TY - THES A1 - Adelhelm, Philipp T1 - Novel carbon materials with hierarchical porosity : templating strategies and advanced characterization T1 - Neue Kohlenstoffmaterialien mit hierarchischer Porosität : Strategien der Templatierung und erweiterte Charakterisierung N2 - The aim of this work was the generation of carbon materials with high surface area, exhibiting a hierarchical pore system in the macro- and mesorange. Such a pore system facilitates the transport through the material and enhances the interaction with the carbon matrix (macropores are pores with diameters > 50 nm, mesopores between 2 – 50 nm). Thereto, new strategies for the synthesis of novel carbon materials with designed porosity were developed that are in particular useful for the storage of energy. Besides the porosity, it is the graphene structure itself that determines the properties of a carbon material. Non-graphitic carbon materials usually exhibit a quite large degree of disorder with many defects in the graphene structure, and thus exhibit inherent microporosity (d < 2nm). These pores are traps and oppose reversible interaction with the carbon matrix. Furthermore they reduce the stability and conductivity of the carbon material, which was undesired for the proposed applications. As one part of this work, the graphene structures of different non-graphitic carbon materials were studied in detail using a novel wide-angle x-ray scattering model that allowed precise information about the nature of the carbon building units (graphene stacks). Different carbon precursors were evaluated regarding their potential use for the synthesis shown in this work, whereas mesophase pitch proved to be advantageous when a less disordered carbon microstructure is desired. By using mesophase pitch as carbon precursor, two templating strategies were developed using the nanocasting approach. The synthesized (monolithic) materials combined for the first time the advantages of a hierarchical interconnected pore system in the macro- and mesorange with the advantages of mesophase pitch as carbon precursor. In the first case, hierarchical macro- / mesoporous carbon monoliths were synthesized by replication of hard (silica) templates. Thus, a suitable synthesis procedure was developed that allowed the infiltration of the template with the hardly soluble carbon precursor. In the second case, hierarchical macro- / mesoporous carbon materials were synthesized by a novel soft-templating technique, taking advantage of the phase separation (spinodal decomposition) between mesophase pitch and polystyrene. The synthesis also allowed the generation of monolithic samples and incorporation of functional nanoparticles into the material. The synthesized materials showed excellent properties as an anode material in lithium batteries and support material for supercapacitors. N2 - Kohlenstoffmaterialien finden aufgrund ihrer Vielseitigkeit heute in den unterschiedlichsten Bereichen des täglichen Lebens ihren Einsatz. Bekannte Beispiele sind Kohlenstofffasern in Verbundwerkstoffen, Graphit als trockenes Schmiermittel, oder Aktivkohlen in Filtersystemen. Ferner wird Graphit als Elektrodenmaterial auch in Lithium-Ionen-Batterien verwendet. Wegen knapper werdender Ressourcen von Öl und Gas wurde in den letzten Jahren verstärkt an der Entwicklung neuer Materialien für die Speicherung von Wasserstoff und elektrischer Energie gearbeitet. Die Nanotechnologie ist dabei auch für neue Kohlenstoffmaterialien zukunftsweisend, denn sie stellt weitere Anwendungsmöglichkeiten in Aussicht. In dieser Arbeit wurden hierzu mittels des sogenannten Nanocastings neue Kohlenstoffmaterialien für Energieanwendungen, insbesondere zur Speicherung von elektrischer Energie entwickelt. Die Eigenschaften eines Kohlenstoffmaterials beruhen im Wesentlichen auf der Struktur des Kohlenstoffs im molekularen Bereich. Die in dieser Arbeit hergestellten Materialen bestehen aus nichtgraphitischem Kohlenstoff und wurden im ersten Teil der Arbeit mit den Methoden der Röntgenstreuung genau untersucht. Eine speziell für diese Art von Kohlenstoffen kürzlich entwickelte Modellfunktion wurde dazu an die experimentellen Streubilder angepasst. Das verwendete Modell basiert dabei auf den wesentlichen Strukturmerkmalen von nichtgraphitischem Kohlenstoff und ermöglichte von daher eine detaillierte Beschreibung der Materialien. Im Gegensatz zu den meisten nichtgraphitischen Kohlenstoffen konnte gezeigt werden, dass die Verwendung von Mesophasen-Pech als Vorläufersubstanz (Precursor) ein Material mit vergleichsweise geringem Grad an Unordnung ermöglicht. Solch ein Material erlaubt eine ähnlich reversible Einlagerung von Lithium-Ionen wie Graphit, weist aber gleichzeitig wegen des nichtgraphitischen Charakters eine deutlich höhere Speicherfähigkeit auf. Zur Beschreibung der Porosität eines Materials verwendet man die Begriffe der Makro-, Meso-, und Mikroporen. Die Aktivität eines Materials kann durch die Erhöhung der Oberfläche noch erheblich gesteigert werden. Hohe Oberflächen können insbesondere durch die Schaffung von Poren im Nanometerbereich erzielt werden. Um die Zugänglichkeit zu diesen Poren zu steigern, weist ein Material idealerweise zusätzlich ein kontinuierliches makroporöses Transportsystem (Porendurchmesser d > 50 nm) auf. Solch eine Art von Porosität über mehrere Größenordnungen wird allgemein als „hierarchische Porosität“ bezeichnet. Für elektrochemische Anwendungen sind sogenannte Mesoporen (d = 2 – 50 nm) relevant, da noch kleinere Poren (Mikroporen, d < 2 nm) z.B. zu einer irreversiblen Bindung von Lithium- Ionen führen können. Wird Mesophasen-Pech als Kohlenstoffprekursor verwendet, kann die Entstehung dieser Mikroporen verhindert werden. Im zweiten und dritten Teil der Arbeit konnte mit den Methoden des „Nanocastings“ zum ersten Mal die spezielle Struktur des Mesophasen-Pech basierenden Kohlenstoffmaterials mit den Vorteilen einer hierarchischen (makro- / meso-) Porosität kombiniert werden. Im ersten Syntheseverfahren wurde dazu ein sogenanntes „hartes Templat“ mit entsprechender Porosität aus Siliziumdioxid repliziert. Aufgrund der hohen Viskosität des Pechs und der geringen Löslichkeit wurde dazu ein Verfahren entwickelt, das die Infiltration des Templates auch auf der Nanometerebene ermöglicht. Das Material konnte in Form größerer Körper (Monolithen) hergestellt werden, die im Vergleich zu Pulvern eine bessere technische Verwendung ermöglichen. Im zweiten Syntheseverfahren konnte die Herstellung eines hierarchisch makro- / mesoporösen Kohlenstoffmaterials erstmals mittels eines weichen Templates (organisches Polymer) erreicht werden. Die einfache Entfernung von weichen Templaten durch eine geeignete Temperaturbehandlung, macht dieses Verfahren im Vergleich zu hart templatierten Materialien kostengünstiger und stellt eine technische Umsetzung in Aussicht. Desweiteren erlaubt das Syntheseverfahren die Herstellung von monolithischen Körpern und die Einbindung funktionaler Nanopartikel. Die hergestellten Materialien zeigen exzellente Eigenschaften als Elektrodenmaterial in Lithium-Ionen-Batterien und als Trägermaterial für Superkondensatoren. KW - Mesoporosität KW - hierarchische Porosität KW - weiche und harte Templatierung KW - Kohlenstoffmaterialien KW - Weitwinkelröntgenstreuung KW - Mesoporosity KW - hierarchical porosity KW - soft and hard templating KW - carbon materials KW - wide-angle x-ray scattering Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15053 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Bajerski, Felizitas T1 - Bacterial communities in glacier forefields of the Larsemann Hills, East Antarctica : structure, development & adaptation T1 - Bakterielle Gemeinschaften in Gletschervorfeldern der Larsemann Berge der Ostantarktis : Struktur, Entwicklung & Anpassung N2 - Antarctic glacier forfields are extreme environments and pioneer sites for ecological succession. The Antarctic continent shows microbial community development as a natural laboratory because of its special environment, geographic isolation and little anthropogenic influence. Increasing temperatures due to global warming lead to enhanced deglaciation processes in cold-affected habitats and new terrain is becoming exposed to soil formation and accessible for microbial colonisation. This study aims to understand the structure and development of glacier forefield bacterial communities, especially how soil parameters impact the microorganisms and how those are adapted to the extreme conditions of the habitat. To this effect, a combination of cultivation experiments, molecular, geophysical and geochemical analysis was applied to examine two glacier forfields of the Larsemann Hills, East Antarctica. Culture-independent molecular tools such as terminal restriction length polymorphism (T-RFLP), clone libraries and quantitative real-time PCR (qPCR) were used to determine bacterial diversity and distribution. Cultivation of yet unknown species was carried out to get insights in the physiology and adaptation of the microorganisms. Adaptation strategies of the microorganisms were studied by determining changes of the cell membrane phospholipid fatty acid (PLFA) inventory of an isolated bacterium in response to temperature and pH fluctuations and by measuring enzyme activity at low temperature in environmental soil samples. The two studied glacier forefields are extreme habitats characterised by low temperatures, low water availability and small oligotrophic nutrient pools and represent sites of different bacterial succession in relation to soil parameters. The investigated sites showed microbial succession at an early step of soil formation near the ice tongue in comparison to closely located but rather older and more developed soil from the forefield. At the early step the succession is influenced by a deglaciation-dependent areal shift of soil parameters followed by a variable and prevalently depth-related distribution of the soil parameters that is driven by the extreme Antarctic conditions. The dominant taxa in the glacier forefields are Actinobacteria, Acidobacteria, Proteobacteria, Bacteroidetes, Cyanobacteria and Chloroflexi. The connection of soil characteristics with bacterial community structure showed that soil parameter and soil formation along the glacier forefield influence the distribution of certain phyla. In the early step of succession the relative undifferentiated bacterial diversity reflects the undifferentiated soil development and has a high potential to shift according to past and present environmental conditions. With progressing development environmental constraints such as water or carbon limitation have a greater influence. Adapting the culturing conditions to the cold and oligotrophic environment, the number of culturable heterotrophic bacteria reached up to 108 colony forming units per gram soil and 148 isolates were obtained. Two new psychrotolerant bacteria, Herbaspirillum psychrotolerans PB1T and Chryseobacterium frigidisoli PB4T, were characterised in detail and described as novel species in the family of Oxalobacteraceae and Flavobacteriaceae, respectively. The isolates are able to grow at low temperatures tolerating temperature fluctuations and they are not specialised to a certain substrate, therefore they are well-adapted to the cold and oligotrophic environment. The adaptation strategies of the microorganisms were analysed in environmental samples and cultures focussing on extracellular enzyme activity at low temperature and PLFA analyses. Extracellular phosphatases (pH 11 and pH 6.5), β-glucosidase, invertase and urease activity were detected in the glacier forefield soils at low temperature (14°C) catalysing the conversion of various compounds providing necessary substrates and may further play a role in the soil formation and total carbon turnover of the habitat. The PLFA analysis of the newly isolated species C. frigidisoli showed that the cold-adapted strain develops different strategies to maintain the cell membrane function under changing environmental conditions by altering the PLFA inventory at different temperatures and pH values. A newly discovered fatty acid, which was not found in any other microorganism so far, significantly increased at decreasing temperature and low pH and thus plays an important role in the adaption of C. frigidisoli. This work gives insights into the diversity, distribution and adaptation mechanisms of microbial communities in oligotrophic cold-affected soils and shows that Antarctic glacier forefields are suitable model systems to study bacterial colonisation in connection to soil formation. N2 - Gletschervorfelder der Antarktis stellen extreme Habitate dar und sind Pionierstandorte biologischer Sukzession. Insbesondere unter Berücksichtigung zuletzt beobachteter und vorausgesagter Erwärmungstrends in der Antarktis und der Relevanz der Mikroorganismen für das Antarktische Ökosystem, ist es essentiell mehr Informationen über die Entwicklung frisch exponierter Gletschervorfelder zu erlangen. Ziel dieser Studie ist es, die Struktur und Entwicklung bakterieller Gletschervorfeldgemeinschaften zu verstehen, insbesondere wie die Mikroorganismen von den Bodenparametern beeinflusst werden und wie diese sich an die extremen Bedingungen des Habitats anpassen. Für die Untersuchung der Proben von zwei Gletschervorfeldern aus den Larsemann Bergen der Ostantarktis diente eine Kombination aus Kultivierungsexperimenten und molekularen, geophysikalischen und geochemischen Analysen. Die untersuchten Gletschervorfelder sind durch extrem niedrige Temperaturen, einer geringen biologischen Wasserverfügbarkeit und oligotrophe Nährstoffgehalte charakterisiert und zeigen unterschiedliche Entwicklungsstufen in Verbindung zu den Bodenparametern. In einem frühen Schritt der Bodenbildung in der Nähe der Gletscherzunge sind die Gemeinschaften undifferenziert, doch mit fortschreitender Entwicklung nimmt de Einfluss von Wasser- und Nährstofflimitationen zu. Nachdem die Kultivierungsbedingungen den kalten und nährstoffarmen Bedingungen des Habitats angepasst wurden, konnten 108 koloniebildende Einheiten heterotropher Bakterien pro Gramm Boden angereichert und daraus 148 Isolate gewonnen werden. Zwei neue psychrotolerante Bakterien, Herbaspirillum psychrotolerans PB1T und Chryseobacterium frigidisoli PB4T, wurden detailiert charakterisiert und als jeweils neue Spezies beschrieben. Die Anpassungsstrategien der Mikroorganismen an die extremen antarktischen Bedingungen zeigten sich in der Aktivität extrazellulärer Enzyme bei niedriger Temperatur, die mit derer temperierter Habitate vergleichbar ist, und in der Fähigkeit der Mikroorganismen, die Fettsäurezusammensetzung der Zellmembran zu ändern. Eine neue Fettsäure, die bisher in keinen anderen Mikroorganismus gefunden wurde, spielt eine entscheidende Rolle in der Anpassung des neu-beschriebenen Bakteriums C. frigidisoli an niedrige Temperaturen und saure pH-Werte. Diese Arbeit gibt einen Einblick in die Vielfalt, Verteilung und Anpassung mikrobieller Gemeinschaften in nährstoffarmen und Kälte-beeinflussten Habitaten und zeigt, dass Antarktische Gletschervorfelder geeignete Modellsysteme, um bakterielle Besiedelung in Verbindung zu Bodenbildung zu untersuchen. KW - Antarktis KW - Gletschervorfeld KW - mikrobielle Gemeinschaften KW - Anpassung KW - Kultivierung KW - Antarctica KW - glacier forefield KW - microbial communities KW - adaptation KW - cultivation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67424 ER - TY - THES A1 - Beamish, Alison Leslie T1 - Hyperspectral remote sensing of the spatial and temporal heterogeneity of low Arctic vegetation T1 - Hyperspektrale Fernerkundung der räumlichen und zeitlichen Heterogenität niedriger arktischer Vegetation BT - the role of phenology, vegetation colour, and intrinsic ecosystem components BT - die Rolle von Phänologie, Vegetationsfarbe und intrinsischer Ökosystemkomponenten N2 - Arctic tundra ecosystems are experiencing warming twice the global average and Arctic vegetation is responding in complex and heterogeneous ways. Shifting productivity, growth, species composition, and phenology at local and regional scales have implications for ecosystem functioning as well as the global carbon and energy balance. Optical remote sensing is an effective tool for monitoring ecosystem functioning in this remote biome. However, limited field-based spectral characterization of the spatial and temporal heterogeneity limits the accuracy of quantitative optical remote sensing at landscape scales. To address this research gap and support current and future satellite missions, three central research questions were posed: • Does canopy-level spectral variability differ between dominant low Arctic vegetation communities and does this variability change between major phenological phases? • How does canopy-level vegetation colour images recorded with high and low spectral resolution devices relate to phenological changes in leaf-level photosynthetic pigment concentrations? • How does spatial aggregation of high spectral resolution data from the ground to satellite scale influence low Arctic tundra vegetation signatures and thereby what is the potential of upcoming hyperspectral spaceborne systems for low Arctic vegetation characterization? To answer these questions a unique and detailed database was assembled. Field-based canopy-level spectral reflectance measurements, nadir digital photographs, and photosynthetic pigment concentrations of dominant low Arctic vegetation communities were acquired at three major phenological phases representing early, peak and late season. Data were collected in 2015 and 2016 in the Toolik Lake Research Natural Area located in north central Alaska on the North Slope of the Brooks Range. In addition to field data an aerial AISA hyperspectral image was acquired in the late season of 2016. Simulations of broadband Sentinel-2 and hyperspectral Environmental and Mapping Analysis Program (EnMAP) satellite reflectance spectra from ground-based reflectance spectra as well as simulations of EnMAP imagery from aerial hyperspectral imagery were also obtained. Results showed that canopy-level spectral variability within and between vegetation communities differed by phenological phase. The late season was identified as the most discriminative for identifying many dominant vegetation communities using both ground-based and simulated hyperspectral reflectance spectra. This was due to an overall reduction in spectral variability and comparable or greater differences in spectral reflectance between vegetation communities in the visible near infrared spectrum. Red, green, and blue (RGB) indices extracted from nadir digital photographs and pigment-driven vegetation indices extracted from ground-based spectral measurements showed strong significant relationships. RGB indices also showed moderate relationships with chlorophyll and carotenoid pigment concentrations. The observed relationships with the broadband RGB channels of the digital camera indicate that vegetation colour strongly influences the response of pigment-driven spectral indices and digital cameras can track the seasonal development and degradation of photosynthetic pigments. Spatial aggregation of hyperspectral data from the ground to airborne, to simulated satel-lite scale was influenced by non-photosynthetic components as demonstrated by the distinct shift of the red edge to shorter wavelengths. Correspondence between spectral reflectance at the three scales was highest in the red spectrum and lowest in the near infra-red. By artificially mixing litter spectra at different proportions to ground-based spectra, correspondence with aerial and satellite spectra increased. Greater proportions of litter were required to achieve correspondence at the satellite scale. Overall this thesis found that integrating multiple temporal, spectral, and spatial data is necessary to monitor the complexity and heterogeneity of Arctic tundra ecosystems. The identification of spectrally similar vegetation communities can be optimized using non-peak season hyperspectral data leading to more detailed identification of vegetation communities. The results also highlight the power of vegetation colour to link ground-based and satellite data. Finally, a detailed characterization non-photosynthetic ecosystem components is crucial for accurate interpretation of vegetation signals at landscape scales. N2 - Die arktische Erwärmung beeinflusst Produktivität, Wachstums, Artenzusammensetzung, Phänologie und den Reproduktionserfolg arktischer Vegetation, mit Auswirkungen auf die Ökosystemfunktionen sowie auf den globalen Kohlenstoff- und Energiehaushalt. Feldbasierte Messungen und spektrale Charakterisierungen der räumlichen und zeitlichen Heterogenität arktischer Vegetationsgemeinschaften sind limitiert und die Genauigkeit fernerkundlicher Methoden im Landschaftsmaßstab eingeschränkt. Um diese Forschungslücke zu schließen und aktuelle und zukünftige Satellitenmissionen zu unterstützen, wurden drei zentrale Forschungsfragen entwickelt: 1) Wie unterscheidet sich die spektrale Variabilität des Kronendaches zwischen dominanten Vegetationsgemeinschaften der niederen Arktis und wie verändert sich diese Variabilität zwischen den wichtigsten phänologischen Phasen? 2) Wie hängen Aufnahmen der Vegetationsfarbe des Kronendaches von hoch und niedrig auflösenden Geräten mit phänologischen Veränderungen des photosynthetischen Pigmentgehalts auf Blattebene zusammen? 3) Wie beeinflusst die räumliche Aggregation von Daten mit hoher spektraler Auflösung von der Boden- bis zur Satelliten-Skala die arktischen Vegetationssignale der Tundra und welches Potenzial haben zukünftige hyperspektraler Satellitensysteme für die arktische Vegetationscharakterisierung? Zur Beantwortung dieser Fragen wurde eine detaillierte Datenbank aus feldbasierten Daten erstellt und mit hyperspektralen Luftbildern sowie multispektralen Sentinel-2 und simulierten hyperspektralen EnMAP Satellitendaten verglichen. Die Ergebnisse zeigten, dass die Spätsai-son am besten geeignet ist um dominante Vegetationsgemeinschaften mit Hilfe von hyper-spektralen Daten zu identifizieren. Ebenfalls konnte gezeigt werden, dass die mit handelsüb-lichen Digitalkameras aufgenommene Vegetationsfarbe pigmentgesteuerte Spektralindizes stark beeinflusst und den Verlauf von photosynthetischen Pigmenten nachverfolgen kann. Die räumliche Aggregation hyperspektraler Daten von der Boden- über die Luft- zur Satelli-tenskala wurde durch nicht-photosynthetische Komponenten beeinflusst und die spektralen Reflexionsvermögen der drei Skalen stimmten im roten Spektrum am höchsten und im nahen Infrarotbereich am niedrigsten überein. Die vorliegende Arbeit zeigt, dass die Integration zeitlicher, spektraler und räumlicher Daten notwendig ist, um Komplexität und Heterogenität arktischer Vegetationsreaktionen in Reaktion auf klimatische Veränderungen zu überwachen. KW - hyperspectral remote sensing KW - Arctic tundra KW - vegetation KW - imaging spectroscopy KW - hyperspektral Fernerkundung KW - arktische Tundra KW - Vegetation KW - Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425922 ER - TY - THES A1 - Behrens, Ricarda T1 - Causes for slow weathering and erosion in the steep, warm, monsoon-subjected Highlands of Sri Lanka T1 - Ursache von langsamer Verwitterung und Erosion im steilen, warmen und Monsun-beeinflussten Hochland von Sri Lanka N2 - In the Highlands of Sri Lanka, erosion and chemical weathering rates are among the lowest for global mountain denudation. In this tropical humid setting, highly weathered deep saprolite profiles have developed from high-grade metamorphic charnockite during spheroidal weathering of the bedrock. The spheroidal weathering produces rounded corestones and spalled rindlets at the rock-saprolite interface. I used detailed textural, mineralogical, chemical, and electron-microscopic (SEM, FIB, TEM) analyses to identify the factors limiting the rate of weathering front advance in the profile, the sequence of weathering reactions, and the underlying mechanisms. The first mineral attacked by weathering was found to be pyroxene initiated by in situ Fe oxidation, followed by in situ biotite oxidation. Bulk dissolution of the primary minerals is best described with a dissolution – re-precipitation process, as no chemical gradients towards the mineral surface and sharp structural boundaries are observed at the nm scale. Only the local oxidation in pyroxene and biotite is better described with an ion by ion process. The first secondary phases are oxides and amorphous precipitates from which secondary minerals (mainly smectite and kaolinite) form. Only for biotite direct solid state transformation to kaolinite is likely. The initial oxidation of pyroxene and biotite takes place in locally restricted areas and is relatively fast: log J = -11 molmin/(m2 s). However, calculated corestone-scale mineral oxidation rates are comparable to corestone-scale mineral dissolution rates: log R = -13 molpx/(m2 s) and log R = -15 molbt/(m2 s). The oxidation reaction results in a volume increase. Volumetric calculations suggest that this observed oxidation leads to the generation of porosity due to the formation of micro-fractures in the minerals and the bedrock allowing for fluid transport and subsequent dissolution of plagioclase. At the scale of the corestone, this fracture reaction is responsible for the larger fractures that lead to spheroidal weathering and to the formation of rindlets. Since these fractures have their origin from the initial oxidational induced volume increase, oxidation is the rate limiting parameter for weathering to take place. The ensuing plagioclase weathering leads to formation of high secondary porosity in the corestone over a distance of only a few cm and eventually to the final disaggregation of bedrock to saprolite. As oxidation is the first weathering reaction, the supply of O2 is a rate-limiting factor for chemical weathering. Hence, the supply of O2 and its consumption at depth connects processes at the weathering front with erosion at the surface in a feedback mechanism. The strength of the feedback depends on the relative weight of advective versus diffusive transport of O2 through the weathering profile. The feedback will be stronger with dominating diffusive transport. The low weathering rate ultimately depends on the transport of O2 through the whole regolith, and on lithological factors such as low bedrock porosity and the amount of Fe-bearing primary minerals. In this regard the low-porosity charnockite with its low content of Fe(II) bearing minerals impedes fast weathering reactions. Fresh weatherable surfaces are a pre-requisite for chemical weathering. However, in the case of the charnockite found in the Sri Lankan Highlands, the only process that generates these surfaces is the fracturing induced by oxidation. Tectonic quiescence in this region and low pre-anthropogenic erosion rate (attributed to a dense vegetation cover) minimize the rejuvenation of the thick and cohesive regolith column, and lowers weathering through the feedback with erosion. N2 - Erosions- und chemische Verwitterungsraten im srilankischen Hochland gehören zu den langsamsten der globalen Gebirgsdenudationsraten. In diesem tropischen, humiden Gebiet entwickelten sich mächtige Verwitterungsprofile – sogenannte Saprolite – auf spheroidal verwittertem, hochgradig metamorphen Charnockit. Spheroidale Verwitterung führt zu abgerundeten „corestones“ mit abgesplitterten Rinden („rindlets“) an der Gesteins – Saprolit Grenze. Zur Identifizierung der ratenlimitierenden Faktoren des Fortschreiten der Verwitterungsfront, der Sequenz der Verwitterungsreaktionen und der dahinterliegenden Mechanismen nutzte ich detaillierte gesteinsstrukturelle, mineralogische, chemische und elektronenmikroskopische (SEM, FIB, TEM) Analysemethoden. Die initiale Verwitterung beginnt mit lokal begrenzter in situ Oxidation in Pyroxen, gefolgt von in situ Oxidation von Biotit. Die Auflösung der Minerale wird am besten durch einen Auflöse – Wiederausfällungs-prozess beschrieben, da zur Mineralgrenze hin keine chemischen Gradienten, dafür aber auf der nm-Skala scharfe strukturelle Grenzen zu beobachten sind. Die ersten ausfallenden Sekundärphasen sind Oxide und amorphe Phasen aus denen sich Sekundärmineral (hauptsächlich Smectit und Kaolinit) bilden. Für Biotit ist auch eine direkte Umwandlung im Festzustand zu Kaolinit möglich. Die initiale Pyroxen- und Biotitoxidation ist relativ schnell: log J = -11 molmin/(m2 s). Berechnete Oxidationsraten auf der corestone-Skala (cm) sind vergleichbar zu Auflöseraten auf derselben Skala: log R = -13 molpx/(m2 s) und log R = -15 molbt/(m2 s). Volumetrische Berechnungen führen zum Schluss, dass die Oxidation mit einhergehender Volumenzunahme zur Entwicklung von Mikrofrakturen in den Mineralen und dem Gesamtgestein führt. Diese begünstigen Fluidtransport und damit einhergehende Plagioklasverwitterung. Des Weiteren ist diese Oxidationsreaktion verantwortlich für die Entstehung der Frakturen bei spheroidaler Verwitterung des Gesteins, welche die „rindlets“ vom „corestone“ abgrenzen. Daraus kann geschlossen werden, dass in situ Oxidation der ratenlimitierende Prozess bei der Verwitterung ist. Plagioklasverwitterung führt zu einer hohen Porositätszunahme und der endgültigen Umwandlung von Gestein zu Saprolit. Da Oxidation die erste Verwitterungsreaktion ist, verbinden die Zuführung und der Verbrauch von O2 zur, beziehungsweise an die Verwitterungsfront Erosion an der Oberfläche mit Prozessen an der Verwitterungsfront über einen Feedbackmechanismus. Daher hängt die langsame Verwitterungsrate letztlich vom Sauerstofftransport durch das Verwitterungsprofil und von lithologischen Faktoren des Charnockit wie zum Beispiel geringe Gesteinsporosität und/oder wenige Fe(II)-haltige Primärminerale ab. Des Weiteren ist der einzige Prozess im Charnockit der frische verwitterbare Oberflächen (eine Voraussetzung für chemische Verwitterung) generiert die oxidations-induzierte Frakturierung. Darüber hinaus minimieren die Abwesenheit von tektonischer Aktivität und geringe prä-anthropogene Erosionsraten in dieser Region den Abtrag des mächtigen und kohäsiven Verwitterungsprofils und somit über den beschriebenen Feedback auch die chemische Verwitterungsrate. KW - Sri Lanka KW - chemical weathering KW - erosion KW - saprolite KW - weathering feedback KW - charnockite KW - critical zone KW - mineral weathering reactions KW - Sri Lanka KW - chemische Verwitterung KW - Erosion KW - Saprolit KW - Verwitterungsfeedback KW - Charnockit KW - kritische Zone KW - Mineralverwitterungsreaktionen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408503 ER - TY - THES A1 - Berger, Florian T1 - Different modes of cooperative transport by molecular motors T1 - Verschiedene Arten kooperativen Transportes mittels molekularer Motoren N2 - Cargo transport by molecular motors is ubiquitous in all eukaryotic cells and is typically driven cooperatively by several molecular motors, which may belong to one or several motor species like kinesin, dynein or myosin. These motor proteins transport cargos such as RNAs, protein complexes or organelles along filaments, from which they unbind after a finite run length. Understanding how these motors interact and how their movements are coordinated and regulated is a central and challenging problem in studies of intracellular transport. In this thesis, we describe a general theoretical framework for the analysis of such transport processes, which enables us to explain the behavior of intracellular cargos based on the transport properties of individual motors and their interactions. Motivated by recent in vitro experiments, we address two different modes of transport: unidirectional transport by two identical motors and cooperative transport by actively walking and passively diffusing motors. The case of cargo transport by two identical motors involves an elastic coupling between the motors that can reduce the motors’ velocity and/or the binding time to the filament. We show that this elastic coupling leads, in general, to four distinct transport regimes. In addition to a weak coupling regime, kinesin and dynein motors are found to exhibit a strong coupling and an enhanced unbinding regime, whereas myosin motors are predicted to attain a reduced velocity regime. All of these regimes, which we derive both by analytical calculations and by general time scale arguments, can be explored experimentally by varying the elastic coupling strength. In addition, using the time scale arguments, we explain why previous studies came to different conclusions about the effect and relevance of motor-motor interference. In this way, our theory provides a general and unifying framework for understanding the dynamical behavior of two elastically coupled molecular motors. The second mode of transport studied in this thesis is cargo transport by actively pulling and passively diffusing motors. Although these passive motors do not participate in active transport, they strongly enhance the overall cargo run length. When an active motor unbinds, the cargo is still tethered to the filament by the passive motors, giving the unbound motor the chance to rebind and continue its active walk. We develop a stochastic description for such cooperative behavior and explicitly derive the enhanced run length for a cargo transported by one actively pulling and one passively diffusing motor. We generalize our description to the case of several pulling and diffusing motors and find an exponential increase of the run length with the number of involved motors. N2 - Lastentransport mittels Motorproteinen ist ein grundlegender Mechanismus aller eukaryotischen Zellen und wird üblicherweise von mehreren Motoren kooperativ durchgeführt, die zu einer oder zu verschiedenen Motorarten wie Kinesin, Dynein oder Myosin gehören. Diese Motoren befördern Lasten wie zum Beispiel RNAs, Proteinkomplexe oder Organellen entlang Filamenten, von denen sie nach einer endlichen zurückgelegten Strecke abbinden. Es ist ein zentrales und herausforderndes Problem zu verstehen, wie diese Motoren wechselwirken und wie ihre Bewegungen koordiniert und reguliert werden. In der vorliegenden Arbeit wird eine allgemeine theoretische Herangehensweise zur Untersuchung solcher Transportprozesse beschrieben, die es uns ermöglicht, das Verhalten von intrazellularem Transport, ausgehend von den Transporteigenschaften einzelner Motoren und ihren Wechselwirkungen, zu verstehen. Wir befassen uns mit zwei Arten kooperativen Transports, die auch kürzlich in verschiedenen in vitro-Experimenten untersucht wurden: (i) gleichgerichteter Transport mit zwei identischen Motorproteinen und (ii) kooperativer Transport mit aktiv schreitenden und passiv diffundierenden Motoren. Beim Lastentransport mit zwei identischen Motoren sind die Motoren elastisch gekoppelt, was eine Verminderung ihrer Geschwindigkeit und/oder ihrer Bindezeit am Filament hervorrufen kann. Wir zeigen, dass solch eine elastische Kopplung im Allgemeinen zu vier verschiedenen Transportcharakteristiken führt. Zusätzlich zu einer schwachen Kopplung, können bei Kinesinen und Dyneinen eine starke Kopplung und ein verstärktes Abbinden auftreten, wohingegen bei Myosin Motoren eine verminderte Geschwindigkeit vorhergesagt wird. All diese Transportcharakteristiken, die wir mit Hilfe analytischer Rechnungen und Zeitskalenargumenten herleiten, können durch Änderung der elastischen Kopplung experimentell untersucht werden. Zusätzlich erklären wir anhand der Zeitskalenargumente, warum frühere Untersuchungen zu unterschiedlichen Erkenntnissen über die Auswirkung und die Wichtigkeit der gegenseitigen Beeinflussung der Motoren gelangt sind. Auf diese Art und Weise liefert unsere Theorie eine allgemeine und vereinheitlichende Beschreibung des dynamischen Verhaltens von zwei elastisch gekoppelten Motorproteinen. Die zweite Art von Transport, die in dieser Arbeit untersucht wird ist der Lastentransport durch aktiv ziehende und passiv diffundierende Motoren. Obwohl die passiven Motoren nicht zum aktiven Transport beitragen, verlängern sie stark die zurückgelegte Strecke auf dem Filament. Denn wenn ein aktiver Motor abbindet, wird das Lastteilchen immer noch am Filament durch den passiven Motor festgehalten, was dem abgebundenen Motor die Möglichkeit gibt, wieder an das Filament anzubinden und den aktiven Transport fortzusetzen. Für dieses kooperative Verhalten entwickeln wir eine stochastische Beschreibung und leiten explizit die verlängerte Transportstrecke für einen aktiv ziehenden und einen passiv diffundierenden Motor her. Wir verallgemeinern unsere Beschreibung für den Fall von mehreren ziehenden und diffundierenden Motoren und finden ein exponentielles Anwachsen der zurückgelegten Strecke in Abhängigkeit von der Anzahl der beteiligten Motoren. KW - molekulare Motoren KW - kooperativer Transport KW - intrazellulärer Transport KW - elastische Kopplung KW - stochastische Prozesse KW - molecular motors KW - cooperative transport KW - intracellular transport KW - elastic coupling KW - stochastic processes Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60319 ER - TY - THES A1 - Bierbaum, Veronika T1 - Chemomechanical coupling and motor cycles of the molecular motor myosin V T1 - Chemomechanische Kopplung und Motorzyklen für den molekularen Motor Myosin V N2 - In the living cell, the organization of the complex internal structure relies to a large extent on molecular motors. Molecular motors are proteins that are able to convert chemical energy from the hydrolysis of adenosine triphosphate (ATP) into mechanical work. Being about 10 to 100 nanometers in size, the molecules act on a length scale, for which thermal collisions have a considerable impact onto their motion. In this way, they constitute paradigmatic examples of thermodynamic machines out of equilibrium. This study develops a theoretical description for the energy conversion by the molecular motor myosin V, using many different aspects of theoretical physics. Myosin V has been studied extensively in both bulk and single molecule experiments. Its stepping velocity has been characterized as a function of external control parameters such as nucleotide concentration and applied forces. In addition, numerous kinetic rates involved in the enzymatic reaction of the molecule have been determined. For forces that exceed the stall force of the motor, myosin V exhibits a 'ratcheting' behaviour: For loads in the direction of forward stepping, the velocity depends on the concentration of ATP, while for backward loads there is no such influence. Based on the chemical states of the motor, we construct a general network theory that incorporates experimental observations about the stepping behaviour of myosin V. The motor's motion is captured through the network description supplemented by a Markov process to describe the motor dynamics. This approach has the advantage of directly addressing the chemical kinetics of the molecule, and treating the mechanical and chemical processes on equal grounds. We utilize constraints arising from nonequilibrium thermodynamics to determine motor parameters and demonstrate that the motor behaviour is governed by several chemomechanical motor cycles. In addition, we investigate the functional dependence of stepping rates on force by deducing the motor's response to external loads via an appropriate Fokker-Planck equation. For substall forces, the dominant pathway of the motor network is profoundly different from the one for superstall forces, which leads to a stepping behaviour that is in agreement with the experimental observations. The extension of our analysis to Markov processes with absorbing boundaries allows for the calculation of the motor's dwell time distributions. These reveal aspects of the coordination of the motor's heads and contain direct information about the backsteps of the motor. Our theory provides a unified description for the myosin V motor as studied in single motor experiments. N2 - Die hier vorgelegte Arbeit entwickelt unter Verwendung vieler verschiedener Aspekte der statistischen Physik eine Theorie der chemomechanischen Kopplung für den Energieumsatz des molekularen Motors Myosin V. Das Myosin V ist sowohl in chemokinetischen wie in Einzelmolekülexperimenten grundlegend untersucht worden. Seine Schrittgeschwindigkeit ist in Abhängigkeit verschiedener externer Parameter, wie der Nukleotidkonzentration und einer äußeren Kraft, experimentell bestimmt. Darüber hinaus ist eine große Anzahl verschiedener chemokinetischer Raten, die an der enzymatischen Reaktion des Moleküls beteiligt sind, quantitativ erfasst. Unter der Wirkung externer Kräfte, die seine Anhaltekraft überschreiten, verhält sich der Motor wie eine Ratsche: Für Kräfte, die entlang der Schrittbewegung des Motors wirken, hängt seine Geschwindigkeit von der ATP-Konzentration ab, für rückwärts angreifende Kräfte jedoch ist die Bewegung des Motors unabhängig von ATP. Auf der Grundlage der chemischen Zustände des Motors wird eine Netzwerktheorie aufgebaut, die die experimentellen Beobachtungen des Schrittverhaltens für Myosin V einschließt. Diese Netzwerkbeschreibung dient als Grundlage für einen Markovprozess, der die Dynamik des Motors beschreibt. Die Verwendung diskreter Zustände bietet den Vorteil der direkten Erfassung der chemischen Kinetik des Moleküls. Darüber hinaus werden chemische und mechanische Eigenschaften des Motors in gleichem Maße im Modell berücksichtigt. Durch die Erfassung der Enzymkinetik mittels eines stochastischen Prozesses lässt sich die Motordynamik mit Hilfe des stationären Zustands der Netzwerkdarstellung beschreiben. Um diesen zu bestimmen, verwenden wir eine graphentheoretische Methode, die auf Kirchhoff zurückgreift. Wir zeigen in Einklang mit den Gesetzen der Thermodynamik für Nichtgleichgewichtssysteme, dass das Schrittverhalten des Motors von mehreren chemomechanischen Zyklen beeinflusst wird. Weiterhin untersuchen wir das funktionale Verhalten mechanischer Schrittraten in Abhängigkeit der äußeren Kraft unter Verwendung einer geeigneten Fokker-Planck-Gleichung. Hierfür wird auf die Theorie einer kontinuierlichen Beschreibung von molekularen Methoden zurückgegriffen. Wir berechnen Größen wie die mittlere Schrittgeschwindigkeit, das Verhältnis von Vorwärts- und Rückwärtsschritten, und die Lauflänge des Motors in Abhängigkeit einer äußeren angreifenden Kraft sowie der Nukleotidkonzentration, und vergleichen diese mit experimentellen Daten. Für Kräfte, die kleiner als die Anhaltekraft des Motors sind, unterscheidet sich der chemomechanische Zyklus grundlegend von demjenigen, der für große Kräfte dominiert. Diese Eigenschaft resultiert in einem Schrittverhalten, das mit den experimentellen Beobachtungen übereinstimmt. Es ermöglicht weiterhin die Zerlegung des Netzwerks in einzelne Zyklen, die die Bewegung des Motors für verschiedene Bereiche externer Kräfte erfassen. Durch die Erweiterung unseres Modells auf Markovprozesse mit absorbierenden Zuständen können so die Wartezeitenverteilungen für einzelne Zyklen des Motors analytisch berechnet werden. Sie erteilen Aufschluss über die Koordination des Motors und enthalten zudem direkte Informationen über seine Rückwärtsschritte, die experimentell nicht erfasst sind. Für das gesamte Netzwerk werden die Wartezeitenverteilungen mit Hilfe eines Gillespie-Algorithmus bestimmt. Unsere Theorie liefert eine einheitliche Beschreibung der Eigenschaften von Myosin V, die in Einzelmolekülexperimenten erfasst werden können. KW - statistische Physik KW - Markov-Prozesse KW - molekulare Motoren KW - statistical physics KW - markov processes KW - molecular motors Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53614 ER - TY - THES A1 - Bojdys, Michael Janus T1 - On new allotropes and nanostructures of carbon nitrides T1 - Über neue Allotrope und Nanostrukturen von Karbonitriden N2 - In the first section of the thesis graphitic carbon nitride was for the first time synthesised using the high-temperature condensation of dicyandiamide (DCDA) – a simple molecular precursor – in a eutectic salt melt of lithium chloride and potassium chloride. The extent of condensation, namely next to complete conversion of all reactive end groups, was verified by elemental microanalysis and vibrational spectroscopy. TEM- and SEM-measurements gave detailed insight into the well-defined morphology of these organic crystals, which are not based on 0D or 1D constituents like known molecular or short-chain polymeric crystals but on the packing motif of extended 2D frameworks. The proposed crystal structure of this g-C3N4 species was derived in analogy to graphite by means of extensive powder XRD studies, indexing and refinement. It is based on sheets of hexagonally arranged s-heptazine (C6N7) units that are held together by covalent bonds between C and N atoms. These sheets stack in a graphitic, staggered fashion adopting an AB-motif, as corroborated by powder X-ray diffractometry and high-resolution transmission electron microscopy. This study was contrasted with one of many popular – yet unsuccessful – approaches in the last 30 years of scientific literature to perform the condensation of an extended carbon nitride species through synthesis in the bulk. The second section expands the repertoire of available salt melts introducing the lithium bromide and potassium bromide eutectic as an excellent medium to obtain a new phase of graphitic carbon nitride. The combination of SEM, TEM, PXRD and electron diffraction reveals that the new graphitic carbon nitride phase stacks in an ABA’ motif forming unprecedentedly large crystals. This section seizes the notion of the preceding chapter, that condensation in a eutectic salt melt is the key to obtain a high degree of conversion mainly through a solvatory effect. At the close of this chapter ionothermal synthesis is seen established as a powerful tool to overcome the inherent kinetic problems of solid state reactions such as incomplete polymerisation and condensation in the bulk especially when the temperature requirement of the reaction in question falls into the proverbial “no man’s land” of classical solvents, i.e. above 250 to 300 °C. The following section puts the claim to the test, that the crystalline carbon nitrides obtained from a salt melt are indeed graphitic. A typical property of graphite – namely the accessibility of its interplanar space for guest molecules – is transferred to the graphitic carbon nitride system. Metallic potassium and graphitic carbon nitride are converted to give the potassium intercalation compound, K(C6N8)3 designated according to its stoichiometry and proposed crystal structure. Reaction of the intercalate with aqueous solvents triggers the exfoliation of the graphitic carbon nitride material and – for the first time – enables the access of singular (or multiple) carbon nitride sheets analogous to graphene as seen in the formation of sheets, bundles and scrolls of carbon nitride in TEM imaging. The thus exfoliated sheets form a stable, strongly fluorescent solution in aqueous media, which shows no sign in UV/Vis spectroscopy that the aromaticity of individual sheets was subject to degradation. The final section expands on the mechanism underlying the formation of graphitic carbon nitride by literally expanding the distance between the covalently linked heptazine units which constitute these materials. A close examination of all proposed reaction mechanisms to-date in the light of exhaustive DSC/MS experiments highlights the possibility that the heptazine unit can be formed from smaller molecules, even if some of the designated leaving groups (such as ammonia) are substituted by an element, R, which later on remains linked to the nascent heptazine. Furthermore, it is suggested that the key functional groups in the process are the triazine- (Tz) and the carbonitrile- (CN) group. On the basis of these assumptions, molecular precursors are tailored which encompass all necessary functional groups to form a central heptazine unit of threefold, planar symmetry and then still retain outward functionalities for self-propagated condensation in all three directions. Two model systems based on a para-aryl (ArCNTz) and para-biphenyl (BiPhCNTz) precursors are devised via a facile synthetic procedure and then condensed in an ionothermal process to yield the heptazine based frameworks, HBF-1 and HBF-2. Due to the structural motifs of their molecular precursors, individual sheets of HBF-1 and HBF-2 span cavities of 14.2 Å and 23.0 Å respectively which makes both materials attractive as potential organic zeolites. Crystallographic analysis confirms the formation of ABA’ layered, graphitic systems, and the extent of condensation is confirmed as next-to-perfect by elemental analysis and vibrational spectroscopy. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung neuer Allotropen und Nanostrukturen von Karbonitriden und berührt einige ihrer möglichen Anwendungen. Alle gezeigten, ausgedehnten, kovalent verbundenen Karbonitridgerüste wurden in einem ionothermalen Syntheseprozess – einer Hochtemperaturbehandlung in einem eutektischen Salzgemisch als ungewöhnlichem Lösungsmittel – aus einfachen Präkursormolkülen erzeugt. Der Kondensationsmechanismus folgt einer temperaturinduzierten Deaminierung und Bildung einer ausgedehnten, aromatischen Einheit; des dreifach substituierten Heptazines. Die Dissertation folgt vier übergreifenden Themen, beginnend mit der Einleitung in Karbonitridsysteme und der Suche nach einem Material, welches einzig aus Kohlenstoff und Stickstoff aufgebaut ist – einer Suche, die 1834 mit den Beobachtungen Justus von Liebigs „über einige Stickstoffverbindungen“ begann. Der erste Abschnitt zeigt die erfolgreiche Synthese von graphitischem Karbonitrid (g-C3N4); einer Spezies, welche auf Schichten hexagonal angeordneter s-Heptazineinheiten beruht, die durch kovalente Bindungen zwischen C- und N-Atomen zusammengehalten werden, und welche in einer graphitischen, verschobenen Art und Weise gestapelt sind. Der zweite Abschnitt berührt die Vielfalt von Salzschmelzensystemen, die für die Ionothermalsynthese geeignet sind und zeigt auf, dass die bloße Veränderung der Salzschmelze eine andere Kristallphase des graphitischen Karbonitrides ergibt – das g-C3N4-mod2. Im dritten Abschnitt wird vom Graphit bekannte Interkallationschemie auf das g-C3N4 angewendet, um eine Kalliuminterkallationsverbindung des graphitischen Karbonitirdes zu erhalten (K(C6N8)3). Diese Verbindung kann in Analogie zum graphitischen System leicht exfoliiert werden, um Bündel von Karbonitridnanoschichten zu erhalten, und weist darüberhinaus interessante optische Eigenschaften auf. Der vierte und letzte Abschnitt handelt von der Einführung von Aryl- und Biphenylbrücken in das Karbonitridmaterial durch rationale Synthese der Präkursormoleküle. Diese ergeben die heptazinbasierten Frameworks, HBF-1 und HBF-2 – zwei kovalente, organische Gerüste. KW - kovalente Rahmenbedingungen KW - mehrschichtige Verbindungen KW - Triazin KW - Heptazine KW - Karbonnitrid Ionothermalsynthese KW - Salzschmelze KW - covalent frameworks KW - layered compounds KW - triazine KW - heptazine KW - carbon nitride KW - ionothermal synthesis KW - salt melt Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41236 ER - TY - THES A1 - Borisova, Dimitriya T1 - Feedback active coatings based on mesoporous silica containers T1 - Rückkopplungsaktive Beschichtungen basierend auf mesoporösen Silika-Behältern N2 - Metalle werden oft während ihrer Anwendung korrosiven Bedingungen ausgesetzt, was ihre Alterungsbeständigkeit reduziert. Deswegen werden korrosionsanfällige Metalle, wie Aluminiumlegierungen mit Schutzbeschichtungen versehen, um den Korrosionsprozess aktiv oder passiv zu verhindern. Die klassischen Schutzbeschichtungen funktionieren als physikalische Barriere zwischen Metall und korrosiver Umgebung und bieten einen passiven Korrosionsschutz nur, wenn sie unbeschädigt sind. Im Gegensatz dazu kann die Korrosion auch im Fall einer Beschädigung mittels aktiver Schutzbeschichtungen gehemmt werden. Chromathaltige Beschichtungen bieten heutzutage den besten aktiven Korrosionsschutz für Aluminiumlegierungen. Aufgrund ihrer Giftigkeit wurden diese weltweit verboten und müssen durch neue umweltfreundliche Schutzbeschichtungen ersetzt werden. Ein potentieller Ersatz sind Schutzbeschichtungen mit integrierten Nano- und Mikrobehältern, die mit ungiftigem Inhibitor gefüllt sind. In dieser Arbeit werden die Entwicklung und Optimierung solcher aktiver Schutzbeschichtungen für die industriell wichtige Aluminiumlegierung AA2024-T3 dargestellt Mesoporöse Silika-Behälter wurden mit dem ungiftigen Inhibitor (2-Mercaptobenzothiazol) beladen und dann in die Matrix anorganischer (SiOx/ZrOx) oder organischer (wasserbasiert) Schichten dispergiert. Zwei Sorten von Silika-Behältern mit unterschiedlichen Größen (d ≈ 80 and 700 nm) wurden verwendet. Diese haben eine große spezifische Oberfläche (≈ 1000 m² g-1), eine enge Porengrößenverteilung mit mittlerer Porenweite ≈ 3 nm und ein großes Porenvolumen (≈ 1 mL g-1). Dank dieser Eigenschaften können große Inhibitormengen im Behälterinneren adsorbiert und gehalten werden. Die Inhibitormoleküle werden bei korrosionsbedingter Erhöhung des pH-Wertes gelöst und freigegeben. Die Konzentration, Position und Größe der integrierten Behälter wurden variiert um die besten Bedingungen für einen optimalen Korrosionsschutz zu bestimmen. Es wurde festgestellt, dass eine gute Korrosionsschutzleistung durch einen Kompromiss zwischen ausreichender Inhibitormenge und guten Barriereeigenschaften hervorgerufen wird. Diese Studie erweitert das Wissen über die wichtigsten Faktoren, die den Korrosionsschutz beeinflussen. Somit wurde die Entwicklung effizienter, aktiver Schutzbeschichtungen ermöglicht, die auf mit Inhibitor beladenen Behältern basieren. N2 - Metals are often used in environments that are conducive to corrosion, which leads to a reduction in their mechanical properties and durability. Coatings are applied to corrosion-prone metals such as aluminum alloys to inhibit the destructive surface process of corrosion in a passive or active way. Standard anticorrosive coatings function as a physical barrier between the material and the corrosive environment and provide passive protection only when intact. In contrast, active protection prevents or slows down corrosion even when the main barrier is damaged. The most effective industrially used active corrosion inhibition for aluminum alloys is provided by chromate conversion coatings. However, their toxicity and worldwide restriction provoke an urgent need for finding environmentally friendly corrosion preventing systems. A promising approach to replace the toxic chromate coatings is to embed particles containing nontoxic inhibitor in a passive coating matrix. This work presents the development and optimization of effective anticorrosive coatings for the industrially important aluminum alloy, AA2024-T3 using this approach. The protective coatings were prepared by dispersing mesoporous silica containers, loaded with the nontoxic corrosion inhibitor 2-mercaptobenzothiazole, in a passive sol-gel (SiOx/ZrOx) or organic water-based layer. Two types of porous silica containers with different sizes (d ≈ 80 and 700 nm, respectively) were investigated. The studied robust containers exhibit high surface area (≈ 1000 m² g-1), narrow pore size distribution (dpore ≈ 3 nm) and large pore volume (≈ 1 mL g-1) as determined by N2 sorption measurements. These properties favored the subsequent adsorption and storage of a relatively large amount of inhibitor as well as its release in response to pH changes induced by the corrosion process. The concentration, position and size of the embedded containers were varied to ascertain the optimum conditions for overall anticorrosion performance. Attaining high anticorrosion efficiency was found to require a compromise between delivering an optimal amount of corrosion inhibitor and preserving the coating barrier properties. This study broadens the knowledge about the main factors influencing the coating anticorrosion efficiency and assists the development of optimum active anticorrosive coatings doped with inhibitor loaded containers. KW - Korrosion KW - Beschichtungen KW - Aluminiumlegierung KW - Silika KW - Nanopartikel KW - mesoporös KW - corrosion KW - coating KW - aluminum alloy KW - silica nanoparticles KW - mesoporous Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63505 ER - TY - THES A1 - Brauer, Dorothée T1 - Chemo-kinematic constraints on Milky Way models from the spectroscopic surveys SEGUE & RAVE T1 - Beschränkungen von Modellen der Milchstraße auf Basis der chemisch-kinematischen Analyse von Beobachtungsdaten der spektroskopischen Himmelsdurchmusterungen SEGUE und RAVE N2 - The Milky Way is only one out of billions of galaxies in the universe. However, it is a special galaxy because it allows to explore the main mechanisms involved in its evolution and formation history by unpicking the system star-by-star. Especially, the chemical fingerprints of its stars provide clues and evidence of past events in the Galaxy’s lifetime. These information help not only to decipher the current structure and building blocks of the Milky Way, but to learn more about the general formation process of galaxies. In the past decade a multitude of stellar spectroscopic Galactic surveys have scanned millions of stars far beyond the rim of the solar neighbourhood. The obtained spectroscopic information provide unprecedented insights to the chemo-dynamics of the Milky Way. In addition analytic models and numerical simulations of the Milky Way provide necessary descriptions and predictions suited for comparison with observations in order to decode the physical properties that underlie the complex system of the Galaxy. In the thesis various approaches are taken to connect modern theoretical modelling of galaxy formation and evolution with observations from Galactic stellar surveys. With its focus on the chemo-kinematics of the Galactic disk this work aims to determine new observational constraints on the formation of the Milky Way providing also proper comparisons with two different models. These are the population synthesis model TRILEGAL based on analytical distribution functions, which aims to simulate the number and distribution of stars in the Milky Way and its different components, and a hybrid model (MCM) that combines an N-body simulation of a Milky Way like galaxy in the cosmological framework with a semi-analytic chemical evolution model for the Milky Way. The major observational data sets in use come from two surveys, namely the “Radial Velocity Experiment” (RAVE) and the “Sloan Extension for Galactic Understanding and Exploration” (SEGUE). In the first approach the chemo-kinematic properties of the thin and thick disk of the Galaxy as traced by a selection of about 20000 SEGUE G-dwarf stars are directly compared to the predictions by the MCM model. As a necessary condition for this, SEGUE's selection function and its survey volume are evaluated in detail to correct the spectroscopic observations for their survey specific selection biases. Also, based on a Bayesian method spectro-photometric distances with uncertainties below 15% are computed for the selection of SEGUE G-dwarfs that are studied up to a distance of 3 kpc from the Sun. For the second approach two synthetic versions of the SEGUE survey are generated based on the above models. The obtained synthetic stellar catalogues are then used to create mock samples best resembling the compiled sample of observed SEGUE G-dwarfs. Generally, mock samples are not only ideal to compare predictions from various models. They also allow validation of the models' quality and improvement as with this work could be especially achieved for TRILEGAL. While TRILEGAL reproduces the statistical properties of the thin and thick disk as seen in the observations, the MCM model has shown to be more suitable in reproducing many chemo-kinematic correlations as revealed by the SEGUE stars. However, evidence has been found that the MCM model may be missing a stellar component with the properties of the thick disk that the observations clearly show. While the SEGUE stars do indicate a thin-thick dichotomy of the stellar Galactic disk in agreement with other spectroscopic stellar studies, no sign for a distinct metal-poor disk is seen in the MCM model. Usually stellar spectroscopic surveys are limited to a certain volume around the Sun covering different regions of the Galaxy’s disk. This often prevents to obtain a global view on the chemo-dynamics of the Galactic disk. Hence, a suitable combination of stellar samples from independent surveys is not only useful for the verification of results but it also helps to complete the picture of the Milky Way. Therefore, the thesis closes with a comparison of the SEGUE G-dwarfs and a sample of RAVE giants. The comparison reveals that the chemo-kinematic relations agree in disk regions where the samples of both surveys show a similar number of stars. For those parts of the survey volumes where one of the surveys lacks statistics they beautifully complement each other. This demonstrates that the comparison of theoretical models on the one side, and the combined observational data gathered by multiple surveys on the other side, are key ingredients to understand and disentangle the structure and formation history of the Milky Way. N2 - Die Milchstraße ist nur eine unter Milliarden von Galaxien im Universum, dennoch ist sie besonders. Sie bietet die einzigartige Möglichkeit anhand ihrer einzeln auflösbaren Sterne und deren im Detail beobachtbaren Eigenschaften die Mechanismen ihrer Evolutions- und Entstehungsgeschichte genau zu studieren und damit Rückschlüsse auf die Entwicklungsprozesse von Galaxien im Allgemeinen zu ziehen. Insbesondere der chemische Fingerabdruck ihrer Sterne liefert dabei Indizien und Beweise für Ereignisse im Leben der Galaxie. In den letzten 15 Jahren wurden daher in einer Vielzahl von Himmeldurchmusterungen Millionen von Sternen in der Milchstraße spektroskopisch beobachtet. Die so gewonnenen Informationen bieten detaillierte Einblicke in die Substrukturen unserer Galaxie und deren chemisch-kinematische Struktur. Ergänzend dazu liefern analytische Modelle und numerische Simulationen der Milchstraße wichtige Beschreibungen, die sich zum Vergleich mit Beobachtungen eignen, um die dem komplexen System der Galaxie zugrunde liegenden exakten physikalischen Eigenschaften entschlüsseln zu können. Die vorliegende Arbeit nutzt verschiedene Ansätze, um moderne theoretische Modelle der Galaxienentstehung und -evolution mit Daten aus stellaren Beobachtungskampagnen zu vergleichen. Die dazu analysierten Beobachtungsdatensätze stammen aus zwei großen Himmelsdurchmusterungen, dem „Radial Velocity Experiment“ (RAVE) und dem „Sloan Extension for Galactic Understanding and Exploration“ (SEGUE). Mit dem Fokus auf der chemisch-kinematischen Struktur der galaktischen Scheibe geht es im Wesentlichen darum, zwei Modelle der Milchstraße zu testen, nämlich ein Populationssynthesemodell (TRILEGAL) und ein Hybridmodell (MCM). Während TRILEGAL auf analytischen Verteilungsfunktionen basiert und zum Ziel hat, die Anzahl und Verteilung der Sterne innerhalb der Galaxie und ihrer unterschiedlichen Komponenten zu simulieren, verbindet das MCM Modell eine kosmologische N-Körper Simulation einer der Milchstraße ähnlichen Galaxie mit einem semi-analytischen Modell zur Beschreibung der chemischen Evolution der Milchstraße. Auf Grundlage einer Auswahl von etwa 20000 SEGUE G-Zwergsternen werden in einem ersten Ansatz die aus den Messdaten gewonnenen chemisch-kinematischen Eigenschaften der dünnen und dicken Scheibe der Milchstraße mit den direkten Vorhersagen des MCM Modells verglichen. Eine notwendige Bedingung dafür ist die Korrektur der Beobachtungsdaten für systematische Fehler bei der Objektauswahl der Beobachtungskampagne. Zudem werden mittels einer Bayesischen Methode spektro-photometrische Distanzen mit Fehlern kleiner als 15% für die Auswahl an SEGUE Sternen berechnet, die sich in einer Entfernung von bis zu 3 kpc von der Sonne befinden. Für den zweiten Ansatz werden basierend auf den oben genannten Modellen zwei synthetische Versionen der SEGUE Himmelsdurchmusterung generiert. Diese künstlichen stellaren Kataloge werden dann verwendet, um Vergleichspseudodatensätze für die verwendeten Zwergsterndaten anzufertigen. Solche synthetischen Testdatensätze eignen sich nicht nur, um die Vorhersagen verschiedener Modelle zu vergleichen, sie können auch zur Validierung der Qualität einzelner Modelle herangezogen werden. Während sich in der Analyse zeigt, dass TRILEGAL sich besonders gut eignet, statistische Eigenschaften der dünnen und dicken galaktischen Scheibe zu reproduzieren, spiegelt das MCM Modell viele der in der Milchstraße beobachtbaren chemisch-kinematischen Korrelationen gut wieder. Trotzdem finden sich Beweise dafür, dass dem MCM Modell eine stellare Komponente fehlt, deren Eigenschaften der in den Beobachtungen sichtbaren dicken Scheibe ähnlich sind. Meist sind spektroskopische Beobachtungskampagnen auf ein bestimmtes Volumen um die Sonne beschränkt. Oftmals verhindert dies die Möglichkeit einen globalen Blick auf die chemisch-kinematischen Eigenschaften der galaktischen Scheibe zu erlangen. Die Kombination von stellaren Daten unabhängiger Kampagnen ist daher nicht nur nützlich für die Verifikation von Ergebnissen, es hilft auch ein ganzheitlicheres Bild der Galaxie zu erlangen. Die vorliegende Arbeit schließt daher mit einem Vergleich der SEGUE G-Zwergsterne und einer Auswahl von RAVE Riesensternen. Es zeigt sich eine gute Übereinstimmung bzgl. der chemisch-kinematischen Struktur der galaktischen Scheibe besonders in denjenigen Regionen, die von einer Vielzahl von SEGUE und RAVE Objekten abgedeckt werden. Für Regionen des Beobachtungsvolumens, in dem die eine oder die andere der beiden Beobachtungskampagnen eine geringere Statistik von beobachteten Sternen aufweist, ergänzen sich RAVE und SEGUE gut. Dies zeigt, dass nicht nur der Vergleich von Beobachtungen und theoretischen Modellen, sondern auch die Kombination von Messdaten aus verschiedenen Himmelsdurchmusterungen wichtig ist, um die Struktur und die Entstehungsgeschichte der Milchstraße zu verstehen und zu entschlüsseln. KW - galaktische Astronomie KW - galactic astronomy KW - Entstehung der Milchstraße KW - Milky Way formation KW - Evolution der Milchstraße KW - Milky Way evolution KW - Milky Way chemo-kinematics KW - Chemokinematik der Milchstraße KW - SEGUE survey KW - SEGUE Beobachtungskampagne KW - RAVE survey KW - RAVE Beobachtungskampagne KW - mock data catalogues KW - Pseudodatensätze Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403968 ER - TY - THES A1 - Breitenbach, Sebastian Franz Martin T1 - Changes in monsoonal precipitation and atmospheric circulation during the Holocene reconstructed from stalagmites from Northeastern India T1 - Veränderungen monsunalen Niederschlages und atmosphärischer Zirkulation während des Holozäns, rekonstruiert aus Stalagmiten aus Nordostindien N2 - Recent years witnessed a vast advent of stalagmites as palaeoclimate archives. The multitude of geochemical and physical proxies and a promise of a precise and accurate age model greatly appeal to palaeoclimatologists. Although substantial progress was made in speleothem-based palaeoclimate research and despite high-resolution records from low-latitudinal regions, proving that palaeo-environmental changes can be archived on sub-annual to millennial time scales our comprehension of climate dynamics is still fragmentary. This is in particular true for the summer monsoon system on the Indian subcontinent. The Indian summer monsoon (ISM) is an integral part of the intertropical convergence zone (ITCZ). As this rainfall belt migrates northward during boreal summer, it brings monsoonal rainfall. ISM strength depends however on a variety of factors, including snow cover in Central Asia and oceanic conditions in the Indic and Pacific. Presently, many of the factors influencing the ISM are known, though their exact forcing mechanism and mutual relations remain ambiguous. Attempts to make an accurate prediction of rainfall intensity and frequency and drought recurrence, which is extremely important for South Asian countries, resemble a puzzle game; all interaction need to fall into the right place to obtain a complete picture. My thesis aims to create a faithful picture of climate change in India, covering the last 11,000 ka. NE India represents a key region for the Bay of Bengal (BoB) branch of the ISM, as it is here where the monsoon splits into a northwestward and a northeastward directed arm. The Meghalaya Plateau is the first barrier for northward moving air masses and receives excessive summer rainfall, while the winter season is very dry. The proximity of Meghalaya to the Tibetan Plateau on the one hand and the BoB on the other hand make the study area a key location for investigating the interaction between different forcings that governs the ISM. A basis for the