TY - THES A1 - Kim, Jiyong T1 - Synthesis of InP quantum dots and their applications N2 - Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD–LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III–V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis–mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III–V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically. N2 - Umweltfreundliche InP Quantenpunkte (QDs) sind technologisch relevant und werden typischerweise als grüne und rote Emitter in Bildschirmen verwendet. Nach dem Stand der Technik kann eine sorgfältig hergestellte Kern-Schale-Heterostruktur (ZnSe innen/ZnS außen) zu außergewöhnlich hohen Photolumineszenz-Quantenausbeuten (PL-QYs) von nahezu Eins (95 - 100 %) führen. Dennoch gibt es bisher nur einige wenige industrielle Anwendungen wie QD-Flüssigkristall-Bildschirme (liquid crystal display, QD-LCD), in denen die Anregung durch eine blaue Hintergrundbeleuchtung realisiert wird. Dabei haben QDs aufgrund ihrer Modifizierbarkeit noch viele weitere industrielle Einsatzmöglichkeiten, beispielsweise QD basierte lichtemittierende Dioden (QD-LEDs) und lumineszierende Solarkollektoren (luminescence solar concentrator, LSC). Vor dem Hauptteil werden in den Kapiteln 1 und 2 die Grundlagen von QDs und die theoretischen Grundlagen basierend auf quantenmechanischer Beschreibung und experimentellen Ergebnissen eingeführt. Zum besseren Verständnis werden: das Konzept der QDs, kolloidale QDs, Kern-Schale-Strukturen vom Typ I, mit Übergangsmetallen dotierte Halbleiter-QDs, die Oberflächenchemie von QDs und ihre Anwendungen (LSC, QD-LEDs und electrohydrodynamic EHD-Jet-Printing), nacheinander eingeführt. Der Schwerpunkt dieser Doktorarbeit liegt hauptsächlich auf der Kombination von QD-Materialien und QD-Bauelementen, basierend auf der Synthese von InP QDs mit einem anorganischen Kern (Kern-Schale-Heterostruktur) und einer organischen Hülle (Oberflächenliganden auf der QD-Oberfläche). In die Kern-Schale-Heterostruktur wird eine ZnCuInS-Mittelschale als Zwischenschicht zwischen einem Cu-dotierten InP Kern und einer ZnS-Schale für LSC-Bauelemente neu eingeführt. Bei den Oberflächenliganden wird der Ligandeneffekt von 1-Oktanthiol und Chloridionen auf die Stabilität von QD-LEDs und die Druckbarkeit mit EHD-Jet-Printing hin untersucht. Dabei erhält der Protonentransfermechanismus auf der QD-Oberfläche ein besonderes Augenmerk. In Kapitel 3 wird die Eintopfsynthese von hocheffizient emittierenden QDs mit einer Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS Kern/Schale/Schale-Heterostruktur beschrieben. Wenn diese neuartige Kombination einer ZCIS/ZnS-Doppelschalenstruktur mit eine Reihe von Cu:InP-Kerne mit unterschiedlichen Größen kombiniert wird, ergeben die daraus entstehenden Cu:InP/ZCIS/ZnS-QDs die bisher höchsten publizierten PL-QYs von 71,5 – 82,4 % im nahen IR-Bereich von 694 – 850 nm mit einstellbarer PL Wellenlänge. Diese Ergebnisse weisen auf die Wirksamkeit der ZCIS-Zwischenschicht hin, welche die Grenzflächenspannung zwischen Kern und Schale effektiv mildert und damit zu einem solch hohen Emissionsvermögen führt. Diese ZCIS-Zwischenschicht wird durch vergleichende Größen-, Struktur- und Zusammensetzungsanalysen weiter untersucht. Am Ende des Kapitels wird der aktuellen Stand der Forschung auf dem Gebiet der LSC-Bauelemente aus solchen Cu:InP/ZCIS/ZnS-QDs vorgestellt. Kapitel 4 befasst sich hauptsächlich mit dem Ligandeneffekt bei der Passivierung mit 1-Oktanthiol von InP/ZnSe/ZnS-QDs im Hinblick auf die unvollständige Oberflächenpassivierung während der Synthese. Es fehlen anionischen Carboxylat-Liganden auf der InP/ZnSe/ZnS-Oberfläche der QDs, an denen Zink Carboxylat Liganden durch Protonentransfer vom 1-Oktanthiol in Carbonsäure-Liganden umgewandelt werden könnten. Die so synthetisierten QDs haben zunächst eine unterkoordinierte Oberfläche mit Leerstellen, die durch Lösungsmittel-Liganden wie Ethanol oder Aceton passiviert werden. Wenn 1-Octanthiol an die QD-Oberfläche bindet bewirkt der Protonentransfer die Bindung von Carboxylat-Liganden (aus Zink-Carboxylat) an die Oberfläche, wobei Ethanol- oder Aceton-Liganden ausgetauscht werden. Systematische Analysen wie Thermogravimetrie (thermogravimetric analysis TGA), Massenspektrometrie (MS) und Protonen-Kernmagnetresonanz (proton nuclear magnetic resonance 1H-NMR) zeigen direkt den Zusammenhang zwischen Oberflächenliganden und QD-LEDs. Kapitel 5 zeigt den Zusammenhang zwischen der Materialstabilität von QDs und der Bauteilstabilität von QD-LEDs durch Untersuchung der Oberflächenchemie und der Schalendicke. In typischen kolloidalen III-V-InP-QDs wird eine anorganische ZnS-Außenhülle auf den InP Kern aufgetragen, um Stabilität zu gewährleisten. In dieser Arbeit wird jedoch eine schnellere Photodegradation von InP/ZnSe/ZnS-QDs mit einer dickeren statt einer dünneren ZnS-Schale gezeigt, wenn 1-Oktanthiol als Schwefelquelle zur Bildung der äußersten ZnS-Schale verwendet wurde. 