TY - JOUR A1 - Uhlemann, Erhard A1 - Banße, Wolfgang A1 - Ludwig, Eberhard A1 - Schilde, Uwe A1 - Weller, Frank A1 - Lehmann, Andreas T1 - Template-Reaktion von Bis(acetylacetonato)-dioxo-molybdän(VI) mit Benzoylhydrazin Y1 - 1994 ER - TY - JOUR A1 - Banße, Wolfgang A1 - Fliegner, Jana Ute A1 - Hennig, H. A1 - Lehmann, Andreas A1 - Uhlemann, Erhard A1 - Tschwatschal, F. T1 - Ligand exchange reactions of molybdenum hexacarbonyl with tridentate diacidic ligands Y1 - 1997 ER - TY - JOUR A1 - Vorburger, Thomas A1 - Nedielkov, Ruslan A1 - Brosig, Alexander A1 - Bok, Eva A1 - Schunke, Emina A1 - Steffen, Wojtek A1 - Mayer, Sonja A1 - Goetz, Friedrich A1 - Möller, Heiko Michael A1 - Steuber, Julia T1 - Role of the Na+-translocating NADH:quinone oxidoreductase in voltage generation and Na+ extrusion in Vibrio cholerae JF - Biochimica et biophysica acta : Bioenergetics N2 - For Vibrio cholerae, the coordinated import and export of Na+ is crucial for adaptation to habitats with different osmolarities. We investigated the Na+-extruding branch of the sodium cycle in this human pathogen by in vivo Na-23-NMR spectroscopy. The Na+ extrusion activity of cells was monitored after adding glucose which stimulated respiration via the Na+-translocating NADH:quinone oxidoreductase (Na+-NQR). In a V. cholerae deletion mutant devoid of the Na+-NQR encoding genes (nqrA-F), rates of respiratory Na+ extrusion were decreased by a factor of four, but the cytoplasmic Na+ concentration was essentially unchanged. Furthermore, the mutant was impaired in formation of transmembrane voltage (Delta psi, inside negative) and did not grow under hypoosmotic conditions at pH 8.2 or above. This growth defect could be complemented by transformation with the plasmid encoded nqr operon. In an alkaline environment, Na+/H+ antiporters acidify the cytoplasm at the expense of the transmembrane voltage. It is proposed that, at alkaline pH and limiting Na+ concentrations, the Na+-NQR is crucial for generation of a transmembrane voltage to drive the import of H+ by electrogenic Na+/H+ antiporters. Our study provides the basis to understand the role of the Na+-NQR in pathogenicity of V. cholerae and other pathogens relying on this primary Na+ pump for respiration. (C) 2015 Elsevier B.V. All rights reserved. KW - Nuclear magnetic resonance (NMR) KW - Sodium transport KW - Vibrio cholerae KW - Respiration KW - Na+ homeostasis KW - Hypoosmotic stress Y1 - 2016 U6 - https://doi.org/10.1016/j.bbabio.2015.12.010 SN - 0005-2728 SN - 0006-3002 VL - 1857 SP - 473 EP - 482 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Ramadan, Shahenda A1 - Guerrero, Paula A1 - Nedielkov, Ruslan A1 - Klishin, Nikolai A1 - Dimova, Rumiana A1 - Silva, Daniel V. A1 - Möller, Heiko T1 - Building a mimetic system for unraveling protein-protein interactions on membranes T2 - European biophysics journal : with biophysics letters ; an international journal of biophysics Y1 - 2021 U6 - https://doi.org/10.1007/s00249-021-01558-w SN - 0175-7571 SN - 1432-1017 VL - 50 IS - SUPPL 1 SP - S153 EP - S153 PB - Springer CY - Berlin ; Heidelberg ; New York ER - TY - JOUR A1 - Prüfert, Christian A1 - Beitz, Toralf A1 - Reich, Olaf A1 - Löhmannsröben, Hans-Gerd T1 - Inline process analysis of copper-bearing aerosols using laser-induced breakdown spectroscopy, laser-induced incandescence and optical imaging JF - Spectrochimica acta, Part B, Atomic spectroscopy N2 - The quantification and identification of aerosols in industry plays a key role in process monitoring and control and lays the foundation for process automation aspired by the industry 4.0 initiative. However, measuring particulate matter's mass and number concentrations in harsh environments poses great analytical constraints. The presented approach comprises a comprehensive set of light-and imaging-based techniques, all contactless, in-line, and real-time. It includes, but is not limited to, stroboscopic imaging, laser-induced