interpretation of palaeoclimate records, and a first important outcome of my thesis is a conceptual model which explains the observed pattern of seasonal changes in stable isotopes (d18O and d2H) in rainfall. I show that although in tropical and subtropical regions the amount effect is commonly called to explain strongly depleted isotope values during enhanced rainfall, alone it cannot account for observed rainwater isotope variability in Meghalaya. Monitoring of rainwater isotopes shows no expected negative correlation between precipitation amount and d18O of rainfall. In turn I find evidence that the runoff from high elevations carries an inherited isotopic signature into the BoB, where during the ISM season the freshwater builds a strongly depleted plume on top of the marine water. The vapor originating from this plume is likely to memorize' and transmit further very negative d18O values. The lack of data does not allow for quantication of this plume effect' on isotopes in rainfall over Meghalaya but I suggest that it varies on seasonal to millennial timescales, depending on the runoff amount and source characteristics. The focal point of my thesis is the extraction of climatic signals archived in stalagmites from NE India. High uranium concentration in the stalagmites ensured excellent age control required for successful high-resolution climate reconstructions. Stable isotope (d18O and d13C) and grey-scale data allow unprecedented insights into millennial to seasonal dynamics of the summer and winter monsoon in NE India. ISM strength (i. e. rainfall amount) is recorded in changes in d18Ostalagmites. The d13C signal, reflecting drip rate changes, renders a powerful proxy for dry season conditions, and shows similarities to temperature-related changes on the Tibetan Plateau. A sub-annual grey-scale profile supports a concept of lower drip rate and slower stalagmite growth during dry conditions. During the Holocene, ISM followed a millennial-scale decrease of insolation, with decadal to centennial failures resulting from atmospheric changes. The period of maximum rainfall and enhanced seasonality corresponds to the Holocene Thermal Optimum observed in Europe. After a phase of rather stable conditions, 4.5 kyr ago, the strengthening ENSO system dominated the ISM. Strong El Nino events weakened the ISM, especially when in concert with positive Indian Ocean dipole events. The strongest droughts of the last 11 kyr are recorded during the past 2 kyr. Using the advantage of a well-dated stalagmite record at hand I tested the application of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to detect sub-annual to sub-decadal changes in element concentrations in stalagmites. The development of a large ablation cell allows for ablating sample slabs of up to 22 cm total length. Each analyzed element is a potential proxy for different climatic parameters. Combining my previous results with the LAICP- MS-generated data shows that element concentration depends not only on rainfall amount and associated leaching from the soil. Additional factors, like biological activity and hydrogeochemical conditions in the soil and vadose zone can eventually affect the element content in drip water and in stalagmites. I present a theoretical conceptual model for my study site to explain how climatic signals can be transmitted and archived in stalagmite carbonate. Further, I establish a first 1500 year long element record, reconstructing rainfall variability. Additionally, I hypothesize that volcanic eruptions, producing large amounts of sulfuric acid, can influence soil acidity and hence element mobilization. N2 - Stalagmiten erfuhren in den letzten Jahren vermehrt Aufmerksamkeit als bedeutende Paläoklima- Archive. Paläoklimatologen sind beeindruckt von der grossen Zahl geochemischer und physikalischer Indikatoren (Proxies) und der Möglichkeit, präzise absolute Altersmodelle zu erstellen. Doch obwohl substantielle Fortschritte in der speleothem-basierten Klimaforschung gemacht wurden, und trotz hochaufgelöster Archive aus niederen Breiten, welche zeigen, das Umweltveränderungen auf Zeitskalen von Jahren bis Jahrtausenden archiviert und rekonstruiert werden können, bleibt unser Verständnis der Klimadynamik fragmentarisch. Ganz besonders gilt dies für den Indischen Sommermonsun (ISM) auf dem Indischen Subkontinent. Der ISM ist heute als ein integraler Bestandteil der intertropischen Konvergenzzone verstanden. Sobald dieser Regengürtel während des borealen Sommer nordwärts migriert kann der ISM seine feuchten Luftmassen auf dem Asiatischen Festland entladen. Dabei hängt die Stärke des ISM von einer Vielzahl von Faktoren ab. Zu diesen gehören die Schneedicke in Zentralasien im vorhergehenden Winter und ozeanische Bedingungen im Indischen und Pazifschen Ozean. Heute sind viele dieser Faktoren bekannt. Trotzdem bleiben deren Mechanismen und internen Verbindungen weiterhin mysteriös. Versuche, korrekte Vorhersagen zu Niederschlagsintensität und Häufigkeit oder zu Dürreereignissen zu erstellen ähneln einem Puzzle. All die verschiedenen Interaktionen müssen an die richtige Stelle gelegt werden, um ein sinnvolles Bild entstehen zu lassen. Meine Dissertation versucht, ein vertrauenswürdiges Bild des sich wandelnden Holozänen Klimas in Indien zu erstellen. NE Indien ist eine Schlüsselregion für den östlichen Arm des ISM, da sich hier der ISM in zwei Arme aufteilt, einen nordwestwärts und einen nordostwärts gerichteten. Das Meghalaya Plateau ist das erste Hindernis für die sich nordwärts bewegenden Luftmassen und erhält entsprechend exzessive Niederschläge während des Sommers. Die winterliche Jahreszeit dagegen ist sehr trocken. Die Nähe zum Tibetplateau einerseits und der Bucht von Bengalen andererseits determinieren die Schlüsselposition dieser Region für das Studium der Interaktionen der den ISM beeinflussenden Kräfte. Ein Fundament für die Interpretation der Paläoklimarecords und ein erstes wichtiges Ergebnis meiner Arbeit ist ein konzeptuelles Modell, welches die beobachteten saisonalen Veränderungen stabiler Isotope (d18O und d2H) im Niederschlag erklärt. Ich zeige, das obwohl in tropischen und subtropischen Regionen meist der amount effect zur Erklärung stark negativer Isotopenwerte während starker Niederschläge herangezogen wird, dieser allein nicht ausreicht, um die Isotopenvariabilität im Niederschlag Meghalaya's zu erklären. Die Langzeitbeobachtung der Regenwasserisotopie zeigt keine negative Korrelation zwischen Niederschlagsmenge und d18O. Es finden sich Hinweise, das der Abfluss aus den Hochgebirgsregionen Tibets und des Himalaya eine Isotopensignatur an das Oberflächenwasser der Bucht von Bengalen vererbt. Dort bildet sich aus isotopisch stark abgereicherten Wässern während des ISM eine Süsswasserlinse aus. Es ist wahrscheinlich, das Wasserdampf, der aus dieser Linse stammt, ein Isotopensignal aufgeprägt bekommt, welches abgereichertes d18O weitertransportiert. Der Mangel an Daten lässt es bisher leider nicht zu, quantitative Aussagen über den Einfluss dieses plume effect' auf Niederschläge in Meghalaya zu treffen. Es lässt sich allerdings vermuten, das dieser Einfluss auf saisonalen wie auch auf langen Zeitskalen variabel ist, abhängig vom Abfluss und der Quellencharacteristik. Der Fokus meiner Arbeit liegt in der Herauslösung klimatischer Signale aus nordostindischen Stalagmiten. Hohe Urankonzentrationen in diesen Stalagmiten erlaubt eine exzellente Alterskontrolle, die für hochauflösende Klimarekonstruktionen unerlässlich ist. Die stabilen Isotope (d18O und d13C), sowie Grauwertdaten, erlauben einmalige Einblicke in die Dynamik des Sommer und auch des Wintermonsun in NE Indien. Die ISM Stärke (d. h. Niederschlagsmenge) wird in Veränderungen in den d18Ostalagmites reflektiert. Das d13C Signal, welches Tropfratenänderungen speichert, dient als potenter Indikator für winterliche Trockenheitsbedingungen. Es zeigt Ähnlichkeit zu temperaturabhängigen Veränderungen auf dem Tibetplateau. Das sub-annuell aufgelöste Grauwertprofil stärkt das Konzept, das verminderte Tropfraten und langsameres Stalagmitenwachstum eine Folge von Trockenheit sind. Während des Holozäns folgte der ISM der jahrtausendelangen Verringerung der Insolation. Es finden sich aber ebenso rapide Anomalien, die aus atmosphärischen Veränderungen resultieren. Die Phase des höchsten Niederschlages und erhöhter Saisonalität korrespondiert mit dem Holozänen Thermalen Maximum. Nach einer Phase einigermassen stabilen Bedingungen begann vor ca. 4500 Jahren ENSO einen zunehmenden Einfluss auf den ISM auszuüben. Starke El Nino Ereignisse schwächen den ISM, besonders wenn diese zeitgleich mit positiven Indian Ocean Dipole Ereignissen auftreten. Die stärksten Dürren des gesamten Holozäns traten in den letzten 2000 Jahren auf. Um zusätzliche Informationen aus den hervorragenden Proben zu gewinnen nutzte ich die Vorteile der laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Diese erlaubt die Detektion sub-annueller bis sub-dekadischer Elementkonzentrationsveränderungen in Stalagmiten. Mittels einer neu entwickelten Ablationszelle konnten Proben von maximal 22 cm Länge untersucht werden. Jedes analysierte Element ist ein potentieller Träger einer Klimainformation. Die Kombination der früheren Ergebnisse mit denen der LA-IPC-MS zeigt, das die Elementkonzentrationen nicht nur von Niederschlagsveränderungen und assoziiertem Auswaschen aus dem Boden abhängen. Zusätzlich können auch die biologische Aktivität und hydrogeochemische Bedingungen in der vadosen Zone Einfluss auf die Elementzusammensetzung im Tropfwasser und in den Stalagmiten haben. Darum entwickelte ich ein theoretisches Modell für meinen Standort, um zu klären, wie Klimasignale von der Atmosphäre in die Höhle transportiert werden können. Ein anschliessend rekonstruierter 1500 Jahre langer Proxyrecord zeigt Niederschlagsvariabilität an. Zudem besteht die Möglichkeit, das Vulkaneruptionen, welche grosse Mengen an Schwefelsäure produzieren, eine Bodenversauerung verursachen und damit die Elementmobilisierung verstärken können. KW - Indischer Sommermonsun KW - Stabile Isotope KW - Stalagmiten KW - Holozän KW - Bucht von Bengalen KW - Indian Summer Monsoon KW - Bay of Bengal KW - stable isotopes KW - stalagmites KW - Laser ablation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-37807 ER - TY - THES A1 - Brill, Fabio Alexander T1 - Applications of machine learning and open geospatial data in flood risk modelling N2 - Der technologische Fortschritt erlaubt es, zunehmend komplexe Vorhersagemodelle auf Basis immer größerer Datensätze zu produzieren. Für das Risikomanagement von Naturgefahren sind eine Vielzahl von Modellen als Entscheidungsgrundlage notwendig, z.B. in der Auswertung von Beobachtungsdaten, für die Vorhersage von Gefahrenszenarien, oder zur statistischen Abschätzung der zu erwartenden Schäden. Es stellt sich also die Frage, inwiefern moderne Modellierungsansätze wie das maschinelle Lernen oder Data-Mining in diesem Themenbereich sinnvoll eingesetzt werden können. Zusätzlich ist im Hinblick auf die Datenverfügbarkeit und -zugänglichkeit ein Trend zur Öffnung (open data) zu beobachten. Thema dieser Arbeit ist daher, die Möglichkeiten und Grenzen des maschinellen Lernens und frei verfügbarer Geodaten auf dem Gebiet der Hochwasserrisikomodellierung im weiteren Sinne zu untersuchen. Da dieses übergeordnete Thema sehr breit ist, werden einzelne relevante Aspekte herausgearbeitet und detailliert betrachtet. Eine prominente Datenquelle im Bereich Hochwasser ist die satellitenbasierte Kartierung von Überflutungsflächen, die z.B. über den Copernicus Service der Europäischen Union frei zur Verfügung gestellt werden. Große Hoffnungen werden in der wissenschaftlichen Literatur in diese Produkte gesetzt, sowohl für die akute Unterstützung der Einsatzkräfte im Katastrophenfall, als auch in der Modellierung mittels hydrodynamischer Modelle oder zur Schadensabschätzung. Daher wurde ein Fokus in dieser Arbeit auf die Untersuchung dieser Flutmasken gelegt. Aus der Beobachtung, dass die Qualität dieser Produkte in bewaldeten und urbanen Gebieten unzureichend ist, wurde ein Verfahren zur nachträglichenVerbesserung mittels maschinellem Lernen entwickelt. Das Verfahren basiert auf einem Klassifikationsalgorithmus der nur Trainingsdaten von einer vorherzusagenden Klasse benötigt, im konkreten Fall also Daten von Überflutungsflächen, nicht jedoch von der negativen Klasse (trockene Gebiete). Die Anwendung für Hurricane Harvey in Houston zeigt großes Potenzial der Methode, abhängig von der Qualität der ursprünglichen Flutmaske. Anschließend wird anhand einer prozessbasierten Modellkette untersucht, welchen Einfluss implementierte physikalische Prozessdetails auf das vorhergesagte statistische Risiko haben. Es wird anschaulich gezeigt, was eine Risikostudie basierend auf etablierten Modellen leisten kann. Solche Modellketten sind allerdings bereits für Flusshochwasser sehr komplex, und für zusammengesetzte oder kaskadierende Ereignisse mit Starkregen, Sturzfluten, und weiteren Prozessen, kaum vorhanden. Im vierten Kapitel dieser Arbeit wird daher getestet, ob maschinelles Lernen auf Basis von vollständigen Schadensdaten einen direkteren Weg zur Schadensmodellierung ermöglicht, der die explizite Konzeption einer solchen Modellkette umgeht. Dazu wird ein staatlich erhobener Datensatz der geschädigten Gebäude während des schweren El Niño Ereignisses 2017 in Peru verwendet. In diesem Kontext werden auch die Möglichkeiten des Data-Mining zur Extraktion von Prozessverständnis ausgelotet. Es kann gezeigt werden, dass diverse frei verfügbare Geodaten nützliche Informationen für die Gefahren- und Schadensmodellierung von komplexen Flutereignissen liefern, z.B. satellitenbasierte Regenmessungen, topographische und hydrographische Information, kartierte Siedlungsflächen, sowie Indikatoren aus Spektraldaten. Zudem zeigen sich Erkenntnisse zu den Schädigungsprozessen, die im Wesentlichen mit den vorherigen Erwartungen in Einklang stehen. Die maximale Regenintensität wirkt beispielsweise in Städten und steilen Schluchten stärker schädigend, während die Niederschlagssumme in tiefliegenden Flussgebieten und bewaldeten Regionen als aussagekräftiger befunden wurde. Ländliche Gebiete in Peru weisen in der präsentierten Studie eine höhere Vulnerabilität als die Stadtgebiete auf. Jedoch werden auch die grundsätzlichen Grenzen der Methodik und die Abhängigkeit von spezifischen Datensätzen and Algorithmen offenkundig. In der übergreifenden Diskussion werden schließlich die verschiedenen Methoden – prozessbasierte Modellierung, prädiktives maschinelles Lernen, und Data-Mining – mit Blick auf die Gesamtfragestellungen evaluiert. Im Bereich der Gefahrenbeobachtung scheint eine Fokussierung auf neue Algorithmen sinnvoll. Im Bereich der Gefahrenmodellierung, insbesondere für Flusshochwasser, wird eher die Verbesserung von physikalischen Modellen, oder die Integration von prozessbasierten und statistischen Verfahren angeraten. In der Schadensmodellierung fehlen nach wie vor die großen repräsentativen Datensätze, die für eine breite Anwendung von maschinellem Lernen Voraussetzung ist. Daher ist die Verbesserung der Datengrundlage im Bereich der Schäden derzeit als wichtiger einzustufen als die Auswahl der Algorithmen. N2 - Technological progress allows for producing ever more complex predictive models on the basis of increasingly big datasets. For risk management of natural hazards, a multitude of models is needed as basis for decision-making, e.g. in the evaluation of observational data, for the prediction of hazard scenarios, or for statistical estimates of expected damage. The question arises, how modern modelling approaches like machine learning or data-mining can be meaningfully deployed in this thematic field. In addition, with respect to data availability and accessibility, the trend is towards open data. Topic of this thesis is therefore to investigate the possibilities and limitations of machine learning and open geospatial data in the field of flood risk modelling in the broad sense. As this overarching topic is broad in scope, individual relevant aspects are identified and inspected in detail. A prominent data source in the flood context is satellite-based mapping of inundated areas, for example made openly available by the Copernicus service of the European Union. Great expectations are directed towards these products in scientific literature, both for acute support of relief forces during emergency response action, and for modelling via hydrodynamic models or for damage estimation. Therefore, a focus of this work was set on evaluating these flood masks. From the observation that the quality of these products is insufficient in forested and built-up areas, a procedure for subsequent improvement via machine learning was developed. This procedure is based on a classification algorithm that only requires training data from a particular class to be predicted, in this specific case data of flooded areas, but not of the negative class (dry areas). The application for hurricane Harvey in Houston shows the high potential of this method, which depends on the quality of the initial flood mask. Next, it is investigated how much the predicted statistical risk from a process-based model chain is dependent on implemented physical process details. Thereby it is demonstrated what a risk study based on established models can deliver. Even for fluvial flooding, such model chains are already quite complex, though, and are hardly available for compound or cascading events comprising torrential rainfall, flash floods, and other processes. In the fourth chapter of this thesis it is therefore tested whether machine learning based on comprehensive damage data can offer a more direct path towards damage modelling, that avoids explicit conception of such a model chain. For that purpose, a state-collected dataset of damaged buildings from the severe El Niño event 2017 in Peru is used. In this context, the possibilities of data-mining for extracting process knowledge are explored as well. It can be shown that various openly available geodata sources contain useful information for flood hazard and damage modelling for complex events, e.g. satellite-based rainfall measurements, topographic and hydrographic information, mapped settlement areas, as well as indicators from spectral data. Further, insights on damaging processes are discovered, which mainly are in line with prior expectations. The maximum intensity of rainfall, for example, acts stronger in cities and steep canyons, while the sum of rain was found more informative in low-lying river catchments and forested areas. Rural areas of Peru exhibited higher vulnerability in the presented study compared to urban areas. However, the general limitations of the methods and the dependence on specific datasets and algorithms also become obvious. In the overarching discussion, the different methods – process-based modelling, predictive machine learning, and data-mining – are evaluated with respect to the overall research questions. In the case of hazard observation it seems that a focus on novel algorithms makes sense for future research. In the subtopic of hazard modelling, especially for river floods, the improvement of physical models and the integration of process-based and statistical procedures is suggested. For damage modelling the large and representative datasets necessary for the broad application of machine learning are still lacking. Therefore, the improvement of the data basis in the field of damage is currently regarded as more important than the selection of algorithms. KW - flood risk KW - machine learning KW - open data KW - damage modelling KW - data-mining KW - Schadensmodellierung KW - Data-Mining KW - Hochwasserrisiko KW - maschinelles Lernen KW - offene Daten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-555943 ER - TY - THES A1 - Chaleawlert-Umpon, Saowaluk T1 - Sustainable electrode materials based on lignin T1 - Ligninbasierte nachhaltige Elektrodenmaterialien N2 - The utilization of lignin as renewable electrode material for electrochemical energy storage is a sustainable approach for future batteries and supercapacitors. The composite electrode was fabricated from Kraft lignin and conductive carbon and the charge storage contribution was determined in terms of electrical double layer (EDL) and redox reactions. The important factors at play for achieving high faradaic charge storage capacity contribute to high surface area, accessibility of redox sites in lignin and their interaction with conductive additives. A thinner layer of lignin covering the high surface area of carbon facilitates the electron transfer process with a shorter pathway from the active sites of nonconductive lignin to the current collector leading to the improvement of faradaic charge storage capacity. Composite electrodes from lignin and carbon would be even more sustainable if the fluorinated binder can be omitted. A new route to fabricate a binder-free composite electrode from Kraft lignin and high surface area carbon has been proposed by crosslinking lignin with glyoxal. A high molecular weight of lignin is obtained to enhance both electroactivity and binder capability in composite electrodes. The order of the processing step of crosslinking lignin on the composite electrode plays a crucial role in achieving a stable electrode and high charge storage capacity. The crosslinked lignin based electrodes are promising since they allow for more stable, sustainable, halogen-free and environmentally benign devices for energy storage applications. Furthermore, improvement of the amount of redox active groups (quinone groups) in lignin is useful to enhance the capacity in lithium battery applications. Direct oxidative demethylation by cerium ammonium nitrate has been carried out under mild conditions. This proves that an increase of quinone groups is able to enhance the performance of lithium battery. Thus, lignin is a promising material and could be a good candidate for application in sustainable energy storage devices. N2 - Die Verwendung von Lignin als erneuerbares Ausgangsmaterial für Elektroden ist ein nachhaltiger Ansatz für die Herstellung der nächsten Generation von Batterien und Superkondensatoren. In dieser Arbeit werden Verbundelektroden auf der Basis von Kraft-Lignin und leitfähigem Kohlenstoff hergestellt und getestet. Die Beiträge des Aufbaus einer elektrischen Doppelschicht (EDL) und der Redoxreaktionen zur Kapazität der Elektrode werden diskutiert. Die wichtigsten Faktoren um eine hohe faradaysche Kapazität der aktiven Gruppen in Lignin zu erreichen sind eine große Oberfläche, die Zugänglichkeit der redoxaktiven Gruppen, sowie die Wechselwirkung mit leitfähigen Additiven. Dabei verringert eine dünnere Ligninschicht auf der Oberfläche des leitfähigen Kohlenstoffs den Elektronentransportweg zwischen den redoxaktiven Gruppen und dem Stromabnehmer und wirkt sich somit positiv auf die faradaysche Kapazität aus. Traditionelle Verbundelektroden enthalten in der Regel fluorierte Bindemittel, was deren Nachhaltigkeit in Frage stellt. Die Verwendung von Glyoxal als Quervernetzer für Lignin stellt eine Alternative zur Herstellung von bindemittelfreien ligninbasierten Verbundelektroden dar. Durch die Quervernetzung wird Lignin mit hohem Molekulargewicht erhalten, was sich insbesondere vorteilhaft auf die Stabilität der Elektroden auswirkt. Für das Erreichen einer hohen Kapazität spielt allerdings die Reihenfolge der Produktionsschritte eine entscheidende Rolle, was hier auch diskutiert wird. Eine Erhöhung der Anzahl an redoxativen Gruppen, insbesondere Chinon-Funktionalitäten, im Lignin führt darüber hinaus zur Erhöhung der Kapazität in primären Lithiumbatterien. Die direkte oxidative Demethylierung von Phenylethern mit Hilfe von Cerammoniumnitrat wurde in dieser Arbeit unter milden Reaktionsbedingungen durchgeführt und die verbesserte Kapazität in Lithiumbatterien aufgrund der erhöhten Anzahl an redoxaktiven Gruppen aufgezeigt. Abschließend kann Lignin, quervernetzt oder oxidiert, als vielversprechender Wegbereiter für nachhaltige Materialen in der Energiespeicherung angesehen werden. KW - lignin KW - energy storage KW - sustainable energy storage materials KW - Lignin KW - Energiespeicher KW - nachhaltige Energiespeichermaterialien Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411793 ER - TY - THES A1 - Codutti, Agnese T1 - Behavior of magnetic microswimmers T1 - Verhalten magnetischer Microschwimmer BT - simulations for natural swimmers and synthetic propellers BT - Simulationen von natürlichen Schwimmern und synthetischen Propellern N2 - Microswimmers, i.e. swimmers of micron size experiencing low Reynolds numbers, have received a great deal of attention in the last years, since many applications are envisioned in medicine and bioremediation. A promising field is the one of magnetic swimmers, since magnetism is biocom-patible and could be used to direct or actuate the swimmers. This thesis studies two examples of magnetic microswimmers from a physics point of view. The first system to be studied are magnetic cells, which can be magnetic biohybrids (a swimming cell coupled with a magnetic synthetic component) or magnetotactic bacteria (naturally occurring bacteria that produce an intracellular chain of magnetic crystals). A magnetic cell can passively interact with external magnetic fields, which can be used for direction. The aim of the thesis is to understand how magnetic cells couple this magnetic interaction to their swimming strategies, mainly how they combine it with chemotaxis (the ability to sense external gradient of chemical species and to bias their walk on these gradients). In particular, one open question addresses the advantage given by these magnetic interactions for the magnetotactic bacteria in a natural environment, such as porous sediments. In the thesis, a modified Active Brownian Particle model is used to perform simulations and to reproduce experimental data for different systems such as bacteria swimming in the bulk, in a capillary or in confined geometries. I will show that magnetic fields speed up chemotaxis under special conditions, depending on parameters such as their swimming strategy (run-and-tumble or run-and-reverse), aerotactic strategy (axial or polar), and magnetic fields (intensities and orientations), but it can also hinder bacterial chemotaxis depending on the system. The second example of magnetic microswimmer are rigid magnetic propellers such as helices or random-shaped propellers. These propellers are actuated and directed by an external rotating magnetic field. One open question is how shape and magnetic properties influence the propeller behavior; the goal of this research field is to design the best propeller for a given situation. The aim of the thesis is to propose a simulation method to reproduce the behavior of experimentally-realized propellers and to determine their magnetic properties. The hydrodynamic simulations are based on the use of the mobility matrix. As main result, I propose a method to match the experimental data, while showing that not only shape but also the magnetic properties influence the propellers swimming characteristics. N2 - Die Forschung an Mikroschwimmern oder genauer gesagt an aktiv schwimmenden Mikroorganismen oder Objekten mit niedrigen Reynolds Zahlen, hat in den letzten Jahren wegen ihrer vielfältigen Anwendungen in der Medizin und Bioremediation stark an Bedeutung gewonnen. Besonders vielversprechend ist die Arbeit mit magnetischen Mikroschwimmern, da deren biokompatibler Magnetismus genutzt werden kann um die Schwimmer gezielt zu steuern. In dieser Arbeit werden zwei Beispiele von magnetischen Mikroschwimmern aus physikalischer Sicht untersucht. Das erste Modellsystem hierfür sind magnetische Zellen. Diese können entweder magnetische Biohybride (eine schwimm-Zelle gekoppelt mit einer synthetischen magnetischen Komponente) oder magnetotaktische Bakterien (natürlich vorkommende Bakterien die eine intrazelluläre Kette von magnetischen Kristallen produzieren) sein. Die passive Wechselwirkung der magnetischen Zelle mit einem externen Magnetfeld kann zu deren Steuerung genutzt werden. Das Ziel dieser Arbeit ist es zu verstehen wie magnetische Zellen die magnetische Wechselwirkung mit ihre Schwimmstrategie verknüpfen, oder genauer gesagt, wie sie sie zur Chemotaxis (die Fähigkeit externe chemische Gradienten wahrzunehmen und die Fortbewegungsrichtung daran anzupassen) zu nutzen. Es ist immer noch nicht restlos geklärt worin in der natürlichen Umgebung der magnetischen Bakterien, wie beispielsweise in porösem Sediment, der Vorteil der Wechselwirkung mit dem externen magnetischen Feld liegt. In dieser Arbeit wurde ein modifiziertes „Active Brownian Particle model“ verwendet um mittels Computersimulationen experimentelle Ergebnisse an Bakterien zu reproduzieren, die sich frei, in einer Glaskapillare, oder in anders begrenzten Geometrien bewegen. Ich werde zeigen, dass abhängig von der Schwimmstrategie („run-and-tumble“ oder „runand-reverse“), aerotaktische Strategie (axial oder polar), und der Feldintensität und Orientierung, das magnetische Feld Chemotaxis beschleunigen kann. Abhängig von dem gewählten Modellsystem kann es jedoch auch zu einer Behinderung der Chemotaxis kommen. Das zweite Beispiel für magnetische Mikroschwimmer sind starre (z.B. Helices) oder zufällig geformte magnetische Propeller. Sie werden durch ein externes magnetisches Feld angetrieben und gelenkt. Hierbei stellt sich die Frage wie die Form der Propeller deren Verhalten beeinflusst und wie sie für eine bestimmte Anwendung optimiert werden können. Daher ist es das Ziel dieser Arbeit Simulationsmethoden vorzuschlagen um das experimentell beobachtete Verhalten zu reproduzieren und die magnetischen Eigenschaften der Propeller zu beschreiben. Hierfür wird die Mobilitätsmatrix verwendet um die hydrodynamischen Simulationen zu realisieren. Ein Hauptresultat meiner Arbeit ist eine neue Methode, welche die Simulationen in Einklang mit den experimentellen Resultaten bringt. Hierbei zeigt sich, dass nicht nur die Form sondern insbesondere auch die magnetischen Eigenschaften die Schwimmcharakteristik der Propeller entscheidend beeinflussen. KW - microswimmers KW - magnetism KW - bacteria KW - propellers KW - simulation KW - Microschwimmer KW - Magnetismus KW - Bakterien KW - Propeller KW - Simulationen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-422976 ER - TY - THES A1 - Cruz Lemus, Saul Daniel T1 - Enhancing Efficiency of Inverted Perovskite Solar Cells BT - Employing Carbon Nitride and Poly (Ionic -Liquid)s as Interlayers N2 - Carbon nitride and poly(ionic liquid)s (PILs) have been successfully applied in various fields of materials science owing to their outstanding properties. This thesis aims at the successful application of these polymers as innovative materials in the interfaces of hybrid organic–inorganic perovskite solar cells. A critical problem in harnessing the full thermodynamic potential of halide perovskites in solar cells is the design and modification of interfaces to reduce carrier recombination. Therefore, the interface must be properly studied and improved. This work investigated the effect of applying carbon nitride and PILs on a perovskite surface on the device performance. The facile synthetic method for modifying carbon nitride with vinyl thiazole and barbituric acid (CMB-vTA) yields 2.3 nm layers when solution processing is performed using isopropanol. The nanosheets were applied as a metal-free electron transport layer in inverted perovskite solar cells. The application of carbon nitride layers (CMB-vTA) resulted in negligible current-voltage hysteresis with a high open circuit voltage (Voc) of 1.1 V and a short-circuit current (Jsc) of 20.28 mA cm-2, which afforded efficiencies of up to 17%. Thus, the successful implementation of a carbon nitride-based structure enabled good charge extraction with minimized interface recombination between the perovskite and PCBM. Similarly, PILs represent a new strategy of interfacial modification using an ionic polymer in an n-i-p perovskite architecture.. The application of PILs as an interfacial modifier resulted in solar cell devices with an extraordinarily high efficiency of 21.8% and a Voc of 1.17 V. The implementation reduced non-radiative recombination at the perovskite surface through defect passivation. Finally, our work proposes a novel method to efficiently suppress non-radiative charge recombination using the unexplored properties of carbon nitride and PILs in the solar cell field. Additionally, the method for interfacial modification has general applicability because of the simplicity of the post-treatment approach, and therefore has potential applicability in other solar cells. Thus, this work opens the door to a new class of materials to be implemented. Y1 - 2020 ER - TY - THES A1 - De Andrade Queiroz, Anna Barbara T1 - The Milky Way disks, bulge, and bar sub-populations T1 - Die Scheiben, der Bulge und der Balken der Milchstraße Subpopulationen BT - a chemo-dynamical view of our Galaxy in the APOGEE + Gaia era BT - ein chemodynamischer Blick auf unsere Galaxie in der APOGEE + Gaia Ära N2 - In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology. At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates. We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood. We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages. With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation. N2 - In den letzten Jahrzehnten hat die Astronomie mit großen galaktischen Durchmusterungen einen Boom erlebt. Die dadurch gewonnenen detaillierten Informationen über Millionen von Einzelsternen in der Milchstraße bringen uns der Beantwortung einer der wichtigsten Fragen der Astrophysik einen Schritt näher: Wie entstehen und entwickeln sich Galaxien? Die Milchstraße ist die einzige Galaxie, in der wir viele Sterne in ihre hochdimensionale chemische Zusammensetzung und ihren vollständigen Phasenraum zerlegen können, was analog zu fossilen Aufzeichnungen die Entstehungsgeschichte der Galaxie enthüllen kann. Für kosmologische Modelle ist es von entscheidender Bedeutung, die Prozesse zu verstehen, die zur Bildung großer Strukturen wie der Milchstraße führen; wir nennen diese Studienrichtung Galaktische Archäologie oder Nahfeldkosmologie. Im Mittelpunkt dieser Arbeit stehen die Bemühungen, die Scheiben und den Bulge unserer Galaxie chemisch und dynamisch zu charakterisieren. Die Ergebnisse, die wir in dieser Arbeit vorstellen, waren nur dank des starts des astrometrischen Satelliten Gaia möglich, der das Gebiet der galaktischen Archäologie durch die präzise Messung der Positionen, Parallaxenwinkel und Eigenbewegungen von mehr als einer Milliarde Sterne revolutioniert hat. Ein weiterer, aber nicht minder wichtiger Durchbruch ist die APOGEE-Durchmusterung, die Spektren im nahen Infrarot beobachtet hat, was es uns erlaubt, durch die staubigen Regionen der Milchstraße hindurchzublicken und die chemischen Fingerabdrücke von Hunderttausenden von Sternen zu bestimmen. Um die Struktur der Milchstraße genau darzustellen, verwenden und entwickeln wir das Isochrone-fitting-Tool StarHorse; diese Software kann Sternentfernungen, Aussterbezeiten und Alter vorhersagen, indem sie Astrometrie, Photometrie und Spektroskopie auf der Grundlage von Modellen der Sternentwicklung kombiniert. Der Code StarHorse ist von zentraler Bedeutung für die Berechnung von Entfernungen, bei denen Gaia -Parallaxen allein keine Bestimmung ermöglichen. Wir zeigen, dass wir durch die Kombination von Gaia, APOGEE und StarHorse eine chemische Kartographie der Milchstraßenscheiben von ihrem äußersten bis zum innersten Teil erstellen können. Eine solche Karte ist in der inneren Galaxis beispiellos und zeigt ein bimodales chemisches Muster, das auf zwei Populationen mit unterschiedlichen Entstehungsgeschichten hinweist. Darüber hinaus bestätigen die Daten einen chemischen Gradienten innerhalb der dünnen Scheibe, bei dem der Gehalt an Elementen und Metallen aus 𝛼-Prozessen zum Zentrum hin zunimmt ist. Eine Überdichte in der Anzahl der Sterne bestätigt zudem die Signatur eines Balkens in der inneren Galaxie. Modelle der Galaxienentstehung sagen gewöhnlich deren Beginn im galaktischen Zentrum voraus. Wir konzentrieren uns auf eine Stichprobe in der inneren Galaxie und erwarten, dass wir primordiale stellare Populationen finden. Wir bestätigen die chemische Bimodalität der inneren Galaxie und dass der galaktische Balken sowohl aus Sternen mit hohem als auch mit niedrigem 𝛼 besteht, was darauf hindeutet, dass sich der Balken durch säkulare Evolution gebildet hat, bei der bereits existierende Sterne eingefangen wurden. Durch die Analyse des chemischen Orbitalraums der inneren galaktischen Regionen können wir die verschiedenen Populationen, die diese komplexe Region bewohnen, unterscheiden. Wir zeigen das Vorhandensein einer dünnen Scheibe, einer dicken Scheibe, eines Balkens und einer gegenläufig rotierenden Population, die dem Ergebnis einer gestörten proto-galaktischen Scheibe ähnelt. Unsere Studie zeigt auch, dass die innere Galaxie eine große Menge an supermetallreichen Sternen enthält, die bis zum Dreifachen der solaren Metallizität reichen. Möglicherweise handelt es sich bei der Gruppe alter supermetallreicher Sterne, die in der Sonnenumgebung gefunden wurden um Kandidaten für Migranten aus den innersten Regionen. Wir befassen uns auch mit der komplizierten Aufgabe der Bestimmung individueller Sternalter. Mit StarHorse berechnen wir das Alter von Hauptreihenabzweig- und Unterriesensternen für mehrere öffentliche spektroskopische Durchmusterungen. Wir validieren unsere Ergebnisse, indem wir lineare Abhängigkeiten zwischen den chemischen Häufigkeiten und der Zeit untersuchen, da die 𝛼- und Neutroneneinfang-Elemente empfindlich auf das Alter reagieren, was auf die unterschiedlichen Zeitskalen der Anreicherung dieser Elemente zurückzuführen ist. Zur weiteren Untersuchung der Scheiben in der Sonnenumgebung verwenden wir einen nicht überwachten Algorithmus für maschinelles Lernen, um eine mehrdimensionale Trennung der chrono-chemischen Sterngruppen vorzunehmen. Dies macht die chemisch dicke Scheibe, die dünne Scheibe und junge 𝛼 Sterne erkennbar. Es zeigt sich, dass die dicke Scheibe eine geringe Altersstreuung aufweist, was auf ihre schnelle Entstehung hindeutet, während die dünne Scheibe eine große Altersspanne abdeckt. Mit bahnbrechenden Daten liefert diese Arbeit ein detailliertes chemodynamisches Bild der Scheibe und des Bulge der Galaxis. Unsere Erkenntnisse über die Milchstraße können mit der Entwicklung von Scheibengalaxien mit hoher Rotverschiebung in Verbindung gebracht werden und so zur Lösung des Rätsels der Galaxienbildung beitragen. KW - stars: distances KW - fundamental parameters KW - statistics KW - galaxy: general KW - disc KW - bulge KW - stellar content KW - Bulge KW - Scheibe KW - fundamentale Parameter KW - Galaxie: allgemein KW - Sterne: Entfernungen KW - Statistik KW - stellarer Inhalt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590615 ER - TY - THES A1 - Demircioglu, Aydin T1 - Reconstruction of deligne classes and cocycles T1 - Rekonstruktion von Deligne Klassen und Kozykeln N2 - In der vorliegenden Arbeit verallgemeinern wir im Wesentlichen zwei Theoreme von Mackaay-Picken und Picken (2002, 2004). Im ihrem Artikel zeigen Mackaay und Picken,dass es eine bijektive Korrespodenz zwischen Deligne 2-Klassen $\xi \in \check{H}^2(M, \mathcal{D}^2)$ und Holonomie Abbildungen von der zweiten dünnen Homotopiegruppe $\pi_2^2(M)$ in die abelsche Gruppe $U(1)$ gibt. Im zweiten Artikel wird eine Verallgemeinerung dieses Theorems bewiesen: Picken zeigt, dass es eine Bijektion gibt zwischen Deligne 2-Kozykeln und gewissen 2-dimensionalen topologischen Quantenfeldtheorien. In dieser Arbeit zeigen wir, dass diese beiden Theoreme in allen Dimensionen gelten.Wir betrachten zunächst den Holonomie Fall und können mittels simplizialen Methoden nachweisen, dass die Gruppe der glatten Deligne $d$-Klassen isomorph ist zu der Gruppe der glatten Holonomie Abbildungen von der $d$-ten dünnen Homotopiegruppe $\pi_d^d(M)$ nach $U(1)$, sofern $M$ eine $(d-1)$-zusammenhängende Mannigfaltigkeit ist. Wir vergleichen dieses Resultat mit einem Satz von Gajer (1999). Gajer zeigte, dass jede Deligne $d$-Klasse durch eine andere Klasse von Holonomie-Abbildungen rekonstruiert werden kann, die aber nicht nur Holonomien entlang von Sphären, sondern auch entlang von allgemeinen $d$-Mannigfaltigkeiten in $M$ enthält. Dieser Zugang benötigt dann aber nicht, dass $M$ hoch-zusammenhängend ist. Wir zeigen, dass im Falle von flachen Deligne $d$-Klassen unser Rekonstruktionstheorem sich von Gajers unterscheidet, sofern $M$ nicht als $(d-1)$, sondern nur als $(d-2)$-zusammenhängend angenommen wird. Stiefel Mannigfaltigkeiten besitzen genau diese Eigenschaft, und wendet man unser Theorem auf diese an und vergleicht das Resultat mit dem von Gajer, so zeigt sich, dass es zuviele Deligne Klassen rekonstruiert. Dies bedeutet, dass unser Rekonstruktionsthreorem ohne die Zusatzbedingungen an die Mannigfaltigkeit M nicht auskommt, d.h. unsere Rekonstruktion benötigt zwar weniger Informationen über die Holonomie entlang von d-dimensionalen Mannigfaltigkeiten, aber dafür muss M auch $(d-1)$-zusammenhängend angenommen werden. Wir zeigen dann, dass auch das zweite Theorem verallgemeinert werden kann: Indem wir das Konzept einer Picken topologischen Quantenfeldtheorie in beliebigen Dimensionen einführen, können wir nachweisen, dass jeder Deligne $d$-Kozykel eine solche $d$-dimensionale Feldtheorie mit zwei besonderen Eigenschaften, der dünnen Invarianz und der Glattheit, induziert. Wir beweisen, dass jede $d$-dimensionale topologische Quantenfeldtheorie nach Picken mit diesen zwei Eigenschaften auch eine Deligne $d$-Klasse definiert und prüfen nach, dass diese Konstruktion sowohl surjektiv als auch injektiv ist. Demzufolge sind beide Gruppen isomorph. N2 - In this thesis we mainly generalize two theorems from Mackaay-Picken and Picken (2002, 2004). In the first paper, Mackaay and Picken show that there is a bijective correspondence between Deligne 2-classes $\xi \in \check{H}^2(M,\mathcal{D}^2)$ and holonomy maps from the second thin-homotopy group $\pi_2^2(M)$ to $U(1)$. In the second one, a generalization of this theorem to manifolds with boundaries is given: Picken shows that there is a bijection between Deligne 2-cocycles and a certain variant of 2-dimensional topological quantum field theories. In this thesis we show that these two theorems hold in every dimension. We consider first the holonomy case, and by using simplicial methods we can prove that the group of smooth Deligne $d$-classes is isomorphic to the group of smooth holonomy maps from the $d^{th}$ thin-homotopy group $\pi_d^d(M)$ to $U(1)$, if $M$ is $(d-1)$-connected. We contrast this with a result of Gajer (1999). Gajer showed that Deligne $d$-classes can be reconstructed by a different class of holonomy maps, which not only include holonomies along spheres, but also along general $d$-manifolds in $M$. This approach does not require the manifold $M$ to be $(d-1)$-connected. We show that in the case of flat Deligne $d$-classes, our result differs from Gajers, if $M$ is not $(d-1)$-connected, but only $(d-2)$-connected. Stiefel manifolds do have this property, and if one applies our theorem to these and compare the result with that of Gajers theorem, it is revealed that our theorem reconstructs too many Deligne classes. This means, that our reconstruction theorem cannot live without the extra assumption on the manifold $M$, that is our reconstruction needs less informations about the holonomy of $d$-manifolds in $M$ at the price of assuming $M$ to be $(d-1)$-connected. We continue to show, that also the second theorem can be generalized: By introducing the concept of Picken-type topological quantum field theory in arbitrary dimensions, we can show that every Deligne $d$-cocycle induces such a $d$-dimensional field theory with two special properties, namely thin-invariance and smoothness. We show that any $d$-dimensional topological quantum field theory with these two properties gives rise to a Deligne $d$-cocycle and verify that this construction is surjective and injective, that is both groups are isomorphic. KW - Holonomie KW - Hauptfaserbündel KW - Gerben KW - Deligne Kohomologie KW - Globale Differentialgeometrie KW - Holonomy KW - Prinicipal Fibre Bundles KW - Gerbes KW - Deligne Cohomology KW - Global Differentialgeometry Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13755 ER - TY - THES A1 - Djalali, Saveh Arman T1 - Multiresponsive complex emulsions: Concepts for the design of active and adaptive liquid colloidal systems T1 - Multiresponsive komplexe Emulsionen: Konzepte für das Design von aktiven und adaptiven flüssig-kolloidalen Systemen N2 - Complex emulsions are dispersions of kinetically stabilized multiphasic emulsion droplets comprised of two or more immiscible liquids that provide a novel material platform for the generation of active and dynamic soft materials. In recent years, the intrinsic reconfigurable morphological behavior of complex emulsions, which can be attributed to the unique force equilibrium between the interfacial tensions acting at the various interfaces, has become of fundamental and applied interest. As such, particularly biphasic Janus droplets have been investigated as structural templates for the generation of anisotropic precision objects, dynamic optical elements or as transducers and signal amplifiers in chemo- and bio-sensing applications. In the present thesis, switchable internal morphological responses of complex droplets triggered by stimuli-induced alterations of the balance of interfacial tensions have been explored as a universal building block for the design of multiresponsive, active, and adaptive liquid colloidal systems. A series of underlying principles and mechanisms that influence the equilibrium of interfacial tensions have been uncovered, which allowed the targeted design of emulsion bodies that can alter their shape, bind and roll on surfaces, or change their geometrical shape in response to chemical stimuli. Consequently, combinations of the unique triggerable behavior of Janus droplets with designer surfactants, such as a stimuli-responsive photosurfactant (AzoTAB) resulted for instance in shape-changing soft colloids that exhibited a jellyfish inspired buoyant motion behavior, holding great promise for the design of biological inspired active material architectures and transformable soft robotics. In situ observations of spherical Janus emulsion droplets using a customized side-view microscopic imaging setup with accompanying pendant dropt measurements disclosed the sensitivity regime of the unique chemical-morphological coupling inside complex emulsions and enabled the recording of calibration curves for the extraction of critical parameters of surfactant effectiveness. The deduced new "responsive drop" method permitted a convenient and cost-efficient quantification and comparison of the critical micelle concentrations (CMCs) and effectiveness of various cationic, anionic, and nonionic surfactants. Moreover, the method allowed insightful characterization of stimuli-responsive surfactants and monitoring of the impact of inorganic salts on the CMC and surfactant effectiveness of ionic and nonionic surfactants. Droplet functionalization with synthetic crown ether surfactants yielded a synthetically minimal material platform capable of autonomous and reversible adaptation to its chemical environment through different supramolecular host-guest recognition events. Addition of metal or ammonium salts resulted in the uptake of the resulting hydrophobic complexes to the hydrocarbon hemisphere, whereas addition of hydrophilic ammonium compounds such as amino acids or polypeptides resulted in supramolecular assemblies at the hydrocarbon-water interface of the droplets. The multiresponsive material platform enabled interfacial complexation and thus triggered responses of the droplets to a variety of chemical triggers including metal ions, ammonium compounds, amino acids, antibodies, carbohydrates as well as amino-functionalized solid surfaces. In the final chapter, the first documented optical logic gates and combinatorial logic circuits based on complex emulsions are presented. More specifically, the unique reconfigurable and multiresponsive properties of complex emulsions were exploited to realize droplet-based logic gates of varying complexity using different stimuli-responsive surfactants in combination with diverse readout methods. In summary, different designs for multiresponsive, active, and adaptive liquid colloidal systems were presented and investigated, enabling the design of novel transformative chemo-intelligent soft material platforms. N2 - Komplexe Emulsionen sind Dispersionen kinetisch stabilisierter mehrphasiger Emulsionströpfchen, die aus zwei oder mehreren nicht mischbaren Flüssigkeiten bestehen und eine neuartige Materialplattform für die Herstellung aktiver und dynamischer weicher Materialien darstellen. In den letzten Jahren haben komplexe Emulsionen aufgrund ihres intrinsisch rekonfigurierbaren morphologischen Verhaltens, dass auf ein einzigartiges Kräftegleichgewicht zwischen den an den verschiedenen Grenzflächen wirkenden Grenzflächenspannungen zurückzuführen ist, zunehmendes wissenschaftliches Interesse erfahren. So wurden insbesondere zweiphasige Janus-Tropfen als strukturelle Vorlagen für die Erzeugung anisotroper Präzisionsobjekte, dynamischer optischer Elemente oder als Wandler und Signalverstärker in Chemo- und Bio-Sensorik-Anwendungen untersucht. In der vorliegenden Arbeit wurden schaltbare interne morphologische Veränderungen komplexer Tröpfchen erforscht, die durch Stimulus-induzierte Verschiebungen des Grenzflächenspannungsgleichgewichts ausgelöst werden. Diese können als universelle Bausteine für das Design multiresponsiver, aktiver und adaptiver flüssiger kolloidaler Systeme dienen. Es wurde eine Reihe von grundlegenden Prinzipien und Mechanismen zur Beeinflussung des Grenzflächenspannungsgleichgewichtes erforscht, die die gezielte Entwicklung von formverändernden, sich an Oberflächen bindenden und in Reaktion auf chemische Stimuli verändernden Emulsionskörpern ermöglicht. Die Kombination des einzigartigen responsiven Verhaltens von Janus-Tropfen mit maßgeschneiderten Tensiden erlaubt die Erschließung von biologisch inspirierten aktiven Materialarchitekturen. So führte beispielsweise die Funktionalisierung von Janus-Tropfen mit einem photo-responsiven Tensid (AzoTAB) zu formverändernden weichen Kolloiden, die ein von Quallen inspiriertes Schwimmverhalten zeigten und damit vielversprechend für die Anwendung im Forschungsfeld der transformierbaren „soft-robotics“ sind. Die In-situ-Beobachtung von sphärischen Janus-Emulsionströpfchen mit einem Seitenansichts-Mikroskop und begleitenden Pendant-Drop-Messungen ermöglichten es das Empfindlichkeitsregime der einzigartigen chemisch-morphologischen Kopplung innerhalb komplexer Emulsionen offenzulegen. Die resultierende Kalibrierungskurve erlaubt die Extraktion von kritischen Parametern der Tensidwirksamkeit. Die daraus abgeleitete neue "responsive drop"-Methode ermöglicht eine einfache, kosteneffiziente Quantifizierung der kritischen Mizellenkonzentrationen (CMCs) und einen Vergleich der Wirksamkeit verschiedener kationischer, anionischer und nichtionischer Tenside. Darüber hinaus ermöglichte die Methode eine aufschlussreiche Charakterisierung Stimuli-responsiver Tenside und die Überwachung des Einflusses anorganischer Salze auf die CMC und die Tensidwirksamkeit ionischer und nichtionischer Tenside. Die Funktionalisierung von Tröpfchen mit synthetischen Kronenether-Tensiden führte zu einer synthetisch minimalen Materialplattform, die in der Lage ist, sich durch verschiedene supramolekulare Wirts-Gast-Erkennungsereignisse selbständig und reversibel an ihre chemische Umgebung anzupassen. Die Zugabe von Metall- oder Ammoniumsalzen hatte eine Aufnahme der resultierenden hydrophoben Komplexe in die Kohlenwasserstoff-Hemisphäre zur Folge, während die Zugabe von hydrophilen Ammoniumverbindungen wie Aminosäuren oder Polypeptiden zu supramolekularen Assemblierungen an der Kohlenwasserstoff-Wasser-Grenzfläche der Tröpfchen führte. Die multiresponsive Materialplattform ermöglicht die Grenzflächenkomplexierung und damit die morphologische Reaktion der Tröpfchen auf eine Vielzahl von chemischen Triggern, darunter Metallionen, Ammoniumverbindungen, Aminosäuren, Antikörper, Kohlenhydrate sowie aminofunktionalisierte feste Oberflächen. Im letzten Kapitel werden die ersten dokumentierten optischen Logikgatter und kombinatorischen Logikschaltungen auf der Grundlage von komplexen Emulsionen vorgestellt. Zur Realisierung von Tropfen-basierten Logikgattern unterschiedlicher Komplexität wurden die einzigartigen rekonfigurierbaren und multiresponsiven Eigenschaften komplexer Emulsionen ausgenutzt. Dabei wurden Stimuli-responsive Tenside in Kombination mit unterschiedlichen Auslesemethoden verwendet. Zusammenfassend wurden verschiedene Designs für multiresponsive, aktive und adaptive flüssige kolloidale Systeme vorgestellt und untersucht, die die Entwicklung neuartiger chemo-intelligenter weicher Materialplattformen ermöglichen. KW - complex emulsion KW - emulsion KW - multiresponsive KW - komplexe Emulsion KW - Emulsion KW - multiresponsiv Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-575203 ER - TY - THES A1 - Drobyshev, Evgenii T1 - Toxic or beneficial? What is the role of food-relevant selenium species selenoneine? T1 - Giftig oder nützlich? Welche Rolle spielt die lebensmittelrelevante Selenspezies Selenonein? N2 - Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present. The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine. Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells. In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter – OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation. As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation. Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant. N2 - Selen (Se) ist ein essentielles Spurenelement, das in geringen Konzentrationen ubiquitär in der Umwelt vorkommt. Essentielle Funktionen von Se im menschlichen Körper manifestieren sich in einer Vielzahl von Proteinen, die Selenocystein als aktives Zentrum enthalten. Solche Proteine werden Selenoproteine genannt, die in zahlreichen physiologischen Prozessen wie der antioxidativen Abwehr und der Regulierung der Schilddrüsenhormonfunktionen vorkommen. Daher ist bekannt, dass ein Se-Mangel ein breites Spektrum physiologischer Beeinträchtigungen verursacht, insbesondere in solchen Regionen mit niedrigem Se-Bodengahlten. Dennoch kann Se als essentielles Spurenelement auch toxische Wirkungen entfalten, wenn seine Aufnahme das tolerierbare Maß überschreitet. Dementsprechend stellt dieser Bereich zwischen Mangel und Überbelichtung eine optimale Se-Versorgung dar. Dieser Bereich erwies sich jedoch als enger als bei jedem anderen essentiellen Spurenelement. Zusammen mit stark schwankenden SeKonzentrationen im Boden und dem Vorliegen spezifischer Bioakkumulationsfaktoren stellt dies eine deutliche Schwierigkeit bei der Beurteilung des epidemiologischen Selenstatus dar. Während im Körper mehrere Selenoproteine vorliegen, erfolgt seine Aufnahme hauptsächlich in Form kleiner organischer oder anorganischer Moleküle. Somit hängt die Se-Exposition nicht nur von der täglichen Aufnahme ab, sondern auch von der jeweiligen chemischen Form, in der es vorliegt. Die essentiellen Funktionen von Selen sind seit langem bekannt und seine Primärformen in verschiedenen Nahrungsquellen dominierenden Formen wurden bereits gut beschrieben. Dennoch wurden erst in den letzten Jahrzehnten neue analytische Möglichkeiten für eine umfassendere Untersuchung von Se-Spezies und ihren Derivaten entwickelt. Beispielsweise wurde 2010 eine neue Se-Verbindung im Blut und im Gewebe von Rotem Thunfisch identifiziert. Es wurde Selenonein (SeN) genannt, da es ein Isolog des natürlich vorkommenden Antioxidans Ergothionein (ET) ist, bei dem Se durch Schwefel ersetzt ist. In den folgenden Jahren wurde SeN in einer Reihe von essbaren Fischarten identifiziert und erregte einerseits als neue Nahrungsquelle für Se und andererseits als potenziell starkes Antioxidans Aufmerksamkeit. Studien an Probanden, deren Ernährung hauptsächlich von Fisch geprägt ist, haben gezeigt, dass SeN den hauptsächlichen nicht-proteingebundenen Se-Pool in ihrem Blut darstellt. Erste Studien mit angereicherten Fischextrakten zeigten bereits das hohe antioxidative Potenzial von SeN und seine mögliche Funktion bei der Entgiftung von Methylquecksilber im Fisch. Zellkulturstudien zeigten, dass SeN den gleichen Transporter wie Ergothionein nutzen kann und ein weiterer SeN-Metabolit wurde im menschlichen Urin gefunden. Bis vor kurzem waren Studien zu den Eigenschaften von SeN aufgrund fehlender Möglichkeiten, die reine Verbindung zu erwerben, stark eingeschränkt. Als wichtige Grundlage für die vorliegende Arbeit diente zunächst die erfolgreiche Synthese des SeN, welche an der Universität Graz unter Verwendung gentechnisch veränderter Hefen erfolgte. In der aktuellen Studie wurde unter Verwendung von HepG2-Leberkarzinomzellen gezeigt, dass SeN in physiologisch relevanten Konzentrationen keine toxischen Effekte in diesen Hepatozyten induziert. Bioverfügbarkeitsexperimente zeigten, dass SeN für die verwendeten Leberzellen nicht bioverfügbar ist. Im nächsten Teil wurde ein Modell der Blut-Hirn-Schranke (BHS) verwendet, das auf kapillaren Endothelzellen aus dem Schweinehirn basiert, um den möglichen Transfer von SeN in das zentrale Nervensystem (ZNS) zu untersuchen. Die Bewertung von Toxizitätsmarkern in diesen Endothelzellen und die online Überwachung der Barriere-Bedingungen während der Transferexperimente zeigten, dass bei physiologisch relevanten Konzentrationen keine toxischen Wirkungen von SeN auf das BHS-Endothel auftreten. Daten bezüglich des Übergangs der Selenspezies SeN zeigten zwar eine langsame, jedoch eine nicht zu vernachlässigenden Menge, die die Barriere passieren kann. Die gleichzeitige Inkubation von SeN auf beiden Barriere-Seiten verursachte keinen seitenspezifischen Transfer von SeN, was auf einen passiven Diffusionsmechanismus von SeN über die BHS hindeutet. Diese Daten stimmen mit Tierstudien überein, in denen eine ET-Akkumulation im Rattengehirn beobachtet wurde, obwohl die BHS der Ratte nicht über den primären ET-Transporter – OCTN1 – verfügt. Die Untersuchung von Monolayern aus kapillaren Endothelzellen nach Inkubation mit SeN und Referenzselenverbindungen zeigte keinen signifikanten Anstieg der intrazellulären Selenkonzentration. Speziesspezifische Se-Messungen in Mediumproben aus den apikalen und basolateralen Kompartimenten, sowie in den Zelllysaten zeigten keine SeN-Metabolisierung. Daraus kann geschlossen werden, dass SeN das Gehirn ohne signifikante Transformation erreichen kann. Als dritter Teil dieser Arbeit wurde die Bewertung der antioxidativen Eigenschaften von SeN in menschlichen Caco-2, also kolorektale Adenokarzinomzellen, durchgeführt. Frühere Studien zeigten, dass das Darmepithel in der Lage ist, SeN aktiv vom Darmlumen zur Blutseite zu transportieren und dort SeN anzureichern. Weitere Untersuchungen im Rahmen der aktuellen Arbeiten zeigten ein viel höheres antioxidatives Potenzial von SeN im Vergleich zu ET. Die Aktivität als Radikalfänger nach Inkubation mit SeN war ähnlich wie bei Selenit und Selenomethionin. Wobei die Wirkung von SeN auf die Lebensfähigkeit von Darmzellen unter oxidativen Bedingungen jedoch ähnlich der durch ET verursachten war. Um die Frage zu beantworten, ob SeN als diätetische Se-Quelle verwendet werden kann um die Aktivität von Selenoproteinen zu induzieren, wurden zusätzlich die Aktivität der Glutathionperoxidase (GPx) und die Sekretion von Selenoprotein P (SelenoP) in Caco-2-Zellen gemessen. Wie erwartet, bewirkten die Referenz-Selenverbindungen Selenit und Selenomethionin eine effiziente Induktion der GPx-Aktivität, im Gegensatz zu diesen hatte SeN keinen Einfluss auf die GPx-Aktivität. Um die Möglichkeit einer Einbettung von SeN in das Selenoproteom zu untersuchen, wurde SelenoP im Kulturmedium gemessen. Obwohl Caco-2-Zellen SeN effektiv in viel höherenMengen als Selenit oder Selenomethionin aufnehmen, wurde nach der SeN-Inkubation keine Sekretion von SelenoP beobachtet. Zusammenfassend können wir schlussfolgern, dass SeN kaum als Se-Quelle für die Selenoproteinsynthese dienen kann. SeN weist jedoch starke antioxidative Eigenschaften auf, die auftreten, wenn Schwefel in ET durch Se ausgetauscht wird. Daher ist SeN von besonderem Interesse für die Forschung, nicht als Teil des Se-Stoffwechsels, sondern als wichtiges endemisches diätetisches Antioxidans. KW - selenium KW - selenoneine KW - HepG2 KW - Caco-2 KW - PBCEC KW - Caco-2 KW - HepG2 KW - PBCEC KW - Selen KW - Selenonein Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573794 ER - TY - THES A1 - Dubinovska, Daria T1 - Optical surveys of AGN and their host galaxies T1 - Optische Durchmusterungen von aktiven Galaxienkernen und ihren Muttergalaxien N2 - This thesis rests on two large Active Galactic Nuclei (AGNs) surveys. The first survey deals with galaxies that host low-level AGNs (LLAGN) and aims at identifying such galaxies by quantifying their variability. While numerous studies have shown that AGNs can be variable at all wavelengths, the nature of the variability is still not well understood. Studying the properties of LLAGNs may help to understand better galaxy evolution, and how AGNs transit between active and inactive states. In this thesis, we develop a method to extract variability properties of AGNs. Using multi-epoch deep photometric observations, we subtract the contribution of the host galaxy at each epoch to extract variability and estimate AGN accretion rates. This pipeline will be a powerful tool in connection with future deep surveys such as PANSTARS. The second study in this thesis describes a survey of X-ray selected AGN hosts at redshifts z>1.5 and compares them to quiescent galaxies. This survey aims at studying environments, sizes and morphologies of star-forming high-redshift AGN hosts in the COSMOS Survey at the epoch of peak AGN activity. Between redshifts 1.51.5 to date. We analyzed the evolution of structural parameters of AGN and non-AGN host galaxies with redshift, and compared their disturbance rates to identify the more probable AGN triggering mechanism in the 43.5 1.5, um sie mit inaktiven Galaxien zu vergleichen. Ziel ist, bei sternbildenden, hochrotverschobenen AGN-Muttergalaxien aus der COSMOS-Durchmusterung die Umgebung, Grösse und Morphologie zum Zeitpunkt der stärksten AGN Aktivität zu studieren. Die COSMOS-HST/ACS-Photometrie untersucht den ultravioletten Spektralbereich von Muttergalaxien bei einer Rotverschiebung von 1.5 < z < 3.8, wo es sehr schwierig ist, den Flussbeitrag des AGN von dem der Muttergalaxie zu trennen. Dennoch gelang es uns, mittels zweidimensionaler Modellierung der Flächenhelligkeitprofile Struktureigenschaften für 249 AGN-Muttergalaxien aus der COSMOS-Durchmusterung abzuleiten. Dies ist für AGN-Muttergalaxien mit einer Rotverschiebung z > 1.5 die bislang grösste Stichprobe. Wir haben die Entwicklung der Strukturparameter mit der Rotverschiebung von AGN-Muttergalaxien und Galaxien ohne aktiven Kern analysiert und die Häufigkeit morphologischer Besonderheiten bei diesen beiden Gruppen miteinander verglichen, um die wahrscheinlichste Ursache für AGN-Aktivität für Galaxien im Roentgen-Leuchtkraft-Bereich von 43.5 130 °C). The sequential UV-A radiation and thermal reprogramming over three cycles demonstrate high conversions and reproducible programming of rheological properties. In contrast, the photochemical back reaction by UV-C is incomplete and can only partially restore the initial rheological properties. The dynamic moduli increase with each cycle in photochemical programming, presumably resulting from a chain segment re-arrangement as a result of the repeated partial photocleavage and subsequent chain length-dependent dimerization. In addition, long periods of radiation cause photooxidative degradation, which damages photo-responsive functions and consequently reduces the programming range. The absence of oxygen, however, reduces undesired side reactions. Anthracene-functionalized PDMS and native PDMS mix depending on the anthracene ester content and chain length, respectively, and allow fine-tuning of programmable rheological properties. The work shows the influence of mixing conditions during the photoprogramming step on the rheological properties, indicating that material property gradients induced by light attenuation along the beam have to be considered. Accordingly, thin lubricant films are suggested as potential application for light-programmable silicon fluids. The second part compares strategies for the grafting of spiropyran (SP) containing copolymer brushes from Si wafers and evaluates the light-responsiveness of the surfaces. Pre-experiments on the kinetics of the thermally initiated RAFT copolymerization of 2-hydroxyethyl acrylate (HEA) and spiropyran acrylate (SPA) in solution show, first, a strong retardation by SP and, second, the dependence of SPA polymerization on light. Surprisingly, the copolymerization of SPA is inhibited in the dark. These findings contribute to improve the synthesis of polar, spiropyran-containing copolymers. The comparison between initiator systems for the grafting-from approach indicates PET-RAFT superior to thermally initiated RAFT, suggesting a more efficient initiation of surface-bound CTA by light. Surface-initiated polymerization via PET-RAFT with an initiator system of EosinY (EoY) and ascorbic acid (AscA) facilitates copolymer synthesis from HEA and 5-25 mol% SPA. The resulting polymer film with a thickness of a few nanometers was detected by atomic force microscopy (AFM) and ellipsometry. Water contact angle (CA) measurements demonstrate photo-switchable surface polarity, which is attributed to the photoisomerization between non-polar spiropyran and zwitterionic merocyanine isomer. Furthermore, the obtained spiropyran brushes show potential for further studies on light-programmable properties. In this context, it would be interesting to investigate whether swollen spiropyran-containing polymers change their configuration and thus their film thickness under the influence of light. In addition, further experiments using an AFM or microtribometer should evaluate whether light-programmable solvation enables a change in frictional properties between polymer brush surfaces. N2 - Die Entwicklung neuartiger programmierbarer Materialien zur Anpassung von Reibung in Echtzeit birgt Potenzial, innovative Schmierungslösungen zu ermöglichen, um Verschleiß und Energieverluste zu reduzieren. Die vorliegende Arbeit beschreibt die Integration von Lichtlichtschaltbarkeit in zwei schmierende Materialien, Silikonöle und Oberflächen mit Polymerbürsten. Der erste Teil konzentriert sich auf die Bewertung von 9-Anthracenester-terminierten Polydimethylsiloxanen (PDMS-As) und insbesondere auf die Veränderbarkeit der rheologischen Eigenschaften sowie Implikationen, die sich bei der Verwendung von UV-Licht als externe Trigger ergeben. Der verwendete Rheometeraufbau enthält eine UV-transparente Quarzplatte, welche somit die Bestrahlung bei gleichzeitiger Messung der dynamischen Moduli ermöglicht. UV-A-Strahlung (354 nm) löst die Cycloadditionsreaktion zwischen den endständigen Funktionalitäten des linearen PDMS aus und führt so zu einer Kettenverlängerung. Die dabei gebildeten Anthracen-Dimere werden durch UV-C-Strahlung (254 nm) oder bei erhöhten Temperaturen (T > 130 °C) gespalten. Die sequentielle UV-A-Bestrahlung und thermische Reprogrammierung in drei Schaltzyklen führen zu hohen Umsätzen und zeigen reproduzierbar einstellbare Materialeigenschaften. Im Gegensatz dazu ist die photochemische Rückreaktion durch UV-C unvollständig und kann die ursprünglichen rheologischen Eigenschaften nur teilweise wiederherstellen. Die dynamischen Module nehmen mit jedem Zyklus der photochemischen Programmierung zu, was vermutlich auf eine Neuanordnung der Kettensegmente infolge der wiederholten partiellen Photospaltung und der anschließenden kettenlängenabhängigen Dimerisierung zurückzuführen ist. Darüber hinaus kommt es bei langer Bestrahlungsdauer zu einem photooxidativen Abbau, der die photoschaltbaren Funktionen des Silikons beeinträchtigt und folglich den Programmierbereich verringert. Der Ausschluss von Sauerstoff reduziert jedoch unerwünschte Nebenreaktionen. Anthracenfunktionalisiertes PDMS und unfunktionalisiertes PDMS mischen sich in Abhängigkeit vom Anthracenestergehalt beziehungsweise der Kettenlänge und ermöglichen die Feinabstimmung programmierbarer rheologischer Eigenschaften. Die Arbeit zeigt den Einfluss der Mischungsbedingungen während des Photoprogrammierungsschritts auf die rheologischen Eigenschaften, was darauf hindeutet, dass Materialeigenschaftsgradienten, die durch Lichtabschwächung entlang des Lichtstrahls entstehen, berücksichtigt werden müssen. Entsprechend werden dünne Schmiermittelfilme als mögliche Anwendung für lichtprogrammierbare Silikonöle vorgeschlagen. Der zweite Teil vergleicht ‚grafting-from‘-Methoden zur Synthese Spiropyran(SP)-haltiger Copolyme auf Si-Wafern und bewertet die Lichtschaltbarkeit der Oberflächeneigenschaften. Vorversuche zur Kinetik der thermisch initiierten RAFT-Copolymerisation von 2-Hydroxyethylacrylat (HEA) und Spiropyranacrylat (SPA) in Lösung zeigen erstens, eine starke Retardierung durch SP, und zweitens, die Lichtabhängigkeit der SPA-Polymerisation. Überraschenderweise ist die Copolymerisation von SPA im Dunkeln gehemmt. Diese Ergebnisse tragen dazu bei, die Synthese von polaren, spiropyranhaltigen Copolymeren zu verbessern. Der Vergleich zwischen Initiatorsystemen für den ‚grafting-from‘-Ansatz zeigt, dass PET-RAFT der thermisch initiierten RAFT überlegen ist, was auf eine effizientere Initiierung von oberflächengebundenem CTA durch Licht hindeutet. Die oberflächeninitierte Polymerisation via PET-RAFT mit einem Initiatorsystem aus EosinY (EoY) und Ascorbinsäure (AscA) ermöglicht die Copolymersynthese aus HEA und 5-25 mol% SPA. Der entstandene Polymerfilm mit einer Dicke von einigen Nanometern wurde mittels Rasterkraftmikroskopie (AFM) und Ellipsometrie nachgewiesen. Die Messungen des Wasserkontaktwinkels (CA) zeigt eine photoschaltbare Oberflächenpolarität, welche der Photoisomerisierung zwischen unpolaren Spiropyran und zwitterionischen Merocyanin-Isomer zugeschrieben wird. Darüber hinaus zeigen die erhaltenen Spiropyranbürsten Potenzial für weitere Untersuchungen zu lichtprogrammierbaren Eigenschaften. In diesem Zusammenhang wäre es interessant weiterführend zu untersuchen, ob gequollene spiropyranhaltige Polymere unter Lichteinfluss tatsächlich ihre Konfiguration und damit ihre Filmdicke ändern. Darüber hinaus wäre es sinnvoll, mit Hilfe eines AFM oder Mikrotribometers zu evaluieren, ob diese lichtprogrammierbare Solvatisierung eine Veränderung der Reibungseigenschaften zwischen Polymerbürstenoberflächen ermöglicht. KW - programmable friction KW - lubricant KW - light-programmable viscosity KW - spiropyran copolymer KW - grafting-from Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553380 ER - TY - THES A1 - Gürtler, Christine T1 - Soziale Ungleichheit unter Kindern : über die Rolle von Kind- und Elternhausmerkmalen für die Akzeptanz und den Einfluss eines Kindes in seiner Schulklasse T1 - Social Inequality among children : the role of child- and parental attributes for the acceptance and the influence of children in their school-classes N2 - Ziel der Studie war die Untersuchung individueller und familialer Faktoren für den sozialen Status eines Kindes in seiner Schulklasse. Durch die Unterscheidung von Akzeptanz und Einfluss als zweier Hauptdimensionen des sozialen Status konnte die Arbeit aufklären, welche Rolle verschiedene Attribute für das Erreichen von Akzeptanz oder Einfluss spielen. 