TY - THES A1 - Rinne, Theresa Charlotte T1 - The effects of nutrients on bone stem cell function and regeneration N2 - Aging is associated with bone loss, which can lead to osteoporosis and high fracture risk. This coincides with the enhanced formation of bone marrow adipose tissue (BMAT), suggesting a negative effect of bone marrow adipocytes on skeletal health. Increased BMAT formation is also observed in pathologies such as obesity, type 2 diabetes and osteoporosis. However, a subset of bone marrow adipocytes forming the constitutive BMAT (cBMAT), arise early in life in the distal skeleton, contain high levels of unsaturated fatty acids and are thought to provide a physiological function. Regulated BMAT (rBMAT) forms during aging and obesity in proximal regions of the bone and contain a large proportion of saturated fatty acids. Paradoxically, BMAT accumulation is also enhanced during caloric restriction (CR), a life-span extending dietary intervention. This indicates, that different types of BMAT can form in response to opposing nutritional stimuli with potentially different functions. To this end, two types of nutritional interventions, CR and high fat diet (HFD), that are both described to induce BMAT accumulation were carried out. CR markedly increased BMAT formation in the proximal tibia and led to a higher proportion of unsaturated fatty acids, making it similar to the physiological cBMAT. Additionally, proximal and diaphyseal tibia regions displayed higher adiponectin expression. In aged mice, CR was associated with an improved trabecular bone structure. Taken together, these findings demonstrate, that the type of BMAT that forms during CR might provide beneficial effects for local bone stem/progenitor cells and metabolic health. The HFD intervention performed in this thesis showed no effect on BMAT accumulation and bone microstructure. RNA Seq analysis revealed alterations in the composition of the collagen-containing extracellular matrix (ECM). In order to investigate the effects of glucose homeostasis on osteogenesis, differentiation capacity of immortalized multipotent mesenchymal stromal cells (MSCs) and osteochondrogenic progenitor cells (OPCs) was analyzed. Insulin improved differentiation in both cell types, however, combination of with a high glucose concentration led to an impaired mineralization of the ECM. In the MSCs, this was accompanied by the formation of adipocytes, indicating negative effects of the adipocytes formed during hyperglycemic conditions on mineralization processes. However, the altered mineralization pattern and structure of the ECM was also observed in OPCs, which did not form any adipocytes, suggesting further negative effects of a hyperglycemic environment on osteogenic differentiation. In summary, the work provided in this thesis demonstrated that differentiation commitment of bone-resident stem cells can be altered through nutrient availability, specifically glucose. Surprisingly, both high nutrient supply, e.g. the hyperglycemic cell culture conditions, and low nutrient supply, e.g. CR, can induce adipogenic differentiation. However, while CR-induced adipocyte formation was associated with improved trabecular bone structure, adipocyte formation in a hyperglycemic cell-culture environment hampered mineralization. This thesis provides further evidence for the existence of different types of BMAT with specific functions. Y1 - 2024 ER - TY - JOUR A1 - Ogunkola, Moses Olalekan A1 - Guiraudie-Capraz, Gaelle A1 - Féron, François A1 - Leimkühler, Silke T1 - The Human Mercaptopyruvate Sulfurtransferase TUM1 Is Involved in Moco Biosynthesis, Cytosolic tRNA Thiolation and Cellular Bioenergetics in Human Embryonic Kidney Cells JF - Biomolecules N2 - Sulfur is an important element that is incorporated into many biomolecules in humans. The incorporation and transfer of sulfur into biomolecules is, however, facilitated by a series of different sulfurtransferases. Among these sulfurtransferases is the human mercaptopyruvate sulfurtransferase (MPST) also designated as tRNA thiouridine modification protein (TUM1). The role of the human TUM1 protein has been suggested in a wide range of physiological processes in the cell among which are but not limited to involvement in Molybdenum cofactor (Moco) biosynthesis, cytosolic tRNA thiolation and generation of H2S as signaling molecule both in mitochondria and the cytosol. Previous interaction studies showed that TUM1 interacts with the L-cysteine desulfurase NFS1 and the Molybdenum cofactor biosynthesis protein 3 (MOCS3). Here, we show the roles of TUM1 in human cells using CRISPR/Cas9 genetically modified Human Embryonic Kidney cells. Here, we show that TUM1 is involved in the sulfur transfer for Molybdenum cofactor synthesis and tRNA thiomodification by spectrophotometric measurement of the activity of sulfite oxidase and liquid chromatography quantification of the level of sulfur-modified tRNA. Further, we show that TUM1 has a role in hydrogen sulfide production and cellular bioenergetics. KW - Moco biosynthesis KW - sulfite oxidase KW - cytosolic tRNA thiolation KW - 5-methoxycarbonylmethyl-2-thiouridine KW - H2S biosynthesis KW - cellular bioenergetics Y1 - 2023 U6 - https://doi.org/10.3390/biom13010144 SN - 2218-273X VL - 13 SP - 1 EP - 23 PB - MDPI CY - Basel, Schweiz ET - 1 ER - TY - JOUR A1 - Marggraf, Lara Christin A1 - Lindecke, Oliver A1 - Voigt, Christian C. A1 - Pētersons, Gunārs A1 - Voigt-Heucke, Silke Luise T1 - Nathusius’ bats, Pipistrellus nathusii, bypass mating opportunities of their own species, but respond to foraging heterospecifics on migratory transit flights JF - Frontiers in Ecology and Evolution N2 - In late summer, migratory bats of the temperate zone face the challenge of accomplishing two energy-demanding tasks almost at the same time: migration and mating. Both require information and involve search efforts, such as localizing prey or finding potential mates. In non-migrating bat species, playback studies showed that listening to vocalizations of other bats, both con-and heterospecifics, may help a recipient bat to find foraging patches and mating sites. However, we are still unaware of the degree to which migrating bats depend on con-or heterospecific vocalizations for identifying potential feeding or mating opportunities during nightly transit flights. Here, we investigated the vocal responses of Nathusius’ pipistrelle bats, Pipistrellus nathusii, to simulated feeding and courtship aggregations at a coastal migration corridor. We presented migrating bats either feeding buzzes or courtship calls of their own or a heterospecific migratory species, the common noctule, Nyctalus noctula. We expected that during migratory transit flights, simulated feeding opportunities would be particularly attractive to bats, as well as simulated mating opportunities which may indicate suitable roosts for a stopover. However, we found that when compared to the natural silence of both pre-and post-playback phases, bats called indifferently during the playback of conspecific feeding sounds, whereas P. nathusii echolocation call activity increased during simulated feeding of N. noctula. In contrast, the call activity of P. nathusii decreased during the playback of conspecific courtship calls, while no response could be detected when heterospecific call types were broadcasted. Our results suggest that while on migratory transits, P. nathusii circumnavigate conspecific mating aggregations, possibly to save time or to reduce the risks associated with social interactions where aggression due to territoriality might be expected. This avoidance behavior could be a result of optimization strategies by P. nathusii when performing long-distance migratory flights, and it could also explain the lack of a response to simulated conspecific feeding. However, the observed increase of activity in response to simulated feeding of N. noctula, suggests that P. nathusii individuals may be eavesdropping on other aerial hawking insectivorous species during migration, especially if these occupy a slightly different foraging niche. KW - playback KW - phonotaxis KW - bats KW - acoustic communication KW - animal migration KW - eavesdropping KW - echolocation KW - Pipistrellus nathusii Y1 - 2023 U6 - https://doi.org/10.3389/fevo.2022.908560 SN - 2296-701X SP - 1 EP - 10 PB - Frontiers CY - Lausanne, Schweiz ER - TY - THES A1 - Rolo, David T1 - Assembly of photosystem I in thylakoid membranes T1 - Die Assemblierung des Photosystems I in der Thylakoidmembran N2 - The light reactions of photosynthesis are carried out by a series of multiprotein complexes embedded in thylakoid