1-Oktanthiol induziert die Bildung eines schwach gebundenen Carboxylatliganden durch Protonentransfer auf der QD-Oberfläche, was zu einem schnelleren Abbau unter UV-Licht trotz dickerer ZnS-Schale führt. Detailliertere Einblicke in die Oberflächenchemie werden durch 1H-NMR, TGA und MS gewonnen. Überraschenderweise zeigen jedoch die Lebensdauern der aus InP/ZnSe/ZnS-QDs mit dicken oder dünnen ZnS-Hüllen hergestellten EL-Bauelemente eine gegenteilige Stabilität: Die QD-LEDs mit QDs mit dicker ZnS-Hülle haben eine längere Lebensdauer, als jene mit dünner ZnS-Hülle. Es wird der Degradationsmechanismus der QDs und der QD-Leuchtdioden anhand der Ergebnisse erläutert und der Effekt auf die unterschiedlichen Lebensdauern von Material und Bauteil diskutiert. In Kapitel 6 wird eine Methode vorgeschlagen, wie die Druckbarkeit von QD-Tintenformulierungen beim EHD-Jet-Druck über die QD-Materialien verbessert werden kann. Dazu werden InP-QDs mit GaP-Zwischenschalen erweitert, um die Oberflächenladung zu beeinflussen. Darüber hinaus verbessern GaP-Zwischenschalen in III-V kolloidalen InP-QDs deren thermische Stabilität und PL-QY im Falle von Typ-I-Kern/Schale/Schale-Heterostrukturen (InP/GaP/ZnSeS-QDs). Diese stark lumineszierenden InP/GaP/ZnSeS-QDs wurden synthetisiert und für den EHD-Jet-Druck verwendet. Nicht umgesetzte Ga und Cl-Ionen auf der QD-Oberfläche reduzieren die benötigte Betriebsspannung zur Ausbildung eines Taylor-Kegels und eines stabilen Tinten-Jets. Dieses Ergebnis deutet darauf hin, dass die Oberflächenladungen der Quantenpunkte eine wichtige Rolle bei der Ausbildung des Taylor-Kegels spielen. Mittels Zeta-Potenzial-Messung von QD-Tinten wurde eine industriell erprobte und einfache Methode zur Untersuchung der Oberflächenladungen verwendet. Darüber hinaus wurde optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma (inductively coupled plasma-atomic emission spectroscopy ICP-OES) zur Bestimmung der Elementzusammensetzung durchgeführt. Diese Dissertation beschäftigt sich sowohl mit der Synthese von hocheffizienten InP QDs mit schmalbandiger Emission (full width at half maximum FWHM), als auch den Zusammenhängen zwischen QD-Material und QD-Bauelementen. Die Ergebnisse sind einerseits relevant für die breitere industrielle Anwendung dieser Materialien und andererseits für ein tieferes chemisch-physikalisches, theoretisches und experimentelles Verständnis der Prozesse, die zu langlebigen und stabilen Bauelementen führen. KW - colloidal quantum dot KW - Cu doped InP KW - surface chemistry KW - QD stability KW - QD device KW - kolloidaler Quantenpunkt KW - Cu-dotiertes InP KW - Oberflächenchemie KW - QD-Stabilität KW - QD-Gerät Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585351 ER - TY - JOUR A1 - Ogunkola, Moses Olalekan A1 - Guiraudie-Capraz, Gaelle A1 - Féron, François A1 - Leimkühler, Silke T1 - The Human Mercaptopyruvate Sulfurtransferase TUM1 Is Involved in Moco Biosynthesis, Cytosolic tRNA Thiolation and Cellular Bioenergetics in Human Embryonic Kidney Cells JF - Biomolecules N2 - Sulfur is an important element that is incorporated into many biomolecules in humans. The incorporation and transfer of sulfur into biomolecules is, however, facilitated by a series of different sulfurtransferases. Among these sulfurtransferases is the human mercaptopyruvate sulfurtransferase (MPST) also designated as tRNA thiouridine modification protein (TUM1). The role of the human TUM1 protein has been suggested in a wide range of physiological processes in the cell among which are but not limited to involvement in Molybdenum cofactor (Moco) biosynthesis, cytosolic tRNA thiolation and generation of H2S as signaling molecule both in mitochondria and the cytosol. Previous interaction studies showed that TUM1 interacts with the L-cysteine desulfurase NFS1 and the Molybdenum cofactor biosynthesis protein 3 (MOCS3). Here, we show the roles of TUM1 in human cells using CRISPR/Cas9 genetically modified Human Embryonic Kidney cells. Here, we show that TUM1 is involved in the sulfur transfer for Molybdenum cofactor synthesis and tRNA thiomodification by spectrophotometric measurement of the activity of sulfite oxidase and liquid chromatography quantification of the level of sulfur-modified tRNA. Further, we show that TUM1 has a role in hydrogen sulfide production and cellular bioenergetics. KW - Moco biosynthesis KW - sulfite oxidase KW - cytosolic tRNA thiolation KW - 5-methoxycarbonylmethyl-2-thiouridine KW - H2S biosynthesis KW - cellular bioenergetics Y1 - 2023 U6 - https://doi.org/10.3390/biom13010144 SN - 2218-273X VL - 13 SP - 1 EP - 23 PB - MDPI CY - Basel, Schweiz ET - 1 ER - TY - JOUR A1 - Heissel, Andreas A1 - Pietrek, Anou F. A1 - Kangas, Maria A1 - Van der Kaap-Deeder, Jolene