234 Dritt- und Fünftklässler aus Berliner Grundschulen erhielten soziometrische Maße, durch welche der soziale Status erhoben wurde (Akzeptanz und Einfluss). Individuelle und familiale Faktoren wurden mittels Peernominationen über das Verhalten der Kinder (Fremdurteil), Schulnoten (Lehrerangabe)und Maße des sozio-ökonomischen Status der Eltern (Elternangabe)erhoben. Die Ergebnisse zeigen, dass Akzeptanz positiv mit prosozialem und negativ mit aggressivem Verhalten eines Kindes assoziiert ist. Die Zusammenhänge dieser Verhaltensweisen mit Einfluss wiesen in dieselbe Richtung, waren aber deutlich geringer. Ideenreichtum und Humor hingen mit Akzeptanz und Einfluss gleichermaßen positiv zusammen, sowie Traurigsein gleichermaßen negativ mit beiden Statusdimensionen verbunden war. Das Verhalten eines Kindes vermittelte den Zusammenhang zwischen Merkmalen wie Geschlecht, relativem Alter, Schulnoten und der Akzeptanz und dem Einfluss eines Kindes. Zum Beispiel war die positive Beziehung zwischen Schulnoten und dem sozialen Status überwiegend auf die mit(guten)Schulnoten assoziierten Verhaltensweisen Prosozialität und (geringe) Aggressivität zurückzuführen. Die größere Akzeptanz von Mädchen ließ sich ebenso durch deren größere Prosozialität und geringere Aggressivität erklären. Jungen waren im Hinblick auf ihren Einfluss sowohl am oberen als auch am unteren Ende der Hierarchie überrepräsentiert. Sowohl sehr einflussreiche als auch einflusslose Jungen zeichneten sich durch eine erhöhte Aggressivität aus. Komplexere Analysen wiesen daraufhin, dass Jungen negative Auswirkungen von aggressivem Verhalten durch Humor und Ideenreichtum auf ihren Status kompensieren konnten. Der moderate Zusammenhang zwischen dem elterlichen sozioökonomischen Status und dem sozialen Status des Kindes wurde vollständig durch das Verhalten des Kindes mediiert. Das Elternhaus war wichtiger für die Akzeptanz als für den Einfluss eines Kindes. Kinder mit Migrationshintergrund waren sowohl weniger akzeptiert als auch weniger einflussreich in ihrer Klasse. Elterliche Trennung trug nicht zur sozialen Position eines Kindes bei. N2 - The goal of this study was to investigate individual and familial factors contributing to a child’s social status in its schoolclass. Separating acceptance and influence as two main dimensions of social status, this work aims at clarifying the impact of different attributes for becoming accepted or influential. 234 third and fifth grade children from Berlin schools were administered sociometric measures providing information about social status (acceptance and influence). The contributing factors where measured using peer nominations of each child’s behaviour, school-grades and familial variables such as the parents’ socio-economic status. Results show that acceptance was positively linked to prosocial and negatively linked to aggressive behaviour. Pointing in the same direction, influence was less related to aggression and prosociality than acceptance. Having ideas and a sense of humour contributed positively and being sad contributed negatively to both dimensions of social status. Furthermore, behavioural tendencies mediated the impact of non-behavioural attributes such as gender, relative age in class and school-grades on social status. For example, the positive relation between schoolgrades and social status was mainly mediated by prosocial and non-aggressive behaviour. Looking at gender, girls were more prosocial and less aggressive than boys and therefore more accepted than the latter. Within their class boys were more often represented at both ends of the influence dimension than girls. Moreover highly influential as well as powerless boys were found to be rather aggressive. More complex analyses showed that boys could possibly compensate the negative impact of aggression with humour and ideas. The moderate relation between parental SES and a child’s socials status was fully mediated by a child’s behaviour. SES was more important for the acceptance than for the influence of a child. Children with a migration background were both less accepted and influential. Parental separation did not contribute to a child’s social position. KW - Soziale Ungleichheit KW - Soziometrie KW - Macht KW - Gleichaltrigenbeziehungen KW - Sozialer Status KW - Popularity KW - Power KW - Sociometry KW - Social Status KW - peer relations Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-16797 ER - TY - THES A1 - Herbrich, Marcus T1 - Einfluss der erosionsbedingten Pedogenese auf den Wasserund Stoffhaushalt ackerbaulich genutzter Böden der Grundmoränenbodenlandschaft NO-Deutschlands - hydropedologische Untersuchungen mittels wägbarer Präzisionslysimeter T1 - Effects of erosion-affected soil evolution on water and dissolved carbon fluxes, soil hydraulic properties, and crop development of soils from a hummocky ground moraine landscape - hydropedological analysis using high precision weighing lysimeters N2 - In the arable soil landscape of hummocky ground moraines, an erosion-affected spatial differentiation of soils can be observed. Man-made erosion leads to soil profile modifications along slopes with changed solum thickness and modified properties of soil horizons due to water erosion in combination with tillage operations. Soil erosion creates, thereby, spatial patterns of soil properties (e.g., texture and organic matter content) and differences in crop development. However, little is known about the manner in which water fluxes are affected by soil-crop interactions depending on contrasting properties of differently-developed soil horizons and how water fluxes influence the carbon transport in an eroded landscape. To identify such feedbacks between erosion-induced soil profile modifications and the 1D-water and solute balance, high-precision weighing lysimeters equipped with a wide range of sensor technique were filled with undisturbed soil monoliths that differed in the degree of past soil erosion. Furthermore, lysimeter effluent concentrations were analyzed for dissolved carbon fractions in bi-weekly intervals. The water balance components measured by high precision lysimeters varied from the most eroded to the less eroded monolith up to 83 % (deep drainage) primarily caused due to varying amounts of precipitation and evapotranspiration for a 3-years period. Here, interactions between crop development and contrasting rainfall interception by above ground biomass could explain differences in water balance components. Concentrations of dissolved carbon in soil water samples were relatively constant in time, suggesting carbon leaching was mainly affected by water fluxes in this observation period. For the lysimeter-based water balance analysis, a filtering scheme was developed considering temporal autocorrelation. The minute-based autocorrelation analysis of mass changes from lysimeter time series revealed characteristic autocorrelation lengths ranging from 23 to 76 minutes. Thereby, temporal autocorrelation provided an optimal approximation of precipitation quantities. However, the high temporal resolution in lysimeter time series is restricted by the lengths of autocorrelation. Erosion-induced but also gradual changes in soil properties were reflected by dynamics of soil water retention properties in the lysimeter soils. Short-term and long-term hysteretic water retention data suggested seasonal wettability problems of soils increasingly limited rewetting of previously dried pore regions. Differences in water retention were assigned to soil tillage operations and the erosion history at different slope positions. The threedimensional spatial pattern of soil types that result from erosional soil profile modifications were also reflected in differences of crop root development at different landscape positions. Contrasting root densities revealed positive relations of root and aboveground plant characteristics. Differences in the spatially-distributed root growth between different eroded soil types provided indications that root development was affected by the erosion-induced soil evolution processes. Overall, the current thesis corroborated the hypothesis that erosion-induced soil profile modifications affect the soil water balance, carbon leaching and soil hydraulic properties, but also the crop root system is influenced by erosion-induced spatial patterns of soil properties in the arable hummocky post glacial soil landscape. The results will help to improve model predictions of water and solute movement in arable soils and to understand interactions between soil erosion and carbon pathways regarding sink-or-source terms in landscapes. N2 - Hydropedologische Wechselwirkungen zwischen Wasserflüssen und erosionsbedingten Veränderungen im Profilaufbau ackerbaulich genutzter Böden treten insbesondere in der Jungmoränenlandschaft auf, die sich durch eine überwiegend flachwellige bis kuppige Topographie auszeichnet. Mit der dynamischen Veränderung von Bodenprofilen, wie etwa der veränderten Solumtiefe und Horizontabfolgen, sowie deren Verteilungen in der Landschaft gehen Veränderungen in den bodenhydraulischen Eigenschaften einher. Über deren Auswirkungen auf den Wasser- und Stoffhaushalt ist bislang nur wenig bekannt. Im Rahmen dieser Dissertation wurden kontinuierliche Messungen aus vier Jahren (2011 bis 2014) unter Verwendung von wägbaren Lysimetern in der ackerbaulich genutzten Bodenlandschaft Nordostdeutschlands (Uckermark) erhoben. Dabei sollte die zentrale Frage, inwieweit die erosionsbedingte Pedogenese, in Wechselwirkung mit der pflanzenbaulichen Nutzung, den Wasser- und Kohlenstoffhaushalt beeinflusst, beantwortet werden. Ziel dieser Arbeit war es, 1D-Wasserflüsse und Austräge an gelöstem Kohlenstoff für unterschiedlich erodierte Bodenprofile zu quantifizieren. Damit einhergehend wurden Untersuchungen zu hydraulischen Bodeneigenschaften sowie möglichen Veränderungen im System Boden-Pflanze (Wurzeluntersuchungen) durchgeführt. Um derartige Veränderungen zwischen unterschiedlich erodierten Böden beschreiben zu können, wurden Bodenmonolithe in ungestörter Lagerung entnommen und in Lysimeteranlagen installiert. Zudem erfolgte eine Instrumentierung der einzelnen Lysimeter mit verschiedener Sensorik, u.a. um Wassergehalte und Matrixpotentiale zu messen. Für stoffhaushaltliche Untersuchungen wurden darüber hinaus Konzentrationen der gelösten Kohlenstofffraktion in der Bodenlösung in 14-tägigen Intervallen bestimmt. Der Wasserhaushalt von sechs gering bis stark erodierten Parabraunerden unterschied sich im Hinblick auf die bilanzierten Wasserhaushaltskomponenten deutlich. Anhand dieser Ergebnisse liegt die Vermutung nahe, dass die dynamischen Veränderungen im Gefüge- und Profilaufbau (in Abhängigkeit von der Bodenerosion) einen Effekt auf die Wasserbilanzen aufweisen. Über die mehrjährige Messperiode von 2011 bis 2014 konnte für das mit einer stark erodierten Parabraunerde gefüllte Lysimeter ein circa 83 Prozent höherer Abfluss als für das Lysimeter mit einer wenig erodierten Parabraunerde gemessen werden. Somit variierte der Abfluss am unteren Rand in Abhängigkeit zum Erosionsgrad. Neben dem unterschiedlichen Abflussverhalten variierten die Bodenmonolithe innerhalb der Lysimeter ebenfalls in den Evapotranspirations- und Niederschlagsmengen, hervorgerufenen durch die Differenzierung in den Horizontabfolgen, -mächtigkeiten und deren Einfluss auf die bodenhydraulischen Eigenschaften in Abhängigkeit vom Pflanzenbewuchs. Aufgrund der homogen verteilten Stoffkonzentrationen des gelösten organischen und anorganischen Kohlenstoffs am unteren Rand waren Kohlenstoffausträge maßgeblich von den Wasserflüssen abhängig. Als Grundlage der Lysimeter-basierten Wasserhaushaltsanalyse diente ein im Rahmen dieser Dissertation entwickeltes Auswertungsverfahren von kontinuierlichen Gewichtsänderungen unter Berücksichtigung der zeitlichen Autokorrelation. Um eine mögliche Periodizität in zeitlich hochaufgelösten Änderungen des Lysimeterwaagensystems zu ermitteln, fand eine Autokorrelationsfunktion in der Zeitreihenanalyse von vier saisonalen Messzeiträumen Anwendung. Die Ergebnisse der Arbeit deuten darauf hin, dass hochaufgelöste Lysimeterzeitreihen in einem Bereich von circa 30 min bis circa 60 min zeitlich autokorreliert sind. Die ermittelten Autokorrelationslängen bieten wiederum eine Möglichkeit zur Annäherung von (optimalen) Zeitintervallen für die Niederschlagsberechnung, basierend auf Änderungen in den Wiegedaten. Im Vergleich zu einem Kippwaagenregenmesser nahe der Lysimeterstation überstiegen die ermittelten Niederschlagsmengen der Lysimeter in Bodennähe die der in zwei Metern Höhe erfolgten Messung deutlich. Zur Charakterisierung der zeitlichen (Hysterese), als auch räumlichen (erosionsbedingter Pedogenese) Veränderungen der bodenhydraulischen Eigenschaften der Lysimeterböden wurden kontinuierliche Datenreihen des Wassergehaltes und Matrixpotentials analysiert. Die daraus abgeleiteten Wasserretentionskurven wurden in 3 Messtiefen (10, 30, 50 cm) unter Feldbedingungen ausgewertet und mit Labormessungen von Bodenkernen verglichen. Sowohl zwischen den unterschiedlich erodierten Bodenprofilen als auch zwischen den Feld- und Labormessungen waren Unterschiede in den Wasserretentionseigenschaften ersichtlich. Innerhalb eines Jahres (eingeschränkte Benetzbarkeit) sowie zwischen den Jahren (Veränderung der Porenmatrix) zeigten die Ergebnisse zudem eine zeitliche Veränderung der Wasserretentionseigenschaften. Diese dynamische Variabilität der Wasserretention wiederum unterliegt der räumlichen Heterogenität von Bodeneigenschaften, wie Textur und Lagerungsdichte. Für die Interpretation der unterschiedlichen bodenhydraulischen Eigenschaften sowie im Hinblick auf Veränderungen im Wasserhaushalt von ackerbaulich genutzten Lysimetern spielt das System Boden-Pflanze eine bedeutende Rolle. Diesbezüglich wurden Biomasse- und Wurzeluntersuchungen an unterschiedlich erodierten Böden durchgeführt. Die erzielten Ergebnisse verdeutlichen, dass erosionsbedingte Veränderungen im Profilaufbau beziehungsweise Horizonteigenschaften die Wurzelentwicklung beeinflussen können. Zudem stehen die Durchwurzelungsraten an grundwasserbeeinflussten Senkenstandorten in enger Beziehung zum Grundwasserstand (insbesondere im Frühjahr). Die oberirdisch beobachteten Unterschiede in der Biomasse korrelierten stark mit den ermittelten Wurzeldichten (Winterweizen), dies lässt vermuten, dass eine Abschätzung der Wurzelentwicklung mittels oberirdischer Biomasse möglich ist. Zusammenfassend zeigen die Ergebnisse der vorliegenden Lysimeterstudie komplexe Wechselwirkungen zwischen dem pedogenetischen Zustand erodierter Böden und dem Wasserhaushalt, den bodenhydraulischen Eigenschaften sowie der Wurzelentwicklung angebauter Kulturen. Zudem leisten die ermittelten unterschiedlichen Austragsraten an gelöstem Kohlenstoff einen Beitrag zur Abschätzung der langfristigen, in die Tiefe fortschreitenden Entkalkung sowie zur Beantwortung der Fragestellung, ob ackerbaulich genutzte Böden eher als Quell- oder als Senkenterm für Kohlendioxid fungieren. KW - Lysimeter KW - Wasserhaushalt KW - Kohlenstoff KW - lysimeter KW - water balance KW - carbon Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408561 ER - TY - THES A1 - Herrero Alonso, Yohana T1 - Properties of high-redshift galaxies in different environments T1 - Eigenschaften von Galaxien mit hoher Rotverschiebung in verschiedenen Umgebungen N2 - The Lyman-𝛼 (Ly𝛼) line commonly assists in the detection of high-redshift galaxies, the so-called Lyman-alpha emitters (LAEs). LAEs are useful tools to study the baryonic matter distribution of the high-redshift universe. Exploring their spatial distribution not only reveals the large-scale structure of the universe at early epochs, but it also provides an insight into the early formation and evolution of the galaxies we observe today. Because dark matter halos (DMHs) serve as sites of galaxy formation, the LAE distribution also traces that of the underlying dark matter. However, the details of this relation and their co-evolution over time remain unclear. Moreover, theoretical studies predict that the spatial distribution of LAEs also impacts their own circumgalactic medium (CGM) by influencing their extended Ly𝛼 gaseous halos (LAHs), whose origin is still under investigation. In this thesis, I make several contributions to improve the knowledge on these fields using samples of LAEs observed with the Multi Unit Spectroscopic Explorer (MUSE) at redshifts of 3 < 𝑧 < 6. N2 - Die Lyman-𝛼 (Ly𝛼)-Linie erleichtert die Detektion von Galaxien bei hoher Rotverschiebung, sogenannten den Lyman-Alpha-Emittern (LAEs). Die Erforschung ihrer Verteilung enthüllt nicht nur die großräumige Struktur des Universums in frühen Epochen, sondern bietet auch einen Einblick in die Entstehung und Entwicklung der Galaxien, die wir heute beobachten. Da Halos aus Dunkler Materie (DMHs) als Orte der Galaxienentstehung dienen, spiegelt die LAE-Verteilung auch die der zugrunde liegenden Dunklen Materie wider. Darüber hinaus sagen theoretische Studien voraus, dass die Verteilung von LAEs auch Auswirkungen auf ihr eigenes zirkumgalaktisches Medium (CGM) hat, indem sie ihre ausgedehnten gasförmigen Ly𝛼-Halos (LAHs) beeinflusst. In dieser Dissertation leiste ich mehrere Beiträge zur Verbesserung des Wissens über diese Felder anhand von Stichproben von LAEs, die mit dem Multi Unit Spectroscopic Explorer (MUSE) bei Rotverschiebungen von 3 < 𝑧 < 6 beobachtet wurden. KW - high-redshift KW - Lyman-alpha emitters KW - clustering KW - large-scale structure KW - Lyman-Alpha-Emitter KW - Clustering KW - hoher Rotverschiebung KW - großräumige Struktur des Universums Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613288 ER - TY - THES A1 - Hoffmann, Anne T1 - Comparative aerosol studies based on multi-wavelength Raman LIDAR at Ny-Ålesund, Spitsbergen T1 - Vergleichende Aerosolstudien mittels Mehrwellenlängen-Raman-LIDAR in Ny-Ålesund,Spitzbergen N2 - The Arctic is a particularly sensitive area with respect to climate change due to the high surface albedo of snow and ice and the extreme radiative conditions. Clouds and aerosols as parts of the Arctic atmosphere play an important role in the radiation budget, which is, as yet, poorly quantified and understood. The LIDAR (Light Detection And Ranging) measurements presented in this PhD thesis contribute with continuous altitude resolved aerosol profiles to the understanding of occurrence and characteristics of aerosol layers above Ny-Ålesund, Spitsbergen. The attention was turned to the analysis of periods with high aerosol load. As the Arctic spring troposphere exhibits maximum aerosol optical depths (AODs) each year, March and April of both the years 2007 and 2009 were analyzed. Furthermore, stratospheric aerosol layers of volcanic origin were analyzed for several months, subsequently to the eruptions of the Kasatochi and Sarychev volcanoes in summer 2008 and 2009, respectively. The Koldewey Aerosol Raman LIDAR (KARL) is an instrument for the active remote sensing of atmospheric parameters using pulsed laser radiation. It is operated at the AWIPEV research base and was fundamentally upgraded within the framework of this PhD project. It is now equipped with a new telescope mirror and new detection optics, which facilitate atmospheric profiling from 450m above sea level up to the mid-stratosphere. KARL provides highly resolved profiles of the scattering characteristics of aerosol and cloud particles (backscattering, extinction and depolarization) as well as water vapor profiles within the lower troposphere. Combination of KARL data with data from other instruments on site, namely radiosondes, sun photometer, Micro Pulse LIDAR, and tethersonde system, resulted in a comprehensive data set of scattering phenomena in the Arctic atmosphere. The two spring periods March and April 2007 and 2009 were at first analyzed based on meteorological parameters, like local temperature and relative humidity profiles as well as large scale pressure patterns and air mass origin regions. Here, it was not possible to find a clear correlation between enhanced AOD and air mass origin. However, in a comparison of two cloud free periods in March 2007 and April 2009, large AOD values in 2009 coincided with air mass transport through the central Arctic. This suggests the occurrence of aerosol transformation processes during the aerosol transport to Ny-Ålesund. Measurements on 4 April 2009 revealed maximum AOD values of up to 0.12 and aerosol size distributions changing with altitude. This and other performed case studies suggest the differentiation between three aerosol event types and their origin: Vertically limited aerosol layers in dry air, highly variable hygroscopic boundary layer aerosols and enhanced aerosol load across wide portions of the troposphere. For the spring period 2007, the available KARL data were statistically analyzed using a characterization scheme, which is based on optical characteristics of the scattering particles. The scheme was validated using several case studies. Volcanic eruptions in the northern hemisphere in August 2008 and June 2009 arose the opportunity to analyze volcanic aerosol layers within the stratosphere. The rate of stratospheric AOD change was similar within both years with maximum values above 0.1 about three to five weeks after the respective eruption. In both years, the stratospheric AOD persisted at higher rates than usual until the measurements were stopped in late September due to technical reasons. In 2008, up to three aerosol layers were detected, the layer structure in 2009 was characterized by up to six distinct and thin layers which smeared out to one broad layer after about two months. The lowermost aerosol layer was continuously detected at the tropopause altitude. Three case studies were performed, all revealed rather large indices of refraction of m = (1.53–1.55) - 0.02i, suggesting the presence of an absorbing carbonaceous component. The particle radius, derived with inversion calculations, was also similar in both years with values ranging from 0.16 to 0.19 μm. However, in 2009, a second mode in the size distribution was detected at about 0.5 μm. The long term measurements with the Koldewey Aerosol Raman LIDAR in Ny-Ålesund provide the opportunity to study Arctic aerosols in the troposphere and the stratosphere not only in case studies but on longer time scales. In this PhD thesis, both, tropospheric aerosols in the Arctic spring and stratospheric aerosols following volcanic eruptions have been described qualitatively and quantitatively. Case studies and comparative studies with data of other instruments on site allowed for the analysis of microphysical aerosol characteristics and their temporal evolution. N2 - Die Arktis ist ein bezüglich Klimaveränderungen besonders sensitives Gebiet, d.h. die globale Erwärmung wirkt sich aufgrund der saisonal hochvariablen Strahlungsbedingungen und der Bodenalbedo dort verstärkt aus.Wolken und Aerosole als Bestandteile der arktischen Atmosphäre spielen dabei eine besondere Rolle im Strahlungsgleichgewicht. Die vorliegende Promotionsarbeit leistet mit Hilfe von LIDAR-Messungen (Light Detection and Ranging) einen Beitrag zum Verständnis von Vorkommen und Eigenschaften von Aerosolschichten über Ny-Ålesund, Spitzbergen. Besonderes Augenmerk liegt dabei auf der Analyse von Zeiträumen mit erhöhter Aerosolbelastung. Es wurde zum einen die arktische Troposphäre zweier Frühjahre (März und April der Jahre 2007 und 2009) untersucht, da im Frühjahr die Aerosol-optische Dicke (AOD) in der Arktis Maximalwerte erreicht. Zum anderen wurden stratosphärische Aerosolschichten vulkanischen Ursprungs analysiert, die in den Sommern 2008 und 2009 nach Ausbrüchen der Kasatochi und Sarychev Vulkane jeweils für mehrere Monate in der unteren Stratosphäre messbar waren. Das an der AWIPEV Forschungsstation betriebene Koldewey Aerosol Raman LIDAR (KARL), ein Instrument zur optischen Fernerkundung atmosphärischer Parameter mittels gepulster Laserstrahlung, wurde im Rahmen der Promotion grundlegend überarbeitet und mit einem neuen Teleskop sowie neuen Detektoroptiken versehen. Dies ermöglicht die Profilerfassung ab 450m über dem Meeresspiegel bis in die mittlere Stratosphäre. KARL liefert hochaufgelöste Messungen der Streueigenschaften von Aerosol- undWolkenteilchen (Rückstreuung, Extinktion und Depolarisation) sowieWasserdampfprofile in der unteren Troposphäre. Durch die Kombination von KARL Messungen mit Daten anderer Messgeräte an der AWIPEV Forschungsstation wie Radiosonden, Sonnenphotometer, Micro Pulse LIDAR und Fesselsonden wurde ein umfassender Datenbestand von Streuphänomenen in der arktischen Atmosphäre geschaffen. Die beiden genannten Frühjahreszeiträume März und April 2007 und 2009 wurden zunächst anhand meteorologischer Parameter, wie lokaler Temperatur- und Feuchteprofile sowie großskaliger Druckmuster und Luftmassenquellgebiete analysiert. Dabei konnte kein eindeutiger Zusammenhang zwischen Quellgebieten und erhöhter AOD festgestellt werden. In einem Vergleich zweier wolkenfreier Perioden im März 2007 und April 2009 war jedoch die höhere Aerosolbelastung in 2009 mit dem Transport von Luftmassen durch die innere Arktis verbunden. Aufgrund der begrenzten Lebensdauer von Aerosolen lässt das entweder Aerosol-Entstehungsprozesse in der Zentralarktis oder Transformationsprozesse während des Transportes nach Ny-Ålesund vermuten. Für Messungen am 4. April 2009 mit Maximalwerten der AOD von bis zu 0.12 konnte die Größe der Aerosolteilchen in verschiedenen Höhen mit Hilfe von Inversionsrechnungen abgeschätzt werden. Diese und andere betrachtete Fallstudien legen eine Unterscheidung von Aerosolereignissen in drei Kategorien nahe, die sich in ihrer Entstehung deutlich unterscheiden: Vertikal begrenzte Aeosolschichten in trockener Luft, zeitlich hochvariable feuchte Aerosolschichten in der planetaren Grenzschicht sowie eine erhöhte Aerosolbelastung über große Teile der Troposphäre. Für das sehr klare Frühjahr 2007 wurden die vorhandenen KARL-Daten mit Hilfe eines Klassifikationsschemas, das auf den optischen Eigenschaften der streuenden Teilchen beruht, statistisch ausgewertet. Das verwendete Schema wurde mit Hilfe von verschiedenen Fallstudien validiert und ermöglicht bei Anwendung auf größere Datenbestände eine aussagekräftige Analyse von jährlichen Schwankungen der Aerosol- und Wolkenvorkommen über Ny-Ålesund. Die Ausbrüche zweier Vulkane in der nördlichen Hemisphäre im August 2008 und im Juni 2009 erlaubten die Analyse vulkanischer Aerosolschichten in der Stratosphäre. Die zeitliche Entwicklung der stratosphärischen AOD verlief in beiden Jahren ähnlich mit Maximalwerten von über 0.1 etwa drei bis fünfWochen nach dem jeweiligen Ausbruch. In beiden Jahren wurden bis zum technisch bedingten Abbruch der Messungen jeweils Ende September erhöhte stratosphärische AOD Werte gemessen. Die niedrigste Aerosolschicht konnte jeweils direkt an der Tropopause detektiert werden. Im Jahr 2008 wurden bis zu drei Schichten detektiert, die Struktur 2009 war durch bis zu sechs schmale Schichten gekennzeichnet, die nach etwa zwei Monaten zu einer breiten Schicht verschmierten. Drei Fallstudien zu mikrophysikalischen Aerosoleigenschaften wurden durchgeführt. Dabei wurden für beide Jahre sehr große Brechungsindices von m=(1.53–1.55) - 0.02i ermittelt, die auf eine absorbierende Kohlenstoffkomponente der Vulkanaerosole hinweisen. Der errechnete Teilchenradius war ebenfalls in beiden Jahren vergleichbar mit Werten zwischen 0.16 und 0.19 μm. 2009 wurde zusätzlich ein zweites Maximum der Größenverteilung bei ca. 0.5μm gefunden. Die Langzeitmessungen mit dem Koldewey Aerosol Raman LIDAR KARL in Ny-Ålesund schaffen die Möglichkeit, arktische Aerosole in Troposphäre und Stratosphäre nicht nur in Fallstudien, sondern auch über längere Zeiträume hinweg zu analysieren. Im Rahmen dieser Promotionsarbeit konnten sowohl Aerosolvorkommen in der arktischen Troposphäre im Frühjahr als auch eine vulkanisch bedingte erhöhte Aerosolbelastung in der Stratosphäre qualitativ und quantitativ beschrieben werden. Fallstudien und die Kombination mit Daten anderer Messgeräte ermöglichten Analysen mikrophysikalischer Aerosolparameter und deren Entwicklungsprozesse. KW - Arktis KW - Lidar KW - Aerosole KW - Fernerkundung KW - Arctic KW - Lidar KW - Aerosols KW - Remote Sensing Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52426 ER - TY - THES A1 - Hoffmann, Toni T1 - Cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O'Kane and Al'Shehbaz and Arabidopsis thaliana (L.) Heynhold T1 - Klonierung und Charakterisierung des HMA3 Genes und seines Promotors aus Arabidopsis halleri (L.) O'Kane und Al'Shehbaz und Arabidopsis thaliana (L.) Heynhold N2 - Being living systems unable to adjust their location to changing environmental conditions, plants display homeostatic networks that have evolved to maintain transition metal levels in a very narrow concentration range in order to avoid either deficiency or toxicity. Hence, plants possess a broad repertoire of mechanisms for the cellular uptake, compartmentation and efflux, as well as for the chelation of transition metal ions. A small number of plants are hypertolerant to one or a few specific transition metals. Some metal tolerant plants are also able to hyperaccumulate metal ions. The Brassicaceae family member Arabidopis halleri ssp. halleri (L.) O´KANE and AL´SHEHBAZ is a hyperaccumulator of zinc (Zn), and it is closely related to the non-hypertolerant and non-hyperaccumulating model plant Arabidopsis thaliana (L.) HEYNHOLD. The close relationship renders A. halleri a promising emerging model plant for the comparative investigation of the molecular mechanisms behind hypertolerance and hyperaccumulation. Among several potential candidate genes that are probably involved in mediating the zinc-hypertolerant and zinc-hyperaccumulating trait is AhHMA3. The AhHMA3 gene is highly similar to AtHMA3 (AGI number: At4g30120) in A. thaliana, and its encoded protein belongs to the P-type IB ATPase family of integral membrane transporter proteins that transport transition metals. In contrast to the low AtHMA3 transcript levels in A. thaliana, the gene was found to be constitutively highly expressed across different Zn treatments in A. halleri, especially in shoots. In this study, the cloning and characterisation of the HMA3 gene and its promoter from Arabidopsis halleri (L.) O´KANE and AL´SHEHBAZ and Arabidopsis thaliana (L.) HEYNHOLD is described. Heterologously expressed AhHMA3 mediated enhanced tolerance to Zn and to a much lesser degree to cadmium (Cd) but not to cobalt (Co) in metal-sensitive mutant strains of budding yeast. It is demonstrated that the genome of A. halleri contains at least four copies of AhHMA3, AhHMA3-1 to AhHMA3-4. A copy-specific real-time RT-PCR indicated that an AhHMA3-1 related gene copy is the source of the constitutively high transcript level in A. halleri and not a gene copy similar to AhHMA3-2 or AhHMA3-4. In accordance with the enhanced AtHMA3mRNA transcript level in A. thaliana roots, an AtHMA3 promoter-GUS gene construct mediated GUS activity predominantly in the vascular tissues of roots and not in shoots. However, the observed AhHMA3-1 and AhHMA3-2 promoter-mediated GUS activity in A. thaliana or A. halleri plants did not reflect the constitutively high expression of AhHMA3 in shoots of A. halleri. It is suggested that other factors e. g. characteristic sequence inserts within the first intron of AhHMA3-1 might enable a constitutively high expression. Moreover, the unknown promoter of the AhHMA3-3 gene copy could be the source of the constitutively high AhHMA3 transcript levels in A. halleri. In that case, the AhHMA3-3 sequence is predicted to be highly homologous to AhHMA3-1. The lack of solid localisation data for the AhHMA3 protein prevents a clear functional assignment. The provided data suggest several possible functions of the AhHMA3 protein: Like AtHMA2 and AtHMA4 it might be localised to the plasma membrane and could contribute to the efficient translocation of Zn from root to shoot and/or to the cell-to-cell distribution of Zn in the shoot. If localised to the vacuolar membrane, then a role in maintaining a low cytoplasmic zinc concentration by vacuolar zinc sequestration is possible. In addition, AhHMA3 might be involved in the delivery of zinc ions to trichomes and mesophyll leaf cells that are major zinc storage sites in A. halleri. N2 - Pflanzen sind lebende Systeme, die nicht in der Lage sind ihren Standort sich ändernden Umweltbedingungen anzupassen. Infolgedessen weisen Pflanzen homöostatischeNetzwerke auf, welche die Mengen an intrazellulären Übergangsmetallen in einem sehr engen Konzentrationsbereich kontrollieren um somit Vergiftungs- oder Mangelerscheinungen zu vermeiden. Eine kleine Anzahl von Pflanzen ist hypertolerant gegenüber einem oder mehreren Übergangsmetallen. Einige wenige dieser metalltoleranten Pflanzen sind fähig Übergangsmetalle in beträchtlichen Mengen zu speichern, sprich zu hyperakkumulieren, ohne Vergiftungserscheinungen zu zeigen. Die Haller’sche Schaumkresse (Arabidopis halleri ssp. halleri (L.) O´KANE und AL´SHEHBAZ) aus der Familie der Kreuzblütler (Brassicaceae) ist ein solcher Hyperakkumulator für Zink (Zn). Sie ist nah verwandt mit der Modellpflanze Ackerschmalwand (Arabidopsis thaliana (L.) HEYNHOLD), die jedoch nicht-hypertolerant und nicht-hyperakkumulierend für Übergangsmetalle ist. Diese nahe Verwandtschaft erlaubt vergleichende Studien der molekularen Mechanismen, die Hypertoleranz und Hyperakkumulation zu Grunde liegen. Zu der Gruppe von Kandidatengenen, die möglicherweise von Bedeutung für die Zink-hypertoleranten und -hyperakkumulierenden Eigenschaften von A. halleri sind, gehört AhHMA3, ein Gen mit großer Ähnlichkeit zu AtHMA3 (AGI Nummer: At4g30120) aus A. thaliana. Es kodiert ein Protein aus der Familie transmembraner Übergangsmetall-Transportproteine, den P-typ IB ATPasen. Im Gegensatz zu den niedrigen AtHMA3 Transkriptmengen in A. thaliana wird das AhHMA3 Gen in A. halleri in Gegenwart verschiedener Zn Konzentrationen konstitutiv hoch exprimiert, insbesondere im Spross der Pflanze. Diese Arbeit beschreibt die Klonierung und Charakterisierung des HMA3 Gens und seines Promoters aus A. halleri und A. thaliana. Es wurde gezeigt, dass heterolog exprimiertes AhHMA3 Protein in metallsensitiven Hefestämmen eine erhöhte Toleranz gegenüber Zink und zu einem geringen Grad gegenüber Kadmium (Cd) jedoch nicht gegenüber Kobalt (Co) vermittelt.Weiterhin wurden im Genom von A. halleri mindestens vier AhHMA3 Genkopien, AhHMA3-1 bis AhHMA3-4, nachgewiesen. Eine Genkopie-spezifische Echtzeit-RT-PCR (real-time RT-PCR) deutete darauf hin, dass eine zu AhHMA3-1 und nicht zu AhHMA3-2 oder AhHMA3-4 ähnliche Genkopie die Quelle der konstitutiv hohen Transkriptmengen in A. halleri ist. In Übereinstimmung mit erhöhten mRNS Transkriptmengen inWurzeln von A. thaliana, vermittelte ein AtHMA3 Promoter-GUS (ß-Glucuronidase) Genkonstrukt GUS-Aktivität hauptsächlich in den Leitgeweben der Wurzeln jedoch nicht des Sprosses. Die vermittelte GUS-Aktivität durch Promoterfragmente von AhHMA3-1 und AhHMA3-2 in A. thaliana oder A. halleri Pflanzen spiegelte jedoch nicht die konstitutiv hohe AhHMA3 Expression im Spross von A. halleri wieder. Es wird vermutet, dass andere Faktoren die konstitutiv hohe Expression ermöglichen wie zum Beispiel die gefundenen kopiespezifischen Sequenzinsertionen innerhalb des ersten AhHMA3-1 Introns. Weiterhin ist es denkbar, dass der unbekannte Promoter der AhHMA3-3 Genkopie die Quelle der konstitutiv hohen AhHMA3 Transkriptmengen ist. In diesem Fall wird eine sehr hohe Ähnlichkeit zwischen den Sequenzen von AhHMA3-3 und der AhHMA3-1 vorhergesagt. Es konnten keine deutlichen Ergebnisse zur intrazellulären Lokalisierung gemacht werden, die eine exakte Einordnung der Funktion des AhHMA3 Proteins erlauben würden. Die bisher ermittelten Ergebnisse schlagen jedoch mehrere mögliche Funktionen für AhHMA3 vor: Ähnlich den AhHMA3 homologen Proteinen, AtHMA2 und AtHMA4, könnte AhHMA3 in der Plasmamembran der Zelle sitzen und dort zur effizienten Translokation von Zink aus der Wurzel in den Spross und/oder zur Zell-zu-Zell Verteilung von Zn im Spross beitragen. Falls AhHMA3 in der Membran der Vakuole sitzt, könnte es eine Rolle bei der Aufrechterhaltung niedriger zytoplasmatischer Zinkkonzentrationen durch vakuoläre Zinksequestrierung spielen. Zusätzlich ist es denkbar, dass AhHMA3 an der Abgabe von Zinkionen an Trichome und Blattmesophyllzellen beteiligt ist, die die Haupteinlagerungsorte für Zink in A. halleri darstellen. KW - P-Typ ATPase KW - Übergangsmetalle KW - Hyperakkumulation KW - Zink KW - HMA KW - p-type ATPase KW - transition metals KW - hyperaccumulation KW - zinc KW - HMA Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15259 ER - TY - THES A1 - Holsten, Anne T1 - Climate change vulnerability assessments in the regional context T1 - Studien zur Vulnerabilität gegenüber Klimawandel im regionalen Kontext N2 - Adapting sectors to new conditions under climate change requires an understanding of regional vulnerabilities. Conceptually, vulnerability is defined as a function of sensitivity and exposure, which determine climate impacts, and adaptive capacity of a system. Vulnerability assessments for quantifying these components have become a key tool within the climate change field. However, there is a disagreement on how to make the concept operational in studies from a scientific perspective. This conflict leads to many still unsolved challenges, especially regarding the quantification and aggregation of the components and their suitable level of complexity. This thesis therefore aims at advancing the scientific foundation of such studies by translating the concept of vulnerability into a systematic assessment structure. This includes all components and implies that for each considered impact (e.g. flash floods) a clear sensitive entity is defined (e.g. settlements) and related to a direction of change for a specific climatic stimulus (e.g. increasing impact due to increasing days with heavy precipitation). Regarding the challenging aggregation procedure, two alternative methods allowing a cross-sectoral overview are introduced and their advantages and disadvantages discussed. This assessment structure is subsequently exemplified for municipalities of the German state North Rhine-Westphalia via an indicator-based deductive approach using information from literature. It can be transferred also to other regions. As for many relevant sectors, suitable indicators to express the vulnerability components are lacking, new quantification methods are developed and applied in this thesis, for example for the forestry and health sector. A lack of empirical data on relevant thresholds is evident, for example which climatic changes would cause significant impacts. Consequently, the multi-sectoral study could only provide relative measures for each municipality, in relation to the region. To fill this gap, an exemplary sectoral study was carried out on windthrow impacts in forests to provide an absolute quantification of the present and future impact. This is achieved by formulating an empirical relation between the forest characteristics and damage based on data from a past storm event. The resulting measure indicating the sensitivity is then combined with wind conditions. Multi-sectoral vulnerability assessments require considerable resources, which often hinders the implementation. Thus, in a next step, the potential for reducing the complexity is explored. To predict forest fire occurrence, numerous meteorological indices are available, spanning over a range of complexity. Comparing their performance, the single variable relative humidity outperforms complex indicators for most German states in explaining the monthly fire pattern. This is the case albeit it is itself an input factor in most indices. Thus, this meteorological factor alone is well suited to evaluate forest fire danger in many Germany regions and allows a resource-efficient assessment. Similarly, the complexity of methods is assessed regarding the application of the ecohydrological model SWIM to the German region of Brandenburg. The inter-annual soil moisture levels simulated by this model can only poorly be represented by simpler statistical approach using the same input data. However, on a decadal time horizon, the statistical approach shows a good performance and a strong dominance of the soil characteristic field capacity. This points to a possibility to reduce the input factors for predicting long-term averages, but the results are restricted by a lack of empirical data on soil water for validation. The presented assessments of vulnerability and its components have shown that they are still a challenging scientific undertaking. Following the applied terminology, many problems arise when implementing it for regional studies. Advances in addressing shortcomings of previous studies have been made by constructing a new systematic structure for characterizing and aggregating vulnerability components. For this, multiple approaches were presented, but they have specific advantages and disadvantages, which should also be carefully considered in future studies. There is a potential to simplify some methods, but more systematic assessments on this are needed. Overall, this thesis strengthened the use of vulnerability assessments as a tool to support adaptation by enhancing their scientific basis. N2 - Die Anpassung von Sektoren an veränderte klimatische Bedingungen erfordert ein Verständnis von regionalen Vulnerabilitäten. Vulnerabilität ist als Funktion von Sensitivität und Exposition, welche potentielle Auswirkungen des Klimawandels darstellen, und der Anpassungsfähigkeit von Systemen definiert. Vulnerabilitätsstudien, die diese Komponenten quantifizieren, sind zu einem wichtigen Werkzeug in der Klimawissenschaft geworden. Allerdings besteht von der wissenschaftlichen Perspektive aus gesehen Uneinigkeit darüber, wie diese Definition in Studien umgesetzt werden soll. Ausdiesem Konflikt ergeben sich viele Herausforderungen, vor allem bezüglich der Quantifizierung und Aggregierung der einzelnen Komponenten und deren angemessenen Komplexitätsniveaus. Die vorliegende Dissertation hat daher zum Ziel die Anwendbarkeit des Vulnerabilitätskonzepts voranzubringen, indem es in eine systematische Struktur übersetzt wird. Dies beinhaltet alle Komponenten und schlägt für jede Klimaauswirkung (z.B. Sturzfluten) eine Beschreibung des vulnerablen Systems vor (z.B. Siedlungen), welches direkt mit einer bestimmten Richtung eines relevanten klimatischen Stimulus in Verbindung gebracht wird (z.B. stärkere Auswirkungen bei Zunahme der Starkregentage). Bezüglich der herausfordernden Prozedur der Aggregierung werden zwei alternative Methoden, die einen sektorübergreifenden Überblick ermöglichen, vorgestellt und deren Vor- und Nachteile diskutiert. Anschließend wird die entwickelte Struktur einer Vulnerabilitätsstudie mittels eines indikatorbasierten und deduktiven Ansatzes beispielhaft für Gemeinden in Nordrhein-Westfalen in Deutschland angewandt. Eine Übertragbarkeit auf andere Regionen ist dennoch möglich. Die Quantifizierung für die Gemeinden stützt sich dabei auf Informationen aus der Literatur. Da für viele Sektoren keine geeigneten Indikatoren vorhanden waren, werden in dieser Arbeit neue Indikatoren entwickelt und angewandt, beispielsweise für den Forst- oder Gesundheitssektor. Allerdings stellen fehlende empirische Daten bezüglich relevanter Schwellenwerte eine Lücke dar, beispielsweise welche Stärke von Klimaänderungen eine signifikante Auswirkung hervorruft. Dies führt dazu, dass die Studie nur relative Aussagen zum Grad der Vulnerabilität jeder Gemeinde im Vergleich zum Rest des Bundeslandes machen kann. Um diese Lücke zu füllen, wird für den Forstsektor beispielhaft die heutige und zukünftige Sturmwurfgefahr von Wäldern berechnet. Zu diesem Zweck werden die Eigenschaften der Wälder mit empirischen Schadensdaten eines vergangenen Sturmereignisses in Verbindung gebracht. Der sich daraus ergebende Sensitivitätswert wird anschließend mit den Windverhältnissen verknüpft. Sektorübergreifende Vulnerabilitätsstudien erfordern beträchtliche Ressourcen, was oft deren Anwendbarkeit erschwert. In einem nächsten Schritt wird daher das Potential einer Vereinfachung der Komplexität anhand zweier sektoraler Beispiele untersucht. Um das Auftreten von Waldbränden vorherzusagen, stehen zahlreiche meteorologische Indices zur Verfügung, welche eine Spannbreite unterschiedlicher Komplexitäten aufweisen. Bezüglich der Anzahl monatlicher Waldbrände weist die relative Luftfeuchtigkeit für die meisten deutschen Bundesländer eine bessere Vorhersagekraft als komplexere Indices auf. Dies ist er Fall, obgleich sie selbst als Eingangsvariable für die komplexeren Indices verwendet wird. Mit Hilfe dieses einzelnen meteorologischen Faktors kann also die Waldbrandgefahr in deutschen Region ausreichend genau ausgedrückt werden, was die Ressourceneffizienz von Studien erhöht. Die Methodenkomplexität wird auf ähnliche Weise hinsichtlich der Anwendung des ökohydrologischen Modells SWIM für die Region Brandenburg untersucht. Die interannuellen Bodenwasserwerte, welche durch dieses Modell simuliert werden, können nur unzureichend durch ein einfacheres statistisches Modell, welches auf denselben Eingangsdaten aufbaut, abgebildet werden. Innerhalb eines Zeithorizonts von Jahrzehnten, kann der statistische Ansatz jedoch das Bodenwasser zufriedenstellend abbilden und zeigt eine Dominanz der Bodeneigenschaft Feldkapazität. Dies deutet darauf hin, dass die Komplexität im Hinblick auf die Anzahl der Eingangsvariablen für langfristige Berechnungen reduziert werden kann. Allerdings sind die Aussagen durch fehlende beobachtete Bodenwasserwerte zur Validierung beschränkt. Die vorliegenden Studien zur Vulnerabilität und ihren Komponenten haben gezeigt, dass eine Anwendung noch immer wissenschaftlich herausfordernd ist. Folgt man der hier verwendeten Vulnerabilitätsdefinition, treten zahlreiche Probleme bei der Implementierung in regionalen Studien auf. Mit dieser Dissertation wurden Fortschritte bezüglich der aufgezeigten Lücken bisheriger Studien erzielt, indem eine systematische Struktur für die Beschreibung und Aggregierung von Vulnerabilitätskomponenten erarbeitet wurde. Hierfür wurden mehrere Ansätze diskutiert, die jedoch Vor- und Nachteile besitzen. Diese sollten vor der Anwendung von zukünftigen Studien daher ebenfalls sorgfältig abgewogen werden. Darüber hinaus hat sich gezeigt, dass ein Potential besteht einige Ansätze zu vereinfachen, jedoch sind hierfür weitere Untersuchungen nötig. Insgesamt konnte die Dissertation die Anwendung von Vulnerabilitätsstudien als Werkzeug zur Unterstützung von Anpassungsmaßnahmen stärken. KW - Klimawandel KW - Impakt KW - Vulnerabilität KW - Forstwirtschaft KW - Boden KW - climate change KW - impact KW - vulnerability KW - forestry KW - soil Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66836 ER - TY - THES A1 - Höchner, Andreas T1 - GPS based analysis of earthquake induced phenomena at the Sunda Arc T1 - GPS-basierte Analyse erdbebeninduzierter Phänomene am Sundabogen N2 - Indonesia is one of the countries most prone to natural hazards. Complex interaction of several tectonic plates with high relative velocities leads to approximately two earthquakes with magnitude Mw>7 every year, being more than 15% of the events worldwide. Earthquakes with magnitude above 9 happen far more infrequently, but with catastrophic effects. The most severe consequences thereby arise from tsunamis triggered by these subduction-related earthquakes, as the Sumatra-Andaman event in 2004 showed. In order to enable efficient tsunami early warning, which includes the estimation of wave heights and arrival times, it is necessary to combine different types of real-time sensor data with numerical models of earthquake sources and tsunami propagation. This thesis was created as a result of the GITEWS project (German Indonesian Tsunami Early Warning System). It is based on five research papers and manuscripts. Main project-related task was the development of a database containing realistic earthquake scenarios for the Sunda Arc. This database provides initial conditions for tsunami propagation modeling used by the simulation system at the early warning center. An accurate discretization of the subduction geometry, consisting of 25x150 subfaults was constructed based on seismic data. Green’s functions, representing the deformational response to unit dip- and strike slip at the subfaults, were computed using a layered half-space approach. Different scaling relations for earthquake dimensions and slip distribution were implemented. Another project-related task was the further development of the ‘GPS-shield’ concept. It consists of a constellation of near field GPS-receivers, which are shown to be very valuable for tsunami early warning. The major part of this thesis is related to the geophysical interpretation of GPS data. Coseismic surface displacements caused by the 2004 Sumatra earthquake are inverted for slip at the fault. The effect of different Earth layer models is tested, favoring continental structure. The possibility of splay faulting is considered and shown to be a secondary order effect in respect to tsunamigenity for this event. Tsunami models based on source inversions are compared to satellite radar altimetry observations. Postseismic GPS time series are used to test a wide parameter range of uni- and biviscous rheological models of the asthenosphere. Steady-state Maxwell rheology is shown to be incompatible with near-field GPS data, unless large afterslip, amounting to more than 10% of the coseismic moment is assumed. In contrast, transient Burgers rheology is in agreement with data without the need for large aseismic afterslip. Comparison to postseismic geoid observation by the GRACE satellites reveals that even with afterslip, the model implementing Maxwell rheology results in amplitudes being too small, and thus supports a biviscous asthenosphere. A simple approach based on the assumption of quasi-static deformation propagation is introduced and proposed for inversion of coseismic near-field GPS time series. Application of this approach to observations from the 2004 Sumatra event fails to quantitatively reconstruct the rupture propagation, since a priori conditions are not fulfilled in this case. However, synthetic tests reveal the feasibility of such an approach for fast estimation of rupturing properties. N2 - Indonesien ist eines der am stärksten von Naturkatastrophen bedrohten Länder der Erde. Die komplexe Interaktion mehrer tektonischer Platten, die sich mit hohen Relativgeschwindigkeiten zueinander bewegen, führt im Mittel zu ungefähr zwei Erdbeben mit Magnitude Mw>7 pro Jahr, was mehr als 15% der Ereignisse weltweit entspricht. Beben mit Magnitude über 9 sind weitaus seltener, haben aber katastrophale Folgen. Die schwerwiegendsten Konsequenzen hierbei werden durch Tsunamis verursacht, welche durch diese Subduktionsbeben ausgelöst werden, wie das Sumatra-Andamanen Ereignis von 2004 gezeigt hat. Um eine wirksame Tsunami-Frühwarnung zu ermöglichen, welche die Abschätzung der Wellenhöhen und Ankunftszeiten beinhaltet, ist es erforderlich, verschieden Arten von Echtzeit-Sensordaten mit numerischen Modellen für die Erdbebenquelle und Tsunamiausbreitung zu kombinieren. Diese Doktorarbeit wurde im Rahmen des GITEWS-Projektes (German Indonesian Tsunami Early Warning System) erstellt und umfasst fünf Fachpublikationen und Manuskripte. Projektbezogene Hauptaufgabe war die Erstellung einer Datenbank mit realistischen Bebenszenarien für den Sundabogen. Die Datenbank beinhaltet Anfangsbedingungen für die Tsunami-Ausbreitungsmodellierung und ist Teil des Simulationssystems im Frühwarnzentrum. Eine sorgfältige Diskretisierung der Subduktionsgeometrie, bestehend aus 25x150 subfaults, wurde basierend auf seismischen Daten erstellt. Greensfunktionen, welche die Deformation, hervorgerufen durch Verschiebung an den subfaults ausmachen, wurden mittels eines semianalytischen Verfahrens für den geschichteten Halbraum berechnet. Verschiedene Skalierungsrelationen für Erdbebendimension und slip-Verteilung wurden implementiert. Eine weitere projektbezogene Aufgabe war die Weiterentwicklung des ‚GPS-Schild’-Konzeptes. Dieses besteht aus einer Konstellation von GPS-Empfängern im Nahfeldbereich, welche sich als sehr wertvoll für die Tsunami-Frühwarnung erweisen. Der größere Teil dieser Doktorarbeit beschäftigt sich mit der geophysikalischen Interpretation von GPS-Daten. Coseismische Verschiebungen an der Erdoberfläche, ausgelöst durch das Erdbeben von 2004, werden nach slip an der Verwerfung invertiert. Die Wirkung verschiedener Erdschichtungsmodelle wird getestet und resultiert in der Bevorzugung einer kontinentalen Struktur. Die Möglichkeit von splay-faulting wird untersucht und erweist sich als zweitrangiger Effekt bezüglich der Tsunamiwirkung für dieses Ereignis. Die auf der Quelleninversion basierenden Tsunamimodelle werden mit satellitengestützen Radaraltimetriedaten verglichen. Postseismische GPS-Daten werden verwendet, um einen weiten Parameterbereich uni- und bi-viskoser Modelle der Asthenosphäre zu testen. Dabei stellt sich stationäre Maxwell-Rheologie als inkompatibel mit Nahfeld-GPS-Zeitreihen heraus, es sei denn, eine große Quantität an afterslip, entsprechend etwa 10% des coseismischen Momentes, wird angenommen. Im Gegensatz dazu ist die transiente Burgers-Rheologie ohne große Mengen an afterslip kompatibel zu den Beobachtungen. Der Vergleich mit postseismischen Geoidbeobachtungen durch die GRACE-Satelliten zeigt, dass das Modell basierend auf Maxwell-Rheologie, auch mit afterslip, zu kleine Amplituden liefert, und bekräftigt die Annahme einer biviskosen Rheologie der Asthenosphäre. Ein einfacher Ansatz, der auf einer quasi-statischen Deformationsausbreitung beruht, wird eingeführt und zur Inversion coseismischer Nahfeld-GPS-Zeitreihen vorgeschlagen. Die Anwendung dieses Ansatzes auf Beobachtungen vom Sumatra-Beben von 2004 ermöglicht nicht die quantitative Rekonstruktion der Ausbreitung des Bruches, da die notwendigen Bedingungen in diesem Fall nicht erfüllt sind. Jedoch zeigen Experimente an synthetischen Daten die Gültigkeit eines solchen Ansatzes zur raschen Abschätzung der Bruchausbreitungseigenschaften. KW - GPS KW - Erdbeben KW - Tsunami KW - Rheologie KW - GITEWS KW - GPS KW - Earthquake KW - Tsunami KW - Rheology KW - GITEWS Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53166 ER - TY - THES A1 - Imran ul-haq, Muhammad T1 - Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂) T1 - Synthese von Fluorpolymeren in überkritischem Kohlendioxid (scCO₂) N2 - For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol−1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The “livingness” is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol−1·s−1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10−1, 9·10−2 and 2·10−4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 % for DTBP-derived end groups to a maximum of 62 % for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol–1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol–1 and PFHI (C6F13I) - derived end groups. N2 - Erstmalig gelang es, stabilisatorfreie Vinylidenfluorid (VDF)-Polymerisationen in homogener Phase mit überkritischem CO₂ (scCO₂) bis zu vollständigem Monomerumsatz durchzuführen. Die Homogenität während der Polymerisation wurde durch in-line Fourier-Transform Nahinfrarot Spektroskopie beobachtet. Für Polymerisationen bei 140 °C und 1500 bar wurde Di-tert-butylperoxid (DTBP) als Initiator verwendet. Es wurden Polymere mit einem Zahlenmittel der Molmasse kleiner 104 g·mol–1 und Polydispersitäten zwischen 3.1 und 5.7. erhalten. Um isotherme Reaktionen zu ermöglichen, wurden CO₂-Gehalte zwischen 61 und 83 wt.% verwendet. Die für die homogene Reaktionsführung erforderlichen hohen Drücke und Temperaturen haben keinen Einfluss auf die Mikrostruktur des Polymers. Zur Verringerung der Initiatorkonzentration wurden weitere Polymerisationen unter Verwendung von Kettentransferreagenzien (CTA) bei 120 °C und 1500 bar in homogener Phase mit scCO₂ durchgeführt. Perfluoriertes Hexyliodid als CTA ermöglicht kontrollierte radikalische Polymerisationen, wobei Polymere mit geringer Polydispersität zwischen 1.5 und 1.2 erhalten wurden. Endgruppenanalyse mit Elektronenspray-Ionisations-Massen¬spektro¬metrie (ESI-MS) zeigte, dass keine Initiatorendgruppen im Polymer enthalten sind. Diese Beobachtung unterstützt den lebenden Charakter der Polymerisationen und basiert auf einer labilen C-I-Bindung im Polymer. Aufgrund der schwachen C-I-Bindung trägt das perfluorierte Hexyliodid (C6F13I) auch zur Initiierung bei. Polymerisationen in Gegenwart von BrCCl3, C6F13Br und C6F13H zeigten, dass nur C6F13H keinen Beitrag zur Initiierung leistet. Bei 120 °C und 1500 bar wurde ein kp/kt0.5 von ~ 0.64 (L·mol−1·s−1)0.5 bestimmt, wobei kp der Wachstums- und kt der Terminierungsgeschwindigkeitskoeffizient sind. Die Kettentransfer¬konstanten (CT) bei 120°C betragen 8·10−1, 9·10−2 und 2·10−4 für C6F13I, C6F13Br und C6F13H. Die Änderung der CT-Werte lässt sich mit der zunehmenden Bindungsenergie in der Reihe C-I, C-Br und C-H erklären. Die labile C-I-Bindung ermöglicht eine Funktionalisierung des Polymers durch Click-Reaktionen. Nach Substitution der Iodid-Endgruppe durch eine Azidgruppe erfolgte eine katalysatorfreie 1,3-dipolare Cyclaoaddition mit Alkinen zu Polymeren mit 1,2,3-Triazol-Endgruppen. Dieses endfunktionalisierte PVDF besitzt im Vergleich zu konventionellem PVDF eine höhere thermische Stabilität. Nach der Expansion der Polymerisationsmischung mit scCO₂ auf Umgebungsbedingungen lag das Polymer als weißes Pulver vor, das im Hinblick auf z.B. Polymerendgruppen, Kristallinität, Gestalt und Größe der Partikel untersucht wurde. Rasterelektronenmikroskopie zeigte, dass Polymere mit DTBP-Endgruppen zu stapelförmigen Partikeln führen, während bei CTA-Fragmenten als Endgruppen schwamm- oder rosenartige Partikel erhalten wurden. Ergebnisse der FT-IR Spektroskopie und Weitwinkelröntgenbeugung zeigten, dass der höchste Gehalt an β-phasigem Material, der für die Piezoelektrizität des PVDF verantwortlich ist, für PVDF mit Initiatorendgruppen erhalten wurde. DSC (Differential Scanning Calorimetry) Messungen ergaben zudem, dass der Kristallinitätsgrad durch Endgruppen und Polymermasse beeinflusst wird. Die Expansion der homogenen Polymermischung kann als nicht-optimierter RESS-Prozess (Rapid Expanison from Supercritical Solution,) angesehen werden. Aus RESS Experimenten unter kontrollierten Bedingungen wurden jeweils nanoskalige primäre PVDF-Partikel ohne Verwendung von Lösungsmitteln, Tensiden oder anderen Additiven erhalten. Es besteht ein enger Zusammenhang zwischen einerseits der Partikelgröße und der Partikelgrößenverteilung und andererseits der Polymerkonzentration in scCO₂ vor der Expansion, bestimmt durch Polymerendgruppen und Molmassen der eingesetzten Materialien. KW - Synthese KW - Fluorpolymere KW - überkritisches Kohlendioxid (scCO₂) KW - Synthesis KW - fluorinated polymers KW - supercritical carbon dioxide (scCO₂) Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19868 ER - TY - THES A1 - Jentsch, Anna T1 - Soil gas analytics in geothermal exploration and monitoring T1 - Bodengasanalytik für die Exploration und Überwachung von geothermischen Ressourcen N2 - Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures. In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions. The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development. In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity). The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations. Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment. With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential. N2 - Zu den großen Herausforderungen bei der Erkundung und Nutzung geothermischer Ressourcen, gehören die strukturgeologische Charakterisierung eines geothermischen Systems sowie die Anwendung nachhaltiger Überwachungskonzepte, um Veränderungen im geothermischen Reservoir während der Förderung und/oder Injektion von Fluiden zu verstehen. Bei unzureichender Permeabilität des Reservoirgesteins stellen Verwerfungen und Kluftnetzwerke bevorzugte Bohrziele dar, da sie potentielle Wegsamkeiten für heiße und/oder kalte Fluide sind. Entlang dieser fluidführenden Strukturen können in vulkanisch-geothermischen Systemen auch erhebliche Mengen an Gasemissionen an der Erdoberfläche freigesetzt werden. Im Rahmen dieser Arbeit wurden verschiedene methodische Ansätze und Messkonzepte entwickelt und getestet, um die räumliche und zeitliche Variation verschiedener Bodengasparameter zu bestimmen und diese im Kontext struktureller Permeabilitäten zu interpretieren. Um das Potential der Bodengasanalytik als innovative geothermische Explorations- und Überwachungsmethode zu validieren, wurden die methodischen Ansätze auf drei verschiedene vulkanisch-geothermische Systeme angewendet. Diesbezüglich wurde für jeden Standort ein individueller Messansatz hinsichtlich der bekannten strukturgeologischen Merkmale und standortspezifischen Fragestellung entwickelt. Die erste Studie präsentiert Ergebnisse aus der kombinierten Messung des CO2-Flusses, der Bodentemperatur und der Analyse von Isotopenverhältnissen (δ13CCO2, 3He/4He), welche systematisch und flächendeckend in der geothermischen Produktionszone des Geothermalfeldes Los Humeros, Mexiko, gemessen wurden. Ziel war es, Bereiche mit einer Verbindung zum überkritischen (T > 374◦C and P > 221 bar) und bisher noch ungenutzten geothermischen Reservoir zu identifizieren. Das mit großem Punktabstand und systematisch generierte Messnetz (25 x 200 m) für die Bestimmung des CO2-Flusses erwies sich als schnelle und flexible Anwendung zur Identifizierung von Gebieten mit anomaler CO2-Entgasung. Basierend auf diesen Ergebnissen wurde anschließend mit geringeren Messabständen die genaue Ausdehnung und das heterogene Muster der anomalen Entgasungsgebiete aufgelöst. Dadurch war es möglich, die Entgasungsmuster mit der internen strukturgeologischen Heterogenität einzelner Störungssegmente in Verbindung zu bringen, wodurch Bereiche, die den Gasfluss besonders begünstigen, wie z.B. Störungsschnittpunkte, ermittelt werden konnten. Schließlich wurden vorher unbekannte, geothermisch interessante Bereiche, die eine erhöhte strukturelle Permeabilität aufweisen und eine Verbindung zum überkritischen Reservoir darstellen, identifiziert. Diese Bereiche gelten als besonders vielversprechend für die zukünftige geothermische Exploration und Entwicklung des Geothermalfeldes. In der zweiten Studie wird ein neuartiger Überwachungsansatz vorgestellt, bei dem kontinuierlich der CO2-Fluss gemessen wurde, um Veränderungen im Reservoir zu überwachen, die durch die Reinjektion von kaltem Thermalwasser verursacht werden. Zu diesem Zweck wurde ein automatisiertes Mehrkammer-CO2-Flusssystem innerhalb der Bruchzone einer Hauptstörung aufgebaut. Die Grundlage eines geeigneten Standortes wurde durch die Ergebnisse der CO2-Explorationsuntersuchungen gegeben. Es war von großer Wichtigkeit, dass der Standort eine Verbindung zum geothermischen Reservoir aufweist, erkennbar an hydrothermaler CO2-Entgasung und heißen Bodentemperaturen (> 50 °C). Die Ergebnisse zeigten ein Sinken der Gasemissionen als Reaktion auf Änderungen der Reinjektionsraten innerhalb von 24 h, was auf eine aktive hydraulische Kommunikation zwischen dem geothermischen Reservoir und der Erdoberfläche hinweist. Dies ist ein vielversprechende Methode, da nahezu in Echtzeit und in situ Daten über Veränderungen im Reservoir angezeigt werden und eine rechtzeitige Reaktion auf unerwünschte Veränderungen (z.B. Druckabfall, Seismizität) möglich ist. Die dritte Studie präsentiert Ergebnisse aus dem Aluto-Geothermiefeld in Äthiopien, bei dem eine flächendeckende, Multiparameter-Analyse, bestehend aus CO2-Fluss, 222Rn- und 220Rn-Aktivitätskonzentrationen und Bodentemperaturen durchgeführt wurde, um verborgene fluidführende Strukturen zu erkennen. Die 222Rn- und 220Rn-Aktivitätskonzentrationen wurden als ergänzende Bodengasparameter zum CO2-Fluss verwendet, um ihr Potenzial als zusätzliche Explorationsparameter zu bewerten. Die kombinierte Messung aller Parameter ermöglichte die Entwicklung von Bodengas Fingerabdrücken – ein neuartiger Visualisierungsansatz. Dadurch lässt sich in Abhängigkeit von der Menge an Gasemissionen und deren Fließgeschwindigkeiten das Untersuchungsgebiet in vulkanisch (Wärme), tektonisch (Strukturen) und vulkanischtektonisch dominierte Gebiete unterteilen. Basierend auf diesem Konzept stellen vulkanischtektonisch dominierte Gebiete die vielversprechendsten Ziele für die zukünftige geothermische Exploration und Entwicklung an diesem Standort dar, da hier heiße hydrothermale Fluide entlang durchlässiger Strukturen migrieren. Zwei solche, bisher nicht berücksichtigte Gebiete wurden im Süden und Südosten identifiziert. Darüber hinaus konnten zwei bisher unbekannte Gebiete mit strukturell bedingter Durchlässigkeit anhand der Aktivitätskonzentrationen von 222Rn und 220Rn identifiziert werden. Schließlich wird in der vierten Studie ein neuartiger Messansatz zum Nachweis der strukturbedingten CO2-Entgasung im geothermischen Gebiet Ngapouri, Neuseeland, vorgestellt. Zum ersten Mal wurde die Tunable-Diode-Laser-Methode (TDL) in einem geothermischen Gebiet mit geringer Entgasung angewandt, um ihr Potenzial als geothermische Explorationsmethode zu bewerten. Obwohl der Messansatz auf Profilmessungen basiert, was zu einer geringen räumlichen Auflösung führt, zeigen die Ergebnisse einen Zusammenhang zwischen bekannten und unbekannten Störungen sowie erhöhten CO2-Konzentrationen. Somit erwies sich die TDL-Methode bei der Bestimmung der strukturbedingten Permeabilität auch in solchen Gebieten als erfolgreich, in denen keine offensichtliche geothermische Aktivität vorhanden ist. Mit systematischen und kleinskaligen CO2-Fluss-Messungen, kann anschließend die räumliche Auflösung der Abschnitte eines Profils mit erhöhten CO2-Konzentrationen, verfeinert werden. Mit den Ergebnissen dieser Arbeit konnte ich die Anwendbarkeit systematischer und flächendeckender Bodengasmessungen für geothermische Explorations- und Überwachungszwecke nachweisen. Die Kombination von verschiedenen Bodengasen und deren Messung anhand verschiedener Messnetze ermöglicht die genaue Identifizierung und Charakterisierung fluidführender Strukturen und wurde bisher noch nicht standardmäßig eingesetzt und/oder erprobt. Mit den Ergebnissen der jeweiligen Studien werden effiziente und kostengünstige Arbeitsabläufe dargelegt, die einen praxisorientierten Ansatz zeigen, der zu einer erfolgreichen und nachhaltigen Exploration und Überwachung geothermischer Ressourcen beitragen kann. Letztlich wird somit das Ressourcenrisiko bei der geothermischen Projektentwicklung minimiert. Um das Verständnis der komplexen Struktur und Dynamik geothermischer Systeme voranzutreiben, ist schließlich eine Kombination aus innovativen und flächendeckenden geologischen, geochemischen und geophysikalischen Methoden unerlässlich. KW - geothermal exploration KW - gas geochemistry KW - structural geology KW - geothermal monitoring KW - Gasgeochemie KW - geothermische Exploration KW - geothermische Überwachung KW - Strukturgeologie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-544039 ER - TY - THES A1 - Jiang, Chunyan T1 - Multi-visualization and hybrid segmentation approaches within telemedicine framework T1 - Multi-Visualisierung und hybride Segmentierungsansätze auf dem Gebiet der Telemedizin N2 - The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension. N2 - Innovative Informationstechnologien haben viele Bereiche unseres Lebens verändert. Im Gesundheitsbereich ist es mittels Computer möglich, qualitativ hochwertige und große volumetrische Bilddaten zu verwalten, zu verarbeiten und dadurch die medizinische Betreuung zu unterstützen. In dieser Dissertation stelle ich verschiedene Methoden vor, die Mediziner beim Prozess der Beobachtung, Verarbeitung und Nutzung von Bilddaten verstärkt unterstützten können. Meine Forschungsarbeit befasst sich mit drei Schwerpunktthemen: Telemedizinintegration, Visualisierung von medizinischen Bildern und Bildsegmentierung. Zur Demonstration der Machbarkeit der vorgeschlagenen Methoden implementierte ich zudem eine Anwendungssoftware. Das entwickelte System kann in punkto Telemedizinintegration nicht nur Dateien im DICOM Format lesen und schreiben, sondern auch nicht-standardisierte Dateien reparieren. In meiner Arbeit gebe ich außerdem einen Vorschlag für eine Erweiterung des DICOM Standards für die Speicherung von 3D Bildinformationen. Zur Darstellung der Bilddaten wurden in dem entwickelten System drei verschiedene Ansichten implementiert: Volumen Ansicht, Oberflächen Ansicht sowie Querschnitt Ansicht. Ein Großteil meiner Arbeit ist der Vorschlag eines neuen hybriden Bildsegmentierungsansatzes. Durch das neu vorgeschlagene Verfahren können komplexe neurale MRI Daten effizient und präzise segmentiert werden. Zusätzlich wird der manuelle Arbeitsaufwand der Experten drastisch verringert. KW - medizinisch KW - bild KW - Segmentierung KW - medical KW - image KW - segmentation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12829 ER - TY - THES A1 - Jongejans, Loeka Laura T1 - Organic matter stored in ice-rich permafrost T1 - Ablagerung von organischem Kohlenstoff in eisreichem Permafrost BT - future permafrost thaw and greenhouse gas release BT - zukünftige Permafrosttauen und Treibhausgasemissionen N2 - The Arctic is changing rapidly and permafrost is thawing. Especially ice-rich permafrost, such as the late Pleistocene Yedoma, is vulnerable to rapid and deep thaw processes such as surface subsidence after the melting of ground ice. Due to permafrost thaw, the permafrost carbon pool is becoming increasingly accessible to microbes, leading to increased greenhouse gas emissions, which enhances the climate warming. The assessment of the molecular structure and biodegradability of permafrost organic matter (OM) is highly needed. My research revolves around the question “how does permafrost thaw affect its OM storage?” More specifically, I assessed (1) how molecular biomarkers can be applied to characterize permafrost OM, (2) greenhouse gas production rates from thawing permafrost, and (3) the quality of OM of frozen and (previously) thawed sediments. I studied deep (max. 55 m) Yedoma and thawed Yedoma permafrost sediments from Yakutia (Sakha Republic). I analyzed sediment cores taken below thermokarst lakes on the Bykovsky Peninsula (southeast of the Lena Delta) and in the Yukechi Alas (Central Yakutia), and headwall samples from the permafrost cliff Sobo-Sise (Lena Delta) and the retrogressive thaw slump Batagay (Yana Uplands). I measured biomarker concentrations of all sediment samples. Furthermore, I carried out incubation experiments to quantify greenhouse gas production in thawing permafrost. I showed that the biomarker proxies are useful to assess the source of the OM and to distinguish between OM derived from terrestrial higher plants, aquatic plants and microbial activity. In addition, I showed that some proxies help to assess the degree of degradation of permafrost OM, especially when combined with sedimentological data in a multi-proxy approach. The OM of Yedoma is generally better preserved than that of thawed Yedoma sediments. The greenhouse gas production was highest in the permafrost sediments that thawed for the first time, meaning that the frozen Yedoma sediments contained most labile OM. Furthermore, I showed that the methanogenic communities had established in the recently thawed sediments, but not yet in the still-frozen sediments. My research provided the first molecular biomarker distributions and organic carbon turnover data as well as insights in the state and processes in deep frozen and thawed Yedoma sediments. These findings show the relevance of studying OM in deep permafrost sediments. N2 - Die Arktis ist eine der sich am schnellsten verändernden Regionen der Erde, was zum tauen des dortigen Permafrosts führt. Eisreicher Permafrost, wie der spätpleistozäne Yedoma, ist besonders anfällig für schnelle und tiefe Auftauprozesse infolge von Absenkungen der Oberfläche nach dem Schmelzen des Grundeises. Durch das Auftauen des Permafrosts wird der im Permafrost gespeicherte Kohlenstoff für Mikroben zunehmend zugänglich, was zu erhöhten Treibhausgasemissionen führt und die Klimaerwärmung verstärkt. Die Untersuchung der molekularen Struktur und der biologischen Abbaubarkeit von organischem Material (OM) im Permafrost ist dringend erforderlich. In meiner Forschung geht es um die zentrale Frage inwieweit das Auftauen des Permafrost die Speicherfähigkeit von OM beeinflusst. Insbesondere untersuchte ich (1) wie molekulare Biomarker bei der Charakterisierung von Permafrost-OM verwendet werden können, (2) Treibhausgasproduktionsraten in auftauendem Permafrost und (3) die Qualität von OM in gefrorenen und (vorher) aufgetauten Sedimenten. Dazu habe ich tiefe (bis zu 55 m) Yedoma und aufgetaute Yedoma Permafrostsedimente aus Jakutien (Republik Sacha) untersucht. Es wurden Sedimentkerne unter Thermokarstseen auf der Bykovsky-Halbinsel (südöstlich des Lenadeltas) und im Yukechi-Alas (Zentraljakutien) entnommen, und deren Biomarkerkonzentrationen gemessen. Desweiteren wurden Bodenproben von der Permafrostklippe Sobo-Sise (Lenadelta) und der Taurutschung Batagai (Jana-Hochland) genommen und untersucht. Darüber hinaus habe ich Inkubationsexperimente durchgeführt, um die Treibhausgasproduktion in auftauenden Permafrost zu quantifizieren. Ich habe gezeigt, dass Biomarker-Proxies nützlich sind, um die Quelle des OM zu ermitteln und zwischen OM aus Landpflanzen, Wasserpflanzen und mikrobieller Aktivität zu unterscheiden. Außerdem sind einige Proxies hilfreich, den Abbaugrad von Permafrost-OM zu beurteilen. Dies trifft insbesondere in Kombination mit sedimentologischen Daten in einem Multi-Proxy-Ansatz. Ich zeigte dass der OM von Yedoma im Allgemeinen besser erhalten ist als der von aufgetauten Yedoma-Sedimenten. Die Treibhausgasproduktion in den erstmalig auftauenden Permafrostsedimenten war am höchsten. Dies bedeutet, dass die gefrorenen Yedoma-Sedimente das meiste labile OM enthielten. Außerdem zeigte ich, dass sich die methanproduzierenden Gemeinschaften in den frisch aufgetauten Sedimenten etabliert hatten, jedoch nicht in den noch gefrorenen Sedimenten. Meiner Forschung hat die ersten molekularen Biomarkerverteilungen und Kohlenstoffumsatzdaten geliefert und Einsichten in den Zustand und Prozesse von gefrorenen und aufgetauten Yedoma-Sedimenten geschaffen. Diese Ergebnisse demonstrieren die Relevanz der Untersuchung von OM in tiefen Permafrostsedimenten. N2 - Het Noordpoolgebied verandert snel en permafrost ontdooit. Met name ijsrijke permafrost, zoals Yedoma uit het laat Pleistoceen, is gevoelig voor snelle en diepe dooiprocessen als gevolg van bodemdaling na het smelten van bodemijs. Door het ontdooien van permafrost wordt het permafrostkoolstofreservoir beter toegankelijk voor microben, wat tot verhoogde broeikasgasemissies leidt en de klimaatopwarming versterkt. Het is van groot belang om de moleculaire structuur en de biologische afbreekbaarheid van organisch materiaal (OM) in permafrost vast te leggen. Mijn onderzoek draait om de vraag "hoe beinvloedt permafrostdooi de OM-opslag?" Specifiek heb ik onderzocht (1) hoe moleculaire biomarkers kunnen worden gebruikt om permafrost-OM te karakteriseren, (2) wat broeikasgasproductiesnelheden in ontdooiende permafrost zijn en (3) wat de kwaliteit is van het OM in bevroren en (eerder) ontdooide sedimenten. Ik heb diepe (max. 55 m) Yedoma en ontdooide Yedoma permafrostsedimenten uit Jakoetië (republiek Sacha) onderzocht. Sedimentkernen zijn genomen onder thermokarstmeren op het Bykovsky schiereiland (ten zuidoosten van de Lenadelta) en in de Yukechi Alas (centraal Jakoetië). Ook zijn bodemmonsters genomen van de permafrostklif Sobo-Sise (Lenadelta) en de zogenaamde thaw slump Batagai (Jana-hoogvlakte). In alle monsters heb ik de biomarkerconcentraties gemeten. Ook heb ik incubatie-experimenten uitgevoerd om de broeikasgasproductie in ontdooiende permafrost te kwantificeren. Mijn onderzoek wijst uit dat de biomarkerproxies nuttig zijn bij het vaststellen van de bron van het OM en om onderscheid te kunnen maken tussen OM van landplanten, waterplanten en OM afkomstig van microbiële activiteit. Daarnaast heb ik aangetoond dat sommige proxies nuttig zijn om de mate van degradatie van het OM vast te stellen, vooral in combinatie met sedimentologische data in een multi-proxy-benadering. Het blijkt dat het OM in Yedoma over het algemeen beter bewaard gebleven is dan het OM in ontdooide Yedoma-sedimenten. De broeikasgasproductie bleek het hoogst in de voor het eerst ontdooide permafrostsedimenten, wat betekent dat de bevroren Yedoma-sedimenten het meeste labiele OM bevatten. Bovendien heb ik aangetoond dat de methaan-producerende gemeenschappen zich wel in de recentelijk ontdooide sedimenten hebben gevestigd, maar nog niet in de nog bevroren sedimenten. Mijn onderzoek heeft de eerste moleculaire biomarker- en koolstofomzetdata en inzichten opgeleverd in de toestand en processen van diepe, bevroren en ontdooide Yedoma-sedimenten. Deze resultaten tonen de relevantie van het bestuderen van OM in diepe permafrostsedimenten. KW - permafrost sediments KW - organic matter KW - molecular biomarkers KW - anaerobic incubation experiments KW - Russian Arctic KW - Permafrostsedimente KW - organisches Material KW - molekulare Biomarker KW - anaerobe Inkubationensexperimente KW - russische Arktis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-564911 ER - TY - THES A1 - Kellermann, Thorsten T1 - Accurate numerical relativity simulations of non-vacuumspace-times in two dimensions and applications to critical collapse T1 - Exakte numerisch relativistische Simulationen der Nicht-Vakuum-Raum-Zeit in zwei Dimensionen und deren Anwendung zu Problemen des kritischen Kollaps N2 - This Thesis puts its focus on the physics of neutron stars and its description with methods of numerical relativity. In the first step, a new numerical framework the Whisky2D code will be developed, which solves the relativistic equations of hydrodynamics in axisymmetry. Therefore we consider an improved formulation of the conserved form of these equations. The second part will use the new code to investigate the critical behaviour of two colliding neutron stars. Considering the analogy to phase transitions in statistical physics, we will investigate the evolution of the entropy of the neutron stars during the whole process. A better understanding of the evolution of thermodynamical quantities, like the entropy in critical process, should provide deeper understanding of thermodynamics in relativity. More specifically, we have written the Whisky2D code, which solves the general-relativistic hydrodynamics equations in a flux-conservative form and in cylindrical coordinates. This of course brings in 1/r singular terms, where r is the radial cylindrical coordinate, which must be dealt with appropriately. In the above-referenced works, the flux operator is expanded and the 1/r terms, not containing derivatives, are moved to the right-hand-side of the equation (the source term), so that the left hand side assumes a form identical to the one of the three-dimensional (3D) Cartesian formulation. We call this the standard formulation. Another possibility is not to split the flux operator and to redefine the conserved variables, via a multiplication by r. We call this the new formulation. The new equations are solved with the same methods as in the Cartesian case. From a mathematical point of view, one would not expect differences between the two ways of writing the differential operator, but, of course, a difference is present at the numerical level. Our tests show that the new formulation yields results with a global truncation error which is one or more orders of magnitude smaller than those of alternative and commonly used formulations. The second part of the Thesis uses the new code for investigations of critical phenomena in general relativity. In particular, we consider the head-on-collision of two neutron stars in a region of the parameter space where two final states a new stable neutron star or a black hole, lay close to each other. In 1993, Choptuik considered one-parameter families of solutions, S[P], of the Einstein-Klein-Gordon equations for a massless scalar field in spherical symmetry, such that for every P > P⋆, S[P] contains a black hole and for every P < P⋆, S[P] is a solution not containing singularities. He studied numerically the behavior of S[P] as P → P⋆ and found that the critical solution, S[P⋆], is universal, in the sense that it is approached by all nearly-critical solutions regardless of the particular family of initial data considered. All these phenomena have the common property that, as P approaches P⋆, S[P] approaches a universal solution S[P⋆] and that all the physical quantities of S[P] depend only on |P − P⋆|. The first study of critical phenomena concerning the head-on collision of NSs was carried out by Jin and Suen in 2007. In particular, they considered a series of families of equal-mass NSs, modeled with an ideal-gas EOS, boosted towards each other and varied the mass of the stars, their separation, velocity and the polytropic index in the EOS. In this way they could observe a critical phenomenon of type I near the threshold of black-hole formation, with the putative solution being a nonlinearly oscillating star. In a successive work, they performed similar simulations but considering the head-on collision of Gaussian distributions of matter. Also in this case they found the appearance of type-I critical behaviour, but also performed a perturbative analysis of the initial distributions of matter and of the merged object. Because of the considerable difference found in the eigenfrequencies in the two cases, they concluded that the critical solution does not represent a system near equilibrium and in particular not a perturbed Tolmann-Oppenheimer-Volkoff (TOV) solution. In this Thesis we study the dynamics of the head-on collision of two equal-mass NSs using a setup which is as similar as possible to the one considered above. While we confirm that the merged object exhibits a type-I critical behaviour, we also argue against the conclusion that the critical solution cannot be described in terms of equilibrium solution. Indeed, we show that, in analogy with what is found in, the critical solution is effectively a perturbed unstable solution of the TOV equations. Our analysis also considers fine-structure of the scaling relation of type-I critical phenomena and we show that it exhibits oscillations in a similar way to the one studied in the context of scalar-field critical collapse. N2 - Diese Arbeit legt seinen Schwerpunkt auf die Physik von Neutronensternen und deren Beschreibung mit Methoden der numerischen Relativitätstheorie. Im ersten Schritt wird eine neue numerische Umgebung, der Whisky2D Code entwickelt, dieser löst die relativistischen Gleichungen der Hydrodynamik in Axialymmetrie. Hierzu betrachten wir eine verbesserte Formulierung der sog. "flux conserved formulation" der Gleichungen. Im zweiten Teil wird der neue Code verwendet , um das kritische Verhalten zweier kollidierenden Neutronensternen zu untersuchen. In Anbetracht der Analogie, um Übergänge in der statistischen Physik Phase werden wir die Entwicklung der Entropie der Neutronensterne während des gesamten Prozesses betrachten. Ein besseres Verständnis der Evolution von thermodynamischen Größen, wie der Entropie in kritischer Prozess, sollte zu einem tieferen Verständnis der relativistischen Thermodynamik führen. Der Whisky2D Code, zur Lösung Gleichungen relativistischer Hydrodynamik wurde in einer „flux conserved form“ und in zylindrischen Koordinaten geschrieben. Hierdurch entstehen 1 / r singuläre Terme, wobei r der ist, die entsprechend behandelt werden müssen. In früheren Arbeiten, wird der Operator expandiert und die 1 / r spezifisch Therme auf die rechte Seite geschrieben, so dass die linke Seite eine Form annimmt, die identisch ist mit der kartesischen Formulierung. Wir nennen dies die Standard-Formulierung. Eine andere Möglichkeit ist, die Terme nicht zu expandieren, den und den 1/r Term in die Gleichung hinein zu ziehen. Wir nennen dies die Neue-Formulierung. Die neuen Gleichungen werden mit den gleichen Verfahren wie im kartesischen Fall gelöst. Aus mathematischer Sicht ist keine Unterschiede zwischen den beiden Formulierungen zu erwarten, erst die numerische Sicht zeigt die Unterschiede auf. Versuche zeigen, dass die Neue-Formulierung numerische Fehler um mehrere Größenordnungen reduziert. Der zweite Teil der Dissertation verwendet den neuen Code für die Untersuchung kritischer Phänomene in der allgemeinen Relativitätstheorie. Insbesondere betrachten wir die Kopf-auf-Kollision zweier Neutronensterne in einem Bereich des Parameter Raums, deren zwei mögliche Endzustände entweder einen neuen stabilen Neutronenstern oder ein Schwarzes Loch darstellen. Im Jahr 1993, betrachtete Choptuik Ein-Parameter-Familien von Lösungen, S [P], der Einstein-Klein-Gordon-Gleichung für ein masseloses Skalarfeld in sphärischer Symmetrie, so dass für jedes P> P ⋆, S[P] ein Schwarzes Loch enthalten ist und jedes P

z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe. Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties. Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity. With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond. N2 - Die Materie zwischen den Galaxien im Universum, das sogenannte intergalaktische Medium, besteht zum größten Teil aus Wasserstoff, welcher sich zusammensetzt aus einem Proton und einem Elektron. Etwa ~10^8 Jahre nach dem Urknall änderte sich der Ionisationszustand des Wasserstoffs im intergalaktischen Medium. Durch Strahlung wurden Proton und Elektronen getrennt, der Wasserstoff wurde ionisiert. Die Strahlung mit der nötigen Energie um Wasserstoff zu ionisieren nennt man Lyman Kontinuum Strahlung. Woher diese stammt ist bis heute eine offene Frage. In der vorliegenden Arbeit diskutiere ich die wahrscheinlichsten Kandidaten für die Emission dieser ionisierenden Strahlung: die Lyman alpha Emitter (LAE), eine Gruppe von Galaxien die man im frühen Universum antrifft. Hat nämlich ein Lyman Kontinuum Photon ein Wasserstoffatom ionisiert, kommt es häufig vor, dass sich Proton und Elektron wieder zu einem neutralen Wasserstoffatom verbinden. Bei diesem Prozess wird dann ein Lyman alpha Photon freigesetzt, was den LAE ihren Namen gibt. Da wir in den Spektren dieser Galaxien die Lyman alpha Photonen beobachten können, deren Voraussetzung die Existenz von Lyman Kontinuum Emission in der Galaxie ist, liegt es nahe anzunehmen, dass die Lyman Kontinuum Emission auch in das intergalaktische Medium vordringen kann um den Wasserstoff dort ebenfalls zu ionisieren. Durch diesen Mechanismus sind Lyman alpha und Lyman-Kontinuumsstrahlung eng miteinander verbunden und werden in dieser Arbeit beide untersucht, um die Eigenschaften von Galaxien im frühen Universum und den Zustand des Wasserstoffs im intergalaktischen Medium besser zu verstehen. Der erste Schritt ist jedoch die Detektion und korrekte Klassifizierung von LAE. Dafür benutze ich Daten des Multi-Unit Spectroscopic Explorer (MUSE), ein Instrument mit dem Beobachtungen möglich sind, die zwei räumliche Dimensionen mit einer spektralen Dimension verbinden. Somit ist in jedem Pixel der Daten ein Spektrum zur Verfügung, in dem nach Emissionslinien gesucht werden kann. Nach der Detektion von Emissionslinien in den MUSE-Daten wird die Aufgabe der Klassifizierung von der grafischen Benutzeroberfläche QtClassify unterstützt, die ich in dieser Arbeit entwickelt habe. Sie bietet dem Benutzer eine schnelle und übersichtliche Identifizierung der gefundenen Emissionslinien, was einen entscheidenden ersten Schritt zur Analyse der Eigenschaften der LAE darstellt. Da Lyman alpha Photonen in neutralem Wasserstoff, der im Inneren von Galaxien in Gaswolken vorkommt, gestreut wird, verändert sich die Form der Lyman alpha Emissionslinie im Spektrum. Nachdem also die LAE mit Hilfe von QtClassify identifiziert werden konnten, analysiere ich die Lyman alpha Linie hinsichtlich ihrer Breite, ihrer Symmetrie und ihrer Stärke und suche nach Doppellinien, die Hinweise auf die Kinematik der Wasserstoff Gaswolken geben. Besonders wichtig dabei ist die Stärke der Linie im Vergleich zum restlichen Spektrum, die sogenannte Äquivalentbreite. Dabei zeige ich, dass die übliche Methode die Verteilung der Äquivalentbreiten als Histogramme darzustellen ohne die Detektionsgrenzen der Beobachtungen miteinzubeziehen keine Aussage über die Eigenschaften der LAE, sondern lediglich über die Grenzen der Beobachtungen treffen. Daher konstruiere ich eine unabhängigere Verteilungsfunktion, die diese Grenzen mit einbezieht. Ich verdeutliche dies durch einen Vergleich des Anteils von Objekten mit hoher Äquivalentbreite in zwei verschiedenen Datensätzen, die auf Beobachtungen mit unterschiedlicher Belichtungszeit beruhen. Dabei finde ich in dem Datensatz mit der kürzeren Belichtungszeit einen Anteil von ~20% an Objekten mit hohen Äquivalentbreiten (über >240A) und nur ~1% im Datensatz mit der zehnfach längeren Belichtungszeit obwohl die Eigenschaften der LAE gleich sind. Zudem finde ich eine Galaxie mit einer Äquivalentbreite der Lyman alpha Linie von 600 +- 110A, was auf eine ungewöhnliche Sternpopulation hindeutet. Als letzten Schritt suche ich in den klassifizierten LAE nach Lyman Kontinuum, was für die Ionisierung des Wasserstoffs im intergalaktischen Medium verantwortlich ist, und untersuche den Zusammenhang zwischen der Lyman alpha und der Lyman Kontinuumsstrahlung. Um das Lyman Kontinuum detektieren zu können benutze ich Daten des Hubble-Weltraumteleskops (HST) und finde sechs Lyman Kontinuum Kandidaten unter den LAE. Um zu testen ob die Lyman Kontinuumsstrahlung lediglich von diesen Objekten ausgeht oder auch im der Gesamtheit der LAE zu finden ist, addiere ich die Daten des HST und finde ein Signal, was darauf hindeutet, dass ~80% der Lyman Kontinuumsstrahlung aus den Galaxien entkommen und in das intergalaktische Medium vordringen kann. Wenn das gefundene Signal zuverlässig ist deutet es darauf hin, dass in der Tat LAE für die Ionisierung des Wasserstoffs im Universum verantwortlich sein könnten. KW - astronomy KW - LAEs KW - reionization KW - Lyman alpha KW - Lyman continuum KW - VLT/MUSE KW - emission line classification KW - QtClassify KW - LAEs KW - Lyman alpha KW - Lyman Kontinuum KW - QtClassify KW - VLT/MUSE KW - Astronomie KW - Emissionslinienklassifikation KW - Reionisierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-478816 ER - TY - THES A1 - Ketzer, Laura T1 - The impact of stellar activity evolution on atmospheric mass loss of young exoplanets T1 - Der Einfluss der stellaren Aktivitätsentwicklung auf den atmosphärischen Massenverlust von jungen Exoplaneten N2 - The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance. In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population. N2 - Die steigende Anzahl bekannter Exoplaneten wirft Fragen zu ihrer Demografie und den Mechanismen auf, die Planeten in ihre heutige beobachtete Form bringen. Junge Planeten, die sehr nah um ihren Wirtsstern kreisen, sind extremen Umgebungen ausgesetzt, da der Stern eine hohe magnetische Aktivität aufweist. Das führt wiederum dazu, dass der Planet einer enormen Röntgen- und Extrem-UV-Strahlung ausgesetzt ist. Ist der Planet über einen längeren Zeitraum dieser intensiven photoionisierenden Strahlung ausgesetzt, kann dies dazu führen, dass Planetenatmosphären sich aufheizen, ausdehnen und durch einen hydrodynamischen Entweichungsprozess namens Photoevaporation ins All entweichen, sozusagen verdampfen. Bei Planeten, in der Größenordnung von Super-Erden und Sub-Neptunen, kann dies sogar zur vollständigen Erosion ihrer Ur-Atmosphären führen. Ein interessanter Faktor, der für diesen Massenverlustprozess eine Rolle spielt, ist die Aktivitätsentwicklung des Wirtssterns. Die Rotation eines Sterns, die den Dynamo und damit die magnetische Aktivität antreibt, ändert sich im Laufe der Lebensdauer eines Sterns erheblich. Dies hat einen starken Einfluss auf die Menge der hochenergetischen Strahlung, den ein Planet mit zunehmendem Alter des Sterns empfängt. In jungen Jahren besitzen Planeten noch warme und ausgedehnte Hüllen, was sie besonders anfällig für atmosphärische Verdunstung macht. Insbesondere in den ersten Gigajahren, wenn die Röntgen- und UV-Strahlung 100 - 10,000 Mal höher sein kann als bei der heutigen Sonne, sind die Eigenschaften des Wirtssterns und die detaillierte Entwicklung seiner hochenergetischen Emission von Bedeutung. In dieser Arbeit untersuche ich die Auswirkungen der Entwicklung der stellaren Aktivität auf den durch hochenergetische Strahlung verursachten atmosphärischen Massenverlust junger Exoplaneten. Der PLATYPOS-Code wurde im Rahmen dieser Arbeit entwickelt, um die photoevaporativen Massenverlustraten für verschiedene stellare Alter zu berechnen. Der Code verknüpft parametrisierte Planetenmasse-Radius-Beziehungen mit einem analytischen Modell für den hydrodynamischen Massenverlust. Er wurde zusammen mit Chandra- und eROSITA-Röntgenbeobachtungen dazu verwendet, den zukünftigen Massenverlust der beiden jungen Mehrplanetensysteme V1298 Tau und K2-198 zu untersuchen. Darüber hinaus wurde in einer numerischen Ensemblestudie erstmals der Effekt einer realistischen Verteilung von stellaren Aktivitäts-Tracks auf das sogenannte Radius-Tal bei kleinen Planeten untersucht. Die Arbeiten in dieser Dissertation zeigen, dass für einzelne Systeme, insbesondere wenn die Planetenmassen unbestimmt sind, der Unterschied zwischen einem jungen Wirtsstern, der einem Track mit niedriger Aktivität gegenüber einem solchen mit hoher Aktivität folgt, gravierende Auswirkungen haben kann: Die genaue Form der Aktivitätsentwicklung kann darüber entscheiden, ob ein Planet einen Teil seiner Atmosphäre behält oder seine Hülle vollständig verliert und nur den nackten Gesteinskern behält. Für ein Ensemble von simulierten Planeten ändert eine durch Beobachtungen motivierte Verteilung von Aktivitäts-Tracks die endgültige Radiusverteilung der Planeten nach mehreren Gigajahren nicht wesentlich. Meine Simulationen deuten darauf hin, dass die Form und Steigung des sich ergebenden Radius-Tals bei Kleinplaneten nicht wesentlich von der Streuung der stellaren Aktivitäts-Tracks beeinflusst wird. Eine gewisse Streuung oder Unschärfe im Radius-Tal der beobachteten Exoplanetenpopulation kann damit allerdings durchaus erklärt werden. KW - Exoplaneten KW - star-planet interaction KW - stellar physics KW - exoplanets KW - exoplanet atmospheres KW - Sternphysik KW - Stern-Planeten-Wechselwirkung KW - Exoplanetenatmosphären Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-626819 ER - TY - THES A1 - Kim, Jiyong T1 - Synthesis of InP quantum dots and their applications N2 - Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD–LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III–V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis–mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III–V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically. N2 - Umweltfreundliche InP Quantenpunkte (QDs) sind technologisch relevant und werden typischerweise als grüne und rote Emitter in Bildschirmen verwendet. Nach dem Stand der Technik kann eine sorgfältig hergestellte Kern-Schale-Heterostruktur (ZnSe innen/ZnS außen) zu außergewöhnlich hohen Photolumineszenz-Quantenausbeuten (PL-QYs) von nahezu Eins (95 - 100 %) führen. Dennoch gibt es bisher nur einige wenige industrielle Anwendungen wie QD-Flüssigkristall-Bildschirme (liquid crystal display, QD-LCD), in denen die Anregung durch eine blaue Hintergrundbeleuchtung realisiert wird. Dabei haben QDs aufgrund ihrer Modifizierbarkeit noch viele weitere industrielle Einsatzmöglichkeiten, beispielsweise QD basierte lichtemittierende Dioden (QD-LEDs) und lumineszierende Solarkollektoren (luminescence solar concentrator, LSC). Vor dem Hauptteil werden in den Kapiteln 1 und 2 die Grundlagen von QDs und die theoretischen Grundlagen basierend auf quantenmechanischer Beschreibung und experimentellen Ergebnissen eingeführt. Zum besseren Verständnis werden: das Konzept der QDs, kolloidale QDs, Kern-Schale-Strukturen vom Typ I, mit Übergangsmetallen dotierte Halbleiter-QDs, die Oberflächenchemie von QDs und ihre Anwendungen (LSC, QD-LEDs und electrohydrodynamic EHD-Jet-Printing), nacheinander eingeführt. Der Schwerpunkt dieser Doktorarbeit liegt hauptsächlich auf der Kombination von QD-Materialien und QD-Bauelementen, basierend auf der Synthese von InP QDs mit einem anorganischen Kern (Kern-Schale-Heterostruktur) und einer organischen Hülle (Oberflächenliganden auf der QD-Oberfläche). In die Kern-Schale-Heterostruktur wird eine ZnCuInS-Mittelschale als Zwischenschicht zwischen einem Cu-dotierten InP Kern und einer ZnS-Schale für LSC-Bauelemente neu eingeführt. Bei den Oberflächenliganden wird der Ligandeneffekt von 1-Oktanthiol und Chloridionen auf die Stabilität von QD-LEDs und die Druckbarkeit mit EHD-Jet-Printing hin untersucht. Dabei erhält der Protonentransfermechanismus auf der QD-Oberfläche ein besonderes Augenmerk. In Kapitel 3 wird die Eintopfsynthese von hocheffizient emittierenden QDs mit einer Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS Kern/Schale/Schale-Heterostruktur beschrieben. Wenn diese neuartige Kombination einer ZCIS/ZnS-Doppelschalenstruktur mit eine Reihe von Cu:InP-Kerne mit unterschiedlichen Größen kombiniert wird, ergeben die daraus entstehenden Cu:InP/ZCIS/ZnS-QDs die bisher höchsten publizierten PL-QYs von 71,5 – 82,4 % im nahen IR-Bereich von 694 – 850 nm mit einstellbarer PL Wellenlänge. Diese Ergebnisse weisen auf die Wirksamkeit der ZCIS-Zwischenschicht hin, welche die Grenzflächenspannung zwischen Kern und Schale effektiv mildert und damit zu einem solch hohen Emissionsvermögen führt. Diese ZCIS-Zwischenschicht wird durch vergleichende Größen-, Struktur- und Zusammensetzungsanalysen weiter untersucht. Am Ende des Kapitels wird der aktuellen Stand der Forschung auf dem Gebiet der LSC-Bauelemente aus solchen Cu:InP/ZCIS/ZnS-QDs vorgestellt. Kapitel 4 befasst sich hauptsächlich mit dem Ligandeneffekt bei der Passivierung mit 1-Oktanthiol von InP/ZnSe/ZnS-QDs im Hinblick auf die unvollständige Oberflächenpassivierung während der Synthese. Es fehlen anionischen Carboxylat-Liganden auf der InP/ZnSe/ZnS-Oberfläche der QDs, an denen Zink Carboxylat Liganden durch Protonentransfer vom 1-Oktanthiol in Carbonsäure-Liganden umgewandelt werden könnten. Die so synthetisierten QDs haben zunächst eine unterkoordinierte Oberfläche mit Leerstellen, die durch Lösungsmittel-Liganden wie Ethanol oder Aceton passiviert werden. Wenn 1-Octanthiol an die QD-Oberfläche bindet bewirkt der Protonentransfer die Bindung von Carboxylat-Liganden (aus Zink-Carboxylat) an die Oberfläche, wobei Ethanol- oder Aceton-Liganden ausgetauscht werden. Systematische Analysen wie Thermogravimetrie (thermogravimetric analysis TGA), Massenspektrometrie (MS) und Protonen-Kernmagnetresonanz (proton nuclear magnetic resonance 1H-NMR) zeigen direkt den Zusammenhang zwischen Oberflächenliganden und QD-LEDs. Kapitel 5 zeigt den Zusammenhang zwischen der Materialstabilität von QDs und der Bauteilstabilität von QD-LEDs durch Untersuchung der Oberflächenchemie und der Schalendicke. In typischen kolloidalen III-V-InP-QDs wird eine anorganische ZnS-Außenhülle auf den InP Kern aufgetragen, um Stabilität zu gewährleisten. In dieser Arbeit wird jedoch eine schnellere Photodegradation von InP/ZnSe/ZnS-QDs mit einer dickeren statt einer dünneren ZnS-Schale gezeigt, wenn 1-Oktanthiol als Schwefelquelle zur Bildung der äußersten ZnS-Schale verwendet wurde. 1-Oktanthiol induziert die Bildung eines schwach gebundenen Carboxylatliganden durch Protonentransfer auf der QD-Oberfläche, was zu einem schnelleren Abbau unter UV-Licht trotz dickerer ZnS-Schale führt. Detailliertere Einblicke in die Oberflächenchemie werden durch 1H-NMR, TGA und MS gewonnen. Überraschenderweise zeigen jedoch die Lebensdauern der aus InP/ZnSe/ZnS-QDs mit dicken oder dünnen ZnS-Hüllen hergestellten EL-Bauelemente eine gegenteilige Stabilität: Die QD-LEDs mit QDs mit dicker ZnS-Hülle haben eine längere Lebensdauer, als jene mit dünner ZnS-Hülle. Es wird der Degradationsmechanismus der QDs und der QD-Leuchtdioden anhand der Ergebnisse erläutert und der Effekt auf die unterschiedlichen Lebensdauern von Material und Bauteil diskutiert. In Kapitel 6 wird eine Methode vorgeschlagen, wie die Druckbarkeit von QD-Tintenformulierungen beim EHD-Jet-Druck über die QD-Materialien verbessert werden kann. Dazu werden InP-QDs mit GaP-Zwischenschalen erweitert, um die Oberflächenladung zu beeinflussen. Darüber hinaus verbessern GaP-Zwischenschalen in III-V kolloidalen InP-QDs deren thermische Stabilität und PL-QY im Falle von Typ-I-Kern/Schale/Schale-Heterostrukturen (InP/GaP/ZnSeS-QDs). Diese stark lumineszierenden InP/GaP/ZnSeS-QDs wurden synthetisiert und für den EHD-Jet-Druck verwendet. Nicht umgesetzte Ga und Cl-Ionen auf der QD-Oberfläche reduzieren die benötigte Betriebsspannung zur Ausbildung eines Taylor-Kegels und eines stabilen Tinten-Jets. Dieses Ergebnis deutet darauf hin, dass die Oberflächenladungen der Quantenpunkte eine wichtige Rolle bei der Ausbildung des Taylor-Kegels spielen. Mittels Zeta-Potenzial-Messung von QD-Tinten wurde eine industriell erprobte und einfache Methode zur Untersuchung der Oberflächenladungen verwendet. Darüber hinaus wurde optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma (inductively coupled plasma-atomic emission spectroscopy ICP-OES) zur Bestimmung der Elementzusammensetzung durchgeführt. Diese Dissertation beschäftigt sich sowohl mit der Synthese von hocheffizienten InP QDs mit schmalbandiger Emission (full width at half maximum FWHM), als auch den Zusammenhängen zwischen QD-Material und QD-Bauelementen. Die Ergebnisse sind einerseits relevant für die breitere industrielle Anwendung dieser Materialien und andererseits für ein tieferes chemisch-physikalisches, theoretisches und experimentelles Verständnis der Prozesse, die zu langlebigen und stabilen Bauelementen führen. KW - colloidal quantum dot KW - Cu doped InP KW - surface chemistry KW - QD stability KW - QD device KW - kolloidaler Quantenpunkt KW - Cu-dotiertes InP KW - Oberflächenchemie KW - QD-Stabilität KW - QD-Gerät Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585351 ER - TY - THES A1 - Kluth, Oliver T1 - Einfluss von Glucolipotoxizität auf die Funktion der β-Zellen diabetessuszeptibler und –resistenter Mausstämme T1 - Effects of glucolipotoxicity on beta-cells of diabetes-susceptible and diabetes-resistant mouse strains N2 - Ziel der vorliegenden Arbeit war es, die Auswirkungen von Glucose- und Lipidtoxizität auf die Funktion der β-Zellen von Langerhans-Inseln in einem diabetesresistenten (B6.V-Lepob/ob, ob/ob) sowie diabetessuszeptiblen (New Zealand Obese, NZO) Mausmodell zu untersuchen. Es sollten molekulare Mechanismen identifiziert werden, die zum Untergang der β-Zellen in der NZO-Maus führen bzw. zum Schutz der β-Zellen der ob/ob-Maus beitragen. Zunächst wurde durch ein geeignetes diätetisches Regime in beiden Modellen durch kohlenhydratrestriktive Ernährung eine Adipositas(Lipidtoxizität) induziert und anschließend durch Fütterung einer kohlenhydrathaltigen Diät ein Zustand von Glucolipotoxizität erzeugt. Dieses Vorgehen erlaubte es, in der NZO-Maus in einem kurzen Zeitfenster eine Hyperglykämie sowie einen β-Zelluntergang durch Apoptose auszulösen. Im Vergleich dazu blieben ob/ob-Mäuse längerfristig normoglykämisch und wiesen keinen β-Zelluntergang auf. Die Ursache für den β-Zellverlust war die Inaktivierung des Insulin/IGF-1-Rezeptor-Signalwegs, wie durch Abnahme von phospho-AKT, phospho-FoxO1 sowie des β-zellspezifischen Transkriptionsfaktors PDX1 gezeigt wurde. Mit Ausnahme des Effekts einer Dephosphorylierung von FoxO1, konnten ob/ob-Mäuse diesen Signalweg aufrechterhalten und dadurch einen Verlust von β-Zellen abwenden. Die glucolipotoxischen Effekte wurden in vitro an isolierten Inseln beider Stämme und der β-Zelllinie MIN6 bestätigt und zeigten, dass ausschließlich die Kombination hoher Glucose und Palmitatkonzentrationen (Glucolipotoxizität) negative Auswirkungen auf die NZO-Inseln und MIN6-Zellen hatte, während ob/ob-Inseln davor geschützt blieben. Die Untersuchung isolierter Inseln ergab, dass beide Stämme unter glucolipotoxischen Bedingungen keine Steigerung der Insulinexpression aufweisen und sich bezüglich ihrer Glucose-stimulierten Insulinsekretion nicht unterscheiden. Mit Hilfe von Microarray- sowie immunhistologischen Untersuchungen wurde gezeigt, dass ausschließlich ob/ob-Mäuse nach Kohlenhydratfütterung eine kompensatorische transiente Induktion der β-Zellproliferation aufwiesen, die in einer nahezu Verdreifachung der Inselmasse nach 32 Tagen mündete. Die hier erzielten Ergebnisse lassen die Schlussfolgerung zu, dass der β-Zelluntergang der NZO-Maus auf eine Beeinträchtigung des Insulin/IGF-1-Rezeptor-Signalwegs sowie auf die Unfähigkeit zur β- Zellproliferation zurückgeführt werden kann. Umgekehrt ermöglichen der Erhalt des Insulin/IGF-1-Rezeptor-Signalwegs und die Induktion der β-Zellproliferation in der ob/ob-Maus den Schutz vor einer Hyperglykämie und einem Diabetes. N2 - The aim of the project was to investigate the impact of glucose- and fatty acid toxicity on β-cell function in a diabetes susceptible (New Zealand Obese, NZO) and resistant (B6.V-Lepob/ob, ob/ob)mouse model. Specifically, the molecular mechanisms of glucolipotoxicity-induced β-cell failure in the NZO mouse and pathways which contribute to protection of ob/ob mice against diet-induced type 2 diabetes should be elucidated. First, the animals were fed a fat-enriched carbohydrate-free diet which resulted in severe obesity and insulin resistance (lipotoxicity). Subsequently, mice were exposed to a carbohydrate-containing diet to induce conditions of glucolipotoxicity. This sequential dietary regimen provides a convenient method to induce rapid hyperglycaemia with β-cell destruction by apoptosis in a short time frame in NZO mice. In contrast, long-term exposure of ob/ob mice to the same dietary regimen leads to normoglycaemia and a protection against β-cell failure. The molecular mechanism behind carbohydrate-mediated β-cell destruction in NZO mice was an inactivation of the insulin/IGF-1 receptor signaling pathway including loss of phospho-AKT, phospho-FoxO1 and of the β-cell specific transcription factor PDX1. With the exception of FoxO1-dephosphorylation, ob/ob mice maintained this survival pathway and therefore were protected against loss of β-cells. The adverse effects of glucolipotoxicity on β-cells were verified in vitro by treatment of isolated NZO-islets and MIN6-cells under glucolipotoxic conditions. Only the combination of high glucose in the presence of palmitate caused deterioration of NZO-islets and MIN6-cells whereas ob/ob-islets were protected. The investigation of the insulin expression pattern showed, that glucolipotoxic conditions inhibited a glucose-induced increase in insulin expression in both, NZO and ob/ob islets. Furthermore, NZO and ob/ob-islets did not differ in glucose-stimulated insulin secretion. Expression profiling and immunohistochemical analyses of islets from NZO and ob/ob mice before and after carbohydrate intervention revealed a transient induction of a compensatory β-cell proliferation. During a 32 day carbohydrate feeding islet mass of ob/ob mice increased almost 3-fold. In conclusion, β-cell failure in NZO mice was induced via impairment of the insulin/IGF-1 signaling pathway and the inability to adequately increase β-cell mass by proliferation. Conversely, maintenance of the insulin/IGF-1 receptor signaling pathway and the induction of β-cell proliferation protected ob/ob mice against hyperglycaemia and type 2 diabetes. KW - Glucolipotoxizität KW - Beta-Zelle KW - NZO KW - ob/ob KW - Diabetes KW - glucolipotoxicity KW - beta-cell KW - NZO KW - ob/ob KW - diabetes Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-61961 ER - TY - THES A1 - Krause, Jette T1 - An expert-based Bayesian investigation of greenhouse gas emission reduction options for German passenger vehicles until 2030 T1 - Eine Expertenbasierte Bayesianische Untersuchung von Möglichkeiten zur Reduktion der Treibhausgasemissionen der Deutschen Neuwagenflotte bis 2030 N2 - The present thesis introduces an iterative expert-based Bayesian approach for assessing greenhouse gas (GHG) emissions from the 2030 German new vehicle fleet and quantifying the impacts of their main drivers. A first set of expert interviews has been carried out in order to identify technologies which may help to lower car GHG emissions and to quantify their emission reduction potentials. Moreover, experts were asked for their probability assessments that the different technologies will be widely adopted, as well as for important prerequisites that could foster or hamper their adoption. Drawing on the results of these expert interviews, a Bayesian Belief Network has been built which explicitly models three vehicle types: Internal Combustion Engine Vehicles (which include mild and full Hybrid Electric Vehicles), Plug-In Hybrid Electric Vehicles, and Battery Electric Vehicles. The conditional dependencies of twelve central variables within the BBN - battery energy, fuel and electricity consumption, relative costs, and sales shares of the vehicle types - have been quantified by experts from German car manufacturers in a second series of interviews. For each of the seven second-round interviews, an expert's individually specified BBN results. The BBN have been run for different hypothetical 2030 scenarios which differ, e.g., in regard to battery development, regulation, and fuel and electricity GHG intensities. The present thesis delivers results both in regard to the subject of the investigation and in regard to its method. On the subject level, it has been found that the different experts expect 2030 German new car fleet emission to be at 50 to 65% of 2008 new fleet emissions under the baseline scenario. They can be further reduced to 40 to 50% of the emissions of the 2008 fleet though a combination of a higher share of renewables in the electricity mix, a larger share of biofuels in the fuel mix, and a stricter regulation of car CO$_2$ emissions in the European Union. Technically, 2030 German new car fleet GHG emissions can be reduced to a minimum of 18 to 44% of 2008 emissions, a development which can not be triggered by any combination of measures modeled in the BBN alone but needs further commitment. Out of a wealth of existing BBN, few have been specified by individual experts through elicitation, and to my knowledge, none of them has been employed for analyzing perspectives for the future. On the level of methods, this work shows that expert-based BBN are a valuable tool for making experts' expectations for the future explicit and amenable to the analysis of different hypothetical scenarios. BBN can also be employed for quantifying the impacts of main drivers. They have been demonstrated to be a valuable tool for iterative stakeholder-based science approaches. N2 - Die vorliegende Arbeit verfolgt zwei Forschungsziele - ein inhaltliches und ein methodisches. Auf der inhaltlichen Ebene wurde die Entwicklung der CO2-Emissionen der deutschen Neuwagenflotte bis 2030 untersucht. Es wurden verschiedene technische Möglichkeiten daraufhin überprüft, inwieweit sie zur Emissionsminderung beitragen können, wie wahrscheinlich es ist, dass sie umgesetzt werden, und welche Voraussetzungen und Rahmenbedingungen bedeutenden Einfluß haben. Die methodische Innovation dieser Arbeit besteht darin, subjektive Einschätzungen von Experten mit einem Bayesianischen Netzwerk zu verknüpfen, um die Anwendung solcher Netzwerke auf Situationen von Unsicherheit im Knight'schen Sinne zu erweitern, hier am Beispiel der zukünftigen, heute nicht vorhersagbaren Entwicklung der CO2-Emissionen der deutschen Neuwagenflotte. Ein erster Schritt dieser Untersuchung bestand in der Erhebung und Auswertung der Einschätzungen von 15 Experten in Bezug auf die Möglichkeiten, die CO2-Emissionen neuer PKW in Deutschland bis 2020 zu senken. Erhoben wurden Aussagen über verfügbare Technologien, ihre Einsparpotenziale, ihre Umsetzungswahrscheinlichkeiten sowie wichtige Rahmenbedingungen. Ziel war es, wesentliche Variablen und deren Abhängigkeiten zu identifizieren, um eine Grundlage für die spätere Modellierung zu schaffen. Um die Untersuchung auf eine breite Basis zu stellen, wurden Experten von Autobauern und Zulieferern, Nichtregierungsorganisationen, Verbänden sowie solche aus Wissenschaft und Journalismus einbezogen. Aufbauend auf diesen Ergebnissen wurde in einem zweiten Schritt ein Bayesianisches Netzwerk entwickelt, mit dem die CO2-Emissionen der deutschen Neuwagenflotte im Jahr 2030 quantifiziert werden können. Außerdem sollten die Marktchancen verschiedener Fahrzeugtypen untersucht werden. Ein weiteres Ziel war es, den Einfluss verschiedener technologischer und regulatorischer Einflussfaktoren zu quantifizieren, die in der ersten Interviewrunde identifiziert worden waren. Gegenüber der ersten Interviewrunde wurde der zeitliche Rahmen der Untersuchung um 10 Jahre auf das Jahr 2030 erweitert. Das Bayesianische Netz erstreckt sich auf die zukünftigen Eigenschaften und Marktchancen von drei Fahrzeugtypen: Verbrennungsmotorische Fahrzeuge einschließlich aller Hybridvarianten bis hin zum Vollhybrid, Plug-In Hybride und Batterie-Elektrofahrzeuge. Das Netzwerk umfasst 46 miteinander verknüpfte Variablen. Für zwölf entscheidende Variablen wurden per Expertenbefragung bedingte Wahrscheinlichkeiten erhoben. Befragt wurden sieben Experten, fast alle hochrangige F&E- oder Umweltexperten bei deutschen Autobauern. Für jeden Experten entstand ein individuell quantifiziertes Netzwerk. Um mögliche Technologie- und Emissionspfade zu untersuchen, wurden verschiedene Szenarien definiert, die unterschiedliche Regulierungen, Batterie-Entwicklungspfade und CO2-Intensitäten von Treibstoffen und elektrischer Energie in Betracht ziehen. Im Basis-Szenario liegen die Erwartungswerte der CO2-Emissionen der deutschen Neuwagenflotte 2030 nach Einschätzung der Experten bei 50 bis 65% der Emissionen der Neuwagenflotte 2008. Kombiniert man einen gesteigerten Anteil erneuerbarer Energien im Strommix, einen größeren Anteil von Biotreibstoffen im Treibstoff-Mix und eine strengere CO2-Emissionsregulierung seitens der Europäischen Union, liegen die erwarteten Emissionen der Neuwagenflotte 2030 bei 40 bis 50% der Emissionen der Neuwagen 2008. Die Erwartungswerte der Neuflotten-Emissionen 2030 können in den verschiedenen BBN auf minimale Werte von 18 bis 44% der Emissionen der deutschen Neuwagenflotte von 2008 festgelegt werden. Es ist in den BBN durchaus möglich, aber in den betrachteten Szenarien unwahrscheinlich, die Emissionen so stark zu senken. Neben der Untersuchung von Fahrzeugtechnologien und CO2-Emissionen bis 2030 verfolgte die vorliegende Arbeit das Ziel, eine innovative Methode zu erproben. Es hat meines Wissens bisher kein Experten-basiertes BBN gegeben, das zukünftige Entwicklungen untersucht. Eine weitere Besonderheit des Ansatzes ist, dass für jeden Experten ein eigenes BBN quantifiziert wurde, so dass eine Schar von Netzwerken entstanden ist, deren Aussagen verglichen werden können. Dadurch war es möglich, die Bandbreite der Erwartungen verschiedener Experten abzuleiten und festzustellen, wo Erwartungen relativ konsistent sind, und wo sie weit auseinander liegen. Daraus lassen sich wertvolle Schlüsse ableiten, an welchen Punkten weitere Forschung besonders erfolgversprechend ist. BBN haben sich damit als nützliches Werkzeug für Stakeholder-basierte iterative Forschungsprozesse erwiesen. Insgesamt hat es sich als fruchtbarer neuer Ansatz erwiesen, Experten-basierte Bayesianische Netzwerke zur Untersuchung zukünftiger Entwicklungsmöglichkeiten heranzuziehen. Die Methode ermöglicht es auch, den Einfluß von Rahmenbedingungen zu bestimmen. KW - Bayesianismus KW - Bayesianisches Netzwerk KW - Treibhausgasemissionen KW - Pkw KW - Stakeholder-basierte Forschung KW - Bayesianism KW - Bayesian Network KW - Greenhouse Gas Emissions KW - Cars KW - Stakeholder-based Science Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57671 ER - TY - THES A1 - Kruse, Marlen T1 - Characterization of biomolecules and their interactions using electrically controllable DNA nanolevers N2 - In this work, binding interactions between biomolecules were analyzed by a technique that is based on electrically controllable DNA nanolevers. The technique was applied to virus-receptor interactions for the first time. As receptors, primarily peptides on DNA nanostructures and antibodies were utilized. The DNA nanostructures were integrated into the measurement technique and enabled the presentation of the peptides in a controllable geometrical order. The number of peptides could be varied to be compatible to the binding sites of the viral surface proteins. Influenza A virus served as a model system, on which the general measurability was demonstrated. Variations of the receptor peptide, the surface ligand density, the measurement temperature and the virus subtypes showed the sensitivity and applicability of the technology. Additionally, the immobilization of virus particles enabled the measurement of differences in oligovalent binding of DNA-peptide nanostructures to the viral proteins in their native environment. When the coronavirus pandemic broke out in 2020, work on binding interactions of a peptide from the hACE2 receptor and the spike protein of the SARS-CoV-2 virus revealed that oligovalent binding can be quantified in the switchSENSE technology. It could also be shown that small changes in the amino acid sequence of the spike protein resulted in complete loss of binding. Interactions of the peptide and inactivated virus material as well as pseudo virus particles could be measured. Additionally, the switchSENSE technology was utilized to rank six antibodies for their binding affinity towards the nucleocapsid protein of SARS-CoV-2 for the development of a rapid antigen test device. The technique was furthermore employed to show binding of a non-enveloped virus (adenovirus) and a virus-like particle (norovirus-like particle) to antibodies. Apart from binding interactions, the use of DNA origami levers with a length of around 50 nm enabled the switching of virus material. This proved that the technology is also able to size objects with a hydrodynamic diameter larger than 14 nm. A theoretical work on diffusion and reaction-limited binding interactions revealed that the technique and the chosen parameters enable the determination of binding rate constants in the reaction-limited regime. Overall, the applicability of the switchSENSE technique to virus-receptor binding interactions could be demonstrated on multiple examples. While there are challenges that remain, the setup enables the determination of affinities between viruses and receptors in their native environment. Especially the possibilities regarding the quantification of oligo- and multivalent binding interactions could be presented. N2 - In dieser Arbeit wurden Bindungsinteraktionen zwischen biologischen Molekülen mit Hilfe von elektrisch kontrollierbaren DNA-Nanohebeln untersucht. Die Technologie wurde zum ersten Mal auf Virus-Rezeptor Interaktionen angewendet. Als Rezeptoren wurden überwiegend Peptide und Antikörper untersucht. Die Peptide wurden auf vierarmigen DNA-Nanohebeln angeordnet. Ihre geometrische Anordnung entsprach der Anordnung der Rezeptorbindungsstellen der Proteine auf der Virusoberfläche. An Influenza A Viren wurde die Machbarkeit der Bindungsmessung zuerst demonstriert. Dabei konnte die Anwendbarkeit und Sensitivität der Technologie durch Variation der Peptide, der Ligandendichte auf der Sensoroberfläche, der Messtemperatur und der Virussubtypen gezeigt werden. Weiterhin wurde Virusmaterial auf der Sensoroberfläche immobilisiert und anschließend wurden quantitative Bindungsmessungen mit den oligovalenten DNA-Peptid-Strukturen durchgeführt. Dieser Versuchsaufbau ermöglichte die Messung der Bindungsstärke in Abhängigkeit der Anzahl der pro DNA-Struktur gekoppelten Peptide. Im Zuge des Ausbruchs der Coronavirus-Pandemie im Jahr 2020 wurden Bindungsinteraktionsmessungen zwischen einem Peptid aus dem hACE2-Rezeptor und SARS-CoV-2 Spike Proteinen durchgeführt. Auch hier konnten oligovalente Bindungseffekte quantifiziert werden. Außerdem wurde festgestellt, dass Veränderungen an der Aminosäuresequenz des SARS-CoV-2 Proteins starke Auswirkungen auf das Bindungsverhalten hatten. Auch Interaktionen zwischen dem Peptid und sowohl inaktiviertem Virusmaterial als auch Pseudoviruspartikeln wurden gemessen. Für die Entwicklung eines Antigenschnelltests wurden die Affinitäten von sechs Antikörpern an das Nucleocapsidprotein des SARS-CoV-2 bestimmt. Weiterhin konnte gezeigt werden, dass mit der Technologie auch die Bindung von unbehüllten Viren (am Beispiel von Adenoviren) und Virus-ähnlichen Partikeln (am Beispiel von Norovirus-ähnlichen Partikeln) an Antikörper vermessen werden kann. Neben Bindungsinteraktionen, wurden auch Größenbestimmungen mit Hilfe von DNA Origamis durchgeführt. Die Hebellänge von ca. 50 nm ermöglichte die elektrische Bewegung ("switching") von Virusmaterial. Es konnte so gezeigt werden, dass die Technologie es ermöglicht, Objekte mit einem hydrodynamischen Durchmesser von mehr als 14 nm zu bewegen. In einer theoretischen Betrachtung der Experimente konnte gezeigt werden, dass der Sensoraufbau und die verwendeten Parameter die Messung von Bindungsratenkonstanten in einem Reaktions-limitierten Bereich ermöglichen. Insgesamt konnte die Arbeit an vielen Beispielen zeigen, dass die switch-SENSE Technologie für die Messung von Virus-Rezeptor Interaktionen geeignet ist. Während es weiterhin Herausforderungen gibt, so ermöglicht der Aufbau doch die Bestimmung von Affinitäten zwischen Viren und Rezeptoren. Insbesondere die Möglichkeiten zur Quantifizierung von oligo- und multivalenten Bindungsinteraktionen konnten aufgezeigt werden. T2 - Charakterisierung von Biomolekülen und deren Interaktionen mittels elektrisch kontrollierbarer DNA Nanohebel KW - biomolecule KW - binding interactions KW - switchSENSE KW - virus KW - receptor KW - Biomoleküle KW - Bindungsinteraktion KW - switchSENSE Technologie KW - Virus KW - Rezeptor Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577384 ER - TY - THES A1 - Kugel, Rudolf T1 - Ein Beitrag zur Problematik der Integration virtueller Maschinen T1 - A contribution to the problem of integrating virtual machines N2 - Moderne Softwaresysteme sind komplexe Gebilde, welche häufig im Verbund mit anderen technischen und betriebswirtschaftlichen Systemen eingesetzt werden. Für die Hersteller solcher Systeme stellt es oft eine große Herausforderung dar, den oft weit reichenden Anforderungen bezüglich der Anpassbarkeit solcher Systeme gerecht zu werden. Zur Erfüllung dieser Anforderungen hat es sich vielfach bewährt, eine virtuelle Maschine in das betreffende System zu integrieren. Die Dissertation richtet sich insbesondere an Personen, die vor der Aufgabe der Integration virtueller Maschinen in bestehende Systeme stehen und zielt darauf ab, solche für die Entscheidung über Integrationsfragen wichtigen Zusammenhänge klar darzustellen. Typischerweise treten bei der Integration einer virtuellen Maschine in ein System eine Reihe unterschiedlicher Problemstellungen auf. Da diese Problemstellungen oft eng miteinander verzahnt sind, ist eine isolierte Betrachtung meist nicht sinnvoll. Daher werden die Problemstellungen anhand eines zentral gewählten, sehr umfangreichen Beispiels aus der industriellen Praxis eingeführt. Dieses Beispiel hat die Integration der "Java Virtual Machine" in den SAP R/3 Application Server zum Gegenstand. Im Anschluss an dieses Praxisbeispiel wird die Diskussion der Integrationsproblematik unter Bezug auf eine Auswahl weiterer, in der Literatur beschriebener Integrationsbeispiele vertieft. Das Hauptproblem bei der Behandlung der Integrationsproblematik bestand darin, dass die vorgefundenen Beschreibungen, der als Beispiel herangezogenen Systeme, nur bedingt als Basis für die Auseinandersetzung mit der Integrationsproblematik geeignet waren. Zur Schaffung einer verwertbaren Diskussionsgrundlage war es daher erforderlich, eine homogene, durchgängige Modellierung dieser Systeme vorzunehmen. Die Modellierung der Systeme erfolgte dabei unter Verwendung der "Fundamental Modeling Concepts (FMC)". Die erstellten Modelle sowie die auf Basis dieser Modelle durchgeführte Gegenüberstellung der unterschiedlichen Ansätze zur LÖsung typischer Integrationsprobleme bilden den Hauptbeitrag der Dissertation. Im Zusammenhang mit der Integration virtueller Maschinen in bestehende Systeme besteht häufig der Bedarf, zeitgleich mehrere "Programme" durch die integrierte virtuelle Maschine ausführen zu lassen. Angesichts der Konstruktionsmerkmale vieler heute verbreiteter virtueller Maschinen stellt die Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" eine große Herausforderung dar. Die Darstellung des Spektrums an Maßnahmen zur Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" bildet einen zweiten wesentlichen Beitrag der Dissertation. N2 - Modern software systems are complex entities which are frequently linked to other technical and economic systems. For the manufacturers of such systems it often represents a big challenge to fulfill the demanding requirements concerning the adaptability of such systems. One possible way to meet the demands is to integrate a virtual machine into the system concerned. This thesis is primarily intended to be used by persons who intend to integrate a virtual machine into an existing system. The primary goal is to pinpoint those dependencies which are important for decisions about integration questions. The integration of a virtual machine into an existing system is typically accompanied by many different problems. Since these problems are often closely interconnected, it often makes no sense to treat them individually. Therefore, the problems are introduced along with an adequately chosen, complex real life example. This example deals with the integration of the "Java Virtual Machine" into the "SAP R/3" application server. Following this practical example, the discussion of integration problems is deepened by presenting an assortment of additional examples taken from the literature. The main problem encountered during the treatment of the integration process was caused by inadequate and incomparable descriptions of the samples used. The existing descriptions were therefore unsuitable as a basis of discussion for the integration topic. For a useful discussion, it was necessary to prepare a uniform and sound modeling of these systems. This was done by adopting the "Fundamental Modeling Concepts (FMC)" technique. The created models as well as the comparison of the different approaches that can be used to solve typical integration problems form the main contribution of the thesis. The integration of virtual machines into existing systems is frequently accompanied by the requirement to have the integrated virtual machine process several "programs" simultaneously. In view of the design features of many common virtual machines, the realization of a virtual machine integration that allows the integrated virtual machine to be operated in "multiprogram" mode is still challenging. The most challenging task in this context is the problem of keeping the resource usage of the system at a tolerable level. A comparison of measures that can be taken to reduce the resource usage of an integrated virtual machine that can be operated in "multiprogram" mode forms a second essential contribution of the thesis. KW - Virtuelle Maschine KW - VM KW - Java Virtual Machine KW - Java 2 Enterprise Edition KW - IBM 360 KW - VM Integration KW - Application Server KW - Fundamental Modeling Concepts KW - PAVM Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7195 ER - TY - THES A1 - Latnikova, Alexandra T1 - Polymeric capsules for self-healing anticorrosion coatings T1 - Polymerische Kapseln für selbstheilende Korrosionsschutzbeschichtungen N2 - The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests. N2 - In Anlehnung an den Selbstheilungsmechanismus der menschlichen Haut entwickeln wir ein innovatives Verfahren zur Funktionalisierung von Korrosionsschutzbeschichtungen, um auch diese in die Lage zu versetzen Beschädigungen selbstständig „auszuheilen“. Dazu werden winzige Mikro- und Nanobehälter mit aktiven Substanzen (z. B. Korrosionshemmstoffen, Versiegelungsmitteln, Bioziden etc.) befüllt und anschließend in eine Korrosionsschutzbeschichtung eingebettet. Kommt es nun im Zeitablauf zu korrosionsauslösenden Beschädigungen der Schutzbeschichtung (z. B. durch Kratzer oder Risse) werden an der Defektstelle die eingebetteten Behälter zerstört und aktiv wirkende Gegensubstanzen freigesetzt. Dadurch wird die verletzte Stelle sofort wieder verschlossen und die Korrosionsgefahr eliminiert. Der entscheidende Vorteil derart funktionalisierter Schutzbeschichtungen ist ihre aktive Rückkopplung mit dem Korrosionsauslöser: Die aktive Schutzsubstanz wird nur an der Defektstelle und nur in der zur Korrosionsvermeidung erforderlichen Menge freigegeben. Somit werden eine länger anhaltende Wirkdauer sowie eine deutlich höhere Nachhaltigkeit der Beschichtungen ermöglicht. Dieses „intelligente Verhalten“ der neuen aktiven Korrosionsschutzbeschichtungen ist nur dank ihrer innovativen Mikrostruktur möglich. Die winzigen Mikro- und Nanobehälter beinhalten nicht nur aktive Substanzen in ihrem Inneren sondern besitzen auch eine intelligent konstruierte Hüllenstruktur, deren Durchlässigkeit sich je nach Art des Korrosionsauslösers ändert. Wird die eingekapselte aktive Substanz freigesetzt, fängt diese sofort an gegen die korrosionsverursachenden Einflüsse zu wirken. Ist die Gefahr beseitigt verringert sich die Durchlässigkeit der Behälterhülle wieder. Diese bedingte Reversibilität zwischen geschlossenem und geöffnetem Zustand des Behälters sorgt für einen sehr sparsamen Verbrauch der aktiven Substanz und für die stark verbesserte Schutzwirkung darauf basierender Antikorrosionsbeschichtungen. Diese Arbeit befasst sich mit dem Aufbau polymerer Kern-Schale-Mikrokapseln, die entsprechende Korrosionsinhibitoren und Biocide enthalten. Der Morphologie wird für zahlreiche Lösungsmittel und Polymere mit Hilfe der Hansen-Löslichkeitsparameter in guter Übereinstimmung mit elektronenmikroskopischen Experimenten beschrieben. Die Wirkungsweise in technischen Beschichtungen wird quantifiziert anhand von elektrochemischer Impedanzspektroskopie, Rastervibrationssondenmessungen und industrienahen Testverfahren. KW - Korrosion KW - Selbstheilende Beschichtungen KW - Einkapselung KW - Morphologie von Kapseln KW - corrosion KW - self-healing coatings KW - encapsulation KW - capsule morphology Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60432 ER - TY - THES A1 - Lauterbach, Stefan T1 - Lateglacial to Holocene climatic and environmental changes in Europe : multi-proxy studies on lake sediments along a transect from northern Italy to northeastern Poland T1 - Spätglaziale und holozäne Klima- und Umweltveränderungen in Europa : Multiproxy-Untersuchungen an Seesedimenten entlang eines Transekts zwischen Norditalien und Nordostpolen N2 - Sediment records of three European lakes were investigated in order to reconstruct the regional climate development during the Lateglacial and Holocene, to investigate the response of local ecosystems to climatic fluctuations and human impact and to relate regional peculiarities of past climate development to climatic changes on a larger spatial scale. The Lake Hańcza (NE Poland) sediment record was studied with a focus on reconstructing the early Holocene climate development and identifying possible differences to Western Europe. Following the initial Holocene climatic improvement, a further climatic improvement occurred between 10 000 and 9000 cal. a BP. Apparently, relatively cold and dry climate conditions persisted in NE Poland during the first ca. 1500 years of the Holocene, most likely due to a specific regional atmospheric circulation pattern. Prevailing anticyclonic circulation linked to a high-pressure cell above the remaining Scandinavian Ice Sheet (SIS) might have blocked the eastward propagation of warm and moist Westerlies and thus attenuated the early Holocene climatic amelioration in this region until the final decay of the SIS, a pattern different from climate development in Western Europe. The Lateglacial sediment record of Lake Mondsee (Upper Austria) was investigated in order to study the regional climate development and the environmental response to rapid climatic fluctuations. While the temperature rise and environmental response at the onset of the Holocene took place quasi-synchronously, major leads and lags in proxy responses characterize the onset of the Lateglacial Interstadial. In particular, the spread of coniferous woodlands and the reduction of detrital flux lagged the initial Lateglacial warming by ca. 500–750 years. Major cooling at the onset of the Younger Dryas took place synchronously with a change in vegetation, while the increase of detrital matter flux was delayed by about 150–300 years. Complex proxy responses are also detected for short-term Lateglacial climatic fluctuations. In summary, periods of abrupt climatic changes are characterized by complex and temporally variable proxy responses, mainly controlled by ecosystem inertia and the environmental preconditions. A second study on the Lake Mondsee sediment record focused on two small-scale climate deteriorations around 8200 and 9100 cal. a BP, which have been triggered by freshwater discharges to the North Atlantic, causing a shutdown of the Atlantic meridional overturning circulation (MOC). Combining microscopic varve counting and AMS 14C dating yielded a precise duration estimate (ca. 150 years) and absolute dating of the 8.2 ka cold event, both being in good agreement with results from other palaeoclimate records. Moreover, a sudden temperature overshoot after the 8.2 ka cold event was identified, also seen in other proxy records around the North Atlantic. This was most likely caused by enhanced resumption of the MOC, which also initiated substantial shifts of oceanic and atmospheric front systems. Although there is also evidence from other proxy records for pronounced recovery of the MOC and atmospheric circulation changes after the 9.1 ka cold event, no temperature overshoot is seen in the Lake Mondsee record, indicating the complex behaviour of the global climate system. The Holocene sediment record of Lake Iseo (northern Italy) was studied to shed light on regional earthquake activity and the influence of climate variability and anthropogenic impact on catchment erosion and detrital flux into the lake. Frequent small-scale detrital layers within the sediments reflect allochthonous sediment supply by extreme surface runoff events. During the early to mid-Holocene, increased detrital flux coincides with periods of cold and wet climate conditions, thus apparently being mainly controlled by climate variability. In contrast, intervals of high detrital flux during the late Holocene partly also correlate with phases of increased human impact, reflecting the complex influences on catchment erosion processes. Five large-scale event layers within the sediments, which are composed of mass-wasting deposits and turbidites, are supposed to have been triggered by strong local earthquakes. While the uppermost of these event layers is assigned to a documented adjacent earthquake in AD 1222, the four other layers are supposed to be related to previously undocumented prehistorical earthquakes. N2 - Sedimente aus drei europäischen Seen wurden untersucht um die regionale Klimaentwicklung während des Spätglazials und Holozäns und die Reaktion der Ökosysteme auf Klimaschwankungen und menschlichen Einfluss zu rekonstruieren sowie die regionalen Besonderheiten der spätquartären Klimaveränderungen in einen überregionalen Kontext zu setzen. Die Sedimente des Jezioro Hańcza (Nordostpolen) wurden im Hinblick auf die frühholozäne Klimaentwicklung und die Identifikation möglicher Unterschiede gegenüber Westeuropa untersucht. Im Anschluss an die Erwärmung zu Beginn des Holozäns konnte eine weitere Verbesserung der Klimabedingungen zwischen 10 000 und 9000 Jahren vor heute nachgewiesen werden. Offensichtlich herrschten in Nordostpolen während der ersten 1500 Jahre des Holozäns noch relative kalte und trockene Klimabedingungen, höchstwahrscheinlich als Resultat besonderer regionaler atmosphärischer Zirkulationsverhältnisse. Eine antizyklonale Zirkulationszelle als Resultat eines Hochdruckgebiets über dem Rest des Skandinavischen Eisschilds verhinderte wahrscheinlich das Vordringen warmer und feuchter Luftmassen aus Westen und verursachte damit eine Abschwächung der frühholozänen Klimaverbesserung in dieser Region bis zum endgültigen Zerfall des Eisschilds, was grundsätzlich von der frühholozänen Klimaentwicklung in Westeuropa abweicht. Die spätglazialen Sedimente des Mondsees (Oberösterreich) wurden im Hinblick auf die regionale Klimaentwicklung und die Reaktion des Ökosystems auf abrupte Klimaschwankungen untersucht. Während die Erwärmung zu Beginn des Holozäns von einer zeitgleichen Reaktion des Ökosystems begleitet wurde, war die Reaktion des Ökosystems auf die Erwärmung zu Beginn des Spätglazials deutlich verzögert. Insbesondere die Ausbreitung von Nadelwäldern und die Reduktion des klastischen Eintrags folgten der spätglazialen Erwärmung erst mit einer Verzögerung von ca. 500–750 Jahren. Die Abkühlung zu Beginn der Jüngeren Dryas war durch eine deutliche Synchronizität zwischen Temperatur- und Vegetationsänderung gekennzeichnet, wohingegen der Anstieg des klastischen Eintrags erst 150–300 Jahre verzögert folgte. Eine komplexe Reaktion des Ökosystems zeigt sich auch während kurzfristiger spätglazialer Klimaschwankungen. Zusammenfassend lässt sich sagen, dass abrupte Klimaveränderungen durch komplexe und zeitlich variable Reaktionsmuster des Ökosystems gekennzeichnet sind, die hauptsächlich von dessen Klimasensitivität und den ökologischen Ausgangsbedingungen abhängen. Eine zweite Studie an den Sedimenten des Mondsees konzentrierte sich auf zwei Klimaschwankungen vor ca. 8200 und 9100 Jahren, für die Schmelzwassereintrag in den Nordatlantik und ein damit verbundenes Zusammenbrechen der thermohalinen Zirkulation als Ursache angesehen wird. Durch Warvenzählungen und 14C-Datierungen konnten sowohl die Dauer (ca. 150 Jahre) als auch das absolute Alter der Kältephase vor ca. 8200 Jahren zuverlässig bestimmt werden, welche in guter Übereinstimmung mit Resultaten aus anderen Paläoklimaarchiven stehen. Darüber hinaus wurde eine kurze Warmphase direkt im Anschluss an das Abkühlungsereignis identifiziert, die auch in anderen Klimaarchiven im nordatlantischen Raum nachweisbar ist. Diese wurde wahrscheinlich durch ein Wiedererstarken der thermohalinen Zirkulation verursacht, welches darüber hinaus eine Verschiebung ozeanischer und atmosphärischer Frontsysteme zur Folge hatte. Obwohl andere Klimaarchive auch nach dem Abkühlungsereignis vor ca. 9100 Jahren auf ein Wiedererstarken der thermohalinen Zirkulation hindeuten, finden sich in den Sedimenten des Mondsees keine Anzeichen für eine solche Wärmeperiode, was die Komplexität des globalen Klimasystems verdeutlicht. Die holozänen Sedimente des Lago d’Iseo (Norditalien) wurden im Hinblick auf die regionale Erdbebenaktivität und den Einfluss von Klima und Mensch auf Erosionsprozesse im Einzugsgebiet und den klastischen Eintrag in den See untersucht. Zahlreiche kleinere detritische Lagen in den Sedimenten spiegeln Eintrag durch extreme Oberflächenabflussereignisse wieder. Während des Früh- und Mittelholozäns zeigt sich eine deutliche Übereinstimmung zwischen erhöhtem klastischen Eintrag und kühleren und feuchteren Klimaverhältnissen, was auf einen dominanten Einfluss der natürlichen Klimavariabilität hindeutet. Im Gegensatz dazu zeigen Phasen erhöhten klastischen Eintrags während des Spätholozäns teilweise auch eine Korrelation mit erhöhter Siedlungsaktivität, was die Komplexität der Einflüsse auf Erosionsprozesse im Einzugsgebiet verdeutlicht. Darüber hinaus konnten auch fünf größere Ereignislagen nachgewiesen werden, welche durch Rutschmassen und Turbidite gekennzeichnet sind und für die lokale Erdbeben als Ursache vermutet werden. Die jüngste Ereignislage kann mit einem historisch dokumentierten proximalen Erdbeben im Jahr AD 1222 korreliert werden. Für die anderen vier Ereignislagen werden bisher undokumentierte prähistorische Erdbeben als Ursache angenommen. KW - Spätglazial KW - Holozän KW - Seesedimente KW - Paläoklima KW - Europa KW - Lateglacial KW - Holocene KW - lake sediments KW - palaeoclimate KW - Europe Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-58157 ER - TY - THES A1 - Lenz, Josefine T1 - Thermokarst dynamics in central-eastern Beringia T1 - Thermokarstdynamik im zentral-östlichen Beringia BT - insights from permafrost and lacustrine sediment cores BT - Einblicke durch Permafrost- und Seesedimentkerne N2 - Widespread landscape changes are presently observed in the Arctic and are most likely to accelerate in the future, in particular in permafrost regions which are sensitive to climate warming. To assess current and future developments, it is crucial to understand past environmental dynamics in these landscapes. Causes and interactions of environmental variability can hardly be resolved by instrumental records covering modern time scales. However, long-term environmental variability is recorded in paleoenvironmental archives. Lake sediments are important archives that allow reconstruction of local limnogeological processes as well as past environmental changes driven directly or indirectly by climate dynamics. This study aims at reconstructing Late Quaternary permafrost and thermokarst dynamics in central-eastern Beringia, the terrestrial land mass connecting Eurasia and North America during glacial sea-level low stands. In order to investigate development, processes and influence of thermokarst dynamics, several sediment cores from extant lakes and drained lake basins were analyzed to answer the following research questions: 1. When did permafrost degradation and thermokarst lake development take place and what were enhancing and inhibiting environmental factors? 