TY - THES A1 - Ziege, Ricardo T1 - Growth dynamics and mechanical properties of E. coli biofilms T1 - Wachstumsdynamik und mechanische Eigenschaften von E. coli Biofilmen N2 - Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers. This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers. On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis. E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications. Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions. All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields. N2 - Biofilme sind komplexe lebende Materialien, die sich bilden, wenn Bakterien in eine Matrix aus selbstproduzierten Protein- und Polysaccharidfasern eingebettet werden. Die Bildung eines Netzwerks aus extrazellulären Biopolymerfasern trägt zum Zusammenhalt des Biofilms bei, indem sie die Zell-Zell-Anhaftung fördert und die Wechselwirkungen zwischen Biofilm und Substrat vermittelt. Diese sessile Form des Bakterienwachstums wurde von Mikrobiologen eingehend untersucht, um die schädlichen Auswirkungen von Biofilmen in der Medizin und Industrie zu verhindern. Biofilme werden nämlich mit einer erhöhten Antibiotikaresistenz bei bakteriellen Infektionen in Verbindung gebracht, und sie können auch zur Verstopfung von Rohrleitungen führen oder Biokorrosion fördern. Biofilme sind jedoch auch für die Biophysik von Interesse, da sie während ihres Wachstums komplexe morphologische Muster bilden können. In jüngster Zeit werden auf dem aufstrebenden Gebiet der künstlich hergestellten lebenden Materialien die mechanischen Eigenschaften von Biofilmen auf verschiedenen Längenskalen untersucht und die Werkzeuge der synthetischen Biologie genutzt, um die Funktionen ihrer konstitutiven Biopolymere zu beeinflussen. In dieser Doktorarbeit soll geklärt werden, wie die Morphogenese von Escherichia coli (E. coli)-Biofilmen durch deren Wachstumsdynamik und mechanische Eigenschaften beeinflusst wird. Um dieser Frage nachzugehen, habe ich Methoden aus der Zellmechanik und der Materialwissenschaft verwendet. Zunächst habe ich untersucht, wie die biologische Aktivität in Biofilmen zu ungleichmäßigen Wachstumsmustern führt. In einer zweiten Studie untersuchte ich, wie sich die Morphogenese von E. coli-Biofilmen und ihre mechanischen Eigenschaften an einen Umweltstimulus, nämlich den Wassergehalt des Substrats, anpassen. Schließlich habe ich abgeschätzt, wie sich die mechanischen Eigenschaften von E. coli-Biofilmen verändern, wenn die Bakterien verschiedene extrazelluläre Biopolymere exprimieren. Auf nährstoffhaltigen Hydrogelen können mikrometergroße E. coli-Zellen zentimetergroße Biofilme bilden. Während dieses Prozesses führen die bakterielle Vermehrung und die Matrixproduktion zu mechanischen Spannungen im Biofilm, die sich durch die Bildung von makroskopischen Falten und delaminierten Knicken entladen. Um diese biologischen und mechanischen Phänomene miteinander in Beziehung zu setzen, habe ich mit Hilfe von Zeitraffer-Fluoreszenzaufnahmen die Zell- und Matrixoberflächendichte in den frühen und späten Phasen des E. coli-Biofilmwachstums verfolgt. Die Kolokalisierung hoher Zell- und Matrixdichten an der Peripherie geht dem Auftreten mechanischer Instabilitäten in diesem ringförmigen Bereich voraus. An diesem äußeren Ring wird ein frühes Wachstum festgestellt, das durch Zugabe von fluoreszierenden Mikrokugeln zum bakteriellen Inokulum analysiert wurde. Aber nur wenn im Zentrum des Biofilms hohe Raten der Matrixproduktion vorhanden sind, beginnt die Ausbreitung des gesamten Biofilms entlang der Feststoff-Luft-Grenzfläche. Indem ich größere fluoreszierende Partikel über einen längeren Zeitraum verfolgte, konnte ich mehrere kinematische Stadien der E. coli-Biofilmexpansion unterscheiden und einen Übergang von nichtlinearen zu linearen Geschwindigkeitsprofilen beobachten, der dem Auftreten von Falten an der Biofilmperipherie vorausgeht. Die Zerlegung der Partikelgeschwindigkeiten in ihre radialen und umlaufenden Komponenten ergab ein letztes kinematisches Stadium, in dem die Bewegung des Biofilms hauptsächlich auf die radialen delaminierten Knicke gerichtet ist, die sich vertikalisieren. Die in diesen Regionen berechneten Druckspannungen verformen die darunter liegenden Agarsubstrate erheblich. Die gleichzeitige Ansammlung höherer Zell- und Matrixdichten in einer ringförmigen Region und die Abfolge mehrerer kinematischer Stadien dürften somit das Entstehen mechanischer Instabilitäten an der Biofilm-Peripherie fördern. Diese experimentellen Ergebnisse werden voraussichtlich zukünftige Modellierungsansätze der Biofilmmorphogenese voranbringen. Die Morphogenese des E. coli-Biofilms wird voraussichtlich auch von externen Stimuli aus der Umwelt abhängen. Um zu klären, wie das Wasser zur Einstellung der Materialeigenschaften von Biofilmen genutzt werden könnte, haben wir das Wachstum, die Faltenbildung und die Steifigkeit von E. coli-Biofilmen in Abhängigkeit vom Wassergehalt der Nährsubstrate quantifiziert. Zeitraffermikroskopie und computergestützte Bildanalyse zeigten, dass Substrate mit hohem Wassergehalt die Ausbreitungskinetik des Biofilms fördern, während Substrate mit niedrigem Wassergehalt die Faltenbildung des Biofilms begünstigen. Die auf Biofilm-Querschnitten beobachteten Falten erschienen auf Substraten mit hohem Wassergehalt stärker gebogen, während sie auf Substraten mit niedrigem Wassergehalt eher vertikal verliefen. Sowohl die feuchte als auch die trockene Biomasse, die während der 4-tägigen Kultur akkumuliert wurde, war in Biofilmen, die auf Substraten mit hohem Wassergehalt gezüchtet wurden, größer, trotz der zusätzlichen Porosität innerhalb der Matrixschicht. Schließlich ergab die Mikroindentationsanalyse, dass Substrate mit niedrigem Wassergehalt die Bildung von steiferen Biofilmen begünstigten. Diese Studie zeigt, dass E. coli-Biofilme auf den Wassergehalt ihres Substrats reagieren, was für die Abstimmung ihrer Materialeigenschaften im Hinblick auf weitere Anwendungen genutzt werden könnte. Die Materialeigenschaften von Biofilmen hängen außerdem von der Zusammensetzung und Struktur der Matrix aus extrazellulären Proteinen und Polysacchariden ab. Insbesondere wurde vermutet, dass E. coli-Biofilme aufgrund eines dichten Fasernetzwerks aus Amyloid-Curli und Phosphoethanolamin-modifizierter Cellulose eine gewebeähnliche Elastizität aufweisen. Um den Beitrag dieser Komponenten zu den entstehenden mechanischen Eigenschaften von E. coli-Biofilmen zu verstehen, führten wir an Biofilmen, die aus Bakterien verschiedener Stämme gewachsen waren, Mikroeindrücke durch. Biofilme, die beide Hauptmatrixkomponenten enthalten, wiesen nicht nur eine höhere Trockenmasse, einen größeren Ausbreitungsdurchmesser und einen leicht verringerten Wassergehalt auf, sondern auch eine hohe Steifigkeit im Bereich von mehreren hundert kPa, ähnlich wie Biofilme, die nur Curli-Fasern enthalten. Das Fehlen von Amyloid-Curli-Fasern führt dagegen zu deutlich höheren Adhäsionsenergien und einem viskoelastischeren, flüssigkeitsähnlichen Materialverhalten. Die Kombination von Amyloid-Curli-Fasern und Phosphoethanolamin-modifizierten Cellulosefasern impliziert daher die Bildung eines Verbundmaterials, bei dem die Amyloid-Curli-Fasern den E. coli-Biofilmen Steifigkeit verleihen, während die Phosphoethanolamin-modifizierte Cellulose eher als Klebstoff wirkt. Diese Ergebnisse motivieren zu weiteren Studien mit gereinigten Versionen dieser Protein- und Polysaccharidkomponenten, um besser zu verstehen, wie ihre Interaktionen die Funktionen des Biofilms unterstützen. Alle drei Studien zeigen verschiedene Aspekte der Biofilm-Morphogenese, die miteinander verbunden sind. Die erste Arbeit zeigt den Zusammenhang zwischen ungleichmäßigen biologischen Aktivitäten und dem Auftreten mechanischer Instabilitäten im Biofilm auf. Die zweite Arbeit bestätigt die Anpassungsfähigkeit der Morphogenese des E. coli-Biofilms und seiner mechanischen Eigenschaften an einen Umweltreiz, nämlich Wasser. Die letzte Studie schließlich zeigt die komplementäre Rolle der einzelnen Matrixkomponenten bei der Bildung eines stabilen Biofilmmaterials, das nicht nur komplexe Morphologien bildet, sondern auch als Schutzschild für die darin enthaltenen Bakterien fungiert. Unsere experimentellen Erkenntnisse über die Morphogenese von E. coli-Biofilmen und ihre mechanischen Eigenschaften können weitere Auswirkungen auf grundlegende und angewandte Biofilm-Forschungsbereiche haben. KW - biofilm KW - E. coli KW - living materials KW - mechanobiology KW - E. coli KW - Biofilm KW - lebende Materialien KW - Mechanobiologie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559869 ER - TY - THES A1 - Zhou, Shuo T1 - Biological evaluation and sulfation of polymer networks from glycerol glycidyl ether N2 - Cardiovascular diseases are the main cause of death worldwide, and their prevalence is expected to rise in the coming years. Polymer-based artificial replacements have been widely used for the treatment of cardiovascular diseases. Coagulation and thrombus formation on the interfaces between the materials and the human physiological environment are key issues leading to the failure of the medical device in clinical implantation. The surface properties of the materials have a strong influence on the protein adsorption and can direct the blood cell adhesion behavior on the interfaces. Furthermore, implant-associated infections will be induced by bacterial adhesion and subsequent biofilm formation at the implantation site. Thus, it is important to improve the hemocompatibility of an implant by altering the surface properties. One of the effective strategies is surface passivation to achieve protein/cell repelling ability to reduce the risk of thrombosis. This thesis consists of synthesis, functionalization, sterilization, and biological evaluation of bulk poly(glycerol glycidyl ether) (polyGGE), which is a highly crosslinked polyether-based polymer synthesized by cationic ring-opening polymerization. PolyGGE is hypothesized to be able to resist plasma protein adsorption and bacterial adhesion due to analogous chemical structure as polyethylene glycol and hyperbranched polyglycerol. Hydroxyl end groups of polyGGE provide possibilities to be functionalized with sulfates to mimic the anti-thrombogenic function of the endothelial glycocalyx. PolyGGE was synthesized by polymerization of the commercially available monomer glycerol glycidyl ether, which was characterized as a mixture of mono-, di- and tri-glycidyl ether. Cationic ring opening-polymerization of this monomer was carried out by ultraviolet (UV) initiation of the photo-initiator diphenyliodonium hexafluorophosphate. With the increased UV curing time, more epoxides in the side chains of the monomers participated in chemical crosslinking, resulting in an increase of Young’s modulus, while the value of elongation at break of polyGGE first increased due to the propagation of the polymer chains then decreased with the increase of crosslinking density. Eventually, the chain propagation can be effectively terminated by potassium hydroxide aqueous solution. PolyGGE exhibited different tensile properties in hydrated conditions at body temperature compared to the values in the dry state at room temperature. Both Young’s modulus and values of elongation at break were remarkably reduced when tested in water at 37 °C, which was above the glass transition temperature of polyGGE. At physiological conditions, entanglements of the ployGGE networks unfolded and the free volume of networks were replaced by water molecules as softener, which increased the mobility of the polymer chains, resulting in a lower Young’s modulus. Protein adsorption analysis was performed on polyGGE films with 30 min UV curing using an enzyme-linked immunosorbent assay. PolyGGE could effectively prevent the adsorption of human plasma fibrinogen, albumin, and fibronectin at the interface of human plasma and polyGGE films. The protein resistance of polyGGE was comparable to the negative controls: the hemocompatible polydimethylsiloxane (PDMS), showing its potential as a coating material for cardiovascular implants. Moreover, antimicrobial tests of bacterial activity using isothermal microcalorimetry and the microscopic image of direct bacteria culturing demonstrated that polyGGE could directly interfere biofilm formation and growth of both Gram-negative and antibiotic-resistant Gram-positive bacteria, indicating the potential application of polyGGE for combating the risk of hospital-acquired infections and preventing drug-resistant superbug spreading. To investigate its cell compatibility, polyGGE films were extracted by different solvents (ethanol, chloroform, acetone) and cell culture medium. Indirect cytotoxicity tests showed extracted polyGGE films still had toxic effects on L929 fibroblast cells. High-performance liquid chromatography/electrospray ionization mass spectrometry revealed the occurrence of organochlorine-containing compounds released during the polymer-cell culture medium interaction. A constant level of those organochlorine-containing compounds was confirmed from GGE monomer by a specific peak of C-Cl stretching in infrared spectra of GGE. This is assumed to be the main reason causing the increased cell membrane permeability and decreased metabolic activity, leading to cell death. Attempts as changing solvents were made to remove toxic substances, however, the release of these small molecules seems to be sluggish. The densely crosslinked polyGGE networks can possibly contribute to the trapping of organochlorine-containing compounds. These results provide valuable information for exploring the potentially toxic substances, leaching from polyGGE networks, and propose a feasible strategy for minimizing the cytotoxicity via reducing their crosslinking density. Sulfamic acid/ N-Methyl-2-pyrrolidone (NMP) were selected as the reagents for the sulfation of polyGGE surfaces. Fourier transform attenuated total reflection infrared spectroscopy (ATR-FT-IR) was used to monitor the functionalization kinetics and the results confirmed the successful sulfate grafting on the surface of polyGGE with the covalent bond -C-O-S-. X-ray photoelectron spectroscopy was used to determine the element composition on the surface and the cross-section of the functionalized polyGGE and sulfation within 15 min guarantees the sulfation only takes place on the surface while not occurring in the bulk of the polymer. The concentration of grafted sulfates increased with the increasing reaction time. The hydrophilicity of the surface of polyGGE was highly increased due to the increase of negatively charged end groups. Three sterilization techniques including autoclaving, gamma irradiation, and ethylene oxide (EtO) sterilization were used for polyGGE sulfates. Results from ATR-FT-IR and Toluidine Blue O quantitative assay demonstrated the total loss of the sulfates after autoclave sterilization, which was also confirmed by the increased water contact angle. Little influence on the concentration of sulfates was found for gamma-irradiated and autoclaving sterilized polyGGE sulfates. To investigate the thermal influence on polyGGE sulfates, one strategy was to use poly(hydroxyethyl acrylate) sulfates (PHEAS) for modeling. The thermogravimetric analysis profile of PHEAS demonstrated that sulfates are not thermally stable independent of the substrate materials and decomposition of sulfates occurs at around 100 °C. Although gamma irradiation also showed little negative effect on the sulfate content, the color change in the polyGGE sulfates indicates chemical or physical change might occur in the polymer. EtO sterilization was validated as the most suitable sterilization technique to maintain the chemical structure of polyGGE sulfates. In conclusion, the conducted work proved that bulk polyGGE can be used as an antifouling coating material and shows its antimicrobial potential. Sulfates functionalization can be effectively realized using sulfamic acid/NMP. EtO sterilization is the most suitable sterilization technique for grafted sulfates. Besides, this thesis also offers a good strategy for the analysis of toxic leachable substances using suitable physicochemical characterization techniques. Future work will focus on minimizing/eliminating the release of toxic substances via reducing the crosslinking density. Another interesting aspect is to study whether grafted sulfates can meet the need for anti-thrombogenicity. N2 - Herz-Kreislauf-Erkrankungen sind weltweit die Haupttodesursache, und es wird erwartet, dass ihre Prävalenz in den kommenden Jahren zunehmen wird. Künstlicher Ersatz auf Polymerbasis wird in großem Umfang für die Behandlung von Herz-Kreislauf-Erkrankungen eingesetzt. Gerinnung und Thrombenbildung an den Grenzflächen zwischen den Materialien und der menschlichen physiologischen Umgebung sind ein Hauptproblem, das zum Versagen des Medizinprodukts bei der klinischen Implantation führt. Die Oberflächeneigenschaften der Materialien haben einen starken Einfluss auf die Proteinadsorption und können das Adhäsionsverhalten von Blutzellen an den Grenzflächen steuern. Darüber hinaus werden Implantat-assoziierte Infektionen durch bakterielle Adhäsion und anschließende Biofilmbildung an der Implantationsstelle ausgelöst. Daher ist es wichtig, die Hämokompatibilität eines Implantats durch Veränderung der Oberflächeneigenschaften zu verbessern. Eine der wirksamen Strategien ist die Oberflächenpassivierung, um die Fähigkeit zur Protein-/Zellabweisung zu erreichen und so das Thromboserisiko zu verringern. Diese Arbeit befasst sich mit der Synthese, Funktionalisierung, Sterilisation und biologischen Bewertung von Poly(glycerin glycidyl ether) (polyGGE), einem stark vernetzten Polymer auf Polyetherbasis, das durch kationische Ringöffnungspolymerisation hergestellt wird. Es wird angenommen, dass PolyGGE aufgrund seiner ähnlichen chemischen Struktur wie Polyethylenglykol und hyperverzweigtes Polyglycerin der Adsorption von Plasmaproteinen und der Anhaftung von Bakterien widerstehen kann. Die Hydroxyl-Endgruppen von PolyGGE können mit Sulfaten funktionalisiert werden, um die antithrombogene Funktion der endothelialen Glykokalyx zu imitieren. PolyGGE wurde durch Polymerisation des kommerziell erhältlichen Monomers Glycerin Glycidyl ether synthetisiert, das als Mischung aus Mono-, Di- und Triglycidylether charakterisiert wurde. Die kationische Ringöffnungspolymerisation dieses Monomers wurde mit Hilfe des Photoinitiators Diphenyliodoniumhexafluorophosphat durch Ultraviolett (UV) ausgelöst. Mit zunehmender UV-Härtungszeit nahmen mehr Epoxide in den Seitenketten der Monomere an der chemischen Vernetzung teil, was zu einem Anstieg des Elastizitätsmoduls führte, während der Wert der Bruchdehnung von polyGGE zunächst aufgrund der Ausbreitung der Polymerketten anstieg und dann mit zunehmender Vernetzungsdichte abnahm. Schließlich kann die Kettenausbreitung durch wässrige Kaliumhydroxidlösung wirksam gestoppt werden. PolyGGE wies im hydratisierten Zustand bei Körpertemperatur andere Zugeigenschaften auf als im trockenen Zustand bei Raumtemperatur. Sowohl der Elastizitätsmodul als auch die Werte der Bruchdehnung waren deutlich reduziert, wenn sie in Wasser bei 37 °C getestet wurden, was oberhalb der Glasübergangstemperatur von PolyGGE lag. Unter physiologischen Bedingungen entfalteten sich die Verflechtungen der PolyGGE-Netzwerke und das freie Volumen der Netzwerke wurde durch Wassermoleküle als Weichmacher ersetzt, was die Mobilität der Polymerketten erhöhte und zu einem niedrigeren Elastizitätsmodul führte. Die Proteinadsorptionsanalyse wurde an PolyGGE-Filmen mit 30-minütiger UV-Härtung unter Verwendung eines Enzymimmunoassays durchgeführt. PolyGGE konnte die Adsorption von Fibrinogen, Albumin und Fibronektin aus menschlichem Plasma an der Grenzfläche zwischen menschlichem Plasma und PolyGGE-Filmen wirksam verhindern. Die Proteinresistenz von PolyGGE war vergleichbar mit den Negativkontrollen: dem hämokompatiblen Polydimethylsiloxan, was sein Potenzial als Beschichtungsmaterial für kardiovaskuläre Implantate zeigt. Darüber hinaus zeigten antimikrobielle Tests der bakteriellen Aktivität mittels isothermischer Mikrokalorimetrie und das mikroskopische Bild der direkten Bakterienkultur, dass PolyGGE die Biofilmbildung und das Wachstum sowohl von gramnegativen als auch von antibiotikaresistenten grampositiven Bakterien direkt stören kann, was auf die potenzielle Anwendung von PolyGGE zur Bekämpfung des Risikos von Krankenhausinfektionen