A1 - Rapp, Michael A. T1 - The Mediating Role of Rumination in the Relation between Basic Psychological Need Frustration and Depressive Symptoms JF - Journal of Clinical Medicine N2 - Research within the framework of Basic Psychological Need Theory (BPNT) finds strong associations between basic need frustration and depressive symptoms. This study examined the role of rumination as an underlying mechanism in the association between basic psychological need frustration and depressive symptoms. A cross-sectional sample of N = 221 adults (55.2% female, mean age = 27.95, range = 18–62, SD = 10.51) completed measures assessing their level of basic psychological need frustration, rumination, and depressive symptoms. Correlational analyses and multiple mediation models were conducted. Brooding partially mediated the relation between need frustration and depressive symptoms. BPNT and Response Styles Theory are compatible and can further advance knowledge about depression vulnerabilities. KW - psychopathology KW - elf-determination theory KW - response styles theory KW - frustration KW - depressive disorder KW - emotional regulation KW - rumination Y1 - 2023 U6 - https://doi.org/10.3390/jcm12020395 SN - 2077-0383 VL - 12 SP - 1 EP - 10 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - THES A1 - De Andrade Queiroz, Anna Barbara T1 - The Milky Way disks, bulge, and bar sub-populations T1 - Die Scheiben, der Bulge und der Balken der Milchstraße Subpopulationen BT - a chemo-dynamical view of our Galaxy in the APOGEE + Gaia era BT - ein chemodynamischer Blick auf unsere Galaxie in der APOGEE + Gaia Ära N2 - In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology. At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates. We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood. We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages. With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation. N2 - In den letzten Jahrzehnten hat die Astronomie mit großen galaktischen Durchmusterungen einen Boom erlebt. Die dadurch gewonnenen detaillierten Informationen über Millionen von Einzelsternen in der Milchstraße bringen uns der Beantwortung einer der wichtigsten Fragen der Astrophysik einen Schritt näher: Wie entstehen und entwickeln sich Galaxien? Die Milchstraße ist die einzige Galaxie, in der wir viele Sterne in ihre hochdimensionale chemische Zusammensetzung und ihren vollständigen Phasenraum zerlegen können, was analog zu fossilen Aufzeichnungen die Entstehungsgeschichte der Galaxie enthüllen kann. Für kosmologische Modelle ist es von entscheidender Bedeutung, die Prozesse zu verstehen, die zur Bildung großer Strukturen wie der Milchstraße führen; wir nennen diese Studienrichtung Galaktische Archäologie oder Nahfeldkosmologie. Im Mittelpunkt dieser Arbeit stehen die Bemühungen, die Scheiben und den Bulge unserer Galaxie chemisch und dynamisch zu charakterisieren. Die Ergebnisse, die wir in dieser Arbeit vorstellen, waren nur dank des starts des astrometrischen Satelliten Gaia möglich, der das Gebiet der galaktischen Archäologie durch die präzise Messung der Positionen, Parallaxenwinkel und Eigenbewegungen von mehr als einer Milliarde Sterne revolutioniert hat. Ein weiterer, aber nicht minder wichtiger Durchbruch ist die APOGEE-Durchmusterung, die Spektren im nahen Infrarot beobachtet hat, was es uns erlaubt, durch die staubigen Regionen der Milchstraße hindurchzublicken und die chemischen Fingerabdrücke von Hunderttausenden von Sternen zu bestimmen. Um die Struktur der Milchstraße genau darzustellen, verwenden und entwickeln wir das Isochrone-fitting-Tool StarHorse; diese Software kann Sternentfernungen, Aussterbezeiten und Alter vorhersagen, indem sie Astrometrie, Photometrie und Spektroskopie auf der Grundlage von Modellen der Sternentwicklung kombiniert. Der Code StarHorse ist von zentraler Bedeutung für die Berechnung von Entfernungen, bei denen Gaia -Parallaxen allein keine Bestimmung ermöglichen. Wir zeigen, dass wir durch die Kombination von Gaia, APOGEE und StarHorse eine chemische Kartographie der Milchstraßenscheiben von ihrem äußersten bis zum innersten Teil erstellen können. Eine solche Karte ist in der inneren Galaxis beispiellos und zeigt ein bimodales chemisches Muster, das auf zwei Populationen mit unterschiedlichen Entstehungsgeschichten hinweist. Darüber hinaus bestätigen die Daten einen chemischen Gradienten innerhalb der dünnen Scheibe, bei dem der Gehalt an Elementen und Metallen aus 𝛼-Prozessen zum Zentrum hin zunimmt ist. Eine Überdichte in der Anzahl der Sterne bestätigt zudem die Signatur eines Balkens in der inneren Galaxie. Modelle der Galaxienentstehung sagen gewöhnlich deren Beginn im galaktischen Zentrum voraus. Wir konzentrieren uns auf eine Stichprobe in der inneren Galaxie und erwarten, dass wir primordiale stellare Populationen finden. Wir bestätigen