putatively a role in Zn,Cu homoestasis. The c” subunit of the vacuolar H+-ATPase AtVHA was found as likely AtMTP3-interaction candidate, as well as AtNPSN13, an protein that plays putatively a role in fusion of vesicles with target-membranes. Another method to identify new metal homeostasis genes is the comparative elemental analysis of natural and mutagenized plant populations. Prerequisite for this approach is the fast and accurate analysis of the elemental composition of plants. An established method for elemental analysis is Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). The limiting factor for high thoughput is the requirement for laborious wet digest of plant samples before analysis. An alternative mean of sample delivery to the ICP OES is electrothermal vaporization (ETV). For faster, less laborious analysis of plant material, a method based on the established coupling of ETV with ICP OES was developed, which is optimized for plant material and automated as far as possible. KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interaktoren KW - Split Ubiquitin KW - ETV KW - ICP OES KW - CDF KW - MTP KW - MTP1 KW - MTP2 KW - MTP3 KW - Interactors KW - Split Ubiquitin KW - ETV KW - ICP OES Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13234 ER - TY - THES A1 - Weber, Jens T1 - Meso- und mikroporöse Hochleistungspolymere : Synthese, Analytik und Anwendungen T1 - Meso- and microporous high performance polymers : synthesis, characterisation and application N2 - Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikroporösen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesoporösen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herauslösen des Silikats mit Ammoniumhydrogendifluorid führt zu mesoporösen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abhängigkeit der beobachteten Porosität vom Massenverhältnis Silikat zu Polymer wurde ebenso untersucht wie die Abhängigkeit der Porosität vom Vernetzergehalt. Die Porosität vollvernetzter Proben zeigt eine lineare Abhängigkeit vom Verhältnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert überschritten, ist teilweiser Porenkollaps zu beobachten. Die Abhängigkeit der Porosität vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der völlige Kollaps einiger Poren bei Stabilität der verbleibenden Poren zu beobachten. Ein komplett unporöses PBI resultiert bei Abwesenheit des Vernetzers. Die mesoporösen PBI-Netzwerke konnten kontrolliert mit Phosphorsäure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitfähigkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in höheren Leitfähigkeiten resultiert. Durch die vernetzte Struktur war des Weiteren genügend mechanische Stabilität gegeben, um die Addukte reversibel und bei sehr guten Leitfähigkeiten bis zu Temperaturen von 190°C bei 0% relativer Feuchtigkeit zu untersuchen. Dies ist für unstrukturierte Phosphorsäure/PBI - Addukte aus linearem PBI nicht möglich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikroporöser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikroporöser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gewählt. Dieses Molekül ist leicht und vielfältig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von löslichen, intrinsisch mikroporösen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosität stark von der molekularen Architektur und der Verarbeitung der Polymere abhängig ist. Die Charakterisierung der Porosität erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelröntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abhängigen Deformationen unterliegen. Die starke Quellung der Proben während des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenfüllung und dadurch induzierter Henry-Sorption, erklärt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikroporöser Polyamid- und Polyimidnetzwerke. Während Polyimidnetzwerke auf Spirobifluorenbasis ausgeprägte Mikroporosität und spezifische Oberflächen von ca. 1100 m²/g aufwiesen, war die Situation für entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosität nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfläche von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikroporösen Polymeren somit etwas genauer gezogen werden. ausgeprägte Mikroporosität kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosität durch Templatierung" und "Mikroporosität durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Präsenz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine höhere Protonenleitfähigkeit im Vergleich zu einem rein mesoporösen PBI aus. Der letzte Teil der Arbeit beschäftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu löslichem oder vernetztem PBI ist in der Salzschmelze möglich. N2 - The first part of the thesis describes the synthesis and characterisation of cross linked, mesoporous poly(benzimidazole) (PBI) prepared by a hard templating approach. Silica nanoparticles were used as template and removed after the polycondensation by immersing the hybrid material in aqueous NH4HF2 solution. The resulting mesoporous PBI showed surface areas up to 200 m²/g as established by N2 BET and porosities up to 37 vol.