membranes. Among them, photosystem I (PSI), acting as plastocyanin-ferderoxin oxidoreductase, catalyzes the final reaction. Together with light-harvesting antenna I, PSI forms a high-molecular-weight supercomplex of ~600 kDa, consisting of eighteen subunits and nearly two hundred co-factors. Assembly of the various components into a functional thylakoid membrane complex requires precise coordination, which is provided by the assembly machinery. Although this includes a small number of proteins (PSI assembly factors) that have been shown to play a role in the formation of PSI, the process as a whole, as well as the intricacy of its members, remains largely unexplored. In the present work, two approaches were used to find candidate PSI assembly factors. First, EnsembleNet was used to select proteins thought to be functionally related to known PSI assembly factors in Arabidopsis thaliana (approach I), and second, co-immunoprecipitation (Co-IP) of tagged PSI assembly factors in Nicotiana tabacum was performed (approach II). Here, the novel PSI assembly factors designated CO-EXPRESSED WITH PSI ASSEMBLY 1 (CEPA1) and Ycf4-INTERACTING PROTEIN 1 (Y4IP1) were identified. A. thaliana null mutants for CEPA1 and Y4IP1 showed a growth phenotype and pale leaves compared with the wild type. Biophysical experiments using pulse amplitude modulation (PAM) revealed insufficient electron transport on the PSII acceptor side. Biochemical analyses revealed that both CEPA1 and Y4IP1 are specifically involved in PSI accumulation in A. thaliana at the post-translational level but are not essential. Consistent with their roles as factors in the assembly of a thylakoid membrane protein complex, the two proteins localize to thylakoid membranes. Remarkably, cepa1 y4ip1 double mutants exhibited lethal phenotypes in early developmental stages under photoautotrophic growth. Finally, co-IP and native gel experiments supported a possible role for CEPA1 and Y4IP1 in mediating PSI assembly in conjunction with other PSI assembly factors (e.g., PPD1- and PSA3-CEPA1 and Ycf4-Y4IP1). The fact that CEPA1 and Y4IP1 are found exclusively in green algae and higher plants suggests eukaryote-specific functions. Although the specific mechanisms need further investigation, CEPA1 and Y4IP1 are two novel assembly factors that contribute to PSI formation. N2 - Die Lichtreaktionen der Photosynthese werden von einer Reihe von Multiproteinkomplexen durchgeführt, die in Thylakoidmembranen eingebettet sind. Hier katalysiert das Photosystem I (PSI), das als Plastocyanin-Ferderoxin-Oxidoreduktase fungiert, die letzte Reaktion. Zusammen mit der lichtsammelnden Antenne I bildet PSI einen hochmolekularen Superkomplex von etwa 600 kDa, der aus achtzehn Untereinheiten und fast zweihundert Co-Faktoren besteht. Der Zusammenbau der verschiedenen Komponenten zu einem funktionsfähigen Thylakoidmembrankomplex erfordert eine präzise Koordination, die durch den Assemblierungsapparat gewährleistet wird. Obwohl dieser eine kleine Anzahl von Proteinen (PSI-Assemblierungsfaktoren) umfasst, die nachweislich eine Rolle bei der Bildung des PSI spielen, ist der Prozess als Ganzes sowie die Komplexität seiner Mitglieder noch weitgehend unerforscht. In der vorliegenden Arbeit wurden zwei Ansätze verwendet, um Kandidaten für PSI-Assemblierungsfaktoren zu finden. Erstens wurde EnsembleNet verwendet, um Proteine auszuwählen, von denen angenommen wird, dass sie funktionell mit bekannten PSI-Assemblierungsfaktoren in Arabidopsis thaliana verwandt sind (Ansatz I), und zweitens wurde eine Co-Immunopräzipitation (Co-IP) von markierten PSI-Assemblierungsfaktoren in Nicotiana tabacum durchgeführt (Ansatz II). Dabei wurden die neuartigen PSI-Assemblierungsfaktoren mit der Bezeichnung CO-EXPRESSED WITH PSI ASSEMBLY 1 (CEPA1) und Ycf4-INTERACTING PROTEIN 1 (Y4IP1) identifiziert. A. thaliana Nullmutanten für CEPA1 und Y4IP1 zeigten einen Wachstumsphänotyp und blasse Blätter im Vergleich zum Wildtyp. Biophysikalische Experimente unter Verwendung der Pulsamplitudenmodulation (PAM) zeigten einen unzureichenden Elektronentransport auf der PSII-Akzeptorseite. Biochemische Analysen ergaben, dass sowohl CEPA1 als auch Y4IP1 spezifisch an der PSI-Akkumulation in A. thaliana auf posttranslationaler Ebene beteiligt, jedoch nicht essentiell sind. Entsprechend ihrer Rolle als Faktoren für den Aufbau eines Thylakoidmembran-Proteinkomplexes sind die beiden Proteine an Thylakoidmembranen lokalisiert. Bemerkenswerterweise wiesen cepa1 y4ip1-Doppelmutanten in frühen Entwicklungsstadien unter photoautotrophem Wachstum tödliche Phänotypen auf. Schließlich untermauerten Co-IP- und native Gelexperimente eine mögliche Rolle von CEPA1 und Y4IP1 bei der Vermittlung des PSI-Aufbaus in Verbindung mit anderen PSI-Aufbaufaktoren (z. B. PPD1- und PSA3-CEPA1, und Ycf4-Y4IP1). Die Tatsache, dass CEPA1 und Y4IP1 ausschließlich in Grünalgen und höheren Pflanzen vorkommen, lässt auf eukaryontenspezifische Funktionen schließen. Obwohl die spezifischen Mechanismen noch weiter untersucht werden müssen, sind CEPA1 und Y4IP1 zwei neuartige Assemblierungsfaktoren, die zur PSI-Bildung beitragen. KW - photosynthesis KW - photosystem I KW - biogenesis KW - thylakoid membranes KW - assembly factor KW - Photosynthese KW - Photosystem I KW - Biogenese KW - Thylakoidmembran KW - Assemblierungsfaktor Y1 - 2023 ER - TY - JOUR A1 - Smith, Taylor A1 - Zotta, Ruxandra-Maria A1 - Boulton, Chris A. A1 - Lenton, Timothy M. A1 - Dorigo, Wouter A1 - Boers, Niklas T1 - Reliability of resilience estimation based on multi-instrument time series JF - Earth System Dynamics N2 - Many widely used observational data sets are comprised of several overlapping instrument records. While data inter-calibration techniques often yield continuous and reliable data for trend analysis, less attention is generally paid to maintaining higher-order statistics such as variance and autocorrelation. A growing body of work uses these metrics to quantify the stability or resilience of a system under study and potentially to anticipate an approaching critical transition in the system. Exploring the degree to which changes in resilience indicators such as the variance or autocorrelation can be attributed to non-stationary characteristics of the measurement process – rather than actual changes in the dynamical properties of the system – is important in this context. In this work we use both synthetic and empirical data to explore how changes in the noise structure of a data set are propagated into the commonly used resilience metrics lag-one autocorrelation and variance. We focus on examples from remotely sensed vegetation indicators such as vegetation optical depth and the normalized difference vegetation index from different satellite sources. We find that time series resulting from mixing signals from sensors with varied uncertainties and covering overlapping time spans can lead to biases in inferred resilience changes. These biases are typically more pronounced when resilience metrics are aggregated (for example, by land-cover type or region), whereas estimates for individual time series remain reliable at reasonable sensor signal-to-noise ratios. Our work provides guidelines for the treatment and aggregation of multi-instrument data in studies of critical transitions and resilience. Y1 - 2023 U6 - https://doi.org/10.5194/esd-14-173-2023 SN - 2190-4987 VL - 14 SP - 173 EP - 183 PB - Copernicus Publications CY - Göttingen ER - TY - THES A1 - Störmann, Florian Konstantin T1 - Multifunctional Microballoons for the active and passive control of fluid-flows N2 - Functional materials, also called "Smart Materials", are described by their ability to fulfill a desired task through targeted interaction with its environment. Due to this functional integration, such materials are of increased interest, especially in areas where the increasing micronization of components is required. Modern manufacturing processes (e.g. microfluidics) and the availability of a wide variety of functional materials (e.g. shape memory materials) now enable the production of particle-based switching components. This category includes micropumps and microvalves, whose basic function is the active control of liquid flows. One approach in realizing those microcomponents as pursued by this work, enables variable size-switching of water-filled microballoons by implementing a stimulus-sensitive switching motif in the capsule's membrane shell, while being under the influence of a constant driving force. The switching motif with its gatekeeper function has a critical influence on one or more material parameters, which modulate the