die chemische Bimodalität der inneren Galaxie und dass der galaktische Balken sowohl aus Sternen mit hohem als auch mit niedrigem 𝛼 besteht, was darauf hindeutet, dass sich der Balken durch säkulare Evolution gebildet hat, bei der bereits existierende Sterne eingefangen wurden. Durch die Analyse des chemischen Orbitalraums der inneren galaktischen Regionen können wir die verschiedenen Populationen, die diese komplexe Region bewohnen, unterscheiden. Wir zeigen das Vorhandensein einer dünnen Scheibe, einer dicken Scheibe, eines Balkens und einer gegenläufig rotierenden Population, die dem Ergebnis einer gestörten proto-galaktischen Scheibe ähnelt. Unsere Studie zeigt auch, dass die innere Galaxie eine große Menge an supermetallreichen Sternen enthält, die bis zum Dreifachen der solaren Metallizität reichen. Möglicherweise handelt es sich bei der Gruppe alter supermetallreicher Sterne, die in der Sonnenumgebung gefunden wurden um Kandidaten für Migranten aus den innersten Regionen. Wir befassen uns auch mit der komplizierten Aufgabe der Bestimmung individueller Sternalter. Mit StarHorse berechnen wir das Alter von Hauptreihenabzweig- und Unterriesensternen für mehrere öffentliche spektroskopische Durchmusterungen. Wir validieren unsere Ergebnisse, indem wir lineare Abhängigkeiten zwischen den chemischen Häufigkeiten und der Zeit untersuchen, da die 𝛼- und Neutroneneinfang-Elemente empfindlich auf das Alter reagieren, was auf die unterschiedlichen Zeitskalen der Anreicherung dieser Elemente zurückzuführen ist. Zur weiteren Untersuchung der Scheiben in der Sonnenumgebung verwenden wir einen nicht überwachten Algorithmus für maschinelles Lernen, um eine mehrdimensionale Trennung der chrono-chemischen Sterngruppen vorzunehmen. Dies macht die chemisch dicke Scheibe, die dünne Scheibe und junge 𝛼 Sterne erkennbar. Es zeigt sich, dass die dicke Scheibe eine geringe Altersstreuung aufweist, was auf ihre schnelle Entstehung hindeutet, während die dünne Scheibe eine große Altersspanne abdeckt. Mit bahnbrechenden Daten liefert diese Arbeit ein detailliertes chemodynamisches Bild der Scheibe und des Bulge der Galaxis. Unsere Erkenntnisse über die Milchstraße können mit der Entwicklung von Scheibengalaxien mit hoher Rotverschiebung in Verbindung gebracht werden und so zur Lösung des Rätsels der Galaxienbildung beitragen. KW - stars: distances KW - fundamental parameters KW - statistics KW - galaxy: general KW - disc KW - bulge KW - stellar content KW - Bulge KW - Scheibe KW - fundamentale Parameter KW - Galaxie: allgemein KW - Sterne: Entfernungen KW - Statistik KW - stellarer Inhalt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590615 ER - TY - THES A1 - Pons, Michaël T1 - The Nature of the tectonic shortening in Central Andes T1 - Die Beschaffenheit der tektonischen Verkürzung in den Zentralanden N2 - The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that “bulldozes” the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as “flat-slab conveyor”. Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively. N2 - Die Andenkordillere ist ein Gebirgszug am westlichen Rand Südamerikas und Teil des östlichen zirkumpazifischen Gebirgsgürtels. Der ~7000 km lange Gebirgszug ist einer der längsten der Erde und beherbergt mit dem Altiplano-Puna-Plateau das zweitgrößte orogenetische Plateau der Welt. Die Anden sind als nicht-kollisionsbedingtes Subduktionsgebirge bekannt, das durch die Wechselwirkung zwischen der subduzierten ozeanischen Nazca-Platte und der südamerikanischen Kontinentalplatte entstanden ist. Entlang des Höhenzugs der Anden lassen sich Segmente unterschiedlicher morphotektonischer Provinzen ausmachen, die durch Variationen in topographischer Höhe, vulkanischer Aktivität, Deformationsform, Krustendicke, Krustenverkürzung und ozeanischer Plattengeometrie gekennzeichnet sind. Der größte Teil der heutigen Hebung lässt sich durch die Krustenverkürzung der letzten 50 Mio. Jahre erklären, wobei das Ausmaß der Verkürzung von ca. 300 km im zentralen Segment (15°S-30°S) auf weniger als die Hälfte im südlichen Teil (30°S-40°S) abnimmt. Es wurden mehrere Faktoren vorgeschlagen, die das Ausmaß und die Beschleunigung der Verkürzung der zentralen Anden in den letzten 15 Mio. Jahren beeinflusst haben könnten. Ein wichtiger Faktor ist wahrscheinlich die Plattengeometrie. Durch die Subduktion des Juan-Fernandez-Rückens und dessen hohe Auftriebskraft fällt die Platte bei 27-33°S in ~100 km Tiefe horizontal ein und bildet den pampeanischen flat-slab. Es wird angenommen, dass die horizontale Subduktion den thermomechanischen Zustand des Sierras-Pampeanas-Vorlandes beeinflusst, indem sie beispielsweise die Lithosphäre stärkt und die dickschalige Verlagerung der Deformation nach Osten sowie die Hebung der kristallinen Basis der Sierras-Pampeanas fördert. Vor etwa 30 Mio. Jahren verschob sich der flat-slab