2. What are the dominant processes during thermokarst lake development and how are they reflected in proxy records? 3. How did, and still do, thermokarst dynamics contribute to the inventory and properties of organic matter in sediments and the carbon cycle? Methods applied in this study are based upon a multi-proxy approach combining sedimentological, geochemical, geochronological, and micropaleontological analyses, as well as analyses of stable isotopes and hydrochemistry of pore-water and ice. Modern field observations of water quality and basin morphometrics complete the environmental investigations. The investigated sediment cores reveal permafrost degradation and thermokarst dynamics on different time scales. The analysis of a sediment core from GG basin on the northern Seward Peninsula (Alaska) shows prevalent terrestrial accumulation of yedoma throughout the Early to Mid Wisconsin with intermediate wet conditions at around 44.5 to 41.5 ka BP. This first wetland development was terminated by the accumulation of a 1-meter-thick airfall tephra most likely originating from the South Killeak Maar eruption at 42 ka BP. A depositional hiatus between 22.5 and 0.23 ka BP may indicate thermokarst lake formation in the surrounding of the site which forms a yedoma upland till today. The thermokarst lake forming GG basin initiated 230 ± 30 cal a BP and drained in Spring 2005 AD. Four years after drainage the lake talik was still unfrozen below 268 cm depth. A permafrost core from Mama Rhonda basin on the northern Seward Peninsula preserved a full lacustrine record including several lake phases. The first lake generation developed at 11.8 cal ka BP during the Lateglacial-Early Holocene transition; its old basin (Grandma Rhonda) is still partially preserved at the southern margin of the study basin. Around 9.0 cal ka BP a shallow and more dynamic thermokarst lake developed with actively eroding shorelines and potentially intermediate shallow water or wetland phases (Mama Rhonda). Mama Rhonda lake drainage at 1.1 cal ka BP was followed by gradual accumulation of terrestrial peat and top-down refreezing of the lake talik. A significant lower organic carbon content was measured in Grandma Rhonda deposits (mean TOC of 2.5 wt%) than in Mama Rhonda deposits (mean TOC of 7.9 wt%) highlighting the impact of thermokarst dynamics on biogeochemical cycling in different lake generations by thawing and mobilization of organic carbon into the lake system. Proximal and distal sediment cores from Peatball Lake on the Arctic Coastal Plain of Alaska revealed young thermokarst dynamics since about 1,400 years along a depositional gradient based on reconstructions from shoreline expansion rates and absolute dating results. After its initiation as a remnant pond of a previous drained lake basin, a rapidly deepening lake with increasing oxygenation of the water column is evident from laminated sediments, and higher Fe/Ti and Fe/S ratios in the sediment. The sediment record archived characterizing shifts in depositional regimes and sediment sources from upland deposits and re-deposited sediments from drained thaw lake basins depending on the gradually changing shoreline configuration. These changes are evident from alternating organic inputs into the lake system which highlights the potential for thermokarst lakes to recycle old carbon from degrading permafrost deposits of its catchment. The lake sediment record from Herschel Island in the Yukon (Canada) covers the full Holocene period. After its initiation as a thermokarst lake at 11.7 cal ka BP and intense thermokarst activity until 10.0 cal ka BP, the steady sedimentation was interrupted by a depositional hiatus at 1.6 cal ka BP which likely resulted from lake drainage or allochthonous slumping due to collapsing shore lines. The specific setting of the lake on a push moraine composed of marine deposits is reflected in the sedimentary record. Freshening of the maturing lake is indicated by decreasing electrical conductivity in pore-water. Alternation of marine to freshwater ostracods and foraminifera confirms decreasing salinity as well but also reflects episodical re-deposition of allochthonous marine sediments. Based on permafrost and lacustrine sediment records, this thesis shows examples of the Late Quaternary evolution of typical Arctic permafrost landscapes in central-eastern Beringia and the complex interaction of local disturbance processes, regional environmental dynamics and global climate patterns. This study confirms that thermokarst lakes are important agents of organic matter recycling in complex and continuously changing landscapes. N2 - Derzeit werden deutliche Landschaftsveränderungen in der Arktis beobachtet, welche sich höchstwahrscheinlich zukünftig v.a. in den Permafrostregionen verstärken, da diese besonders empfindlich auf Klimaveränderungen reagieren. Um derzeitige und zukünftige Entwicklungen einschätzen zu können, ist es wichtig vergangene Umweltprozesse zu verstehen. Ursachen und Wechselwirkungen von Umweltveränderungen können nur bedingt durch instrumentelle Aufzeichnungen erklärt werden, doch Paleo-Umweltarchive können weit in die Vergangenheit reichende Umweltdynamiken aufzeichnen. Seesedimente sind wichtige Archive, die lokale limnogeologische Prozesse, aber auch direkt oder indirekt klimatisch gesteuerte Umweltveränderungen der Vergangenheit aufzeichnen. Ziel der vorliegenden Arbeit ist es, spätquartäre Permafrost- und Thermokarstdynamik im zentral-östlichen Beringia zu rekonstruieren. Beringia umfasst jene terrestrische Landmasse, welche Eurasien und Nord-Amerika zu Zeiten von Meeresspiegeltiefständen verband. Um die Entwicklung, die Prozesse und den Einfluss von Thermokarstdynamik zu untersuchen, wurden mehrere Sedimentkerne von rezenten Seen und ausgelaufenen Seebecken analysiert, um folgende Forschungsfragen zu beantworten: 1. Zu welcher Zeit degradierte Permafrost und wann entwickelten sich Thermokarstseen? Was waren hemmende oder verstärkende Faktoren? 2. Was sind dominierende Prozesse während der Entwicklung von Thermokarstseen und wie spiegeln sich diese in Proxy-Aufzeichnungen wieder? 3. Wie hat Thermokarstdynamik damals und heute zur Bedeutung von organischer Substanz in Sedimenten und im Kohlenstoffkreislauf beigetragen? Die in dieser Arbeit angewandten Methoden basieren auf einem sogenannten „multi-proxy“ Ansatz, der sedimentologische, geochemische, geochronologische und mikropaläontologische Analysen, sowie die Untersuchung von stabilen Isotopen und die Hydrochemie von Porenwasser und -eis, verbindet. Feldmessungen der modernen Wasserqualität und Beckenmorphometrie komplettieren die Umweltuntersuchungen. Auf Grundlage der untersuchten Sedimentkerne lässt sich die Degradation von Permafrost und die Dynamik von Thermokarst auf zeitlich verschiedenen Skalen rekonstruieren. Die Analyse eines Sedimentkerns vom GG-Becken auf der nördlichen Seward-Halbinsel (Alaska) zeigt eine vorwiegend terrestrische Akkumulation von Yedoma während des Früh- und Mittel-Wisconsin mit zwischenzeitlich feuchteren Verhältnissen zwischen 44,5 und 41,5 ka BP. Diese frühe Feuchtgebietsphase wurde durch die Akkumulation einer 1 m dicken Tephra-Lage beendet, welche sehr wahrscheinlich von der Eruption des heutigen South Killeak Maar vor etwa 42.000 Jahren stammt. Eine Schichtlücke im Sedimentkern von etwa 22,5 und 0,23 ka BP gibt einen Hinweis auf Thermokarstentwicklung in der Umgebung der Kernlokation, welche bis heute ein Yedoma-Rudiment bildet. Der Thermokarstsee, der GG-Becken formte, entstand 230 ± 30 cal a BP und drainierte im Frühling 2005 AD. Vier Jahre nach der Drainage war der Talik des Sees in einer Tiefe von 268 cm noch ungefroren. Ein Permafrostkern vom Mama Rhonda-Becken auf der nördlichen Seward-Halbinsel archivierte eine vollständige limnische Fazies mit mehreren Seephasen. Die erste Seegeneration entstand am Übergang vom Spätglazial zum Frühholozän um etwa 11,8 cal ka BP; das alte Seebecken (Grandma Rhonda) ist bis heute südlich der Kernlokation erhalten. Etwa um 9,0 cal ka BP entwickelte sich ein eher flaches und dynamisches Seesystem mit aktiv erodierenden Ufern und potenziell zwischengeschalteten Flachwasser- oder Feuchtgebietsphasen (Mama Rhonda). Die Drainage vom Mama Rhonda-See etwa 1,1 cal ka BP wurde gefolgt von gradueller Torfakkumulation und einem von oben zurückfrierenden See-Talik Es wurde ein deutlich geringerer organischer Kohlenstoff-Gehalt in Grandma Rhonda-Ablagerungen (TOC im Mittel 2,5 Gew.-%) festgestellt, als in Mama Rhonda Ablagerungen (TOC im Mittel 7,9 Gew.-%). Dies zeigt den bedeutenden Einfluss von Thermokarst auf biogeochemische Kreisläufe, da in verschiedenen Seegenerationen organischen Kohlenstoff durch Permafrost-Tauen im Seesystem mobilisiert wird. Seesedimentkerne aus der Uferzone und dem zentralen Bereich von Peatball Lake auf der Arktischen Küstenebene von Alaska, ergaben eine junge Thermokarstdynamik von 1.400 Jahren, welche auf der Basis von absoluten Datierungen und Uferexpansionsraten rekonstruiert wurde. Nach der Seeinitiierung als Rest-See eines zuvor ausgelaufenen Seebeckens, vertiefte sich Peatball Lake verhältnismäßig schnell mit zunehmender Sauerstoffanreicherung der Wassersäule, wie aus laminierten Sedimenten und hohen Fe/Ti- und Fe/S-Verhältnissen im Sediment ersichtlich ist. Die Sedimente von Peatball Lake archivierten einen Wechsel des Ablagerungsregimes bei Ausdehnung der Seefläche und einen Wechsel der Sedimentquelle von ursprünglichen, rein terrestrischen Ablagerungen und bereits umgelagerten Sedimenten aus drainierten Seebecken. Angezeigt wird dieser Wechsel durch eine Veränderung im Eintrag organischen Materials in das Seesystem, was wiederum das Potential von Thermokarstseen bei der Aufarbeitung alten Kohlenstoffs aus degradierendem Permafrost im Einzugsgebiet verdeutlicht. Der Seesedimentkern von der Herschel Insel im Yukon (Kanada) deckt das gesamte Holozän ab. Nach der Seeentstehung um 11,7 cal ka BP und einer Zeit intensiver Thermokarstaktivität bis 11,0 cal ka BP, wird die Phase einer eher kontinuierlichen Sedimentation von einer Schichtlücke um 1,6 cal ka BP unterbrochen. Diese wurde entweder durch die Drainage des Sees oder einer allochthonen Rutschung instabiler Uferlinien verursacht. Die spezielle Situation des Sees auf einer Stauchendmoräne aus marinem Material spiegelt sich auch in dem Seesedimentarchiv wieder. Das Aussüßen des wachsenden Sees wird durch die abnehmende elektrische Leitfähigkeit im Porenwasser angezeigt. Der Wechsel von marinen und Süßwasserostrakoden- und Foraminiferengemeinschaften bestätigt zum einen die abnehmende Salinität des Sees, aber zeigt zum anderen auch episodische Umlagerung von allochthonem, marinem Sediment. Auf der Grundlange von Permafrost- und Seesedimentkernen zeigt diese Arbeit Beispiele spätquartärer Entwicklungsgeschichte typischer Arktischer Permafrostlandschaften im zentral-östlichen Beringia. Es werden komplexe Zusammenhänge zwischen lokalen Störungsprozessen, regionaler Umweltdynamik und globalen Klimaveränderungen aufgezeigt. Thermokarstseen spielen dabei eine wichtige Rolle im sich kontinuierlich verändernden Landschaftsbild der hohen Breiten und im Stoffkreislauf bei der Aufarbeitung organischer Substanz. KW - paleolimnology KW - permafrost degradation KW - periglacial landscape evolution KW - thermokarst processes KW - carbon cycling KW - central-eastern Beringia KW - Paläolimnologie KW - Permafrostdegradation KW - periglaziale Landschaftsentwicklung KW - Thermokarstprozesse KW - Kohlenstoffkreislauf KW - zentral-östliches Beringia Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101364 ER - TY - THES A1 - Lepre, Enrico T1 - Nitrogen-doped carbonaceous materials for energy and catalysis N2 - Facing the environmental crisis, new technologies are needed to sustain our society. In this context, this thesis aims to describe the properties and applications of carbon-based sustainable materials. In particular, it reports the synthesis and characterization of a wide set of porous carbonaceous materials with high nitrogen content obtained from nucleobases. These materials are used as cathodes for Li-ion capacitors, and a major focus is put on the cathode preparation, highlighting the oxidation resistance of nucleobase-derived materials. Furthermore, their catalytic properties for acid/base and redox reactions are described, pointing to the role of nitrogen speciation on their surfaces. Finally, these materials are used as supports for highly dispersed nickel loading, activating the materials for carbon dioxide electroreduction. N2 - Angesichts der Umweltkrise werden neue Technologien benötigt, um unsere Gesellschaft zu erhalten. In diesem Zusammenhang zielt diese Arbeit darauf ab, die Eigenschaften und Anwendungen von nachhaltigen Materialien auf Kohlenstoffbasis zu untersuchen. Insbesondere wird über die Synthese und Charakterisierung eines breiten Spektrums poröser, kohlenstoffhaltiger Materialien berichtet, welche einen hohen Stickstoffgehalt, besitzen und aus Nukleobasen gewonnen werden. Diese Materialien werden als Kathoden für Li-Ionen-Kondensatoren verwendet, wobei der Schwerpunkt auf der Kathodenherstellung liegt und die Oxidationsbeständigkeit, der aus Nukleobasen gewonnenen Materialien, hervorgehoben wird. Darüber hinaus werden ihre katalytischen Eigenschaften für Säure/Base- und Redoxreaktionen beschrieben, wobei die Rolle der Speziierung des Stickstoffs auf ihren Oberflächen hervorgehoben wird. Schließlich werden diese Materialien als Träger für eine hochdisperse Beladung mit Nickel verwendet, wodurch die Materialien für die Kohlendioxid Elektroreduktion aktiviert werden. KW - heteroatom-doped carbons KW - heteroatom-dotierte Kohlenstoffe KW - porous materials KW - poröse Materialien KW - salt melt templating KW - Salzschmelze-Templating KW - heterogeneous catalysis KW - heterogene Katalyse KW - single-atom catalysis KW - Einzelatomkatalyse KW - Li-ion capacitor KW - Li-Ionen-Kondensator Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577390 ER - TY - THES A1 - Littmann, Daniela-Christin T1 - Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track T1 - Large-Eddy-Simulationen der arktischen Grenzschicht um die MOSAiC-Driftroute N2 - The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models. N2 - Das icosahedral non-hydrostatische large eddy model (ICON-LEM) wurde entlang des Driftweges des Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 und 20 angewendet. Das Modell nutzte horizontale Gitterauflösungen zwischen 100m und 800m auf Gebieten mit Durchmessern von 17.5km und 140 km. An den seitlichen Rändern wurde das Modell mit Analysedaten des Deutschen Wetterdienstes (DWD) angetrieben, welche mit ICON im limited area mode (ICON-LAM) mit einer horizontalen Auflösung von 3km herunterskaliert wurden. Ziel dieser Arbeit war es, die flache atmosphärische Grenzschicht in der zentralen Arktis während des polaren Winters mit einem hochauflösenden mesoskaligen Modell zu untersuchen. Die standardmäßigen Einstellungen in ICON-LEM machen es dem Modell unmöglich, die wechselwirkenden Austauschprozesse in der arktischen Grenzschicht gemäß der MOSAiC Beobachtungen abzubilden. Das implementierte Meereis-Schema in ICON beinhaltet keine Schneeschicht auf dem Meereis, was eine zu große Verzögerung der Meereisoberflächentemperatur auf atmosphärische Veränderungen bewirkt. Um die Meereisfläche schneller auf Änderungen in der Atmosphäre reagieren lassen zu können, wurde die bestehende Meereisparameterisierung in ICON um einen angepasstenWärmekapazitätsterm erweitert. Die angepasste Meereis-Parameterisierung stimmte besser mit den MOSAiC Beobachtungen überein. Allerdings ist die Meereisoberflächentemperatur im Modell aufgrund der fehlerbehafteten einfallenden, langwelligen Strahlung und dem Fehlen komplexer Oberflächenstrukturen im Meereis generell niedriger als beobachtet. Die groß-wirbellige Turbulenz-Schliessung wird der Darstellung der unteren Grenschicht während starker stabiler Schichtung besser gerecht als die Nicht-Wirbel-auflösende Turbulenz-Schließung. Desweiteren reduzierte die Integration der Risse in der Meereisoberfläche die Abweichung der sensiblen Wärme für verschiedene Wetterzustände. Die Ergebnisse dieser Arbeit helfen die Grenzschicht-Prozesse in der zentralen Arktis während der polaren Nacht besser zu verstehen. Hochauflösende mesoskalige Simulationen ermöglichen die Repräsentation zeitlicher und räumlicher klein-skaliger Wechselwirkungen und bestehende Parametrisierungen auch für regionale und globale Modelle weiterzuentwickeln. KW - Arctic KW - atmosphere KW - atmospheric science KW - high resolution KW - boundary layer KW - stable stratification KW - heat flux KW - heat capacity KW - Arktis KW - Atmosphäre KW - Atmosphärenforschung KW - hohe Auflösung KW - Grenzschicht KW - stabile Schichtung KW - Wärmefluss KW - Wärmekapazität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624374 ER - TY - THES A1 - Löffler, Frank T1 - Numerical simulations of neutron star - black hole mergers T1 - Computersimulationen von Zusammenstößen eines schwarzen Lochs und eines Neutronensterns N2 - Collisions of black holes and neutron stars, named mixed binaries in the following, are interesting because of at least two reasons. Firstly, it is expected that they emit a large amount of energy as gravitational waves, which could be measured by new detectors. The form of those waves is expected to carry information about the internal structure of such systems. Secondly, collisions of such objects are the prime suspects of short gamma ray bursts. The exact mechanism for the energy emission is unknown so far. In the past, Newtonian theory of gravitation and modifications to it were often used for numerical simulations of collisions of mixed binary systems. However, near to such objects, the gravitational forces are so strong, that the use of General Relativity is necessary for accurate predictions. There are a lot of problems in general relativistic simulations. However, systems of two neutron stars and systems of two black holes have been studies extensively in the past and a lot of those problems have been solved. One of the remaining problems so far has been the use of hydrodynamic on excision boundaries. Inside excision regions, no evolution is carried out. Such regions are often used inside black holes to circumvent instabilities of the numerical methods near the singularity. Methods to handle hydrodynamics at such boundaries have been described and tests are shown in this work. One important test and the first application of those methods has been the simulation of a collapsing neutron star to a black hole. The success of these simulations and in particular the performance of the excision methods was an important step towards simulations of mixed binaries. Initial data are necessary for every numerical simulation. However, the creation of such initial data for general relativistic situations is in general very complicated. In this work it is shown how to obtain initial data for mixed binary systems using an already existing method for initial data of two black holes. These initial data have been used for evolutions of such systems and problems encountered are discussed in this work. One of the problems are instabilities due to different methods, which could be solved by dissipation of appropriate strength. Another problem is the expected drift of the black hole towards the neutron star. It is shown, that this can be solved by using special gauge conditions, which prevent the black hole from moving on the computational grid. The methods and simulations shown in this work are only the starting step for a much more detailed study of mixed binary system. Better methods, models and simulations with higher resolution and even better gauge conditions will be focus of future work. It is expected that such detailed studies can give information about the emitted gravitational waves, which is important in view of the newly built gravitational wave detectors. In addition, these simulations could give insight into the processes responsible for short gamma ray bursts. N2 - Zusammenstöße eines schwarzen Lochs und eines Neutronensterns, im Folgenden "gemischte Zusammenstöße" genannt, sind aus wenigstens zwei Gründen interessant. Erstens wird erwartet, dass dabei große Mengen Energie als Gravitationswellen freigesetzt werden und diese mit neuen Detektoren gemessen werden können. Die Form dieser Wellen verrät viel über die Beschaffenheit eines solchen Systems und stellt neben elektromagnetischen Wellen eine wichtige Informationsquelle dar. Zweitens sind Zusammenstöße von kompakten Objekten wie Neutronensternen und schwarze Löchern sehr wahrscheinlich die Ursache sogenannter kurzer Gammastrahlungsblitze. Deren genauer Mechanismus für die Umwandlung der gewaltigen Energiemengen, die bei diesen Blitzen ausgesandt werden, ist jedoch bisher unbekannt. Computersimulationen von Zusammenstößen eines gemischten Systems wurden bisher oft unter Benutzung der Newtonschen Gravitationstheorie, bzw. Korrekturen dazu, durchgeführt. In der Nähe so kompakte Objekte wie schwarzer Löcher oder Neutronensterne ist jedoch die Gravitationswirkung so stark, dass Näherungen wie die erwähnten Korrekturen der Newtonschen Gravitationstheorie zu ungenau sind. Eine Benutzung der allgemeinen Relativitätstheorie ist daher für dieses Problem unumgänglich. Die Probleme allgemein-relativistischer Simulationen sind vielfältig. Jedoch wurden Binärsysteme zweier schwarzer Löcher und zweier Neutronensterne schon eingehend untersucht, und so viele Probleme, die auch Simulationen gemischter Systeme betreffen, gelöst. Eins der bisher ausstehenden Probleme war die Behandlung der Hydrodynamik an Ausschneiderändern; Rändern zu Gebieten, die in der Zeitentwicklung der Simulation ignoriert werden. Solche Ränder werden zum Beispiel innerhalb eines schwarzen Lochs benutzt, um Instabilitäten des Programms in der Nähe der Singularität zu vermeiden. Methoden, solche Ränder zu behandeln wurden in der Arbeit entwickelt, getestet und gezeigt, dass sie verlässlich arbeiten. Ein wichtiger Test für diese Methoden, der gleichzeitig der Gewinnung neuer Erkenntnisse diente, war deren Anwendung auf Simulationen von zu schwarzen Löchern kollabierenden, rotierenden Sternen. Der Erfolg, diese Simulationen ohne Probleme mit den erwähnten Methoden durchzuführen, war ein wichtiger Schritt zu Simulationen gemischter Binärsysteme. Für Computersimulationen sind Anfangsdaten notwendig, die das gewünschte Problem beschreiben. Die Erstellung solcher Anfangsdaten ist jedoch unter Benutzung der allgemeinen Relativitätstheorie ausser in Spezialfällen sehr komplex. Wir zeigen, wie man einen schon vorhandenen Algorithmus für Anfangsdaten für zwei schwarze Löcher ändern kann, um Anfangsdaten für ein gemischtes Binärsystem zu erhalten. Diese Anfangsdaten wurden für Simulationen eines gemischten Binärsystems benutzt. Während dieser Simulationen traten mehrere Probleme auf. Zwei dieser Probleme waren numerische Instabilitäten unterschiedlicher Herkunft. Beide konnten jedoch mit angepasst starker Dissipation (der künstliche Entnahme von hochfrequenter Energie aus dem System) unterdrückt werden. Ein weiteres Problem war die erwartete Bewegung des schwarzen Lochs in Richtung des Neutronensterns. Da ein Teil des Simulationsgebietes innerhalb des schwarzen Lochs ausgeschnitten wird und das verwendete Programm bewegte Ausschneidegebiete nicht behandeln kann, darf sich das schwarze Loch jedoch auf dem Gitter kaum bewegen. Wir haben dieses Problem durch eine an das Problem angepasste Eichbedingung gelöst, die auf Bewegungen des scheinbaren Horizons reagiert und die Position des schwarzen Lochs auf diese Weise nahezu konstant hält. Die Methoden und Simulationen dieser Arbeit sind nur der Anfangspunkt einer ausführlichen Studie von Binärsystemen eines schwarzen Lochs und eines Neutronensterns. Bessere Methoden, Modelle und Simulationen mit höherer Auflösung und besser an das System angepassten Koordinaten werden Mittelpunkt zukünftiger Arbeit sein. Es wird erwartet, dass solche detailierten Studien Erkenntnisse über die abgestrahlten Gravitationswellen liefern, die gerade in Hinblick auf die neuen Gravitationswellendetektoren wichtig sind. Weiterhin könnten diese Simulationen dabei helfen, die Prozesse, die kurze Gammastrahlungsblitze hervorrufen, und über die im Moment kaum etwas bekannt ist, aufzuklären. KW - Relativistische Astrophysik KW - Neutronensterne KW - schwarze Löcher KW - neutron stars KW - black holes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7743 ER - TY - THES A1 - Martin, Benjamin T1 - Linking individual-based models and dynamic energy budget theory : lessons for ecology and ecotoxicology T1 - Individuenbasierte Modelle mit dynamischen Energiehaushalten bereichern die Ökologie und Ökotoxikologie N2 - In the context of ecological risk assessment of chemicals, individual-based population models hold great potential to increase the ecological realism of current regulatory risk assessment procedures. However, developing and parameterizing such models is time-consuming and often ad hoc. Using standardized, tested submodels of individual organisms would make individual-based modelling more efficient and coherent. In this thesis, I explored whether Dynamic Energy Budget (DEB) theory is suitable for being used as a standard submodel in individual-based models, both for ecological risk assessment and theoretical population ecology. First, I developed a generic implementation of DEB theory in an individual-based modeling (IBM) context: DEB-IBM. Using the DEB-IBM framework I tested the ability of the DEB theory to predict population-level dynamics from the properties of individuals. We used Daphnia magna as a model species, where data at the individual level was available to parameterize the model, and population-level predictions were compared against independent data from controlled population experiments. We found that DEB theory successfully predicted population growth rates and peak densities of experimental Daphnia populations in multiple experimental settings, but failed to capture the decline phase, when the available food per Daphnia was low. Further assumptions on food-dependent mortality of juveniles were needed to capture the population dynamics after the initial population peak. The resulting model then predicted, without further calibration, characteristic switches between small- and large-amplitude cycles, which have been observed for Daphnia. We conclude that cross-level tests help detecting gaps in current individual-level theories and ultimately will lead to theory development and the establishment of a generic basis for individual-based models and ecology. In addition to theoretical explorations, we tested the potential of DEB theory combined with IBMs to extrapolate effects of chemical stress from the individual to population level. For this we used information at the individual level on the effect of 3,4-dichloroanailine on Daphnia. The individual data suggested direct effects on reproduction but no significant effects on growth. Assuming such direct effects on reproduction, the model was able to accurately predict the population response to increasing concentrations of 3,4-dichloroaniline. We conclude that DEB theory combined with IBMs holds great potential for standardized ecological risk assessment based on ecological models. N2 - Für die ökologische Risikobewertung von Chemikalien sind individuenbasierte Populationsmodelle ein vielversprechendes Werkzeug um heutige Bewertungen ökologisch realistischer zu gestalten. Allerdings ist die Entwicklung und Parametrisierung derartiger Modelle zeitaufwendig und oft wenig systematisch. Standardisierte, geprüfte Untermodelle, die Einzelorganismen beschreiben, würden die individuenbasierte Modellierung effizienter und kohärenter machen. In meiner Dissertation habe ich daher untersucht, inwieweit sich die Dynamic Energy Budget-Theorie (DEB) als Standardmodell innerhalb individuenbasierter Populationsmodelle eignet, und zwar sowohl für die ökologische Risikobewertung als auch für die theoretische Populationsökologie. Zunächst habe ich eine generische Implementierung der DEB-Theorie im Rahmen individuenbasierter Modellen (IBM) erstellt: DEB-IBM. Dieses Werkzeug nutzend habe ich dann untersucht, ob es mit Hilfe der DEB-Theorie gelingt, ausgehend von den Eigenschaften und Aktivitäten einzelner Individuen, Populationsdynamik vorherzusagen. Wir nutzten dabei Daphnia magna als Modellart, für die Daten auf der Individuenebene verfügbar waren, um das Modell zu parametrisieren, sowie Populationsdaten, mit denen Modellvorhersagen verglichen werden konnten. DEB-Theorie war in der Lage, beobachtete Populationswachstumsraten sowie die maximalen Abundanzen korrekt vorherzusagen, und zwar für verschiedene Umweltbedingungen. Für Phasen des Rückgangs der Population allerdings, wenn die für die Daphnien verfügbare Nahrungsmenge gering war, kam es zu Abweichungen. Es waren deshalb zusätzliche Annahmen über nahrungsabhängige Sterblichkeit von juvenilen Daphnien erforderlich, um die gesamte Populationsdynamik korrekt vorherzusagen. Das resultierende Modell konnte dann, ohne weitere Kalibrierungen, den für Daphnien charakteristischen Wechsel zwischen Populationszyklen mit großen und kleinen Amplituden richtig vorhersagen. Wir folgern daraus, daß Ebenen übergreifende Tests dabei helfen, Lücken in aktuellen Theorien über Einzelorganismen aufzudecken Dies trägt zur Theorieentwicklung bei und liefert Grundlagen für individuenbasierte Modellierung und Ökologie. Über diese Grundlagenfragen hinaus haben wir überprüft, ob DEB-Theorie in Kombination mit IBMs es ermöglicht, den Effekt von chemischem Streß auf Individuen auf die Populationsebene zu extrapolieren. Wir nutzten Daten über die Auswirkungen von 3,4 Dichloroanalin auf einzelne Daphnien, die zeigten daß im Wesentlichen die Reproduktion, nicht aber das Wachstum beeinträchtigt ist. Mit entsprechenden Annahmen konnte unser Modell den Effekt auf Populationsebene, für den unabhängige Daten vorlagen, korrekt vorhersagen. DEB-Theorie in Kombination mit individuenbasierter Modellierung birgt somit großes Potential für einen standardisierten modellbasierten Ansatz in der ökologischen Risikobewertung von Chemikalien. KW - Ökologie KW - Ökotoxikologie KW - Populationsdynamik KW - Ecology KW - Ecotoxicology KW - population dynamics Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67001 ER - TY - THES A1 - Mazzanti, Stefano T1 - Novel photocatalytic processes mediated by carbon nitride photocatalysis T1 - Neuartige photokatalytische Prozesse vermittelt durch Kohlenstoffnitrid-Photokatalyse N2 - The key to reduce the energy required for specific transformations in a selective manner is the employment of a catalyst, a very small molecular platform that decides which type of energy to use. The field of photocatalysis exploits light energy to shape one type of molecules into others, more valuable and useful. However, many challenges arise in this field, for example, catalysts employed usually are based on metal derivatives, which abundance is limited, they cannot be recycled and are expensive. Therefore, carbon nitrides materials are used in this work to expand horizons in the field of photocatalysis. Carbon nitrides are organic materials, which can act as recyclable, cheap, non-toxic, heterogeneous photocatalysts. In this thesis, they have been exploited for the development of new catalytic methods, and shaped to develop new types of processes. Indeed, they enabled the creation of a new photocatalytic synthetic strategy, the dichloromethylation of enones by dichloromethyl radical generated in situ from chloroform, a novel route for the making of building blocks to be used for the productions of active pharmaceutical compounds. Then, the ductility of these materials allowed to shape carbon nitride into coating for lab vials, EPR capillaries, and a cell of a flow reactor showing the great potential of such flexible technology in photocatalysis. Afterwards, their ability to store charges has been exploited in the reduction of organic substrates under dark conditions, gaining new insights regarding multisite proton coupled electron transfer processes. Furthermore, the combination of carbon nitrides with flavins allowed the development of composite materials with improved photocatalytic activity in the CO2 photoreduction. Concluding, carbon nitrides are a versatile class of photoactive materials, which may help to unveil further scientific discoveries and to develop a more sustainable future. N2 - Der Schlüssel zur selektiven Reduzierung des Energieverbrauchs für bestimmte Reaktionen ist der Einsatz eines Katalysators, der entscheidet, welche Art von Energie verwendet werden soll. Bei der Photokatalyse wird Lichtenergie verwendet, um eine Art von Molekülen in andere umzuwandeln, die wertvoller und nützlicher sind. Im Gebiet der Photokatalyse gibt es jedoch viele Herausforderungen. Beispielsweise besitzen die verwendeten Katalysatoren üblicherweise eine Basis aus seltenen Erden, deren Verfügbarkeit begrenzt ist, die teuer sind und die nicht recycelt werden können. Daher werden in dieser Arbeit Kohlenstoffnitridmaterialien verwendet, um den Horizont der Photokatalyse zu erweitern. Kohlenstoffnitride sind organische Materialien, die als recycelbare, billige, ungiftige, heterogene Photokatalysatoren fungieren können. In dieser Arbeit wurden sie für die Entwicklung neuer katalytischer Methoden und in neuen Prozesstypen eingesetzt. Es konnte gezeigt werden, dass Kohlenstoffnitride für die Dichlormethylierung von Enonen, durch in-situ aus Chloroform erzeugte Dichlormethylradikale, benutzt werden können. Dies stellt eine neue photokatalytische Synthesestrategie dar und kann zur Herstellung von Bausteinen für pharmazeutische Wirkstoffe verwendet werden. Die Eigenschaften von Kohlenstoffnitriden ermöglichten es, Laborfläschchen, EPR-Kapillaren und die Zelle eines Durchflussreaktors damit zu beschichten, was ein großes Potenzial in der Photokatalyse darstellt. Im Weiteren wurde die Fähigkeit der Kohlenstoffnitride, Ladungen zu speichern, bei der Reduktion organischer Substrate unter lichtfreien Bedingungen genutzt, um neue Erkenntnisse über protonengekoppelte Elektronentransferprozesse an mehreren katalytischen Zentren zu gewinnen. Zusätzlich konnte gezeigt werden, dass aus Kohlenstoffnitriden und Flavinen Verbundwerkstoffen mit verbesserter photokatalytischer Aktivität bei der CO2-Photoreduktion hergestellt werden können. Zusammenfassend lässt sich sagen, dass Kohlenstoffnitride eine vielversprechende Klasse photoaktiver Materialien sind, die dazu beitragen können eine nachhaltigere Zukunft zu gestalten. KW - heterogeneous photocatalysis KW - carbon nitrides KW - organic synthesis KW - heterogene Photokatalyse KW - Kohlenstoffnitriden KW - organische Synthese Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-542099 ER - TY - THES A1 - Meeßen, Christian T1 - The thermal and rheological state of the Northern Argentinian foreland basins T1 - Der thermische und rheologische Zustand der Nordargentinischen Vorlandbecken N2 - The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal décollement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes. Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina. The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the Río de la Plata craton, is expressed as a zone of low average crustal densities. In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends. Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses. Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the décollements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower décollement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift. This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina. N2 - Das Vorland der südamerikanischen Anden ist durch lateral variierende Deformationsregimes des östlichen Vorlands geprägt. Dabei treten zwei grundlegend verschiedene Endglieder mit charakteristischer Architektur auf: flach abgescherte Falten- und Überschiebungsgürtel einerseits und Vorland-Sockelüberschiebungen ("zerbrochenes Vorland") andererseits. Das morphologische Erscheinungsbild der Falten- und Überschiebungsgürtel entspricht lateral ausgedehnten, dicht aneinander gereihten Abfolgen von Hügeln und Tälern. Die Hügel werden durch eine darunter liegende Überschiebung definiert, die in einem subhorizontalen Abscherhorizont in 10 bis 20 km Tiefe endet. Sockelüberschiebungen hingegen sind in Gebieten mit geringer Sedimentmächtigkeit zu finden und sind durch weit auseinander liegende Erhebungen charakterisiert, welche von steil einfallenden, reaktivierten krustenskaligen Verwerfungen begrenzt werden. Als Ursachen der beobachteten Deformationsvariationen wurden präexistente Schwächezonen, Sedimentmächtigkeiten, Lithosphärenverdickung, Vulkanismus oder kompositionelle Eigenschaften aufgeführt. Diese Vorschläge waren überwiegend konzeptuell und meist auf Grundlage von Feldbeobachtungen oder synthetischen numerischen, thermo-mechanischen Modelle abgeleitet. Die vorliegende Dissertation beleuchtet zum ersten mal die Ursachen der beobachteten Deformationsstile aus der Perspektive von dreidimensionaler, Daten-integrativer Modellierung. Durch die Integration voneinander unabhängiger Daten erlaubt diese Art der Beschreibung des physikalischen Zustands der Lithosphäre die Erlangung zusätzliche Hinweise auf die zugrundeliegenden Ursachen der verschiedenen Derformationsregimes. Für eine solche Studie bietet sich Nord-Argentinien an, da dort beide Vorland-Endglieder vorzufinden sind. Die dafür im wesentlichen durchgeführten Arbeitsschritte beinhalten die Erstellung eines strukturellen Dichtemodells des Untersuchungsgebiets, die Berechnung des 3D stationären thermischen Feldes, sowie die Analyse der rheologischen Eigenschaften der Lithosphäre. Das datenbasierte strukturelle Dichtemodell ist mit verschiedenen geologischen und geophysikalischen Beobachtungen sowie dem Bouguer-Schwerefeld konsistent. Dieses Modell bildet die primären Dichtekontraste der oberen 200 km der Lithosphäre ab und differenziert Körper für die Sedimente, die kristalline Kruste, den lithosphärischen Mantel, und die subduzierende Nazca-Platte. Um die krusteninterne Dichteverteilung zu erhalten wurde ein automatisierter Inversionsprozess entworfen der es erlaubt eine leichtere Oberkruste und eine schwerere Unterkruste geometrisch zu definieren. Die Modellierung zeigt, dass die Kruste in Nord-Argentinien durch eine leichtere Oberkruste (2800 kg/m³) und eine dichtere Unterkruste (3100 kg/m³) repräsentiert werden kann. Das Transbrasilianische Linement, welches das Pampia Terran im Westen vom Río de La Plata Kraton im Osten trennt, ist durch eine im Vergleich zur Umgebung geringere durchschnittliche Krustendichte charakterisiert. In einem Exkurs wird anschließend demonstriert, dass die hier entwickelte Inversionsmethodik zur Ermittlung von intrakrustalen Dichtekontrasten auch im obersten lithosphärischen Mantel angewandt werden kann. Dichten zwischen der Kruste-Mantel-Grenze und etwa 50\,km Tiefe sind besonders schwer zu bestimmen, da tomographische Modelle die Geschwindigkeitsvariationen von seismischen Wellen in diesen Bereichen nicht auflösen. In Tan u.a. (2018) demonstrieren wir, dass die Inversionsmethode Dichteverläufe mit einer lateralen Ausdehnung von 125 km oder weniger ermitteln kann, und somit einen wichtigen Beitrag zur Bestimmung von subkrustalen Dichteverteilungen im Mantel liefert. Wegen der genetischen Verbindung zwischen Subduktion, Orogenese und Retroarc Vorlandbecken stellt sich die Frage, ob die Annahme eines stationären thermischen Feldes für solch ein dynamisches Modelliergebiet zulässig ist. Um diese Frage zu beantworten wurde zum einen der Einfluss von Subduktion auf das konduktive thermische Feld auf die kontinentale Lithosphäre untersucht. Zum anderen wurde die Abweichung zwischen transientem und stationären thermischen Feld eines gekoppelten geodynamischen Modells untersucht. Beide Untersuchungen weisen darauf hin, dass die Annahme eines stationären thermischen Felds für den Großteil des Modelliergebiets zulässig ist. Im orogenen Keil, in dem diese Annahme nicht gilt, wurde das transiente thermische Feld mithilfe der erfolgten Untersuchungen abgeschätzt. Entsprechend kann für das Arbeitsgebiet im Vorland das strukturelle Modell aus dem ersten Schritt zur Berechnung des stationären 3D konduktiven thermischen Feldes herangezogen werden. Basierend auf der ermittelten Dichte- und Temperatur-Konfigurationen konnte anschließend die rheologische Konfiguration berechnet werden. Die rheologischen Analysen zeigen, dass die Lithosphäre in Falten- und Überschiebungsgürteln nur eine gerine Festigkeit besitzt und die Kruste Großteil zur integrierten Festigkeit beiträgt. Das benachbarte Vorlandbecken jedoch weist eine vollständig gekoppelte und starke Lithosphäre auf, weshalb Krustenverkürzung nur im vergleichsweise schwachen orogenen Keil aufgenommen werden kann. Daher komme ich zu der Schlussfolgerung, dass die Abscherhorizonte der Falten- und Überschiebungsgürtel die oberflächennahe Fortsetzung von Scherzonen in der duktilen Kruste unterhalb des Orogens sind. Die Lokalisation der Transferzonen zwischen der duktilen Kruste und dem Abscherhorizont sind dabei maßgeblich durch präexistente Schwächezonen in der Kruste beeinflusst. Im zerbrochenen Vorland der Sierras Pampeanas ist die Lithosphäre vollständig gekoppelt und durch einen Mantel hoher Festigkeit charakterisiert. Die sehr hohe integrierte lithosphärische Festigkeit des zerbrochenen Vorlands verhindert die Bildung von Störungen durch tektonische Kräfte. Selbst krustenskalige Schwächezonen können die Festigkeit nicht ausreichend reduzieren, weshalb eine thermische Schwächung benötigt wird. Daher spielt der Magmatismus, der in direkter Nachbarschaft zu den Schwächezonen in der Sierras Pampeanas nachgewiesen wurde, eine Schlüsselrolle in der Entstehung des zerbrochenen Vorlands. Diese Hypothese erklärt die große räumliche Distanz zwischen den Vorlandsockelüberschiebungen, sowie die beobachtete zeitliche Verzögerung zwischen Magmatismus und Hebung der Gebirgskämme. Die vorliegende Studie kann somit aufgrund Daten-integrativer Modellierung einen kausalen Zusammenhang zwischen der Lithosphärenstruktur, den beobachteten Deformationsmechanismen und unabhängigen geologischen Beobachtungen herstellen. KW - Argentina KW - Rheology KW - Foreland basin KW - Foreland basins KW - Density modelling KW - Chaco-Paraná basin KW - Andes KW - Argentinien KW - Rheologie KW - Vorlandbecken KW - Dichtemodellierung KW - Chaco-Paraná Becken KW - Anden Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439945 ER - TY - THES A1 - Meinke, Anja T1 - Nikotineffekte auf räumliche Aufmerksamkeitsprozesse bei Nichtrauchern T1 - Effects of nicotine on visual attention in non-smokers N2 - Nikotin in den unterschiedlichsten Darreichungsformen verringert bei verschiedenen Spezies im räumlichen Hinweisreizparadigma die Kosten invalider Hinweisreize. Welcher Teilprozess genau durch Nikotin beeinflusst wird, ist bislang nicht untersucht worden. Die gängige Interpretation ist, daß Nikotin das Loslösen von Aufmerksamkeit von einem bisher beachteten Ort erleichtert. In fünf Studien, drei elektrophysiologischen und zwei behavioralen wurden drei mögliche Mechanismen der Nikotinwirkung an Nichtrauchern untersucht. Experiment 1 und 2 gingen der Frage nach, ob Nikotin eine Modulation sensorischer gain Kontrolle bewirkt. Dazu wurden ereigniskorrelierte Potentiale (EKP) im Posner-Paradigma erhoben und die Wirkung von Nikotin auf die aufmerksamkeitsassoziierten Komponenten P1 und N1 betrachtet. Nikotin verringerte die Kosten invalider Hinweisreize bei Aufmerksamkeitslenkung durch endogene Hinweisreize, nicht aber bei exogenen Hinweisreizen. Die P1 und N1 Komponenten zeigten sich unbeeinflusst von Nikotin, damit findet also die Annahme einer Wirkung auf sensorische Suppression keine Unterstützung. In Experiment 3 und 4 wurde untersucht, ob Nikotin einen Effekt auf kostenträchtige unwillkürliche Aufmerksamkeitsverschiebungen, Distraktionen, hat. In Experiment 3 wurden in einem räumlichen Daueraufmerksamkeitsparadigma Distraktionen durch deviante Stimulusmerkmale ausgelöst und die Wirkung von Nikotin auf eine distraktionsassoziierte Komponente des EKP, die P3a, betrachtet. In Experiment 4 wurde in einem Hinweisreizparadigma durch zusätzliche Stimuli eine Distraktion ausgelöst und die Nikotinwirkung auf die Reaktionszeitkosten untersucht. Nikotin zeigte keinen Einfluss auf Distraktionskosten in beiden Studien und auch keine Wirkung auf die P3a Komponente in Experiment 3. In Experiment 4 wurde zusätzlich die Wirkung von Nikotin auf das Loslösen von Aufmerksamkeit untersucht, indem die Schwierigkeit des Loslösens variiert wurde. Auch hier zeigte sich keine Nikotinwirkung. Allerdings konnte in beiden Studien weder die häufig berichtete generelle Reaktionszeitverkürzung noch die Verringerung der Kosten invalider Hinweisreize repliziert werden, so dass zum Einen keine Aussage über die Wirkung von Nikotin auf Distraktionen oder den Aufmerksamkeitsloslöseprozess gemacht werden können, zum Anderen sich die Frage stellte, unter welchen Bedingungen Nikotin einen differentiellen Effekt überhaupt zeigt. Im letzten Experiment wurde hierzu die Häufigkeit der Reaktionsanforderung einerseits und die zeitlichen Aspekte der Aufmerksamkeitslenkung andererseits variiert und der Effekt des Nikotins auf den Validitätseffekt, die Reaktionszeitdifferenz zwischen valide und invalide vorhergesagten Zielreizen, betrachtet. Nikotin verringerte bei Individuen, bei denen Aufmerksamkeitslenkung in allen Bedingungen evident war, in der Tendenz den Validitätseffekt in der ereignisärmsten Bedingung, wenn nur selten willentliche Aufmerksamkeitsausrichtung notwendig war. Dies könnte als Hinweis gedeutet werden, dass Nikotin unter Bedingungen, die große Anforderungen an die Vigilanz stellen, die top-down Zuweisung von Aufmerksamkeitsressourcen unterstützt. N2 - Nicotine has consistently been shown to improve performance on a range of attentional tasks. In spatial cueing (Posner-type) paradigms, where a cue indicates the likely location of a subsequent target stimulus, nicotine influences the ability to react to invalidly cued targets across different species and ways of administration. Previous research suggested that the cholinergic effect is due to a facilitated disengagemant of attention from the cued location. In five studies with nonsmoking subjects, three candidate mechanisms of nicotinic action were examined. Experiment 1 and experiment 2 investigated whether nicotine modulates attentional processes of sensory gain control. In a Posner-paradigm event-related potentials (ERP) were measured and the effect of nicotine on the attention-related components P1 and N1 was assessed. Behaviorally, nicotine reduced the costs of invalid cueing when cues were endogenous, but not with exogenous cues. Electrophysiologically, the P1 and N1 components were not affected by nicotine. These data provide therefore no support for the notion of a nicotine-modulated attentional suppression. In experiment 3 and 4 the effect of nicotine on involuntary distracting attention shifts was investigated. In experiment 3 ERPs were measured in a spatial sustained attention paradigm, where rare changes in a target stimulus attribute were used as distractors. The effect of nicotine on the distraction-associated P3a component was assessed. In experiment 4 the effect of nicotine on the reaction time costs of additional distracting stimuli was studied in a Posner paradigm. In both studies nicotine did not show an effect on distractions, neither in the reaction time costs nor in the parameters of the P3a component. Experiment 4 also investigated whether nicotine has an effect on the disengagement of attention by varying the difficulty of disengaging one's focus from the cued location. Again, nicotine did not show an effect. However, experiment 3 and 4 also neither replicated the commonly reported general nicotinic reduction of reaction times nor the differential reduction of the costs of invalid cueing. Therefore, regarding the effect of nicotine on distraction and on the disengagement of attention the data remain inconclusive. However, these data suggest that there are conditions and mechanisms moderating nicotinic action, that are still unknown. Accordingly, experiment 5 made the attempt to determine such conditions. Response frequency and temporal characteristics of attention orientation were varied. In individuals, who evidently had shifted their attention, nicotine reduced the validity effect under uneventful conditions, when attention was not to be shifted in each trial. This might suggest that nicotine facilitates the top-down allocation of attentional resources in vigilance-demanding situations. KW - Nicotin KW - Aufmerksamkeit KW - Kognition KW - Acetylcholin KW - Ereigniskorreliertes Potenzial KW - attention KW - nicotine KW - actylcholine KW - cognition KW - event-related potentials Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7659 ER - TY - THES A1 - Metz, Malte T1 - Finite fault earthquake source inversions T1 - Ausgedehnte Erdbebenquellinversion BT - implementation and testing of a novel physics-based rupture model BT - Implementierung und Validierung eines neuen selbst-ähnlichen Bruchmodels N2 - Earthquake modeling is the key to a profound understanding of a rupture. Its kinematics or dynamics are derived from advanced rupture models that allow, for example, to reconstruct the direction and velocity of the rupture front or the evolving slip distribution behind the rupture front. Such models are often parameterized by a lattice of interacting sub-faults with many degrees of freedom, where, for example, the time history of the slip and rake on each sub-fault are inverted. To avoid overfitting or other numerical instabilities during a finite-fault estimation, most models are stabilized by geometric rather than physical constraints such as smoothing. As a basis for the inversion approach of this study, we build on a new pseudo-dynamic rupture model (PDR) with only a few free parameters and a simple geometry as a physics-based solution of an earthquake rupture. The PDR derives the instantaneous slip from a given stress drop on the fault plane, with boundary conditions on the developing crack surface guaranteed at all times via a boundary element approach. As a side product, the source time function on each point on the rupture plane is not constraint and develops by itself without additional parametrization. The code was made publicly available as part of the Pyrocko and Grond Python packages. The approach was compared with conventional modeling for different earthquakes. For example, for the Mw 7.1 2016 Kumamoto, Japan, earthquake, the effects of geometric changes in the rupture surface on the slip and slip rate distributions could be reproduced by simply projecting stress vectors. For the Mw 7.5 2018 Palu, Indonesia, strike-slip earthquake, we also modelled rupture propagation using the 2D Eikonal equation and assuming a linear relationship between rupture and shear wave velocity. This allowed us to give a deeper and faster propagating rupture front and the resulting upward refraction as a new possible explanation for the apparent supershear observed at the Earth's surface. The thesis investigates three aspects of earthquake inversion using PDR: (1) to test whether implementing a simplified rupture model with few parameters into a probabilistic Bayesian scheme without constraining geometric parameters is feasible, and whether this leads to fast and robust results that can be used for subsequent fast information systems (e.g., ground motion predictions). (2) To investigate whether combining broadband and strong-motion seismic records together with near-field ground deformation data improves the reliability of estimated rupture models in a Bayesian inversion. (3) To investigate whether a complex rupture can be represented by the inversion of multiple PDR sources and for what type of earthquakes this is recommended. I developed the PDR inversion approach and applied the joint data inversions to two seismic sequences in different tectonic settings. Using multiple frequency bands and a multiple source inversion approach, I captured the multi-modal behaviour of the Mw 8.2 2021 South Sandwich subduction earthquake with a large, curved and slow rupturing shallow earthquake bounded by two faster and deeper smaller events. I could cross-validate the results with other methods, i.e., P-wave energy back-projection, a clustering analysis of aftershocks and a simple tsunami forward model. The joint analysis of ground deformation and seismic data within a multiple source inversion also shed light on an earthquake triplet, which occurred in July 2022 in SE Iran. From the inversion and aftershock relocalization, I found indications for a vertical separation between the shallower mainshocks within the sedimentary cover and deeper aftershocks at the sediment-basement interface. The vertical offset could be caused by the ductile response of the evident salt layer to stress perturbations from the mainshocks. The applications highlight the versatility of the simple PDR in probabilistic seismic source inversion capturing features of rather different, complex earthquakes. Limitations, as the evident focus on the major slip patches of the rupture are discussed as well as differences to other finite fault modeling methods. N2 - Erdbebenmodelle sind der Schlüssel zu einem detaillierten Verständnis der zugrunde liegenden Bruchprozesse. Die kinematischen oder dynamischen Brucheigenschaften werden mit Hilfe von ausgedehnten Bruchmodellen bestimmt. Dadurch können Details, wie z.B. die Bruchrichtung und -geschwindigkeit oder die Verschiebungsverteilung, aufgelöst werden. Häufig sind ausgedehnte Bruchmodelle durch sehr viele freie Parameter definiert, etwa individuelle Verschiebungen und Verschiebungsrichtungen auf den diskretisierten Bruchflächenelementen. Die große Anzahl an Parametern sorgt dafür, dass Inversionsprobleme hochgradig unterbestimmt sind. Um daraus resultierende numerische Instabilitäten zu verhinden, werden diese Modelle häufig mit zusätzlichen eher geometrischen als physikalischen Annahmen stabilisiert, z.B. im Bezug auf die Rauigkeit der Verschiebung auf der Bruchfläche. Die Basis für die Inversionsmethode in dieser Dissertaton bildet das von uns entwickelete pseudo-dynamische Bruchmodel (PDR). Die PDR basiert auf wenigen freien Parametern und einer simplen, planaren Geometrie und ergibt eine physik-gestützte Lösung für Erdbebenbrüche. Die PDR bestimmt die instantane Verschiebung basierend auf gegebenen Spannungsänderungen auf der Bruchfläche. Die Randbedingung der Spannungsänderung wird dabei zu jedem Zeitpunkt der Bruchentwicklung über eine Randelementmethode eingehalten. Als Nebenprodukt dessen kann die Herdzeitfunktion an jedem Punkt der Bruchfläche als Ergebnis des Models bestimmt werden, und muss daher nicht vorher definiert werden. Der PDR-Modellierungsansatz wurde mit anderen Modellen anhand verschiedener Erdbeben verglichen. Am Beispiel des Mw 7,1 2016 Kumamoto, Japan, Bebens konnte der Effekt einer gekrümmten Bruchfläche auf die daraus resultierenden Verschiebungsverteilung und Verschiebungsraten durch eine Projezierung der Spannungsvektoren reproduziert werden. Für das Mw 7,5 2018 Palu, Indonesien, Beben haben wir die Bruchausbreitung auf Grundlage der 2D-Eikonalgleichung und basierend auf einem angenommenen linearen Zusammenhang zwischen Bruch- und Scherwellengeschwindigkeit modelliert. Dadurch konnten wir die beobachtete Supershear-Bruchausbreitung als Ergebnis einer möglichen tiefen und daher schnelleren Bruchfront mit einer Abstrahlung an die Erdoberfläche erklären. Der PDR-Vorwärtsmodellierungs-Code wurde in den Open-Source Python Paketen Pyrocko und Grond veröffentlicht. Meine Dissertation beleuchtet drei Aspekte der Erdbebeninversion unter Zuhilfenahme der PDR: (1) Ist eine Implementation eines simplen Bruchmodels mit wenigen Parametern in ein probabalistisches Bayesisches Inversionsprogramm möglich? Kann dies schnelle und robuste Ergebnisse für weitere Folgeanwendungen, wie Bodenbeschleunigungsvorhersagen, liefern? (2) Wie hilft die Kombination aus seismischen Breitband- und Accelerometerdaten mit Nahfelddeformationsdaten, Inversionsergebnisse mit der PDR zu verbessern? (3) Können komplexe Brüche über einen multiplen PDR-Quellinversionsansatz aufgelöst werden und wenn ja, wann ist dies möglich? Ich habe den PDR-Inversionsansatz entwickelt und auf zwei Erdbeben-Sequenzen in verschiedenen tektonischen Umgebungen angewandt. Mit Hilfe von verschiedenen Datensätzen in mehreren Frequenzbändern innerhalb von einfachen und multiplen Bruchflächeninversionen konnte ich das multi-modale Mw 8,2 2021 South Sandwich Erdbeben characterisieren. Dieses bestand aus einem langen, flachen, langsam brechenden Beben entlang der gekrümmten Subduktionszone, welches durch zwei kleinere, tiefere Brüche mit schnelleren Bruchgeschwindigkeiten begrenzt wurde. Die Validierung mit Ergebnissen aus einer P-Wellen Back-Projection, der Clusteranalyse von Nachbeben und einer Tsunami-Modelierung zeigten eine hohe Konsistenz mit den PDR-Resultaten. Die Kombination von seismischen Daten und Oberflächendeformationen in einer multiplen PDR-Inversion habe ich auch zur Analyse eines Beben-Triplets vom Juni 2022 im Südosten des Irans genutzt. Die Inversionen konnten im Zusammenspiel mit relokalisierten Nachbeben einen neuen Fall von vertikaler Haupt-/Nachbebenseparation auflösen. Während die großen Hauptbeben im flachen Sediment stattfanden, sind die Nachbeben hauptsächlich entlang der tieferen Grenzfläche zwischen Sediment und kristallinem Grundgebirge aufgetreten. Eine Erklärung dafür ist das duktile Fließen einer vorhandenen Salzschicht auf der Grenzfläche, ausgelöst durch Spannungsänderungen im Zuge der Hauptbeben. Die Anwendungen konnten die Vielseitigkeit der PDR als simples Quellmodel innerhalb von seismischen Quellinversionen zeigen. Limitierungen der Inversion, wie der augenscheinliche Fokus auf den Hauptverschiebungsbereich eines Bebens, werden in dieser Arbeit genauso diskutiert wie die Einordnung der PDR im Vergleich zu anderen ausgedehnten Quellmodellen. KW - seismology KW - inversion KW - source model KW - Seismologie KW - Inversion KW - Bruchmodel Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619745 ER - TY - THES A1 - Michalik-Onichimowska, Aleksandra T1 - Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry N2 - Eine nachhaltigere chemische Industrie erfordert eine Minimierung der Lösungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgeführt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergrößerung des Volumens des Reaktionsmediums geht immer mit der Vergrößerung der Oberfläche einher, die mit dem begrenzenden Gefäß in Kontakt steht. Da das Volumen kubisch, während die Oberfläche quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verhältnis nicht linear zu. Viele an der Grenzfläche zwischen Oberfläche und Flüssigkeit auftretende Phänomene können die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung führt. Die Anwendung von schwebenden Tropfen als behälterlose Reaktionsgefäße bietet eine vielversprechende Möglichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer für die Echtzeitüberwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgefäße fungieren. Das Design des Systems umfasst die berührungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verständnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verständnis dieses Phänomens ist entscheidend, um den Effekt der zeitlichen und räumlichen Auflösung der erzeugten Ionenwolke zu verstehen, die die Auflösung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzflächenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollständig berücksichtigen. Für die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulslängen untersucht, nämlich im ns- und µs-Bereich. Die Bestrahlung über µs-Laserpulse bietet gegenüber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es ermöglichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz führt zu weniger ausgeprägten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld rückgeschlagen, was zum Verlust der Probe führen würde; iii) die milde Laserbestrahlung führt zu einer besseren räumlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Auflösung der detektierten Ionenpakete führt. Schließlich ermöglicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der Nähe des Tropfens ermöglicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu führen. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Moleküle als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgeführt und online überwacht. Für eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten. N2 - One aspect of achieving a more sustainable chemical industry is the minimization of the usage of solvents and chemicals. Thus, optimization and development of chemical processes for large-scale production is favourably performed in small batches. The critical step in this approach is upscaling the batches from the small reaction systems to the large reactors mandatory for cost efficient production in an industrial environment. Scaling up the bulk volume always goes along with increasing the surface where the reaction medium is in contact with the confining vessel. Since volume scales proportional with the cubic dimension while the surface scales quadratic, their ratio is size-dependent. The influence of reaction vessel walls can change the reaction performance. A number of phenomena occurring at the surface-liquid interface can affect reaction rates and yields, resulting in possible difficulties in predicting and extrapolating from small size production scale to large industrial processes. The application of levitated droplets as a containerless reaction vessels provides a promising possibility to avoid the above-mentioned issues. In the presented work, an efficient coupling of acoustically levitated droplets to an ion mobility (IM) spectrometer, operating at ambient conditions, was designed for real-time monitoring of chemical reactions. The design of the system comprises noncontact sampling and ionization of the droplet realised by laser desorption/ionization at 2,94 µm. The scope of the work includes fundamental studies covering understanding of laser irradiation of droplets enclosed in an acoustical field. Understanding of this phenomenon is crucial to comprehending the effects of temporal and spatial resolution of the generated ion plume that influence the resolution of the system. The set-up includes an acoustic trap, laser irradiation and ion manipulation electrostatic lenses operating at high voltage at ambient pressure. The complexity of the design needs to fully be considered for an effective ion transfer at the interface region between the levitated droplet and IM spectrometer. For sampling and ionization, two distinct laser pulse lengths were evaluated, ns and µs. Irradiation via µs laser pulses provides several advantages: i) the droplet volume is not extensively impinged, as in case of ns laser pulses, allowing the sampling of only the small volume of the droplet; ii) the lower fluence results in less pronounced oscillations of the droplet confined in the acoustic field. The droplet will not be dissipated out of the acoustic field leading to loss of the sample; iii) the mild laser irradiation results in better spatial and temporal ion plume confinement, leading to better resolution of the detected ion packets. Finally, this knowledge allows the application of ion optics necessary to induce ion flow between the droplet suspended in the acoustic field and the IM spectrometer. The ion optics, composed of 2 electrostatic lenses placed in the near vicinity of the droplet, allow effective focusing of the ion plume and its redirection directly to the IM spectrometer entrance. This novel coupling has proved to be successful for detection of some simple molecules ionizable at the 2.94 µm wavelength. To further demonstrate the applicability of the system, a proof-of-principle reaction was selected, fulfilling the requirements of the system, and was subjected to comprehensive investigation of its performance. Herein, the reaction between N-Boc cysteine methyl ester and allyl alcohol has been performed in a batch reactor and on-line monitored via 1H NMR to establish reaction propagation. With the additional assessment, it was confirmed that the thiol-ene coupling can be performed within first 20 minutes of the irradiation with a reaction yield above 50%, proving that the reaction can be applied as a study case to assess the possibilities of the developed system. T2 - Echtzeit-Überwachung von (Photo)chemischen Reaktionen in Mikroströmungsreaktoren und schwebenden Tropfen durch IR-MALDI Ionenmoblität- und Massenspektrometrie KW - ion mobility spectrometry KW - mass spectrometry KW - acoustically levitated droplets KW - photochemical reactions KW - akustisch schwebende Tropfen KW - Ionenmobilitätspektrometrie KW - Massenspektrometrie KW - Photochemische Reaktionen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557298 ER - TY - THES A1 - Milke, Bettina T1 - Synthese von Metallnitrid- und Metalloxinitridnanopartikeln für energierelevante Anwendungen T1 - Synthesis of metal nitride and metal oxynitride nanoparticles for energy related applications N2 - Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind. N2 - The development of new methods toward alternative clean energy production and efficient energy storage is a hot topic nowadays. In this context nanoscience has an important role to find suitable ways of increasing the efficiency of storage and production of energy of already known materials and new materials. However, until now the most well-known syntheses of MnN0,43 and Zr2ON2 nanoparticles lead to undefined particles. A simple, cheap and safe synthesis would offer the possibility of broader applications and scalability. We herein present the so-called urea-glass route which is used as a sol-gel process. This synthetic route leads to well-defined particle sizes, novel particle morphologies and allows the tailoring of the desired products. In the case of the synthesis of manganese nitride nanoparticles (MnN0,43), nanoparticles with a core-shell structure are obtained, their use as conversion materials in batteries is first introduced. On the other hand, the formation of zirconium oxynitride nanoparticles (Zr2ON2) can be easily influenced by varying the reaction conditions such as the amount of urea or the reaction temperature. The addition of small amounts of salt prevents the formation of carbon in the final product, leading to yellow Zr2ON2 nanoparticles with a size of d = 8 nm which show semiconductor behavior. KW - Nitride KW - Oxinitride KW - Nano KW - Li-Batterien KW - Harnstoff-Glas-Route KW - Nitrides KW - Oxynitrides KW - Nano KW - Li-batteries KW - Urea-Glas-Route Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60008 ER - TY - THES A1 - Miteva, Rositsa Stoycheva T1 - Electron acceleration at localized wave structures in the solar corona T1 - Elektronenbeschleunigung an lokalen Wellenstrukturen in der Sonnenkorona N2 - Our dynamic Sun manifests its activity by different phenomena: from the 11-year cyclic sunspot pattern to the unpredictable and violent explosions in the case of solar flares. During flares, a huge amount of the stored magnetic energy is suddenly released and a substantial part of this energy is carried by the energetic electrons, considered to be the source of the nonthermal radio and X-ray radiation. One of the most important and still open question in solar physics is how the electrons are accelerated up to high energies within (the observed in the radio emission) short time scales. Because the acceleration site is extremely small in spatial extent as well (compared to the solar radius), the electron acceleration is regarded as a local process. The search for localized wave structures in the solar corona that are able to accelerate electrons together with the theoretical and numerical description of the conditions and requirements for this process, is the aim of the dissertation. Two models of electron acceleration in the solar corona are proposed in the dissertation: I. Electron acceleration due to the solar jet interaction with the background coronal plasma (the jet--plasma interaction) A jet is formed when the newly reconnected and highly curved magnetic field lines are relaxed by shooting plasma away from the reconnection site. Such jets, as observed in soft X-rays with the Yohkoh satellite, are spatially and temporally associated with beams of nonthermal electrons (in terms of the so-called type III metric radio bursts) propagating through the corona. A model that attempts to give an explanation for such observational facts is developed here. Initially, the interaction of such jets with the background plasma leads to an (ion-acoustic) instability associated with growing of electrostatic fluctuations in time for certain range of the jet initial velocity. During this process, any test electron that happen to feel this electrostatic wave field is drawn to co-move with the wave, gaining energy from it. When the jet speed has a value greater or lower than the one, required by the instability range, such wave excitation cannot be sustained and the process of electron energization (acceleration and/or heating) ceases. Hence, the electrons can propagate further in the corona and be detected as type III radio burst, for example. II. Electron acceleration due to attached whistler waves in the upstream region of coronal shocks (the electron--whistler--shock interaction) Coronal shocks are also able to accelerate electrons, as observed by the so-called type II metric radio bursts (the radio signature of a shock wave in the corona). From in-situ observations in space, e.g., at shocks related to co-rotating interaction regions, it is known that nonthermal electrons are produced preferably at shocks with attached whistler wave packets in their upstream regions. Motivated by these observations and assuming that the physical processes at shocks are the same in the corona as in the interplanetary medium, a new model of electron acceleration at coronal shocks is presented in the dissertation, where the electrons are accelerated by their interaction with such whistlers. The protons inflowing toward the shock are reflected there by nearly conserving their magnetic moment, so that they get a substantial velocity gain in the case of a quasi-perpendicular shock geometry, i.e, the angle between the shock normal and the upstream magnetic field is in the range 50--80 degrees. The so-accelerated protons are able to excite whistler waves in a certain frequency range in the upstream region. When these whistlers (comprising the localized wave structure in this case) are formed, only the incoming electrons are now able to interact resonantly with them. But only a part of these electrons fulfill the the electron--whistler wave resonance condition. Due to such resonant interaction (i.e., of these electrons with the whistlers), the electrons are accelerated in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona. N2 - Die Sonne ist ein aktiver Stern, was sich nicht nur in den allseits bekannten Sonnenflecken, sondern auch in Flares manifestiert. Während Flares wird eine große Menge gespeicherter, magnetischer Energie in einer kurzen Zeit von einigen Sekunden bis zu wenigen Stunden in der Sonnenkorona freigesetzt. Dabei werden u.a. energiereiche Elektronen erzeugt, die ihrerseits nichtthermische Radio- und Röntgenstrahlung, wie sie z.B. am Observatorium für solare Radioastronomie des Astrophysikalischen Instituts Potsdam (AIP) in Tremsdorf und durch den NASA-Satelliten RHESSI beobachtet werden, erzeugen. Da diese Elektronen einen beträchtlichen Anteil der beim Flare freigesetzten Energie tragen, ist die Frage, wie Elektronen in kurzer Zeit auf hohe Energien in der Sonnenkorona beschleunigt werden, von generellem astrophysikalischen Interesse, da solche Prozesse auch in anderen Sternatmosphären und kosmischen Objekten, wie z.B. Supernova-Überresten, stattfinden. In der vorliegenden Dissertation wird die Elektronenbeschleunigung an lokalen Wellenstrukturen im Plasma der Sonnenkorona untersucht. Solche Wellen treten in der Umgebung der magnetischen Rekonnektion, die als ein wichtiger Auslöser von Flares angesehen wird, und in der Nähe von Stoßwellen, die infolge von Flares erzeugt werden, auf. Generell werden die Elektronen als Testteilchen behandelt. Sie werden durch ihre Wechselwirkung mit den elektrischen und magnetischen Feldern, die mit den Plasmawellen verbunden sind, beschleunigt. Infolge der magnetischen Rekonnektion als Grundlage des Flares werden starke Plasmaströmungen (sogenannte Jets) erzeugt. Solche Jets werden im Licht der weichen Röntgenstrahlung, wie z.B. durch den japanischen Satelliten YOHKOH, beobachtet. Mit solchen Jets sind solare Typ III Radiobursts als Signaturen von energiereichen Elektronenstrahlen in der Sonnenkorona verbunden. Durch die Wechselwirkung eines Jets mit dem umgebenden Plasma werden lokal elektrische Felder erzeugt, die ihrerseits Elektronen beschleunigen können. Dieses hier vorgestellte Szenarium kann sehr gut die Röntgen- und Radiobeobachtungen von Jets und den damit verbundenen Elektronenstrahlen erklären. An koronalen Stoßwellen, die infolge Flares entstehen, werden Elektronen beschleunigt, deren Signatur man in der solaren Radiostrahlung in Form von sogenannten Typ II Bursts beobachten kann. Stoßwellen in kosmischen Plasmen können mit Whistlerwellen (ein spezieller Typ von Plasmawellen) verbunden sein. In der vorliegenden Arbeit wird ein Szenarium vorgestellt, das aufzeigt, wie solche Whistlerwellen an koronalen Stoßwellen erzeugt werden und durch ihre resonante Wechselwirkung mit den Elektronen dieselben beschleunigen. Dieser Prozess ist effizienter als bisher vorgeschlagene Mechanismen und kann deshalb auch auf andere Stoßwellen im Kosmos, wie z.B. an Supernova-Überresten, zur Erklärung der dort erzeugten Radio- und Röntgenstrahlung dienen. KW - Elektronenbeschleunigung KW - Sonnenkorona KW - Jets KW - Stoßwellen KW - Nichtlineare Wellen KW - Electron acceleration KW - Solar corona KW - Jets KW - Shock waves KW - Nonlinear waves Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14775 ER - TY - THES A1 - Morgenstern, Anne T1 - Thermokarst and thermal erosion : degradation of Siberian ice-rich permafrost T1 - Thermokarst und Thermoerosion : Degradation von sibirischem eisreichem Permafrost N2 - Current climate warming is affecting arctic regions at a faster rate than the rest of the world. This has profound effects on permafrost that underlies most of the arctic land area. Permafrost thawing can lead to the liberation of considerable amounts of greenhouse gases as well as to significant changes in the geomorphology, hydrology, and ecology of the corresponding landscapes, which may in turn act as a positive feedback to the climate system. Vast areas of the east Siberian lowlands, which are underlain by permafrost of the Yedoma-type Ice Complex, are particularly sensitive to climate warming because of the high ice content of these permafrost deposits. Thermokarst and thermal erosion are two major types of permafrost degradation in periglacial landscapes. The associated landforms are prominent indicators of climate-induced environmental variations on the regional scale. Thermokarst lakes and basins (alasses) as well as thermo-erosional valleys are widely distributed in the coastal lowlands adjacent to the Laptev Sea. This thesis investigates the spatial distribution and morphometric properties of these degradational features to reconstruct their evolutionary conditions during the Holocene and to deduce information on the potential impact of future permafrost degradation under the projected climate warming. The methodological approach is a combination of remote sensing, geoinformation, and field investigations, which integrates analyses on local to regional spatial scales. Thermokarst and thermal erosion have affected the study region to a great extent. In the Ice Complex area of the Lena River Delta, thermokarst basins cover a much larger area than do present thermokarst lakes on Yedoma uplands (20.0 and 2.2 %, respectively), which indicates that the conditions for large-area thermokarst development were more suitable in the past. This is supported by the reconstruction of the development of an individual alas in the Lena River Delta, which reveals a prolonged phase of high thermokarst activity since the Pleistocene/Holocene transition that created a large and deep basin. After the drainage of the primary thermokarst lake during the mid-Holocene, permafrost aggradation and degradation have occurred in parallel and in shorter alternating stages within the alas, resulting in a complex thermokarst landscape. Though more dynamic than during the first phase, late Holocene thermokarst activity in the alas was not capable of degrading large portions of Pleistocene Ice Complex deposits and substantially altering the Yedoma relief. Further thermokarst development in existing alasses is restricted to thin layers of Holocene ice-rich alas sediments, because the Ice Complex deposits underneath the large primary thermokarst lakes have thawed completely and the underlying deposits are ice-poor fluvial sands. Thermokarst processes on undisturbed Yedoma uplands have the highest impact on the alteration of Ice Complex deposits, but will be limited to smaller areal extents in the future because of the reduced availability of large undisturbed upland surfaces with poor drainage. On Kurungnakh Island in the central Lena River Delta, the area of Yedoma uplands available for future thermokarst development amounts to only 33.7 %. The increasing proximity of newly developing thermokarst lakes on Yedoma uplands to existing degradational features and other topographic lows decreases the possibility for thermokarst lakes to reach large sizes before drainage occurs. Drainage of thermokarst lakes due to thermal erosion is common in the study region, but thermo-erosional valleys also provide water to thermokarst lakes and alasses. Besides these direct hydrological interactions between thermokarst and thermal erosion on the local scale, an interdependence between both processes exists on the regional scale. A regional analysis of extensive networks of thermo-erosional valleys in three lowland regions of the Laptev Sea with a total study area of 5,800 km² found that these features are more common in areas with higher slopes and relief gradients, whereas thermokarst development is more pronounced in flat lowlands with lower relief gradients. The combined results of this thesis highlight the need for comprehensive analyses of both, thermokarst and thermal erosion, in order to assess past and future impacts and feedbacks of the degradation of ice-rich permafrost on hydrology and climate of a certain region. N2 - Die gegenwärtige Klimaerwärmung wirkt sich auf arktische Regionen stärker aus als auf andere Gebiete der Erde. Das hat weitreichende Konsequenzen für Permafrost, der weite Teile der terrestrischen Arktis unterlagert. Das Tauen von Permafrost kann zur Freisetzung erheblicher Mengen an Treibhausgasen sowie zu gravierenden Änderungen in der Geomorphologie, Hydrologie und Ökologie betroffener Landschaften führen, was wiederum als positive Rückkopplung auf das Klimasystem wirken kann. Ausgedehnte Gebiete der ostsibirischen Tiefländer, die mit Permafrost des Yedoma Eiskomplex unterlagert sind, gelten aufgrund des hohen Eisgehalts dieser Permafrostablagerungen als besonders empfindlich gegenüber Klimaerwärmungen. Thermokarst und Thermoerosion sind zwei Hauptformen der Permafrostdegradation in periglazialen Landschaften. Die zugehörigen Landschaftsformen sind auf der regionalen Skala bedeutende Indikatoren klimainduzierter Umweltvariationen. Thermokarstseen und senken (Alasse) sowie Thermoerosionstäler sind in den Küstentiefländern der Laptewsee weit verbreitet. Die vorliegende Dissertation untersucht die räumliche Verbreitung und die morphometrischen Eigenschaften dieser Degradationsformen mit dem Ziel, ihre Entwicklungsbedingungen während des Holozäns zu rekonstruieren und Hinweise auf potenzielle Auswirkungen zukünftiger Permafrostdegradation im Zuge der erwarteten Klimaerwärmung abzuleiten. Der methodische Ansatz ist eine Kombination aus Fernerkundungs-, Geoinformations- und Geländeuntersuchungen, die Analysen auf lokalen bis regionalen räumlichen Skalen integriert. Thermokarst und Thermoerosion haben die Untersuchungsregion tiefgreifend geprägt. Im Eiskomplexgebiet des Lena-Deltas nehmen Thermokarstsenken eine weitaus größere Fläche ein als Thermokarstseen auf Yedoma-Hochflächen (20,0 bzw. 2,2 %), was darauf hin deutet, dass die Bedingungen für die Entwicklung von großflächigem Thermokarst in der Vergangenheit wesentlich günstiger waren als heute. Die Rekonstruktion der Entwicklung eines einzelnen Alas im Lena-Delta belegt eine andauernde Phase hoher Thermokarstaktivität seit dem Übergang vom Pleistozän zum Holozän, die zur Entstehung einer großen und tiefen Senke führte. Nach der Drainage des primären Thermokarstsees im mittleren Holozän erfolgten Permafrostaggradation und degradation parallel und in kürzeren abwechselnden Etappen innerhalb des Alas und führten zu einer komplexen Thermokarstlandschaft. Trotzdem die spätholozäne Thermokarstentwicklung im Alas dynamischer ablief als die erste Entwicklungsphase, resultierte sie nicht in der Degradation großer Teile pleistozäner Eiskomplexablagerungen und einer wesentlichen Veränderung des Yedoma-Reliefs. Weitere Thermokarstentwicklung in bestehenden Alassen ist begrenzt auf geringmächtige Lagen holozäner eisreicher Alas-Sedimente, da die Eiskomplexablagerungen unter den großen primären Thermokarstseen vollständig getaut waren und die unterlagernden Sedimente aus eisarmen, fluvialen Sanden bestehen. Thermokarstprozesse auf ungestörten Yedoma-Hochflächen wirken am stärksten verändernd auf Eiskomplexablagerungen, werden aber in Zukunft auf geringere Ausmaße begrenzt sein, da die Verfügbarkeit großer ungestörter, schwach drainierter Yedoma-Hochflächen abnimmt. Auf der Insel Kurungnakh im zentralen Lena-Delta beträgt der für zukünftige Thermokarstentwicklung verfügbare Anteil an Yedoma-Hochflächen nur 33,7 %. Die zunehmende Nähe von sich entwickelnden Thermokarstseen auf Yedoma-Hochflächen zu bestehenden Degradationsstrukturen und anderen negativen Reliefformen verringert die Möglichkeit der Thermokarstseen, große Ausmaße zu erreichen bevor sie drainieren. Die Drainage von Thermokarstseen durch Thermoerosion ist in der Untersuchungsregion weit verbreitet, aber Thermoerosionstäler versorgen Thermokarstseen und –senken auch mit Wasser. Neben diesen direkten hydrologischen Wechselwirkungen zwischen Thermokarst und Thermoerosion auf der lokalen Ebene existiert auch eine Interdependenz zwischen beiden Prozessen auf der regionalen Ebene. Eine regionale Analyse weitreichender Netze von Thermoerosionstälern in drei Tieflandgebieten der Laptewsee mit einer Fläche von insgesamt 5800 km² zeigte, dass diese Formen häufiger in Gebieten mit höheren Geländeneigungen und Reliefgradienten auftreten, während Thermokarstentwicklung stärker in flachen Tiefländern mit geringeren Reliefgradienten ausgeprägt ist. Die kombinierten Ergebnisse dieser Dissertation zeigen die Notwendigkeit von umfassenden Analysen beider Prozesse und Landschaftsformen, Thermokarst und Thermoerosion, im Hinblick auf die Abschätzung vergangener und zukünftiger Auswirkungen der Degradation eisreichen Permafrosts auf Hydrologie und Klima der betrachteten Region und deren Rückkopplungen. KW - Fernerkundung KW - GIS KW - räumliche Analyse KW - periglaziale Landschaften KW - Arktis KW - remote sensing KW - GIS KW - spatial analyses KW - periglacial landscapes KW - Arctic Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62079 ER - TY - THES A1 - Mubeen, Umarah T1 - Regulation of central carbon and nitrogen metabolism by Target of Rapamycin (TOR) kinase in Chlamydomonas reinhardtii T1 - Regulation des zentralen Kohlen- und Stickstoff Stoffwechsels durch die Target of Rapamycin Kinase in der Grünalge Chlamydomonas reinhardtii N2 - The highly conserved protein complex containing the Target of Rapamycin (TOR) kinase is known to integrate intra- and extra-cellular stimuli controlling nutrient allocation and cellular growth. This thesis describes three studies aimed to understand how TOR signaling pathway influences carbon and nitrogen metabolism in Chlamydomonas reinhardtii. The first study presents a time-resolved analysis of the molecular and physiological features across the diurnal cycle. The inhibition of TOR leads to 50% reduction in growth followed by nonlinear delays in the cell cycle progression. The metabolomics analysis showed that the growth repression is mainly driven by differential carbon partitioning between anabolic and catabolic processes. Furthermore, the high accumulation of nitrogen-containing compounds indicated that TOR kinase controls the carbon to nitrogen balance of the cell, which is responsible for biomass accumulation, growth and cell cycle progression. In the second study the cause of the high accumulation of amino acids is explained. For this purpose, the effect of TOR inhibition on Chlamydomonas was examined under different growth regimes using stable 13C- and 15N-isotope labeling. The data clearly showed that an increased nitrogen uptake is induced within minutes after the inhibition of TOR. Interestingly, this increased N-influx is accompanied by increased activities of nitrogen assimilating enzymes. Accordingly, it was concluded that TOR inhibition induces de-novo amino acid synthesis in Chlamydomonas. The recognition of this novel process opened an array of questions regarding potential links between central metabolism and TOR signaling. Therefore a detailed phosphoproteomics study was conducted to identify the potential substrates of TOR pathway regulating central metabolism. Interestingly, some of the key enzymes involved in carbon metabolism as well as amino acid synthesis exhibited significant changes in the phosphosite intensities immediately after TOR inhibition. Altogether, these studies provide a) detailed insights to metabolic response of Chlamydomonas to TOR inhibition, b) identification of a novel process causing rapid upshifts in amino acid levels upon TOR inhibition and c) finally highlight potential targets of TOR signaling regulating changes in central metabolism. Further biochemical and molecular investigations could confirm these observations and advance the understanding of growth signaling in microalgae. N2 - Target of Rapamycin (TOR) ist das Zentralprotein eines hochkonservierten Proteinkomplexes, welcher Nährstoff- und Energie Ressourcen für zelluläre Wachstumsprozesse kontengiert. Diese Doktorarbeit beschreibt anhand dreier Studien, wie TOR zu diesem Zweck, in der Grünalge Chlamydomonas reinhardtii, den zentralen Stoffwechsel reguliert. Die erste Studie untersucht dazu das zeitaufgelöste Verhalten von Biomolekülen im Tagesverlauf synchronisiert wachsender Algen. Dabei konnte gezeigt werden, das der TOR Inhibitor Rapamycin das Wachstum um 50% reduziert und den Zellzyklus verzögert. Die Zellzyklus Verzögerung scheint dabei hauptsächlich durch veränderte Stoffwechselprozesse erklärt zu sein. Hierbei konnte gezeigt werden, dass TOR vor allem stickstoffhaltige Stoffwechselprodukte (z.B. Aminosäuren) kontrolliert, welche die Grundlage für Biomasseproduktion, Wachstum und den Zellzyklus bilden. Im Rahmen der zweiten Studie konnte dann der molekulare Mechanismus der Akkumulation der zellulären Aminosäuren aufgeklärt werden. Zu diesem Zweck wurden Fütterungsstudien mit 13C- und 15N-Isotopen durchgeführt. Die Ergebnisse dieser Fütterung konnten klar zeigen, dass die Inhibition von TOR zur verstärkten Aufnahme von Stickstoff in die Zelle und dessen Assimilierung in Aminosäuren führt. Die Aufdeckung dieses neuen, von TOR gesteuerten Prozesses eröffnete somit die Frage, wie die Signalkaskade von TOR zu den Enzymen der Aminosäuresynthese verläuft. Detaillierte phosphoproteomische Studien sollten dieser Frage nachgehen und Zielprotein der TOR Kinase zu identifizieren und regulierte Stoffwechselprozesses zu finden. Dabei stellte sich heraus, dass sowohl verschiedene Enzyme der Aminosäuresynthese als auch Enzyme des zentralen Stoffwechsels innerhalb weniger Minuten stark verändert wurden. Zusammenfassend kann man festhalten das die vorliegende Arbeit detaillierte Stoffwechselanalysen des Stoffwechsels nach einer TOR Inhibition aufdeckt. Hierbei ein neuer Mechanismus zur Regulation der Aminosäuresynthese, nach TOR Inhibition gezeigt werden konnte, welche durch systemische Regulation der Phosphorylierungsmuster zellulärer Proteine kontrolliert wird. Zusätzliche molekulare und biochemische Studien konnten weiterhin zeigen, dass wie TOR das zelluläre Wachstum der photosynthetischen Grünalge kontrolliert und somit steuert. KW - Target of Rapamycin kinase KW - Growth signaling KW - metabolism KW - phosphoproteomics KW - Chlamydomonas KW - Target of Rapamycin kinase KW - Wachstumssignale KW - Stoffwechsel KW - Phosphoproteomik KW - Chlamydomonas Y1 - 2018 ER - TY - THES A1 - Mörbt, Nora T1 - Differential proteome analysis of human lung epithelial cells following exposure to aromatic volatile organic compounds T1 - Differentielle Proteomeanalyse humaner Lungenepithelzellen nach Exposition mit aromatischen flüchtigen Substanzen N2 - The widespread usage of products containing volatile organic compounds (VOC) has lead to a general human exposure to these chemicals in work places or homes being suspected to contribute to the growing incidence of environmental diseases. Since the causal molecular mechanisms for the development of these disorders are not completely understood, the overall objective of this thesis was to investigate VOC-mediated molecular effects on human lung cells in vitro at VOC concentrations comparable to exposure scenarios below current occupational limits. Although differential expression of single proteins in response to VOCs has been reported, effects on complex protein networks (proteome) have not been investigated. However, this information is indispensable when trying to ascertain a mechanism for VOC action on the cellular level and establishing preventive strategies. For this study, the alveolar epithelial cell line A549 has been used. This cell line, cultured in a two-phase (air/liquid) model allows the most direct exposure and had been successfully applied for the analysis of inflammatory effects in response to VOCs. Mass spectrometric identification of 266 protein spots provided the first proteomic map of A549 cell line to this extent that may foster future work with this frequently used cellular model. The distribution of three typical air contaminants, monochlorobenzene (CB), styrene and 1,2 dichlorobenzene (1,2-DCB), between gas and liquid phase of the exposure model has been analyzed by gas chromatography. The obtained VOC partitioning was in agreement with available literature data. Subsequently the adapted in vitro system has been successfully employed to characterize the effects of the aromatic compound styrene on the proteome of A549 cells (Chapter 4). Initially, the cell toxicity has been assessed in order to ensure that most of the concentrations used in the following proteomic approach were not cytotoxic. Significant changes in abundance and phosphorylation in the total soluble protein fraction of A549 cells have been detected following styrene exposure. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. Validation experiments on protein and transcript level confirmed the results of the 2-DE experiments. From the results, two main cellular pathways have been identified that were induced by styrene: the cellular oxidative stress response combined with moderate pro-apoptotic signaling. Measurement of cellular reactive oxygen species (ROS) as well as the styrene-mediated induction of oxidative stress marker proteins confirmed the hypothesis of oxidative stress as the main molecular response mechanism. Finally, adducts of cellular proteins with the reactive styrene metabolite styrene 7,8 oxide (SO) have been identified. Especially the SO-adducts observed at both the reactive centers of thioredoxin reductase 1, which is a key element in the control of the cellular redox state, may be involved in styrene-induced ROS formation and apoptosis. A similar proteomic approach has been carried out with the halobenzenes CB and 1,2-DCB (Chapter 5). In accordance with previous findings, cell toxicity assessment showed enhanced toxicity compared to the one caused by styrene. Significant changes in abundance and phosphorylation of total soluble proteins of A549 cells have been detected following exposure to subtoxic concentrations of CB and 1,2-DCB. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. As for the styrene experiment, the results indicated two main pathways to be affected in the presence of chlorinated benzenes, cell death signaling and oxidative stress response. The strong induction of pro-apoptotic signaling has been confirmed for both treatments by detection of the cleavage of caspase 3. Likewise, the induction of redox-sensitive protein species could be correlated to an increased cellular level of ROS observed following CB treatment. Finally, common mechanisms in the cellular response to aromatic VOCs have been investigated (Chapter 6). A similar number (4.6-6.9%) of all quantified protein spots showed differential expression (p<0.05) following cell exposure to styrene, CB or 1,2-DCB. However, not more than three protein spots showed significant regulation in the same direction for all three volatile compounds: voltage-dependent anion-selective channel protein 2, peroxiredoxin 1 and elongation factor 2. However, all of these proteins are important molecular targets in stress- and cell death-related signaling pathways. N2 - Die vermehrte Verwendung von Produkten, welche flüchtige organische Substanzen (VOC - volatile organic compound) enthalten, hat eine generelle Exposition der Bevölkerung mit diesen Substanzen an Arbeitsplätzen aber auch in Wohnräumen bedingt. VOCs stehen im Verdacht, zur zunehmenden Inzidenz umweltbedingter Erkrankungen beizutragen. Da die molekularen Ursachen dieser Erkrankungen bisher noch unverstanden sind, war es ein übergeordnetes Ziel dieser Arbeit, VOC-vermittelte molekulare Effekte in menschlichen Lungenepithelzellen anhand eines in vitro Modells zu untersuchen. Dabei sollten vor allem Konzentrationen unterhalb der gültigen Arbeitsplatzgrenzwerte untersucht werden. Obwohl Effekte auf einzelne Proteine bekannt sind, wurden bisher keine Effekte der VOC-Exposition auf das komplexe Netzwerk der zellulären Proteine (Proteom) untersucht. Dieses Wissen ist essentiell, um induzierte zelluläre Mechanismen zu verstehen und Strategien zu deren Vermeidung zu entwickeln. Für die hier durchgeführten Untersuchungen wurde die Lungenepithelzelllinie A549 in einem Zweiphasenexpositionsmodell eingesetzt. Dieses ermöglichte eine möglichst direkte zelluläre Exposition und wurde bereits erfolgreich verwendet, um durch VOC hervorgerufene Entzündungseffekte zu identifizieren. Die massen-spektrometrische Identifikation von 266 Proteinflecken lieferte die erste umfassende Proteomkarte der A549 Zelllinie, welche nachfolgende Untersuchungen mit diesem häufig verwendeten Zelltyp erleichtern wird. Zusätzlich wurde die Verteilung der drei gängigen Luftkontaminanten Chlorbenzol (CB), Styrol and 1,2-Dichlorobenzol (1,2-DCB) zwischen den beiden Phasen (gas/flüssig) des Expositionsmodells gaschromatographisch bestimmt. Die Verteilung entsprach den verfügbaren Literaturdaten. Anschließend wurde das modifizierte Expositionsmodell erfolgreich eingesetzt, um styrol-vermittelte Effekte auf das Proteom der A549 Zellen zu charakterisieren (Kapitel 4). Zu Beginn erfolgte die Erfassung der Zelltoxizität der Substanz, um sicher zu stellen, daß der überwiegende Teil der späteren Expositionsexperimente mit subtoxischen Konzentrationen durchgeführt wird. Es konnte eine signifikant veränderte Expression und Phosphorylierung der löslichen Proteinfraktion der A549 Zellen als Reaktion auf die Styrolexposition festgestellt werden. Die regulierten Proteine wurden massenspektrometrisch identifiziert und ihre wichtigsten Funktionen wurden zugewiesen. Validierungsexperimente auf Protein- und auf Transkriptebene bestätigten die 2-DE Ergebnisse. Insgesamt konnte die zelluläre Reaktion durch die styrol-vermittelte Induktion zweier zentraler Mechanismen erklärt werden: oxidativer zellulärer Stress und beginnende Apoptose. Folgeexperimente wie die Messung der Menge der zellulären reaktiven Sauerstoffspezies (ROS) und die Induktion von redox-sensitiven Markerproteinen konnte die Hypothese eines styrol-induzierten oxidativen Milieus bestätigen. Schließlich wurden Proteinaddukte des reaktiven Styrolmetaboliten Styrol 7,8 epoxide (SO) identifiziert. Besonders die SO-Addukte, welche and den beiden aktiven Zentren der Thioredoxin Reduktase 1 gefunden wurden könnten eine wichtige Rolle bei der styrol-induzierten ROS-Bildung sowie der beginnenden Apoptose spielen. In Analogie zum Styrolexperiment wurden die Effekte der halogenierten Benzole CB und 1,2-DCB untersucht (Kapitel 5). Es konnten ebenfalls sämtliche Proteine identifiziert und die wichtigsten zellulären Funktionen zugewiesen werden. Diese Substanzen modulierten ebenfalls apoptotische Signalwege und die zelluläre Antwort auf oxidativen Streß. Der beobachtete starke pro-apoptotische Effekt konnte für beide Substanzen mit der Spaltung der Caspase 3 nachgewiesen werden. Weiterhin konnte für CB die Induktion redox-sensitiver Proteinspezies mit einem beobachteten höherem Gehalt an ROS erklärt werden. Schließlich wurden ähnliche Mechanismen der zellulären Antwort auf die Exposition mit den drei untersuchten aromatischen VOCs diskutiert (Kapitel 6). Alle getesteten VOCs verursachten eine vergleichbare differentielle Expression (p<0,05) von 4,6-6,9% aller quantifizierten Proteinspezies. Nur drei Proteinspots wurden dabei gemeinsam für alle VOCs reguliert: voltage-dependent anion-selective channel protein 2, peroxiredoxin 1 and elongation factor 2. Allerdings gehören diese drei Proteine zu wichtigen zellulären Zielstrukturen der Signalwege für Stressantwort und Zelltod. KW - VOC KW - Proteom KW - Styrol KW - chlorbenzol KW - dichlorbenzol KW - VOC KW - proteome KW - styrene KW - monochlorobenzene KW - dichlorobenzene Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49257 ER - TY - THES A1 - Müller, Melanie J. I. T1 - Bidirectional transport by molecular motors T1 - Bidirektionaler Transport durch molekulare Motoren N2 - In biological cells, the long-range intracellular traffic is powered by molecular motors which transport various cargos along microtubule filaments. The microtubules possess an intrinsic direction, having a 'plus' and a 'minus' end. Some molecular motors such as cytoplasmic dynein walk to the minus end, while others such as conventional kinesin walk to the plus end. Cells typically have an isopolar microtubule network. This is most pronounced in neuronal axons or fungal hyphae. In these long and thin tubular protrusions, the microtubules are arranged parallel to the tube axis with the minus ends pointing to the cell body and the plus ends pointing to the tip. In such a tubular compartment, transport by only one motor type leads to 'motor traffic jams'. Kinesin-driven cargos accumulate at the tip, while dynein-driven cargos accumulate near the cell body. We identify the relevant length scales and characterize the jamming behaviour in these tube geometries by using both Monte Carlo simulations and analytical calculations. A possible solution to this jamming problem is to transport cargos with a team of plus and a team of minus motors simultaneously, so that they can travel bidirectionally, as observed in cells. The presumably simplest mechanism for such bidirectional transport is provided by a 'tug-of-war' between the two motor teams which is governed by mechanical motor interactions only. We develop a stochastic tug-of-war model and study it with numerical and analytical calculations. We find a surprisingly complex cooperative motility behaviour. We compare our results to the available experimental data, which we reproduce qualitatively and quantitatively. N2 - In biologischen Zellen transportieren molekulare Motoren verschiedenste Frachtteilchen entlang von Mikrotubuli-Filamenten. Die Mikrotubuli-Filamente besitzen eine intrinsische Richtung: sie haben ein "Plus-" und ein "Minus-"Ende. Einige molekulare Motoren wie Dynein laufen zum Minus-Ende, während andere wie Kinesin zum Plus-Ende laufen. Zellen haben typischerweise ein isopolares Mikrotubuli-Netzwerk. Dies ist besonders ausgeprägt in neuronalen Axonen oder Pilz-Hyphen. In diesen langen röhrenförmigen Ausstülpungen liegen die Mikrotubuli parallel zur Achse mit dem Minus-Ende zum Zellkörper und dem Plus-Ende zur Zellspitze gerichtet. In einer solchen Röhre führt Transport durch nur einen Motor-Typ zu "Motor-Staus". Kinesin-getriebene Frachten akkumulieren an der Spitze, während Dynein-getriebene Frachten am Zellkörper akkumulieren. Wir identifizieren die relevanten Längenskalen und charakterisieren das Stauverhalten in diesen Röhrengeometrien mit Hilfe von Monte-Carlo-Simulationen und analytischen Rechnungen. Eine mögliche Lösung für das Stauproblem ist der Transport mit einem Team von Plus- und einem Team von Minus-Motoren gleichzeitig, so dass die Fracht sich in beide Richtungen bewegen kann. Dies wird in Zellen tatsächlich beobachtet. Der einfachste Mechanismus für solchen bidirektionalen Transport ist ein "Tauziehen" zwischen den beiden Motor-Teams, das nur mit mechanischer Interaktion funktioniert. Wir entwickeln ein stochastisches Tauzieh-Modell, das wir mit numerischen und analytischen Rechnungen untersuchen. Es ergibt sich ein erstaunlich komplexes Motilitätsverhalten. Wir vergleichen unsere Resultate mit den vorhandenen experimentellen Daten, die wir qualitativ und quantitativ reproduzieren. KW - molekulare Motoren KW - bidirektionaler intrazellulärer Transport KW - Tauziehen KW - stochastische Prozesse KW - kooperative Phänomene KW - molecular motors KW - bidirectional intracellular transport KW - tug-of-war KW - stochastic processes KW - cooperative phenomena Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18715 ER - TY - THES A1 - Münch, Thomas T1 - Interpretation of temperature signals from ice cores T1 - Interpretation von Temperatursignalen aus Eisbohrkernen BT - insights into the spatial and temporal variability of water isotopes in Antarctica BT - Einblicke in die räumliche und zeitliche Variabilität antarktischer Isotopendaten N2 - Earth's climate varies continuously across space and time, but humankind has witnessed only a small snapshot of its entire history, and instrumentally documented it for a mere 200 years. Our knowledge of past climate changes is therefore almost exclusively based on indirect proxy data, i.e. on indicators which are sensitive to changes in climatic variables and stored in environmental archives. Extracting the data from these archives allows retrieval of the information from earlier times. Obtaining accurate proxy information is a key means to test model predictions of the past climate, and only after such validation can the models be used to reliably forecast future changes in our warming world. The polar ice sheets of Greenland and Antarctica are one major climate archive, which record information about local air temperatures by means of the isotopic composition of the water molecules embedded in the ice. However, this temperature proxy is, as any indirect climate data, not a perfect recorder of past climatic variations. Apart from local air temperatures, a multitude of other processes affect the mean and variability of the isotopic data, which hinders their direct interpretation in terms of climate variations. This applies especially to regions with little annual accumulation of snow, such as the Antarctic Plateau. While these areas in principle allow for the extraction of isotope records reaching far back in time, a strong corruption of the temperature signal originally encoded in the isotopic data of the snow is expected. This dissertation uses observational isotope data from Antarctica, focussing especially on the East Antarctic low-accumulation area around the Kohnen Station ice-core drilling site, together with statistical and physical methods, to improve our understanding of the spatial and temporal isotope variability across different scales, and thus to enhance the applicability of the proxy for estimating past temperature variability. The presented results lead to a quantitative explanation of the local-scale (1–500 m) spatial variability in the form of a statistical noise model, and reveal the main source of the temporal variability to be the mixture of a climatic seasonal cycle in temperature and the effect of diffusional smoothing acting on temporally uncorrelated noise. These findings put significant limits on the representativity of single isotope records in terms of local air temperature, and impact the interpretation of apparent cyclicalities in the records. Furthermore, to extend the analyses to larger scales, the timescale-dependency of observed Holocene isotope variability is studied. This offers a deeper understanding of the nature of the variations, and is crucial for unravelling the embedded true temperature variability over a wide range of timescales. N2 - Das Klima der Erde verändert sich stetig sowohl im Raum als auch in der Zeit, jedoch hat die Menschheit nur einen Bruchteil dieser Entwicklung direkt verfolgen können und erst seit 200 Jahren mit instrumentellen Beobachtungen aufgezeichnet. Unser Wissen bezüglich früherer Klimaveränderungen beruht daher fast ausschließlich auf indirekten Proxydaten, also Stellvertreterdaten, welche sensitiv auf Veränderungen in bestimmten Klimavariablen reagieren und in Klimaarchiven abgespeichert werden. Essentiell ist eine hohe Genauigkeit der erhaltenen Proxydaten. Sie erlaubt, Modellvorhersagen früherer Klimazustände quantitativ zu überprüfen und damit die Modelle zu validieren. Erst dann können mit Hilfe der Modelle verlässliche Aussagen über die anthropogen bedingten zukünftigen Klimaveränderungen getroffen werden. Die polaren Eisschilde von Grönland und Antarktika sind eines der wichtigsten Klimaarchive. Über die isotopische Zusammensetzung der im Eis eingelagerten Wassermoleküle zeichnen sie Veränderungen der lokalen Lufttemperatur auf. Jedoch stellen die Daten dieses Temperaturproxys keine perfekte Aufzeichnung früherer Klimaschwankungen dar – was im Übrigen für alle Proxydaten gilt –, da neben der Temperatur eine Fülle anderer Effekte Mittelwert und Varianz der Proxyschwankungen beeinflussen und damit die direkte Interpretation der Daten in Bezug auf klimatische Veränderungen beeinträchtigen. Insbesondere trifft dies auf Gebiete mit geringen jährlichen Schneefallmengen zu, wie z.B. das Polarplateau des antarktischen Kontinents. Diese Gebiete erlauben zwar prinzipiell die Gewinnung von Proxydatensätzen, die weit in die Vergangenheit zurückreichen, allerdings erwartet man im Allgemeinen auch eine starke Beeinträchtigung des ursprünglichen, in der isotopischen Zusammensetzung des Schnees eingeprägten Temperatursignals. Unter Verwendung von Beobachtungsdaten aus der Antarktis – hauptsächlich aus dem Niedrigakkumulationsgebiet von Dronning Maud Land in Ostantarktika, in dem auch die Kohnen-Station liegt –, sowie durch Anwendung statistischer und physikalischer Methoden, trägt diese Dissertation zu einem besseren Verständnis der räumlichen und zeitlichen Variabilität der Isotopendaten über einen weiten Skalenbereich bei. Damit verbessert die vorliegende Arbeit die Anwendbarkeit dieses Temperaturproxys in Bezug auf die Rekonstruktion natürlicher Klimavariabilität. Im Speziellen wird aus den Beobachtungsdaten ein statistisches Modell abgeleitet, welches quantitativ die lokale räumliche (1–500 m-Skala) Variabilität erklärt; des Weiteren wird gezeigt, dass die zeitliche Variabilität hauptsächlich bedingt wird durch die Kombination zweier Effekte: einen klimatischen Jahreszyklus angetrieben durch den Jahresgang der Temperatur, und die Wirkung des Diffusionsprozesses auf einen zeitlich unkorrelierten Rauschterm. Diese Resultate führen zum einen zu einer wesentlich eingegrenzten Abschätzung der Repräsentativität einzelner, isotopenbasierter Proxyzeitreihen in Bezug auf lokale Temperaturveränderungen. Zum anderen beeinflussen sie erheblich die Interpretation scheinbarer Periodizitäten im Isotopensignal. Es wird darüber hinaus vermutet, dass die Gesamtstärke des Rauschens im Isotopensignal nicht nur durch die örtliche Akkumulationsrate bestimmt wird, sondern auch durch andere Parameter wie die lokale mittlere Windstärke und die räumliche und zeitliche Kohärenz der Niederschlagswichtung. Schließlich erlaubt die Erweiterung der Analyse auf größere räumliche und zeitliche Skalen die Untersuchung, inwieweit die Variabilität isotopenbasierter Proxyzeitreihen aus dem Holozän von der Zeitskala abhängt. Dadurch wird ein tieferes Verständnis der Proxyvariabilität erzielt, welches grundlegend dafür ist, die tatsächliche, in den Daten einzelner Zeitreihen verdeckt vorhandene Temperaturvariabilität, über einen weiten Zeitskalenbereich zu entschlüsseln. KW - climate physics KW - temperature variability KW - temperature proxy KW - proxy understanding KW - proxy uncertainty KW - stable isotopes KW - isotope variations KW - ice core KW - firn KW - noise KW - post-depositional KW - two-dimensional KW - Antarctica KW - Dronning Maud Land KW - Kohnen KW - Klimaphysik KW - Klimavariabilität KW - Temperaturproxy KW - Proxyverständnis KW - Proxyunsicherheit KW - stabile Isotope KW - Eisbohrkern KW - Antarktis KW - Dronning Maud Land KW - Kohnen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-414963 ER - TY - THES A1 - Nerlich, Annika T1 - Die Rolle der Phosphatidylserin Decarboxylase für die mitochondriale Phospholipid-Biosynthese in Arabidopsis thaliana T1 - Role of phosphatidylserine decarboxylase in mitochondrial phospholipid biosynthesis of Arabidopsis thaliana N2 - Die durch Phosphatidylserin Decarboxylase (PSD) katalysierte Decarboxylierung von Phosphatidylserin (PS) zu Phosphatidylethanolamin (PE) ist für Mitochondrien in Hefe und Mäusen von essentieller Bedeutung. Im Rahmen der vorliegenden Dissertation wurde erstmals die Rolle dieses PE-Syntheseweges in Pflanzen untersucht. Die drei in Arabidopsis identifizierten PSD Gene atPSD1, atPSD2, atPSD3 codieren für Enzyme, die in Membranen der Mitochondrien (atPSD1), der Tonoplasten (atPSD2) und des Endoplasmatischen Retikulums (atPSD3) lokalisiert sind. Der Beitrag der einzelnen PSDs zur PE-Synthese wurde anhand von psd Null-Mutanten untersucht. Dabei stellte sich atPSD3 als das Enzym mit der höchsten Aktivität heraus. Alternativ zum PSD-Weg wird in Arabidopsis PE auch mittels Aminoalkohol-phosphotransferase synthetisiert. Der Verlust der gesamten PSD-Aktivität, wie es in der erzeugten psd Dreifachmutante der Fall ist, wirkt sich ausschließlich auf die Lipidzusammensetzung in der Mitochondrienmembran aus. Demzufolge wird extramitochondriales PE hauptsächlich über die Aminoalkoholphosphotransferase synthetisiert. Die veränderte Lipidzusammensetzung der Mitochondrienmembran hatte jedoch keinen Einfluss auf die Anzahl, Größe und Ultrastruktur der Mitochondrien sowie auf das ADP/ATP-Verhältnis und die Respiration. Neben der Bereitstellung von Reduktionsäquivalenten beeinflusst die Funktionalität der Mitochondrien auch die Bildung von Blüten- und Staubblättern. Diese Blütenorgane waren in der psd Dreifachmutante stark verändert, und der Blütenphänotyp ähnelte der APETALA3-Mutante. Dieses homöotische Gen ist für die Ausbildung von Blüten- und Staubblättern verantwortlich. Für die Erzeugung der Mutanten psd2-1 und psd3-1 wurde ein T-DNA Vektor verwendet, der den Promotor des APETALA3 Gens enthielt, welcher in den Mutanten psd2-1, psd3-1 sowie psd2-1psd3-1 und der psd1psd2-1psd3-1 Dreifachmutante eine vergleichbare Co-Suppression des APETALA3 Gens hervorruft. Der Blütenphänotyp trat jedoch nur in der psd Dreifachmutante auf, da nur in ihr die Kombination von geringen Funktionstörungen der Mitochondrien, hervorgerufen durch veränderte Lipidzusammensetzung, mit der Co-Suppression von APETALA3 auftritt. N2 - Decarboxylation of phosphatidylserine (PS) to form phosphatidylethanolamine (PE) catalyzed by phosphatidylserine decarboxylase (PSD) is an essential reaction for mitochondria in yeast and mice. This dissertation describes the role of this biosynthesis pathway in plants for the first time. Three PSD genes were identified in Arabidopsis, atPSD1, atPSD2, atPSD3. The gene products localize to mitochondria (atPSD1), tonoplast (atPSD2) and endoplasmatic retikulum (atPSD3). Contribution to PE-synthesis of each PSD was analyzed using T-DNA insertion mutants. Thereby, atPSD3 was found to be the most active isoform. Alternatively, PE is also synthesized by the action of aminoalcohol phosphotransferase. Complete loss of PSD activity, like in the psd triple mutant, resulted in changes in lipid composition of mitochondria membranes exclusively. In conclusion the bulk of PE is synthesized by aminoalcohol phosphotransferase. Changed lipid composition of mitochondria did not result in changes of mitochondria number, structure, ADP/ATP ratio and respiration. Mitochondria functionality was formerly shown to effect formation of petals and stamens. These flower organs were drastically morphologically changed in psd triple mutants and showed strong similarities to APETALA3 mutants. APETALA3 is a homeotic gene responsible for specifying petals and stamens. Mutants psd2-1 and psd3-1 used for crossing psd double and triple mutants contained a T-DNA vector which include the promoter for APETALA3. This promoter caused co-suppression of the endogenous APETALA3 gene in all mutants isolated from the Arabidopsis Knockout Facility, whereas changed flower morphology occurred only in the triple mutant concluding a combined effect of co-suppression and a reduced functionality of mitochondria, caused by changed lipid composition. KW - Phospholipide KW - Phosphatidylserin Decarboxylase KW - Phosphatidylserin KW - Phosphatidylethanolamin KW - Mitochondrien KW - phospholipids KW - phosphatidylserine decarboxylase KW - phosphatidylserine KW - phosphatidylethanolamine KW - mitochondria Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-14522 ER - TY - THES A1 - Neuharth, Derek T1 - Evolution of divergent and strike-slip boundaries in response to surface processes T1 - Die Entwicklung divergenter und transversaler Plattengrenzen unter dem Einfluss von Erdoberflächenprozessen N2 - Plate tectonics describes the movement of rigid plates at the surface of the Earth as well as their complex deformation at three types of plate boundaries: 1) divergent boundaries such as rift zones and mid-ocean ridges, 2) strike-slip boundaries where plates grind past each other, such as the San Andreas Fault, and 3) convergent boundaries that form large mountain ranges like the Andes. The generally narrow deformation zones that bound the plates exhibit complex strain patterns that evolve through time. During this evolution, plate boundary deformation is driven by tectonic forces arising from Earth’s deep interior and from within the lithosphere, but also by surface processes, which erode topographic highs and deposit the resulting sediment into regions of low elevation. Through the combination of these factors, the surface of the Earth evolves in a highly dynamic way with several feedback mechanisms. At divergent boundaries, for example, tensional stresses thin the lithosphere, forcing uplift and subsequent erosion of rift flanks, which creates a sediment source. Meanwhile, the rift center subsides and becomes a topographic low where sediments accumulate. This mass transfer from foot- to hanging wall plays an important role during rifting, as it prolongs the activity of individual normal faults. When rifting continues, continents are eventually split apart, exhuming Earth’s mantle and creating new oceanic crust. Because of the complex interplay between deep tectonic forces that shape plate boundaries and mass redistribution at the Earth’s surface, it is vital to understand feedbacks between the two domains and how they shape our planet. In this study I aim to provide insight on two primary questions: 1) How do divergent and strike-slip plate boundaries evolve? 2) How is this evolution, on a large temporal scale and a smaller structural scale, affected by the alteration of the surface through erosion and deposition? This is done in three chapters that examine the evolution of divergent and strike-slip plate boundaries using numerical models. Chapter 2 takes a detailed look at the evolution of rift systems using two-dimensional models. Specifically, I extract faults from a range of rift models and correlate them through time to examine how fault networks evolve in space and time. By implementing a two-way coupling between the geodynamic code ASPECT and landscape evolution code FastScape, I investigate how the fault network and rift evolution are influenced by the system’s erosional efficiency, which represents many factors like lithology or climate. In Chapter 3, I examine rift evolution from a three-dimensional perspective. In this chapter I study linkage modes for offset rifts to determine when fast-rotating plate-boundary structures known as continental microplates form. Chapter 4 uses the two-way numerical coupling between tectonics and landscape evolution to investigate how a strike-slip boundary responds to large sediment loads, and whether this is sufficient to form an entirely new type of flexural strike-slip basin. N2 - Plattentektonik beschreibt die Bewegung starrer tektonischer Platten an der Erdoberfläche sowie deren komplexe Deformation an drei Arten von Plattengrenzen: 1) divergenten Grenzen wie Grabenbrüchen und mittelozeanische Rücken, 2) transversalen Grenzen, an denen Platten gegeneinander verschoben werden, wie die San-Andreas-Verwerfung, und 3) konvergenten Grenzen, die große Gebirgszüge wie die Anden bilden. Diese schmalen Deformationszonen, die Platten begrenzen, weisen meist komplexe Dehnungsmuster auf, die sich im Laufe der Zeit entwickeln. Während dieser Entwicklung wird die Verformung der Plattengrenzen durch tektonische Kräfte aus dem tiefen Erdinneren und der Lithosphäre, aber auch durch Oberflächenprozesse, welche topografische Erhebungen erodieren und die daraus resultierenden Sedimente in tiefer gelegenen Gebieten ablagern, angetrieben. Durch das Zusammenwirken und die Rückkopplung dieser Faktoren entwickelt sich die Erdoberfläche in einer extrem dynamischen Art und Weise. An divergenten Grenzen beispielsweise dünnen Zugspannungen die Lithosphäre aus, was zu einer Hebung und anschließenden Erosion der Flanken eines Grabenbruchs führt, wobei wiederum Sedimente freigesetzt werden. Währenddessen sinkt das Zentrum des Grabens ab und wird zu einer topografischen Senke, in der sich Sedimente ablagern. Diese Massenumverteilung vom Fuß zum Hang einer Verwerfung spielt eine wichtige Rolle, da er die Aktivität einzelner Verwerfungen verlängert. Durch anhaltende Divergenz werden Kontinente schließlich auseinandergerissen, wodurch der Erdmantel an die Erdoberfläche gefördert und neue ozeanische Kruste gebildet wird. Aufgrund des komplexen Zusammenspiels zwischen tektonischen Kräften aus dem tiefen Erdinneren und der Massenumverteilung an der Erdoberfläche ist es von entscheidender Bedeutung, die Rückkopplungen zwischen diesen beiden Bereichen zu verstehen. In dieser Studie möchte ich Einblicke zu zwei Hauptfragen geben: 1) Wie entwickeln sich divergierende Plattengrenzen? 2) Wie wird diese Entwicklung auf einer großen zeitlichen und einer kleinen strukturellen Skala durch die Veränderung der Oberfläche durch Erosion und Sedimentation beeinflusst? In drei Kapiteln untersuche ich die Entwicklung von divergenten und streichenden Plattengrenzen anhand numerischer Modelle. In Kapitel 2 wird die Entwicklung von Grabenbrüchen anhand zweidimensionaler Modelle im Detail erforscht. Dabei extrahiere ich Verwerfungen aus einer Reihe von Modellen und korreliere sie über die Zeit, um zu untersuchen, wie sich Verwerfungsnetzwerke räumlich und zeitlich entwickeln. Durch die bidirektionale Kopplung des Geodynamik-Codes ASPECT und des Erdoberflächen-Codes FastScape untersuche ich, wie diese Verwerfungsnetzwerk und der Grabenbruch im Allgemeinen durch die Erosionseffizienz des Systems, welche viele Faktoren wie Lithologie oder Klima abbildet, beeinflusst werden. In Kapitel 3 untersuche ich die Entwicklung eines Grabenbruchs aus einer dreidimensionalen Perspektive. In diesem Kapitel analysiere ich wie sich gegeneinander versetzte Grabenbrüche verbinden und wann sich dabei schnell rotierende kontinentale Mikroplatten bilden. In Kapitel 4 nutze ich die entwickelte bidirektionale Kopplung zwischen Geodynamik und Erdoberflächenprozessen, um zu verstehen, wie transversale Plattengrenzen auf Sedimentlasten reagieren und ob die ausreicht, um einen völlig neue Art von Sedimentbecken in dieser Umgebung zu formen. KW - geodynamics KW - numerical modelling KW - rift KW - strike-slip KW - surface processes KW - microplate KW - FastScape KW - ASPECT KW - ASPECT KW - FastScape KW - Geodynamik KW - Mikroplatte KW - numerische Modellierung KW - Rift KW - Blattverschiebung KW - Oberflächenprozesse Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549403 ER - TY - THES A1 - Nickelt-Czycykowski, Iliya Peter T1 - Aktive Regionen der Sonnenoberfläche und ihre zeitliche Variation in zweidimensionaler Spektro-Polarimetrie T1 - Active regions on the solar surface and their temporal variation in two-dimensional spectropolarimetry N2 - Die Arbeit beschreibt die Analyse von Beobachtungen zweier Sonnenflecken in zweidimensionaler Spektro-Polarimetrie. Die Daten wurden mit dem Fabry-Pérot-Interferometer der Universität Göttingen am Vakuum-Turm-Teleskop auf Teneriffa erfasst. Von der aktiven Region NOAA 9516 wurde der volle Stokes-Vektor des polarisierten Lichts in der Absorptionslinie bei 630,249 nm in Einzelaufnahmen beobachtet, und von der aktiven Region NOAA 9036 wurde bei 617,3 nm Wellenlänge eine 90-minütige Zeitserie des zirkular polarisierten Lichts aufgezeichnet. Aus den reduzierten Daten werden Ergebniswerte für Intensität, Geschwindigkeit in Beobachtungsrichtung, magnetische Feldstärke sowie verschiedene weitere Plasmaparameter abgeleitet. Mehrere Ansätze zur Inversion solarer Modellatmosphären werden angewendet und verglichen. Die teilweise erheblichen Fehlereinflüsse werden ausführlich diskutiert. Das Frequenzverhalten der Ergebnisse und Abhängigkeiten nach Ort und Zeit werden mit Hilfe der Fourier- und Wavelet-Transformation weiter analysiert. Als Resultat lässt sich die Existenz eines hochfrequenten Bandes für Geschwindigkeitsoszillationen mit einer zentralen Frequenz von 75 Sekunden (13 mHz) bestätigen. In größeren photosphärischen Höhen von etwa 500 km entstammt die Mehrheit der damit zusammenhängenden Schockwellen den dunklen Anteilen der Granulen, im Unterschied zu anderen Frequenzbereichen. Die 75-Sekunden-Oszillationen werden ebenfalls in der aktiven Region beobachtet, vor allem in der Lichtbrücke. In den identifizierten Bändern oszillatorischer Power der Geschwindigkeit sind in einer dunklen, penumbralen Struktur sowie in der Lichtbrücke ausgeprägte Strukturen erkennbar, die sich mit einer Horizontalgeschwindigkeit von 5-8 km/s in die ruhige Sonne bewegen. Diese zeigen einen deutlichen Anstieg der Power, vor allem im 5-Minuten-Band, und stehen möglicherweise in Zusammenhang mit dem Phänomen der „Evershed-clouds“. Eingeschränkt durch ein sehr geringes Signal-Rausch-Verhältnis und hohe Fehlereinflüsse werden auch Magnetfeldvariationen mit einer Periode von sechs Minuten am Übergang von Umbra zu Penumbra in der Nähe einer Lichtbrücke beobachtet. Um die beschriebenen Resultate zu erzielen, wurden bestehende Visualisierungsverfahren der Frequenzanalyse verbessert oder neu entwickelt, insbesondere für Ergebnisse der Wavelet-Transformation. N2 - The publication describes the analysis of two sunspot observations in two-dimensional spectropolarimetry. The data was obtained with the Fabry-Pérot-interferometer of Göttingen University at the German Vacuum Tower Telescope on Tenerife. Of the active region NOAA 9516 the full Stokes vector of polarised light was observed in the absorption line at 630.249 nm in single scans. A ninety minute time series of circular polarised light of the active region NOAA 9036 was observed at 617.3 nm wavelength. From the reduced data results for intensity, line-of-sight velocity, magnetic field strength as well as several other plasma parameters are inferred. Different approaches to solar atmosphere model inversion are applied and compared. The significant influence of errors is discussed in detail. The frequency behaviour of the results and spatial and temporal dependencies are further analysed by Fourier and wavelet transformation. As a result the existence of a high frequency band of velocity oscillations with a central frequency of about 75-seconds (13 mHz) can be confirmed. In greater heights of about 500 km the majority of the corresponding shock waves are derived from darker parts of the granules in contrast to the dominant five-minute-oscillations. 