capsule's resistance against the driving force in microballoon expansion process. The advantage of this concept is that even non-variable analyte conditions, such as concentration levels of ions, can be capitalized to generate external force fields that, under the control of the membrane, cause an inflation of the microballoon by an osmotically driven water influx. In case of osmotic pressure gradients as the driving force for the capsule expansion, material parameters associated with the gatekeeper function are specifically the permeability and the mechanical stiffness of the shell material. While a modulation of the shell permeability could be utilized to kinetically impede the water influx on large time scales, a modulation of the shell's mechanical stiffness even might be utilized to completely prevent the capsule inflation due to a possible non-deformability beneath a certain threshold pressure. In polymer networks, which are a suitable material class for the demanded capsule shell because of their excellent elasticity, both the permeability and the mechanical properties are strongly influenced by the crystallinity of the material. Since the permeability is effectively reduced with increasing crystallinity, while the mechanical stiffness is simultaneously greatly increased, both effects point in the same direction in terms of their functional relationship. For this reason and due to a reversible and contactless modulation of the membrane crystallinity by heat input, crystallites may be suitable switching motifs for controlling the capsule expansion. As second design element of reversible expandable microballoons, the capsule geometry, defined by an aqueous core enveloped by the temperature-sensitive polymer network membrane, should allow an osmotic pressure gradient across the membrane layer. The strength of the inflation pressure and the associated inflation velocity upon membrane melting should be controlled by the salt concentration within the aqueous core, while a turn in the osmotic gradient should furthermore allow the reversible process of capsule deflation. Therefore, it should be possible to build either microvalves and micropumps, while their intended action of either pumping or valving is determined by their state of expansion and the direction of the osmotic pressure gradient.. Microballoons of approximately 300 µm in diameter were formed via droplet-based microfluidics from double-emulsion templates (w/o/w). The elastomeric capsule membrane was formed by photo-crosslinking of methacrylate (MA) functionalized oligo(ε-caprolactone) precursors (≈ 3.8 MA-arms, Mn ≈ 12000 g mol-1) within the organic medium layer (o) via UV-exposure after droplet-formation. After removal of the toluene/chloroform mixture by slow extraction via the continuous aqueous phase, the capsules solidified under the development of a characteristic "mushroom"-like shape at specific experimental conditions (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min). It could be furthermore shown that in dependency to the process parameters: oligomer concentration and curing-time also spherical capsules were accessible. Long curing-times and high oligomer concentrations at a fixed light-intensity favored the formation of "mushroom"-like capsules, whereas the contrary led to spherical shaped capsules. A comparative study on thin polymer network films of same composition and equal treatment proved a correlation between the film's crosslink density and their contraction capability, while stronger crosslinked polymer networks showed a stronger contraction after solvent removal. In combination with observations during capsule solidification via light-microscopy, where a continuous shaping from almost spherical crosslinked templates to "mushroom"-shaped and solidified capsules was stated, the following mechanism was proposed. In case of low oligomer contents and short curing-times, the contraction of the capsule shell during solvent removal is strongly diminished due to a low degree of crosslinking. Therefore, the solidifying shell could freely collapse onto the aqueous core. In the other case, high oligomer concentrations and long curing-times will favor the formation of highly crosslinked capsule membranes with a strong contraction capability. Due to an observed decentered location of the aqueous core within the swollen polymer network, an uneven radial stress along the capsule's circumference is exerted to the incompressible core. This lead to an uneven contraction during solvent removal and a directed flow of the core fluid into the direction of the minimal stress vector. In consequence, the initially thicker spherical cap contracts, whereas the opposing thinner spherical cap get stretched. The "mushroom"-shape over some advantages over their spherical shaped counterparts, why they were selected for the further experiments. Besides the necessity of a high density of crosslinking for the purpose of extraordinary elasticity and toughness, the form-anisotropy promotes a faster microballoon expandability due to a partial reduction of the membrane thickness. Additionally, pre-stretched regions of thin thickness might provide a better resistance against inflation pressure than spherical but non-stretched capsules of equal membrane thickness. The resulting "mushroom"-shaped microcapsules exhibited a melting point of Tm ≈ 50 - 60 °C and a degree of crystallinity of Xc ≈ 29 - 38 % depending on the membrane thickness and internal salt content, which is slightly lower than for the non-crosslinked oligomer and reasoned by a limited chain mobility upon crosslinking. Nonetheless, the melting transition of the polymer network was associated with a strong drop in its mechanical stiffness, which was shown to have a strong influence on the osmotic driven expansion of the microcapsules. Capsules that were subjected to osmotic pressures between 1.5 and 4.7 MPa did not expand if the temperature was well below the melting point of the capsule's membrane, i.e. at room temperature. In contrast, a continuous expansion, while approaching asymptotically to a final capsule size, was observed if the temperature exceeded the melting point, i.e. 60 °C. Microballoons, which were kept for 56 days at ∆Π = 1.5 MPa and room temperature, did not change significantly in diameter, why the impact of the mechanical stiffness on the expansion behavior is considered to be the greater than the influence of the shell permeability. The time-resolved expansion behavior of the microballoons above their Tm was subsequently modeled, using difusion equations that were corrected for shape anisotropy and elastic restoring forces. A shape-related and expansion dependent pre-factor was used to dynamically address the influence of the shell thickness differences along the circumference on the inflation velocity, whereas the microballoon's elastic contraction upon inflation was rendered by the inclusion of a hyperelastic constitutive model. An important finding resulting from this model was the pronounced increase in inflation velocity compared to hypothetical capsules with a homogeneous shell thickness, which stresses the benefit of employing shape anisotropic balloon-like capsules in this study. Furthermore, the model was able to predict the finite expandability on basis of entropy-elastic recovery forces and strain-hardening effects. A comparison of six different microballoons with different shell thicknesses and internal salt contents showed the linear relationship between the volumetric expansion, the shell thickness and the applied osmotic pressure, as represented by the model. As the proposed model facilitates the prediction of the expansion kinetics depending on the membranes mechanical and diffusional characteristics, it might be a screening tool for future material selections. In course of the microballoon expansion process, capsules of intermediate diameters could be isolated by recrystallization of the membrane, which is mainly caused by a restoration of the membrane's mechanical stiffness and is otherwise difficult to achieve with other stimuli-sensitive systems. The capsule's crystallinity of intermediate expansion states was nearly unchanged, whereas the lamellar crystal size tends to decreased with the expansion ratio. Therefore, it was assumed that the elastic modulus was only minimally altered and might increased due to the networks segment-chain extension. In addition to the volume increase achieved by inflation, a turn in the osmotic gradient also facilitated the reversible deflation, which was shown in inflation/deflation cycles. These both characteristics of the introduced microballoons