und zur Verhinderung der Ausbreitung arzneimittelresistenter Superbugs hinweist. Um die Zellkompatibilität zu untersuchen, wurden polyGGE-Folien mit verschiedenen Lösungsmitteln (Ethanol, Chloroform, Aceton) und Zellkulturmedium extrahiert. Indirekte Zytotoxizitätstests zeigten, dass die extrahierten polyGGE-Filme immer noch eine toxische Wirkung auf L929-Fibroblastenzellen hatten. Die Hochleistungsflüssigkeitschromatographie/Elektrospray-Ionisations-Massenspektrometrie zeigte das Auftreten von chlororganischen Derivaten, die während der Interaktion zwischen Polymer und Zellkulturmedium freigesetzt wurden. Ein konstantes Niveau dieser chlororganischen Derivate wurde vom GGE-Monomer durch einen spezifischen C-Cl-Streckungspeak im Infrarotspektrum von GGE bestätigt. Es wird angenommen, dass dies der Hauptgrund für die erhöhte Permeabilität der Zellmembran und die verringerte Stoffwechselaktivität ist, was zum Zelltod führt. Es wurden Versuche unternommen, die Lösungsmittel zu wechseln, um die toxischen Substanzen zu entfernen, aber die Freisetzung dieser kleinen Moleküle scheint nur langsam zu erfolgen. Die dicht vernetzten polyGGE-Netzwerke können möglicherweise zum Einschluss chloridhaltiger Verbindungen beitragen. Diese Ergebnisse liefern wertvolle Informationen für die Erforschung potenzieller toxischer Substanzen, die aus PolyGGE-Netzwerken ausgewaschen werden, und schlagen eine praktikable Strategie zur Minimierung der Zytotoxizität durch Verringerung der Vernetzungsdichte vor. Als Reagenzien für die Sulfatierung von PolyGGE-Oberflächen wurden Sulfaminsäure und N-Methyl-2-Pyrrolidon (NMP) gewählt. Die Fourier-Transformations-Infrarotspektroskopie mit abgeschwächter Totalreflexion (ATR-FT-IR) wurde zur Überwachung der Funktionalisierungskinetik eingesetzt, und die Ergebnisse bestätigten die erfolgreiche Sulfatpfropfung auf der Oberfläche von PolyGGE mit der kovalenten Bindung -C-O-S-. Mit Hilfe der Röntgen-Photoelektronenspektroskopie wurde die Elementzusammensetzung auf der Oberfläche und der Querschnitt des funktionalisierten PolyGGE bestimmt, und die Sulfatierung innerhalb von 15 Minuten garantiert, dass die Sulfatierung nur auf der Oberfläche stattfindet, während sie in der Masse des Polymers nicht vorkommt. Die Konzentration der gepfropften Sulfate nahm mit zunehmender Reaktionszeit zu. Die Hydrophilie der Oberfläche von polyGGE wurde durch die Zunahme negativ geladener Endgruppen stark erhöht. Für die PolyGGE-Sulfate wurden drei Sterilisationstechniken verwendet: Autoklavieren, Gammastrahlenbestrahlung und Ethylenoxid (EtO)-Sterilisation. Die Ergebnisse der quantitativen ATR-FT-IR und Toluidinblau O-Untersuchung zeigten den vollständigen Verlust der Sulfate nach der Sterilisation im Autoklaven, was auch durch den erhöhten Wasserkontaktwinkel bestätigt wurde. Bei den mit Gammastrahlen und im Autoklaven sterilisierten PolyGGE-Sulfaten wurde nur ein geringer Einfluss auf die Sulfatkonzentration festgestellt. Um den thermischen Einfluss auf PolyGGE-Sulfate zu untersuchen, bestand eine Strategie darin, ein Poly(hydroxyethylacrylat)-Sulfat (PHEAS) für die Modellierung zu verwenden. Das Profil der thermogravimetrischen Analyse von PHEAS zeigte, dass Sulfate unabhängig von den Substratmaterialien thermisch nicht stabil sind und die Zersetzung der Sulfate bei etwa 100 °C stattfindet. Obwohl die Gammasterilisation ebenfalls kaum negative Auswirkungen auf den Sulfatgehalt hat, deutet die Farbveränderung der PolyGGE-Sulfate darauf hin, dass chemische oder physikalische Veränderungen im Polymer auftreten könnten. Die EtO-Sterilisation erwies sich als die am besten geeignete Sterilisationstechnik, um die chemische Struktur der PolyGGE-Sulfate zu erhalten. Zusammenfassend lässt sich sagen, dass die durchgeführte Arbeit bewiesen hat, dass PolyGGE als Antifouling-Beschichtungsmaterial verwendet werden kann und sein antimikrobielles Potenzial zeigt. Die Funktionalisierung der Sulfate kann mit Sulfaminsäure/NMP effektiv durchgeführt werden. Die EtO-Sterilisation ist die am besten geeignete Sterilisationstechnik für gepfropfte Sulfate. Darüber hinaus bietet diese Arbeit auch eine gute Strategie für die Analyse toxischer auslaugbarer Substanzen mit Hilfe geeigneter physikalisch-chemischer Charakterisierungstechniken. Zukünftige Arbeiten werden sich darauf konzentrieren, die Freisetzung toxischer Substanzen durch Verringerung der Vernetzungsdichte zu minimieren bzw. zu eliminieren. Ein weiterer interessanter Aspekt ist die Untersuchung, ob gepfropfte Sulfate den Anforderungen an die Anti-Thrombogenität gerecht werden können. KW - Sulfation KW - Antifouling KW - antimicrobial KW - Polyether Y1 - 2022 ER - TY - THES A1 - Zhang, Shuhao T1 - Synthesis and self-assembly of protein-polymer conjugates for the preparation of biocatalytically active membranes T1 - Synthese und Selbstassemblierung von Protein/Polymer-Konjugaten für die Herstellung einer biokatalytisch aktiven Membran N2 - This thesis covers the synthesis of conjugates of 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) with suitable polymers and the subsequent immobilization of these conjugates in thin films via two different approaches. 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. Conjugation and immobilization renders the enzyme applicable for utilization in a continuously run biocatalytic process which avoids the common problem of product inhibition. Within this thesis, conjugates of DERA and poly(N-isopropylacrylamide) (PNIPAm) for immobilization via a self-assembly approach were synthesized and isolated, as well as conjugates with poly(N,N-dimethylacrylamide) (PDMAA) for a simplified and scalable spray-coating approach. For the DERA/PNIPAm-conjugates different synthesis routes were tested, including grafting-from and grafting-to, both being common methods for the conjugation. Furthermore, both lysines and cysteines were addressed for the conjugation in order to find optimum conjugation conditions. It turned out that conjugation via lysine causes severe activity loss as one lysine plays a key role in the catalyzing mechanism. The conjugation via the cysteines by a grafting-to approach using pyridyl disulfide (PDS) end-group functionalized polymers led to high conjugation efficiencies in the presence of polymer solubilizing NaSCN. The resulting conjugates maintained enzymatic activity and also gained high acetaldehyde tolerance which is necessary for their use later on in an industrial relevant process after their immobilization. The resulting DERA/PNIPAm conjugates exhibited enhanced interfacial activity at the air/water interface compared to the single components, which is an important pre-requisite for the immobilization via the self-assembly approach. Conjugates with longer polymer chains formed homogeneous films on silicon wafers and glass slides while the ones with short chains could only form isolated aggregates. On top of that, long chain conjugates showed better activity maintenance upon the immobilization. The crosslinking of conjugates, as well as their fixation on the support materials, are important for the mechanical stability of the films obtained from the self-assembly process. Therefore, in a second step, we introduced the UV-crosslinkable monomer DMMIBA to the PNIPAm polymers to be used for conjugation. The introduction of DMMIBA reduced the lower critical solution temperature (LCST) of the polymer and thus the water solubility at ambient conditions, resulting in lower conjugation efficiencies and in turn slightly poorer acetaldehyde tolerance of the resulting conjugates. Unlike the DERA/PNIPAm, the conjugates from the copolymer P(NIPAM-co-DMMIBA) formed continuous, homogenous films only after the crosslinking step via UV-treatment. For a firm binding of the crosslinked films, a functionalization protocol for the model support material cyclic olefin copolymer (COC) and the final target support, PAN based membranes, was developed that introduces analogue UV-reactive groups to the support surface. The conjugates immobilized on the modified COC films maintained enzymatic activity and showed good mechanical stability after several cycles of activity assessment. Conjugates with longer polymer chains, however, showed a higher degree of crosslinking after the UV-treatment leading to a pronounced loss of activity. A porous PAN membrane onto which the conjugates were immobilized as well, was finally transferred to a dead end filtration membrane module to catalyze the aldol reaction of the industrially relevant mixture of acetaldehyde and hexanal in a continuous mode. Mono aldol product was detectable, but yields were comparably low and the operational stability needs to be further improved Another approach towards immobilization of DERA conjugates that was followed, was to generate the conjugates in situ by simply mixing enzyme and polymer and spray coat the mixture onto the membrane support. Compared to the previous approach, the focus was more put on simplicity and a possible scalability of the immobilization. Conjugates were thus only generated in-situ and not further isolated and characterized. For the conjugation, PDMAA equipped with N-2-thiolactone acrylamide (TlaAm) side chains was used, an amine-reactive comonomer that can react with the lysine residues of DERA, as well as with amino groups introduced to a desired support surface. Furthermore disulfide formation after hydrolysis of the Tla groups causes a crosslinking effect. The synthesized copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm)) thus serves a multiple purpose including protein binding, crosslinking and binding to support materials. The mixture of DERA and polymer could be immobilized on the PAN support by spray-coating under partial maintenance of enzymatic activity. To improve the acetaldehyde tolerance, the polymer in used was further equipped with cysteine reactive PDS end-groups that had been used for the conjugation as described in the first part of the thesis. The generated conjugates indeed showed good acetaldehyde tolerance and were thus used to be coated onto PAN membrane supports. Post treatment with a basic aqueous solution of H2O2 was supposed to further crosslink the spray-coated film hydrolysis and oxidation of the thiolactone groups. However, a washing off of the material was observed. Optimization is thus still necessary. N2 - Die vorliegende Arbeit beschreibt die Synthese von Konjugaten aus 2-Deoxy-D-ribose-5-phosphat aldolase (DERA) und geeigneten Polymeren sowie deren nachfolgende Immobilisierung in dünnen Filmen mittels zwei verschiedener Herangehensweisen. DERA ist ein Biokatalysator, der in der Lage ist, Acetaldehyd mit einem weiteren Aldehyd zu enantiomerenreinen Mono- und Dihydroxyaldehyden zu verknüpfen. Diese Verbindungen sind wichtige Strukturmotive für eine Reihe von pharmazeutisch aktiven Verbindungen. Konjugation und Immobilisierung machen das Enzym nutzbar für den Einsatz in einem kontinuierlich betriebenen, biokatalytischen Prozess, welcher das bekannte Problem der Produktinhibierung umgeht. In der vorliegenden Arbeit wurden einerseits Konjugate aus DERA und Poly(N-isopropylacrylamid) (PNIPAm) für die Immobilisierung mittels eines Selbstassemblierungsverfahrens synthetisiert und isoliert, sowie andererseits entsprechende Konjugate mit Poly(N,N-dimethylacrylamid) (PDMAA) für ein vereinfachtes und skalierbares Immobilisierungsverfahren mittels Sprühauftrag hergestellt. Für die DERA/PNIPAm-Konjugate wurden verschiedene Syntheserouten getestet, einschließlich grafting-from und grafting-to. Beide Methoden werden standardmäßig für entsprechende Konjugationen eingesetzt. Weiterhin wurden sowohl die Lysine als auch die Cysteine des Enzyms für die Konjugation herangezogen, um optimale Konjugationsbedingungen zu finden. Konjugation über die Lysine verursachte deutliche Aktivitätsverluste, da ein Lysin auch die Schlüsselrolle im katalytischen Mechanismus des Enzyms spielt. Die Konjugation über die Cysteine sowie einen grafting-to-Ansatz unter Nutzung eines entsprechenden Polymers mit cysteinreaktiver Pyridyldisulfid-Endgruppe (PDS) führte zu einer hohen Konjugationseffizienz, sofern polymersolubilisierendes NaSCN eingesetzt wurde. Die resultierenden Konjugate behielten ihre enzymatische Aktivität bei deutlich gesteigerter Toleranz gegenüber Acetaldehyd. Beide Aspekte sind wichtig für den Einsatz des Enzyms in einem industriell relevanten Prozess nach dem Immobilisierungsschritt. Die DERA/PNIPAm-Konjugate zeigten eine erhöhte Oberflächenaktivität im Vergleich zu den Einzelkomponenten, was eine wichtige Voraussetzung für die Immobilisierung über eine Selbstassemblierung darstellt. Konjugate mit relativ langen Polymerketten bildeten nach dem Selbstassemblierungsschritt homogene Filme auf Silizium-Wafern und Glass-Objektträgern während Konjugate mit kurzen Ketten nur isolierte Aggregate bildeten. Darüber hinaus zeigten die Konjugate mit längeren Ketten einen besseren Erhalt der Enzymaktivität im Zuge der Immobilisierung. Die nachträgliche Vernetzung der Konjugate, sowie ihre feste Anbindung an die Trägermaterialien sind wichtige Voraussetzungen für die mechanische Stabilität des aus dem Selbstassemblierungsschritt erhaltenen Films. Aus diesem Grund wurde in einem zweiten Schritt das UV-vernetzbare Monomer DMMIBA in das für die Konjugation vorgesehene, PNIPAm-basierte Polymer eingeführt. Die Einbindung von DMMIBA setzte die untere kritische Lösungstemperatur (LCST) und damit die Löslichkeit des Polymers in Wasser bei Raumtemperatur herab. Dies führte zu niedrigeren Konjugationseffizienzen und damit zu einer etwas schlechteren Acetaldehydtoleranz der resultierenden Konjugate. Anders als im Fall von DERA/PNIPAm, bildeten die mit P(NIPAM-co-DMMIBA) synthetisierten Konjugate einen homogenen Film nur nach Vernetzung mittels UV-Behandlung aus. Für eine feste Anbindung des vernetzten Films wurde ein Funktionalisierungsprotokoll für das Modell-Trägermaterial aus cycloolefinischem Copolymer (COC) und das letztliche Zielmaterial, PAN-basierte Membranen, entwickelt, welches analoge UV-reaktive Gruppen auf der Trägeroberfläche erzeugt. Die auf COC immobilisierten Konjugate bewahrten ihre Enzymaktivität und zeigten eine gute mechanische Stabilität nach mehreren Aktivitäts-Messzyklen. Der Einsatz von Konjugaten mit längeren Polymerketten führte jedoch zu Filmen mit zu hohem Vernetzungsgrad was einen deutlichen Aktivitätsverlust bedingte. Eine poröse, PAN-basierte Membran, auf welcher die Konjugate ebenso immobilisiert wurden, wurde schlussendlich in ein Dead-End-Filtrationsmodul überführt, um die Aldolreaktion eines industriell relevanten Gemisches aus Acetaldehyd und Hexanal in einem kontinuierlich betriebenen Verfahren durchzuführen. Es konnte Monoaldolprodukt detektiert werden, jedoch waren die Ausbeuten vergleichsweise niedrig, während sich die operative Stabilität als verbesserungswürdig erwies. Ein weiterer Immobilisierungsansatz für DERA-Konjugate, beinhaltete die in-situ-Generierung der Konjugate durch einfaches Vermischen von Enzym und Polymer gefolgt von unmittelbaren Auftrag des Materials auf ein Membranträgermaterial mittels Sprühen. Im Vergleich zum ersten Ansatz lag der Fokus hier mehr auf der Einfachheit und prinzipiellen Skalierbarkeit der Immobilisierung. Daher wurden die Konjugate hier nur in-situ erzeugt und nicht weiter isoliert sowie charakterisiert. Für die Konjugation wurde PDMAA herangezogen, welches mit Thiolactongruppen entlang der Seitenkette ausgerüstet ist. Die Thiolactongruppen sind reaktiv gegenüber Aminen und können daher sowohl mit den Lysineinheiten der DERA reagieren als auch mit Aminogruppen, die im Vorfeld auf dem Trägermaterial erzeugt wurden. Darüber hinaus können durch Hydrolyse der Thiolactoneinheiten sowie anschließender Ausbildung von Disulfidbrücken Vernetzungspunkte erzeugt werden. Das hergestellte Copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm) übernimmt daher mehrere Aufgaben einschließlich Proteinbindung, Vernetzung und Anbindung an das Trägermaterial. Mischungen aus DERA und Polymer konnten durch Sprühauftrag auf funktionalisierten PAN-Trägermaterialien unter teilweisem Erhalt der Enzymaktivität immobilisiert werden. Um auch hier die Acetaldehydtoleranz zu verbessern, wurde das Polymer in einem zweiten Schritt wieder mit PDS-Endgruppen ausgerüstet, die schon zuvor im ersten Teil der Arbeit für die Konjugatsynthese mittels grafting-to herangezogen wurden. Die hergestellten Konjugate zeigten eine gute Acetaldehydtoleranz und wurden daher verwendet, um PAN-Membranen zu beschichten. Eine Nachbehandlung mittels einer basischen Wasserstoffperoxidlösung sollte den aufgesprühten Film vernetzen. Im Ergebnis wurde jedoch ein großer Teil des aufgebrachten Materials im Zuge dieses Schritts heruntergewaschen. Eine weitere Optimierung dieses Schritts ist daher noch notwendig. KW - 2-deoxy-D-ribose-5-phoshphate aldolase KW - enzyme immobilization KW - enzymatically active membrane KW - enzyme/polymer conjugate KW - self-assembly Y1 - 2019 ER - TY - THES A1 - Zeuschner, Steffen Peer T1 - Magnetoacoustics observed with ultrafast x-ray diffraction N2 - In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons. N2 - In der vorliegenden Arbeit untersuche ich die Gitterdynamik von magnetisch geordneten und dünnen Filmen, deren Spinsystem mit Femtosekunden-Laserpulsen angeregt und untersucht wird. Die Quantifizierung der laserinduzierten thermischen Dynamik, der erzeugten Pikosekunden-Schallpulse sowie deren jeweiliger Einfluss auf die Magnetisierungsdynamik ist ein schwieriges Unterfangen. Umso mehr ist die Entwicklung und Anwendung von effizienten experimentellen Konzepten und umfangreichen Modellen grundlegend für das Antreiben des zukünftigen wissenschaftlichen und technologischen Fortschritt. In jedem Experiment dieser kummulativen Dissertation untersuche ich das Kristallgitter von Nanometer dünnen Filmen nach der Anregung mit Femtosekunden-Laserpulsen. Die relative Änderung der Gitterkonstante, hervorgerufen durch thermische Ausdehnung oder Pikosekunden-Schallpulse, wird dabei direkt mittels ultraschneller Röntgenbeugung (UXRD) gemessen. Der Aufbau nutzt zur Bereitstellung von ultrakurzen Röntgenpulsen eine lasergetriebene Plasma-Röntgenquelle (PXS). Phononen und Spins üben gleichermaßen einen Druck auf das Gitter aus, welches entsprechend der elastsischen Eigenschaften des Materials reagiert, was das Gitter zu einem vielseitigen Sensor für ultraschenlle Wechselwirkungen macht. Zum einen untersuche ich Materialien mit starken magnetoelastischen Eigentschaften: die stark magnetostriktive Seltenen-Erden-Verbindung TbFe2, elementares Dysprosium oder das technologisch relavante Invar-Material FePt. Zum anderen habe ich eine umfangreiche Studie der Gitterdynamik von Bi1Y2Fe5O12 (Bi:YIG) angestellt, in dem der Literatur zufolge hochfrequente kohärente Spindynamiken durch Femtosekunden-Laseranregung zu beobachten sind. Diese stehenden Spinwellen (SSWs) höherer Ordnung entstehen durch die kohärente und inkohärente Bewegung von Atomen, in anderen Worten Phononen, welche ich durch UXRD vermessen habe. Somit sind wir in der Lage, die experimentellen Beobachtungen der Gitter- und Spindynamik qualitativ und quantitativ zu vereinigen. Dies geschieht durch eine Kombination von Viel-Temperatur- und Anisotropiemodellierung sowie elastische, magnetoelastische, und mikromagnetsiche Modelle. Die gemeinsamen Daten von UXRD und der zeitaufgelösten magnetooptischen Kerr-Effekt Messungen (tr-MOKE), um jeweils die Gitter- und Spindynamik zu messen, wurden in der Vergangenheit noch an unterschiedlichen experimentellen Aufbauten gemessen. Um die Quantifizierung präziser zu gestalten, haben wir in unserer Arbeitsgruppe UXRD und tr-MOKE in einem einzigen Aufbau kombiniert, welcher somit meines Wissens der erste seiner Art ist. Ich half bei dem Entwurf und der Inbetriebnahme des neuen Aufbaus, welcher die gleichzeitige Messung von Gitter- und Spindynamik auf einer ultraschnellen Zeitskala unter identischen Anregungsbedingungen ermöglicht. Außerdem entwickelte ich eine neue Messroutine für Röntgenbeugung, welche die Messzeit von UXRD-Experimenten um bis zu einer Größenordnungen reduziert. Es nennt sich das Schneiden des reziproken Raumes (reciprocal space slicing, RSS) und nutzt den Vorteil von Flächendetektoren die Bewegung von Beugungsreflexen zu detektieren, was von einer Änderung der Gitterkonstante einhergeht, ohne zeitintensive Scans der Beugungswinkel mit dem Goniometer durchzuführen. RSS ist besonders nützlich für ultraschnelle Beugungsexperimente, weil die Messzeit an Großgeräten wie Synchrotrons oder Freie Elektronen Laser eine seltene und teure Ressource ist. Darüber hinaus ist RSS nicht zwangsläufig auf die Anwendung in ultraschnellen Experimenten beschränkt und kann sogar auf andere Beugungsexperimente, wie die mit Neutronen und Elektronen, ausgeweitet werden. KW - ultrafast KW - X-ray diffraction KW - thin films KW - magnetoelasticity KW - ultraschnell KW - Röntgenbeugung KW - dünne Filme KW - Magnetoelastizität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-561098 ER - TY - THES A1 - Zeppenfeld, Stefan T1 - Vom Gast zum Gastwirt? BT - Türkische Arbeitswelten in West-Berlin T2 - Geschichte der Gegenwart N2 - Die Arbeitsmigration zählt zu den prägenden gesellschaftlichen Wandlungsprozessen der deutschen Nachkriegsgeschichte. 