75-second-oscillations can also be observed in the active region, especially in the light bridge. In the identified bands of oscillatory velocity power, distinct structures become visible in a penumbral dark structure as well as in the light bridge that move into the quiet sun with a horizontal speed of 5-8 km/s. They show an increase in power, mostly 5-minute-band, and may be related to the Evershed cloud phenomenon. Under the constraint of a very low signal-to-noise ratio and high error influence, magnetic field variations of a 6-minute period are also observed in an umbral-penumbral transition area close to a light bridge. To derive these results, existing visualisation methods for frequency analysis where improved or newly developed, especially so for wavelet transform results. KW - Sonne: Oszillationen KW - Sonne: Sonnenflecken KW - Instrumente: Polarimeter KW - Instrumente: Spektrographen KW - Frequenzanalyse KW - Sun: oszillations KW - Sun: sunspots KW - instrumentation: polarimeters KW - instrumentation: spectrographs KW - frequency analysis Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-25524 ER - TY - THES A1 - Oey, Melanie T1 - Chloroplasts as bioreactors : high-yield production of active bacteriolytic protein antibiotics T1 - Chloroplasten als Bioreaktoren : hocheffiziente Produktion von aktiven, bakteriolytischen Proteinantibiotika N2 - Plants, more precisely their chloroplasts with their bacterial-like expression machinery inherited from their cyanobacterial ancestors, can potentially offer a cheap expression system for proteinaceous pharmaceuticals. This system would be easily scalable and provides appropriate safety due to chloroplasts maternal inheritance. In this work, it was shown that three phage lytic enzymes (Pal, Cpl-1 and PlyGBS) could be successfully expressed at very high levels and with high stability in tobacco chloroplasts. PlyGBS expression reached an amount of foreign protein accumulation (> 70% TSP) that has never been obtained before. Although the high expression levels of PlyGBS caused a pale green phenotype with retarded growth, presumably due to exhaustion of plastid protein synthesis capacity, development and seed production were not impaired under greenhouse conditions. Since Pal and Cpl-1 showed toxic effects when expressed in E. coli, a special plastid transformation vector (pTox) was constructed to allow DNA amplification in bacteria. The construction of the pTox transformation vector allowing a recombinase-mediated deletion of an E. coli transcription block in the chloroplast, leading to an increase of foreign protein accumulation to up to 40% of TSP for Pal and 20% of TSP for Cpl-1. High dose-dependent bactericidal efficiency was shown for all three plant-derived lytic enzymes using their pathogenic target bacteria S. pyogenes and S. pneumoniae. Confirmation of specificity was obtained for the endotoxic proteins Pal and Cpl-1 by application to E. coli cultures. These results establish tobacco chloroplasts as a new cost-efficient and convenient production platform for phage lytic enzymes and address the greatest obstacle for clinical application. The present study is the first report of lysin production in a non-bacterial system. The properties of chloroplast-produced lysins described in this work, their stability, high accumulation rate and biological activity make them highly attractive candidates for future antibiotics. N2 - Lytische Enzyme aus Bakteriophagen bieten Eigenschaften, die sie zu vielversprechenden Medikamenten im Einsatz gegen bakterielle Krankheiten machen. Obwohl sie speziell beim Einsatz gegen bakterielle Infektionen, welche durch Antibiotika resistente Erreger hervorgerufen werden, eine maßgebende Rolle spielen könnten, waren bisher die hohen Produktionskosten ein Hindernis für die medizinische Anwendung. Ein kostengünstiges und einfach zu handhabendes System, wie beispielsweise Chloroplasten in Pflanzen, würde diese lytischen Enzyme zu einer effizienten Alternative zu herkömmlichen Antibiotika machen. In dieser Arbeit wird erstmals die erfolgreiche Produktion von lytischen Enzymen in Tabak-Chloroplasten vorgestellt, welche mit einem Fremdproteingehalt von mehr als 70% des gesamtlöslichen Proteins der Pflanze eine Menge beschreibt, die bisher mit diesem Verfahren noch nicht erreicht wurde. Alle in Chloroplasten hergestellten lytischen Enzyme zeigten hohe spezifische bakteriolytische Aktivität gegen die gewählten Humanpathogene und waren innerhalb von Minuten in der Lage diese Bakterien abzutöten. Zur Herstellung von zwei lytischen Enzymen wurde in dieser Arbeit ein spezieller Shuttle-Vektor entworfen, der die Expression von toxischen Genen innerhalb von E. coli Zellen im Zuge der DNA Replikation vermeidet, jedoch die Herstellung einer ungehinderten Expression der toxischen Gene in den Chloroplasten nach Beseitigung des Selektionsmarkers erlaubte. Ein Vergleich zwischen einem herkömmlich verwendeten Transformationsvektor und dem Shuttle-Vektor mittels eines Reportergens zeigte, dass das neu entwickelte System bis zu 4 mal mehr Protein produzierte. Diese Ergebnisse zeigen das Potential von Chloroplasten als kostengünstige und leicht zu handhabende Produktionsplattform für lytische Enzyme, welche als neue Generation von Antibiotika attraktive Alternativen zu herkömmlichen Therapien bieten. KW - Phagenlysine KW - Chloroplastentransformation KW - Antibiotikaersatz KW - Antibiotikaresistenz KW - Phage lysins KW - Chloroplast transformation KW - Antibiotic alternatives KW - Antibiotic resistance Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-28950 ER - TY - THES A1 - Ott, Christian David T1 - Stellar iron core collapse in {3+1} general relativity and the gravitational wave signature of core-collapse supernovae T1 - Stellarer Eisenkernkollaps in Allgemeiner Relativitätstheorie und die Gravitationswellensignatur von Kern-Kollaps-Supernovae N2 - I perform and analyse the first ever calculations of rotating stellar iron core collapse in {3+1} general relativity that start out with presupernova models from stellar evolutionary calculations and include a microphysical finite-temperature nuclear equation of state, an approximate scheme for electron capture during collapse and neutrino pressure effects. Based on the results of these calculations, I obtain the to-date most realistic estimates for the gravitational wave signal from collapse, bounce and the early postbounce phase of core collapse supernovae. I supplement my {3+1} GR hydrodynamic simulations with 2D Newtonian neutrino radiation-hydrodynamic supernova calculations focussing on (1) the late postbounce gravitational wave emission owing to convective overturn, anisotropic neutrino emission and protoneutron star pulsations, and (2) on the gravitational wave signature of accretion-induced collapse of white dwarfs to neutron stars. N2 - Ich präsentiere die ersten Computer-Simulationen des rotierenden Kollapses stellarer Eisenkerne, die in der {3+1}-Zerlegung der Allgemeinen Relativitätstheorie durchgeführt werden und Vorsupernova-Sternmodelle aus Sternentwicklungsrechnungen, eine heiße nukleare Zustandsgleichung und ein näherungsweises Verfahren zur Beschreibung des Elektroneneinfangs enthalten und Neutrinodruck-Effekte berücksichtigen. Basierend auf den Ergebnissen dieser Rechnungen erhalte ich die zur Zeit realistischsten Vorhersagen für das Gravitationswellensignal der Kollaps, Abprall, Abkling und frühen Nach-Abprallphase einer Kern-Kollaps-Supernova. Neben den {3+1} Simulationen diskutiere ich newtonsche axisymmetrische Kern-Kollaps-Supernova-Simulationen mit Schwerpunkten auf: (1) der Gravitationswellenabstrahlung in der späten Nach-Abprallphase durch Konvektionsströmungen, anisotropische Neutrinoemission und Proto-Neutronenstern Pulsationen und (2) der Gravitationswellensignatur des Kollapses weißer Zwergsterne zu Neutronensternen, der durch Akkretion eingeleitet wird. KW - Gravitationswellen KW - Kern-Kollaps-Supernovae KW - Allgemeine Relativitätstheorie KW - Gravitational Waves KW - Core-Collapse Supernovae KW - General Relativity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12986 ER - TY - THES A1 - Pellegrino, Antonio T1 - miRNA profiling for diagnosis of chronic pain in polyneuropathy T1 - miRNA profiling zur Diagnose von chronischem Schmerz in Polyneuropathie N2 - This dissertation aimed to determine differential expressed miRNAs in the context of chronic pain in polyneuropathy. For this purpose, patients with chronic painful polyneuropathy were compared with age matched healthy patients. Taken together, all miRNA pre library preparation quality controls were successful and none of the samples was identified as an outlier or excluded for library preparation. Pre sequencing quality control showed that library preparation worked for all samples as well as that all samples were free of adapter dimers after BluePippin size selection and reached the minimum molarity for further processing. Thus, all samples were subjected to sequencing. The sequencing control parameters were in their optimal range and resulted in valid sequencing results with strong sample to sample correlation for all samples. The resulting FASTQ file of each miRNA library was analyzed and used to perform a differential expression analysis. The differentially expressed and filtered miRNAs were subjected to miRDB to perform a target prediction. Three of those four miRNAs were downregulated: hsa-miR-3135b, hsa-miR-584-5p and hsa-miR-12136, while one was upregulated: hsa-miR-550a-3p. miRNA target prediction showed that chronic pain in polyneuropathy might be the result of a combination of miRNA mediated high blood flow/pressure and neural activity dysregulations/disbalances. Thus, leading to the promising conclusion that these four miRNAs could serve as potential biomarkers for the diagnosis of chronic pain in polyneuropathy. Since TRPV1 seems to be one of the major contributors of nociception and is associated with neuropathic pain, the influence of PKA phosphorylated ARMS on the sensitivity of TRPV1 as well as the part of AKAP79 during PKA phosphorylation of ARMS was characterized. Therefore, possible PKA-sites in the sequence of ARMS were identified. This revealed five canonical PKA-sites: S882, T903, S1251/52, S1439/40 and S1526/27. The single PKA-site mutants of ARMS revealed that PKA-mediated ARMS phosphorylation seems not to influence the interaction rate of TRPV1/ARMS. While phosphorylation of ARMST903 does not increase the interaction rate with TRPV1, ARMSS1526/27 is probably not phosphorylated and leads to an increased interaction rate. The calcium flux measurements indicated that the higher the interaction rate of TRPV1/ARMS, the lower the EC50 for capsaicin of TRPV1, independent of the PKA phosphorylation status of ARMS. In addition, the western blot analysis confirmed the previously observed TRPV1/ARMS interaction. More importantly, AKAP79 seems to be involved in the TRPV1/ARMS/PKA signaling complex. To overcome the problem of ARMS-mediated TRPV1 sensitization by interaction, ARMS was silenced by shRNA. ARMS silencing resulted in a restored TRPV1 desensitization without affecting the TRPV1 expression and therefore could be used as new topical therapeutic analgesic alternative to stop ARMS mediated TRPV1 sensitization. N2 - Ziel dieser Dissertation war es, differentiell exprimierte miRNAs im Kontext von chronischen Schmerzen bei Polyneuropathie zu bestimmen. Zu diesem Zweck wurden Patienten mit chronisch schmerzhafter Polyneuropathie und altersgleiche gesunde Patienten verglichen. Insgesamt waren alle Qualitätskontrollen zur Erstellung der miRNA-Bibliothek erfolgreich und keine der Proben wurde als Ausreißer identifiziert oder ausgeschlossen. Die Qualitätskontrolle vor der Sequenzierung zeigte, dass die Bibliothekserstellung für alle Proben funktionierte, sowie dass alle Proben frei von Adapterdimeren waren und die Mindestmolalität erreichten, woraufhin alle Proben sequenziert wurden. Die Kontrollparameter für die Sequenzierung lagen im optimalen Bereich und führten bei allen Proben zu gültigen Sequenzierungsergebnissen mit einer starken Korrelation zwischen den Proben. Die resultierende FASTQ-Datei jeder miRNA-Bibliothek wurde analysiert und für eine differenzielle Expressionsanalyse verwendet. Die differenziell exprimierten und gefilterten miRNAs wurden mittels miRDB analysiert, um eine Zielvorhersage zu erhalten. Drei dieser vier miRNAs wurden herunterreguliert: hsa-miR-3135b, hsa-miR-584-5p und hsa-miR-12136, während eine hochreguliert wurde: hsa-miR-550a-3p. Die miRNA-Zielvorhersage zeigte, dass chronische Schmerzen bei Polyneuropathie das Ergebnis von miRNA induziertem hohen Blutdruck und neuralen Aktivitätsdysregulationen sein könnten. Daraus ergibt sich die Schlussfolgerung, dass diese vier miRNAs als potenzielle Biomarker für die Diagnose von chronischen Schmerzen bei Polyneuropathie dienen könnten. Da TRPV1 mit Nozizeption und neuropathischen Schmerzen in Verbindung gebracht wird, wurde der Einfluss von PKA-phosphoryliertem ARMS auf die Sensitivität von TRPV1 sowie die Rolle von AKAP79 während der PKA-Phosphorylierung von ARMS untersucht. Dazu wurden mögliche PKA-Stellen in der Sequenz von ARMS identifiziert. Dies ergab fünf kanonische PKA-Stellen: S882, T903, S1251/52, S1439/40 und S1526/27. Die einzelnen ARMS-Mutanten zeigten, dass die PKA-vermittelte ARMS-Phosphorylierung die Interaktion von TRPV1/ARMS nicht zu beeinflussen scheint. Während die Phosphorylierung von ARMST903 die Interaktionsrate mit TRPV1 nicht erhöht, wird ARMSS1526/27 vermutlich nicht phosphoryliert und führt zu einer erhöhten Interaktionsrate. Zusätzlich zeigten Kalziumflussmessungen, dass der EC50 für Capsaicin von TRPV1 umso niedriger ist, je höher die Interaktionsrate von TRPV1/ARMS ist, unabhängig vom PKA-Phosphorylierungsstatus von ARMS. Darüber hinaus bestätigte die Western-Blot-Analyse, dass AKAP79 an dem TRPV1/ARMS/PKA-Signalkomplex beteiligt zu sein scheint. Letztlich sorgte die Stilllegung von ARMS mittels shRNA zu einer wiederhergestellten TRPV1-Desensibilisierung, ohne die TRPV1-Expression zu beeinträchtigen, und könnte als neue topische therapeutische Analgetika-Alternative verwendet werden. KW - miRNA KW - miRNA KW - chronic pain KW - chronischer Schmerz KW - polyneuropathy KW - Polyneuropathie KW - TRPV1 KW - TRPV1 KW - ARMS KW - ARMS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-583858 ER - TY - THES A1 - Pons, Michaël T1 - The Nature of the tectonic shortening in Central Andes T1 - Die Beschaffenheit der tektonischen Verkürzung in den Zentralanden N2 - The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that “bulldozes” the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as “flat-slab conveyor”. Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively. N2 - Die Andenkordillere ist ein Gebirgszug am westlichen Rand Südamerikas und Teil des östlichen zirkumpazifischen Gebirgsgürtels. Der ~7000 km lange Gebirgszug ist einer der längsten der Erde und beherbergt mit dem Altiplano-Puna-Plateau das zweitgrößte orogenetische Plateau der Welt. Die Anden sind als nicht-kollisionsbedingtes Subduktionsgebirge bekannt, das durch die Wechselwirkung zwischen der subduzierten ozeanischen Nazca-Platte und der südamerikanischen Kontinentalplatte entstanden ist. Entlang des Höhenzugs der Anden lassen sich Segmente unterschiedlicher morphotektonischer Provinzen ausmachen, die durch Variationen in topographischer Höhe, vulkanischer Aktivität, Deformationsform, Krustendicke, Krustenverkürzung und ozeanischer Plattengeometrie gekennzeichnet sind. Der größte Teil der heutigen Hebung lässt sich durch die Krustenverkürzung der letzten 50 Mio. Jahre erklären, wobei das Ausmaß der Verkürzung von ca. 300 km im zentralen Segment (15°S-30°S) auf weniger als die Hälfte im südlichen Teil (30°S-40°S) abnimmt. Es wurden mehrere Faktoren vorgeschlagen, die das Ausmaß und die Beschleunigung der Verkürzung der zentralen Anden in den letzten 15 Mio. Jahren beeinflusst haben könnten. Ein wichtiger Faktor ist wahrscheinlich die Plattengeometrie. Durch die Subduktion des Juan-Fernandez-Rückens und dessen hohe Auftriebskraft fällt die Platte bei 27-33°S in ~100 km Tiefe horizontal ein und bildet den pampeanischen flat-slab. Es wird angenommen, dass die horizontale Subduktion den thermomechanischen Zustand des Sierras-Pampeanas-Vorlandes beeinflusst, indem sie beispielsweise die Lithosphäre stärkt und die dickschalige Verlagerung der Deformation nach Osten sowie die Hebung der kristallinen Basis der Sierras-Pampeanas fördert. Vor etwa 30 Mio. Jahren verschob sich der flat-slab von der geographischen Breite des Altiplano zu seiner heutigen Position nach Süden. Die mit der Positionsverlagerung verbundenen Prozesse und Folgen für die gleichzeitige Beschleunigung der Verkürzungsraten in den zentralen Anden sind noch immer unklar. Obwohl die Passage des flat-slab eine Erklärung für dafür sein könnte, erklärt ihr Zeitpunkt nicht die beiden aus der Geologie abgeleiteten Verkürzungsimpulse vor etwa 15 und 4 Mio. Jahren. Ich stelle die Hypothese auf, dass die Deformation in den zentralen Anden durch eine komplexe Wechselwirkung zwischen der Subduktionsdynamik der Nazca-Platte und der dynamischen Materialschwächung der südamerikanischen Platte aufgrund einer Reihe von Prozessen in der oberen Platte gesteuert wird. Um diese Hypothese zu prüfen, ist eine detaillierte Untersuchung der Rolle des flat-slab, sowie der strukturellen Vererbung der Kontinentalplatte und der Subduktionsdynamik in den Anden erforderlich. Daher habe ich zwei Klassen von numerischen thermomechanischen Modellen erstellt: (i) Die erste Klasse von Modellen umfasst eine Reihe von generischen E-W-orientierten 2D-Subduktionsmodellen mit hoher Auflösung. Diese beinhalten subhorizontalen Subduktion um die Rolle der Subduktionsdynamik auf die zeitliche Variabilität der Verkürzungsrate in den zentralen Anden auf dem Altiplano (~21°S) zu untersuchen. Die modellierte Verkürzungsrate wurde mit der beobachteten tektonischen Verkürzungsrate in den zentralen Anden validiert. (ii) Die zweite Klasse von Modellen besteht aus einer Reihe von datengesteuerten 3D-Modellen der heutigen pampeanischen flat-slab-Konfiguration und der Sierras Pampeanas (26-42°S). Diese Modelle zielen darauf ab, den relativen Beitrag der heutigen subhorizontalen Subduktion und der ererbten Strukturen in der kontinentalen Lithosphäre zur Dehnungslokalisierung zu untersuchen. Beide Modellklassen wurden mit Hilfe des fortschrittlichen geodynamischen Finite-Elemente-Codes ASPECT erstellt. Das erste Hauptergebnis dieser Arbeit ist die Vermutung, dass zeitliche Änderungen der Verkürzung in den Zentralanden in erster Linie durch die Subduktionsdynamik der Nazca-Platte gesteuert werden, während diese in die Mantelübergangszone eindringt. Die Dynamik hängt von der westwärts gerichteten Geschwindigkeit der südamerikanischen Platte ab, die die Hauptantriebskraft für die Krustenverkürzung in den Anden darstellt und den Subduktionsgraben zum Zurückziehen zwingt. Wenn die subduzierende Platte den unteren Erdmantel erreicht, wölbt sie sich auf, bis der erzwungene Rückzug des Grabens dazu führt, dass auch die Platte im oberen Erdmantel steiler wird. Die aufgesteilte Platte behindert wiederum den Graben, der sich der vorrückenden südamerikanischen Platte widersetzt, was eine pulsierende Verkürzung zur Folge hat. Dieses Subduktionsregime, bestehend aus Aufwölbung und Aufsteilung, könnte durch die allgemeine westwärts gerichtete Geschwindigkeitsabnahme der südamerikanischen Platte ausgelöst worden sein. Der Durchgang des flat-slab ist zudem eine notwendige Bedingung, um die Verkürzung der Kontinentalplatte voran zu treiben, da subhorizontale Subduktion Teile der Mantellithosphäre abträgt und so die Kontinentalplatte schwächt. Dieser Prozess trägt somit zur effizienten Verkürzung bei während der Graben behindert wird und ist gefolgt von der Ablösung der Mantellithosphäre vor etwa 20 Mio. Jahren. Das Subduzieren des brasilianischen kratonischen Schildes unter das Orogen erfolgte schließlich vor etwa 11 Mio. Jahren aufgrund der mechanischen Schwächung der dicken Sedimentschicht, die den Schildrand bedeckte, sowie wegen des abnehmenden Widerstands der geschwächten Gebirgslithosphäre. Das zweite Hauptergebnis dieser Arbeit ist die Vermutung, dass der kalte flat-slab die darüber liegende kontinentale Lithosphäre stärkt und damit verhindert, dass sich Verformungen lokalisieren können. Daher wird die Deformation durch die an der Subduktionsfläche wirkende Scherspannung auf die östliche Front des flat-slab-Segments übertragen. Der flat-slab wirkt wie ein Eindringling, der die unter mantle-keel bekannte Anhäufung von abgelöstem Mantelmaterial beiseite schiebt. Der Versatz in der ostwärts gerichteten Deformationsausbreitung der flachen und der steileren Plattensegmenten im Süden führt zur Bildung einer transpressiven dextralen Scherungszone. Hier werden ererbte Verwerfungen vergangener tektonischer Ereignisse reaktiviert und helfen bei der Lokalisierung neuer Deformation in einer en-echelon-artigen Scherungszone. Dies geschieht durch einen Mechanismus, den ich als "flat-slab-Conveyor" bezeichne. Das laterale Zusammenschieben wird besonders durch das Flacherwerden des flat-slab beeinflusst, welches den Zeitpunkt mehrerer geologischer Ereignisse erklärt, die der Ankunft des flat-slab bei 33°S vorangehen. Dazu gehören der Beginn der Kompression und der Übergang von dünn- zu dickschaliger Deformation, die sich aus der Krustenkontraktion in den Sierras Pampeanas etwa 10 bzw. 6 Mio. Jahre vor der Kollision mit dem Juan-Fernandez-Rücken auf diesem Breitengrad ergaben. KW - Andes KW - Orogen KW - tectonics KW - Subduction KW - Deformation KW - Shortening KW - Flat subduction KW - Geodynamics KW - Altiplano KW - Puna KW - Sierras Pampeanas KW - Foreland KW - Altiplano KW - Anden KW - Deformation KW - Flache Subduktion KW - Vorland KW - Geodynamik KW - Orogen KW - Puna KW - Verkürzung KW - Sierras Pampeanas KW - Subduktion KW - Tektonik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-600892 ER - TY - THES A1 - Popovic, Jelena T1 - Novel lithium iron phosphate materials for lithium-ion batteries T1 - Neuartige Lithium-Eisen-Phosphat-Materialien für Lithium-Ionen-Batterien N2 - Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94% of the theoretically known capacity. N2 - Konventionelle Energiequellen sind weder nachwachsend und daher nachhaltig nutzbar, noch weiterhin langfristig verfügbar. Sie benötigen Millionen von Jahren um gebildet zu werden und verursachen in ihrer Nutzung negative Umwelteinflüsse wie starke Treibhausgasemissionen. Im 21sten Jahrhundert ist es unser Ziel nachhaltige und umweltfreundliche, sowie möglichst preisgünstige Energiequellen zu erschließen und nutzen. Neuartige Technologien assoziiert mit transportablen Energiespeichersystemen spielen dabei in unserer mobilen Welt eine große Rolle. Li-Ionen Batterien sind in der Lage wiederholt Energie aus entsprechenden Prozessen nutzbar zu machen, indem sie reversibel chemische in elektrische Energie umwandeln. Die Leistung von Li-Ionen Batterien hängen sehr stark von den verwendeten Funktionsmaterialien ab. Aktuell verwendete Elektrodenmaterialien haben hohe Produktionskosten, verfügen über limitierte Energiespeichekapazitäten und sind teilweise gefährlich in der Nutzung für größere Bauteile. Dies beschränkt die Anwendungsmöglichkeiten der Technologie insbesondere im Gebiet der hybriden Fahrzeugantriebe. Die vorliegende Dissertation beschreibt bedeutende Fortschritte in der Entwicklung von LiFePO4 als Kathodenmaterial für Li-Ionen Batterien. Mithilfe einfacher Syntheseprozeduren konnten eine vollkommen neue Morphologie (mesokristallines LiFePo4) sowie ein nanostrukturiertes Material mit exzellenten elektrochemischen Eigenschaften hergestellt werden. Die neu entwickelten Verfahren zur Synthese von LiFePo4 sind einschrittig und bei signifikant niedrigeren Temperaturen im Vergleich zu konventionellen Methoden. Die Verwendung von preisgünstigen und umweltfreundlichen Ausgangsstoffen stellt einen grünen Herstellungsweg für die large scale Synthese dar. Mittels des neuen Synthesekonzepts konnte meso- und nanostrukturiertes LiFe PO4 generiert werden. Die Methode ist allerdings auch auf andere phospho-olivin Materialien (LiCoPO4, LiMnPO4) anwendbar. Batterietests der besten Materialien (nanostrukturiertes LiFePO4 mit Kohlenstoffnanobeschichtung) ergeben eine mögliche Energiespeicherung von 94%. KW - Li-Ionen-Akkus KW - Kathode KW - LiFePO4 KW - Mesokristalle KW - Nanopartikel KW - Li-ion batteries KW - cathode KW - LiFePO4 KW - mesocrystals KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54591 ER - TY - THES A1 - Prevot, Michelle Elizabeth T1 - Introduction of a thermo-sensitive non-polar species into polyelectrolyte multilayer capsules for drug delivery T1 - Einbettung unpolarer, temperaturempfindlicher Substanzen in Polyelektrolytkapselsysteme zur Wirkstofffreisetzung N2 - The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest. N2 - Verkapselung ist ein vielseitiges Werkzeug, das zum Schutz und zum Transport von Molekülen ebenso eingesetzt werden kann, wie zur Verbindung von Reaktionspartnern in einem gemeinsamen, von der Umgebung abgeschirmten Raum. Es basiert auf einem einfachen Vorbild der Natur. Pflanzen schützen ihren Samen zum Beispiel durch eine harte, nahezu undurchdringbare Schale (Nüsse) oder durch eine selektiv durchlässige Hülle, wie bei Weizen, der sobald er feucht wird zu keimen beginnt. Die Natur setzt durch den Einsatz des Hülle-Kern Prinzips sehr effizient die Kontrolle über Durchlässigkeit und Anpassung an bestimmte Aufgaben um. Wird das Hülle-Kern-Prinzip zum Schutz oder Transport von Molekülen eingesetzt, so sind die zu verwendenden Kapseln nur wenige Mikrometer groß. Sie werden dann als Mikrokapseln bezeichnet. Zur Erzeugung dieser Mikrokapseln werden verschiedene Methoden verwendet. Der heute übliche Weg geht von einer ca. 5-10 Mikrometer großen Kugel (Kern) aus, die mit einer stabilen und an die gewünschten Eigenschaften angepassten Schicht von wenigen Nanometern versehen wird. Im Anschluss wird der Kern herausgelöst und eine hohle, stabile Kapsel erhalten. Schichten von wenigen Nanometern Dicke können aus Polyelektrolyten durch das Layer-by-Layer-Verfahren (LbL) hergestellt werden. Dieses Verfahren eignet sich auf Grund seiner vielen Anpassungsmöglichkeiten besonders zum Aufbau der Schichten für Mikrokapseln, da sich die Eigenschaften der Beschichtung bereits beim Aufbau der Schicht auf die Bedürfnisse maßschneidern lassen. Diese Arbeit befasst sich mit der Erzeugung von Mikrokapseln, deren Eigenschaften temperaturabhängig sind. Dies wurde auf zwei Wegen erreicht. Zum einen wurden Kapseln aus Polyelektrolyten und Wachs aufgebaut. Bei Temperaturerhöhung schmilzt das Wachs und versiegelt die Kapsel. Zum anderen werden Kapseln mit einem Wärme empfindlichen Polymer gefüllt. Bei Temperaturerhöhung kollabiert das Polymergerüst. Der enthaltene Wirkstoff wird freigesetzt. KW - Mikrokapsel KW - Polyelektrolyt KW - Mehrschichtsysteme KW - Polyelectrolyte KW - Multilayers KW - Capsule Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7785 ER - TY - THES A1 - Radeff, Giuditta T1 - Geohistory of the Central Anatolian Plateau southern margin (southern Turkey) T1 - Die geologische Entwicklung des südlichen zentralsanatolischen Plateaurandes (Süd-Türkei) N2 - The Adana Basin of southern Turkey, situated at the SE margin of the Central Anatolian Plateau is ideally located to record Neogene topographic and tectonic changes in the easternmost Mediterranean realm. Using industry seismic reflection data we correlate 34 seismic profiles with corresponding exposed units in the Adana Basin. The time-depth conversion of the interpreted seismic profiles allows us to reconstruct the subsidence curve of the Adana Basin and to outline the occurrence of a major increase in both subsidence and sedimentation rates at 5.45 – 5.33 Ma, leading to the deposition of almost 1500 km3 of conglomerates and marls. Our provenance analysis of the conglomerates reveals that most of the sediment is derived from and north of the SE margin of the Central Anatolian Plateau. A comparison of these results with the composition of recent conglomerates and the present drainage basins indicates major changes between late Messinian and present-day source areas. We suggest that these changes in source areas result of uplift and ensuing erosion of the SE margin of the plateau. This hypothesis is supported by the comparison of the Adana Basin subsidence curve with the subsidence curve of the Mut Basin, a mainly Neogene basin located on top of the Central Anatolian Plateau southern margin, showing that the Adana Basin subsidence event is coeval with an uplift episode of the plateau southern margin. The collection of several fault measurements in the Adana region show different deformation styles for the NW and SE margins of the Adana Basin. The weakly seismic NW portion of the basin is characterized by extensional and transtensional structures cutting Neogene deposits, likely accomodating the differential uplift occurring between the basin and the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Central Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break-off. N2 - Il Bacino di Adana (Turchia meridionale) é situato in posizione esterna rispetto al margine sud-orientale del plateau anatolico centrale. Il bacino risulta ubicato in posizione strategica per registrare i principali cambiamenti della topografia e dell’assetto tettonico avvenuti durante il Neogene nel Mediterraneo orientale. Utilizzando dati sismici provenienti dall’industria petrolifera abbiamo correlato 34 profili sismici con le unitá corrispondenti affioranti nel Bacino di Adana. La conversione da tempi a profonditá dei profili sismici interpretati ci ha permesso di ricostruire la curva di subsidenza del Bacino di Adana e di individuare un evento caratterizato da un importante aumento della subsidenza associato ad un considerevole incremento del tasso di sedimentazione. Questo evento, avvenuto tra 5.45 e 5.33 Ma ha portato alla deposizione di quasi 1500 km3 di conglomerati e marne. La nostra analisi di provenienza della porzione conglomeratica mostra che la maggior parte del sedimento proviene dal margine sud-orientale del plateau anatolico centrale e dalle aree situate a nord di questo. La comparazione di questi risultati con la composizione litologica di conglomerati recenti e con le litologie affioranti nei bacini di drenaggio attuali mostra cambiamenti rilevanti tra le aree di provenienza del sedimento Messiniane e quelle attuali. Riteniamo che questi cambiamenti nelle aree sorgente siano il risultato del sollevamento e della successiva erosione del margine sud-orientale del plateau anatolico centrale. Questa ipotesi é supportata dal confronto delle curve di subsidenza del Bacino di Adana e del Bacino di Mut, un bacino principalmente neogenico situato sulla sommitá del margine meridionale del plateau. La comparazione delle due curve di subsidenza mostra che l’evento di forte subsidenza del Bacino di Adana é coevo ad un episodio di sollevamento del margine meridionale del plateau anatolico centrale. La raccolta di un fitto dataset strutturale acquisito nella regione di Adana mostra differenti stili deformativi per i margini nord-occidentale e sud-orientale del bacino. La porzione nord-occidentale del bacino, debolmente sismica, é caratterizzata da strutture estensionali e transtensive che tagliano I depositi neogenici, verosimilmente accomodando il sollevamento differenziale tra il bacino e il margine sud-orientale del plateau. Riteniamo che l’evoluzione tettonica del margine meridionale del plateau anatolico centrale e la contemporanea subsidenza e sedimentazione nel Bacino di Adana sia da ricondurre a processi litosferici profondi, in particolar modo delaminazione litosferica e slab break-off. KW - Hebung des Plateaus KW - Sedimentenabfolge KW - Subsidenzgeschichte KW - Adana Becken KW - Süd-Türkei KW - plateau uplift KW - sedimentary record KW - subsidence history KW - Adana Basin KW - southern Turkey Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71865 ER - TY - THES A1 - Radloff, Katrin T1 - The role of the fatty acid profile and its modulation by cytokines in the systemic inflammation in cancer cachexia T1 - O papel e a modulação do perfil de ácidos graxos por citocinas na inflamação da caquexia associada ao câncer T1 - Die Rolle des Fettsäure-Profils und dessen entzündungsbedingten Veränderungen in der Tumorkachexie N2 - Systemic inflammation is a hallmark of cancer cachexia. Among tumor-host interactions, the white adipose tissue (WAT) is an important contributor to inflammation as it suffers morphological reorganization and lipolysis, releasing free fatty acids (FA), bioactive lipid mediators (LM) and pro-inflammatory cytokines, which accentuate the activation of pro-inflammatory signaling pathways and the recruitment of immune cells to the tissue. This project aimed to investigate which inflammatory factors are involved in the local adipose tissue inflammation and what is the influence of such factors upon enzymes involved in FA or LM metabolism in healthy individuals (Control), weight stable gastro-intestinal cancer patients (WSC) and cachectic cancer patients (CC). The results demonstrated that the inflammatory signature of systemic inflammation is different from local adipose tissue inflammation. The systemic inflammation of the cachectic cancer patients was characterized by higher levels of circulating saturated fatty acids (SFA), tumor-necrosis-factor-α (TNF-α), interleukins IL-6, IL-8 and CRP while levels of polyunsaturated fatty acids (PUFAs), especially n3-PUFAs, were lower in CC than in the other groups. In vitro and in adipose tissue explants, pro-inflammatory cytokines and SFAs were shown to increase the chemokines IL-8 and CXCL10 that were found to be augmented in adipose tissue inflammation in CC which was more profound in the visceral adipose tissue (VAT) than in subcutaneous adipose tissue (SAT). Systemic inflammation was negatively associated with the expression of PUFA synthesizing enzymes, though gene and protein expression did hardly differ between groups. The effects of inflammatory factors on enzymes in the whole tissue could have been masked by differentiated modulation of the diverse cell types in the same tissue. In vitro experiments showed that the expression of FA-modifying enzymes such as desaturases and elongases in adipocytes and macrophages was regulated into opposing directions by TNF-α, IL-6, LPS or palmitate. The higher plasma concentration of the pro-resolving LM resolvin D1 in CC cannot compensate the overall inflammatory status and the results indicate that inflammatory cytokines interfere with synthesis pathways of pro-resolving LM. In summary, the data revealed a complex inter-tissue and inter-cellular crosstalk mediated by pro-inflammatory cytokines and lipid compounds enhancing inflammation in cancer cachexia by feed-forward mechanisms. N2 - Systemische Entzündung ist ein grundlegendes Merkmal der Tumorkachexie. Bei den entzündungstreibenden Wechselwirkungen zwischen Tumor und Wirt spielt das weiße Fettgewebe eine besondere Rolle, da es, bedingt durch morphologische Veränderungen und Lipolyse, freie Fettsäuren, bioaktive Lipidmediatoren (LM) und pro-inflammatorische Cytokine freisetzt. Diese verschiedenen Substanzen verstärken die Aktivierung entzündungsfördernder Signalwege und eine Rekrutierung von Immunzellen in das Gewebe. Das Ziel dieser Arbeit war es daher zu untersuchen, welche Faktoren an der Entwicklung der lokalen Fettgewebsentzündung beteiligt sind und wie diese Faktoren Syntheseenzyme von Fettsäuren und Lipidmediatoren beeinflussen könnten. Dazu wurden Plasma und Fettgewebeproben von gesunden Kontrollpersonen (Control) und normalgewichtigen (WSC) sowie kachektischen Magen-Darm-Krebs-Patienten (CC) untersucht. Die Ergebnisse zeigten, dass sich die inflammatorischen Charakteristiken der systemischen Entzündung von denen der lokalen Fettgewebsentzündung unterscheiden. Die systemische Entzündung war gekennzeichnet durch höhere Spiegel gesättigter Fettsäuren (SFA), Tumor-necrosis-factor alpha (TNF-α), Interleukin IL-6, IL-8 und C-reactive protein (CRP) während die Konzentrationen von mehrfachungesättigten Fettsäuren (PUFA) –besonders n3-Fettsäuren- geringer in CC waren als in den anderen Gruppen. In vitro und in ex vivo kultivierten Fettgewebssegmenten konnte gezeigt werden, dass die Inkubation mit pro-inflammatorischen Cytokinen und gesättigten Fettsäuren zu einem Anstieg der Chemokine IL-8 sowie CXCL10 führte. Erhöhte Spiegel dieser Moleküle wurden auch in der Fettgewebsentzündung bei kachektischen Patienten beobachtet, welche im viszeralen Fettgewebe ausgeprägter war als im subkutanen. Systemische Entzündungsmarker waren negativ mit der Expression PUFA-synthetisierender Enzyme assoziiert, obwohl sich Gesamt-mRNA-sowie Proteingehalt kaum zwischen den Studiengruppen unterschieden. Die Effekte von Entzündungsfaktoren auf diese Enzyme im Gesamtgewebe könnten durch eine differenzielle Modulierung in diversen Zelltypen des Gewebes maskiert sein. Denn in in vitro-Experimenten zeigte die Inkubation mit TNF-α, IL-6, LPS oder Palmitat, dass die GeneExpression von Fettsäure-modifizierenden Enzymen wie Desaturasen oder Elongasen in Adipozyten und Makrophagen in entgegengesetzte Richtungen reguliert wird. Die höhere Plasmakonzentration des entzündungslösenden LM Resolvin D1 in CC konnte dem inflammatorischen Zustand nicht entgegenwirken und die Ergebnisse deuten darauf hin, dass inflammatorische Cytokine in die Synthesewege von entzündungslösenden LM eingreifen. Zusammenfassend demonstrieren die Daten das komplexe Zusammenspiel zwischen verschiedenen Geweben und Zelltypen, in dem Cytokine und Lipidverbindungen aus dem Blutkreislauf die Entzündung der Tumorkachexie durch selbst-verstärkende Mechanismen vorantreiben. N2 - A inflamação sistêmica é uma das características que marcam o diagnóstico da caquexia associada ao câncer. Entre as interações tumor-hospedeiro, o tecido adiposo branco contribui à inflamação, uma vez que ele sofre uma reorganização morfológica e lipólise, liberando ácidos graxos livres (AGLs), mediadores lipídicos (LMs) e citocinas pró-inflamatórias, que acentuam a ativação de vias de sinalização pró-inflamatória e o recrutamento de células do sistema imunológico para o tecido. O objetivo deste projeto foi investigar quais fatores inflamatórios sistêmicos estão envolvidos na inflamação do tecido adiposo e qual é a influência desses fatores sobre as enzimas envolvidas no metabolismo dos AGs ou LMs em indivíduos saudáveis (Controle), pacientes com câncer gastrointestinal com peso estável (WSC) e pacientes com câncer e caquexia (CC). Os resultados demonstraram que a resposta inflamatória sistêmica é diferente da resposta encontrada no tecido adiposo. A inflamação sistêmica dos pacientes com câncer e caquexia (CC) foi caracterizada por níveis circulantes mais elevados de ácidos graxos saturados (SFAs), tumor-necrosis-factor-α (TNF-α), Interleukin IL-6, IL-8 e proteina C-reativa (PCR), enquanto os níveis de ácidos graxos poliinsaturados (PUFAs), especialmente n3-PUFAs, foram menores em CC que nos demais grupos. In vitro e em explantes de tecido adiposo, citocinas pró-inflamatórias e SFAs aumentaram a expressão das quimiocinas IL-8 e CXCL10. E tambêm observamos um aumento na expressão destas quimiocinas na inflamação do tecido adiposo no CC, que era mais profundo no tecido adiposo visceral (VAT) quando comparado ao tecido adiposo subcutâneo (SAT). A inflamação sistêmica foi negativamente associada com a expressão de enzimas sintetizadoras dos PUFAs, embora a expressão gênica e protéica mostraram somente pequenas diferencias entre os grupos. Os efeitos dos fatores inflamatórios sobre as enzimas no tecido adiposo podem ter sido mascarados pela modulação diferenciada dos diversos tipos celulares constituintes desse tecido. Experimentos in vitro mostraram que a expressão de enzimas que modificam os AGs, tais como as dessaturases e elongases em adipócitos e macrófagos, foram reguladas em direções opostas por TNF-α, IL-6, LPS e palmitato. Mesmo os pacientes CC demonstrando uma maior concentração plasmática da Resolvina D1, que é um mediador lipídico de resolução da inflamação, ainda assim, a inflamação sistêmica é maior nesses pacientes, e os resultados indicam que as citoquinas inflamatórias interferem com as vias de síntese das LMs da resolução. Concluímos que, os dados revelaram um crosstalk inter-tecidual e intercelular complexo mediado por citocinas pró-inflamatórias e compostos lipídicos que aumentam a inflamação na caquexia associada ao câncer por mecanismos autoregulação. KW - cancer cachexia KW - inflammation KW - adipose tissue KW - cytokines KW - chemokines KW - SFA KW - PUFA Y1 - 2018 ER - TY - THES A1 - Regel, Stefanie T1 - The comprehension of figurative language : electrophysiological evidence on the processing of irony T1 - Zum Verstehen figurativer Sprache : elektrophysiologische Studien zur Verarbeitung von Ironie N2 - Diese Dissertation untersucht das Verstehen figurativer Sprache, im Besonderen die zeitliche Verarbeitung von verbaler Ironie. In sechs Experimenten wurde mittels ereignis-korrelierter Potentiale (EKP) die Gehirnaktivität beim Verstehen ironischer Äußerungen im Vergleich zu entsprechenden nicht-ironischen Äußerungen gemessen und analysiert. Darüberhinaus wurde der Einfluss verschiedener sprachbegleitender Hinweisreize, z.B. von Prosodie oder der Verwendung von Satzzeichen, sowie außersprachlicher Hinweisreize, wie bspw. pragmatischen Wissens, auf das Ironieverstehen untersucht. Auf Grundlage dieser Ergebnisse werden verschiedene psycholinguistische Modelle figurativer Sprachverarbeitung, d.h. 'standard pragmatic model', 'graded salience hypothesis', sowie 'direct access view', diskutiert. N2 - This dissertation investigates the comprehension of figurative language, in particular the temporal processing of verbal irony. In six experiments using event-related potentials(ERP) brain activity during the comprehension of ironic utterances in relation to equivalent non-ironic utterances was measured and analyzed. Moreover, the impact of various language-accompanying cues, e.g., prosody or the use of punctuation marks, as well as non-verbal cues such as pragmatic knowledge has been examined with respect to the processing of irony. On the basis of these findings different models on figurative language comprehension, i.e., the 'standard pragmatic model', the 'graded salience hypothesis', and the 'direct access view', are discussed. KW - Figurative Sprachverarbeitung KW - verbale Ironie KW - Pragmatik KW - Diskursverstehen KW - EKP KW - Figurative language processing KW - verbal irony KW - pragmatics KW - discourse comprehension KW - ERP Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33376 ER - TY - THES A1 - Richter, Maximilian Jacob Enzo Amandus T1 - Continental rift dynamics across the scales T1 - Dynamiken kontinentaler Grabenbrüche über die Skalen BT - numerical modelling of localisation processes BT - numerische Modellierung von Lokalisations-Prozessen N2 - Localisation of deformation is a ubiquitous feature in continental rift dynamics and observed across drastically different time and length scales. This thesis comprises one experimental and two numerical modelling studies investigating strain localisation in (1) a ductile shear zone induced by a material heterogeneity and (2) in an active continental rift setting. The studies are related by the fact that the weakening mechanisms on the crystallographic and grain size scale enable bulk rock weakening, which fundamentally enables the formation of shear zones, continental rifts and hence plate tectonics. Aiming to investigate the controlling mechanisms on initiation and evolution of a shear zone, the torsion experiments of the experimental study were conducted in a Patterson type apparatus with strong Carrara marble cylinders with a weak, planar Solnhofen limestone inclusion. Using state-of-the-art numerical modelling software, the torsion experiments were simulated to answer questions regarding localisation procedure like stress distribution or the impact of rheological weakening. 2D numerical models were also employed to integrate geophysical and geological data to explain characteristic tectonic evolution of the Southern and Central Kenya Rift. Key elements of the numerical tools are a randomized initial strain distribution and the usage of strain softening. During the torsion experiments, deformation begins to localise at the limestone inclusion tips in a process zone, which propagates into the marble matrix with increasing deformation until a ductile shear zone is established. Minor indicators for coexisting brittle deformation are found close to the inclusion tip and presumed to slightly facilitate strain localisation besides the dominant ductile deformation processes. The 2D numerical model of the torsion experiment successfully predicts local stress concentration and strain rate amplification ahead of the inclusion in first order agreement with the experimental results. A simple linear parametrization of strain weaking enables high accuracy reproduction of phenomenological aspects of the observed weakening. The torsion experiments suggest that loading conditions do not affect strain localisation during high temperature deformation of multiphase material with high viscosity contrasts. A numerical simulation can provide a way of analysing the process zone evolution virtually and extend the examinable frame. Furthermore, the nested structure and anastomosing shape of an ultramylonite band was mimicked with an additional second softening step. Rheological weakening is necessary to establish a shear zone in a strong matrix around a weak inclusion and for ultramylonite formation. Such strain weakening laws are also incorporated into the numerical models of the Southern and Central Kenya Rift that capture the characteristic tectonic evolution. A three-stage early rift evolution is suggested that starts with (1) the accommodation of strain by a single border fault and flexure of the hanging-wall crust, after which (2) faulting in the hanging-wall and the basin centre increases before (3) the early-stage asymmetry is lost and basinward localisation of deformation occurs. Along-strike variability of rifts can be produced by modifying the initial random noise distribution. In summary, the three studies address selected aspects of the broad range of mechanisms and processes that fundamentally enable the deformation of rock and govern the localisation patterns across the scales. In addition to the aforementioned results, the first and second manuscripts combined, demonstrate a procedure to find new or improve on existing numerical formulations for specific rheologies and their dynamic weakening. These formulations are essential in addressing rock deformation from the grain to the global scale. As within the third study of this thesis, where geodynamic controls on the evolution of a rift were examined and acquired by the integration of geological and geophysical data into a numerical model. N2 - Die Lokalisierung von Deformation ist ein allgegenwärtiges Merkmal in der Dynamik von Grabenbrüchen bzw. Riftzonen und wird über verschiedene Zeit- und Längenskalen beobachtet. Diese Arbeit umfasst eine experimentelle und zwei numerische Studien zur Untersuchung der Lokalisierung von Deformation in (1) einer durch eine Materialheterogenität induzierten duktilen Scherzone und (2) in einem aktiven Kontinentalgraben. Die Studien verbindet, dass die Schwächungsmechanismen auf der kristallographischen Skala und der Korngrößenskala eine Enthärtung eines Gesteinkörpers ermöglicht, was im Wesentlichen die Bildung von Scherzonen, Grabenbrüchen und damit Plattentektonik ermöglicht. Um die Kontrollmechanismen für die Initiierung und Entwicklung einer Scherzone zu untersuchen, wurden die Torsionsexperimente der experimentellen Studie in einem Patterson-Gerät an starken Carrara-Marmorzylinder mit einer schwachen, planaren Solnhofen-Kalksteineinschluss durchgeführt. Mit modernster numerischer Modellierungssoftware wurden die Torsionsexperimente simuliert, um weitere Fragen zum Lokalisierungsablauf wie die Verteilung der Spannung oder den Einfluss rheologischer Schwächung zu beantworten. Numerische 2D-Modelle wurden auch verwendet, um geophysikalische und geologische Daten zu kombinieren, um die charakteristische tektonische Entwicklung des südlichen und zentralen Kenia-Rifts zu erklären. Schlüsselelemente der verwendeten numerischen Werkzeuge sind eine randomisierte Anfangsverteilung des Strain und der Einsatz von Strain basierter Enthärtung. Während der Torsionsversuche lokalisiert die Deformation zunächst an den Kalksteineinschlussspitzen in einer Prozesszone, die sich mit zunehmender Deformation in die Marmormatrix ausbreitet bis sich eine duktile Scherzone einstellt. Neben den dominierenden duktilen Verformungsprozessen werden geringfügige Indikatoren für eine koexistierende spröde Verformung nahe der Einschlussspitzen gefunden und es wird angenommen, dass diese die Lokalisierung der Deformation geringfügig erleichtern. In erster Ordnung sagt das numerische 2D-Modell des Torsionsexperiments erfolgreich lokale Spannungskonzentration und Strainratenverstärkung vor der Inklusion in Übereinstimmung mit den experimentellen Ergebnissen vorher. Eine einfache lineare Parametrisierung der Enthärtung durch Strain ermöglicht eine genaue Reproduktion phänomenologischer Aspekte der beobachteten Schwächung. Die Torsionsexperimente legen nahe, dass die Randbedingungen die Lokalisierung des Strain während der Hochtemperaturverformung von Mehrphasenmaterial mit hohen Viskositätskontrasten nicht beeinflussen. Die numerische Simulation ermöglicht es, die Entwicklung der Prozesszone virtuell zu analysieren und den Untersuchungsrahmen zu erweitern. Darüber hinaus wurde die verschachtelte Struktur und anastomosierende Form eines Ultramylonitbandes mit einem zusätzlichen zweiten Enthärtungsschritt nachgeahmt. Die rheologische Schwächung ist notwendig, um eine Scherzone in einer starken Matrix um einen schwachen Einschluss herum und für die Ultramylonitbildung zu etablieren. Solche Schwächungsgesetze, die auf Strain basieren, fließen auch in die numerischen Modelle des südlichen und zentralen Kenia-Rifts ein, die die charakteristische tektonische Entwicklung erfassen. Es wird eine dreistufige frühe Riftentwicklung vorgeschlagen, die mit (1) der Anpassung von Spannungen durch eine einzelne Grenzstörung und Biegung der hangenden Kruste beginnt, wonach (2) die Verwerfung im Hangenden und im Beckenzentrum zunimmt, bevor (3) die Asymmetrie des Frühstadiums verloren geht und es zu einer beckenseitigen Deformationslokalisierung kommt. Die Variabilität von Rissen entlang des Rifts kann durch Modifizieren der anfänglichen zufälligen Rauschverteilung erzeugt werden. Zusammenfassend befassen sich die drei Studien mit ausgewählten Aspekten der breiten Palette von Mechanismen und Prozessen, die die Deformation von Gestein grundlegend ermöglichen und die Lokalisierungsmuster über die Skalen bestimmen. Zusätzlich zu den oben genannten Ergebnissen demonstrieren das erste und zweite Manuskript in Kombination ein Verfahren, um neue oder bestehende numerische Formulierungen für spezifische Rheologien und deren dynamische Schwächung zu finden oder zu verbessern. Diese Formulierungen sind essenziell, um Gesteinsverformung von der Korngrößen bis zur globalen Skala zu untersuchen. Wie in der dritten Studie dieser Dissertation, in der geodynamische Kontrollen auf die Entwicklung eines Grabenbruchs durch die Integration geologischer und geophysikalischer Daten in ein numerisches Modell untersucht und erfasst wurden. KW - Strain Localisation KW - Continental Rifts KW - Torsion Experiments KW - Geodynamic Modelling KW - 2D Numerical Modelling KW - Lokalisierung von Deformation KW - Grabenbrüche KW - Geodynamische Modellierung KW - Torsionsexperimente KW - Numerische 2D Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-550606 ER - TY - THES A1 - Robalo, João Ramiro Alavedra Mendes T1 - Investigating the role of fluorinated amino acids on protein structure and function using simulation Y1 - 2018 ER - TY - THES A1 - Robinson, Alexander T1 - Modeling the Greenland Ice Sheet response to climate change in the past and future T1 - Modellierung der Reaktion des Grönländischen Inlandeises auf den vergangenen und zukünftigen Klimawandel N2 - The Greenland Ice Sheet (GIS) contains enough water volume to raise global sea level by over 7 meters. It is a relic of past glacial climates that could be strongly affected by a warming world. Several studies have been performed to investigate the sensitivity of the ice sheet to changes in climate, but large uncertainties in its long-term response still exist. In this thesis, a new approach has been developed and applied to modeling the GIS response to climate change. The advantages compared to previous approaches are (i) that it can be applied over a wide range of climatic scenarios (both in the deep past and the future), (ii) that it includes the relevant feedback processes between the climate and the ice sheet and (iii) that it is highly computationally efficient, allowing simulations over very long timescales. The new regional energy-moisture balance model (REMBO) has been developed to model the climate and surface mass balance over Greenland and it represents an improvement compared to conventional approaches in modeling present-day conditions. Furthermore, the evolution of the GIS has been simulated over the last glacial cycle using an ensemble of model versions. The model performance has been validated against field observations of the present-day climate and surface mass balance, as well as paleo information from ice cores. The GIS contribution to sea level rise during the last interglacial is estimated to be between 0.5-4.1 m, consistent with previous estimates. The ensemble of model versions has been constrained to those that are consistent with the data, and a range of valid parameter values has been defined, allowing quantification of the uncertainty and sensitivity of the modeling approach. Using the constrained model ensemble, the sensitivity of the GIS to long-term climate change was investigated. It was found that the GIS exhibits hysteresis behavior (i.e., it is multi-stable under certain conditions), and that a temperature threshold exists above which the ice sheet transitions to an essentially ice-free state. The threshold in the global temperature is estimated to be in the range of 1.3-2.3°C above preindustrial conditions, significantly lower than previously believed. The timescale of total melt scales non-linearly with the overshoot above the temperature threshold, such that a 2°C anomaly causes the ice sheet to melt in ca. 50,000 years, but an anomaly of 6°C will melt the ice sheet in less than 4,000 years. The meltback of the ice sheet was found to become irreversible after a fraction of the ice sheet is already lost – but this level of irreversibility also depends on the temperature anomaly. N2 - Das grönländische Inlandeis (GIS) besteht aus einem Wasservolumen das ausreicht, um den globalen Meeresspiegel um 7 Meter ansteigen zu lassen. Es ist ein Relikt der vergangenen Eiszeit, das in einer zunehmend wärmer werdenden Welt stark in Mitleidenschaft gezogen werden könnte. In der vorliegenden Dissertation ist ein neues Verfahren zur Modellierung des Antwortverhaltens des Inlandeises auf Klimaänderungen entwickelt und angewendet worden. Die Vorteile des neuen Verfahrens im Vergleich zu den bisherigen Verfahren sind, (i) dass es über einen groen Bereich von Klimaszenarien (sowohl für die ferne Vergangenheit als auch für die Zukunft) anwendbar ist, (ii) dass es die wesentlichen Rückkopplungsprozesse zwischen Klima und Inlandeis enthält und (iii) dass es wegen seiner guten Rechenzeiteffizienz Simulationen über sehr lange Zeitskalen erlaubt. Das neue Modell (REMBO) ist für die Modellierung des Klimas und der Massenbilanz an der grönländischen Oberfläche entwickelt worden und stellt ein verbessertes Verfahren im Vergleich zu den bisherigen dar. Die Entwicklung von GIS über den letzten glazialen Zyklus ist mittels eines Ensembles von verschiedenen Modellversionen simuliert worden. Anschließend ist die Tauglichkeit der Modellversionen durch Vergleich mit Beobachtungsdaten des gegenwärtigen Klimas und der Oberflächenmassenbilanz, sowie mit paleoklimatischen Rekonstruktionen von Eisbohrkernen verifiziert worden. Der Anteil von GIS am Meeresspiegelanstieg während des letzten Interglazials ist im Bereich von 0.5 bis 4.1 m berechnet worden, was konsistent mit bisherigen Schätzungen ist. Von den Ensemblesimulationen sind diejenigen ausgewählt worden, deren Ergebnisse gut mit den Daten übereinstimmen. Durch die Auswahl von geeigneten Modellversionen sind gleichzeitig die Unsicherheiten der Parameterwerte begrenzt worden, so dass sich nun mit dem neuen Verfahren die Sensitivität von GIS auf Klimaänderungen bestimmen lässt. Mit den ausgewählten Modellversionen ist die Sensitivität von GIS auf langfristige Klimaänderungen untersucht worden. Es zeigt sich, dass das GIS ein Hystereseverhalten besitzt (d.h., eine Multistabilität für gewisse Klimazustände) und dass ein Temperaturschwellwert existiert. Bei Überschreiten des Schwellwertes bleibt das GIS nicht erhalten und wird langsam eisfrei werden. Der Temperaturschwellwert der globalen Mitteltemperatur relativ zur vorindustriellen Mitteltemperatur ist im Bereich 1.3-2.3°C ermittelt worden und liegt damit deutlich niedriger als bisher angenommen. Die Zeitdauer bis zum völligen Abschmelzen zeigt ein nichtlineares Verhalten hinsichtlich einer Erwärmung über den ermittelten Schwellwert. Eine Erwärmung von 2°C relativ zur vorindustriellen Zeit führt zu einem Abschmelzen nach 50.000 Jahren, aber eine Erwärmung um 6°C lässt das Inlandeis bereits nach 4.000 Jahren abschmelzen. Ein weiteres Ergebnis ist, dass der Abschmelzvorgang irreversibel werden kann, nachdem ein gewisser Anteil des Inlandeises abgeschmolzen ist – jedoch ist die Irreversibilität eines Abschmelzvorganges auch von der Temperaturanomalie abhängig. KW - Grönland KW - Inlandeis KW - Klimawandel KW - Stabilität KW - Hysterese KW - Greenland KW - ice sheet KW - climate change KW - stability KW - hysteresis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-50430 ER - TY - THES A1 - Rolo, David T1 - Assembly of photosystem I in thylakoid membranes T1 - Die Assemblierung des Photosystems I in der Thylakoidmembran N2 - The light reactions of photosynthesis are carried out by a series of multiprotein complexes embedded in thylakoid membranes. Among them, photosystem I (PSI), acting as plastocyanin-ferderoxin oxidoreductase, catalyzes the final reaction. Together with light-harvesting antenna I, PSI forms a high-molecular-weight supercomplex of ~600 kDa, consisting of eighteen subunits and nearly two hundred co-factors. Assembly of the various components into a functional thylakoid membrane complex requires precise coordination, which is provided by the assembly machinery. Although this includes a small number of proteins (PSI assembly factors) that have been shown to play a role in the formation of PSI, the process as a whole, as well as the intricacy of its members, remains largely unexplored. In the present work, two approaches were used to find candidate PSI assembly factors. First, EnsembleNet was used to select proteins thought to be functionally related to known PSI assembly factors in Arabidopsis thaliana (approach I), and second, co-immunoprecipitation (Co-IP) of tagged PSI assembly factors in Nicotiana tabacum was performed (approach II). Here, the novel PSI assembly factors designated CO-EXPRESSED WITH PSI ASSEMBLY 1 (CEPA1) and Ycf4-INTERACTING PROTEIN 1 (Y4IP1) were identified. A. thaliana null mutants for CEPA1 and Y4IP1 showed a growth phenotype and pale leaves compared with the wild type. Biophysical experiments using pulse amplitude modulation (PAM) revealed insufficient electron transport on the PSII acceptor side. Biochemical analyses revealed that both CEPA1 and Y4IP1 are specifically involved in PSI accumulation in A. thaliana at the post-translational level but are not essential. Consistent with their roles as factors in the assembly of a thylakoid membrane protein complex, the two proteins localize to thylakoid membranes. Remarkably, cepa1 y4ip1 double mutants exhibited lethal phenotypes in early developmental stages under photoautotrophic growth. Finally, co-IP and native gel experiments supported a possible role for CEPA1 and Y4IP1 in mediating PSI assembly in conjunction with other PSI assembly factors (e.g., PPD1- and PSA3-CEPA1 and Ycf4-Y4IP1). The fact that CEPA1 and Y4IP1 are found exclusively in green algae and higher plants suggests eukaryote-specific functions. Although the specific mechanisms need further investigation, CEPA1 and Y4IP1 are two novel assembly factors that contribute to PSI formation. N2 - Die Lichtreaktionen der Photosynthese werden von einer Reihe von Multiproteinkomplexen durchgeführt, die in Thylakoidmembranen eingebettet sind. Hier katalysiert das Photosystem I (PSI), das als Plastocyanin-Ferderoxin-Oxidoreduktase fungiert, die letzte Reaktion. Zusammen mit der lichtsammelnden Antenne I bildet PSI einen hochmolekularen Superkomplex von etwa 600 kDa, der aus achtzehn Untereinheiten und fast zweihundert Co-Faktoren besteht. Der Zusammenbau der verschiedenen Komponenten zu einem funktionsfähigen Thylakoidmembrankomplex erfordert eine präzise Koordination, die durch den Assemblierungsapparat gewährleistet wird. Obwohl dieser eine kleine Anzahl von Proteinen (PSI-Assemblierungsfaktoren) umfasst, die nachweislich eine Rolle bei der Bildung des PSI spielen, ist der Prozess als Ganzes sowie die Komplexität seiner Mitglieder noch weitgehend unerforscht. In der vorliegenden Arbeit wurden zwei Ansätze verwendet, um Kandidaten für PSI-Assemblierungsfaktoren zu finden. Erstens wurde EnsembleNet verwendet, um Proteine auszuwählen, von denen angenommen wird, dass sie funktionell mit bekannten PSI-Assemblierungsfaktoren in Arabidopsis thaliana verwandt sind (Ansatz I), und zweitens wurde eine Co-Immunopräzipitation (Co-IP) von markierten PSI-Assemblierungsfaktoren in Nicotiana tabacum durchgeführt (Ansatz II). Dabei wurden die neuartigen PSI-Assemblierungsfaktoren mit der Bezeichnung CO-EXPRESSED WITH PSI ASSEMBLY 1 (CEPA1) und Ycf4-INTERACTING PROTEIN 1 (Y4IP1) identifiziert. A. thaliana Nullmutanten für CEPA1 und Y4IP1 zeigten einen Wachstumsphänotyp und blasse Blätter im Vergleich zum Wildtyp. Biophysikalische Experimente unter Verwendung der Pulsamplitudenmodulation (PAM) zeigten einen unzureichenden Elektronentransport auf der PSII-Akzeptorseite. Biochemische Analysen ergaben, dass sowohl CEPA1 als auch Y4IP1 spezifisch an der PSI-Akkumulation in A. thaliana auf posttranslationaler Ebene beteiligt, jedoch nicht essentiell sind. Entsprechend ihrer Rolle als Faktoren für den Aufbau eines Thylakoidmembran-Proteinkomplexes sind die beiden Proteine an Thylakoidmembranen lokalisiert. Bemerkenswerterweise wiesen cepa1 y4ip1-Doppelmutanten in frühen Entwicklungsstadien unter photoautotrophem Wachstum tödliche Phänotypen auf. Schließlich untermauerten Co-IP- und native Gelexperimente eine mögliche Rolle von CEPA1 und Y4IP1 bei der Vermittlung des PSI-Aufbaus in Verbindung mit anderen PSI-Aufbaufaktoren (z. B. PPD1- und PSA3-CEPA1, und Ycf4-Y4IP1). Die Tatsache, dass CEPA1 und Y4IP1 ausschließlich in Grünalgen und höheren Pflanzen vorkommen, lässt auf eukaryontenspezifische Funktionen schließen. Obwohl die spezifischen Mechanismen noch weiter untersucht werden müssen, sind CEPA1 und Y4IP1 zwei neuartige Assemblierungsfaktoren, die zur PSI-Bildung beitragen. KW - photosynthesis KW - photosystem I KW - biogenesis KW - thylakoid membranes KW - assembly factor KW - Photosynthese KW - Photosystem I KW - Biogenese KW - Thylakoidmembran KW - Assemblierungsfaktor Y1 - 2023 ER - TY - THES A1 - Ruch, Joël T1 - Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations T1 - Vulkan Deformationsanalyse im Bereich Lazufre (Zentral-Anden) mit geodätischen und geologischen Beobachtungen N2 - Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring. N2 - Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation des Vulkans und vulkanischen Strukturen innerhalb der betroffenen Gegend. Wir folgern daraus, dass diese Beobachtungen der Ausdruck eines langlebigen, magmatischen Systems in der Tiefe an der Oberfläche sind. Es ist noch nicht klar, ob Lazufre größere vulkanische Unruhen, wie zum Beispiel Eruptionen auslösen könnte, aber die Deformation am Vulkan Lastarria und ein Anstieg der großräumigen Deformationsrate, machen diese Region interessant für eine zukünftige, kontinuierliche Überwachung. KW - Vulkan Verformung KW - InSAR KW - zentralen Anden KW - Spannungsfeld KW - volcano deformation KW - InSAR KW - central Andes KW - stress field Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-47361 ER - TY - THES A1 - Ruiz Rodriguez, Janete Lorena T1 - Osmotic pressure effects on collagen mimetic peptides N2 - Collagen is the most abundant protein in mammals. In many tissues, collagen molecules assemble to form a hierarchical structure. In the smallest supramolecular unit, named fibril, each molecule is displaced in the axial direction with respect to its neighbors. This staggering creates a periodic gap and overlap regions, where the gap regions exhibit 20% less density. These fibril-forming collagens play an essential role in the strength of connective tissues. Despite much effort, directed at understanding collagen function and regulation, the influence of the chemical environment on the local structural and mechanical properties remains poorly understood. Recent studies, aimed at elucidating the effect of osmotic pressure, showed that collagen contracts upon water removal. This observation highlights the importance of water for the stabilization and mechanics of the collagen molecule. Using collagen mimetic peptides (CMPs), which fold into triple helical structures reminiscent of natural collagen, the primary goal of this work was to investigate the effect of the osmotic pressure on specific collagen-mimetic sequences. CMPs were used as the model system as they provide sequence control, which is essential for discriminating local from global structural changes and for relating the observed effects to existing knowledge about the full-length collagen molecule. Of specific interest was the structure of individual collagen triple helices as well as their organization into self-assembled higher order structures. These key structural features were monitored with infrared spectroscopy (IR) and synchrotron X-ray scattering, while varying the osmotic pressure. For controlling the osmotic pressure, CMP powder samples were incubated in air of defined relative humidity, ranging from dry conditions to highly “humid”. In addition, to obtain more biologically relevant conditions, the CMPs were measured in ultrapure water and in solutions containing small molecule osmolytes. Using the sequences (Pro-Pro-Gly)10, (Pro-Hyp-Gly)10 and (Hyp-Hyp-Gly)10, it was shown that CMPs with different degrees of proline hydroxylation (Hyp = hydroxyproline) exhibit a sequence-specific response to osmotic pressure. IR spectroscopy revealed that osmotic pressure changes affect the strength of the triple helix stabilizing, interchain hydrogen bond and that the extent of this change depends on the degree of hydroxylation. X-ray scattering experiments further showed that changes in osmotic pressure affect both the molecular length as well as the higher order organization of CMPs. Starting from a pseudo-hexagonal packing in the dry state, all three CMPs showed isotropic swelling when increasing the water content to approximately 1.2 water molecules per amino acid, again to different extents depending on the degree of hydroxylation. When increasing the water content further, this pseudo-hexagonal arrangement breaks down. In the fully hydrated state, each CMP is characterized by its own specific and more complex packing geometry. While these changes in the lateral packing arrangement suggest swelling upon hydration, an overall decrease of the molecular length (i.e. contraction) was observed in the axial direction. Also for this structural feature, a strong dependency on the specific amino acid sequence was found. Interestingly, the observed contraction is the opposite of what has been reported for natural collagen. As (Pro-Pro-Gly)n, (Pro-Hyp-Gly)n and (Hyp-Hyp-Gly)n repeat units are found in collagen with a relatively high abundance, this suggests that other collagen sequence fragments need to respond to hydration in the opposite way to obtain a net elongation of the full-length collagen molecule. To test this hypothesis, sequences predicted to be sensitive to osmotic pressure were considered. One such sequence, consisting of two repeat units (Ala-Arg-Gly-Ser-Asp-Gly), was inserted as a guest into a (Pro-Pro-Gly) host. When compared to the canonical CMP sequences investigated earlier, the lateral helix packing follows a similar trend with increasing hydration; however, the host-guest CMP axially elongates with increasing water content. This behavior is more similar to what has been found for natural collagen and suggests that different sequences do determine the molecular length of collagen sequences differently. Interestingly, the canonical sequences are more abundant in the overlap region while the guest sequence is found in the gap region. This allows to speculate that sequences in the gap and overlap regions possess a specifically fine-tuned local response to osmotic pressure changes. Clearly, more experiments with additional sequences are needed to confirm this. In conclusion, the results obtained in this work indicate a highly sequence specific interaction between collagen and water. Osmotic pressure-induced conformational changes mostly originate from local geometries and bonding patterns and affect both the structure of individual triple helices as well as higher order assemblies. One key remaining question is how these conformational changes affect the local mechanical properties of the collagen molecule. As a first step, the stiffness (persistence length) of full-length collagen was determined using atomic force microscopy. In the future, experimental strategies need to be developed that allow for investigating the mechanical properties of specific collagen sequences, e.g. performing single-molecule force spectroscopy of CMPs. Y1 - 2019 ER - TY - THES A1 - Rust, Henning T1 - Detection of long-range dependence : applications in climatology and hydrology T1 - Detektion langreichweitiger Korrelationen : Anwendungen in Klimatologie und Hydrologie N2 - It is desirable to reduce the potential threats that result from the variability of nature, such as droughts or heat waves that lead to food shortage, or the other extreme, floods that lead to severe damage. To prevent such catastrophic events, it is necessary to understand, and to be capable of characterising, nature's variability. Typically one aims to describe the underlying dynamics of geophysical records with differential equations. There are, however, situations where this does not support the objectives, or is not feasible, e.g., when little is known about the system, or it is too complex for the model parameters to be identified. In such situations it is beneficial to regard certain influences as random, and describe them with stochastic processes. In this thesis I focus on such a description with linear stochastic processes of the FARIMA type and concentrate on the detection of long-range dependence. Long-range dependent processes show an algebraic (i.e. slow) decay of the autocorrelation function. Detection of the latter is important with respect to, e.g. trend tests and uncertainty analysis. Aiming to provide a reliable and powerful strategy for the detection of long-range dependence, I suggest a way of addressing the problem which is somewhat different from standard approaches. Commonly used methods are based either on investigating the asymptotic behaviour (e.g., log-periodogram regression), or on finding a suitable potentially long-range dependent model (e.g., FARIMA[p,d,q]) and test the fractional difference parameter d for compatibility with zero. Here, I suggest to rephrase the problem as a model selection task, i.e.comparing the most suitable long-range dependent and the most suitable short-range dependent model. Approaching the task this way requires a) a suitable class of long-range and short-range dependent models along with suitable means for parameter estimation and b) a reliable model selection strategy, capable of discriminating also non-nested models. With the flexible FARIMA model class together with the Whittle estimator the first requirement is fulfilled. Standard model selection strategies, e.g., the likelihood-ratio test, is for a comparison of non-nested models frequently not powerful enough. Thus, I suggest to extend this strategy with a simulation based model selection approach suitable for such a direct comparison. The approach follows the procedure of a statistical test, with the likelihood-ratio as the test statistic. Its distribution is obtained via simulations using the two models under consideration. For two simple models and different parameter values, I investigate the reliability of p-value and power estimates obtained from the simulated distributions. The result turned out to be dependent on the model parameters. However, in many cases the estimates allow an adequate model selection to be established. An important feature of this approach is that it immediately reveals the ability or inability to