are important parameter regarding the realization of micropumps and microvalves. The fixation of expanded microcapsules via recrystallization enabled the storage of entropy-elastic strain-energy, which could be utilized for pumping actions in non-aqueous media. Here, the pumping velocity depended on both, the type of surrounding medium and the applied temperature. Surrounding media that supported the fast transport of pumped liquid showed an accelerated deflation, while high temperatures further accelerate the pumping velocity. Very fast rejection of the incorporated payload was furthermore realized with pierced expanded microballoons, which were subjected to temperatures above their Tm. The possible fixation of intermediate particle sizes provide opportunities for vent constructions that allowed the precise adjustment of specific flow-rates and multiple valve openings and closings. A valve construction was realized by the insertion of a single or multiple microballoons in a microfluidic channel. A complete and a partial closing of the microballoon-valves was demonstrated as a function of the heating period. In this context, a difference between the inflation and deflation velocity was stated, summarizing slower expansion kinetics. Overall, microballoons, which presented both on-demand pumping and reversible valving by a temperature-triggered change in the capsule's volume, might be suitable components that help to design fully integrated LOC devices, due to the implementation of the control switch and controllable inflation/deflation kinetics. In comparison to other state of the art stimuli-sensitive materials, one has to highlight the microballoons capability of stabilizing almost continuously intermediate capsule sizes by simple recrystallization of the microballoon's membrane. N2 - Funktionsmaterialien, auch "Smart Materials" genannt, werden durch ihre Fähigkeit, durch die gezielte Interaktion mit seiner Umgebung eine gewünschte Aufgabe zu erfüllen, beschrieben. Aufgrund dieser Funktionsintegration sind solche Materialien vor allem in Bereichen, in denen die zunehmende Mikronisierung von Bauteilen benötigt wird, von gesteigerten Interesse. Moderne Fertigungsverfahren (z..B. Mikrofluidik) und die Verfügbarkeit verschiedenster Funktionsmaterialien (z.B. Formgedächtnismaterialien) ermöglichen heutzutage die Herstellung partikelbasierter Schaltkomponenten. In diese Kategorie fallen unter anderem Mikropumpen und Mikroventile, deren grundsätzliche Funktion die aktive Steuerung von Flüssigkeitsströmen ist. Ein Ansatz zur Realisierung solcher Mikroschalter, der von dieser Arbeit verfolgt wurde, basiert auf wassergefüllten Mikroballons mit einem integrierten stimuli-sensitiven Schaltelement, welche unter dem Einfluss einer konstanten Antriebskraft eine Gröÿenänderung erfahren. Das Schaltmotiv als kontrollierende Instanz entscheidet dabei über die Auswirkung der einwirkenden Kraft auf die Gröÿenänderung durch ihren Einfluss auf einen oder mehrere Materialparameter. Dies ermöglicht die Ausnutzung nicht-variabler Analytbedingungen, wie zum Beispiel Ionenkonzentrationsunterschiede, zur Erzeugung von Kraftfeldern, welche eine Expansion der Mikroballons durch Osmose hervorrufen. Materialparameter welche mit osmotischen Volumenströmen assoziiert sind und diese steuern, sind im Speziellen die Permeabilität und die mechanische Steifigkeit der Kapselmembran. Durch eine Verringerung der Permeabilität kann die Expansionsgeschwindigkeit der Kapseln kinetisch gehemmt und zu langen Zeitperioden hin verschoben werden, wohingegen eine Verstärkung der mechanischen Steifigkeit die Expansion der Kapseln komplett unterbinden kann, indem der angelegte osmotische Druck unterhalb des zur Dehnung notwendigen Schwellendruck liegt.. In Verbindung mit Polymernetzwerken, welche aufgrund ihrer herausragenden Elastizität und Zähfestigkeit eine geeignete Materialklasse für die Herstellung der Kapselmembran darstellen, sind sowohl die Permeabilität als auch die mechanische Steifigkeit mit der Kristallinität des Materials assoziiert. Grundsätzlich kann festgestellt werden, dass die Permeabilität mit der Kristallinität sinkt, wohingegen die Steifigkeit mit ihr steigt. Die Expansion der Kapseln sollte demnach in Abhängigkeit der Kristallinität des Hüllmaterials ermöglicht oder unterbunden werden können, weswegen sich Kristallite als temperatur-sensitive Schaltmotive eignen sollten. Das zweite Designelement von reversibel expandierbaren Mikroballons wird durch die Kapselgeometrie beschrieben, welche sowohl einen wässrigen Kern als auch eine elastomere, semi-permeable Membran aufweist. Diese Kompartimentierung ermöglicht zum einen die Generierung eines osmotischen Druckgradientens zwischen Kapselkern und Umgebung und zum anderen die Erzeugung einer dünnen und umspannenden Polymermembran. Der osmotische Druck als auch die hiermit einhergehende Expansionsgeschwindigkeit nach Aufschmelzen der Kapselmembran sollte durch das Einstellen des Salzgehaltes des Partikelkerns möglich sein. Eine reversible Kapselschrumpfung nach erfolgter Expansion sollte durch Änderungen des äußeren Salzgehaltes zugänglich sein. Auf Basis dieses Konzepts sollten demnach reversibel schaltbare Mikropumpen und Mikroventile realisierbar sein, wobei die Art ihrer Funktion sowohl von ihrem Expansionszustand als auch von der Richtung des osmotischen Druckgradienten abhängt. Die templat-basierte Erzeugung von Mikroballons mit einem Durchmesser von ca. 300 µm erfolgte aus (w/o/w) Doppelemulsionströpfchen mittels Mikrofluidik. Die elastomere Kapselmembran wurde durch Photovernetzung von Methacrylat funktionalisierten oligo(ϵ-caprolacton) Vorläufern (≈ 3.8 MA-Arme, Mn ≈ 12000 g mol-1) aus der organischen Phase (o) und nach Abschluss der Tröpfchenformierung erzeugt. Nach Verfestigung der Kapselmembran durch langsames extrahieren des Lösungsmittelgemisches (Toluol/Chloroform) über die kontinuierliche wässrige Phase, wurden unter bestimmten Reaktionsbedingungen während der Photovernetzung (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min) formanisotrope "pilzförmige" Mikrokapseln erhalten. Es wurde festgestellt, dass über die Syntheseparameter der Oligomerkonzentration und Belichtungszeit, die Formgebung zwischen kugelförmigen und "pilzförmigen" Kapseln gesteuert werden konnte. Im Fall von niedrigen Oligomerkonzentrationen und kurzen Belichtungszeiten wurden kugelförmige Mikrokapseln und ansonsten "pilzförmige" Kapseln erzeugt. In einer vergleichenden Studie an dünnen Polymernetzwerkfilmen gleicher Zusammensetzung und Behandlung konnte ein Zusammenhang zwischen den beiden Syntheseparametern und der Kontraktilität der Filme bestätigt werden, wobei im Falle höherer Oligomerkonzentrationen und längeren Belichtungszeiten eine stärkere Kontraktion der Filme nach Abdampfen des Lösungsmittelgemisches beobachtet werden konnte. Zusammen mit Beobachtungen eines kontinuierlichen Ausprägens der "Pilzform" von initial annähernd kugelförmigen Kapseln im Laufe des Verfestigungsprozesses mittels Lichtmikroskopie wird folgender Mechanismus der Formausprägung vorgeschlagen. Kapseln mit niedriger Vernetzungsdichte zeigen nur eine geringe Kontraktilität, wodurch das Polymernetzwerk nach Extraktion des Lösungsmittelgemisches frei auf der Kernoberfläche kollabieren kann. Stark vernetzte Kapseln weisen hingegen eine sehr starke Schrumpfung infolge des Lösungsmittelverlustes auf. Aufgrund der nicht mittigen Positionierung des wässrigen Kerns mit Abschluss der Tröpfchenbildung und der darauf ausgebildeten inhomogenen Schichtdickenverteilung ergeben sich unterschiedlich starke radiale Spannungsunterschiede entlang der Membran. Bereiche großer Materialstärke kontrahieren infolge stärker und sorgen für eine Verformung des inkompressiblen wässrigen Kerns in Richtung dünnerer Membransegmente, welche daraufhin gedehnt werden. Nach Abschluss der Membranverfestigung liegen demnach entspannte und stark vorgedehnte Membransegmente vor, die aufgrund der Kristallisation konserviert werden. Die "Pilzform" bietet hinsichtlich der Expansionseigenschaften der Mikroballons einige Vorteile gegenüber ihrem kugelförmigen Pendant, weswegen diese für die weiteren Experimente verwendet wurden. Neben den Anforderung hoher Vernetzungsdichten zum Zwecke der geforderten Elastizität, wird durch die Formanisotropie und der damit verbundenen Schichtdickenunterschiede die Expansionsgeschwindigkeit der Kapseln gesteigert. Weiterhin könnte die Vorstreckung der dünnen Membranschichten eine zusätzliche Stabilität gegenüber dem angelegten osmotischen Drucks aufweisen und somit ein ungewolltes Expandieren unterhalb der Schmelztemperatur erschweren. Die