14 Millionen »Gastarbeiter« kamen zwischen 1955 und 1973 in die Bundesrepublik, etwa 3 Millionen von ihnen kehrten nicht in ihre Heimatländer zurück. Vor allem Türkeistämmige blieben nach dem Anwerbestopp häufiger in Deutschland als die Arbeitskräfte aus anderen Ländern. Wie keine andere Stadt steht Berlin bis heute für die Einwanderung aus der Türkei. Stefan Zeppenfeld untersucht den Wandel der türkischen Arbeitswelten von ihren Anfängen in den 1960er Jahren bis zur Wiedervereinigung. Ausgehend von der »Gastarbeit« im industriellen Großbetrieb spürt er in seiner Studie am Beispiel West-Berlins dem Übergang in andere Branchen nach. Er zeigt, wie der öffentliche Dienst auch für Migrantinnen und Migranten attraktive Aufstiegsmöglichkeiten eröffnete, zeichnet den schwierigen Weg in die gewerbliche Selbstständigkeit nach und legt illegale Beschäftigungsformen als alternative Verdienstmöglichkeit offen. Damit bettet der Autor die Geschichte der türkischen Arbeitsmigration in die deutsche Zeitgeschichte ein. Y1 - 2021 SN - 978-3-8353-5022-9 IS - 26 PB - Wallstein-Verlag CY - Göttingen ER - TY - THES A1 - Yishai, Oren T1 - Engineering the reductive glycine pathway in Escherichia coli Y1 - 2019 ER - TY - THES A1 - Witt, Tanja Ivonne T1 - Camera Monitoring at volcanoes T1 - Kameramonitoring an Vulkanen BT - Identification and characterization of lava fountain activity and near-vent processes and their relevance for early warning systems BT - Identifikation und Charakterizierung der Aktivität von Lavafontänen und Near-Vent Prozesse und deren Relevanz für Frühwarnsysteme N2 - Basaltic fissure eruptions, such as on Hawai'i or on Iceland, are thought to be driven by the lateral propagation of feeder dikes and graben subsidence. Associated solid earth processes, such as deformation and structural development, are well studied by means of geophysical and geodetic technologies. The eruptions themselves, lava fountaining and venting dynamics, in turn, have been much less investigated due to hazardous access, local dimension, fast processes, and resulting poor data availability. This thesis provides a detailed quantitative understanding of the shape and dynamics of lava fountains and the morphological changes at their respective eruption sites. For this purpose, I apply image processing techniques, including drones and fixed installed cameras, to the sequence of frames of video records from two well-known fissure eruptions in Hawai'i and Iceland. This way I extract the dimensions of multiple lava fountains, visible in all frames. By putting these results together and considering the acquisition times of the frames I quantify the variations in height, width and eruption velocity of the lava fountains. Then I analyse these time-series in both time and frequency domains and investigate the similarities and correlations between adjacent lava fountains. Following this procedure, I am able to link the dynamics of the individual lava fountains to physical parameters of the magma transport in the feeder dyke of the fountains. The first case study in this thesis focuses on the March 2011 Pu'u'O'o eruption, Hawai'i, where a continuous pulsating behaviour at all eight lava fountains has been observed. The lava fountains, even those from different parts of the fissure that are closely connected, show a similar frequency content and eruption behaviour. The regular pattern in the heights of lava fountain suggests a controlling process within the magma feeder system like a hydraulic connection in the underlying dyke, affecting or even controlling the pulsating behaviour. The second case study addresses the 2014-2015 Holuhraun fissure eruption, Iceland. In this case, the feeder dyke is highlighted by the surface expressions of graben-like structures and fault systems. At the eruption site, the activity decreases from a continuous line of fire of ~60 vents to a limited number of lava fountains. This can be explained by preferred upwards magma movements through vertical structures of the pre-eruptive morphology. Seismic tremors during the eruption reveal vent opening at the surface and/or pressure changes in the feeder dyke. The evolving topography of the cinder cones during the eruption interacts with the lava fountain behaviour. Local variations in the lava fountain height and width are controlled by the conduit diameter, the depth of the lava pond and the shape of the crater. Modelling of the fountain heights shows that long-term eruption behaviour is controlled mainly by pressure changes in the feeder dyke. This research consists of six chapters with four papers, including two first author and two co-author papers. It establishes a new method to analyse lava fountain dynamics by video monitoring. The comparison with the seismicity, geomorphologic and structural expressions of fissure eruptions shows a complex relationship between focussed flow through dykes, the morphology of the cinder cones, and the lava fountain dynamics at the vents of a fissure eruption. N2 - Basaltische Spalteneruptionen, wie auf Hawaii oder Island, werden vermutlich durch die laterale Ausbreitung von Förderdikes und damit verbundener Grabenbildung verursacht. Prozesse der festen Erde sind mittels geophysikalischer und geodätischer Technologien gut erforscht. Die Ausbrüche selbst, d.h. die Lavafontä}nen und die Ventdynamik wiederum wurden aufgrund des gefährlichen Zugangs, der lokalen Dimension, der schnellen Prozesse und der daraus resultierenden schlechten Datenverfügbarkeit kaum untersucht. Diese Arbeit liefert ein detailliertes quantitatives Verständnis über Form und Dynamik von Lavafontänen und der morphologischen Veränderungen an ihren jeweiligen Eruptionsstellen. Mittels Bildverarbeitungstechniken, einschließlich Dronen und festen Kameras, wurden von mir die Videoframes von zwei bekannten Spaltausbrüchen auf Hawaii und Island ausgewertet. Auf diese Weise extrahiere ich die Dimensionen mehrerer Lavafontänen, die in allen Frames sichtbar sind. Durch die Zusammenstellung dieser Ergebnisse und unter Berücksichtigung der Erfassungszeiten quantifiziere ich die Schwankungen in Höhe, Breite und Eruptionsgeschwindigkeit. Dann analysiere ich diese Zeitreihen im Zeit- und Frequenzbereich und untersuche die Ähnlichkeiten und Zusammenhänge zwischen benachbarten Lavafontänen. Anschließend verknüpfte ich die Dynamik der einzelnen Lavafontänen mit den physikalischen Parametern des Magmatransports im Förderdike. Die erste Fallstudie dieser Arbeit konzentriert sich auf die Pu'u'O'o Ausbruch, Hawaii im März 2011, bei der ein kontinuierliches pulsierendes Verhalten an allen Lavafontänen beobachtet werden konnte. Lavafontänen verschiedener Teilsegmenten der Spalte sind eng miteinander verbunden, sie weisen Ähnlichkeiten im Frequenzgehalt und Ausbruchsverhalten auf. Das regelmäßige Muster in den Lavafontänenhöhen deutet auf eine hydraulische Verbindung im darunter liegenden Dike als steuernden Prozess innerhalb des Magma-Fördersystems hin. Die zweite Fallstudie befasst sich mit dem Holuhraun-Ausbruch 2014/2015. In diesem Fall wird der horizontale Förderdike durch grabenartige Strukturen und Bruchsysteme an der Oberfläche hervorgehoben. An der Ausbruchsstelle nimmt die Aktivität von einer kontinuierlichen Feuerlinie auf einzelne Lavafontänen ab. Dies lässt sich durch eine bevorzugte Aufwärtsbewegung des Magmas durch vertikale Strukturen der prä-eruptiven Morphologie erklären. Seismische Erschütterungen während des Ausbruchs zeigen Ventöffnungen an der Oberfläche und/oder Druckveränderungen im Förderdike. Die sich während des Ausbruchs entwickelnde Topographie der Schlackenkegel interagiert mit dem Verhalten der Lavafontänen. Lokale Schwankungen in Höhe und Breite der Lavafontäne werden jedoch durch den Schlotdurchmesser, die Tiefe des Lavaponds und die Form des Kraters gesteuert. Die Modellierung der Fontänenhöhe zeigt, dass das langfristige Ausbruchsverhalten vor allem durch Druckänderungen im Förderdike gesteuert wird. Diese Forschungsarbeit besteht aus sechs Kapiteln mit je zwei Papern als Erst- bzw. Co-Autor. Es etabliert eine neue Methode zur Analyse der Dynamik von Lavafontänen durch Videoüberwachung. Der Vergleich mit der Seismizität, den geomorphologischen und strukturellen Ausprägungen von Spalteneruptionen zeigt einen komplexen Zusammenhang zwischen der Dikeströmung, der Vulkanmorphologie und der Dynamik der Lavafontänen an einer Spalteneruption. KW - volcanology KW - Spalteneruption KW - fissure eruption KW - Vulkanologie KW - lava fountains KW - video analysis KW - basaltic volcanoes KW - Lavafontänen KW - Videoanalyse KW - Basalt-Vulkane Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421073 ER - TY - THES A1 - Wischnewski, Juliane T1 - Reconstructing climate variability on the Tibetan Plateau : comparing aquatic and terrestrial signals T1 - Klimarekonstruktionen auf dem Tibet Plateau : aquatische und terrestrische Signale im Vergleich N2 - Spatial and temporal temperature and moisture patterns across the Tibetan Plateau are very complex. The onset and magnitude of the Holocene climate optimum in the Asian monsoon realm, in particular, is a subject of considerable debate as this time period is often used as an analogue for recent global warming. In the light of contradictory inferences regarding past climate and environmental change on the Tibetan Plateau, I have attempted to explain mismatches in the timing and magnitude of change. Therefore, I analysed the temporal variation of fossil pollen and diatom spectra and the geochemical record from palaeo-ecological records covering different time scales (late Quaternary and the last 200 years) from two core regions in the NE and SE Tibetan Plateau. For interpretation purposes I combined my data with other available palaeo-ecological data to set up corresponding aquatic and terrestrial proxy data sets of two lake pairs and two sets of sites. I focused on the direct comparison of proxies representing lacustrine response to climate signals (e.g., diatoms, ostracods, geochemical record) and proxies representing changes in the terrestrial environment (i.e., terrestrial pollen), in order to asses whether the lake and its catchments respond at similar times and magnitudes to environmental changes. Therefore, I introduced the established numerical technique procrustes rotation as a new approach in palaeoecology to quantitatively compare raw data of any two sedimentary records of interest in order to assess their degree of concordance. Focusing on the late Quaternary, sediment cores from two lakes (Kuhai Lake 35.3°N; 99.2°E; 4150 m asl; and Koucha Lake 34.0°N; 97.2°E; 4540 m asl) on the semi-arid northeastern Tibetan Plateau were analysed to identify post-glacial vegetation and environmental changes, and to investigate the responses of lake ecosystems to such changes. Based on the pollen record, five major vegetation and climate changes could be identified: (1) A shift from alpine desert to alpine steppe indicates a change from cold, dry conditions to warmer and more moist conditions at 14.8 cal. ka BP, (2) alpine steppe with tundra elements points to conditions of higher effective moisture and a stepwise warming climate at 13.6 cal. ka BP, (3) the appearance of high-alpine meadow vegetation indicates a further change towards increased moisture, but with colder temperatures, at 7.0 cal. ka BP, (4) the reoccurrence of alpine steppe with desert elements suggests a return to a significantly colder and drier phase at 6.3 cal. ka BP, and (5) the establishment of alpine steppe-meadow vegetation indicates a change back to relatively moist conditions at 2.2 cal. ka BP. To place the reconstructed climate inferences from the NE Tibetan Plateau into the context of Holocene moisture evolution across the Tibetan Plateau, I applied a five-scale moisture index and average link clustering to all available continuous pollen and non-pollen palaeoclimate records from the Tibetan Plateau, in an attempt to detect coherent regional and temporal patterns of moisture evolution on the Plateau. However, no common temporal or spatial pattern of moisture evolution during the Holocene could be detected, which can be assigned to the complex responses of different proxies to environmental changes in an already very heterogeneous mountain landscape, where minor differences in elevation can result in marked variations in microenvironments. Focusing on the past 200 years, I analysed the sedimentary records (LC6 Lake 29.5°N, 94.3°E, 4132 m asl; and Wuxu Lake 29.9°N, 101.1°E, 3705 m asl) from the southeastern Tibetan Plateau. I found that despite presumed significant temperature increases over that period, pollen and diatom records from the SE Tibetan Plateau reveal only very subtle changes throughout their profiles. The compositional species turnover investigated over the last 200 years appears relatively low in comparison to the species reorganisations during the Holocene. The results indicate that climatically induced ecological thresholds are not yet crossed, but that human activity has an increasing influence, particularly on the terrestrial ecosystem. Forest clearances and reforestation have not caused forest decline in our study area, but a conversion of natural forests to semi-natural secondary forests. The results from the numerical proxy comparison of the two sets of two pairs of Tibetan lakes indicate that the use of different proxies and the work with palaeo-ecological records from different lake types can cause deviant stories of inferred change. Irrespective of the timescale (Holocene or last 200 years) or region (SE or NE Tibetan Plateau) analysed, the agreement in terms of the direction, timing, and magnitude of change between the corresponding terrestrial data sets is generally better than the match between the corresponding lacustrine data sets, suggesting that lacustrine proxies may partly be influenced by in-lake or local catchment processes whereas the terrestrial proxy reflects a more regional climatic signal. The current disaccord on coherent temporal and spatial climate patterns on the Tibetan Plateau can partly be ascribed to the complexity of proxy response and lake systems on the Tibetan Plateau. Therefore, a multi-proxy, multi-site approach is important in order to gain a reliable climate interpretation for the complex mountain landscape of the Tibetan Plateau. N2 - Die räumlichen und zeitlichen Temperatur- und Feuchtigkeitsmuster auf dem Tibet-Plateau sind sehr komplex. Im Einzugsbereich der asiatischen Monsune sind insbesondere der Beginn und das Ausmaß des Klimaoptimums während des Holozäns von wissenschaftlichem Interesse, da diese Periode oft als Analogie für die derzeitige globale Klimaerwärmung herangezogen wird. In Hinblick auf sich teilweise widersprechende Paläoklima- und Umweltrekonstruktionen für das Tibet-Plateau, ist es mein Ziel, die bestehenden Unstimmigkeiten bezüglich des Zeitpunktes und des Ausmaßes des Umweltwandels zu erklären. Dafür wurden von mir zeitliche Variationen fossiler Pollen- und Diatomeenspektren und geochemische Untersuchungen an Seesedimenten unterschiedlicher Zeitskalen (Spätquartär und die letzten 200 Jahre) aus zwei Kernregionen auf dem NO und SO Tibet-Plateau analysiert. Zur Unterstützung der Interpretation wurden die hier erhobenen Daten mit bereits vorhandenen paläoökologischen Aufzeichnungen der Lokalitäten kombiniert, um Datensätze der entsprechenden aquatischen und terrestrischen Proxy-Daten (Stellvertreterdaten) zweier Seenpaare aus den beiden Regionen gegenüberstellen zu können. Hierbei konzentrierte ich mich auf den direkten Vergleich von Proxies, die die Seenentwicklung reflektieren (z.B. Diatomeen, Ostracoden, geochemische Eigenschaften), mit Proxies, die Veränderungen der terrestrischen Umgebung des Sees beschreiben (terrestrische Pollen). Durch diesen Vergleich lässt sich beurteilen, ob Veränderungen im See selbst mit Umweltveränderungen in dem jeweiligen Einzugsgebiet zeitlich übereinstimmen. Dafür habe ich die bereits etablierte numerische Methode Procrustes-Rotation als neuen Ansatz in der Paläoökologie eingeführt. Damit ist ein quantitativer Vergleich von Rohdaten zweier beliebiger sedimentärer Datensätze möglich, um den Grad der Übereinstimmung zu prüfen. Um die in dieser Arbeit rekonstruierten Umwelt- und Klimaereignisse des nordöstlichen Tibet-Plateaus in einen größeren Zusammenhang hinsichtlich holozäner Klimaentwicklung des gesamten Plateaus setzen zu können, und um schlüssige zeitliche und räumliche Klimatrends auf dem Plateau erkennen zu können, habe ich auf alle vorhandenen Paläoklimadatensätze einen Fünf-Skalen Feuchtigkeitsindex und eine Clusteranalyse angewandt. Es konnten jedoch keine einheitlichen zeitlichen und räumlichen Trends der holozänen Klimaentwicklung nachgewiesen werden, was meiner Analyse entsprechend, auf die komplexen Reaktionen verschiedener Proxies auf Umweltveränderungen in einer ohnehin sehr heterogen Berglandschaft, zurückgeführt werden kann. Die Ergebnisse des numerischen Proxy-Vergleichs beider Seenpaare zeigen, dass die Verwendung von verschiedenen Proxies und die Arbeit mit paläo-ökologischen Datensätzen unterschiedlicher See-Typen zu abweichenden Klimaableitungen führen können. Unabhängig vom untersuchten Zeitraum (Holozän oder die letzten 200 Jahren) oder der Region (SO oder NO Tibet-Plateau), ist die Übereinstimmung zweier Datensätze hinsichtlich der Richtung, des Zeitpunktes und des Ausmaßes der abgeleiteten Paläo-Umweltverhältnisse in der Regel zwischen den entsprechenden terrestrischen Datensätzen besser als zwischen den entsprechenden lakustrinen Datensätzen. Die derzeitige Uneinigkeit über stimmige zeitliche und räumliche Klimatrends auf dem Tibet-Plateau kann daher teilweise der Komplexität der verschieden Proxies und ihrer individuellen Empfindlichkeiten gegenüber Umweltveränderungen sowie der unterschiedlichen Reaktionsweise verschiedenartiger See-Systeme auf dem Plateau zugeschrieben werden. Meine Ergebnisse zeigen, dass ein „Multi-Proxy-Multi-Site-Ansatz“ für zuverlässige Paläoklimaableitungen für das Tibet-Plateau von zentraler Bedeutung ist. KW - Tibet Plateau KW - Holozän KW - Pollen KW - Diatomeen KW - Prokrustes Analyse KW - Tibetan Plateau KW - Holocene KW - Pollen KW - Diatoms KW - Procrustes rotation analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52453 ER - TY - THES A1 - Windirsch-Woiwode, Torben T1 - Permafrost carbon stabilisation by recreating a herbivore-driven ecosystem T1 - Stabilisierung von Permafrostkohlenstoff durch die Wiedereinführung eines Herbivor-geprägten Ökosystems N2 - With Arctic ground as a huge and temperature-sensitive carbon reservoir, maintaining low ground temperatures and frozen conditions to prevent further carbon emissions that contrib-ute to global climate warming is a key element in humankind’s fight to maintain habitable con-ditions on earth. Former studies showed that during the late Pleistocene, Arctic ground condi-tions were generally colder and more stable as the result of an ecosystem dominated by large herbivorous mammals and vast extents of graminoid vegetation – the mammoth steppe. Characterised by high plant productivity (grassland) and low ground insulation due to animal-caused compression and removal of snow, this ecosystem enabled deep permafrost aggrad-ation. Now, with tundra and shrub vegetation common in the terrestrial Arctic, these effects are not in place anymore. However, it appears to be possible to recreate this ecosystem local-ly by artificially increasing animal numbers, and hence keep Arctic ground cold to reduce or-ganic matter decomposition and carbon release into the atmosphere. By measuring thaw depth, total organic carbon and total nitrogen content, stable