-%. The influence of the template and cross linker content on the observable porosity was investigated. Nitrogen sorption and small angle x-ray scattering (SAXS) were employed as analytical techniques. The template morphology was reproduced almost perfectly, yielding spherical pores of 11 nm in diameter if the samples were fully cross linked. It was shown that there is a linear dependence of the porosity on the template content up to a critical weight ratio of silica/polymer. If the silica content is raised above 50 wt.-% partial collapse of pores is observed. The dependence of the porosity on the cross linker content at constant amount of template was found to be non-linear. At the absence of any cross linker, no porosity was observed after template removal. At 10 mol-% cross linker the onset of porosity could be observed. At higher cross linker contents, the porosity was nearly the same as for the fully cross linked PBI. The mesoporous PBI could be loaded with crystalline phosphoric acid to yield highly proton conductive materials. It was shown that the material retains its nanostructure when loaded with phosphoric acid even after annealing at 180_C for 12 h. The conductivity of the nanostructured samples was one to two orders of magnitude higher than the conductivity of a nonstructured sample. The impact of the cross linking density on the conductivity was also investigated. The second part of the work describes the synthesis and characterisation of microporous poly(amide)s and poly(imide)s. 9,9'-spirobifluorene derivatives were used to introduce a rigid, structure-directing motif which prevents the polymer chains from close packing. Firstly, the synthesis of soluble poly(amide)s and poly(imide) is described. It was observed that the microporosity is strongly dependent on the processing of the soluble polymers. In the case when polymers were precipitated from solvents of high polarity no microporosity was observed, while polymers prone to solvation in solvents of lower polarity exhibited microporosity as observed in nitrogen sorption measurements. Wide angle x-ray scattering (WAXS) showed that the microstructure was indeed dependent on the processing conditions. SAXS measurements of the polymers revealed that nitrogen sorption alone is not sufficient for the analysis of the porosity. A significant mismatch between the results obtained by the two methods indicated that only a fraction of the pore volume of the polymers was accessible for nitrogen molecules. The second part of the chapter describes the synthesis, characterisation and application of spirobifluorene based, cross linked poly(amide)s and poly(imide)s. The poly(amide) networks did not show any microporosity when analysed by nitrogen sorption. This led to the conclusion that the amide bond is too weak to withstand the interfacial forces. In contrast, poly(imide) networks exhibited pronounced microporosity with surface areas of around 1000 m2/g. The analysis of these networks was again done by nitrogen sorption and SAXS. Furthermore, molecular modelling was used to calculate the true and apparent densities of the networks. In case of the poly(imide) networks, the results of the various measurement techniques were in reasonable agreement. This indicates that the pore volume was nearly completely accessible. Finally it was established that the structure directing motif is necessary to obtain microporous polymers, as a poly(imide) prepared from a spatially undefined monomer did not feature microporosity. Pressure dependent SAXS measurements showed that the polymer networks undergo significant elastic deformations upon evacuation. This behavior complicates the analysis of the nitrogen sorption data, making it impossible to extract reliable pore size distributions. The third and last part of the thesis deals with the development of a new reaction medium for the synthesis of poly(benzimidazole). An eutectic salt melt, composed of lithium chloride and potassium chloride was used in an ionothermal synthesis of linear PBI, opening a green chemistry route