resultierenden "pilzförmigen" Mikroballons wiesen je nach eingestellter Schichtdicke und innerer Salzkonzentration, einen Schmelzpunkt von Tm ≈ 50 - 60 °C und einen Kristallisationsgrad von Xc ≈ 29 - 38 % auf, welche verglichen mit dem unvernetzten PCL Homopolymer geringfügig kleiner waren. Dies liegt zum einen an der erhöhten Anzahl von Kettenenden und zum anderen an der eingeschränkten Kettenmobilität infolge der Oligomervernetzung. Es konnte jedoch weiterhin eine starke Verringerung der mechanischen Steifigkeit nach dem Überschreiten der Schmelztemperatur beobachtet werden. Der große Einfluss der Temperatur auf die Expansion der Mikroballons konnte für mehrere Kapseln bestätigt werden. Kapseln welche einem osmotischen Druck von 1.5 bis 4.7 MPa ausgesetzt waren zeigten keine Größenveränderung bei Raumtemperatur, d.h. weit unterhalb der Schmelztemperatur. Im Gegensatz hierzu wurde eine starke Volumenzunahme aller Kapseln nach dem Überschreiten der Schmelztemperatur, bei 60 °C festgestellt. Mikroballons welche für 56 Tage einem osmotischen Druck von 1.5 MPa bei Raumtemperatur ausgesetzt waren zeigten keine signifikanten Volumenänderungen, weswegen insbesondere der Effekt der mechanischen Erweichung ausschlaggebend für das Schaltprinzip gemacht werden kann. Das zeitaufgelöste Expansionsverhalten der Mikroballons oberhalb ihres Schmelzpunktes wurde daraufhin unter Verwendung von Diffusionsgleichungen, welche für die Formanisotropie und elastische Rückstellkräfte korrigiert wurden, modelliert. Ein formabhängiger Vorfaktor, der die Expansionsgeschwindigkeit in Abhängigkeit der Schichtdickenunterschiede und des Expansionszustandes beschreibt, wurde ebenso eingeführt wie ein Term zur Beschreibung der mechanischen Rückstellkräfte auf Basis eines hyperelastischen Materialmodells. Das Model ermöglichte zum einen eine Beschreibung der endlichen Expandierfähigkeit aufgrund entropie-elastischer Rückstellkräfte sowie aufgrund von Kaltverfestigungen, und zum anderen eine deutliche Beschleunigung des Expandiervorganges aufgrund der Kapselanisotropie. Der Vergleich sechs unterschiedlicher Kapseln mit unterschiedlichen Schichtdicken und inneren Salzgehalten zeigte zudem, in Übereinstimmung mit dem Modell, eine lineare Abhängigkeit von Schichtdicke, osmotischen Druck und der Volumenzunahme. Die mit dem Modell einhergehende Vorhersagemöglichkeit der Expansionskinetik hinsichtlich der mechanischen und diffusionsbedingten Materialcharakteristika stellen somit möglicherweise eine Hilfestellung dar, eine zukünftige Materialauswahl zu treffen. Weiterhin konnte gezeigt werden, dass durch Rekristallisation der Kapselmembran und der damit verbundenen Wiederherstellung der mechanischen Steifigkeit, intermediäre Kapselgrößen isoliert werden konnten, was nach besten Wissen des Standes-der-Technik andernfalls nur schwer zu erreichen ist. Ungeachtet des Expansionsgrades konnten nur geringe Änderungen der Kristallinität festgestellt werden, wohingegen die Kristallgröße mit zunehmender Expansion abnahm. Diesbezüglich wird angenommen dass der Elastizitätsmodulus nur geringfügigen Veränderungen unterliegt oder sogar aufgrund einer Kettenversteifung tendenziell zunimmt. Zusätzlich der Betrachtung einer Volumenzunahme, konnte durch die Änderung des Druckgradienten ebenfalls ein Schrumpfen der Kapseln erreicht werden. Die Reversibilität dieses Prozesses wurde in Expansions/Deflations-Zyklen bestätigt und ist eine wichtige Eigenschaft der Mikroballons hinsichtlich ihrer Verwendung als Mikropumpe und Mikroventil. Die Fixierung expandierter Mikrokapseln durch Rekristallisierung der Membran ermöglichte weiterhin eine Pumpfunktion in nicht-wässrigen Medien. Dabei konnte festgestellt werden, dass die Pumpleistung sowohl von dem umgebenden Medium als auch von der applizierten Temperatur abhingen. Medien, die einen schnellen Abtransport der freigesetzten Flüssigkeit ermöglichten, als auch hohe Temperaturen steigerten hierbei die Pumpleistung. Mikroballons mit einer sehr großen Auswurfleistung konnten durch das Einbringen einer Öffnung in die Membran erzeugt werden. Die Fixierung intermediärer Kapselgrößen ermöglichte Ventilkonstruktionen, welche eine präzise Flussrateneinstellung und ein vielfaches öffnen und Schließen des Ventils ermöglichte. Diese Konstruktionen wurden durch das Einbringen eines oder mehrerer Mikroballons realisiert. Ein teilweises und vollkommenes Schließen dieser Mikroballon-basierten Ventilen wurde mit einem periodischen Versuchsaufbau in Abhängigkeit der Heizperiode gezeigt. Dabei wurden unterschiedliche Expansions- und Deflationskinetiken mit einem schnelleren Schrumpfverhalten bestätigt. Zusammenfassend wurden Mikroballons entwickelt, welche sowohl eine "on-demand" Pumpfunktion als auch eine reversible Ventilfunktion aufweisen. Die Implementierung des Schaltmotives in die Partikelmembran sowie die kontrollierbaren Expansions/Deflationskinetiken machen die Mikroballons gegebenenfalls zu geeigneten Komponenten für hochintegrierbare LOC-Systeme. Im Vergleich zu anderen Stimuli-sensitiven Materialien ist die Möglichkeit der nahezu kontinuierlichen Stabilisierung von intermediärer Partikelgrößen hervorzuheben. Dieses Verhalten wird dabei durch Wechselspiel zwischen Materialeigenschaften und Kapselgeometrie erzeugt. KW - microcapsules KW - expansion KW - stimuli-sensitivity KW - microfluidics KW - polymer network KW - Mikrokapseln KW - expandierbar KW - Stimuli-Sensitivität KW - Mikrofluidik KW - Polymernetzwerk Y1 - 2023 ER - TY - JOUR A1 - Dragičević, Nikolina A1 - Vladova, Gergana A1 - Ullrich, André T1 - Design thinking capabilities in the digital world BT - A bibliometric analysis of emerging trends JF - Frontiers in Education N2 - Recent research suggests that design thinking practices may foster the development of needed capabilities in new digitalised landscapes. However, existing publications represent individual contributions, and we lack a holistic understanding of the value of design thinking in a digital world. No review, to date, has offered a holistic retrospection of this research. In response, in this bibliometric review, we aim to shed light on the intellectual structure of multidisciplinary design thinking literature related to capabilities relevant to the digital world in higher education and business settings, highlight current trends and suggest further studies to advance theoretical and empirical underpinnings. Our study addresses this aim using bibliometric methods—bibliographic coupling and co-word analysis as they are particularly suitable for identifying current trends and future research priorities at the forefront of the research. Overall, bibliometric analyses of the publications dealing with the related topics published in the last 10 years (extracted from the Web of Science database) expose six trends and two possible future research developments highlighting the expanding scope of the design thinking scientific field related to capabilities required for the (more sustainable and human-centric) digital world. Relatedly, design thinking becomes a relevant approach to be included in higher education curricula and human resources training to prepare students and workers for the changing work demands. This paper is well-suited for education and business practitioners seeking to embed design thinking capabilities in their curricula and for design thinking and other scholars wanting to understand the field and possible directions for future research. KW - design thinking KW - digital technologies KW - digital transformation KW - capabilities KW - skills Y1 - 2023 U6 - https://doi.org/10.3389/feduc.2022.1012478 SN - 2504-284X VL - 7 PB - Frontiers CY - Lausanne, Schweiz ER - TY - JOUR A1 - Hermanussen, Michael A1 - Scheffler, Christiane A1 - Pulungan, Aman B. A1 - Bandyopadhyay, Arup Ratan A1 - Ghosh, Jyoti Ratan A1 - Özdemir, Ayşegül A1 - Koca Özer, Başak A1 - Musalek, Martin A1 - Lebedeva, Lidia A1 - Godina, Elena A1 - Bogin, Barry A1 - Tutkuviene, Janina A1 - Budrytė, Milda A1 - Gervickaite, Simona A1 - Limony, Yehuda A1 - Kirchengast, Sylvia A1 - Buston, Peter A1 - Groth, Detlef A1 - Rösler, Antonia A1 - Gasparatos, Nikolaos A1 - Erofeev, Sergei A1 - Novine, Masiar A1 - Navazo, Bárbara A1 - Dahinten, Silvia A1 - Gomuła, Aleksandra A1 - Nowak-Szczepańska, Natalia A1 - Kozieł, Sławomir T1 - Environment, social behavior, and growth BT - Proceedings of the 30th Aschauer Soiree, held at Krobielowice, Poland, June 18th 2022 JF - Human biology and public health N2 - Twenty-four scientists met for the annual Auxological conference held at Krobielowice castle, Poland, to discuss the diverse influences of the environment and of social behavior