carbon iso-tope ratio, radiocarbon age, n-alkane and alcohol characteristics and assessing dominant vegetation types along grazing intensity transects in two contrasting Arctic areas, it was found that recreating conditions locally, similar to the mammoth steppe, seems to be possible. For permafrost-affected soil, it was shown that intensive grazing in direct comparison to non-grazed areas reduces active layer depth and leads to higher TOC contents in the active layer soil. For soil only frozen on top in winter, an increase of TOC with grazing intensity could not be found, most likely because of confounding factors such as vertical water and carbon movement, which is not possible with an impermeable layer in permafrost. In both areas, high animal activity led to a vegetation transformation towards species-poor graminoid-dominated landscapes with less shrubs. Lipid biomarker analysis revealed that, even though the available organic material is different between the study areas, in both permafrost-affected and sea-sonally frozen soils the organic material in sites affected by high animal activity was less de-composed than under less intensive grazing pressure. In conclusion, high animal activity af-fects decomposition processes in Arctic soils and the ground thermal regime, visible from reduced active layer depth in permafrost areas. Therefore, grazing management might be utilised to locally stabilise permafrost and reduce Arctic carbon emissions in the future, but is likely not scalable to the entire permafrost region. N2 - Mit dem arktischen Boden als riesigem und temperatursensiblen Kohlenstoffspeicher ist die Aufrechterhaltung niedriger Bodentemperaturen und gefrorener Bedingungen zur Verhinde-rung weiterer Kohlenstoffemissionen, die zum globalen Klimawandel beitragen, ein Schlüs-selelement im Kampf der Menschheit, die Erde weiterhin bewohnbar zu halten. Vorangehen-de Studien ergaben, dass die Bodenbedingungen in der Arktis während des späten Pleisto-zäns im Allgemeinen kälter und dadurch stabiler waren, als Ergebnis eines Ökosystems, das von großen pflanzenfressenden Säugetieren und weiten Flächen grasartiger Vegetation do-miniert wurde - der Mammutsteppe. Gekennzeichnet durch hohe Pflanzenproduktivität (Gras-land) und geringe Bodenisolierung aufgrund von Kompression und Schneeräumung durch Tiere, ermöglichte dieses Ökosystem eine tiefreichende Entwicklung des Permafrosts. Heut-zutage, mit der vorherrschenden Tundra- und Strauchvegetation in der Arktis, sind diese Ef-fekte nicht mehr präsent. Es scheint aber möglich, dieses Ökosystem lokal durch künstliche Erhöhung der Tierbestände nachzubilden und somit den arktischen Boden kühl zu halten, um den Abbau von organischem Material und die Freisetzung von Kohlenstoff in die Atmosphäre zu verringern. Durch Messungen der Auftautiefe, des Gesamtgehalts des organischen Kohlenstoffs und Stickstoffs, des stabilen Kohlenstoff-Isotopenverhältnisses, des Radiocarbonalters, der n-Alkan- und Alkoholcharakteristika sowie durch Bestimmung der vorherrschenden Vegetati-onstypen entlang von Beweidungsgradienten in zwei unterschiedlichen arktischen Gebieten habe ich festgestellt, dass die Schaffung ähnlicher Bedingungen wie in der Mammutsteppe möglich sein könnte. Für durch Permafrost beeinflusste Böden konnte ich zeigen, dass eine intensive Beweidung im direkten Vergleich mit unbeweideten Gebieten die Tiefe der Auftau-schicht verringert und zu höheren Gehalten an organischem Kohlenstoff im oberen Bodenbe-reich führt. Für im Winter nur oberflächlich gefrorene Böden konnte kein Anstieg des organi-schen Kohlenstoffgehalts mit zunehmender Beweidungsintensität festgestellt werden, höchstwahrscheinlich aufgrund von Störfaktoren wie vertikalen Wasser- und Kohlenstoffbe-wegungen, die nicht durch eine undurchlässige Schicht wie beim Permafrost begrenzt sind. In beiden Gebieten führte eine hohe Tieraktivität zu einer Umwandlung der Vegetation hin zu artenarmen, von Gräsern dominierten Landschaften mit weniger Sträuchern. Die Analyse von Lipid-Biomarkern ergab, dass das verfügbare organische Material zwar zwischen den Unter-suchungsgebieten unterschiedlich war, aber sowohl in Permafrostgebieten als auch in saiso-nal gefrorenen Böden in Bereichen mit hoher Tieraktivität weniger stark zersetzt war als unter geringerer Beweidungsintensität. Zusammenfassend beeinflusst eine hohe Tieraktivität die Zersetzungsvorgänge in arktischen Böden und das thermische Regime des Bodens, was sich in einer reduzierten Tiefe der Auftauschicht in Permafrostgebieten widerspiegelt. Daher könn-te das Beweidungsmanagement in Zukunft aktiv eingesetzt werden, um den Permafrost lokal zu stabilisieren und gefroren zu halten sowie die Kohlenstoffemissionen in der Arktis zu ver-ringern. Aufgrund der Größe der Fläche, die in der terrestrischen Arktis von Permafrost be-einflusst ist, wird ein solches Beweidungsmanagement aber nicht als Maßnahme auf die ge-samte Permafrostregion ausgedehnt werden können. KW - permafrost KW - carbon KW - climate change KW - grazing KW - Arctic KW - Arktis KW - Kohlenstoff KW - Klimawandel KW - Beweidung KW - Permafrost Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624240 ER - TY - THES A1 - Werhahn, Maria T1 - Simulating galaxy evolution with cosmic rays: the multi-frequency view T1 - Galaxienentwicklung in Simulationen mit komischer Strahlung und deren Strahlungsprozessen N2 - Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM. In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime. I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features. Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra. Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC. Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially. N2 - Kosmische Strahlung (CR) ist ein essentieller Bestandteil des interstellaren Mediums (ISM) von Galaxien und spielt eine wichtige Rolle in deren Entwicklung. Insbesondere ist sie in der Lage, die Dynamik einer Galaxie zu beeinflussen, indem sie galaktische Ausflüsse treibt oder das ISM aufheizt und sich dadurch auf die Effizienz der Sternentstehung auswirkt. Um Galaxienentstehung zu verstehen ist es daher notwendig, diesen nicht-thermischen Bestandteil des ISM genau zu modellieren. Aber außerhalb unserer lokalen Umgebung innerhalb der Milchstraße haben wir keine Möglichkeit, um CRs in anderen Galaxien direkt zu messen. Allerdings gibt es viele Möglichkeiten, CRs indirekt über die Strahlung zu beobachten, die sie auf Grund ihrer Interaktion mit Magnetfeldern und interstellarer Strahlung sowie mit dem ISM emittieren. In dieser Arbeit habe ich einen numerischen Code entwickelt, der die spektrale Verteilung der CRs in Simulationen von isolierten Galaxien berechnet, wobei ein stationäres Verhältnis zwischen Injektion und Kühlen angenommen wird. Des Weiteren berechnet er die nicht-thermischen Strahlungsprozesse, die aus den modellierten CR Protonen- und Elektronenspektren hervorgehen. Diese reichen von Radiowellenlängen bis hin zu hochenergetischer Gammastrahlung. Ich wende diesen Code auf eine Vielzahl von hoch aufgelösten, magneto-hydrodynamischen Simulationen von isolierten Galaxien an, die CRs beinhalten. Das ermöglicht es mir, ihre CR Spektren zu untersuchen und mit Beobachtungen des Voyager-1 Satelliten sowie des AMS-02 Instruments von CR Protonen- und Elektronenspektren zu vergleichen, um dem Ursprung von den gemessenen spektralen Besonderheiten nachzugehen. Außerdem lege ich detaillierte Emissionskarten, Leuchtkräfte und Spektren der nicht-thermischen Strahlung unserer simulierten Galaxien vor, die von Zwerggalaxien über Milchstraßen-ähnliche Galaxien bis hin zu Starburst-Galaxien bei verschiedensten Entwicklungsstadien reichen. Damit kann ich erfolgreich die beobachteten Zusammenhänge zwischen jeweils der Radio- und Gammastrahlungsleuchtkraft mit der Ferninfrarot (FIR) Strahlung der sternbildenden Galaxien reproduzieren, wobei die FIR Strahlung ein guter Indikator für die Rate der Sternentstehung ist. Dabei finde ich heraus, dass Galaxien mit einer hohen Rate an Sternentstehung sehr nah an dem Limit sind, in dem ihre CR Population all ihre Energie an die Produktion von Strahlung verlieren würde, während CRs dazu tendieren, Galaxien mit einer niedrigen Sternentstehungsrate schneller zu verlassen. Zusätzlich untersuche ich die Eigenschaften des Transports von CRs, die benötigt werden, um die beobachteten Spektren der Gammastrahlung zu reproduzieren. Außerdem decke ich die zugrundeliegenden physikalischen Prozesse auf, durch die die Korrelation zwischen der FIR- und Radioleuchtkraft auch in Starburst-Galaxien aufrecht erhalten werden kann und finde heraus, dass die thermische Emission natürlicherweise die beobachteten Radiospektren in Galaxien wie M82 und NGC 253 erklärt, wodurch sich das Rätsel der flachen Radiospektren löst, die scheinbar im Widerspruch zum beobachteten engen Zusammenhang zwischen der FIR- und Radioleuchtkraft standen. Zuletzt hinterfrage ich die Annahme eines stationären Zustandes bei der Modellierung der CR Protonenspektren, indem ich zum ersten Mal den Einfluss von spektral aufgelöstem Transport von CR Protonen in magneto-hydrodynamischen Simulationen auf die hadronische Gammastrahlung von sternbildenden Galaxien untersuche, was neue Einblicke in beobachtbare Signaturen, sowohl spektral als auch räumlich, von CR-Transport ermöglicht. KW - galaxies KW - cosmic rays KW - numerical astrophysics KW - kosmische Strahlung KW - Galaxien KW - numerische Astrophysik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572851 ER - TY - THES A1 - Wenk, Sebastian T1 - Engineering formatotrophic growth in Escherichia coli N2 - To meet the demands of a growing world population while reducing carbon dioxide (CO2) emissions, it is necessary to capture CO2 and convert it into value-added compounds. In recent years, metabolic engineering of microbes has gained strong momentum as a strategy for the production of valuable chemicals. As common microbial feedstocks like glucose directly compete with human consumption, the one carbon (C1) compound formate was suggested as an alternative feedstock. Formate can be easily produced by various means including electrochemical reduction of CO2 and could serve as a feedstock for microbial production, hence presenting a novel entry point for CO2 to the biosphere and a storage option for excess electricity. Compared to the gaseous molecule CO2, formate is a highly soluble compound that can be easily handled and stored. It can serve as a carbon and energy source for natural formatotrophs, but these microbes are difficult to cultivate and engineer. In this work, I present the results of several projects that aim to establish efficient formatotrophic growth of E. coli – which cannot naturally grow on formate – via synthetic formate assimilation pathways. In the first study, I establish a workflow for growth-coupled metabolic engineering of E. coli. I demonstrate this approach by presenting an engineering scheme for the PFL-threonine cycle, a synthetic pathway for anaerobic formate assimilation in E. coli. The described methods are intended to create a standardized toolbox for engineers that aim to establish novel metabolic routes in E. coli and related organisms. The second chapter presents a study on the catalytic efficiency of C1-oxidizing enzymes in vivo. As formatotrophic growth requires generation of both energy and biomass from formate, the engineered E. coli strains need to be equipped with a highly efficient formate dehydrogenase, which provides reduction equivalents and ATP for formate assimilation. I engineered a strain that cannot generate reducing power and energy for cellular growth, when fed on acetate. Under this condition, the strain depends on the introduction of an enzymatic system for NADH regeneration, which could further produce ATP via oxidative phosphorylation. I show that the strain presents a valuable testing platform for C1-oxidizing enzymes by testing different NAD-dependent formate and methanol dehydrogenases in the energy auxotroph strain. Using this platform, several candidate enzymes with high in vivo activity, were identified and characterized as potential energy-generating systems for synthetic formatotrophic or methylotrophic growth in E. coli.   In the third chapter, I present the establishment of the serine threonine cycle (STC) – a synthetic formate assimilation pathway – in E. coli. In this pathway, formate is assimilated via formate tetrahydrofolate ligase (FtfL) from Methylobacterium extorquens (M. extorquens). The carbon from formate is attached to glycine to produce serine, which is converted into pyruvate entering central metabolism. Via the natural threonine synthesis and cleavage route, glycine is regenerated and acetyl-CoA is produced as the pathway product. I engineered several selection strains that depend on different STC modules for growth and determined key enzymes that enable high flux through threonine synthesis and cleavage. I could show that expression of an auxiliary formate dehydrogenase was required to achieve growth via threonine synthesis and cleavage on pyruvate. By overexpressing most of the pathway enzymes from the genome, and applying adaptive laboratory evolution, growth on glycine and formate was achieved, indicating the activity of the complete cycle. The fourth chapter shows the establishment of the reductive glycine pathway (rGP) – a short, linear formate assimilation route – in E. coli. As in the STC, formate is assimilated via M. extorquens FtfL. The C1 from formate is condensed with CO2 via the reverse reaction of the glycine cleavage system to produce glycine. Another carbon from formate is attached to glycine to form serine, which is assimilated into central metabolism via pyruvate. The engineered E. coli strain, expressing most of the pathway genes from the genome, can grow via the rGP with formate or methanol as a sole carbon and energy source. N2 - Um den steigenden Bedarf einer wachsenden Weltbevölkerung zu decken und gleichzeitig die CO2-Emissionen zu reduzieren, ist es notwendig, CO2 aufzufangen und zu recyceln. Durch gentechnische Veränderungen von Mikroorganismen ist es möglich diese zur Produktion wertvoller organischer Verbindungen zu nutzen. Da mikrobielle Kulturen primär mit Glucose gefüttert werden und somit mit menschlicher Nahrungsversorgung konkurrieren, wurde die C1-Verbindung Formiat als alternativer bakterieller Nährstoff vorgeschlagen.. Formiat kann durch unterschiedliche Verfahren hergestellt werden, unter anderem durch elektrochemische Reduktion von CO2. Dieses Verfahren ermöglicht das Recycling von CO2 und weiterhin eine Speichermöglichkeit für überschüssige Elektrizität. Formiat ist im Vergleich zum gasförmigen CO2 gut wasserlöslich, was den Transport und die Verwendung als mikrobiellen Nährstoff erleichtert. Natürlich vorkommende formatotrophe Mikroorganismen nutzen Formiat als Kohlenstoff- und Energiequelle. Diese lassen sich allerdings meist schwierig kultivieren und genetisch verändern. In dieser Arbeit stelle ich die Ergebnisse verschiedener Projekte vor, die gemeinsam darauf abzielen, effizientes formatotrophes Wachstum von E. coli – welches natürlicherweise nicht auf Formiat wachsen kann – mittels synthetischer Formiat-Assimilierungswege zu ermöglichen. In der ersten Studie stelle ich eine Strategie für wachstumsgekoppeltes Stoffwechsel-Engineering in E. coli vor. Ich erläutere diese Strategie anhand eines Beispiels, der schrittweisen Etablierung eines synthetischen Formiat- Assimilierungswegs, des PFL-Threonin-Zyklus. Die in diesem Kapitel beschriebenen Methoden sollen einen Leitfaden für Ingenieure bereitstellen, die neue Stoffwechselwege in E. coli und verwandten Organismen etablieren wollen. Im zweiten Kapitel stelle ich eine Studie über die katalytische Effizienz von C1-oxidierenden Enzymen vor. Da formatotrophes Wachstum sowohl die Erzeugung von Energie als auch von Biomasse aus Formiat erfordert, müssen synthetisch formatotrophe E. coli Stämme mit einer hocheffizienten Formiat-Dehydrogenase ausgestattet werden, welche Reduktionsäquivalente und ATP für die Assimilierung von Formiat liefert. Um die Effizienz verschiedener Enzyme testen und vergleichen zu können, entwickelte ich einen E. coli Stamm, der aus Acetat weder Reduktionsäquivalente noch Energie für das Zellwachstum erzeugen kann. Dieser „energie-auxotrophe“ Stamm benötigt eines zusätzlichen enzymatischen Systems zur NADH-Regenerierung, um auf Acetat wachsen zu können. Ich testete verschiedene NAD-abhängige Formiat- und Methanol-Dehydrogenasen in diesem Stamm und konnte zeigen, dass Wachstum auf Acetat durch Zugabe von Formiat oder Methanol ermöglicht wurde. Dies zeigt, dass der Stamm eine zuverlässige Testplattform für C1-oxidierende Enzyme darstellt. Unter Verwendung dieser Plattform wurden mehrere Kandidatenenzyme mit hoher in vivo-Aktivität identifiziert und als Kandidatenenzyme für synthetisches formatotrophes oder methylotrophes Wachstum in E. coli charakterisiert.   Im dritten Kapitel stelle ich die Etablierung des Serin-Threonin-Zyklus (STZ) – eines synthetischen Formiat-Assimilationswegs – in E. coli vor. In diesem Stoffwechselweg wird Formiat über die Formiat-Tetrahydrofolat-Ligase (FtfL) aus Methylobacterium extorquens (M. extorquens) assimiliert. Der Kohlenstoff aus Formiat wird an Glycin gebunden, um Serin zu produzieren, welches im nächsten Schritt in Pyruvat umgewandelt wird und so in den zentralen Kohlenstoffmetabolismus gelangt. Über den natürlichen Threonin-Synthese- und Spaltweg wird Glycin regeneriert und Acetyl-CoA als Produkt des Stoffwechselwegs generiert. Ich entwickelte mehrere E. coli Selektionsstämme, deren Wachstum von verschiedenen STZ-Modulen abhängt, und konnte Schlüsselenzyme bestimmen, die einen hohen Reaktionsfluss durch die Threonin-Synthese und -Spaltung ermöglichen. Ich konnte zeigen, dass die Expression einer Formiat-Dehydrogenase erforderlich ist, um Wachstum auf Pyruvat über Threonin zu erreichen. Durch Integration und Überexpression der meisten Enzyme des STZ auf Genomebene und Anwendung adaptiver Laborevolution wurde Wachstum auf Glycin und Formiat erreicht, was bedeutet, dass der gesamte Serin-Threonin-Zyklus in E. coli aktiv ist. Das vierte Kapitel zeigt die Etablierung des reduktiven Glycinwegs (rGW) – eines kurzen, linearen Formiat-Assimilierungswegs – in E. coli. Wie im STZ wird Formiat über M. extorquens FtfL assimiliert. Dabei wird das Kohlenstoffatom aus Formiat mit CO2 über die umgekehrte Reaktion des Glycin-Spaltungssystems zu Glycin kondensiert. Ein weiteres Kohlenstoffatom aus Formiat wird an Glycin gebunden, um Serin zu bilden, welches über Pyruvat in den Zentralstoffwechsel gelangt. Durch Expression der rGW Enzyme auf Genomebene und adaptive Laborevolution wurde ein E. coli Stamm erzeugt welcher über den rGW auf Formiat oder Methanol als einziger Kohlenstoff- und Energiequelle wachsen kann. KW - metabolic engineering KW - E. coli KW - formate assimilation KW - methanol assimilation KW - energy metabolism Y1 - 2020 ER - TY - THES A1 - Weber, Jens T1 - Meso- und mikroporöse Hochleistungspolymere : Synthese, Analytik und Anwendungen T1 - Meso- and microporous high performance polymers : synthesis, characterisation and application N2 - Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikroporösen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesoporösen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herauslösen des Silikats mit Ammoniumhydrogendifluorid führt zu mesoporösen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abhängigkeit der beobachteten Porosität vom Massenverhältnis Silikat zu Polymer wurde ebenso untersucht wie die Abhängigkeit der Porosität vom Vernetzergehalt. Die Porosität vollvernetzter Proben zeigt eine lineare Abhängigkeit vom Verhältnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert überschritten, ist teilweiser Porenkollaps zu beobachten. Die Abhängigkeit der Porosität vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der völlige Kollaps einiger Poren bei Stabilität der verbleibenden Poren zu beobachten. Ein komplett unporöses PBI resultiert bei Abwesenheit des Vernetzers. Die mesoporösen PBI-Netzwerke konnten kontrolliert mit Phosphorsäure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitfähigkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in höheren Leitfähigkeiten resultiert. Durch die vernetzte Struktur war des Weiteren genügend mechanische Stabilität gegeben, um die Addukte reversibel und bei sehr guten Leitfähigkeiten bis zu Temperaturen von 190°C bei 0% relativer Feuchtigkeit zu untersuchen. Dies ist für unstrukturierte Phosphorsäure/PBI - Addukte aus linearem PBI nicht möglich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikroporöser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikroporöser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gewählt. Dieses Molekül ist leicht und vielfältig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von löslichen, intrinsisch mikroporösen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosität stark von der molekularen Architektur und der Verarbeitung der Polymere abhängig ist. Die Charakterisierung der Porosität erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelröntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abhängigen Deformationen unterliegen. Die starke Quellung der Proben während des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenfüllung und dadurch induzierter Henry-Sorption, erklärt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikroporöser Polyamid- und Polyimidnetzwerke. Während Polyimidnetzwerke auf Spirobifluorenbasis ausgeprägte Mikroporosität und spezifische Oberflächen von ca. 1100 m²/g aufwiesen, war die Situation für entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosität nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfläche von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikroporösen Polymeren somit etwas genauer gezogen werden. ausgeprägte Mikroporosität kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosität durch Templatierung" und "Mikroporosität durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Präsenz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine höhere Protonenleitfähigkeit im Vergleich zu einem rein mesoporösen PBI aus. Der letzte Teil der Arbeit beschäftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu löslichem oder vernetztem PBI ist in der Salzschmelze möglich. N2 - The first part of the thesis describes the synthesis and characterisation of cross linked, mesoporous poly(benzimidazole) (PBI) prepared by a hard templating approach. Silica nanoparticles were used as template and removed after the polycondensation by immersing the hybrid material in aqueous NH4HF2 solution. The resulting mesoporous PBI showed surface areas up to 200 m²/g as established by N2 BET and porosities up to 37 vol.