von der geographischen Breite des Altiplano zu seiner heutigen Position nach Süden. Die mit der Positionsverlagerung verbundenen Prozesse und Folgen für die gleichzeitige Beschleunigung der Verkürzungsraten in den zentralen Anden sind noch immer unklar. Obwohl die Passage des flat-slab eine Erklärung für dafür sein könnte, erklärt ihr Zeitpunkt nicht die beiden aus der Geologie abgeleiteten Verkürzungsimpulse vor etwa 15 und 4 Mio. Jahren. Ich stelle die Hypothese auf, dass die Deformation in den zentralen Anden durch eine komplexe Wechselwirkung zwischen der Subduktionsdynamik der Nazca-Platte und der dynamischen Materialschwächung der südamerikanischen Platte aufgrund einer Reihe von Prozessen in der oberen Platte gesteuert wird. Um diese Hypothese zu prüfen, ist eine detaillierte Untersuchung der Rolle des flat-slab, sowie der strukturellen Vererbung der Kontinentalplatte und der Subduktionsdynamik in den Anden erforderlich. Daher habe ich zwei Klassen von numerischen thermomechanischen Modellen erstellt: (i) Die erste Klasse von Modellen umfasst eine Reihe von generischen E-W-orientierten 2D-Subduktionsmodellen mit hoher Auflösung. Diese beinhalten subhorizontalen Subduktion um die Rolle der Subduktionsdynamik auf die zeitliche Variabilität der Verkürzungsrate in den zentralen Anden auf dem Altiplano (~21°S) zu untersuchen. Die modellierte Verkürzungsrate wurde mit der beobachteten tektonischen Verkürzungsrate in den zentralen Anden validiert. (ii) Die zweite Klasse von Modellen besteht aus einer Reihe von datengesteuerten 3D-Modellen der heutigen pampeanischen flat-slab-Konfiguration und der Sierras Pampeanas (26-42°S). Diese Modelle zielen darauf ab, den relativen Beitrag der heutigen subhorizontalen Subduktion und der ererbten Strukturen in der kontinentalen Lithosphäre zur Dehnungslokalisierung zu untersuchen. Beide Modellklassen wurden mit Hilfe des fortschrittlichen geodynamischen Finite-Elemente-Codes ASPECT erstellt. Das erste Hauptergebnis dieser Arbeit ist die Vermutung, dass zeitliche Änderungen der Verkürzung in den Zentralanden in erster Linie durch die Subduktionsdynamik der Nazca-Platte gesteuert werden, während diese in die Mantelübergangszone eindringt. Die Dynamik hängt von der westwärts gerichteten Geschwindigkeit der südamerikanischen Platte ab, die die Hauptantriebskraft für die Krustenverkürzung in den Anden darstellt und den Subduktionsgraben zum Zurückziehen zwingt. Wenn die subduzierende Platte den unteren Erdmantel erreicht, wölbt sie sich auf, bis der erzwungene Rückzug des Grabens dazu führt, dass auch die Platte im oberen Erdmantel steiler wird. Die aufgesteilte Platte behindert wiederum den Graben, der sich der vorrückenden südamerikanischen Platte widersetzt, was eine pulsierende Verkürzung zur Folge hat. Dieses Subduktionsregime, bestehend aus Aufwölbung und Aufsteilung, könnte durch die allgemeine westwärts gerichtete Geschwindigkeitsabnahme der südamerikanischen Platte ausgelöst worden sein. Der Durchgang des flat-slab ist zudem eine notwendige Bedingung, um die Verkürzung der Kontinentalplatte voran zu treiben, da subhorizontale Subduktion Teile der Mantellithosphäre abträgt und so die Kontinentalplatte schwächt. Dieser Prozess trägt somit zur effizienten Verkürzung bei während der Graben behindert wird und ist gefolgt von der Ablösung der Mantellithosphäre vor etwa 20 Mio. Jahren. Das Subduzieren des brasilianischen kratonischen Schildes unter das Orogen erfolgte schließlich vor etwa 11 Mio. Jahren aufgrund der mechanischen Schwächung der dicken Sedimentschicht, die den Schildrand bedeckte, sowie wegen des abnehmenden Widerstands der geschwächten Gebirgslithosphäre. Das zweite Hauptergebnis dieser Arbeit ist die Vermutung, dass der kalte flat-slab die darüber liegende kontinentale Lithosphäre stärkt und damit verhindert, dass sich Verformungen lokalisieren können. Daher wird die Deformation durch die an der Subduktionsfläche wirkende Scherspannung auf die östliche Front des flat-slab-Segments übertragen. Der flat-slab wirkt wie ein Eindringling, der die unter mantle-keel bekannte Anhäufung von abgelöstem Mantelmaterial beiseite schiebt. Der Versatz in der ostwärts gerichteten Deformationsausbreitung der flachen und der steileren Plattensegmenten im Süden führt zur Bildung einer transpressiven dextralen Scherungszone. Hier werden ererbte Verwerfungen vergangener tektonischer Ereignisse reaktiviert und helfen bei der Lokalisierung neuer Deformation in einer en-echelon-artigen Scherungszone. Dies geschieht durch einen Mechanismus, den ich als "flat-slab-Conveyor" bezeichne. Das laterale Zusammenschieben wird besonders durch das Flacherwerden des flat-slab beeinflusst, welches den Zeitpunkt mehrerer geologischer Ereignisse erklärt, die der Ankunft des flat-slab bei 33°S vorangehen. Dazu gehören der Beginn der Kompression und der Übergang von