on growth following last year’s focus on growth and public health concerns (Hermanussen et al., 2022b). Growth and final body size exhibit marked plastic responses to ecological conditions. Among the shortest are the pygmoid people of Rampasasa, Flores, Indonesia, who still live under most secluded insular conditions. Genetics and nutrition are usually considered responsible for the poor growth in many parts of this world, but evidence is accumulating on the prominent impact of social embedding on child growth. Secular trends not only in the growth of height, but also in body proportions, accompany the secular changes in the social, economic and political conditions, with major influences on the emotional and educational circumstances under which the children grow up (Bogin, 2021). Aspects of developmental tempo and aspects of sports were discussed, and the impact of migration by the example of women from Bangladesh who grew up in the UK. Child growth was considered in particular from the point of view of strategic adjustments of individual size within the network of its social group. Theoretical considerations on network characteristics were presented and related to the evolutionary conservation of growth regulating hypothalamic neuropeptides that have been shown to link behavior and physical growth in the vertebrate species. New statistical approaches were presented for the evaluation of short term growth measurements that permit monitoring child growth at intervals of a few days and weeks. KW - St. Nicolas House Analysis KW - child growth KW - body proportions KW - social network KW - public health KW - migration Y1 - 2023 U6 - https://doi.org/10.52905/hbph2023.1.59 SN - 2748-9957 VL - 1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Gasparatos, Nikolaos A1 - Scheffler, Christiane A1 - Hermanussen, Michael T1 - Assessing the applicability of changepoint analysis to analyse short-term growth JF - Human biology and public health N2 - Background: Assessing short-term growth in humans is still fraught with difficulties. Especially when looking for small variations and increments, such as mini growth spurts, high precision instruments or frequent measurements are necessary. Daily measurements however require a lot of effort, both for anthropologists and for the subjects. Therefore, new sophisticated approaches are needed that reduce fluctuations and reveal underlying patterns. Objectives: Changepoints are abrupt variations in the properties of time series data. In the context of growth, such variations could be variation in mean height. By adjusting the variance and using different growth models, we assessed the ability of changepoint analysis to analyse short-term growth and detect mini growth spurts. Sample and Methods: We performed Bayesian changepoint analysis on simulated growth data using the bcp package in R. Simulated growth patterns included stasis, linear growth, catch-up growth, and mini growth spurts. Specificity and a normalised variant of the Matthews correlation coefficient (MCC) were used to assess the algorithm’s performance. Welch’s t-test was used to compare differences of the mean. Results: First results show that changepoint analysis can detect mini growth spurts. However, the ability to detect mini growth spurts is highly dependent on measurement error. Data preparation, such as ranking and rotating time series data, showed negligible improvements. Missing data was an issue and may affect the prediction quality of the classification metrics. Conclusion: Changepoint analysis is a promising tool to analyse short-term growth. However, further optimisation and analysis of real growth data is needed to make broader generalisations. KW - changepoint analysis KW - changepoint detection KW - performance evaluation KW - mini growth spurt KW - short-term growth Y1 - 2023 U6 - https://doi.org/10.52905/hbph2023.1.62 SN - 2748-9957 VL - 1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Groth, Detlef A1 - Scheffler, Christiane A1 - Hermanussen, Michael T1 - Human growth data analysis and statistics – the 5th Gülpe International Student Summer School JF - Human biology and public health N2 - The Summer School in Gülpe (Ecological Station of the University of Potsdam) offers an exceptional learning opportunity for students to apply their knowledge and skills to real-world problems. With the guidance of experienced human biologists, statisticians, and programmers, students have the unique chance to analyze their own data and gain valuable insights. This interdisciplinary setting not only bridges different research areas but also leads to highly valuable outputs. The progress of students within just a few days is truly remarkable, especially when they are motivated and receive immediate feedback on their questions, problems, and results. The Summer School covers a wide range of topics, with this year’s focus mainly on two areas: understanding the impact of socioeconomic and physiological factors on human development and mastering statistical techniques for analyzing data such as changepoint analysis and the St. Nicolas House Analysis (SNHA) to visualize interacting variables. The latter technique, born out of the Summer School’s emphasis on gaining comprehensive data insights and understanding major relationships, has proven to be a valuable tool for researchers in the field. The articles in this special issue demonstrate that the Summer School in Gülpe stands as a testament to the power of practical learning and collaboration. Students who attend not only gain hands-on experience but also benefit from the expertise of professionals and the opportunity to engage with peers from diverse disciplines. KW - Summer Schools KW - Statistical Exercise KW - Repetition Y1 - 2023 U6 - https://doi.org/10.52905/hbph2023.1.70 SN - 2748-9957 VL - 1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Rösler, Antonia A1 - Scheffler, Christiane A1 - Hermanussen, Michael T1 - No evidence of growth impairment after forced migration in Polish school children after World War II JF - Human biology and public health N2 - Background: Migration is omnipresent. It can come hand in hand with emotional stress which is known to influence the growth of children. Objective: The aim of this study was to analyse whether type of migration (forced or voluntary) and the geographic direction had influenced the growth of Polish children after World War II. Sample and Methods: A sub dataset of 2,208 individuals between the ages of 2-20, created from data of the 2nd Polish Anthropological Survey carried out in 1966–1969, including anthropometrical data and social and demographic information based on questionnaire, was used to analyse migration effects. Results: No association could be found between the direction of migration and the height of the children. The confidence intervals of the means of all classified migration categories overlap significantly and the effect size of the influence of migration category on height is ds=.140, which is too low to see any effects, even if there were one. Conclusion: Neither forced nor voluntary migration in Poland after World War II led to a change in height in children of migrating families. KW - nutrition KW - stunting KW - socioeconomy KW - education KW - secular changes KW - pubertal timing Y1 - 2023 U6 - https://doi.org/10.52905/hbph2023.1.68 SN - 2748-9957 VL - 1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Hermanussen, Michael A1 - Scheffler, Christiane T1 - Nutrition, size, and tempo JF - Human biology and public health N2 - Nutrition is a prerequisite, but not a regulator of growth. Growth is defined as increase in size over time. The understanding of growth includes an understanding of the binary concept of physical time and individual tempo. Excess food causes tempo acceleration. Food restriction delays tempo. Tempo reflects the pace of life. It is a dynamic physical response to a broad spectrum of social, economic, political, and emotional (SEPE) factors and can affect life expectancy. Variations in tempo create distortions of the z-score patterns of height and weight. Illness or intermediate food shortage lead to intermediate halts in development and create short dips in the z-score patterns. Children who develop throughout life at delayed pace usually run at lower z-scores for height and weight, and show a characteristic adolescent trough; children who develop throughout life at faster than average pace usually run at higher z-scores and show a characteristic adolescent peak in their z-score patterns. During adolescence, almost half of the height variance is due to tempo variation. There is