-%. The influence of the template and cross linker content on the observable porosity was investigated. Nitrogen sorption and small angle x-ray scattering (SAXS) were employed as analytical techniques. The template morphology was reproduced almost perfectly, yielding spherical pores of 11 nm in diameter if the samples were fully cross linked. It was shown that there is a linear dependence of the porosity on the template content up to a critical weight ratio of silica/polymer. If the silica content is raised above 50 wt.-% partial collapse of pores is observed. The dependence of the porosity on the cross linker content at constant amount of template was found to be non-linear. At the absence of any cross linker, no porosity was observed after template removal. At 10 mol-% cross linker the onset of porosity could be observed. At higher cross linker contents, the porosity was nearly the same as for the fully cross linked PBI. The mesoporous PBI could be loaded with crystalline phosphoric acid to yield highly proton conductive materials. It was shown that the material retains its nanostructure when loaded with phosphoric acid even after annealing at 180_C for 12 h. The conductivity of the nanostructured samples was one to two orders of magnitude higher than the conductivity of a nonstructured sample. The impact of the cross linking density on the conductivity was also investigated. The second part of the work describes the synthesis and characterisation of microporous poly(amide)s and poly(imide)s. 9,9'-spirobifluorene derivatives were used to introduce a rigid, structure-directing motif which prevents the polymer chains from close packing. Firstly, the synthesis of soluble poly(amide)s and poly(imide) is described. It was observed that the microporosity is strongly dependent on the processing of the soluble polymers. In the case when polymers were precipitated from solvents of high polarity no microporosity was observed, while polymers prone to solvation in solvents of lower polarity exhibited microporosity as observed in nitrogen sorption measurements. Wide angle x-ray scattering (WAXS) showed that the microstructure was indeed dependent on the processing conditions. SAXS measurements of the polymers revealed that nitrogen sorption alone is not sufficient for the analysis of the porosity. A significant mismatch between the results obtained by the two methods indicated that only a fraction of the pore volume of the polymers was accessible for nitrogen molecules. The second part of the chapter describes the synthesis, characterisation and application of spirobifluorene based, cross linked poly(amide)s and poly(imide)s. The poly(amide) networks did not show any microporosity when analysed by nitrogen sorption. This led to the conclusion that the amide bond is too weak to withstand the interfacial forces. In contrast, poly(imide) networks exhibited pronounced microporosity with surface areas of around 1000 m2/g. The analysis of these networks was again done by nitrogen sorption and SAXS. Furthermore, molecular modelling was used to calculate the true and apparent densities of the networks. In case of the poly(imide) networks, the results of the various measurement techniques were in reasonable agreement. This indicates that the pore volume was nearly completely accessible. Finally it was established that the structure directing motif is necessary to obtain microporous polymers, as a poly(imide) prepared from a spatially undefined monomer did not feature microporosity. Pressure dependent SAXS measurements showed that the polymer networks undergo significant elastic deformations upon evacuation. This behavior complicates the analysis of the nitrogen sorption data, making it impossible to extract reliable pore size distributions. The third and last part of the thesis deals with the development of a new reaction medium for the synthesis of poly(benzimidazole). An eutectic salt melt, composed of lithium chloride and potassium chloride was used in an ionothermal synthesis of linear PBI, opening a green chemistry route towards PBI. The influence of the reaction conditions on the properties of the resulting polymers was investigated. The new reaction medium allowed furthermore the synthesis of linear and cross linked spirobifluorene based PBIs. This is not easily possible by using the classical synthetic pathways towards PBI. The spirobifluorene based PBIs synthesized in this work did, however not feature intrinsic microporosity. KW - poröse Polymere KW - Röntgenkleinwinkelstreuung KW - Gassorption KW - Protonenleitfähigkeit KW - porous polymers KW - small-angle x-ray scattering KW - gas sorption KW - proton conductivity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15994 ER - TY - THES A1 - Videla, Santiago T1 - Reasoning on the response of logical signaling networks with answer set programming T1 - Modellierung Logischer Signalnetzwerke mittels Antwortmengenprogrammierung N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. N2 - Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks. KW - Systembiologie KW - logische Signalnetzwerke KW - Antwortmengenprogrammierung KW - systems biology KW - logical signaling networks KW - answer set programming Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71890 ER - TY - THES A1 - Unterstab, Gunhild T1 - Charakterisierung der viralen Genprodukte p10 und P des Borna Disease Virus T1 - Characterization of the viral gene products p10 and P of the Borna disease virus N2 - Das Borna Disease Virus (BDV, Bornavirus) besitzt ein einzelsträngiges RNA-Genom negativer Polarität und ist innerhalb der Ordnung Mononegavirales der Prototyp einer eigenen Virusfamilie, die der Bornaviridae. Eine außergewöhnliche Eigenschaft des Virus ist seine nukleäre Transkription und Replikation, eine weitere besteht in seiner Fähigkeit, als neurotropes Virus sowohl in vivo als auch in vitro persistente Infektionen zu etablieren. Die zugrunde liegenden Mechanismen sowohl der Replikation als auch der Persistenz sind derzeit noch unzureichend verstanden, auch deshalb, weil das Virus noch relativ „jung“ ist: Erste komplette Sequenzen des RNA-Genoms wurden 1994 publiziert und erst vor einigen Monaten gelang die Generierung rekombinanter Viren auf der Basis klonierter cDNA. Im Mittelpunkt dieser Arbeit standen das p10 Protein und das Phosphoprotein (P), die von der gemeinsamen Transkriptionseinheit II in überlappenden Leserahmen kodiert werden. Als im Kern der Wirtszelle replizierendes Virus ist das Bornavirus auf zelluläre Importmechanismen angewiesen, um den Kernimport aller an der Replikation beteiligten viralen Proteine zu gewährleisten. Das p10 Protein ist ein negativer Regulator der viralen RNA-abhängigen RNA-Polymerase (L). In vitro Importexperimente zeigten, dass p10 über den klassischen Importin alpha/beta abhängigen Kernimportweg in den Nukleus transportiert wird. Dies war unerwartet, da p10 kein vorhersagbares klassisches Kernlokalisierungssignal (NLS) besitzt und weist darauf hin, dass der zelluläre Importapparat offensichtlich flexibler ist als allgemein angenommen. Die ersten 20 N-terminalen AS vermitteln sowohl Kernimport als auch die Bindung an den Importrezeptor Importin alpha. Durch Di-Alanin-Austauschmutagenese wurden die für diesen Transportprozess essentiellen AS identifiziert und die Bedeutung hydrophober und polarer AS-Reste demonstriert. Die Fähigkeit des Bornavirus, persistente Infektionen zu etablieren, wirft die Frage auf, wie das Virus die zellulären antiviralen Abwehrmechanismen, insbesondere das Typ I Interferon (IFN)-System, unterwandert. Das virale P Protein wurde in dieser Arbeit als potenter Antagonist der IFN-Induktion charakterisiert. Es verhindert die Phosphorylierung des zentralen Transkriptionsfaktors IRF3 durch die zelluläre Kinase TBK1 und somit dessen Aktivierung. Der Befund, dass P mit TBK1 Komplexe bildet und zudem auch als Substrat für die zelluläre Kinase fungiert, erlaubt es, erstmalig einen Mechanismus zu postulieren, in dem ein virales Protein (BDV-P) als putatives TBK1-Pseudosubstrat die IRF3-Aktivierung kompetitiv hemmt. N2 - The Borna Disease Virus (BDV) harbors a single stranded RNA genome of negative polarity. Within the order of Mononegavirales it is the prototype of a new virus family named Bornaviridae. Unique features of this neurotrope virus are its nuclear transcription and replication as well as its ability to establish persistent infections both in vivo and in vitro. The underlying mechanisms of BDV replication and persistence are currently not well understood amongst others due to the fact that BDV is quite a young virus: First complete sequences of the RNA genome have been published in 1994. Only a few months ago the generation of a recombinant Bornavirus from cloned cDNA has been accomplished. The work presented here focused on the viral p10 protein and the phosphoprotein P that are both encoded by two overlapping reading frames of the transcription unit II. Nuclear replication of the Bornavirus relies on cellular import mechanisms to allow for nuclear import of viral proteins involved in viral replication. The p10 protein has been described as a negative regulator of the viral RNA dependent RNA polymerase (L). In vitro import experiments revealed that p10 translocates into the nucleus via the classical importin alpha/beta; dependent pathway. This was unexpected since p10 does not contain a predictable classical nuclear localization signal (NLS) suggesting that the cellular import machinery is more flexible than generally believed. The first 20 amino acids mediate nuclear import and binding to the import receptor importin alpha. Analysis of di-alanine-exchange mutants identified essential amino acids and furthermore revealed the impact of hydrophobic and polar side chains in receptor binding and nuclear import. The ability of the Bornavirus to establish persistent infections rises the question of how the virus circumvents cellular antiviral defense mechanisms, in particular the type I interferon system. This work characterizes the viral P protein as a potent antagonist of IFN beta induction. It prevents the activation of the central transcription factor IRF3 by interfering with the cellular kinase TBK1. The finding that P forms complexes with TBK1 and moreover serves as a kinase substrate allows to postulate a mechanism for the first time, in which a viral protein (BDV-P) acts as a putative TBK1 pseudo-substrate and thereby competitively inhibits IRF3 activation. KW - Interferon KW - Borna Disease Virus KW - Kernlokalisierungssignal KW - Importin KW - IRF3 KW - TBK1 KW - Borna disease virus KW - nuclear localization signal KW - importin KW - IRF3 KW - TBK1 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6905 ER - TY - THES A1 - Ulaganathan, Vamseekrishna T1 - Molecular fundamentals of foam fractionation T1 - Molekulare Grundlagen der Schaumfraktionierung N2 - Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution’s pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella – two adsorption layers with a liquid core – the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown. N2 - Die Fraktionierung ist ein Trennprozess, bei dem verschiedene Materialien auf Grund ihrer Eigenschaften voneinander getrennt werden. Bei der Sedimentation von Teilchen in einer Flüssigkeit dient deren unterschiedliche Dichte zu ihrer Trennung, da schwere Teilchen schneller auf den Boden des Gefäßes sinken als leichtere. Bei der Schaumfraktionierung als Trennprozess dient zur Trennung verschiedener Moleküle in einer Lösung deren Grenzflächenaktivität, d.h. das unterschiedliche Vermögen der Moleküle, sich an der Oberfläche von Gasblasen anzureichern. Durch das Aufsteigen der Blasen in der Flüssigkeit werden daher die Moleküle mit der höheren Grenzflächenaktivität stärker in der Schaumschicht angereichert als die weniger stark grenzflächenaktiven Komponenten. Ziel der vorliegenden Dissertation ist es, den Prozess der Schaumfraktionierung hinsichtlich der Trennung von grenzflächenaktiven Molekülen zu analysieren. Die Bildung von Blasen und deren anschließendes Aufsteigen in der Lösung kann als wichtigstes Element in diesem Prozess angesehen werden. Es ist bekannt, dass die Geschwindigkeit aufsteigender Luftblasen in Wasser eine charakteristische Größe ist, die durch die Anwesenheit grenzflächenaktiver Stoffe (Tenside, Proteine) stark verringert wird. Die vorliegende Dissertation zeigt für das ausgewählte Protein ß-Lactoglobulin und für verschiedene Lebensmittel-Tenside, dass die Messung der Aufstiegsgeschwindigkeit von Luftblasen zur Beurteilung der Anreicherung dieser Moleküle an der Blasenoberfläche ausgezeichnet geeignet ist. Die experimentellen Ergebnisse bei verschiedenen Lösungsbedingungen, wie Konzentration von Protein bzw. Tensid, pH-Wert und Ionenstärke der Lösung, zeigen deutlich, dass die Anreicherung der Proteinmoleküle wesentlich stärker ist als die von Tensiden. Dies gilt auch für Tenside mit einer sehr hohen Grenzflächenaktivität, was im Wesentlichen durch die extrem feste (nahezu irreversible) Anreicherung der Proteinmoleküle zu erklären ist. Die erzielten experimentellen Ergebnisse dienen jetzt als Grundlage für die Weiterentwicklung der Theorie aufsteigender Blasen, die besonders von der Dynamik der Anreicherung der Moleküle geprägt ist. Neueste Untersuchungen haben gezeigt, dass auf der Grundlage dieser experimentellen Ergebnisse erstmals die Geschwindigkeitskonstanten der Anreicherung (Adsorption und Desorption) unabhängig voneinander ermittelt werden können. KW - adsorption KW - air-water interface KW - protein KW - foam KW - rising bubble KW - Adsorption KW - Wasser/Luft Grenzflächen KW - steigende Blasen KW - Schaum KW - Beta-Lactoglobulin Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94263 ER - TY - THES A1 - Tattarini, Giulia T1 - A job is good, but is a good job healthier? BT - Longitudinal analyses on the health consequences of unemployment and precarious employment in Europe N2 - What are the consequences of unemployment and precarious employment for individuals' health in Europe? What are the moderating factors that may offset (or increase) the health consequences of labor-market risks? How do the effects of these risks vary across different contexts, which differ in their institutional and cultural settings? Does gender, regarded as a social structure, play a role, and how? To answer these questions is the aim of my cumulative thesis. This study aims to advance our knowledge about the health consequences that unemployment and precariousness cause over the life course. In particular, I investigate how several moderating factors, such as gender, the family, and the broader cultural and institutional context, may offset or increase the impact of employment instability and insecurity on individual health. In my first paper, 'The buffering role of the family in the relationship between job loss and self-perceived health: Longitudinal results from Europe, 2004-2011', I and my co-authors measure the causal effect of job loss on health and the role of the family and welfare states (regimes) as moderating factors. Using EU-SILC longitudinal data (2004-2011), we estimate the probability of experiencing 'bad health' following a transition to unemployment by applying linear probability models and undertake separate analyses for men and women. Firstly, we measure whether changes in the independent variable 'job loss' lead to changes in the dependent variable 'self-rated health' for men and women separately. Then, by adding into the model different interaction terms, we measure the moderating effect of the family, both in terms of emotional and economic support, and how much it varies across different welfare regimes. As an identification strategy, we first implement static fixed-effect panel models, which control for time-varying observables and indirect health selection—i.e., constant unobserved heterogeneity. Secondly, to control for reverse causality and path dependency, we implement dynamic fixed-effect panel models, adding a lagged dependent variable to the model. We explore the role of the family by focusing on close ties within households: we consider the presence of a stable partner and his/her working status as a source of social and economic support. According to previous literature, having a partner should reduce the stress from adverse events, thanks to the symbolic and emotional dimensions that such a relationship entails, regardless of any economic benefits. Our results, however, suggest that benefits linked to the presence of a (female) partner also come from the financial stability that (s)he can provide in terms of a second income. Furthermore, we find partners' employment to be at least as important as the mere presence of the partner in reducing the negative effect of job loss on the individual's health by maintaining the household's standard of living and decreasing economic strain on the family. Our results are in line with previous research, which has highlighted that some people cope better than others with adverse life circumstances, and the support provided by the family is a crucial resource in that regard. We also reported an important interaction between the family and the welfare state in moderating the health consequences of unemployment, showing how the compensation effect of the family varies across welfare regimes. The family plays a decisive role in cushioning the adverse consequences of labor market risks in Southern and Eastern welfare states, characterized by less developed social protection systems and –especially the Southern – high level of familialism. The first paper also found important gender differences concerning job loss, family and welfare effects. Of particular interest is the evidence suggesting that health selection works differently for men and women, playing a more prominent role for women than for men in explaining the relationship between job loss and self-perceived health. The second paper, 'Gender roles and selection mechanisms across contexts: A comparative analysis of the relationship between unemployment, self-perceived health, and gender.' investigates more in-depth the gender differential