breakdown spectroscopy (LIBS) and laser-induced incandescence (LII). Stroboscopic imaging confirmed the particles sphericity and was used to measure the particle number density. A phase-selective LIBS setup with low fluence and 500 Hz repetition rate was used to classify each particle with a single-pulse and in real time. Simultaneously, the created plasma was captured by CCD imaging to determine the detection volume and hit rate of the LIBS setup. Both data sets combined were converted to a particle number density, which was consistent with the particle number density of the stroboscopic measurements. Furthermore, using a photodiode and microphone in parallel to the LIBS setup allowed for the photoacoustic normalization of the spectral line intensity at the laser repetition rate of 500 Hz. This was done as a partial photoacoustic normalization method with the cut-off based on the coefficient of variation (CV), reducing it by 25%. Aside from that photodiode and microphone were proven to be valuable event counting with the advantage of the less spatially constricted. A second laser setup was used for laser -induced incandescence (LII) making it possible to classify the particles based on their incandescence tendency. Given its larger probing volume, LII could be employed at very low particle number densities. With respect to the current literature, this is the first approach of using LII as an in-line, real-time analytical technique for the compositional classification of metal-bearing aerosols. KW - LIBS KW - LII KW - aerosol. photoacoustics KW - stroboscopic imaging KW - minerals Y1 - 2022 U6 - https://doi.org/10.1016/j.sab.2022.106527 SN - 0584-8547 SN - 1873-3565 VL - 197 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Wessig, Pablo A1 - Badetko, Dominik A1 - Koebe, Michael T1 - Triplet sensitized Photo-Dehydro-Diels-Alder reaction JF - ChemistrySelect N2 - We report on the triplet sensitization of the intramolecular Photo-Dehydro-Diels-Alder (PDDA) reaction of two diaryl suberates bearing methyl propiolate chromophors. Compared with the non-sensitized irradiation, considerably increased yields could be observed. Moreover, it is possible to use the more efficient UVA lamps instead of UVB lamps. Among three investigated sensitizers (xanthone, benzophenone, thioxanthone) xanthone gave the best results. KW - light sources KW - photochemistry KW - photodehydro-Diels-Alder reaction KW - triplet sensitization Y1 - 2022 U6 - https://doi.org/10.1002/slct.202202648 SN - 2365-6549 VL - 7 IS - 38 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Martin, Johannes T1 - Synthesis of protein-polymer conjugates and block copolymers via sortase-mediated ligation N2 - In den vergangenen Jahrzehnten haben therapeutische Proteine in der pharmazeutischen Industrie mehr und mehr an Bedeutung gewonnen. Werden Proteine nichtmenschlichen Ursprungs verwendet, kann es jedoch zu einer Immunreaktion kommen, sodass das Protein sehr schnell aus dem Körper ausgeschieden oder abgebaut wird. Um die Zirkulationszeit im Blut signifikant zu verlängern, werden die Proteine mit synthetischen Polymeren modifiziert (Protein-Polymer-Konjugate). Die Proteine aller heute auf dem Markt erhältlichen Medikamente dieser Art tragen eine oder mehrere Polymerketten aus Poly(ethylenglycol) (PEG). Ein Nachteil der PEGylierung ist, dass viele Patienten bei regelmäßiger Einnahme dieser Medikamente Antikörper gegen PEG entwickeln, die den effizienzsteigernden Effekt der PEGylierung wieder aufheben. Ein weiterer Nachteil der PEGylierung ist die oftmals deutlich verringerte Aktivität der Konjugate im Vergleich zum nativen Protein. Der Grund dafür ist die Herstellungsmethode der Konjugate, bei der meist die primären Amine der Lysin-Seitenketten und der N-Terminus des Proteins genutzt werden. Da die meisten Proteine mehrere gut zugängliche Lysine aufweisen, werden oft unterschiedliche und teilweise mehrere Lysine mit PEG