not one tempo for the whole body. Different organ systems grow and mature at different pace. KW - food access KW - physical time KW - SEPS factors KW - pace of life KW - catch-up-growth Y1 - 2023 U6 - https://doi.org/10.52905/hbph2022.3.37 SN - 2748-9957 VL - 2022 IS - 3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Scheffler, Christiane A1 - Hermanussen, Michael T1 - What does stunting tell us? JF - Human biology and public health N2 - Stunting is commonly linked with undernutrition. Yet, already after World War I, German pediatricians questioned this link and stated that no association exists between nutrition and height. Recent analyses within different populations of Low- and middle-income countries with high rates of stunted children failed to support the assumption that stunted children have a low BMI and skinfold sickness as signs of severe caloric deficiency. So, stunting is not a synonym of malnutrition. Parental education level has a positive influence on body height in stunted populations, e.g., in India and in Indonesia. Socially disadvantaged children tend to be shorter and lighter than children from affluent families. Humans are social mammals; they regulate growth similar to other social mammals. Also in humans, body height is strongly associated with the position within the social hierarchy, reflecting the personal and group-specific social, economic, political, and emotional environment. These non-nutritional impact factors on growth are summarized by the concept of SEPE (Social-Economic-Political-Emotional) factors. SEPE reflects on prestige, dominance-subordination, social identity, and ego motivation of individuals and social groups. KW - SEPE Factors KW - physical fitness KW - height in history KW - malnutrition Y1 - 2023 U6 - https://doi.org/10.52905/hbph2022.3.36 SN - 2748-9957 VL - 2022 IS - 3 SP - 1 EP - 15 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Stone, Kate A1 - Nicenboim, Bruno A1 - Vasishth, Shravan A1 - Rösler, Frank T1 - Understanding the effects of constraint and predictability in ERP JF - Neurobiology of language N2 - Intuitively, strongly constraining contexts should lead to stronger probabilistic representations of sentences in memory. Encountering unexpected words could therefore be expected to trigger costlier shifts in these representations than expected words. However, psycholinguistic measures commonly used to study probabilistic processing, such as the N400 event-related potential (ERP) component, are sensitive to word predictability but not to contextual constraint. Some research suggests that constraint-related processing cost may be measurable via an ERP positivity following the N400, known as the anterior post-N400 positivity (PNP). The PNP is argued to reflect update of a sentence representation and to be distinct from the posterior P600, which reflects conflict detection and reanalysis. However, constraint-related PNP findings are inconsistent. We sought to conceptually replicate Federmeier et al. (2007) and Kuperberg et al. (2020), who observed that the PNP, but not the N400 or the P600, was affected by constraint at unexpected but plausible words. Using a pre-registered design and statistical approach maximising power, we demonstrated a dissociated effect of predictability and constraint: strong evidence for predictability but not constraint in the N400 window, and strong evidence for constraint but not predictability in the later window. However, the constraint effect was consistent with a P600 and not a PNP, suggesting increased conflict between a strong representation and unexpected input rather than greater update of the representation. We conclude that either a simple strong/weak constraint design is not always sufficient to elicit the PNP, or that previous PNP constraint findings could be an artifact of smaller sample size. KW - N400 KW - anterior PNP KW - posterior P600 KW - probabilistic processing KW - constraint KW - predictability KW - entropy Y1 - 2022 U6 - https://doi.org/10.1162/nol_a_00094 SN - 2641-4368 VL - 4 IS - 2 SP - 221 EP - 256 PB - MIT Press CY - Cambridge, MA, USA ER - TY - JOUR A1 - Quarmby, Andrew James A1 - Mönnig, Jamal A1 - Mugele, Hendrik A1 - Henschke, Jakob A1 - Kim, MyoungHwee A1 - Cassel, Michael A1 - Engel, Tilman T1 - Biomechanics and lower limb function are altered in athletes and runners with achilles tendinopathy compared with healthy controls: A systematic review JF - Frontiers in Sports and Active Living N2 - Achilles tendinopathy (AT) is a debilitating injury in athletes, especially for those engaged in repetitive stretch-shortening cycle activities. Clinical risk factors are numerous, but it has been suggested that altered biomechanics might be associated with AT. No systematic review has been conducted investigating these biomechanical alterations in specifically athletic populations. Therefore, the aim of this systematic review was to compare the lower-limb biomechanics of athletes with AT to athletically matched asymptomatic controls. Databases were searched for relevant studies investigating biomechanics during gait activities and other motor tasks such as hopping, isolated strength tasks, and reflex responses. Inclusion criteria for studies were an AT diagnosis in at least one group, cross-sectional or prospective data, at least one outcome comparing biomechanical data between an AT and healthy group, and athletic populations. Studies were excluded if patients had Achilles tendon rupture/surgery, participants reported injuries other than AT, and when only within-subject data was available.. Effect sizes (Cohen's d) with 95% confidence intervals were calculated for relevant outcomes. The initial search yielded 4,442 studies. After screening, twenty studies (775 total participants) were synthesised, reporting on a wide range of biomechanical outcomes. Females were under-represented and patients in the AT group were three years older on average. Biomechanical alterations were identified in some studies during running, hopping, jumping, strength tasks and reflex activity. Equally, several biomechanical variables studied were not associated with AT in included studies, indicating a conflicting picture. Kinematics in AT patients appeared to be altered in the lower limb, potentially indicating a pattern of “medial collapse”. Muscular activity of the calf and hips was different between groups, whereby AT patients exhibited greater calf electromyographic amplitudes despite lower plantar flexor strength. Overall, dynamic maximal strength of the plantar flexors, and isometric strength of the hips might be reduced in the AT group. This systematic review reports on several biomechanical alterations in athletes with AT. With further research, these factors could potentially form treatment targets for clinicians, although clinical approaches should take other contributing health factors into account. The studies included were of low quality, and currently no solid conclusions can be drawn. KW - achilles tendinopathy KW - biomechanics KW - neuromuscular KW - kinetics KW - electromyography KW - athletes KW - runners KW - kinematics Y1 - 2023 U6 - https://doi.org/10.3389/fspor.2022.1012471 SN - 2624-9367 PB - Frontiers CY - Lausanne, Schweiz ER - TY - JOUR A1 - Heissel, Andreas A1 - Pietrek, Anou F. A1 - Kangas, Maria A1 - Van der Kaap-Deeder, Jolene A1 - Rapp, Michael Armin T1 - The Mediating Role of Rumination in the Relation between Basic Psychological Need Frustration and Depressive Symptoms JF - Journal of Clinical Medicine N2 - Research within the framework of Basic Psychological Need Theory (BPNT) finds strong associations between basic need frustration and depressive symptoms. This study examined the role of rumination as an underlying mechanism in the association between basic psychological need frustration and depressive symptoms. A cross-sectional sample of N = 221 adults (55.2% female, mean age = 27.95, range = 18–62, SD = 10.51) completed measures assessing their level of basic psychological need frustration, rumination, and depressive symptoms. Correlational analyses and multiple mediation models were conducted. Brooding partially mediated the relation between need frustration and depressive symptoms. BPNT and Response Styles Theory are compatible and can further advance knowledge about depression vulnerabilities. KW - psychopathology KW - elf-determination theory KW - response styles theory KW - frustration KW - depressive disorder KW - emotional regulation KW - rumination Y1 - 2023 U6 - https://doi.org/10.3390/jcm12020395 SN - 2077-0383 VL - 12 SP - 1 EP - 10 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - JOUR