in health driven by unemployment. Being a highly contested issue in literature, we aim to study whether men are more penalized than women or the other way around and the mechanisms that may explain the gender difference. To do that, we rely on two theoretical arguments: the availability of alternative roles and social selection. The first argument builds on the idea that men and women may compensate for the detrimental health consequences of unemployment through the commitment to 'alternative roles,' which can provide for the resources needed to fulfill people's socially constructed needs. Notably, the availability of alternative options depends on the different positions that men and women have in society. Further, we merge the availability of the 'alternative roles' argument with the health selection argument. We assume that health selection could be contingent on people's social position as defined by gender and, thus, explain the gender differential in the relationship between unemployment and health. Ill people might be less reluctant to fall or remain (i.e., self-select) in unemployment if they have alternative roles. In Western societies, women generally have more alternative roles than men and thus more discretion in their labor market attachment. Therefore, health selection should be stronger for them, explaining why unemployment is less menace for women than for their male counterparts. Finally, relying on the idea of different gender regimes, we extended these arguments to comparison across contexts. For example, in contexts where being a caregiver is assumed to be women's traditional and primary roles and the primary breadwinner role is reserved to men, unemployment is less stigmatized, and taking up alternative roles is more socially accepted for women than for men (Hp.1). Accordingly, social (self)selection should be stronger for women than for men in traditional contexts, where, in the case of ill-health, the separation from work is eased by the availability of alternative roles (Hp.2). By focusing on contexts that are representative of different gender regimes, we implement a multiple-step comparative approach. Firstly, by using EU-SILC longitudinal data (2004-2015), our analysis tests gender roles and selection mechanisms for Sweden and Italy, representing radically different gender regimes, thus providing institutional and cultural variation. Then, we limit institutional heterogeneity by focusing on Germany and comparing East- and West-Germany and older and younger cohorts—for West-Germany (SOEP data 1995-2017). Next, to assess the differential impact of unemployment for men and women, we compared (unemployed and employed) men with (unemployed and employed) women. To do so, we calculate predicted probabilities and average marginal effect from two distinct random-effects probit models. Our first step is estimating random-effects models that assess the association between unemployment and self-perceived health, controlling for observable characteristics. In the second step, our fully adjusted model controls for both direct and indirect selection. We do this using dynamic correlated random-effects (CRE) models. Further, based on the fully adjusted model, we test our hypotheses on alternative roles (Hp.1) by comparing several contexts – models are estimated separately for each context. For this hypothesis, we pool men and women and include an interaction term between unemployment and gender, which has the advantage to allow for directly testing whether gender differences in the effect of unemployment exist and are statistically significant. Finally, we test the role of selection mechanisms (Hp.2), using the KHB method to compare coefficients across nested nonlinear models. Specifically, we test the role of selection for the relationship between unemployment and health by comparing the partially-adjusted and fully-adjusted models. To allow selection mechanisms to operate differently between genders, we estimate separate models for men and women. We found support to our first hypotheses—the context where people are embedded structures the relationship between unemployment, health, and gender. We found no gendered effect of unemployment on health in the egalitarian context of Sweden. Conversely, in the traditional context of Italy, we observed substantive and statistically significant gender differences in the effect of unemployment on bad health, with women suffering less than men. We found the same pattern for comparing East and West Germany and younger and older cohorts in West Germany. On the contrary, our results did not support our theoretical argument on social selection. We found that in Sweden, women are more selected out of employment than men. In contrast, in Italy, health selection does not seem to be the primary mechanism behind the gender differential—Italian men and women seem to be selected out of employment to the same extent. Namely, we do not find any evidence that health selection is stronger for women in more traditional countries (Hp2), despite the fact that the institutional and the cultural context would offer them a more comprehensive range of 'alternative roles' relative to men. Moreover, our second hypothesis is also rejected in the second and third comparisons, where the cross-country heterogeneity is reduced to maximize cultural differences within the same institutional context. Further research that addresses selection into inactivity is needed to evaluate the interplay between selection and social roles across gender regimes. While the health consequences of unemployment have been on the research agenda for a pretty long time, the interest in precarious employment—defined as the linking of the vulnerable worker to work that is characterized by uncertainty and insecurity concerning pay, the stability of the work arrangement, limited access to social benefits, and statutory protections—has emerged only later. Since the 80s, scholars from different disciplines have raised concerns about the social consequences of de-standardization of employment relationships. However, while work has become undoubtedly more precarious, very little is known about its causal effect on individual health and the role of gender as a moderator. These questions are at the core of my third paper : 'Bad job, bad health? A longitudinal analysis of the interaction between precariousness, gender and self-perceived health in Germany'. Herein, I investigate the multidimensional nature of precarious employment and its causal effect on health, particularly focusing on gender differences. With this paper, I aim at overcoming three major shortcomings of earlier studies: The first one regards the cross-sectional nature of data that prevents the authors from ruling out unobserved heterogeneity as a mechanism for the association between precarious employment and health. Indeed, several unmeasured individual characteristics—such as cognitive abilities—may confound the relationship between precarious work and health, leading to biased results. Secondly, only a few studies have directly addressed the role of gender in shaping the relationship. Moreover, available results on the gender differential are mixed and inconsistent: some found precarious employment being more detrimental for women's health, while others found no gender differences or stronger negative association for men. Finally, previous attempts to an empirical translation of the employment precariousness (EP) concept have not always been coherent with their theoretical framework. EP is usually assumed to be a multidimensional and continuous phenomenon; it is characterized by different dimensions of insecurity that may overlap in the same job and lead to different "degrees of precariousness." However, researchers have predominantly focused on one-dimensional indicators—e.g., temporary employment, subjective job insecurity—to measure EP and study the association with health. Besides the fact that this approach partially grasps the phenomenon's complexity, the major problem is the inconsistency of evidence that it has produced. Indeed, this line of inquiry generally reveals an ambiguous picture, with some studies finding substantial adverse effects of temporary over permanent employment, while others report only minor differences. To measure the (causal) effect of precarious work on self-rated health and its variation by gender, I focus on Germany and use four waves from SOEP data (2003, 2007, 2011, and 2015). Germany is a suitable context for my study. Indeed, since the 1980s, the labor market and welfare system have been restructured in many ways to increase the German economy's competitiveness in the global market. As a result, the (standard) employment relationship has been de-standardized: non-standard and atypical employment arrangements—i.e., part-time work, fixed-term contracts, mini-jobs, and work agencies—have increased over time while wages have lowered, even among workers with standard work. In addition, the power of unions has also fallen over the last three decades, leaving a large share of workers without collective protection. Because of this process of de-standardization, the link between wage employment and strong social rights has eroded, making workers more powerless and more vulnerable to labor market risks than in the past. EP refers to this uneven distribution of power in the employment relationship, which can be detrimental to workers' health. Indeed, by affecting individuals' access to power and other resources, EP puts precarious workers at risk of experiencing health shocks and influences their ability to gain and accumulate health advantages (Hp.1). Further, the focus on Germany allows me to investigate my second research question on the gender differential. Germany is usually regarded as a traditionalist gender regime: a context characterized by a configuration of roles. Here, being a caregiver is assumed to be women's primary role, whereas the primary breadwinner role is reserved for men. Although many signs of progress have been made over the last decades towards a greater equalization of opportunities and more egalitarianism, the breadwinner model has barely changed towards a modified version. Thus, women usually take on the double role of workers (the so-called secondary earner) and caregivers, and men still devote most of their time to paid work activities. Moreover, the overall upward trend towards more egalitarian gender ideologies has leveled off over the last decades, moving notably towards more traditional gender ideologies. In this setting, two alternative hypotheses are possible. Firstly, I assume that the negative relationship between EP and health is stronger for women than for men. This is because women are systematically more disadvantaged than men in the public and private spheres of life, having less access to formal and informal sources of power. These gender-related power asymmetries may interact with EP-related power asymmetries resulting in a stronger effect of EP on women's health than on men's health (Hp.2). An alternative way of looking at the gender differential is to consider the interaction that precariousness might have with men's and women's gender identities. According to this view, the negative relationship between EP and health is weaker for women than for men (Hp.2a). In a society with a gendered division of labor and a strong link between masculine identities and stable and well-rewarded job—i.e., a job that confers the role of primary family provider—a male worker with precarious employment might violate the traditional male gender role. Men in precarious jobs may perceive themselves (and by others) as possessing a socially undesirable characteristic, which conflicts with the stereotypical idea of themselves as the male breadwinner. Engaging in behaviors that contradict stereotypical gender identity may decrease self-esteem and foster feelings of inferiority, helplessness, and jealousy, leading to poor health. I develop a new indicator of EP that empirically translates a definition of EP as a multidimensional and continuous phenomenon. I assume that EP is a latent construct composed of seven dimensions of insecurity chosen according to the theory and previous empirical research: Income insecurity, social insecurity, legal insecurity, employment insecurity, working-time insecurity, representation insecurity, worker's vulnerability. The seven dimensions are proxied by eight indicators available in the four waves of the SOEP dataset. The EP composite indicator is obtained by performing a multiple correspondence analysis (MCA) on the eight indicators. This approach aims to construct a summary scale in which all dimensions contribute jointly to the measured experience of precariousness and its health impact. Further, the relationship between EP and 'general self-perceived health' is estimated by applying ordered probit random-effects estimators and calculating average marginal effect (further AME). Then, to control for unobserved heterogeneity, I implement correlated random-effects models that add to the model the within-individual means of the time-varying independent variables. To test the significance of the gender differential, I add an interaction term between EP and gender in the fully adjusted model in the pooled sample. My correlated random-effects models showed EP's negative and substantial 'effect' on self-perceived health for both men and women. Although nonsignificant, the evidence seems in line with previous cross-sectional literature. It supports the hypothesis that employment precariousness could be detrimental to workers' health. Further, my results showed the crucial role of unobserved heterogeneity in shaping the health consequences of precarious employment. This is particularly important as evidence accumulates, yet it is still mostly descriptive. Moreover, my results revealed a substantial difference among men and women in the relationship between EP and health: when EP increases, the risk of experiencing poor health increases much more for men than for women. This evidence falsifies previous theory according to whom the gender differential is contingent on the structurally disadvantaged position of women in western societies. In contrast, they seem to confirm the idea that men in precarious work could experience role conflict to a larger extent than women, as their self-standard is supposed to be the stereotypical breadwinner worker with a good and well-rewarded job. Finally, results from the multiple correspondence analysis contribute to the methodological debate on precariousness, showing that a multidimensional and continuous indicator can express a latent variable of EP. All in all, complementarities are revealed in the results of unemployment and employment precariousness, which have two implications: Policy-makers need to be aware that the total costs of unemployment and precariousness go far beyond the economic and material realm penetrating other fundamental life domains such as individual health. Moreover, they need to balance the trade-off between protecting adequately unemployed people and fostering high-quality employment in reaction to the highlighted market pressures. In this sense, the further development of a (universalistic) welfare state certainly helps mitigate the adverse health effects of unemployment and, therefore, the future costs of both individuals' health and welfare spending. In addition, the presence of a working partner is crucial for reducing the health consequences of employment instability. Therefore, policies aiming to increase female labor market participation should be promoted, especially in those contexts where the welfare state is less developed. Moreover, my results support the significance of taking account of a gender perspective in health research. The findings of the three articles show that job loss, unemployment, and precarious employment, in general, have adverse effects on men's health but less or absent consequences for women's health. Indeed, this suggests the importance of labor and health policies that consider and further distinguish the specific needs of the male and female labor force in Europe. Nevertheless, a further implication emerges: the health consequences of employment instability and de-standardization need to be investigated in light of the gender arrangements and the transforming gender relationships in specific cultural and institutional contexts. My results indeed seem to suggest that women's health advantage may be a transitory phenomenon, contingent on the predominant gendered institutional and cultural context. As the structural difference between men's and women's position in society is eroded, egalitarianism becomes the dominant normative status, so will probably be the gender difference in the health consequences of job loss and precariousness. Therefore, while gender equality in opportunities and roles is a desirable aspect for contemporary societies and a political goal that cannot be postponed further, this thesis raises a further and maybe more crucial question: What kind of equality should be pursued to provide men and women with both good life quality and equal chances in the public and private spheres? In this sense, I believe that social and labor policies aiming to reduce gender inequality in society should focus on improving women's integration into the labor market, implementing policies targeting men, and facilitating their involvement in the private sphere of life. Equal redistribution of social roles could activate a crucial transformation of gender roles and the cultural models that sustain and still legitimate gender inequality in Western societies. KW - unemployment KW - employment precariousness KW - self-rated health KW - gender KW - family KW - welfare and gender regimes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536723 ER - TY - THES A1 - Swierczynski, Tina T1 - A 7000 yr runoff chronology from varved sediments of Lake Mondsee (Upper Austria) T1 - Eine 7000-jährige Abflusschronologie anhand von warvierten Sedimenten des Mondsees (Oberösterreich) N2 - The potential increase in frequency and magnitude of extreme floods is currently discussed in terms of global warming and the intensification of the hydrological cycle. The profound knowledge of past natural variability of floods is of utmost importance in order to assess flood risk for the future. Since instrumental flood series cover only the last ~150 years, other approaches to reconstruct historical and pre-historical flood events are needed. Annually laminated (varved) lake sediments are meaningful natural geoarchives because they provide continuous records of environmental changes > 10000 years down to a seasonal resolution. Since lake basins additionally act as natural sediment traps, the riverine sediment supply, which is preserved as detrital event layers in the lake sediments, can be used as a proxy for extreme discharge events. Within my thesis I examined a ~ 8.50 m long sedimentary record from the pre-Alpine Lake Mondsee (Northeast European Alps), which covered the last 7000 years. This sediment record consists of calcite varves and intercalated detrital layers, which range in thickness from 0.05 to 32 mm. Detrital layer deposition was analysed by a combined method of microfacies analysis via thin sections, Scanning Electron Microscopy (SEM), μX-ray fluorescence (μXRF) scanning and magnetic susceptibility. This approach allows characterizing individual detrital event layers and assigning a corresponding input mechanism and catchment. Based on varve counting and controlled by 14C age dates, the main goals of this thesis are (i) to identify seasonal runoff processes, which lead to significant sediment supply from the catchment into the lake basin and (ii) to investigate flood frequency under changing climate boundary conditions. This thesis follows a line of different time slices, presenting an integrative approach linking instrumental and historical flood data from Lake Mondsee in order to evaluate the flood record inferred from Lake Mondsee sediments. The investigation of eleven short cores covering the last 100 years reveals the abundance of 12 detrital layers. Therein, two types of detrital layers are distinguished by grain size, geochemical composition and distribution pattern within the lake basin. Detrital layers, which are enriched in siliciclastic and dolomitic material, reveal sediment supply from the Flysch