dünn- zu dickschaliger Deformation, die sich aus der Krustenkontraktion in den Sierras Pampeanas etwa 10 bzw. 6 Mio. Jahre vor der Kollision mit dem Juan-Fernandez-Rücken auf diesem Breitengrad ergaben. KW - Andes KW - Orogen KW - tectonics KW - Subduction KW - Deformation KW - Shortening KW - Flat subduction KW - Geodynamics KW - Altiplano KW - Puna KW - Sierras Pampeanas KW - Foreland KW - Altiplano KW - Anden KW - Deformation KW - Flache Subduktion KW - Vorland KW - Geodynamik KW - Orogen KW - Puna KW - Verkürzung KW - Sierras Pampeanas KW - Subduktion KW - Tektonik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-600892 ER - TY - JOUR A1 - Große-Bölting, Gregor A1 - Scheppach, Lukas A1 - Mühling, Andreas T1 - The Place of Ethics in Computer Science Education JF - Hochschuldidaktik Informatik HDI 2021 (Commentarii informaticae didacticae) N2 - Ethical issues surrounding modern computing technologies play an increasingly important role in the public debate. Yet, ethics still either doesn’t appear at all or only to a very small extent in computer science degree programs. This paper provides an argument for the value of ethics beyond a pure responsibility perspective and describes the positive value of ethical debate for future computer scientists. It also provides a systematic analysis of the module handbooks of 67 German universities and shows that there is indeed a lack of ethics in computer science education. Finally, we present a principled design of a compulsory course for undergraduate students. KW - Ethics KW - Diversity KW - Social impact KW - Bachelor KW - Curriculum analysis KW - Course development Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615982 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 SP - 173 EP - 187 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Wassner, Dalia T1 - The Port Jew and Nuestra América BT - Narratives of Collective Responsibility and Belonging JF - PaRDeS : Journal of the Association for Jewish Studies in Germany JF - PaRDeS : Zeitschrift der Vereinigung für Jüdische Studien e.V. N2 - Jacob Brandon Maduro’s Memoirs and Related Observations (Havana, 1953) speak to the lasting yet malleable legacy of Jewish Caribbean/Atlantic mercantile communities that defined early modern settlement in the Americas. A close reading of the Memoirs, alongside relevant archival records and community narratives, lends new perspectives to scholarship on Port Jewries and the Atlantic Diaspora. Specifically concerned with Jacob’s adoption of such leading intellectual and political tropes as the Monroe doctrine, José Martí’s Nuestra America, and a Zionism that evolved from an ideology to a reality, the Memoirs reveal a narrative at once defined by the tremendous upheavals of the first half of the 20th century, and an enduring sense of Jewish diasporic peoplehood defined through a Port Jew paradigm whereby the preservation of Jewish ethnicity is understood as synonymous with the championing of modernity. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-585580 SN - 978-3-86956-552-1 SN - 1614-6492 SN - 1862-7684 IS - 28 SP - 84 EP - 99 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - RPRT A1 - Amoroso, Sara A1 - Herrmann, Benedikt A1 - Kritikos, Alexander T1 - The Role of Regulation and Regional Government Quality for High Growth Firms BT - The Good, the Bad, and the Ugly T2 - CEPA Discussion Papers N2 - High growth firms (HGFs) are important for job creation and considered to be precursors of economic growth. We investigate how formal institutions, like product- and labor-market regulations, as well as the quality of regional governments that implement these regulations, affect HGF development across European regions. Using data from Eurostat, OECD, WEF, and Gothenburg University, we show that both regulatory stringency and the quality of the regional government influence the regional shares of HGFs. More importantly, we find that the effect of labor- and product-market regulations ultimately depends on the quality of regional governments: in regions with high quality of government, the share of HGFs is neither affected by the level of product market regulation, nor by more or less flexibility in hiring and firing practices. Our findings contribute to the debate on the effects of regulations by showing that regulations are not, per se, “good, bad, and ugly”, rather their impact depends on the efficiency of regional governments. Our paper offers important building blocks to develop tailored policy measures that may influence the development of HGFs in a region. T3 - CEPA Discussion Papers - 71 KW - High growth firms KW - Regulation KW - Quality of regional governments KW - Regions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-612771 SN - 2628-653X IS - 71 ER - TY - THES A1 - Drobyshev, Evgenii T1 - Toxic or beneficial? What is the role of food-relevant selenium species selenoneine? T1 - Giftig oder nützlich? Welche Rolle spielt die lebensmittelrelevante Selenspezies Selenonein? N2 - Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present. The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine. Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells. In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter – OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation. As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation. Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant. N2 - Selen (Se) ist ein essentielles Spurenelement, das in geringen Konzentrationen ubiquitär in der Umwelt vorkommt. Essentielle Funktionen von Se im menschlichen Körper manifestieren sich in einer Vielzahl von Proteinen, die Selenocystein als aktives Zentrum enthalten. Solche Proteine werden Selenoproteine genannt, die in zahlreichen physiologischen Prozessen wie der antioxidativen Abwehr und der Regulierung der Schilddrüsenhormonfunktionen vorkommen. Daher ist bekannt, dass ein Se-Mangel ein breites Spektrum physiologischer Beeinträchtigungen verursacht, insbesondere in solchen Regionen mit niedrigem Se-Bodengahlten. Dennoch kann Se als essentielles Spurenelement auch toxische Wirkungen entfalten, wenn seine Aufnahme das tolerierbare Maß überschreitet. Dementsprechend stellt dieser Bereich zwischen Mangel und Überbelichtung eine optimale Se-Versorgung dar. Dieser Bereich erwies sich jedoch als enger als bei jedem anderen essentiellen Spurenelement. Zusammen mit stark schwankenden SeKonzentrationen im Boden und dem Vorliegen spezifischer Bioakkumulationsfaktoren stellt dies eine deutliche Schwierigkeit bei der Beurteilung des epidemiologischen Selenstatus dar. Während im Körper mehrere Selenoproteine vorliegen, erfolgt seine Aufnahme hauptsächlich in Form kleiner organischer oder anorganischer Moleküle. Somit hängt die Se-Exposition nicht nur von der täglichen Aufnahme ab, sondern auch von der jeweiligen chemischen Form, in der es vorliegt. Die essentiellen Funktionen von Selen sind seit langem bekannt und seine Primärformen in verschiedenen Nahrungsquellen dominierenden Formen wurden bereits gut beschrieben. Dennoch wurden erst in den letzten Jahrzehnten neue analytische Möglichkeiten für eine umfassendere Untersuchung von Se-Spezies und ihren Derivaten entwickelt. Beispielsweise wurde 2010 eine neue Se-Verbindung im Blut und im Gewebe von Rotem Thunfisch identifiziert. Es wurde Selenonein (SeN) genannt, da es ein Isolog des natürlich vorkommenden Antioxidans Ergothionein (ET) ist, bei dem Se durch Schwefel ersetzt ist. In den folgenden Jahren wurde SeN in einer Reihe von essbaren Fischarten identifiziert und erregte einerseits als neue Nahrungsquelle für Se und andererseits als potenziell starkes Antioxidans Aufmerksamkeit. Studien an Probanden, deren Ernährung hauptsächlich von Fisch geprägt ist, haben gezeigt, dass SeN den hauptsächlichen nicht-proteingebundenen Se-Pool in ihrem Blut darstellt. Erste Studien mit angereicherten Fischextrakten zeigten bereits das hohe antioxidative Potenzial von SeN und seine mögliche Funktion bei der Entgiftung von Methylquecksilber im Fisch. Zellkulturstudien zeigten, dass SeN den gleichen Transporter wie Ergothionein nutzen kann und ein weiterer SeN-Metabolit wurde im menschlichen Urin gefunden. Bis vor kurzem waren Studien zu den Eigenschaften von SeN aufgrund fehlender Möglichkeiten, die reine Verbindung zu erwerben, stark eingeschränkt. Als wichtige Grundlage für die vorliegende Arbeit diente zunächst die erfolgreiche Synthese des SeN, welche an der Universität Graz unter Verwendung gentechnisch veränderter Hefen erfolgte. In der aktuellen Studie wurde unter Verwendung von HepG2-Leberkarzinomzellen gezeigt, dass SeN in physiologisch relevanten Konzentrationen keine toxischen Effekte in diesen Hepatozyten induziert. Bioverfügbarkeitsexperimente zeigten, dass SeN für die verwendeten Leberzellen nicht bioverfügbar ist. Im nächsten Teil wurde ein Modell der Blut-Hirn-Schranke (BHS) verwendet, das auf kapillaren Endothelzellen aus dem Schweinehirn basiert, um den möglichen Transfer von SeN in das zentrale Nervensystem (ZNS) zu untersuchen. Die Bewertung von Toxizitätsmarkern in diesen Endothelzellen und die online Überwachung der Barriere-Bedingungen während der Transferexperimente zeigten, dass bei physiologisch relevanten Konzentrationen keine toxischen Wirkungen von SeN auf das BHS-Endothel auftreten. Daten bezüglich des Übergangs der Selenspezies SeN zeigten zwar eine langsame, jedoch eine nicht zu vernachlässigenden Menge, die die Barriere passieren kann. Die gleichzeitige Inkubation von SeN auf beiden Barriere-Seiten verursachte keinen seitenspezifischen Transfer von SeN, was auf einen passiven Diffusionsmechanismus von SeN über die BHS hindeutet. Diese Daten stimmen mit Tierstudien