TY - THES A1 - Prevot, Michelle Elizabeth T1 - Introduction of a thermo-sensitive non-polar species into polyelectrolyte multilayer capsules for drug delivery T1 - Einbettung unpolarer, temperaturempfindlicher Substanzen in Polyelektrolytkapselsysteme zur Wirkstofffreisetzung N2 - The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest. N2 - Verkapselung ist ein vielseitiges Werkzeug, das zum Schutz und zum Transport von Molekülen ebenso eingesetzt werden kann, wie zur Verbindung von Reaktionspartnern in einem gemeinsamen, von der Umgebung abgeschirmten Raum. Es basiert auf einem einfachen Vorbild der Natur. Pflanzen schützen ihren Samen zum Beispiel durch eine harte, nahezu undurchdringbare Schale (Nüsse) oder durch eine selektiv durchlässige Hülle, wie bei Weizen, der sobald er feucht wird zu keimen beginnt. Die Natur setzt durch den Einsatz des Hülle-Kern Prinzips sehr effizient die Kontrolle über Durchlässigkeit und Anpassung an bestimmte Aufgaben um. Wird das Hülle-Kern-Prinzip zum Schutz oder Transport von Molekülen eingesetzt, so sind die zu verwendenden Kapseln nur wenige Mikrometer groß. Sie werden dann als Mikrokapseln bezeichnet. Zur Erzeugung dieser Mikrokapseln werden verschiedene Methoden verwendet. Der heute übliche Weg geht von einer ca. 5-10 Mikrometer großen Kugel (Kern) aus, die mit einer stabilen und an die gewünschten Eigenschaften angepassten Schicht von wenigen Nanometern versehen wird. Im Anschluss wird der Kern herausgelöst und eine hohle, stabile Kapsel erhalten. Schichten von wenigen Nanometern Dicke können aus Polyelektrolyten durch das Layer-by-Layer-Verfahren (LbL) hergestellt werden. Dieses Verfahren eignet sich auf Grund seiner vielen Anpassungsmöglichkeiten besonders zum Aufbau der Schichten für Mikrokapseln, da sich die Eigenschaften der Beschichtung bereits beim Aufbau der Schicht auf die Bedürfnisse maßschneidern lassen. Diese Arbeit befasst sich mit der Erzeugung von Mikrokapseln, deren Eigenschaften temperaturabhängig sind. Dies wurde auf zwei Wegen erreicht. Zum einen wurden Kapseln aus Polyelektrolyten und Wachs aufgebaut. Bei Temperaturerhöhung schmilzt das Wachs und versiegelt die Kapsel. Zum anderen werden Kapseln mit einem Wärme empfindlichen Polymer gefüllt. Bei Temperaturerhöhung kollabiert das Polymergerüst. Der enthaltene Wirkstoff wird freigesetzt. KW - Mikrokapsel KW - Polyelektrolyt KW - Mehrschichtsysteme KW - Polyelectrolyte KW - Multilayers KW - Capsule Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7785 ER - TY - CHAP ED - Kurths, Jürgen ED - Fradkov, Alexander ED - Chen, Guanrong T1 - The 3rd international IEEE scientific conference on physics and control (PhysCon 2007) : September 3rd-7th 2007 at the University of Potsdam N2 - During the last few years there was a tremendous growth of scientific activities in the fields related to both Physics and Control theory: nonlinear dynamics, micro- and nanotechnologies, self-organization and complexity, etc. New horizons were opened and new exciting applications emerged. Experts with different backgrounds starting to work together need more opportunities for information exchange to improve mutual understanding and cooperation. The Conference "Physics and Control 2007" is the third international conference focusing on the borderland between Physics and Control with emphasis on both theory and applications. With its 2007 address at Potsdam, Germany, the conference is located for the first time outside of Russia. The major goal of the Conference is to bring together researchers from different scientific communities and to gain some general and unified perspectives in the studies of controlled systems in physics, engineering, chemistry, biology and other natural sciences. We hope that the Conference helps experts in control theory to get acquainted with new interesting problems, and helps experts in physics and related fields to know more about ideas and tools from the modern control theory. KW - nonlinear dynamics KW - micro- and nanotechnologies KW - self-organization KW - complexity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15228 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Ott, Christian David T1 - Stellar iron core collapse in {3+1} general relativity and the gravitational wave signature of core-collapse supernovae T1 - Stellarer Eisenkernkollaps in Allgemeiner Relativitätstheorie und die Gravitationswellensignatur von Kern-Kollaps-Supernovae N2 - I perform and analyse the first ever calculations of rotating stellar iron core collapse in {3+1} general relativity that start out with presupernova models