funktionalisiert, was zu einer Mischung an Regioisomeren führt. Je nach Position der PEG-Kette kann das aktive Zentrum abgeschirmt oder die 3D-Struktur des Proteins verändert werden, was zu einem teilweise drastischen Aktivitätsabfall führt. In dieser Arbeit wurde eine neuartige Methode zur Ligation von Makromolekülen untersucht. Die Verwendung eines Enzyms als Katalysator zur Verbindung zweier Makromoleküle ist bisher wenig untersucht und ineffizient. Als Enzym wurde Sortase A ausgewählt, eine gut untersuchte Ligase aus der Familie der Transpeptidasen, welche die Ligation zweier Peptide katalysieren kann. Ein Nachteil dieser Sortase-vermittelten Ligation ist, dass es sich um eine Gleichgewichtsreaktion handelt, wodurch hohe Ausbeuten schwierig zu erreichen sind. Im Rahmen dieser Dissertation wurden zwei zuvor entwickelte Methoden zur Verschiebung des Gleichgewichts ohne Einsatz eines großen Überschusses von einem Edukt für Makromoleküle überprüft. Zur Durchführung der Sortase-vermittelten Ligation werden zwei komplementäre Peptidsequenzen verwendet, die Erkennungssequenz und das Nukleophil. Um eine systematische Untersuchung durchführen zu können, wurden alle nötigen Bausteine (Protein-Erkennungssequenz zur Reaktion mit Nukleophil-Polymer und Polymer-Erkennungssequenz mit Nukleophil-Protein) hergestellt. Als Polymerisationstechnik wurde die radikalische Polymerisation mit reversibler Deaktivierung (im Detail, Atom Transfer Radical Polymerization, ATRP und Reversible Addition-Fragmentation Chain Transfer, RAFT polymerization) gewählt, um eine enge Molmassenverteilung zu erreichen. Die Herstellung der Bausteine begann mit der Synthese der Peptide via automatisierter Festphasen-Peptidsynthese, um eine einfache Änderung der Peptidsequenz zu gewährleisten und um eine Modifizierung der Polymerkette nach der Polymerisation zu umgehen. Um die benötigte unterschiedliche Funktionalität der zwei Peptidsequenzen (freier C-Terminus bei der Erkennungssequenz bzw. freier N-Terminus bei dem Nukleophil) zu erreichen, wurden verschiedene Linker zwischen Harz und Peptid verwendet. Danach wurde der Kettenüberträger (chain transfer agent, CTA) zur Kontrolle der Polymerisation mit dem auf dem Harz befindlichen Peptid gekoppelt. Die für die anschließende Polymerisation verwendeten Monomere basierten auf Acrylamiden und Acrylaten und wurden anhand ihrer Eignung als Alternativen zu PEG ausgewählt. Es wurde eine kürzlich entwickelte Technik basierend auf der RAFT-Polymerisation (xanthate-supported photo-iniferter RAFT, XPI-RAFT) verwendet um eine Reihe an Peptid-Polymeren mit unterschiedlichen Molekulargewichten und engen Molekulargewichtsverteilungen herzustellen. Nach Entfernung der Schutzgruppen der Peptid-Seitenketten wurden die Peptid-Polymere zunächst genutzt, um mittels Sortase-vermittelter Ligation zwei Polymerketten zu einem Blockcopolymer zu verbinden. Unter Verwendung von Ni2+-Ionen in Kombination mit einer Verlängerung der Erkennungssequenz um ein Histidin zur Unterdrückung der Rückreaktion konnte ein maximaler Umsatz von 70 % erreicht werden. Dabei zeigte sich ein oberes Limit von durchschnittlich 100 Wiederholungseinheiten; die Ligation von längeren Polymeren war nicht erfolgreich. Danach wurden ein Modellprotein und ein Nanobody mit vielversprechenden medizinischen Eigenschaften mit den für die enzymkatalysierte Ligation benötigten Peptidsequenzen für die Kopplung mit den zuvor hergestellten Peptid-Polymeren verwendet. Dabei konnte bei Verwendung des Modellproteins keine Bildung von Protein-Polymer-Konjugaten beobachtet werden. Der Nanobody konnte dagegen C-terminal mit einem Polymer funktionalisiert werden. Dabei wurde eine ähnliche Limitierung in der Polymer-Kettenlänge beobachtet wie zuvor. Die auf Ni-Ionen basierte Strategie zur Gleichgewichtsverschiebung hatte hier keinen ausschlaggebenden Effekt, während die Verwendung von einem Überschuss an Polymer zur vollständigen Umsetzung des Edukt-Nanobody