A1 - Tofelde, Stefanie A1 - Bufe, Aaron A1 - Turowski, Jens M. T1 - Hillslope Sediment Supply Limits Alluvial Valley Width JF - AGU Advances N2 - River-valley morphology preserves information on tectonic and climatic conditions that shape landscapes. Observations suggest that river discharge and valley-wall lithology are the main controls on valley width. Yet, current models based on these observations fail to explain the full range of cross-sectional valley shapes in nature, suggesting hitherto unquantified controls on valley width. In particular, current models cannot explain the existence of paired terrace sequences that form under cyclic climate forcing. Paired river terraces are staircases of abandoned floodplains on both valley sides, and hence preserve past valley widths. Their formation requires alternating phases of predominantly river incision and predominantly lateral planation, plus progressive valley narrowing. While cyclic Quaternary climate changes can explain shifts between incision and lateral erosion, the driving mechanism of valley narrowing is unknown. Here, we extract valley geometries from climatically formed, alluvial river-terrace sequences and show that across our dataset, the total cumulative terrace height (here: total valley height) explains 90%–99% of the variance in valley width at the terrace sites. This finding suggests that valley height, or a parameter that scales linearly with valley height, controls valley width in addition to river discharge and lithology. To explain this valley-width-height relationship, we reformulate existing valley-width models and suggest that, when adjusting to new boundary conditions, alluvial valleys evolve to a width at which sediment removal from valley walls matches lateral sediment supply from hillslope erosion. Such a hillslope-channel coupling is not captured in current valley-evolution models. Our model can explain the existence of paired terrace sequences under cyclic climate forcing and relates valley width to measurable field parameters. Therefore, it facilitates the reconstruction of past climatic and tectonic conditions from valley topography. Y1 - 2022 U6 - https://doi.org/10.1029/2021AV000641 SN - 2576-604X PB - American Geophysical Union (AGU); Wiley CY - Hoboken, New Jersey, USA ER - TY - JOUR A1 - Miklashevsky, Alex A1 - Fischer, Martin H. A1 - Lindemann, Oliver T1 - Spatial-numerical associations without a motor response? Grip force says ‘Yes’ JF - Acta Psychologica N2 - In numerical processing, the functional role of Spatial-Numerical Associations (SNAs, such as the association of smaller numbers with left space and larger numbers with right space, the Mental Number Line hypothesis) is debated. Most studies demonstrate SNAs with lateralized responses, and there is little evidence that SNAs appear when no response is required. We recorded passive holding grip forces in no-go trials during number processing. In Experiment 1, participants performed a surface numerical decision task (“Is it a number or a letter?”). In Experiment 2, we used a deeper semantic task (“Is this number larger or smaller than five?”). Despite instruction to keep their grip force constant, participants' spontaneous grip force changed in both experiments: Smaller numbers led to larger force increase in the left than in the right hand in the numerical decision task (500–700 ms after stimulus onset). In the semantic task, smaller numbers again led to larger force increase in the left hand, and larger numbers increased the right-hand holding force. This effect appeared earlier (180 ms) and lasted longer (until 580 ms after stimulus onset). This is the first demonstration of SNAs with passive holding force. Our result suggests that (1) explicit motor response is not a prerequisite for SNAs to appear, and (2) the timing and strength of SNAs are task-dependent. (216 words). KW - SNARC KW - Mental number line KW - Number processing KW - Embodied cognition KW - Grip force KW - Motor system Y1 - 2022 U6 - https://doi.org/10.1016/j.actpsy.2022.103791 SN - 1873-6297 VL - 231 SP - 1 EP - 17 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Lindner, Nadja A1 - Moeller, Korbinian A1 - Hildebrandt, Frauke A1 - Hasselhorn, Marcus A1 - Lonnemann, Jan T1 - Children's use of egocentric reference frames in spatial language is related to their numerical magnitude understanding JF - Frontiers in Psychology N2 - Numerical magnitude information is assumed to be spatially represented in the form of a mental number line defined with respect to a body-centred, egocentric frame of reference. In this context, spatial language skills such as mastery of verbal descriptions of spatial position (e.g., in front of, behind, to the right/left) have been proposed to be relevant for grasping spatial relations between numerical magnitudes on the mental number line. We examined 4- to 5-year-old’s spatial language skills in tasks that allow responses in egocentric and allocentric frames of reference, as well as their relative understanding of numerical magnitude (assessed by a number word comparison task). In addition, we evaluated influences of children’s absolute understanding of numerical magnitude assessed by their number word comprehension (montring different numbers using their fingers) and of their knowledge on numerical sequences (determining predecessors and successors as well as identifying missing dice patterns of a series). Results indicated that when considering responses that corresponded to the egocentric perspective, children’s spatial language was associated significantly with their relative numerical magnitude understanding, even after controlling for covariates, such as children’s SES, mental rotation skills, and also absolute magnitude understanding or knowledge on numerical sequences. This suggests that the use of egocentric reference frames in spatial language may facilitate spatial representation of numbers along a mental number line and thus seem important for preschoolers’ relative understanding of numerical magnitude. KW - spatial language KW - frames of reference KW - numerical development KW - mental number line KW - preschool children Y1 - 2022 U6 - https://doi.org/10.3389/fpsyg.2022.943191 SN - 1664-1078 SP - 1 EP - 13 PB - Frontiers CY - Lausanne, Schweiz ER - TY - JOUR A1 - Reeg, Jette A1 - Strigl, Lea A1 - Jeltsch, Florian T1 - Agricultural buffer zone thresholds to safeguard functional bee diversity BT - Insights from a community modeling approach JF - Ecology and Evolution N2 - Wild bee species are important pollinators in agricultural landscapes. However, population decline was reported over the last decades and is still ongoing. While agricultural intensification is a major driver of the rapid loss of pollinating species, transition zones between arable fields and forest or grassland patches, i.e., agricultural buffer zones, are frequently mentioned as suitable mitigation measures to support wild bee populations and other pollinator species. Despite the reported general positive effect, it remains unclear which amount of buffer zones is needed to ensure a sustainable and permanent impact for enhancing bee diversity and abundance. To address this question at a pollinator community level, we implemented a process-based, spatially explicit simulation model of functional bee diversity dynamics in an agricultural landscape. More specifically, we introduced a variable amount of agricultural buffer zones (ABZs) at the transition of arable to grassland, or arable to forest patches to analyze the impact on bee functional diversity and functional richness. We focused our study on solitary bees in a typical agricultural area in the Northeast of Germany. Our results showed positive effects with at least 25% of virtually implemented agricultural buffer zones. However, higher amounts of ABZs of at least 75% should be considered to ensure a sufficient increase in Shannon diversity and decrease in quasi-extinction risks. These high amounts of ABZs represent effective conservation measures to safeguard the stability of pollination services provided by solitary bee species. As the model structure can be easily adapted to other mobile species in agricultural landscapes, our community approach offers the chance to compare the effectiveness of conservation measures also for other pollinator communities in future. KW - agricultural landscape KW - buffer zones KW - community model KW - functional traits KW - solitary bees KW - spatially explicit Y1 - 2022 U6 - https://doi.org/10.1002/ece3.8748 SN - 2045-7758 VL - 12 SP - 1 EP - 17 PB - Wiley Online Library CY - Hoboken, New Jersey, USA ET - 3 ER -