from stellar evolutionary calculations and include a microphysical finite-temperature nuclear equation of state, an approximate scheme for electron capture during collapse and neutrino pressure effects. Based on the results of these calculations, I obtain the to-date most realistic estimates for the gravitational wave signal from collapse, bounce and the early postbounce phase of core collapse supernovae. I supplement my {3+1} GR hydrodynamic simulations with 2D Newtonian neutrino radiation-hydrodynamic supernova calculations focussing on (1) the late postbounce gravitational wave emission owing to convective overturn, anisotropic neutrino emission and protoneutron star pulsations, and (2) on the gravitational wave signature of accretion-induced collapse of white dwarfs to neutron stars. N2 - Ich präsentiere die ersten Computer-Simulationen des rotierenden Kollapses stellarer Eisenkerne, die in der {3+1}-Zerlegung der Allgemeinen Relativitätstheorie durchgeführt werden und Vorsupernova-Sternmodelle aus Sternentwicklungsrechnungen, eine heiße nukleare Zustandsgleichung und ein näherungsweises Verfahren zur Beschreibung des Elektroneneinfangs enthalten und Neutrinodruck-Effekte berücksichtigen. Basierend auf den Ergebnissen dieser Rechnungen erhalte ich die zur Zeit realistischsten Vorhersagen für das Gravitationswellensignal der Kollaps, Abprall, Abkling und frühen Nach-Abprallphase einer Kern-Kollaps-Supernova. Neben den {3+1} Simulationen diskutiere ich newtonsche axisymmetrische Kern-Kollaps-Supernova-Simulationen mit Schwerpunkten auf: (1) der Gravitationswellenabstrahlung in der späten Nach-Abprallphase durch Konvektionsströmungen, anisotropische Neutrinoemission und Proto-Neutronenstern Pulsationen und (2) der Gravitationswellensignatur des Kollapses weißer Zwergsterne zu Neutronensternen, der durch Akkretion eingeleitet wird. KW - Gravitationswellen KW - Kern-Kollaps-Supernovae KW - Allgemeine Relativitätstheorie KW - Gravitational Waves KW - Core-Collapse Supernovae KW - General Relativity Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12986 ER - TY - CHAP A1 - Votruba, V. A1 - Feldmeier, Achim A1 - Kubát, Jiří A1 - Rätzel, D. T1 - Multicomponent stellar wind of hot stars N2 - We developed a time-dependent multicomponent hydrodynamical code for simulation of the stellar wind from hot stars and applied it to stars with high and low density winds. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17677 ER - TY - CHAP A1 - Kusterer, D.-J. A1 - Nagel, T. A1 - Werner, K. A1 - Feldmeier, Achim T1 - Radiative transfer in CV disk winds N2 - Mass accretion onto compact objects through accretion disks is a common phenomenon in the universe. It is seen in all energy domains from active galactic nuclei through cataclysmic variables (CVs) to young stellar objects. Because CVs are fairly easy to observe, they provide an ideal opportunity to study accretion disks in great detail and thus help us to understand accretion also in other energy ranges. Mass accretion in these objects is often accompanied by mass outflow from the disks. This accretion disk wind, at least in CVs, is thought to be radiatively driven, similar to O star winds. WOMPAT, a 3-D Monte Carlo radiative transfer code for accretion disk winds of CVs is presented. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17847 ER - TY - GEN A1 - Allefeld, Carsten A1 - Frisch, Stefan A1 - Schlesewsky, Matthias T1 - Detection of early cognitive processing by event-related phase synchronization analysis N2 - In order to investigate the temporal characteristics of cognitive processing, we apply multivariate phase synchronization analysis to event-related potentials. The experimental design combines a semantic incongruity in a sentence context with a physical mismatch (color change). In the ERP average, these result in an N400 component and a P300-like positivity, respectively. The synchronization analysis shows an effect of global desynchronization in the theta band around 288ms after stimulus presentation for the semantic incongruity, while the physical mismatch elicits an increase of global synchronization in the alpha band around 204ms. Both of these effects clearly precede those in the ERP average. Moreover, the delay between synchronization effect and ERP component correlates with the complexity of the cognitive processes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 074 KW - phase synchronization KW - coherence KW - semantic incongruity KW - color change KW - N400 KW - P300 KW - theta KW - alpha Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-20126 ER -