towards PBI. The influence of the reaction conditions on the properties of the resulting polymers was investigated. The new reaction medium allowed furthermore the synthesis of linear and cross linked spirobifluorene based PBIs. This is not easily possible by using the classical synthetic pathways towards PBI. The spirobifluorene based PBIs synthesized in this work did, however not feature intrinsic microporosity. KW - poröse Polymere KW - Röntgenkleinwinkelstreuung KW - Gassorption KW - Protonenleitfähigkeit KW - porous polymers KW - small-angle x-ray scattering KW - gas sorption KW - proton conductivity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15994 ER - TY - THES A1 - Adelhelm, Philipp T1 - Novel carbon materials with hierarchical porosity : templating strategies and advanced characterization T1 - Neue Kohlenstoffmaterialien mit hierarchischer Porosität : Strategien der Templatierung und erweiterte Charakterisierung N2 - The aim of this work was the generation of carbon materials with high surface area, exhibiting a hierarchical pore system in the macro- and mesorange. Such a pore system facilitates the transport through the material and enhances the interaction with the carbon matrix (macropores are pores with diameters > 50 nm, mesopores between 2 – 50 nm). Thereto, new strategies for the synthesis of novel carbon materials with designed porosity were developed that are in particular useful for the storage of energy. Besides the porosity, it is the graphene structure itself that determines the properties of a carbon material. Non-graphitic carbon materials usually exhibit a quite large degree of disorder with many defects in the graphene structure, and thus exhibit inherent microporosity (d < 2nm). These pores are traps and oppose reversible interaction with the carbon matrix. Furthermore they reduce the stability and conductivity of the carbon material, which was undesired for the proposed applications. As one part of this work, the graphene structures of different non-graphitic carbon materials were studied in detail using a novel wide-angle x-ray scattering model that allowed precise information about the nature of the carbon building units (graphene stacks). Different carbon precursors were evaluated regarding their potential use for the synthesis shown in this work, whereas mesophase pitch proved to be advantageous when a less disordered carbon microstructure is desired. By using mesophase pitch as carbon precursor, two templating strategies were developed using the nanocasting approach. The synthesized (monolithic) materials combined for the first time the advantages of a hierarchical interconnected pore system in the macro- and mesorange with the advantages of mesophase pitch as carbon precursor. In the first case, hierarchical macro- / mesoporous carbon monoliths were synthesized by replication of hard (silica) templates. Thus, a suitable synthesis procedure was developed that allowed the infiltration of the template with the hardly soluble carbon precursor. In the second case, hierarchical macro- / mesoporous carbon materials were synthesized by a novel soft-templating technique, taking advantage of the phase separation (spinodal decomposition) between mesophase pitch and polystyrene. The synthesis also allowed the generation of monolithic samples and incorporation of functional nanoparticles into the material. The synthesized materials showed excellent properties as an anode material in lithium batteries and support material for supercapacitors. N2 - Kohlenstoffmaterialien finden aufgrund ihrer Vielseitigkeit heute in den unterschiedlichsten Bereichen des täglichen Lebens ihren Einsatz. Bekannte Beispiele sind Kohlenstofffasern in Verbundwerkstoffen, Graphit als trockenes Schmiermittel, oder Aktivkohlen in Filtersystemen. Ferner wird Graphit als Elektrodenmaterial auch in Lithium-Ionen-Batterien verwendet. Wegen knapper werdender Ressourcen von Öl und Gas wurde in den letzten Jahren verstärkt an der Entwicklung neuer Materialien für die Speicherung von Wasserstoff und elektrischer Energie gearbeitet. Die Nanotechnologie ist dabei auch für neue Kohlenstoffmaterialien zukunftsweisend, denn sie stellt weitere Anwendungsmöglichkeiten in Aussicht. In dieser Arbeit wurden hierzu mittels des sogenannten Nanocastings neue Kohlenstoffmaterialien für Energieanwendungen, insbesondere zur Speicherung von elektrischer Energie entwickelt. Die Eigenschaften eines Kohlenstoffmaterials beruhen im Wesentlichen auf der Struktur des Kohlenstoffs im molekularen Bereich. Die in dieser Arbeit hergestellten Materialen bestehen aus