überein, in denen eine ET-Akkumulation im Rattengehirn beobachtet wurde, obwohl die BHS der Ratte nicht über den primären ET-Transporter – OCTN1 – verfügt. Die Untersuchung von Monolayern aus kapillaren Endothelzellen nach Inkubation mit SeN und Referenzselenverbindungen zeigte keinen signifikanten Anstieg der intrazellulären Selenkonzentration. Speziesspezifische Se-Messungen in Mediumproben aus den apikalen und basolateralen Kompartimenten, sowie in den Zelllysaten zeigten keine SeN-Metabolisierung. Daraus kann geschlossen werden, dass SeN das Gehirn ohne signifikante Transformation erreichen kann. Als dritter Teil dieser Arbeit wurde die Bewertung der antioxidativen Eigenschaften von SeN in menschlichen Caco-2, also kolorektale Adenokarzinomzellen, durchgeführt. Frühere Studien zeigten, dass das Darmepithel in der Lage ist, SeN aktiv vom Darmlumen zur Blutseite zu transportieren und dort SeN anzureichern. Weitere Untersuchungen im Rahmen der aktuellen Arbeiten zeigten ein viel höheres antioxidatives Potenzial von SeN im Vergleich zu ET. Die Aktivität als Radikalfänger nach Inkubation mit SeN war ähnlich wie bei Selenit und Selenomethionin. Wobei die Wirkung von SeN auf die Lebensfähigkeit von Darmzellen unter oxidativen Bedingungen jedoch ähnlich der durch ET verursachten war. Um die Frage zu beantworten, ob SeN als diätetische Se-Quelle verwendet werden kann um die Aktivität von Selenoproteinen zu induzieren, wurden zusätzlich die Aktivität der Glutathionperoxidase (GPx) und die Sekretion von Selenoprotein P (SelenoP) in Caco-2-Zellen gemessen. Wie erwartet, bewirkten die Referenz-Selenverbindungen Selenit und Selenomethionin eine effiziente Induktion der GPx-Aktivität, im Gegensatz zu diesen hatte SeN keinen Einfluss auf die GPx-Aktivität. Um die Möglichkeit einer Einbettung von SeN in das Selenoproteom zu untersuchen, wurde SelenoP im Kulturmedium gemessen. Obwohl Caco-2-Zellen SeN effektiv in viel höherenMengen als Selenit oder Selenomethionin aufnehmen, wurde nach der SeN-Inkubation keine Sekretion von SelenoP beobachtet. Zusammenfassend können wir schlussfolgern, dass SeN kaum als Se-Quelle für die Selenoproteinsynthese dienen kann. SeN weist jedoch starke antioxidative Eigenschaften auf, die auftreten, wenn Schwefel in ET durch Se ausgetauscht wird. Daher ist SeN von besonderem Interesse für die Forschung, nicht als Teil des Se-Stoffwechsels, sondern als wichtiges endemisches diätetisches Antioxidans. KW - selenium KW - selenoneine KW - HepG2 KW - Caco-2 KW - PBCEC KW - Caco-2 KW - HepG2 KW - PBCEC KW - Selen KW - Selenonein Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573794 ER - TY - JOUR A1 - Stone, Kate A1 - Nicenboim, Bruno A1 - Vasishth, Shravan A1 - Rösler, Frank T1 - Understanding the effects of constraint and predictability in ERP JF - Neurobiology of language N2 - Intuitively, strongly constraining contexts should lead to stronger probabilistic representations of sentences in memory. Encountering unexpected words could therefore be expected to trigger costlier shifts in these representations than expected words. However, psycholinguistic measures commonly used to study probabilistic processing, such as the N400 event-related potential (ERP) component, are sensitive to word predictability but not to contextual constraint. Some research suggests that constraint-related processing cost may be measurable via an ERP positivity following the N400, known as the anterior post-N400 positivity (PNP). The PNP is argued to reflect update of a sentence representation and to be distinct from the posterior P600, which reflects conflict detection and reanalysis. However, constraint-related PNP findings are inconsistent. We sought to conceptually replicate Federmeier et al. (2007) and Kuperberg et al. (2020), who observed that the PNP, but not the N400 or the P600, was affected by constraint at unexpected but plausible words. Using a pre-registered design and statistical approach maximising power, we demonstrated a dissociated effect of predictability and constraint: strong evidence for predictability but not constraint in the N400 window, and strong evidence for constraint but not predictability in the later window. However, the constraint effect was consistent with a P600 and not a PNP, suggesting increased conflict between a strong representation and unexpected input rather than greater update of the representation. We conclude that either a simple strong/weak constraint design is not always sufficient to elicit the PNP, or that previous PNP constraint findings could be an artifact of smaller sample size. KW - N400 KW - anterior PNP KW - posterior P600 KW - probabilistic processing KW - constraint KW - predictability KW - entropy Y1 - 2022 U6 - https://doi.org/10.1162/nol_a_00094 SN - 2641-4368 VL - 4 IS - 2 SP - 221 EP - 256 PB - MIT Press CY - Cambridge, MA, USA ER -