TY - BOOK A1 - Kunze, Matthias A1 - Weske, Mathias T1 - Behavioural Models BT - From Modelling Finite Automata to Analysing Business Processes N2 - This textbook introduces the basis for modelling and analysing discrete dynamic systems, such as computer programmes, soft- and hardware systems, and business processes. The underlying concepts are introduced and concrete modelling techniques are described, such as finite automata, state machines, and Petri nets. The concepts are related to concrete application scenarios, among which business processes play a prominent role. The book consists of three parts, the first of which addresses the foundations of behavioural modelling. After a general introduction to modelling, it introduces transition systems as a basic formalism for representing the behaviour of discrete dynamic systems. This section also discusses causality, a fundamental concept for modelling and reasoning about behaviour. In turn, Part II forms the heart of the book and is devoted to models of behaviour. It details both sequential and concurrent systems and introduces finite automata, state machines and several different types of Petri nets. One chapter is especially devoted to business process models, workflow patterns and BPMN, the industry standard for modelling business processes. Lastly, Part III investigates how the behaviour of systems can be analysed. To this end, it introduces readers to the concept of state spaces. Further chapters cover the comparison of behaviour and the formal analysis and verification of behavioural models. The book was written for students of computer science and software engineering, as well as for programmers and system analysts interested in the behaviour of the systems they work on. It takes readers on a journey from the fundamentals of behavioural modelling to advanced techniques for modelling and analysing sequential and concurrent systems, and thus provides them a deep understanding of the concepts and techniques introduced and how they can be applied to concrete application scenarios. Y1 - 2016 SN - 978-3-319-44958-6 PB - Springer CY - Cham ER - TY - BOOK A1 - Smirnov, Sergey A1 - Reijers, Hajo A. A1 - Nugteren, Thijs A1 - Weske, Mathias T1 - Business process model abstraction : theory and practice N2 - Business process management aims at capturing, understanding, and improving work in organizations. The central artifacts are process models, which serve different purposes. Detailed process models are used to analyze concrete working procedures, while high-level models show, for instance, handovers between departments. To provide different views on process models, business process model abstraction has emerged. While several approaches have been proposed, a number of abstraction use case that are both relevant for industry and scientifically challenging are yet to be addressed. In this paper we systematically develop, classify, and consolidate different use cases for business process model abstraction. The reported work is based on a study with BPM users in the health insurance sector and validated with a BPM consultancy company and a large BPM vendor. The identified fifteen abstraction use cases reflect the industry demand. The related work on business process model abstraction is evaluated against the use cases, which leads to a research agenda. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 35 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41782 SN - 978-3-86956-054-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Andreas A1 - Pufahl, Luise A1 - Fahland, Dirk A1 - Weske, Mathias T1 - Modeling and enacting complex data dependencies in business processes N2 - Enacting business processes in process engines requires the coverage of control flow, resource assignments, and process data. While the first two aspects are well supported in current process engines, data dependencies need to be added and maintained manually by a process engineer. Thus, this task is error-prone and time-consuming. In this report, we address the problem of modeling processes with complex data dependencies, e.g., m:n relationships, and their automatic enactment from process models. First, we extend BPMN data objects with few annotations to allow data dependency handling as well as data instance differentiation. Second, we introduce a pattern-based approach to derive SQL queries from process models utilizing the above mentioned extensions. Therewith, we allow automatic enactment of data-aware BPMN process models. We implemented our approach for the Activiti process engine to show applicability. N2 - Die Ausführung von Geschäftsprozessen in Process Engines benötigt Informationen über den Kontrollfluss, die Rollenzuordnungen und die Datenabhängigkeiten. Während die ersten beiden Aspekte bereits automatisiert von Process Engines unterstützt werden, müssen die Datenabhängigkeiten durch einen Prozessingenieur manuell hinzugefügt und gewartet werden. Allerdings ist diese Aufgabe sehr fehleranfällig und zeitintensiv. In diesem Report zeigen wir wie Prozesse mit komplexen Datenabhängigkeiten, z.B. m:n Beziehungen, modelliert und automatisiert ausgeführt werden können. Dazu erweitern wir zuerst BPMN Datenobjekte mit wenigen Annotationen, um das Handling von Datenabhängikeiten sowie die Differenzierung von Datenobjektinstanzen zu ermöglichen. Danach beschreiben wir einen Pattern-basierten Ansatz, um SQL-Queries, unter Nutzung der oben erwähnten Erweiterungen, aus Prozessmodellen abzuleiten. Damit erlauben wir die automatisierte Ausführung von Daten-orientierten BPMN Prozessmodellen. Um die Anwendbarkeit unseres Ansatzen zu demonstieren, implementierten wir ihn für die Process Engine Activiti. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 74 KW - Prozessmodellierung KW - Datenmodellierung KW - Prozessausführung KW - BPMN KW - SQL KW - Process Modeling KW - Data Modeling KW - Process Enactment KW - BPMN KW - SQL Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65103 SN - 978-3-86956-245-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Smirnov, Sergey A1 - Weske, Mathias T1 - The triconnected abstraction of process models N2 - Contents: Artem Polyvanny, Sergey Smirnow, and Mathias Weske The Triconnected Abstraction of Process Models 1 Introduction 2 Business Process Model Abstraction 3 Preliminaries 4 Triconnected Decomposition 4.1 Basic Approach for Process Component Discovery 4.2 SPQR-Tree Decomposition 4.3 SPQR-Tree Fragments in the Context of Process Models 5 Triconnected Abstraction 5.1 Abstraction Rules 5.2 Abstraction Algorithm 6 Related Work and Conclusions T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 26 KW - Hasso-Plattner-Institut KW - Hasso-Plattner-Institute Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32847 SN - 978-3-940793-65-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Smirnov, Sergey A1 - Weidlich, Matthias A1 - Mendling, Jan A1 - Weske, Mathias T1 - Action patterns in business process models N2 - Business process management experiences a large uptake by the industry, and process models play an important role in the analysis and improvement of processes. While an increasing number of staff becomes involved in actual modeling practice, it is crucial to assure model quality and homogeneity along with providing suitable aids for creating models. In this paper we consider the problem of offering recommendations to the user during the act of modeling. Our key contribution is a concept for defining and identifying so-called action patterns - chunks of actions often appearing together in business processes. In particular, we specify action patterns and demonstrate how they can be identified from existing process model repositories using association rule mining techniques. Action patterns can then be used to suggest additional actions for a process model. Our approach is challenged by applying it to the collection of process models from the SAP Reference Model. N2 - Die zunehmende Bedeutung des Geschäftsprozessmanagements führt dazu, dass eine steigende Anzahl von Mitarbeitern eines Unternehmens mit der Erstellung von Prozessmodellen betraut ist. Um trotz dieser Tendenz die Qualität der Prozessmodelle, sowie ihre Homogenität sicherzustellen, sind entsprechende Modellierungshilfen unabdingbar. In diesem Bericht stellen wir einen Ansatz vor, welcher die Prozessmodellierung durch Empfehlungen unterstützt. Jene basieren auf sogenannten Aktionsmustern, welche typische Arbeitsblöcke darstellen. Neben der Definition dieser Aktionsmuster zeigen wir eine Methode zur Identifikation dieser Muster auf. Mittels Techniken der Assoziationsanalyse können die Muster automatisch aus einer Sammlung von Prozessmodellen extrahiert werden. Die Anwendbarkeit unseres Ansatzes wird durch eine Fallstudie auf Basis des SAP Referenzmodells illustriert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 30 Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33586 SN - 978-3-86956-009-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Smirnov, Sergey A1 - Zamani Farahani, Armin A1 - Weske, Mathias T1 - State propagation in abstracted business processes N2 - Business process models are abstractions of concrete operational procedures that occur in the daily business of organizations. To cope with the complexity of these models, business process model abstraction has been introduced recently. Its goal is to derive from a detailed process model several abstract models that provide a high-level understanding of the process. While techniques for constructing abstract models are reported in the literature, little is known about the relationships between process instances and abstract models. In this paper we show how the state of an abstract activity can be calculated from the states of related, detailed process activities as they happen. The approach uses activity state propagation. With state uniqueness and state transition correctness we introduce formal properties that improve the understanding of state propagation. Algorithms to