nichtgraphitischem Kohlenstoff und wurden im ersten Teil der Arbeit mit den Methoden der Röntgenstreuung genau untersucht. Eine speziell für diese Art von Kohlenstoffen kürzlich entwickelte Modellfunktion wurde dazu an die experimentellen Streubilder angepasst. Das verwendete Modell basiert dabei auf den wesentlichen Strukturmerkmalen von nichtgraphitischem Kohlenstoff und ermöglichte von daher eine detaillierte Beschreibung der Materialien. Im Gegensatz zu den meisten nichtgraphitischen Kohlenstoffen konnte gezeigt werden, dass die Verwendung von Mesophasen-Pech als Vorläufersubstanz (Precursor) ein Material mit vergleichsweise geringem Grad an Unordnung ermöglicht. Solch ein Material erlaubt eine ähnlich reversible Einlagerung von Lithium-Ionen wie Graphit, weist aber gleichzeitig wegen des nichtgraphitischen Charakters eine deutlich höhere Speicherfähigkeit auf. Zur Beschreibung der Porosität eines Materials verwendet man die Begriffe der Makro-, Meso-, und Mikroporen. Die Aktivität eines Materials kann durch die Erhöhung der Oberfläche noch erheblich gesteigert werden. Hohe Oberflächen können insbesondere durch die Schaffung von Poren im Nanometerbereich erzielt werden. Um die Zugänglichkeit zu diesen Poren zu steigern, weist ein Material idealerweise zusätzlich ein kontinuierliches makroporöses Transportsystem (Porendurchmesser d > 50 nm) auf. Solch eine Art von Porosität über mehrere Größenordnungen wird allgemein als „hierarchische Porosität“ bezeichnet. Für elektrochemische Anwendungen sind sogenannte Mesoporen (d = 2 – 50 nm) relevant, da noch kleinere Poren (Mikroporen, d < 2 nm) z.B. zu einer irreversiblen Bindung von Lithium- Ionen führen können. Wird Mesophasen-Pech als Kohlenstoffprekursor verwendet, kann die Entstehung dieser Mikroporen verhindert werden. Im zweiten und dritten Teil der Arbeit konnte mit den Methoden des „Nanocastings“ zum ersten Mal die spezielle Struktur des Mesophasen-Pech basierenden Kohlenstoffmaterials mit den Vorteilen einer hierarchischen (makro- / meso-) Porosität kombiniert werden. Im ersten Syntheseverfahren wurde dazu ein sogenanntes „hartes Templat“ mit entsprechender Porosität aus Siliziumdioxid repliziert. Aufgrund der hohen Viskosität des Pechs und der geringen Löslichkeit wurde dazu ein Verfahren entwickelt, das die Infiltration des Templates auch auf der Nanometerebene ermöglicht. Das Material konnte in Form größerer Körper (Monolithen) hergestellt werden, die im Vergleich zu Pulvern eine bessere technische Verwendung ermöglichen. Im zweiten Syntheseverfahren konnte die Herstellung eines hierarchisch makro- / mesoporösen Kohlenstoffmaterials erstmals mittels eines weichen Templates (organisches Polymer) erreicht werden. Die einfache Entfernung von weichen Templaten durch eine geeignete Temperaturbehandlung, macht dieses Verfahren im Vergleich zu hart templatierten Materialien kostengünstiger und stellt eine technische Umsetzung in Aussicht. Desweiteren erlaubt das Syntheseverfahren die Herstellung von monolithischen Körpern und die Einbindung funktionaler Nanopartikel. Die hergestellten Materialien zeigen exzellente Eigenschaften als Elektrodenmaterial in Lithium-Ionen-Batterien und als Trägermaterial für Superkondensatoren. KW - Mesoporosität KW - hierarchische Porosität KW - weiche und harte Templatierung KW - Kohlenstoffmaterialien KW - Weitwinkelröntgenstreuung KW - Mesoporosity KW - hierarchical porosity KW - soft and hard templating KW - carbon materials KW - wide-angle x-ray scattering Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15053 ER - TY - THES A1 - Schröder, Birgit Eva T1 - Spatial and temporal dynamics of the terrestrial carbon cycle : assimilation of two decades of optical satellite data into a process-based global vegetation model T1 - Räumliche und zeitliche Dynamik des terrestrischen Kohlenstoffhaushaltes anhand der Assimilation von 20 Jahren optischer Satellitendaten in ein prozessbasiertes dynamisches globales Vegetationsmodell (DGVM) N2 - This PhD thesis presents the spatio-temporal distribution of terrestrial carbon fluxes for the time period of 1982 to 2002 simulated by a combination of the process-based dynamic global vegetation model LPJ and a 21-year time series of global AVHRR-fPAR data (fPAR – fraction of photosynthetically active radiation). Assimilation of the satellite data into the model allows improved simulations of carbon fluxes on global as well as on regional scales. As it is based on observed data and includes agricultural regions, the model combined with satellite data produces more realistic carbon fluxes of net primary production (NPP), soil