führte. Die erhaltenen Daten aus diesem Projekt bilden eine gute Basis für weitere Forschung in dem vielversprechenden Feld der enzymkatalysierten Herstellung von Protein-Polymer-Konjugaten und Blockcopolymeren. Langfristig könnte diese Herangehensweise eine vielseitig einsetzbare Herstellungsmethode von ortsspezifischen therapeutischen Protein-Polymer Konjugaten darstellen, welche sowohl eine hohe Aktivität als auch eine lange Zirkulationszeit im Blut aufweisen. N2 - During the last decades, therapeutical proteins have risen to great significance in the pharmaceutical industry. As non-human proteins that are introduced into the human body cause a distinct immune system reaction that triggers their rapid clearance, most newly approved protein pharmaceuticals are shielded by modification with synthetic polymers to significantly improve their blood circulation time. All such clinically approved protein-polymer conjugates contain polyethylene glycol (PEG) and its conjugation is denoted as PEGylation. However, many patients develop anti-PEG antibodies which cause a rapid clearance of PEGylated molecules upon repeated administration. Therefore, the search for alternative polymers that can replace PEG in therapeutic applications has become important. In addition, although the blood circulation time is significantly prolonged, the therapeutic activity of some conjugates is decreased compared to the unmodified protein. The reason is that these conjugates are formed by the traditional conjugation method that addresses the protein's lysine side chains. As proteins have many solvent exposed lysines, this results in a somewhat uncontrolled attachment of polymer chains, leading to a mixture of regioisomers, with some of them eventually affecting the therapeutic performance. This thesis investigates a novel method for ligating macromolecules in a site-specific manner, using enzymatic catalysis. Sortase A is used as the enzyme: It is a well-studied transpeptidase which is able to catalyze the intermolecular ligation of two peptides. This process is commonly referred to as sortase-mediated ligation (SML). SML constitutes an equilibrium reaction, which limits product yield. Two previously reported methods to overcome this major limitation were tested with polymers without using an excessive amount of one reactant. Specific C- or N-terminal peptide sequences (recognition sequence and nucleophile) as part of the protein are required for SML. The complementary peptide was located at the polymer chain end. Grafting-to was used to avoid damaging the protein during polymerization. To be able to investigate all possible combinations (protein-recognition sequence and nucleophile-protein as well as polymer-recognition sequence and nucleophile-polymer) all necessary building blocks were synthesized. Polymerization via reversible deactivation radical polymerization (RDRP) was used to achieve a narrow molecular weight distribution of the polymers, which is required for therapeutic use. The synthesis of the polymeric building blocks was started by synthesizing the peptide via automated solid-phase peptide synthesis (SPPS) to avoid post-polymerization attachment and to enable easy adaptation of changes in the peptide sequence. To account for the different functionalities (free N- or C-terminus) required for SML, different linker molecules between resin and peptide were used. To facilitate purification, the chain transfer agent (CTA) for reversible addition-fragmentation chain-transfer (RAFT) polymerization was coupled to the resin-immobilized recognition sequence peptide. The acrylamide and acrylate-based monomers used in this thesis were chosen for their potential to replace PEG. Following that, surface-initiated (SI) ATRP and RAFT polymerization were attempted, but failed. As a result, the newly developed method of xanthate-supported photo-iniferter (XPI) RAFT polymerization in solution was used successfully to obtain a