check these properties are devised. Finally, we use behavioral profiles to identify and classify behavioral inconsistencies in abstract process models that might occur, once activity state propagation is used. N2 - Geschäftsprozessmodelle sind Abstraktionen konkreter operationaler Vorgänge, die im täglichen Geschäftsablauf von Organisationen auftreten. Um die Komplexität solcher Modelle zu bewältigen, wurde die Geschäftsprozessmodelabstraktion eingeführt. Ziel ist dabei, von einem detaillierten Prozessmodel mehrere abstrakte Modelle abzuleiten, um so auf einer höheren Abstraktionsstufe ein Verständnis für den Prozess zu bekommen. Während viel in der Literatur über Techniken zur Konstruktion abstrakter Modelle berichtet wurde, ist wenig über die Beziehungen zwischen Prozessinstanzen und abstrakten Modellen bekannt. In dieser Arbeit zeigen wir, wie der Zustand einer abstrakten Aktivität aus den Zuständen ihrer entsprechenden detaillierten Prozessaktivitäten zur Laufzeit berechnet werden kann. Der Ansatz basiert dabei auf der Übertragung des Aktivitätszustands. Mit der Zustandseindeutigkeit und der Korrektheit der Zustandstransitionen führen wir formale Kriterien ein, die das Verständnis der Zustandsübertragung erleichtern. Zudem sind Algorithmen entwickelt worden, um diese Kriterien zu überprüfen. Außerdem nutzen wir Verhaltensprofile um Inkonsistenzen im Verhalten abstrakter Prozessmodelle zu identifizieren und zu klassifizieren, die auftreten können, wenn die Aktivitätszustände gemäß den Regeln abgebildet werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 47 KW - Abstraktion von Geschäftsprozessmodellen KW - Prozessinstanz KW - Propagation von Aktivitätsinstanzzuständen KW - business process model abstraction KW - process instance KW - activity instance state propagation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51480 SN - 978-3-86956-130-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Polyvyanyy, Artem A1 - Smirnov, Sergey A1 - Weske, Mathias T1 - Reducing the complexity of large EPCs N2 - Inhalt: 1 Introduction 2 Motivation and Goal 3 Fundamentals 4 Elementary Abstractions 5 Real World Example 6 Conclusions T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 22 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32959 ER - TY - BOOK A1 - Meyer, Andreas A1 - Weske, Mathias T1 - Weak conformance between process models and synchronized object life cycles N2 - Process models specify behavioral execution constraints between activities as well as between activities and data objects. A data object is characterized by its states and state transitions represented as object life cycle. For process execution, all behavioral execution constraints must be correct. Correctness can be verified via soundness checking which currently only considers control flow information. For data correctness, conformance between a process model and its object life cycles is checked. Current approaches abstract from dependencies between multiple data objects and require fully specified process models although, in real-world process repositories, often underspecified models are found. Coping with these issues, we introduce the concept of synchronized object life cycles and we define a mapping of data constraints of a process model to Petri nets extending an existing mapping. Further, we apply the notion of weak conformance to process models to tell whether each time an activity needs to access a data object in a particular state, it is guaranteed that the data object is in or can reach the expected state. Then, we introduce an algorithm for an integrated verification of control flow correctness and weak data conformance using soundness checking. N2 - Prozessmodelle spezifizieren die Verhaltensabhängigkeiten bezüglich der Ausführung sowohl zwischen Aktivitäten als auch zwischen Aktivitäten und Datenobjekten. Ein Datenobjekt wird über seine Zustände und Zustandsübergänge charakterisiert, welche in einem Objektlebenszyklus abgebildet werden. Für eine fehlerfreie Prozessausführung müssen alle Verhaltensabhängigkeiten korrekt modelliert werden. Eine Standardtechnik zur Korrektheitsüberprüfung ist das Überprüfen auf Soundness. Aktuelle Ansätze berücksichtigen allerdings nur den Kontrollfluss. Datenkorrektheit wird dagegen mittels Conformance zwischen einem Prozessmodel und den verwendeten Objektlebenszyklen überprüft, indem die Existenz eines Zustandsüberganges im Prozessmodell auch im Objektlebenszyklus möglich sein muss. Allerdings abstrahieren aktuelle Ansätze von Abhängigkeiten zwischen mehreren Datenobjekten und erfordern eine vollständige Prozessmodellspezifikation, d.h. das Überspringen oder Zusammenfassen von Zuständen beziehungsweise das Auslagern von Zustandsüberhängen in andere Prozessmodelle ist zum Beispiel nicht vorgesehen. In Prozessmodellsammlungen aus der Praxis sind allerdings oft solche unterspezifizierten Prozessmodelle vorhanden. In diesem Report adressieren wir diese Problemstellungen. Dazu führen wir das Konzept der synchronisierten Objektlebenszyklen ein, erweitern ein Mapping von Prozessmodellen zu Petri Netzen um Datenabhängigkeiten und wenden das Konzept der Weak Conformance auf Prozessmodelle an, um zu entscheiden ob immer wenn eine Aktivität auf ein Datenobjekt zugreift dieses auch im richtigen Zustand vorliegt. Dazu kann das Datenobjekt bereits in diesem Zustand sein oder aber diesen über eine beliebige Anzahl von Zustandsübergängen erreichen. Basierend auf diesen Konzepten führen wir auch einen Algorithmus ein, welcher ein integriertes Überprüfen von Kontrollfluss- und Datenflusskorrektheit unter Nutzung von Soundness-Überprüfungen ermöglicht. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 91 KW - business process management KW - data flow correctness KW - object life cycle synchronization KW - Petri net mapping KW - conformance checking KW - Geschäftsprozessmanagement KW - Datenflusskorrektheit KW - Objektlebenszyklus-Synchronisation KW - Petri net Mapping KW - Conformance Überprüfung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71722 SN - 978-3-86956-303-9 SN - 1613-5652 SN - 2191-1665 IS - 91 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Rogge-Solti, Andreas A1 - Mans, Ronny S. A1 - van der Aalst, Wil M. P. A1 - Weske, Mathias T1 - Repairing event logs using stochastic process models N2 - Companies strive to improve their business processes in order to remain competitive. Process mining aims to infer meaningful insights from process-related data and attracted the attention of practitioners, tool-vendors, and researchers in recent years. Traditionally, event logs are assumed to describe the as-is situation. But this is not necessarily the case in environments where logging may be compromised due to manual logging. For example, hospital staff may need to manually enter information regarding the patient’s treatment. As a result, events or timestamps may be missing or incorrect. In this paper, we make use of process knowledge captured in process models, and provide a method to repair missing events in the logs. This way, we facilitate analysis of incomplete logs. We realize the repair by combining stochastic Petri nets, alignments, and Bayesian networks. We evaluate the results using both synthetic data and real event data from a Dutch hospital. N2 - Unternehmen optimieren ihre Geschäftsprozesse laufend um im kompetitiven Umfeld zu bestehen. Das Ziel von Process Mining ist es, bedeutende Erkenntnisse aus prozessrelevanten Daten zu extrahieren. In den letzten Jahren sorgte Process Mining bei Experten, Werkzeugherstellern und Forschern zunehmend für Aufsehen. Traditionell wird dabei angenommen, dass Ereignisprotokolle die tatsächliche Ist-Situation widerspiegeln. Dies ist jedoch nicht unbedingt der Fall, wenn prozessrelevante Ereignisse manuell erfasst werden. Ein Beispiel hierfür findet sich im Krankenhaus, in dem das Personal Behandlungen meist manuell dokumentiert. Vergessene oder fehlerhafte Einträge in Ereignisprotokollen sind in solchen Fällen nicht auszuschließen. In diesem technischen Bericht wird eine Methode vorgestellt, die das Wissen aus Prozessmodellen und historischen Daten nutzt um fehlende Einträge in Ereignisprotokollen zu reparieren. Somit wird die Analyse unvollständiger Ereignisprotokolle erleichtert. Die Reparatur erfolgt mit einer Kombination aus stochastischen Petri Netzen, Alignments und Bayes'schen Netzen. Die Ergebnisse werden mit synthetischen Daten und echten Daten eines holländischen Krankenhauses evaluiert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 78 KW - Process Mining KW - fehlende Daten KW - stochastische Petri Netze KW - Bayes'sche Netze KW - process mining KW - missing data KW - stochastic Petri nets KW - Bayesian networks Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66797 SN - 978-3-86956-258-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Eid-Sabbagh, Rami-Habib A1 - Hewelt, Marcin A1 - Weske, Mathias T1 - Business process architectures with multiplicities : transformation and correctness N2 - Business processes are instrumental to manage work in organisations. To study the interdependencies between business processes, Business Process Architectures have been introduced. These express trigger and message ow relations between business processes. When we investigate real world Business Process Architectures, we find complex interdependencies, involving multiple process instances. These aspects have not been studied in detail so far, especially concerning correctness properties. In this paper, we propose a modular transformation of BPAs to open nets for the analysis of behavior involving multiple business processes with multiplicities. For this purpose we introduce intermediary nets to portray semantics of multiplicity specifications. We evaluate our approach on a use case from the public sector. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 77 Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66780 SN - 978-3-86956-257-5 PB - Universitätsverlag Potsdam CY - Potsdam ER -