respiration, carbon released by fire and the net land-atmosphere flux than the potential vegetation model. It also produces a good fit to the interannual variability of the CO2 growth rate. Compared to the original model, the model with satellite data constraint produces generally smaller carbon fluxes than the purely climate-based stand-alone simulation of potential natural vegetation, now comparing better to literature estimates. The lower net fluxes are a result of a combination of several effects: reduction in vegetation cover, consideration of human influence and agricultural areas, an improved seasonality, changes in vegetation distribution and species composition. This study presents a way to assess terrestrial carbon fluxes and elucidates the processes contributing to interannual variability of the terrestrial carbon exchange. Process-based terrestrial modelling and satellite-observed vegetation data are successfully combined to improve estimates of vegetation carbon fluxes and stocks. As net ecosystem exchange is the most interesting and most sensitive factor in carbon cycle modelling and highly uncertain, the presented results complementary contribute to the current knowledge, supporting the understanding of the terrestrial carbon budget. N2 - In der vorliegenden Arbeit wird anhand der Kombination eines dynamischen globalen Vegetationsmodells mit einer Zeitreihe von 21 Jahren optischer Satellitendaten eine realistische Abschätzung der terrestrischen Quellen und Senken von CO2 ermöglicht. Grundlage des hier vorgestellten neuen Modells stellt das dynamische globale Vegetationsmodell LPJ dar, ein prozessorientiertes Vegetationsmodell, das basierend auf ökophysiologischen Grundlagen die Vegetationsverteilung und -dynamik, Störungen (z.B. Feuer) und den Kohlenstoff- sowie den Wasserkreislauf modelliert. Die Kopplung des LPJ-DGVM erfolgte mit einer Zeitreihe globaler AVHRR-fPAR Daten (fPAR – Anteil photosynthetisch aktiver Strahlung), für den Zeitraum 1982 bis 2002 in einer räumlichen Auflösung von 0.5°. Als Ergebnis liegt nun eine globale raum-zeitliche Verteilung aller relevanten Kohlenstoffflüsse vor: Nettoprimärproduktion, Bodenrespiration, Nettoökosystemproduktion, durch Feuer und Ernte emittierter Kohlenstoff, sowie der in Biomasse und Boden gespeicherte Kohlenstoff. Verglichen mit dem Originalmodell haben sich durch die Einspeisung der Satellitendaten alle relevanten Kohlenstoffkomponenten verringert und zeigen nun bessere Übereinstimmung mit Literaturwerten. Die geringeren Kohlenstoffflüsse resultieren aus einer Kombination verschiedener Effekte: geringere Vegetationsbedeckung, Berücksichtigung der landwirtschaftlichen Nutzfläche, realistischere Abbildung der Saisonalität, Veränderung der Vegetationsverteilung und Verschiebung der Artenzusammensetzung. Die globalen Kohlenstoffflüsse werden mit dem vorgestellten Modell realistischer abgebildet als mit Ansätzen, die nur die potentiell natürliche Vegetation simulieren. Insbesondere die Quellen- und Senkendynamik unterliegt vielfältigen Prozessen, die mit einem Modell, dass auch die Bodenrespiration prozessorientiert berücksichtigt, verlässlich geschätzt wird. KW - Vegetationsmodell KW - Kohlenstoffmodell KW - DGVM KW - LPJ KW - Kohlenstoffhaushalt KW - vegetation model KW - carbon cycle KW - DGVM KW - LPJ KW - global change Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17596 ER - TY - THES A1 - Jiang, Chunyan T1 - Multi-visualization and hybrid segmentation approaches within telemedicine framework T1 - Multi-Visualisierung und hybride Segmentierungsansätze auf dem Gebiet der Telemedizin N2 - The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension. N2 - Innovative Informationstechnologien haben viele Bereiche unseres Lebens verändert. Im Gesundheitsbereich ist es mittels Computer möglich, qualitativ hochwertige und große volumetrische Bilddaten zu verwalten, zu verarbeiten und dadurch die medizinische Betreuung zu unterstützen. In dieser Dissertation stelle ich verschiedene Methoden vor, die Mediziner beim Prozess der Beobachtung, Verarbeitung und Nutzung von Bilddaten verstärkt unterstützten können. Meine Forschungsarbeit befasst sich mit drei Schwerpunktthemen: Telemedizinintegration, Visualisierung von medizinischen Bildern und Bildsegmentierung. Zur Demonstration der Machbarkeit der vorgeschlagenen Methoden implementierte ich zudem eine Anwendungssoftware. Das entwickelte System kann in punkto Telemedizinintegration nicht nur Dateien im DICOM Format lesen und schreiben, sondern auch nicht-standardisierte Dateien reparieren. In meiner Arbeit gebe ich