library of various peptide-polymer conjugates with different chain lengths and narrow molar mass distributions. After peptide side chain deprotection, these constructs were used first to ligate two polymers via SML, which was successful but revealed a limit in polymer chain length (max. 100 repeat units). When utilizing equimolar amounts of reactants, the use of Ni2+ ions in combination with a histidine after the recognition sequence to remove the cleaved peptide from the equilibrium maximized product formation with conversions of up to 70 %. Finally, a model protein and a nanobody with promising properties for therapeutical use were biotechnologically modified to contain the peptide sequences required for SML. Using the model protein for C- or N-terminal SML with various polymers did not result in protein-polymer conjugates. The reason is most likely the lack of accessibility of the protein termini to the enzyme. Using the nanobody for C-terminal SML, on the other hand, was successful. However, a similar polymer chain length limit was observed as in polymer-polymer SML. Furthermore, in case of the synthesis of protein-polymer conjugates, it was more effective to shift the SML equilibrium by using an excess of polymer than by employing the Ni2+ ion strategy. Overall, the experimental data from this work provides a good foundation for future research in this promising field; however, more research is required to fully understand the potential and limitations of using SML for protein-polymer synthesis. In future, the method explored in this dissertation could prove to be a very versatile pathway to obtain therapeutic protein-polymer conjugates that exhibit high activities and long blood circulation times. KW - biohybrid molecules KW - sortaseA KW - polymerization KW - RAFT KW - ATRP KW - peptide synthesis KW - enzymatic conjugation KW - sortagging Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-645669 ER - TY - JOUR A1 - Titov, Evgenii T1 - Effect of conformational disorder on exciton states of an azobenzene aggregate JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Azobenzene is a prototypical molecular photoswitch, widely used to trigger a variety of transformations at different length scales. In systems like self-assembled monolayers or micelles, azobenzene chromophores may interact with each other, which gives rise to the emergence of exciton states. Here, using first-principles calculations, we investigate how conformational disorder (induced, e.g., by thermal fluctuations) affects localization of these states, on an example of an H-type azobenzene tetramer. We find that conformational disorder leads to (partial) exciton localization on a single-geometry level, whereas ensemble-averaging results in a delocalized picture. The pi pi* and n pi* excitons at high and low temperatures are discussed. Y1 - 2022 U6 - https://doi.org/10.1039/d2cp02774g SN - 1463-9076 SN - 1463-9084 VL - 24 IS - 39 SP - 24002 EP - 24006 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Sand, Patrick A1 - Schmidt, Bernd T1 - Orthogonal arylation of a diene-sulfonamide using cationic transition metal catalysts JF - European journal of organic chemistry N2 - The regioselectivity of two mechanistically distinct alkenylation reactions catalyzed by in situ-formed cationic transition metal complexes was studied using N-allyl-N-phenylethenesulfonamide as a model compound. Orthogonal selectivity was observed for the Ru-catalyzed C-H-activating alkenylation with acetanilides, which occurs preferentially at the electron deficient double bond, and for a Pd-catalyzed Heck-type coupling with arene diazonium salts, which occurs preferentially at the more electron rich double bond of the N-allyl substituent. KW - arenes KW - C-H activation KW - palladium KW - ruthenium KW - sulfonamides Y1 - 2022 U6 - https://doi.org/10.1002/ejoc.202201336 SN - 1434-193X SN - 1099-0690 VL - 2022 IS - 47 PB - Wiley-VCH CY - Weinheim ER -