sediments and Northern Calcareous Alps into the lake basin. These layers are thicker in the northern lake basin (0.1-3.9 mm) and thinner in the southern lake basin (0.05-1.6 mm). Detrital layers, which are enriched in dolomitic components forming graded detrital layers (turbidites), indicate the provenance from the Northern Calcareous Alps. These layers are generally thicker (0.65-32 mm) and are solely recorded within the southern lake basin. In comparison with instrumental data, thicker graded layers result from local debris flow events in summer, whereas thin layers are deposited during regional flood events in spring/summer. Extreme summer floods as reported from flood layer deposition are principally caused by cyclonic activity from the Mediterranean Sea, e.g. July 1954, July 1997 and August 2002. During the last two millennia, Lake Mondsee sediments reveal two significant flood intervals with decadal-scale flood episodes, during the Dark Ages Cold Period (DACP) and the transition from the Medieval Climate Anomaly (MCA) into the Little Ice Age (LIA) suggesting a linkage of transition to climate cooling and summer flood recurrences in the Northeastern Alps. In contrast, intermediate or decreased flood episodes appeared during the MWP and the LIA. This indicates a non-straightforward relationship between temperature and flood recurrence, suggesting higher cyclonic activity during climate transition in the Northeast Alps. The 7000-year flood chronology reveals 47 debris flows and 269 floods, with increased flood activity shifting around 3500 and 1500 varve yr BP (varve yr BP = varve years before present, before present = AD 1950). This significant increase in flood activity shows a coincidence with millennial-scale climate cooling that is reported from main Alpine glacier advances and lower tree lines in the European Alps since about 3300 cal. yr BP (calibrated years before present). Despite relatively low flood occurrence prior to 1500 varve yr BP, floods at Lake Mondsee could have also influenced human life in early Neolithic lake dwellings (5750-4750 cal. yr BP). While the first lake dwellings were constructed on wetlands, the later lake dwellings were built on piles in the water suggesting an early flood risk adaptation of humans and/or a general change of the Late Neolithic Culture of lake-dwellers because of socio-economic reasons. However, a direct relationship between the final abandonment of the lake dwellings and higher flood frequencies is not evidenced. N2 - Ein verstärktes Auftreten von Hochwassern, sowohl in ihrer Häufigkeit als auch in ihrer Frequenz, wird im Zuge der Klimaerwärmung und einer möglichen Intensivierung des hydrologischen Kreislaufs diskutiert. Die Kenntnis über die natürliche Variabilität von Hochwasserereignissen ist dabei eine grundlegende Voraussetzung, um die Hochwassergefahr für die Zukunft abschätzen zu können. Da instrumentelle Hochwasserzeitreihen meist nur die letzten 150 Jahre abbilden sind andere Methoden erforderlich, um das Auftreten von historischen und prä-historischen Hochwassern festzustellen. Jährlich laminierte (warvierte) Seesedimente sind bedeutende natürliche Archive, denn sie liefern kontinuierliche Zeitreihen > 10000 Jahre mit einer bis zur saisonalen Auflösung. Seebecken stellen natürliche Sedimentfallen dar, wobei eingetragenes Flusssediment in den Seesedimenten als eine distinkte detritische Lage aufgezeichnet wird, und daher zur Rekonstruktion von extremen Abflussereignissen genutzt werden. Im Rahmen meiner Doktorarbeit habe ich einen 8.50 m langen Sedimentkern aus dem Mondsee (Nordostalpen) untersucht, welcher die letzten 7000 Jahre abdeckt. Dieser Sedimentkern besteht aus Kalzitwarven und eingeschalteten detritischen Lagen mit einer Mächtigkeit von 0.05-32 mm. Detritische Lagen wurden mit Hilfe einer kombinierten Methode untersucht: Mikrofaziesanalyse, Rasterelektronenmikroskopie, Röntgenfluoreszenzanalyse (µXRF) und magnetische Suszeptibilität. Dieser Ansatz ermöglicht die Charakterisierung der einzelnen detritischen Lagen bezüglich der Eintragsprozesse und die Lokalisierung des Einzugsgebietes. Auf Grundlage der Warvenzählung und 14C Datierungen sind die wichtigsten Ziele dieser Arbeit: (i) die Identifizierung der Eintragsprozesse, welche zu einem Sedimenteintrag vom Einzugsgebiet bis in den See führen und (ii) die Rekonstruktion der Hochwasserfrequenz unter veränderten Klimabedingungen. Diese Arbeit zeigt eine Untersuchung auf verschiedenen Zeitscheiben, wobei instrumentelle und historische Daten genutzt werden, um die Aufzeichnung von pre-historischen Hochwasser in den Mondseesedimenten besser zu verstehen. Innerhalb der letzten 100 Jahre wurden zwölf Abflussereignisse aufgezeichnet. Zwei Typen von detritschen Lagen können anhand von Korngröße, geochemischer Zusammensetzung und des Verteilungsmusters unterschieden werden. Detritische Lagen, welche aus siliziklastischen und dolomitischen Material bestehen, zeigen eine Sedimentherkunft vom Teileinzugsgebiet des Flysch (nördliches Einzugsgebiet) und der Nördlichen Kalkalpen (südliches Teileinzugsgebiet) auf. Diese Lagen sind im Nördlichen Becken mächtiger (0.1-3.9 mm) als im südlichen Seebecken (0.05-1.6 mm). Detritische Lagen, welche nur aus dolomitischem Material bestehen und Turbititlagen aufzeigen (0.65-32 mm), weisen auf eine Herkunft aus den Nördlichen Kalkalpen hin. Im Vergleich mit instrumentellen Zeitreihen, stammen die mächtigeren Lagen von lokalen Murereignissen im Sommer und feinere Eintragslagen von regionalen Frühjahrs- und Sommerhochwassern. Extreme Sommerhochwasser am Mondsee werden hauptsächlich durch Zyklonen vom Mittelmeer ausgelöst, z.B. Juli 1954, Juli 1997 und August 2002. Die Untersuchung des langen Sedimentkerns vom Mondsee zeigt während der letzten 2000 Jahre signifikante Hochwasserintervalle mit dekadischen Hochwasserepisoden während der Völkerwanderungszeit und im Übergang vom Mittelalter in die Kleine Eiszeit. Dies weist auf eine Verknüpfung von Abkühlungsphasen und Sommerhochwassern im Nordostalpenraum hin. Während der Mittelalterlichen Wärmephase und in der Kleinen Eiszeit kam es jedoch zu einer geringeren Hochwasseraktivität. Dies zeigt einen komplexen Zusammenhang von Temperaturentwicklung und Hochwasseraktivität in den Nordostalpen, mit einer erhöhten Zyklonenaktivät in den Übergängen von wärmeren zu kälteren Phasen. Während der letzten 7000 Jahre wurden 47 Muren und 269 Hochwasser aufgezeichnet, wobei es eine signifikante Änderung mit erhöhter Häufigkeit um 3500 und 1500 Warvenjahre v. h. gab (v.h. = vor heute = AD 1950). Diese signifikante Änderung stimmt mit einem langfristigem Abkühlungstrend überein, welcher durch alpine Gletschervorstöße und das Absinken von Baumgrenzen seit etwa 3300 Warvenjahre v.h. berichtet wird. Trotz relativ geringer Hochwasseraktivität um 1500 Warvenjahre v.h., könnte das Auftreten von Hochwasser auch das Leben Menschen in Neolithischen Pfahlbausiedlungen (5750-4750 cal. yr BP) beeinflusst haben. Während die ersten Pfahlbauten noch als Feuchtbodensiedlungen am Land entstanden, wurden spätere Siedlungen eventuell als Anpassung an stark schwankenden Seewasserspiegeln auf Pfählen im Wasser gebaut und/oder zeigen eine allgemeine Veränderung der Siedlungsaktivitäten der Neolithischen Pfahlbaukultur an, aufgrund sozio-ökonomischer Veränderungen. Ein direkter Zusammenhang zwischen dem Verlassen der Pfahlbausiedlungen und einer erhöhten Hochwasseraktivität konnte jedoch nicht festgestellt werden. KW - Mondsee KW - Paläohochwasser KW - Seesedimente KW - Warven KW - Klimarekonstruktion KW - Mondsee KW - Paleofloods KW - Lake sediments KW - Warves KW - Climate reconstruction Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66702 ER - TY - THES A1 - Swart, Corné T1 - Managing protein activity in A. thaliana BT - A proteomic approach to understanding SUMOylation as well as the regulation of carbohydrate metabolism Y1 - 2017 ER - TY - THES A1 - Störmann, Florian Konstantin T1 - Multifunctional Microballoons for the active and passive control of fluid-flows N2 - Functional materials, also called "Smart Materials", are described by their ability to fulfill a desired task through targeted interaction with its environment. Due to this functional integration, such materials are of increased interest, especially in areas where the increasing micronization of components is required. Modern manufacturing processes (e.g. microfluidics) and the availability of a wide variety of functional materials (e.g. shape memory materials) now enable the production of particle-based switching components. This category includes micropumps and microvalves, whose basic function is the active control of liquid flows. One approach in realizing those microcomponents as pursued by this work, enables variable size-switching of water-filled microballoons by implementing a stimulus-sensitive switching motif in the capsule's membrane shell, while being under the influence of a constant driving force. The switching motif with its gatekeeper function has a critical influence on one or more material parameters, which modulate the capsule's resistance against the driving force in microballoon expansion process. The advantage of this concept is that even non-variable analyte conditions, such as concentration levels of ions, can be capitalized to generate external force fields that, under the control of the membrane, cause an inflation of the microballoon by an osmotically driven water influx. In case of osmotic pressure gradients as the driving force for the capsule expansion, material parameters associated with the gatekeeper function are specifically the permeability and the mechanical stiffness of the shell material. While a modulation of the shell permeability could be utilized to kinetically impede the water influx on large time scales, a modulation of the shell's mechanical stiffness even might be utilized to completely prevent the capsule inflation due to a possible non-deformability beneath a certain threshold pressure. In polymer networks, which are a suitable material class for the demanded capsule shell because of their excellent elasticity, both the permeability and the mechanical properties are strongly influenced by the crystallinity of the material. Since the permeability is effectively reduced with increasing crystallinity, while the mechanical stiffness is simultaneously greatly increased, both effects point in the same direction in terms of their functional relationship. For this reason and due to a reversible and contactless modulation of the membrane crystallinity by heat input, crystallites may be suitable switching motifs for controlling the capsule expansion. As second design element of reversible expandable microballoons, the capsule geometry, defined by an aqueous core enveloped by the temperature-sensitive polymer network membrane, should allow an osmotic pressure gradient across the membrane layer. The strength of the inflation pressure and the associated inflation velocity upon membrane melting should be controlled by the salt concentration within the aqueous core, while a turn in the osmotic gradient should furthermore allow the reversible process of capsule deflation. Therefore, it should be possible to build either microvalves and micropumps, while their intended action of either pumping or valving is determined by their state of expansion and the direction of the osmotic pressure gradient.. Microballoons of approximately 300 µm in diameter were formed via droplet-based microfluidics from double-emulsion templates (w/o/w). The elastomeric capsule membrane was formed by photo-crosslinking of methacrylate (MA) functionalized oligo(ε-caprolactone) precursors (≈ 3.8 MA-arms, Mn ≈ 12000 g mol-1) within the organic medium layer (o) via UV-exposure after droplet-formation. After removal of the toluene/chloroform mixture by slow extraction via the continuous aqueous phase, the capsules solidified under the development of a characteristic "mushroom"-like shape at specific experimental conditions (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min). It could be furthermore shown that in dependency to the process parameters: oligomer concentration and curing-time also spherical capsules were accessible. Long curing-times and high oligomer concentrations at a fixed light-intensity favored the formation of "mushroom"-like capsules, whereas the contrary led to spherical shaped capsules. A comparative study on thin polymer network films of same composition and equal treatment proved a correlation between the film's crosslink density and their contraction capability, while stronger crosslinked polymer networks showed a stronger contraction after solvent removal. In combination with observations during capsule solidification via light-microscopy, where a continuous shaping from almost spherical crosslinked templates to "mushroom"-shaped and solidified capsules was stated, the following mechanism was proposed. In case of low oligomer contents and short curing-times, the contraction of the capsule shell during solvent removal is strongly diminished due to a low degree of crosslinking. Therefore, the solidifying shell could freely collapse onto the aqueous core. In the other case, high oligomer concentrations and long curing-times will favor the formation of highly crosslinked capsule membranes with a strong contraction capability. Due to an observed decentered location of the aqueous core within the swollen polymer network, an uneven radial stress along the capsule's circumference is exerted to the incompressible core. This lead to an uneven contraction during solvent removal and a directed flow of the core fluid into the direction of the minimal stress vector. In consequence, the initially thicker spherical cap contracts, whereas the opposing thinner spherical cap get stretched. The "mushroom"-shape over some advantages over their spherical shaped counterparts, why they were selected for the further experiments. Besides the necessity of a high density of crosslinking for the purpose of extraordinary elasticity and toughness, the form-anisotropy promotes a faster microballoon expandability due to a partial reduction of the membrane thickness. Additionally, pre-stretched regions of thin thickness might provide a better resistance against inflation pressure than spherical but non-stretched capsules of equal membrane thickness. The resulting "mushroom"-shaped microcapsules exhibited a melting point of Tm ≈ 50 - 60 °C and a degree of crystallinity of Xc ≈ 29 - 38 % depending on the membrane thickness and internal salt content, which is slightly lower than for the non-crosslinked oligomer and reasoned by a limited chain mobility upon crosslinking. Nonetheless, the melting transition of the polymer network was associated with a strong drop in its mechanical stiffness, which was shown to have a strong influence on the osmotic driven expansion of the microcapsules. Capsules that were subjected to osmotic pressures between 1.5 and 4.7 MPa did not expand if the temperature was well below the melting point of the capsule's membrane, i.e. at room temperature. In contrast, a continuous expansion, while approaching asymptotically to a final capsule size, was observed if the temperature exceeded the melting point, i.e. 60 °C. Microballoons, which were kept for 56 days at ∆Π = 1.5 MPa and room temperature, did not change significantly in diameter, why the impact of the mechanical stiffness on the expansion behavior is considered to be the greater than the influence of the shell permeability. The time-resolved expansion behavior of the microballoons above their Tm was subsequently modeled, using difusion equations that were corrected for shape anisotropy and elastic restoring forces. A shape-related and expansion dependent pre-factor was used to dynamically address the influence of the shell thickness differences along the circumference on the inflation velocity, whereas the microballoon's elastic contraction upon inflation was rendered by the inclusion of a hyperelastic constitutive model. An important finding resulting from this model was the pronounced increase in inflation velocity compared to hypothetical capsules with a homogeneous shell thickness, which stresses the benefit of employing shape anisotropic balloon-like capsules in this study. Furthermore, the model was able to predict the finite expandability on basis of entropy-elastic recovery forces and strain-hardening effects. A comparison of six different microballoons with different shell thicknesses and internal salt contents showed the linear relationship between the volumetric expansion, the shell thickness and the applied osmotic pressure, as represented by the model. As the proposed model facilitates the prediction of the expansion kinetics depending on the membranes mechanical and diffusional characteristics, it might be a screening tool for future material selections. In course of the microballoon expansion process, capsules of intermediate diameters could be isolated by recrystallization of the membrane, which is mainly caused by a restoration of the membrane's mechanical stiffness and is otherwise difficult to achieve with other stimuli-sensitive systems. The capsule's crystallinity of intermediate expansion states was nearly unchanged, whereas the lamellar crystal size tends to decreased with the expansion ratio. Therefore, it was assumed that the elastic modulus was only minimally altered and might increased due to the networks segment-chain extension. In addition to the volume increase achieved by inflation, a turn in the osmotic gradient also facilitated the reversible deflation, which was shown in inflation/deflation cycles. These both characteristics of the introduced microballoons are important parameter regarding the realization of micropumps and microvalves. The fixation of expanded microcapsules via recrystallization enabled the storage of entropy-elastic strain-energy, which could be utilized for pumping actions in non-aqueous media. Here, the pumping velocity depended on both, the type of surrounding medium and the applied temperature. Surrounding media that supported the fast transport of pumped liquid showed an accelerated deflation, while high temperatures further accelerate the pumping velocity. Very fast rejection of the incorporated payload was furthermore realized with pierced expanded microballoons, which were subjected to temperatures above their Tm. The possible fixation of intermediate particle sizes provide opportunities for vent constructions that allowed the precise adjustment of specific flow-rates and multiple valve openings and closings. A valve construction was realized by the insertion of a single or multiple microballoons in a microfluidic channel. A complete and a partial closing of the microballoon-valves was demonstrated as a function of the heating period. In this context, a difference between the inflation and deflation velocity was stated, summarizing slower expansion kinetics. Overall, microballoons, which presented both on-demand pumping and reversible valving by a temperature-triggered change in the capsule's volume, might be suitable components that help to design fully integrated LOC devices, due to the implementation of the control switch and controllable inflation/deflation kinetics. In comparison to other state of the art stimuli-sensitive materials, one has to highlight the microballoons capability of stabilizing almost continuously intermediate capsule sizes by simple recrystallization of the microballoon's membrane. N2 - Funktionsmaterialien, auch "Smart Materials" genannt, werden durch ihre Fähigkeit, durch die gezielte Interaktion mit seiner Umgebung eine gewünschte Aufgabe zu erfüllen, beschrieben. Aufgrund dieser Funktionsintegration sind solche Materialien vor allem in Bereichen, in denen die zunehmende Mikronisierung von Bauteilen benötigt wird, von gesteigerten Interesse. Moderne Fertigungsverfahren (z..B. Mikrofluidik) und die Verfügbarkeit verschiedenster Funktionsmaterialien (z.B. Formgedächtnismaterialien) ermöglichen heutzutage die Herstellung partikelbasierter Schaltkomponenten. In diese Kategorie fallen unter anderem Mikropumpen und Mikroventile, deren grundsätzliche Funktion die aktive Steuerung von Flüssigkeitsströmen ist. Ein Ansatz zur Realisierung solcher Mikroschalter, der von dieser Arbeit verfolgt wurde, basiert auf wassergefüllten Mikroballons mit einem integrierten stimuli-sensitiven Schaltelement, welche unter dem Einfluss einer konstanten