außerdem einen Vorschlag für eine Erweiterung des DICOM Standards für die Speicherung von 3D Bildinformationen. Zur Darstellung der Bilddaten wurden in dem entwickelten System drei verschiedene Ansichten implementiert: Volumen Ansicht, Oberflächen Ansicht sowie Querschnitt Ansicht. Ein Großteil meiner Arbeit ist der Vorschlag eines neuen hybriden Bildsegmentierungsansatzes. Durch das neu vorgeschlagene Verfahren können komplexe neurale MRI Daten effizient und präzise segmentiert werden. Zusätzlich wird der manuelle Arbeitsaufwand der Experten drastisch verringert. KW - medizinisch KW - bild KW - Segmentierung KW - medical KW - image KW - segmentation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12829 ER - TY - THES A1 - Müller, Melanie J. I. T1 - Bidirectional transport by molecular motors T1 - Bidirektionaler Transport durch molekulare Motoren N2 - In biological cells, the long-range intracellular traffic is powered by molecular motors which transport various cargos along microtubule filaments. The microtubules possess an intrinsic direction, having a 'plus' and a 'minus' end. Some molecular motors such as cytoplasmic dynein walk to the minus end, while others such as conventional kinesin walk to the plus end. Cells typically have an isopolar microtubule network. This is most pronounced in neuronal axons or fungal hyphae. In these long and thin tubular protrusions, the microtubules are arranged parallel to the tube axis with the minus ends pointing to the cell body and the plus ends pointing to the tip. In such a tubular compartment, transport by only one motor type leads to 'motor traffic jams'. Kinesin-driven cargos accumulate at the tip, while dynein-driven cargos accumulate near the cell body. We identify the relevant length scales and characterize the jamming behaviour in these tube geometries by using both Monte Carlo simulations and analytical calculations. A possible solution to this jamming problem is to transport cargos with a team of plus and a team of minus motors simultaneously, so that they can travel bidirectionally, as observed in cells. The presumably simplest mechanism for such bidirectional transport is provided by a 'tug-of-war' between the two motor teams which is governed by mechanical motor interactions only. We develop a stochastic tug-of-war model and study it with numerical and analytical calculations. We find a surprisingly complex cooperative motility behaviour. We compare our results to the available experimental data, which we reproduce qualitatively and quantitatively. N2 - In biologischen Zellen transportieren molekulare Motoren verschiedenste Frachtteilchen entlang von Mikrotubuli-Filamenten. Die Mikrotubuli-Filamente besitzen eine intrinsische Richtung: sie haben ein "Plus-" und ein "Minus-"Ende. Einige molekulare Motoren wie Dynein laufen zum Minus-Ende, während andere wie Kinesin zum Plus-Ende laufen. Zellen haben typischerweise ein isopolares Mikrotubuli-Netzwerk. Dies ist besonders ausgeprägt in neuronalen Axonen oder Pilz-Hyphen. In diesen langen röhrenförmigen Ausstülpungen liegen die Mikrotubuli parallel zur Achse mit dem Minus-Ende zum Zellkörper und dem Plus-Ende zur Zellspitze gerichtet. In einer solchen Röhre führt Transport durch nur einen Motor-Typ zu "Motor-Staus". Kinesin-getriebene Frachten akkumulieren an der Spitze, während Dynein-getriebene Frachten am Zellkörper akkumulieren. Wir identifizieren die relevanten Längenskalen und charakterisieren das Stauverhalten in diesen Röhrengeometrien mit Hilfe von Monte-Carlo-Simulationen und analytischen Rechnungen. Eine mögliche Lösung für das Stauproblem ist der Transport mit einem Team von Plus- und einem Team von Minus-Motoren gleichzeitig, so dass die Fracht sich in beide Richtungen bewegen kann. Dies wird in Zellen tatsächlich beobachtet. Der einfachste Mechanismus für solchen bidirektionalen Transport ist ein "Tauziehen" zwischen den beiden Motor-Teams, das nur mit mechanischer Interaktion funktioniert. Wir entwickeln ein stochastisches Tauzieh-Modell, das wir mit numerischen und analytischen Rechnungen untersuchen. Es ergibt sich ein erstaunlich komplexes Motilitätsverhalten. Wir vergleichen unsere Resultate mit den vorhandenen experimentellen Daten, die wir qualitativ und quantitativ reproduzieren. KW - molekulare Motoren KW - bidirektionaler intrazellulärer Transport KW - Tauziehen KW - stochastische Prozesse KW - kooperative Phänomene KW - molecular motors KW - bidirectional intracellular transport KW - tug-of-war KW - stochastic processes KW - cooperative phenomena Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18715 ER -