discriminate between the two models under consideration. Two applications, a trend detection problem in temperature records and an uncertainty analysis for flood return level estimation, accentuate the importance of having reliable methods at hand for the detection of long-range dependence. In the case of trend detection, falsely concluding long-range dependence implies an underestimation of a trend and possibly leads to a delay of measures needed to take in order to counteract the trend. Ignoring long-range dependence, although present, leads to an underestimation of confidence intervals and thus to an unjustified belief in safety, as it is the case for the return level uncertainty analysis. A reliable detection of long-range dependence is thus highly relevant in practical applications. Examples related to extreme value analysis are not limited to hydrological applications. The increased uncertainty of return level estimates is a potentially problem for all records from autocorrelated processes, an interesting examples in this respect is the assessment of the maximum strength of wind gusts, which is important for designing wind turbines. The detection of long-range dependence is also a relevant problem in the exploration of financial market volatility. With rephrasing the detection problem as a model selection task and suggesting refined methods for model comparison, this thesis contributes to the discussion on and development of methods for the detection of long-range dependence. N2 - Die potentiellen Gefahren und Auswirkungen der natürlicher Klimavariabilitäten zu reduzieren ist ein wünschenswertes Ziel. Solche Gefahren sind etwa Dürren und Hitzewellen, die zu Wasserknappheit führen oder, das andere Extrem, Überflutungen, die einen erheblichen Schaden an der Infrastruktur nach sich ziehen können. Um solche katastrophalen Ereignisse zu vermeiden, ist es notwendig die Dynamik der Natur zu verstehen und beschreiben zu können. Typischerweise wird versucht die Dynamik geophysikalischer Datenreihen mit Differentialgleichungssystemen zu beschreiben. Es gibt allerdings Situationen in denen dieses Vorgehen nicht zielführend oder technisch nicht möglich ist. Dieses sind Situationen in denen wenig Wissen über das System vorliegt oder es zu komplex ist um die Modellparameter zu identifizieren. Hier ist es sinnvoll einige Einflüsse als zufällig zu betrachten und mit Hilfe stochastischer Prozesse zu modellieren. In dieser Arbeit wird eine solche Beschreibung mit linearen stochastischen Prozessen der FARIMA-Klasse angestrebt. Besonderer Fokus liegt auf der Detektion von langreichweitigen Korrelationen. Langreichweitig korrelierte Prozesse sind solche mit einer algebraisch, d.h. langsam, abfallenden Autokorrelationsfunktion. Eine verläßliche Erkennung dieser Prozesse ist relevant für Trenddetektion und Unsicherheitsanalysen. Um eine verläßliche Strategie für die Detektion langreichweitig korrelierter Prozesse zur Verfügung zu stellen, wird in der Arbeit ein anderer als der Standardweg vorgeschlagen. Gewöhnlich werden Methoden eingesetzt, die das asymptotische Verhalten untersuchen, z.B. Regression im Periodogramm. Oder aber es wird versucht ein passendes potentiell langreichweitig korreliertes Modell zu finden, z.B. aus der FARIMA Klasse, und den geschätzten fraktionalen Differenzierungsparameter d auf Verträglichkeit mit dem trivialen Wert Null zu testen. In der Arbeit wird vorgeschlagen das Problem der Detektion langreichweitiger Korrelationen als Modellselektionsproblem umzuformulieren, d.h. das beste kurzreichweitig und das beste langreichweitig korrelierte Modell zu vergleichen. Diese Herangehensweise erfordert a) eine geeignete Klasse von lang- und kurzreichweitig korrelierten Prozessen und b) eine verläßliche Modellselektionsstrategie, auch für nichtgenestete Modelle. Mit der flexiblen FARIMA-Klasse und dem Whittleschen Ansatz zur Parameterschätzung ist die erste Voraussetzung erfüllt. Hingegen sind standard Ansätze zur Modellselektion, wie z.B. der Likelihood-Ratio-Test, für nichtgenestete Modelle oft nicht trennscharf genug. Es wird daher vorgeschlagen diese Strategie mit einem simulationsbasierten Ansatz zu ergänzen, der insbesondere für die direkte Diskriminierung nichtgenesteter Modelle geeignet ist. Der Ansatz folgt einem statistischen Test mit dem Quotienten der Likelihood als Teststatistik. Ihre Verteilung wird über Simulationen mit den beiden zu unterscheidenden Modellen ermittelt. Für zwei einfache Modelle und verschiedene Parameterwerte wird die Verläßlichkeit der Schätzungen für p-Wert und Power untersucht. Das Ergebnis hängt von den Modellparametern ab. Es konnte jedoch in vielen Fällen eine adäquate Modellselektion etabliert werden. Ein wichtige Eigenschaft dieser Strategie ist, dass unmittelbar offengelegt wird, wie gut sich die betrachteten Modelle unterscheiden lassen. Zwei Anwendungen, die Trenddetektion in Temperaturzeitreihen und die Unsicherheitsanalyse für Bemessungshochwasser, betonen den Bedarf an verläßlichen Methoden für die Detektion langreichweitiger Korrelationen. Im Falle der Trenddetektion führt ein fälschlicherweise gezogener Schluß auf langreichweitige Korrelationen zu einer Unterschätzung eines Trends, was wiederum zu einer möglicherweise verzögerten Einleitung von Maßnahmen führt, die diesem entgegenwirken sollen. Im Fall von Abflußzeitreihen führt die Nichtbeachtung von vorliegenden langreichweitigen Korrelationen zu einer Unterschätzung der Unsicherheit von Bemessungsgrößen. Eine verläßliche Detektion von langreichweitig Korrelierten Prozesse ist somit von hoher Bedeutung in der praktischen Zeitreihenanalyse. Beispiele mit Bezug zu extremem Ereignissen beschränken sich nicht nur auf die Hochwasseranalyse. Eine erhöhte Unsicherheit in der Bestimmung von extremen Ereignissen ist ein potentielles Problem von allen autokorrelierten Prozessen. Ein weiteres interessantes Beispiel ist hier die Abschätzung von maximalen Windstärken in Böen, welche bei der Konstruktion von Windrädern eine Rolle spielt. Mit der Umformulierung des Detektionsproblems als Modellselektionsfrage und mit der Bereitstellung geeigneter Modellselektionsstrategie trägt diese Arbeit zur Diskussion und Entwicklung von Methoden im Bereich der Detektion von langreichweitigen Korrelationen bei. KW - langreichweitige Korrelationen KW - nichtgenestete Modellselektion KW - FARIMA KW - Unsicherheitsanalyse KW - Bemessungshochwasser KW - long-range dependence KW - long-memory KW - non-nested model selection KW - FARIMA KW - uncertainty analysis KW - return level estimation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13347 ER - TY - THES A1 - Sarnes-Nitu, Juliane T1 - Mit der Schuldenbremse zu nachhaltigen Staatsfinanzen? T1 - Will the debt brake ensure fiscal sustainability? BT - Wirkungen der neuen Fiskalregel auf die deutschen Bundesländer BT - the new fiscal rule‘s impact on German regional governments N2 - The core question of this paper is: Does the debt brake secure fiscal sustainability in Germany? To answer this question, we will first examine the effects of the introduction of the debt brake on the German federal states in the period 2010-16. For this purpose, the observed consolidation performance and the consolidation incentive or pressure experienced by the federal states were evaluated with the help of a scorecard specifically developed for this purpose. Multiple regression analysis was used to analyze how the scorecard factors affect the consolidation performance of the federal states. It found that nearly 90% of the variation was explained by the independent variables budgetary position, debt burden, revenue growth and pension burden. Thus the debt brake likely played a subordinate role in the 2009-2016 consolidation episode. Subsequently, the data collected in 65 expert interviews was used to analyze the limits of the new fiscal rule, and to determine which potential risks could hinder or prevent the debt brake in the future: municipal debt, FEUs, contingent liabilities in the form of guarantees for financial institutions and pension obligations. The frequently expressed criticism that the debt brake impedes economic growth and public investments is also reviewed and rejected. Finally, we discuss potential future developments regarding the debt brake and the German public administration as well as future consolidation efforts of the Länder. N2 - Die Kernfrage der vorliegenden Arbeit lautet: Sichert die Schuldenbremse die fiskalische Nachhaltigkeit in Deutschland? Zur Beantwortung dieser Frage wird zunächst untersucht, welche Vor-Wirkungen die Einführung der Schuldenbremse im Zeitraum 2010-16 auf die deutschen Bundesländer zeitigte. Dafür wurden die beobachtete Konsolidierungsleistung und der 2009 bestehende Konsolidierungsanreiz bzw. –druck der Bundesländer mit Hilfe einer eigens zu diesem Zweck entwickelten Scorecard evaluiert. Mittels multipler Regressionsanalyse wurde dann analysiert, wie die Faktoren der Scorecard die Konsolidierungsleistung der Bun- desländer beeinflussen. Dabei wurde festgestellt, dass beinahe 90% der Variation, durch die unabhängigen Variablen Haushaltslage, Schuldenlast, Einnahmenwachstum und Pensionslast erklärt werden und der Schuldenbremse bei der Konsolidierungsepisode 2009-2016 eher eine untergeordnete Rolle zugefallen sein dürfte. Anschließend wurde mithilfe der in 65 Expertinneninterviews gesammelten Daten analysiert, welche Grenzen der neuen Fiskalregel in ihrem Wirken gesetzt sind, bzw. welche Risiken zukünftig die Einhaltung der Schuldenbremse erschweren oder verhindern könnten: Kommunalverschuldung, FEUs, Eventualverpflichtungen in Form von Bürgschaften für Finanzinstitute und Pensionsverpflichtungen. Die häufig geäußerten Kritikpunkte, die Schuldenbremse sei eine Konjunktur- und Investitionsbremse werden ebenfalls überprüft und zurückgewiesen. Schließlich werden potentielle zukünftige Entwicklungen hinsichtlich der Schuldenbremse und der öffentlichen Verwaltung in Deutschland sowie der Konsolidierungsbemühungen der Länder erörtert. KW - public finance KW - fiscal rules KW - debt brake KW - rational choice KW - Germany KW - governance KW - consolidation KW - Schuldenbremse KW - Fiskalregeln KW - Deutschland KW - Bundesländer KW - Staatsverschuldung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-413804 ER - TY - THES A1 - Schauer, Nicolas T1 - Quantitative trait loci (QTL) for metabolite accumulation and metabolic regulation : metabolite profiling of interspecific crosses of tomato T1 - Metabolomische Analyse von interspezifischen Tomaten N2 - The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample. Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of S. pennellii introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation. N2 - Die Einführung von Hochdurchsatzmethoden zur Analyse von biologischen Systemen, sowie die umfangreiche Sequenzierung von Genomen haben zu einer Verlagerung der Forschung „im Detail“ zu einer ganzheitlicheren Betrachtungsweise auf Systemebene geführt. Aus einer jahrhundertlangen, intensiven Züchtung und Selektion von Nutzpflanzen resultierte gleichzeitig eine Abnahme der genetischen Varianz. Daraus resultierend sind Nutzpflanzen anfälliger gegenüber Stressfaktoren, wie Pathogenen, hohen Salzkonzentrationen oder Trockenheit, als ihre Wildarten. Das Potential konventioneller Züchtung scheint somit heute an seine Grenzen gekommen zu sein. Daher versucht man mittels moderner Molekulartechnik, wie zum Beispiel Marker-gestützte Selektion, Gene oder ganze Genombereiche von Wildarten mit hoher genetischer Variation in Nutzpflanzen einzukreuzen, vornehmlich mit dem Ziel einer Ertrags- bzw. Resistenzsteigerung. Neueste medizinische Studien belegen, dass die Ernährung eine wesentliche Rolle für die menschliche Gesundheit spielt. Besonders wichtig sind hierbei die gesundheitsfördernden Substanzen in pflanzlichen Nahrungsmitteln. Aus diesem Grund kommt der Erforschung der biochemischen Zusammensetzung von biologischen Proben eine immer größere Bedeutung zu. Diese Untersuchung kann elegant durch Metabolitenprofile, welche die multivariate Analyse komplexer biologischer Proben erlauben, durchgeführt werden. In dieser Arbeit wurde zur Untersuchung der biochemischen Zusammensetzung von Tomatenwildarten und interspezifischen S. pennellii Tomatenintrogressionslinien (IL) eine GC/MS basierte Metabolitenanalyseplattform verwendet. Hierzu war es zunächst notwendig eine Massenspektrenbibliothek, zur Annotierung von Massenspektren und Retentionsindices von, in pflanzlichen Proben vorkommenden, Metaboliten anzulegen. Die Analyse der Tomatenwildarten ergab große Unterschiede gegenüber der Kulturtomate im Hinblick auf den Gehalt an Amino- und organischen Säuren, sowie der Zuckerzusammensetzung und den Gehalt an Sekundärmetaboliten. Die darauf folgende Analyse der ILs, von den jede ein genau definiertes genomisches Segment von S. pennellii beinhaltet, bestätigte diese enorme Variation mit 889 metabolischen und 326 ertragsassozierten-Veränderungen in den ILs. Die metabolischen Veränderungen zeichneten sich durch abnehmende bzw. steigende Gehalte von einzelnen Metaboliten, aber auch durch eine koordinierte Änderung aus. In dieser Arbeit wurde weiterhin der Biosyntheseweg der Volatilenstoffe Phenylethanol und Phenylacetaldehyd mit Hilfe einer IL untersucht. Hierbei konnten durch stabile Isotopenmarkierung und eines „reverse genetics“-Ansatzes Gene bzw. Enzyme identifiziert werden, die für die Dekarboxylierung des Eduktes Phenylalanin verantwortlich sind. Diese Arbeit beschreibt erstmals die umfassende Analyse von biochemischen Komponenten auf Genombasis in Tomatenintrogressionslinien und zeigt damit ein Werkzeug auf zur Identifizierung von qualitativen biochemischen Merkmalen in der modernen molekularen Züchtung. KW - Tomate KW - Metabolit KW - GC-MS KW - Introgression KW - Frucht KW - Metabolome KW - Züchtung KW - metabolic genomics KW - Tomato KW - metabolite profiling KW - metabolome KW - breeding KW - crops KW - fruit KW - metabolite breeding KW - metabolic genomics Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7643 ER - TY - THES A1 - Schifferle, Lukas T1 - Optical properties of (Mg,Fe)O at high pressure T1 - Optische Eigenschaften von (Mg,Fe)O unter Hochdruck N2 - Large parts of the Earth’s interior are inaccessible to direct observation, yet global geodynamic processes are governed by the physical material properties under extreme pressure and temperature conditions. It is therefore essential to investigate the deep Earth’s physical properties through in-situ laboratory experiments. With this goal in mind, the optical properties of mantle minerals at high pressure offer a unique way to determine a variety of physical properties, in a straight-forward, reproducible, and time-effective manner, thus providing valuable insights into the physical processes of the deep Earth. This thesis focusses on the system Mg-Fe-O, specifically on the optical properties of periclase (MgO) and its iron-bearing variant ferropericlase ((Mg,Fe)O), forming a major planetary building block. The primary objective is to establish links between physical material properties and optical properties. In particular the spin transition in ferropericlase, the second-most abundant phase of the lower mantle, is known to change the physical material properties. Although the spin transition region likely extends down to the core-mantle boundary, the ef-fects of the mixed-spin state, where both high- and low-spin state are present, remains poorly constrained. In the studies presented herein, we show how optical properties are linked to physical properties such as electrical conductivity, radiative thermal conductivity and viscosity. We also show how the optical properties reveal changes in the chemical bonding. Furthermore, we unveil how the chemical bonding, the optical and other physical properties are affected by the iron spin transition. We find opposing trends in the pres-sure dependence of the refractive index of MgO and (Mg,Fe)O. From 1 atm to ~140 GPa, the refractive index of MgO decreases by ~2.4% from 1.737 to 1.696 (±0.017). In contrast, the refractive index of (Mg0.87Fe0.13)O (Fp13) and (Mg0.76Fe0.24)O (Fp24) ferropericlase increases with pressure, likely because Fe Fe interactions between adjacent iron sites hinder a strong decrease of polarizability, as it is observed with increasing density in the case of pure MgO. An analysis of the index dispersion in MgO (decreasing by ~23% from 1 atm to ~103 GPa) reflects a widening of the band gap from ~7.4 eV at 1 atm to ~8.5 (±0.6) eV at ~103 GPa. The index dispersion (between 550 and 870 nm) of Fp13 reveals a decrease by a factor of ~3 over the spin transition range (~44–100 GPa). We show that the electrical band gap of ferropericlase significantly widens up to ~4.7 eV in the mixed spin region, equivalent to an increase by a factor of ~1.7. We propose that this is due to a lower electron mobility between adjacent Fe2+ sites of opposite spin, explaining the previously observed low electrical conductivity in the mixed spin region. From the study of absorbance spectra in Fp13, we show an increasing covalency of the Fe-O bond with pressure for high-spin ferropericlase, whereas in the low-spin state a trend to a more ionic nature of the Fe-O bond is observed, indicating a bond weakening effect of the spin transition. We found that the spin transition is ultimately caused by both an increase of the ligand field-splitting energy and a decreasing spin-pairing energy of high-spin Fe2+. N2 - Geodynamische Prozesse werden von den physikalischen Materialeigenschaften unter den extremen Druck- und Temperaturbedingungen des Erdinneren gesteuert, gerade diese Areale sind aber faktisch nicht für direkte Beobachtungen zugänglich. Umso wichtiger ist es, die physikalischen Eigenschaften unter Bedingungen des Erdinneren zu untersuchen. Mit diesem Ziel vor Augen erlaubt das Studium der optischen Eigenschaften von Mineralen des Erdmantels, eine große Bandbreite an physikalischen Materialeigenschaften, in einer einfachen, reproduzierbaren und effizienten Art und Weise zu bestimmen. Dadurch bieten sich wichtige Einblicke in die physikalischen Prozessen des Erdinneren. Die vorliegende Arbeit konzentriert sich auf das System Mg-Fe-O, im Speziellen auf Periklas (MgO) und seine Eisen-haltige Variante Ferroperiklas ((Mg,Fe)O), ein wichtiger Baustein planetarer Körper. Das Hauptziel der Arbeit besteht darin Verbindungen zwischen optischen Eigenschaften und physikalischen Materialeigenschaften zu finden. Gerade der Spin-Übergang in Ferroperiklas, der zweithäufigsten Phase des unteren Erdmantels, ist dabei von Bedeutung, da damit Veränderungen in den physikalischen Materialeigenschaften einhergehen. Obwohl sich der Spinübergangsbereich vermutlich bis zur Kern-Mantel-Grenze erstreckt, sind die Auswirkungen des gemischten Spin-Zustandes, bei dem sowohl Hoch- als auch Tief-Spin präsent sind, nur unzureichend untersucht. Die hier vorgestellten Studien zeigen, wie optische Eigenschaften mit anderen wichtigen physikalischen Eigenschaften wie elektrischer und thermischer Leitfähigkeit, Viskosität oder auch mit der chemischen Bindung verbunden sind. Daraus lässt sich auch ableiten wie der Spin-Übergang in Ferroperiklas diese Eigenschaften beeinflusst. Von Raumbedingungen bis zu ~140 GPa sinkt der Brechungsindex von MgO um ~2.4 % von 1.737 auf 1.696 (±0.017). Im Gegensatz dazu steigt der Brechungsindex von (Mg0.87Fe0.13)O (Fp13) und (Mg0.76Fe0.24)O (Fp24) Ferroperiklas mit dem Druck an. Dies ist auf Fe-Fe Wechselwirkungen zwischen benachbarten Eisenpositionen zurückzuführen, die eine starke Verringerung der Polarisierbarkeit, wie im Falle von reinem MgO mit zunehmender Dichte, behindern. Eine Analyse der Dispersion des Brechungsindexes von MgO (Abnahme um ~23 % von 1 Atm zu ~103 GPa) offenbart eine Verbreiterung der Bandlücke von ~7.4 eV bei 1 Atm zu ~8.5 (±0.6) eV bei ~103 GPa. Die Messung der Dispersion (zwischen 550 und 870 nm) in Fp13 zeigt eine starke Abnahme über den Bereich des Spin-Überganges (~44–100 GPa) bis zu einem Faktor von ~3. Die Bandlücke nimmt in der Region des gemischten Spin-Zustandes signifikant auf bis zu ~4.7 eV zu (entspricht einer Zunahme um den Faktor ~1.7). Dies deutet auf eine Verringerung der Elektronen-Mobilität zwischen benachbarten Fe2+-Positionen mit unterschiedlichem Spin-Zustand hin, was die bereits in früheren Arbeiten beobachtete Abnahme der elektrischen Leitfähigkeit im Bereich des gemischten Spin-Zustandes erklärt. Absorptionsspektren an Fp13 zeigen eine Druck-bedingte Zunahme der Kovalenz der Fe-O Bindung für Ferroperiklas im Hoch-Spin Zustand, wohingegen Tief-Spin Ferroperiklas einen Trend zu einer mehr ionischen Fe-O Bindung auf-weist, was auf einen Bindungs-schwächenden Effekt des Spin-Wechsels hinweist. Der Übergang von Hoch- zu Tiefspin ist letztlich auf eine Zunahme der Ligandenfeldaufspaltungsenergie sowie eine abnehmende Spinpaarungsenergie von Hoch-Spin Fe2+ zurückzuführen. KW - optical properties KW - optische Eigenschaften KW - high pressure KW - Hochdruck KW - earth mantle KW - Erdmantel KW - diamond anvil cell KW - Diamantstempelzelle KW - ferropericlase KW - Ferroperiklas KW - spectroscopy KW - Spektroskopie Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-622166 ER - TY - THES A1 - Schimpf, Stefan T1 - Herkunft und Ablagerungsmilieu quartärer Sedimente im Einzugsgebiet des Heihe, NW China N2 - Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen. N2 - The Central Asian natural space, as it presents itself today, is the result of a combination of many different factors over millions of years. However, in the current context of climate change it becoming obvious how strongly material fluxes can change in the short-term and thereby transform the face of the landscape. As a large long-term archive of different fluvial, lacustrine and aeolian sediments, the Gobi Desert in Inner Mongolia (China) represents a significant locality for the reconstruction of local and regional material flows as well as an important source for supra-regional dust transport due to erosion by aeolian processes. This, in connection with its location to the Tibetan Plateau, has moved the Gobi Desert into the focus of climate-historical basic research. Against this background, several German-Chinese expeditions to Ejina Basin (Inner Mongolia) and the Qilian Shan foreland were accomplished between 2011 and 2014. They were part of the BMBF joint program WTZ Central Asia - Monsoon Dynamics & Geo-Ecosystems (Grant No. 03G0814). In the course of these expeditions numerous surface samples from the entire catchment area of the Heihe (Black River) were collected for the determination of potential sediment sources. Additionally, two drillings in the interior of the Ejina Basin were conducted as a continuation of the existing drill-core D100 (see Wünnemann (2005)) and for gathering complementary information on landscape history and supra-regional sediment transfer. The goals of this doctoral thesis are a sedimentological-mineralogical characterization of the study area with regard to potential sediment sources and material fluxes of the Ejina Basin as well as the reconstruction of the sedimentation history of a 19 m sediment drill-core (GN100) drilled in the northern part of the basin. The main focus is on the clarification of the sediment provenance within the drill core as well as the designation of provenance signals and possible sediment sources or sediment transport paths. The methodological approach is based on a multi-proxy approach to characterize the clastic sedimentary facies using field observations, lithological-granulometric and mineralogical-geochemical analyses as well as statistical methods. For the mineralogical investigations of the sediments, a new scanning electron microscopic method for automated particle analysis was used and compared with traditional methods. The synoptic analysis of the granulometric, geochemical and mineralogical findings of the surface sediments result in a logical cascade model with recurring process areas and similar process signals. The results of the extensive granulometric analyses indicate decreasing grain sizes as the distance from the Qilian Shan increases and allow the identification of four textural signals: fluvial sands, dune sands, still water sediments and dusts. They can be used as the basis of interpretation for the grain size analyses of the drill core. This makes it possible to reconstruct the depositional history of the core sediments and to put them in an overall context in conjunction with own and literature-based datings. For the study area four depositional phases can be identified which date back until the time of the Last Glacial Maximum (LGM). During these depositional phases, various phases of activity and stability led to a continuous progradation and overprinting of the alluvial fan. A particularly active phase can be observed between 8 ka and 4 ka BP. During this period there seems to have been a significant increase in alluvial fan dynamics due to increasing fluvial activity. In the periods before and after mainly aeolian processes have led to an overprinting of the alluvial fan. Regarding the mineralogical provenance signals there is a great variability. This reflects the enormous geological heterogeneity of the study area, by which the spatial signals are not very pronounced. Nonetheless, within the catchment three larger areas can be declared which can be considered as possible sediment sources. These are the eastern and western foreland of the Qilian Shan mountains as wells as the Bei Shan in the west of the Ejina basin. They differ, in particular, from strongly diverging chlorite contents in the clay mineral and total mineral fraction. The eastern Qilian Shan foreland is characterized by significantly higher chlorite contents as the primary source for the sediments in the Ejina Basin. This is related to the greenschists, ophiolites and serpentinites in this area. Geochemically, the Cr/Rb-ratio in particular indicates a large variability within the catchment area. In this case its again the eastern Qilian Shan foreland which stands out from the rest of the study area with high values due to its high proportion of mafic rocks which are rich in chromites and spinels. Within the drill core sediments of GN100 the temporal but also the general variability of the sediment provenance according to the surface sediment results cannot be clearly traced. The mineralogical-sedimentological characteristics of the drilled clastic sediments exhibit meantime changes in sediment provenance. However, they are not as pronounced as the source signals within the surface sediments suggest. One reason seems to be the strong mixing of different sediments during transport. The combination of the particle size results with the results of the total and heavy mineralogy indicate that there must have been a phase in the meantime with predominantly aeolian processes.. These processes were connected with a sediment input from the Bei Shan mountains in the west. In addition to the increase in ultrastable heavy minerals such as zirconium and garnet and the decline of opaque heavy minerals, mainly present conditions point to this. The comparison of the traditional heavy mineral analysis (polarized light microscopy) with computer-controlled scanning electron microscopy (short: CCSEM) shows the clear advantage of the modern analysis method. Above all is the significant greater statistical significance of the counting results. In addition, this method can also be used to determine chemical varieties of some heavy minerals, which allows an even finer classification and more reliable conclusions about a possible sediment provenance. Furthermore, better statements can be made about the composition and the development process of the deposited sediments. This thesis shows that the sediment provenance within the study area as well as the ongoing processes partly depend strongly on local conditions. Therefore, the heterogeneity of the geology and the size of the catchment as well as the resulting complexity of the sediment genesis makes it very difficult to make exact assignments to clearly defined sediment sources. Nevertheless, the results indicate a primary input of fluvial clastic sediments of the Heihe coming from the Qilian Shan mountains. However, the findings also indicate the need to complement the study with adjacent study areas such as the Gobi Altai in the north or the Beishan in the west as well as a densification of the surface sampling for a better resolution of possible local sediment sources. KW - Heihe KW - Ejina Becken KW - Gaxun Nur KW - Schwerminerale KW - China KW - CCSEM KW - Herkunftsanalyse KW - Tonminerale KW - Heihe KW - Ejina Basin KW - Gaxun Nur KW - Heavy Minerals KW - China KW - CCSEM KW - Provenance Analysis KW - Clay Minerals Y1 - 2020 ER - TY - THES A1 - Schneider, Helen T1 - Reactive eutectic media based on ammonium formate for the valorization of bio-sourced materials T1 - Reaktive eutektische Medien auf Basis von Ammoniumformiat zur Aufwertung von biobasierten Substanzen N2 - In the last several decades eutectic mixtures of different compositions were successfully used as solvents for vast amount of chemical processes, and only relatively recently they were discovered to be widely spread in nature. As such they are discussed as a third liquid media of the living cell, that is composed of common cell metabolites. Such media may also incorporate water as a eutectic component in order to regulate properties such as enzyme activity or viscosity. Taking inspiration form such sophisticated use of eutectic mixtures, this thesis will explore the use of reactive eutectic media (REM) for organic synthesis. Such unconventional media are characterized by the reactivity of their components, which means that mixture may assume the role of the solvent as well as the reactant itself. The thesis focuses on novel REM based on ammonium formate and investigates their potential for the valorization of bio-sourced materials. The use of REM allows the performance of a number of solvent-free reactions, which entails the benefits of a superior atom and energy economy, higher yields and faster rates compared to reactions in solution. This is evident for the Maillard reaction between ammonium formate and various monosaccharides for the synthesis of substituted pyrazines as well as for a Leuckart type reaction between ammonium formate and levulinic acid for the synthesis of 5-methyl-2-pyrrolidone. Furthermore, reaction of ammonium formate with citric acid for the synthesis of yet undiscovered fluorophores, shows that synthesis in REM can open up unexpected reaction pathways. Another focus of the thesis is the study of water as a third component in the REM. As a result, the concept of two different dilution regimes (tertiary REM and in REM in solvent) appears useful for understanding the influence of water. It is shown that small amounts of water can be of great benefit for the reaction, by reducing viscosity and at the same time increasing reaction yields. REM based on ammonium formate and organic acids are employed for lignocellulosic biomass treatment. The thesis thereby introduces an alternative approach towards lignocellulosic biomass fractionation that promises a considerable process intensification by the simultaneous generation of cellulose and lignin as well as the production of value-added chemicals from REM components. The thesis investigates the generated cellulose and the pathway to nanocellulose generation and also includes the structural analysis of extracted lignin. Finally, the thesis investigates the potential of microwave heating to run chemical reactions in REM and describes the synergy between these two approaches. Microwave heating for chemical reactions and the use of eutectic mixtures as alternative reaction media are two research fields that are often described in the scope of green chemistry. The thesis will therefore also contain a closer inspection of this terminology and its greater goal of sustainability. N2 - Ein eutektisches System beschreibt eine homogene Mischung verschiedener Substanzen, welche bei einer einzigen Temperatur schmilzt und dabei einen Schmelzpunkt aufweist der unterhalb der Schmelzpunkte der einzelnen Komponenten liegt. Solche Gemische können aus simplen organischen Substanzen gebildet werden und haben deshalb in den letzten Jahrzehnten große Aufmerksamkeit als neuartige Lösungsmittel erhalten. Mittlerweile wird ihr Nutzung für eine Vielzahl chemischer Prozesse erforscht. Zudem wurde Entdeckt das solche Gemische auch in der Natur Verbreitung finden. In diesem Zuge werden sie z.B. als drittes flüssiges Medium der lebenden Zelle diskutiert, welches durch eutektische Gemische von gewöhnlichen Zellmetaboliten gebildet wird. Sie können dabei auch Wasser als eutektische Komponente enthalten, um Eigenschaften wie Enzymaktivität oder Viskosität zu regulieren. Inspiriert durch diesen raffinierten Einsatz eutektischer Gemische untersucht diese Arbeit die Verwendung reaktiver eutektischer Medien (REM) für die chemische Anwendung. Solche unkonventionellen Medien zeichnen sich durch die Reaktivität ihrer Komponenten aus, was bedeutet, dass das Gemisch sowohl die Rolle des Lösungsmittels als auch des Reaktanten selbst übernehmen kann. Die Arbeit konzentriert sich auf neuartige REM auf Basis von Ammoniumformiat und untersucht deren Potenzial für die Nutzung von bio-basierten Substanzen. Die Verwendung von REM ermöglicht die Durchführung einer Reihe lösungsmittelfreier Reaktionen, was im Vergleich zu Reaktionen in Lösung die Vorteile einer besseren Atomökonomie, höhere Ausbeuten und schnellere Reaktionsgeschwindigkeiten mit sich bringt. Dies zeigt sich an der Maillard-Reaktion zwischen Ammoniumformiat und verschiedenen Monosacchariden zur Synthese substituierter Pyrazine sowie an der Leuckart-Reaktion zwischen Ammoniumformiat und Lävulinsäure zur Synthese von 5-Methyl-2-pyrrolidon. Darüber hinaus zeigt die Reaktion von Ammoniumformiat mit Zitronensäure zur Synthese noch unentdeckter Fluorophore, dass die Synthese in REM bisher unerschlossene Reaktionswege eröffnen kann. Ein weiterer Schwerpunkt der Arbeit ist die Untersuchung von Wasser als dritte Komponente im REM. Daher erscheint das Konzept zweier unterschiedlicher Verdünnungsregime (tertiäres REM und REM im Lösungsmittel) nützlich für das Verständnis des Einflusses von Wasser. Es zeigt sich, dass kleine Mengen Wasser von großem Nutzen für die Reaktion sein können, indem sie die Viskosität senken und gleichzeitig die Reaktionsausbeuten erhöhen. Für den Aufschluss von Lignocellulose werden REM auf Basis von Ammoniumformiat und organischen Säuren eingesetzt. Die Arbeit stellt damit einen neuen Ansatz für das Konzept der Bioraffinerie vor, der eine erhebliche Prozessintensivierung durch die gleichzeitige Erzeugung von Cellulose, Lignin sowie die Herstellung von Chemikalien aus REM-Komponenten verspricht. Die Arbeit untersucht die erzeugte Cellulose, sowie die Bedingungen zur Erzeugung von Nanocellulose und umfasst die Strukturanalyse von extrahiertem Lignin. Abschließend untersucht die Arbeit das Potenzial der Mikrowellenenergie zum Erhitzen chemischer Reaktionen in REM und beschreibt die Synergie zwischen diesen beiden Ansätzen. Mikrowellentechnologie für chemische Reaktionen und die Verwendung eutektischer Gemische als alternative Reaktionsmedien sind zwei Forschungsfelder, die häufig im Rahmen der Grünen Chemie beschrieben werden. Die Arbeit beinhaltet daher auch eine genauere Betrachtung dieser Terminologie und ihres übergeordneten Ziels der Nachhaltigkeit. KW - solvent-free reactions KW - deep eutectic solvents KW - microwave synthesis KW - green chemistry KW - biorefinery KW - deoxyfructosazine KW - citrazinic acid KW - Bioraffinerie KW - Citrazinsäure KW - stark eutektisches Lösungsmittel KW - Deoxyfructosazin KW - Grüne Chemie KW - Mikrowellensynthese KW - lösungsmittelfreie Synthese Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613024 ER - TY - THES A1 - Scholz, Markus Reiner T1 - Spin polarization, circular dichroism, and robustness of topological surface states T1 - Spinpolarisation, Zirkulardichroismus und Robustheit Topologischer Oberflächenzustände BT - a photoemission study BT - eine Photoemissionsstudie N2 - Dreidimensionale topologische Isolatoren sind ein neues Materialsystem, welches dadurch charakterisiert ist, dass es in seinem Inneren isolierend an der Ober äche jedoch leitend ist. Ursächlich für die Leitfähigkeit an der Ober äche sind sogenannte topologische Ober- ächenzustände, welche das Valenzband des Inneren mit dem Leitungsband des Inneren verbinden. An der Ober äche ist also die Bandlücke, welche die isolierende Eigenschaft verursacht, geschlossen. Die vorliegende Arbeit untersucht diese Ober ächenzustände mittels spin- und winkelauf- gelöster Photoemissionsspektroskopie. Es wird gezeigt, dass in den Materialien Bi2Se3 und Bi2Te3, in übereinstimmung mit der Literatur, die entscheidenden Charakteristika eines topologischen Ober ächenzustands vorzu nden sind: Die Ober ächenzustände dieser Sys- teme durchqueren die Bandlücke in ungerader Anzahl, sie sind nicht entartet und weisen folgerichtig eine hohe Spinpolarisation auf. Weiterhin wird durch Aufdampfen diverser Adsorbate gezeigt, dass der Ober ächenzustän- de von Bi2Se3 und Bi2Te3, wie erwartet, extrem robust ist. Ober ächenzustände topologisch trivialer Systeme erfüllen diese Eigenschaft nicht; bereits kleine Verunreinigungen kön- nen diese Zustände zerstören, bzw. die Ober äche isolierend machen. Die topologischen Ober ächenzustände können in der vorliegenden Arbeit noch bis zur Detektionsgrenze der experimentellen Messmethode nachgewiesen werden und die Ober äche bleibt Leitfähig. Unter den Adsorbaten be ndet sich auch Eisen, ein bekanntermaßen magnetisches Materi- al. Eine der Grundvoraussetzungen für topologische Isolatoren ist die Zeitumkehrsymme- trie, die Elektronen, welche den topologischen Ober ächenzustand besetzen, vorschreibt, dass sie eine bestimmte Spinrichtung haben müssen, wenn sie sich beispielsweise nach links bewegen und den entgegengesetzten Spin wenn sie sich nach rechts bewegen. In magnetischen Materialien ist die Zeitumkehrsymmetrie jedoch explizit gebrochen und die gezeigte Robustheit des Ober ächenzustands gegen magnetische Materialien daher uner- wartet. Die Zeitumkehrsymmetrie sorgt auch dafür, dass eine Streuung der Elektronen um 180°, beispielsweise an einem Gitterdefekt oder an einem Phonon strikt verboten ist. Bei einem solchen Streuprozess bleibt die Spinrichtung erhalten, da aber in der Gegenrichtung nur Zustände mit entgegengesetztem Spin vorhanden sind kann das Elektron nicht in diese Richtung gestreut werden. Dieses Prinzip wird anhand der Lebensdauer der durch Pho- toemission angeregten Zustände untersucht. Hierbei wird gezeigt, dass die Kopplung der Elektronen des Ober ächenzustands von Bi2Te3 an Phononen unerwartet hoch ist und dass sich eine Anisotropie in der Bandstruktur des Selbigen auch in den Lebensdauern der ange- regten Zustände widerspiegelt. Weiterhin wird gezeigt, dass sich die Ein üsse von magne- tischen und nicht-magnetischen Verunreinigungen auf die Lebensdauern stark voneinander unterscheiden. Im letzten Teil der vorliegenden Arbeit wird untersucht, ob eine Asymmetrie in der Inten- sitätsverteilung der winkelaufgelösten Photoemissionsspektren, bei Anregung mit zirku- lar polarisiertem Licht, in Bi2Te3 Rückschlüsse auf die Spinpolarisation der Elektronen erlaubt. Bei Variation der Energie des eingestrahlten Lichts wird ein Vorzeichenwechsel der Asymmetrie beobachtet. Daraus lässt sich schlussfolgern, dass die Asymmetrie keine Rückschlüsse auf die Spinpolarisation erlaubt. N2 - This thesis is focussed on the electronic properties of the new material class named topological insulators. Spin and angle resolved photoelectron spectroscopy have been applied to reveal several unique properties of the surface state of these materials. The first part of this thesis introduces the methodical background of these quite established experimental techniques. In the following chapter, the theoretical concept of topological insulators is introduced. Starting from the prominent example of the quantum Hall effect, the application of topological invariants to classify material systems is illuminated. It is explained how, in presence of time reversal symmetry, which is broken in the quantum Hall phase, strong spin orbit coupling can drive a system into a topologically non trivial phase. The prediction of the spin quantum Hall effect in two dimensional insulators an the generalization to the three dimensional case of topological insulators is reviewed together with the first experimental realization of a three dimensional topological insulator in the Bi1-xSbx alloys given in the literature. The experimental part starts with the introduction of the Bi2X3 (X=Se, Te) family of materials. Recent theoretical predictions and experimental findings on the bulk and surface electronic structure of these materials are introduced in close discussion to our own experimental results. Furthermore, it is revealed, that the topological surface state of Bi2Te3 shares its orbital symmetry with the bulk valence band and the observation of a temperature induced shift of the chemical potential is to a high probability unmasked as a doping effect due to residual gas adsorption. The surface state of Bi2Te3 is found to be highly spin polarized with a polarization value of about 70% in a macroscopic area, while in Bi2Se3 the polarization appears reduced, not exceeding 50%. We, however, argue that the polarization is most likely only extrinsically limited in terms of the finite angular resolution and the lacking detectability of the out of plane component of the electron spin. A further argument is based on the reduced surface quality of the single crystals after cleavage and, for Bi2Se3 a sensitivity of the electronic structure to photon exposure. We probe the robustness of the topological surface state in Bi2X3 against surface impurities in Chapter 5. This robustness is provided through the protection by the time reversal symmetry. Silver, deposited on the (111) surface of Bi2Se3 leads to a strong electron doping but the surface state is observed up to a deposited Ag mass equivalent to one atomic monolayer. The opposite sign of doping, i.e., hole-like, is observed by exposing oxygen to Bi2Te3. But while the n-type shift of Ag on Bi2Se3 appears to be more or less rigid, O2 is lifting the Dirac point of the topological surface state in Bi2Te3 out of the valence band minimum at $\Gamma$. After increasing the oxygen dose further, it is possible to shift the Dirac point to the Fermi level, while the valence band stays well beyond. The effect is found reversible, by warming up the samples which is interpreted in terms of physisorption of O2. For magnetic impurities, i.e., Fe, we find a similar behavior as for the case of Ag in both Bi2Se3 and Bi2Te3. However, in that case the robustness is unexpected, since magnetic impurities are capable to break time reversal symmetry which should introduce a gap in the surface state at the Dirac point which in turn removes the protection. We argue, that the fact that the surface state shows no gap must be attributed to a missing magnetization of the Fe overlayer. In Bi2Te3 we are able to observe the surface state for deposited iron mass equivalents in the monolayer regime. Furthermore, we gain control over the sign of doping through the sample temperature during deposition. Chapter6 is devoted to the lifetime broadening of the photoemission signal from the topological surface states of Bi2Se3 and Bi2Te3. It is revealed that the hexagonal warping of the surface state in Bi2Te3 introduces an anisotropy for electrons traveling along the two distinct high symmetry directions of the surface Brillouin zone, i.e., $\Gamma$K and $\Gamma$M. We show that the phonon coupling strength to the surface electrons in Bi2Te3 is in nice agreement with the theoretical prediction but, nevertheless, higher than one may expect. We argue that the electron-phonon coupling is one of the main contributions to the decay of photoholes but the relatively small size of the Fermi surface limits the number of phonon modes that may scatter off electrons. This effect is manifested in the energy dependence of the imaginary part of the electron self energy of the surface state which shows a decay to higher binding energies in contrast to the monotonic increase proportional to E$^2$ in the Fermi liquid theory due to electron-electron interaction. Furthermore, the effect of the surface impurities of Chapter 5 on the quasiparticle life- times is investigated. We find that Fe impurities have a much stronger influence on the lifetimes as compared to Ag. Moreover, we find that the influence is stronger independently of the sign of the doping. We argue that this observation suggests a minor contribution of the warping on increased scattering rates in contrast to current belief. This is additionally confirmed by the observation that the scattering rates increase further with increasing silver amount while the doping stays constant and by the fact that clean Bi2Se3 and Bi2Te3 show very similar scattering rates regardless of the much stronger warping in Bi2Te3. In the last chapter we report on a strong circular dichroism in the angle distribution of the photoemission signal of the surface state of Bi2Te3. We show that the color pattern obtained by calculating the difference between photoemission intensities measured with opposite photon helicity reflects the pattern expected for the spin polarization. However, we find a strong influence on strength and even sign of the effect when varying the photon energy. The sign change is qualitatively confirmed by means of one-step photoemission calculations conducted by our collaborators from the LMU München, while the calculated spin polarization is found to be independent of the excitation energy. Experiment and theory together unambiguously uncover the dichroism in these systems as a final state effect and the question in the title of the chapter has to be negated: Circular dichroism in the angle distribution is not a new spin sensitive technique. KW - topological insulators KW - angle resolved photoelectron spectroscopy KW - spin resolved photoelectron spectroscopy KW - Bi2Se3 KW - Bi2Te3 KW - quasiparticle interactions KW - circular dichroism KW - spin-orbit coupling KW - time reversal symmetry KW - surface states KW - Spinpolarisation KW - Zirkulardichroismus KW - topologische Isolatoren KW - Oberflächenzustände KW - winkelaufgelöste Photoelektronenspektroskopie KW - spinaufgelöste Photoelektronenspektroskopie KW - Magnetismus KW - Bi2Te3 KW - Bi2Se3 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96686 ER - TY - THES A1 - Schröder, Birgit Eva T1 - Spatial and temporal dynamics of the terrestrial carbon cycle : assimilation of two decades of optical satellite data into a process-based global vegetation model T1 - Räumliche und zeitliche Dynamik des terrestrischen Kohlenstoffhaushaltes anhand der Assimilation von 20 Jahren optischer Satellitendaten in ein prozessbasiertes dynamisches globales Vegetationsmodell (DGVM) N2 - This PhD thesis presents the spatio-temporal distribution of terrestrial carbon fluxes for the time period of 1982 to 2002 simulated by a combination of the process-based dynamic global vegetation model LPJ and a 21-year time series of global AVHRR-fPAR data (fPAR – fraction of photosynthetically active radiation). Assimilation of the satellite data into the model allows improved simulations of carbon fluxes on global as well as on regional scales. As it is based on observed data and includes agricultural regions, the model combined with satellite data produces more realistic carbon fluxes of net primary production (NPP), soil respiration, carbon released by fire and the net land-atmosphere flux than the potential vegetation model. It also produces a good fit to the interannual variability of the CO2 growth rate. Compared to the original model, the model with satellite data constraint produces generally smaller carbon fluxes than the purely climate-based stand-alone simulation of potential natural vegetation, now comparing better to literature estimates. The lower net fluxes are a result of a combination of several effects: reduction in vegetation cover, consideration of human influence and agricultural areas, an improved seasonality, changes in vegetation distribution and species composition. This study presents a way to assess terrestrial carbon fluxes and elucidates the processes contributing to interannual variability of the terrestrial carbon exchange. Process-based terrestrial modelling and satellite-observed vegetation data are successfully combined to improve estimates of vegetation carbon fluxes and stocks. As net ecosystem exchange is the most interesting and most sensitive factor in carbon cycle modelling and highly uncertain, the presented results complementary contribute to the current knowledge, supporting the understanding of the terrestrial carbon budget. N2 - In der vorliegenden Arbeit wird anhand der Kombination eines dynamischen globalen Vegetationsmodells mit einer Zeitreihe von 21 Jahren optischer Satellitendaten eine realistische Abschätzung der terrestrischen Quellen und Senken von CO2 ermöglicht. Grundlage des hier vorgestellten neuen Modells stellt das dynamische globale Vegetationsmodell LPJ dar, ein prozessorientiertes Vegetationsmodell, das basierend auf ökophysiologischen Grundlagen die Vegetationsverteilung und -dynamik, Störungen (z.B. Feuer) und den Kohlenstoff- sowie den Wasserkreislauf modelliert. Die Kopplung des LPJ-DGVM erfolgte mit einer Zeitreihe globaler AVHRR-fPAR Daten (fPAR – Anteil photosynthetisch aktiver Strahlung), für den Zeitraum 1982 bis 2002 in einer räumlichen Auflösung von 0.5°. Als Ergebnis liegt nun eine globale raum-zeitliche Verteilung aller relevanten Kohlenstoffflüsse vor: Nettoprimärproduktion, Bodenrespiration, Nettoökosystemproduktion, durch Feuer und Ernte emittierter Kohlenstoff, sowie der in Biomasse und Boden gespeicherte Kohlenstoff. Verglichen mit dem Originalmodell haben sich durch die Einspeisung der Satellitendaten alle relevanten Kohlenstoffkomponenten verringert und zeigen nun bessere Übereinstimmung mit Literaturwerten. Die geringeren Kohlenstoffflüsse resultieren aus einer Kombination verschiedener Effekte: geringere Vegetationsbedeckung, Berücksichtigung der landwirtschaftlichen Nutzfläche, realistischere Abbildung der Saisonalität, Veränderung der Vegetationsverteilung und Verschiebung der Artenzusammensetzung. Die globalen Kohlenstoffflüsse werden mit dem vorgestellten Modell realistischer abgebildet als mit Ansätzen, die nur die potentiell natürliche Vegetation simulieren. Insbesondere die Quellen- und Senkendynamik unterliegt vielfältigen Prozessen, die mit einem Modell, dass auch die Bodenrespiration prozessorientiert berücksichtigt, verlässlich geschätzt wird. KW - Vegetationsmodell KW - Kohlenstoffmodell KW - DGVM KW - LPJ KW - Kohlenstoffhaushalt KW - vegetation model KW - carbon cycle KW - DGVM KW - LPJ KW - global change Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17596 ER - TY - THES A1 - Schulte-Osseili, Christine T1 - Vom Monomer zum Glykopolymer T1 - From monomer to glycopolymer BT - Anwendung als Biofunktionalitäten auf Oberflächen und als Transportmoleküle BT - application as biofunctionalized surfaces and transport molecules N2 - Glykopolymere sind synthetische und natürlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich für viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen ermöglicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kostengünstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden über ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in wässriger Lösung untersucht. Die Polymere formten in wässriger Lösung Mizellen, bei denen der Zuckerblock an der Oberfläche der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberflächenbeschichtung über „Grafting from“ mit SI-ATRP oder über „Grafting to“ auf verschiedene Oberflächen gebunden. Durch die glykopolymerbschichteten Oberflächen konnte die Glykan Protein Wechselwirkung über spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsstärke untersucht. Die synthetisierten Glykopolymere könnten durch Austausch der Glykaneinheit für andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die bioverträglichen Glykopolymere wären alternativen für den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den Körper. Außerdem könnten die funktionalisierten Oberflächen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, könnten als antiadsorptive Oberflächenbeschichtung z.B. in der Zellbiologie eingesetzt werden. N2 - Glycopolymers are synthetic and naturally occurring polymers that carry a gylcan unit in the side chain of the polymer. Glycans are responsible for many biological processes due to the glycn-protein interaction. The involvement of glcans in these biological processes enables the imitation and analysis of interactions by suitable model coumponds, e.g. glycopolymers. This system of glycan-protein interaction will be investigated and studied by glycopolymers in order to demonstrate the specific and selective binding of proteins to glycopolymers. The proteins that are able to selectively bind carbohydrate structures are called lectins. In this dissertation different glycopolymers were synthesized. Care should be taken to ensure an effficient and cost-effective synthesis route. Different glycopolymers were produced by functionalized monomers with different sugars, such as mannose, lactose, galactose or N-acetyl-glucosamine as functional group. From these functionalized glycomonomers, glycopolymers were synthesized via ATRP and RAFT polymerization. The glycopolymers obtained were used as hydrophilic blocks in diblock copolymers and self-assembly in aqueous solution was investigated. In aqueoussolution, the polymers formed micelles in which the sugar block sits on the surface of the micelles. The micelles were loaded with a hydrophobic fluorescent dxe, which made it possible to determine the CMC of micelle formation. In additiom, the glycopolymers were bound to various surfaces as surface coatings via “grafting from” with SI-ATRP or via “grafting to”. Through the glycopolymer-coated surfaces, the glycan-protein interaction could be investigated by spectroscpic measurement methods such as SPR and microring resonators. The specific and selective binding of lectins to the glycopolymers was detected and the binding strength was investigated. The synthesised glycopolymers could become adressable for other lectins by exchanging the glycan unit and thus open up a broad field of other proteins. The biocompatible glycopolymers would be an alternative for use in iological processes as transporters of drugs or dyes into the body. In addtion, the functionalised surfaces could be used in diagnostics for regognition of lectins. The glycan, which do nit bind selectively and specifically to proetins, could be used as anit-adsoptive surface coatings, e.g. in cell biology. KW - Glykopolymere KW - Polymerisation KW - Oberflächenbeschichtung KW - Lektine KW - Glykan-Protein-Wechselwirkung KW - glycopolymers KW - polymerization KW - surface modification KW - lectins KW - glycan-protein interaction Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432169 ER - TY - THES A1 - Schulze, Nicole T1 - Neue Templatphasen zur anisotropen Goldnanopartikelherstellung durch den Einsatz strukturbildender Polymere T1 - New template phases for anisotropic gold nanoparticle production through the use of structure-forming polymers N2 - Ziel der vorliegenden Arbeit war die Synthese und Charakterisierung von anisotropen Goldnanopartikeln in einer geeigneten Polyelektrolyt-modifizierten Templatphase. Der Mittelpunkt bildet dabei die Auswahl einer geeigneten Templatphase, zur Synthese von einheitlichen und reproduzierbaren anisotropen Goldnanopartikeln mit den daraus resultierenden besonderen Eigenschaften. Bei der Synthese der anisotropen Goldnanopartikeln lag der Fokus in der Verwendung von Vesikeln als Templatphase, wobei hier der Einfluss unterschiedlicher strukturbildender Polymere (stark alternierende Maleamid-Copolymere PalH, PalPh, PalPhCarb und PalPhBisCarb mit verschiedener Konformation) und Tenside (SDS, AOT – anionische Tenside) bei verschiedenen Synthese- und Abtrennungsbedingungen untersucht werden sollte. Im ersten Teil der Arbeit konnte gezeigt werden, dass PalPhBisCarb bei einem pH-Wert von 9 die Bedingungen eines Röhrenbildners für eine morphologische Transformation von einer vesikulären Phase in eine röhrenförmige Netzwerkstruktur erfüllt und somit als Templatphase zur formgesteuerten Bildung von Nanopartikeln genutzt werden kann. Im zweiten Teil der Arbeit wurde dargelegt, dass die Templatphase PalPhBisCarb (pH-Wert von 9, Konzentration von 0,01 wt.%) mit AOT als Tensid und PL90G als Phospholipid (im Verhältnis 1:1) die effektivste Wahl einer Templatphase für die Bildung von anisotropen Strukturen in einem einstufigen Prozess darstellt. Bei einer konstanten Synthesetemperatur von 45 °C wurden die besten Ergebnisse bei einer Goldchloridkonzentration von 2 mM, einem Gold-Templat-Verhältnis von 3:1 und einer Synthesezeit von 30 Minuten erzielt. Ausbeute an anisotropen Strukturen lag bei 52 % (Anteil an dreieckigen Nanoplättchen von 19 %). Durch Erhöhung der Synthesetemperatur konnte die Ausbeute auf 56 % (29 %) erhöht werden. Im dritten Teil konnte durch zeitabhängige Untersuchungen gezeigt werden, dass bei Vorhandensein von PalPhBisCarb die Bildung der energetisch nicht bevorzugten Plättchen-Strukturen bei Raumtemperatur initiiert wird und bei 45 °C ein Optimum annimmt. Kintetische Untersuchungen haben gezeigt, dass die Bildung dreieckiger Nanoplättchen bei schrittweiser Zugabe der Goldchlorid-Präkursorlösung zur PalPhBisCarb enthaltenden Templatphase durch die Dosierrate der vesikulären Templatphase gesteuert werden kann. In umgekehrter Weise findet bei Zugabe der Templatphase zur Goldchlorid-Präkursorlösung bei 45 °C ein ähnlicher, kinetisch gesteuerter Prozess der Bildung von Nanodreiecken statt mit einer maximalen Ausbeute dreieckigen Nanoplättchen von 29 %. Im letzten Kapitel erfolgten erste Versuche zur Abtrennung dreieckiger Nanoplättchen von den übrigen Geometrien der gemischten Nanopartikellösung mittels tensidinduzierter Verarmungsfällung. Bei Verwendung von AOT mit einer Konzentration von 0,015 M wurde eine Ausbeute an Nanoplättchen von 99 %, wovon 72 % dreieckiger Geometrien hatten, erreicht. N2 - The aim of the present work was the synthesis and characterization of anisotropic gold nanoparticles in a suitable polyelectrolyte-modified template phase. The focus was on the selection of a suitable template phase for the synthesis of uniform and reproducible anisotropic gold nanoparticles with the resulting special properties. In the synthesis of the anisotropic gold nanoparticles, the focus was on the use of vesicles as a template phase. Here, the influence of different structure-forming polymers (strongly alternating maleimide copolymers PalH, PalPh, PalPhCarb and PalPhBisCarb with different conformations) and surfactants (SDS, AOT - anionic surfactants) should be studied at various synthesis and separation conditions. In the first part of the work, it could be shown that PalPhBisCarb at pH 9 meets the requirements of a tubulating agent for a morphological transformation of a vesicular phase into a tubular network structure and thus can be used as a template phase for the shape-controlled formation of nanoparticles. In the second part of the work, it was shown that the template phase PalPhBisCarb (pH value of 9, concentration of 0.01 wt.%) with AOT as surfactant and PL90G as phospholipid (in the ratio 1:1) is the most effective choice of template phase for the formation of anisotropic structures in a one-step process. At a constant synthesis temperature of 45 °C, the best results were achieved with a gold chloride concentration of 2 mM, a gold-template ratio of 3:1 and a synthesis time of 30 minutes. The yield of anisotropic structures was 52% (triangular nanoplatelet content of 19%). By increasing the synthesis temperature, the yield could be increased to 56% (29%). In the third part, it was shown by time-dependent investigations that in the presence of PalPhBisCarb, the formation of the not energetically preferred platelet structures is initiated at room temperature and assumes an optimum at 45 °C. Kinetical studies have shown that the formation of triangular nanosheets can be controlled by the dosing rate of the vesicular template phase when the gold chloride precursor solution is gradually added to the PalPhBisCarb-containing template phase. Conversely, upon addition of the template phase to the gold chloride precursor solution at 45 °C, a similar, kinetically controlled process of formation of nanodimers takes place with a maximum yield of triangular nanoplatelets of 29%. In the last chapter, initial attempts were made to separate triangular nanoplatelets from the other geometries of the mixed nanoparticle solution by means of surfactant-induced depletion flocculation. When AOT was used at a concentration of 0.015 M, a yield of nanoplatelets of 99%, of which 72% had triangular geometries, was achieved. KW - Nanopartikel KW - nanoparticle KW - Templatphase KW - template phase KW - Gold KW - gold KW - anisotrop KW - anisotropic Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-409515 ER - TY - THES A1 - Schutjajew, Konstantin T1 - Electrochemical sodium storage in non-graphitizing carbons - insights into mechanisms and synthetic approaches towards high-energy density materials T1 - Elektrochemische Natriumspeicherung in nicht-graphitisierbaren Kohlenstoffen - Untersuchungen zu Mechanismen und synthetische Ansätze für die Darstellung von Materialien mit hohen Energiedichten N2 - To achieve a sustainable energy economy, it is necessary to turn back on the combustion of fossil fuels as a means of energy production and switch to renewable sources. However, their temporal availability does not match societal consumption needs, meaning that renewably generated energy must be stored in its main generation times and allocated during peak consumption periods. Electrochemical energy storage (EES) in general is well suited due to its infrastructural independence and scalability. The lithium ion battery (LIB) takes a special place, among EES systems due to its energy density and efficiency, but the scarcity and uneven geological occurrence of minerals and ores vital for many cell components, and hence the high and fluctuating costs will decelerate its further distribution. The sodium ion battery (SIB) is a promising successor to LIB technology, as the fundamental setup and cell chemistry is similar in the two systems. Yet, the most widespread negative electrode material in LIBs, graphite, cannot be used in SIBs, as it cannot store sufficient amounts of sodium at reasonable potentials. Hence, another carbon allotrope, non-graphitizing or hard carbon (HC) is used in SIBs. This material consists of turbostratically disordered, curved graphene layers, forming regions of graphitic stacking and zones of deviating layers, so-called internal or closed pores. The structural features of HC have a substantial impact of the charge-potential curve exhibited by the carbon when it is used as the negative electrode in an SIB. At defects and edges an adsorption-like mechanism of sodium storage is prevalent, causing a sloping voltage curve, ill-suited for the practical application in SIBs, whereas a constant voltage plateau of relatively high capacities is found immediately after the sloping region, which recent research attributed to the deposition of quasimetallic sodium into the closed pores of HC. Literature on the general mechanism of sodium storage in HCs and especially the role of the closed pore is abundant, but the influence of the pore geometry and chemical nature of the HC on the low-potential sodium deposition is yet in an early stage. Therefore, the scope of this thesis is to investigate these relationships using suitable synthetic and characterization methods. Materials of precisely known morphology, porosity, and chemical structure are prepared in clear distinction to commonly obtained ones and their impact on the sodium storage characteristics is observed. Electrochemical impedance spectroscopy in combination with distribution of relaxation times analysis is further established as a technique to study the sodium storage process, in addition to classical direct current techniques, and an equivalent circuit model is proposed to qualitatively describe the HC sodiation mechanism, based on the recorded data. The obtained knowledge is used to develop a method for the preparation of closed porous and non-porous materials from open porous ones, proving not only the necessity of closed pores for efficient sodium storage, but also providing a method for effective pore closure and hence the increase of the sodium storage capacity and efficiency of carbon materials. The insights obtained and methods developed within this work hence not only contribute to the better understanding of the sodium storage mechanism in carbon materials of SIBs, but can also serve as guidance for the design of efficient electrode materials. N2 - Eine nachhaltige Energiewirtschaft kann nur durch die Abkehr von fossilen Brennstoffen als Energiequellen und den ausschließlichen Einsatz erneuerbarer Quellen für die Energieerzeugung erreicht werden. Da diese jedoch naturgemäß nur diskontinuierlich zur Verfügung stehen und sich die tageszeitliche Verfügbarkeit kaum mit dem Bedarf deckt, muss erneuerbar gewonnene Energie zwischengespeichert werden. Dies kann mittels elektrochemischer Energiespeicher geschehen, wobei sich die Lithium-Ionen-Batterie (LIB) aufgrund ihrer hohen Energiedichte und Effizienz besonders dafür eignet. Da jedoch Ressourcen, welche für entscheidende Zellkomponenten der LIB benötigt werden, knapper werden und oft in geopolitisch komplizierten Regionen vorkommen, muss auch dafür eine Alternative gefunden werden. Die Natrium-Ionen-Batterie (NIB) bietet sich als Nachfolger für LIBs an, da sich die Zellchemie der beiden Systeme ähnelt und somit Kenntnisse direkt aus der LIB-Forschung übernommen werden können. Es erweist sich allerdings als problematisch, dass das kommerziell wichtigste negative Elektrodenmaterial in LIBs, Graphit, nicht für die Anwendung in NIBs eignet und daher eine andere Kohlenstoffmodifikation, sogenannter nicht-graphitisierbarer Kohlenstoff, oder aus dem Englischen hard carbon (HC), verwendet werden muss. HC ist durch eine besondere Art der Fehlordnung geprägt und besteht im Wesentlichen aus Regionen, in denen die Kohlenstoffschichten parallel zueinander verlaufen und aus Regionen, in denen die Schichten innere Hohlräume, sogenannte geschlossene Poren bilden. Die Lade-Entladekurve von HCs ist geprägt von diesen Strukturmerkmalen, sodass sie in einen linear-abflachenden, aus dem Englischen sloping Bereich, und einen Plateaubereich unterteilt werden kann. Die Speicherung im für Energieanwendungen relevanteren Plateaubereich erfolgt durch Abscheidung quasimetallischer Natriumstrukturen in eingangs erwähnten geschlossenen Poren, bei geringen, konstanten Spannungen, wie zahlreiche Forschungsarbeiten unter Berufung auf verschiedene Strukturcharakterisierungsmethoden � uberzeugend nahelegen. Jedoch ist über den Einfluss der Größe und Form der geschlossenen Poren sowie derer chemischer Eigenschaften auf die Natriumspeicherung nur wenig bekannt. Eben diese Fragestellung soll in der vorliegenden Arbeit behandelt werden. Durch die Herstellung von Materialien mit genau definierter und bekannter Morphologie, Porenstruktur sowie chemischer Beschaffenheit wird die Bedeutung dieser Merkmale für die Natriumabscheidung bei geringen Potentialen beleuchtet. Mittels elektrochemischer Impedanzspektroskopie wird desweiteren der Natriumspeichermechanismus detailliert untersucht und die Kinetik der reversiblen Natriumspeicherung mit der der irreversiblen Metallabscheidung verglichen, wobei eine bemerkenswerte Ähnlichkeit der beiden Prozesse zu beobachten ist. Abschließend ist die gezielte Herstellung geschlossenporiger Materialien aus offenporigen Vorläufermaterialien gelungen, welche es nicht nur ermöglicht, geschlossen- und offenporige Materialien ansonsten gleicher Porenstruktur zu vergleichen und die Notwendigkeit geschlossener Poren nachzuweisen, sondern auch die Speicherkapazität und Effizienz der Elektrodenmaterialien zu erhöhen. Insgesamt tragen die im Rahmen der vorliegenden Dissertation gewonnenen Erkenntisse nicht nur zum tiefergehenden Verständnis des Natriumspeichermechanismus in HCs bei, sondern es werden auch synthetische und analytische Methoden vorgestellt, die der weiteren Forschung auf diesem Gebiet dienen werden. KW - sodium-ion batteries KW - energy storage KW - carbon KW - Natrium-Ionen-Akkumulator KW - Energiespeicher KW - Kohlenstoff Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-541894 ER -