Antriebskraft eine Gröÿenänderung erfahren. Das Schaltmotiv als kontrollierende Instanz entscheidet dabei über die Auswirkung der einwirkenden Kraft auf die Gröÿenänderung durch ihren Einfluss auf einen oder mehrere Materialparameter. Dies ermöglicht die Ausnutzung nicht-variabler Analytbedingungen, wie zum Beispiel Ionenkonzentrationsunterschiede, zur Erzeugung von Kraftfeldern, welche eine Expansion der Mikroballons durch Osmose hervorrufen. Materialparameter welche mit osmotischen Volumenströmen assoziiert sind und diese steuern, sind im Speziellen die Permeabilität und die mechanische Steifigkeit der Kapselmembran. Durch eine Verringerung der Permeabilität kann die Expansionsgeschwindigkeit der Kapseln kinetisch gehemmt und zu langen Zeitperioden hin verschoben werden, wohingegen eine Verstärkung der mechanischen Steifigkeit die Expansion der Kapseln komplett unterbinden kann, indem der angelegte osmotische Druck unterhalb des zur Dehnung notwendigen Schwellendruck liegt.. In Verbindung mit Polymernetzwerken, welche aufgrund ihrer herausragenden Elastizität und Zähfestigkeit eine geeignete Materialklasse für die Herstellung der Kapselmembran darstellen, sind sowohl die Permeabilität als auch die mechanische Steifigkeit mit der Kristallinität des Materials assoziiert. Grundsätzlich kann festgestellt werden, dass die Permeabilität mit der Kristallinität sinkt, wohingegen die Steifigkeit mit ihr steigt. Die Expansion der Kapseln sollte demnach in Abhängigkeit der Kristallinität des Hüllmaterials ermöglicht oder unterbunden werden können, weswegen sich Kristallite als temperatur-sensitive Schaltmotive eignen sollten. Das zweite Designelement von reversibel expandierbaren Mikroballons wird durch die Kapselgeometrie beschrieben, welche sowohl einen wässrigen Kern als auch eine elastomere, semi-permeable Membran aufweist. Diese Kompartimentierung ermöglicht zum einen die Generierung eines osmotischen Druckgradientens zwischen Kapselkern und Umgebung und zum anderen die Erzeugung einer dünnen und umspannenden Polymermembran. Der osmotische Druck als auch die hiermit einhergehende Expansionsgeschwindigkeit nach Aufschmelzen der Kapselmembran sollte durch das Einstellen des Salzgehaltes des Partikelkerns möglich sein. Eine reversible Kapselschrumpfung nach erfolgter Expansion sollte durch Änderungen des äußeren Salzgehaltes zugänglich sein. Auf Basis dieses Konzepts sollten demnach reversibel schaltbare Mikropumpen und Mikroventile realisierbar sein, wobei die Art ihrer Funktion sowohl von ihrem Expansionszustand als auch von der Richtung des osmotischen Druckgradienten abhängt. Die templat-basierte Erzeugung von Mikroballons mit einem Durchmesser von ca. 300 µm erfolgte aus (w/o/w) Doppelemulsionströpfchen mittels Mikrofluidik. Die elastomere Kapselmembran wurde durch Photovernetzung von Methacrylat funktionalisierten oligo(ϵ-caprolacton) Vorläufern (≈ 3.8 MA-Arme, Mn ≈ 12000 g mol-1) aus der organischen Phase (o) und nach Abschluss der Tröpfchenformierung erzeugt. Nach Verfestigung der Kapselmembran durch langsames extrahieren des Lösungsmittelgemisches (Toluol/Chloroform) über die kontinuierliche wässrige Phase, wurden unter bestimmten Reaktionsbedingungen während der Photovernetzung (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min) formanisotrope "pilzförmige" Mikrokapseln erhalten. Es wurde festgestellt, dass über die Syntheseparameter der Oligomerkonzentration und Belichtungszeit, die Formgebung zwischen kugelförmigen und "pilzförmigen" Kapseln gesteuert werden konnte. Im Fall von niedrigen Oligomerkonzentrationen und kurzen Belichtungszeiten wurden kugelförmige Mikrokapseln und ansonsten "pilzförmige" Kapseln erzeugt. In einer vergleichenden Studie an dünnen Polymernetzwerkfilmen gleicher Zusammensetzung und Behandlung konnte ein Zusammenhang zwischen den beiden Syntheseparametern und der Kontraktilität der Filme bestätigt werden, wobei im Falle höherer Oligomerkonzentrationen und längeren Belichtungszeiten eine stärkere Kontraktion der Filme nach Abdampfen des Lösungsmittelgemisches beobachtet werden konnte. Zusammen mit Beobachtungen eines kontinuierlichen Ausprägens der "Pilzform" von initial annähernd kugelförmigen Kapseln im Laufe des Verfestigungsprozesses mittels Lichtmikroskopie wird folgender Mechanismus der Formausprägung vorgeschlagen. Kapseln mit niedriger Vernetzungsdichte zeigen nur eine geringe Kontraktilität, wodurch das Polymernetzwerk nach Extraktion des Lösungsmittelgemisches frei auf der Kernoberfläche kollabieren kann. Stark vernetzte Kapseln weisen hingegen eine sehr starke Schrumpfung infolge des Lösungsmittelverlustes auf. Aufgrund der nicht mittigen Positionierung des wässrigen Kerns mit Abschluss der Tröpfchenbildung und der darauf ausgebildeten inhomogenen Schichtdickenverteilung ergeben sich unterschiedlich starke radiale Spannungsunterschiede entlang der Membran. Bereiche großer Materialstärke kontrahieren infolge stärker und sorgen für eine Verformung des inkompressiblen wässrigen Kerns in Richtung dünnerer Membransegmente, welche daraufhin gedehnt werden. Nach Abschluss der Membranverfestigung liegen demnach entspannte und stark vorgedehnte Membransegmente vor, die aufgrund der Kristallisation konserviert werden. Die "Pilzform" bietet hinsichtlich der Expansionseigenschaften der Mikroballons einige Vorteile gegenüber ihrem kugelförmigen Pendant, weswegen diese für die weiteren Experimente verwendet wurden. Neben den Anforderung hoher Vernetzungsdichten zum Zwecke der geforderten Elastizität, wird durch die Formanisotropie und der damit verbundenen Schichtdickenunterschiede die Expansionsgeschwindigkeit der Kapseln gesteigert. Weiterhin könnte die Vorstreckung der dünnen Membranschichten eine zusätzliche Stabilität gegenüber dem angelegten osmotischen Drucks aufweisen und somit ein ungewolltes Expandieren unterhalb der Schmelztemperatur erschweren. Die resultierenden "pilzförmigen" Mikroballons wiesen je nach eingestellter Schichtdicke und innerer Salzkonzentration, einen Schmelzpunkt von Tm ≈ 50 - 60 °C und einen Kristallisationsgrad von Xc ≈ 29 - 38 % auf, welche verglichen mit dem unvernetzten PCL Homopolymer geringfügig kleiner waren. Dies liegt zum einen an der erhöhten Anzahl von Kettenenden und zum anderen an der eingeschränkten Kettenmobilität infolge der Oligomervernetzung. Es konnte jedoch weiterhin eine starke Verringerung der mechanischen Steifigkeit nach dem Überschreiten der Schmelztemperatur beobachtet werden. Der große Einfluss der Temperatur auf die Expansion der Mikroballons konnte für mehrere Kapseln bestätigt werden. Kapseln welche einem osmotischen Druck von 1.5 bis 4.7 MPa ausgesetzt waren zeigten keine Größenveränderung bei Raumtemperatur, d.h. weit unterhalb der Schmelztemperatur. Im Gegensatz hierzu wurde eine starke Volumenzunahme aller Kapseln nach dem Überschreiten der Schmelztemperatur, bei 60 °C festgestellt. Mikroballons welche für 56 Tage einem osmotischen Druck von 1.5 MPa bei Raumtemperatur ausgesetzt waren zeigten keine signifikanten Volumenänderungen, weswegen insbesondere der Effekt der mechanischen Erweichung ausschlaggebend für das Schaltprinzip gemacht werden kann. Das zeitaufgelöste Expansionsverhalten der Mikroballons oberhalb ihres Schmelzpunktes wurde daraufhin unter Verwendung von Diffusionsgleichungen, welche für die Formanisotropie und elastische Rückstellkräfte korrigiert wurden, modelliert. Ein formabhängiger Vorfaktor, der die Expansionsgeschwindigkeit in Abhängigkeit der Schichtdickenunterschiede und des Expansionszustandes beschreibt, wurde ebenso eingeführt wie ein Term zur Beschreibung der mechanischen Rückstellkräfte auf Basis eines hyperelastischen Materialmodells. Das Model ermöglichte zum einen eine Beschreibung der endlichen Expandierfähigkeit aufgrund entropie-elastischer Rückstellkräfte sowie aufgrund von Kaltverfestigungen, und zum anderen eine deutliche Beschleunigung des Expandiervorganges aufgrund der Kapselanisotropie. Der Vergleich sechs unterschiedlicher Kapseln mit unterschiedlichen Schichtdicken und inneren Salzgehalten zeigte zudem, in Übereinstimmung mit dem Modell, eine lineare Abhängigkeit von Schichtdicke, osmotischen Druck und der Volumenzunahme. Die mit dem Modell einhergehende Vorhersagemöglichkeit der Expansionskinetik hinsichtlich der mechanischen und diffusionsbedingten Materialcharakteristika stellen somit möglicherweise eine Hilfestellung dar, eine zukünftige Materialauswahl zu treffen. Weiterhin konnte gezeigt werden, dass durch Rekristallisation der Kapselmembran und der damit verbundenen Wiederherstellung der mechanischen Steifigkeit, intermediäre Kapselgrößen isoliert werden konnten, was nach besten Wissen des Standes-der-Technik andernfalls nur schwer zu erreichen ist. Ungeachtet des Expansionsgrades konnten nur geringe Änderungen der Kristallinität festgestellt werden, wohingegen die Kristallgröße mit zunehmender Expansion abnahm. Diesbezüglich wird angenommen dass der Elastizitätsmodulus nur geringfügigen Veränderungen unterliegt oder sogar aufgrund einer Kettenversteifung tendenziell zunimmt. Zusätzlich der Betrachtung einer Volumenzunahme, konnte durch die Änderung des Druckgradienten ebenfalls ein Schrumpfen der Kapseln erreicht werden. Die Reversibilität dieses Prozesses wurde in Expansions/Deflations-Zyklen bestätigt und ist eine wichtige Eigenschaft der Mikroballons hinsichtlich ihrer Verwendung als Mikropumpe und Mikroventil. Die Fixierung expandierter Mikrokapseln durch Rekristallisierung der Membran ermöglichte weiterhin eine Pumpfunktion in nicht-wässrigen Medien. Dabei konnte festgestellt werden, dass die Pumpleistung sowohl von dem umgebenden Medium als auch von der applizierten Temperatur abhingen. Medien, die einen schnellen Abtransport der freigesetzten Flüssigkeit ermöglichten, als auch hohe Temperaturen steigerten hierbei die Pumpleistung. Mikroballons mit einer sehr großen Auswurfleistung konnten durch das Einbringen einer Öffnung in die Membran erzeugt werden. Die Fixierung intermediärer Kapselgrößen ermöglichte Ventilkonstruktionen, welche eine präzise Flussrateneinstellung und ein vielfaches öffnen und Schließen des Ventils ermöglichte. Diese Konstruktionen wurden durch das Einbringen eines oder mehrerer Mikroballons realisiert. Ein teilweises und vollkommenes Schließen dieser Mikroballon-basierten Ventilen wurde mit einem periodischen Versuchsaufbau in Abhängigkeit der Heizperiode gezeigt. Dabei wurden unterschiedliche Expansions- und Deflationskinetiken mit einem schnelleren Schrumpfverhalten bestätigt. Zusammenfassend wurden Mikroballons entwickelt, welche sowohl eine "on-demand" Pumpfunktion als auch eine reversible Ventilfunktion aufweisen. Die Implementierung des Schaltmotives in die Partikelmembran sowie die kontrollierbaren Expansions/Deflationskinetiken machen die Mikroballons gegebenenfalls zu geeigneten Komponenten für hochintegrierbare LOC-Systeme. Im Vergleich zu anderen Stimuli-sensitiven Materialien ist die Möglichkeit der nahezu kontinuierlichen Stabilisierung von intermediärer Partikelgrößen hervorzuheben. Dieses Verhalten wird dabei durch Wechselspiel zwischen Materialeigenschaften und Kapselgeometrie erzeugt. KW - microcapsules KW - expansion KW - stimuli-sensitivity KW - microfluidics KW - polymer network KW - Mikrokapseln KW - expandierbar KW - Stimuli-Sensitivität KW - Mikrofluidik KW - Polymernetzwerk Y1 - 2023 ER - TY - THES A1 - Stettner, Samuel T1 - Exploring the seasonality of rapid Arctic changes from space T1 - Erkundung der Saisonalität schneller arktischer Veränderungen aus dem Weltraum BT - monitoring of permafrost disturbance, snow cover and vegetation in tundra environments with TerraSAR-X BT - Überwachung von Permafroststörungen, Schneebedeckung und Vegetation in Tundra-Umgebungen mit TerraSAR-X N2 - Arctic warming has implications for the functioning of terrestrial Arctic ecosystems, global climate and socioeconomic systems of northern communities. A research gap exists in high spatial resolution monitoring and understanding of the seasonality of permafrost degradation, spring snowmelt and vegetation phenology. This thesis explores the diversity and utility of dense TerraSAR-X (TSX) X-Band time series for monitoring ice-rich riverbank erosion, snowmelt, and phenology of Arctic vegetation at long-term study sites in the central Lena Delta, Russia and on Qikiqtaruk (Herschel Island), Canada. In the thesis the following three research questions are addressed: • Is TSX time series capable of monitoring the dynamics of rapid permafrost degradation in ice-rich permafrost on an intra-seasonal scale and can these datasets in combination with climate data identify the climatic drivers of permafrost degradation? • Can multi-pass and multi-polarized TSX time series adequately monitor seasonal snow cover and snowmelt in small Arctic catchments and how does it perform compared to optical satellite data and field-based measurements? • Do TSX time series reflect the phenology of Arctic vegetation and how does the recorded signal compare to in-situ greenness data from RGB time-lapse camera data and vegetation height from field surveys? To answer the research questions three years of TSX backscatter data from 2013 to 2015 for the Lena Delta study site and from 2015 to 2017 for the Qikiqtaruk study site were used in quantitative and qualitative analysis complimentary with optical satellite data and in-situ time-lapse imagery. The dynamics of intra-seasonal ice-rich riverbank erosion in the central Lena Delta, Russia were quantified using TSX backscatter data at 2.4 m spatial resolution in HH polarization and validated with 0.5 m spatial resolution optical satellite data and field-based time-lapse camera data. Cliff top lines were automatically extracted from TSX intensity images using threshold-based segmentation and vectorization and combined in a geoinformation system with manually digitized cliff top lines from the optical satellite data and rates of erosion extracted from time-lapse cameras. The results suggest that the cliff top eroded at a constant rate throughout the entire erosional season. Linear mixed models confirmed that erosion was coupled with air temperature and precipitation at an annual scale, seasonal fluctuations did not influence 22-day erosion rates. The results highlight the potential of HH polarized X-Band backscatter data for high temporal resolution monitoring of rapid permafrost degradation. The distinct signature of wet snow in backscatter intensity images of TSX data was exploited to generate wet snow cover extent (SCE) maps on Qikiqtaruk at high temporal resolution. TSX SCE showed high similarity to Landsat 8-derived SCE when using cross-polarized VH data. Fractional snow cover (FSC) time series were extracted from TSX and optical SCE and compared to FSC estimations from in-situ time-lapse imagery. The TSX products showed strong agreement with the in-situ data and significantly improved the temporal resolution compared to the Landsat 8 time series. The final combined FSC time series revealed two topography-dependent snowmelt patterns that corresponded to in-situ measurements. Additionally TSX was able to detect snow patches longer in the season than Landsat 8, underlining the advantage of TSX for detection of old snow. The TSX-derived snow information provided valuable insights into snowmelt dynamics on Qikiqtaruk previously not available. The sensitivity of TSX to vegetation structure associated with phenological changes was explored on Qikiqtaruk. Backscatter and coherence time series were compared to greenness data extracted from in-situ digital time-lapse cameras and detailed vegetation parameters on 30 areas of interest. Supporting previous results, vegetation height corresponded to backscatter intensity in co-polarized HH/VV at an incidence angle of 31°. The dry, tall shrub dominated ecological class showed increasing backscatter with increasing greenness when using the cross polarized VH/HH channel at 32° incidence angle. This is likely driven by volume scattering of emerging and expanding leaves. Ecological classes with more prostrate vegetation and higher bare ground contributions showed decreasing backscatter trends over the growing season in the co-polarized VV/HH channels likely a result of surface drying instead of a vegetation structure signal. The results from shrub dominated areas are promising and provide a complementary data source for high temporal monitoring of vegetation phenology. Overall this thesis demonstrates that dense time series of TSX with optical remote sensing and in-situ time-lapse data are complementary and can be used to monitor rapid and seasonal processes in Arctic landscapes at high spatial and temporal resolution. N2 - Die Erwärmung der Arktis hat Auswirkungen auf die Stabilität und Funktion terrestrischer arktischer Ökosysteme, auf das globale Klima, sowie auf sozioökonomische Systeme nördlicher Gemeinden. Es besteht eine Forschungslücke bei der Überwachung der Saisonalität von Permafrostdegradation, Schneebedeckung und Vegetationsphänologie. Diese Dissertation untersucht den Nutzen von TerraSAR-X (TSX) X-Band Daten für die Überwachung eisreicher Ufererosion, Schneeschmelze, sowie Phänologie arktischer Vegetation im zentralen Lena Delta in Russland und auf Qikiqtaruk (Herschel Island), Kanada. Die Dynamik intrasaisonaler eisreicher Ufererosion im zentralen Lena-Delta in Russland wurde mit TSX Rückstreuintensitätsbildern quantifiziert und mit optischen Satelliten-Daten und Feldmessungen validiert. Kliff Kanten wurden automatisch aus TSX-Intensitätsbildern extrahiert und in einem Geoinformationssystem mit manuell digitalisierten Kliff Kanten aus optischen Satellitendaten, sowie mit Erosionsraten aus Zeitrafferkameras zusammengeführt. Die Ergebnisse deuten darauf hin, dass sich die Kliff Kante während der gesamten Auftauzeit mit konstanter Geschwindigkeit zurückzog. Die Verwendung von linearen Mischmodellen bestätigte, dass die Erosion im jährlichen Maßstab mit der Lufttemperatur und dem Niederschlag gekoppelt war, saisonale Schwankungen beeinflussten die Erosionsrate nicht. Die Ergebnisse stützen die Verwendung von TSX zur Überwachung schneller Permafrostdegradation mit hoher zeitlicher Auflösung. Die eindeutige Signatur von nassem Schnee in TSX Rückstreuintensitätsbildern wurde genutzt, um Schneeverteilungskarten (SCE) auf Qikiqtaruk in hoher zeitlicher Auflösung zu erzeugen. Aus TSX abgeleitete SCE zeigten eine große Ähnlichkeit zu SCE aus Landsat 8 Daten. Zeitreihen von prozentualer Schneebedeckung (FSC) wurden aus TSX und optischen SCE extrahiert und mit FSC-Schätzungen aus in-situ Zeitrafferkamera Daten verglichen. Auch hier zeigte TSX eine starke Übereinstimmung mit den in-situ-Daten und verbesserte die zeitliche Auflösung im Vergleich zur Landsat 8 Zeitreihe erheblich. Aus einer finalen kombinierten FSC-Zeitreihe konnten zwei Muster von Schneeschmelzen in ausgewählten Einzugsgebieten abgeleitet werden, die sich mit den in-situ Messungen deckten. Zusätzlich konnte TSX später in der Saison Schnee länger erkennen als Landsat 8, was den Vorteil von TSX zur Erkennung von Altschnee unterstreicht. Die TSX-abgeleiteten Schnee-Informationen lieferten wertvolle Einblicke in die Schneeschmelz-Dynamik auf Qikiqtaruk, welche zuvor nicht verfügbar waren. Die Empfindlichkeit von TSX für Vegetationsstruktur, die mit phänologischen Veränderungen einhergeht, wurde auf Qikiqtaruk untersucht. Rückstreu- und Kohärenzzeitreihen wurden aus 30 Testgebieten extrahiert. Die Rückstreu- und Kohärenzsignale wurden mit Vitalitäts-Daten verglichen, die aus in-situ-Zeitrafferkamera Zeitreihen extrahiert wurden. Die Ergebnisse zeigten einen Zusammenhang zwischen Vegetationshöhe und der Rückstreuintensität in HH / VV polarisierten Daten bei einem Einfallswinkel von 31 °. Ferner zeigte die ökologische Klasse mit einer Kombination von hohen Sträuchern und trockenen Oberflächenbedingungen eine zunehmende Rückstreuung mit zunehmende Pflanzenvitalität, wenn der kreuzpolarisierte VH / HH-Kanal bei 32 ° Einfallswinkel verwendet wurde. Die Ergebnisse aus strauchdominierten Klassen sind vielversprechend und liefern eine ergänzende Datenquelle für zeitlich hochaufgelöste Beobachtung der Vegetationsphänologie. Insgesamt zeigt diese Arbeit, dass TSX X-Band-Daten schnelle und saisonale Prozesse in arktischen Landschaften mit hoher räumlicher und zeitlicher Auflösung überwachen können. KW - SAR KW - remote sensing KW - arctic KW - SAR KW - Fernerkundung KW - Arktis Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425783 ER -