TY - JOUR A1 - Sens, Henriette T1 - Web-Based map generalization tools put to the test: a jABC workflow JF - Process Design for Natural Scientists: an agile model-driven approach N2 - Geometric generalization is a fundamental concept in the digital mapping process. An increasing amount of spatial data is provided on the web as well as a range of tools to process it. This jABC workflow is used for the automatic testing of web-based generalization services like mapshaper.org by executing its functionality, overlaying both datasets before and after the transformation and displaying them visually in a .tif file. Mostly Web Services and command line tools are used to build an environment where ESRI shapefiles can be uploaded, processed through a chosen generalization service and finally visualized in Irfanview. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 175 EP - 185 PB - Springer CY - Berlin ER - TY - THES A1 - Semmo, Amir T1 - Design and implementation of non-photorealistic rendering techniques for 3D geospatial data T1 - Design und Implementierung von nichtfotorealistischen Rendering-Techniken für 3D-Geodaten N2 - Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner. Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units. This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution. Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays. N2 - Geodaten haben sich zu einem natürlichen Bestandteil in einer steigenden Zahl von Informationssystemen und -diensten in der Wirtschaft, Gesellschaft und im Privatleben entwickelt. Virtuelle 3D-Stadt- und Landschaftsmodelle stellen hierbei insbesondere wertvolle Informationsquellen in einer Vielzahl von Anwendungen dar, wie z. B. in der Stadtplanung, Navigation, Touristeninformation und im Katastrophenschutz. Heutzutage werden diese Modelle oftmals detailliert dargestellt, um ein möglichst realistisches Bild zu vermitteln. Jedoch führt eine fotorealistische Darstellung, hinsichtlich einem effektiven Informationstransfer zum Betrachter, nicht zwangsläufig zu einer hohen Bildqualität, welche eine interaktive und kontextsensitive Hervorhebung von wichtigen oder priorisierten Informationen erfordert. Ansätze in der nichtfotorealistischen Bildsynthese berücksichtigen insbesondere die Aufgabe eines Nutzers und Kameraperspektive, um Aspekte der Expressivität, Wahrnehmung und Kommunikation von wichtigen oder priorisierten Informationen zu optimieren. Das Design und die Umsetzung von Techniken der nichtfotorealistischen Bildsynthese für 3D-Geodaten sind jedoch mit einer Vielzahl von Herausforderungen konfrontiert, besonders dann, wenn die Geometrie, das Erscheinungsbild und thematische Daten interaktiv verarbeitet werden müssen. Infolgedessen stellt die programmierbare Architektur und parallelisierte Datenverarbeitung von Grafik-prozessoren eine vielversprechende technische Grundlage zur Verfügung. Diese Arbeit präsentiert Techniken der nichtfotorealistischen Bildsynthese, die den Abstraktionsgrad von Inhalten raumbezogener 3D-Modelle, entsprechend der Nutzerinteraktion und dynamisch-veränderbaren thematischen Informationen, berechnet und auswählt. Hierzu sind die vorgestellten Techniken in die hardwarebeschleunigte Rendering-Pipeline integriert, unter Verwendung der Shader-Technologie von Grafikprozessoren, um eine Echtzeit-Bildsynthese zu gewährleisten. Dabei werden Prinzipien der künstlerischen Darstellung, Aspekte der kartographischen Generalisierung sowie 3D Semiotik verwendet—im Gegensatz zur fotorealistischen Bildsynthese—um illustrative Darstellungen von raumbezogenen Feature-Typ-Entitäten zu synthetisieren, z. B. von Wasserflächen, Gebäuden und Infrastrukturnetzen. Darüber hinaus stellt diese Arbeit ein generisches System vor, welches die Integration verschiedener Grafikstile—fotorealistisch und nichtfotorealistisch—und ihren nahtlosen Übergang, entsprechend von Nutzeraufgaben, Kameraansichten und Bildauflösungen, ermöglicht. Evaluierungen der in dieser Arbeit vorgestellten Techniken haben ihre Bedeutung im Bereich der Informationsvisualisierung von raumbezogenen Daten aufgezeigt, einschließlich Themengebiete der räumlichen Wahrnehmung, Kognition und Kartierung. Darüber hinaus haben Anwendungen im Bereich der illustrativen Visualisierung und Fokus-&-Kontext Visualisierung den potentiellen Einfluss dieser Techniken, in Bezug auf die Optimierung des Informationstransfers zum Nutzer, demonstriert, z. B. hinsichtlich der kognitiven Last, der Integration nichtrealistischer Informationen, der Visualisierung von Unsicherheiten und der Visualisierung auf kleinen Bildschirmen. KW - non-photorealistic rendering KW - geospatial data KW - 3D visualization KW - GPU KW - image processing KW - stylization KW - 3D semiotics KW - cartographic design KW - Nichtfotorealistische Bildsynthese KW - Geodaten KW - 3D Visualisierung KW - GPU KW - Bildverarbeitung KW - Stilisierung KW - 3D Semiotik KW - Kartografisches Design Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99525 ER - TY - THES A1 - Seibel, Andreas T1 - Traceability and model management with executable and dynamic hierarchical megamodels T1 - Traceability und Modell Management mit ausführbaren und dynamischen Megamodellen N2 - Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept. N2 - Die modellgetriebene Softwareentwicklung (MDE) verspricht heutzutage, durch das Verringern der inhärenten Komplexität der klassischen Softwareentwicklung, das Entwickeln von Software zu vereinfachen. Um dies zu erreichen, erhöht MDE das Abstraktions- und Automationsniveau durch die Einbindung domänenspezifischer Modelle (DSMs) und Modelloperationen (z.B. Modelltransformationen oder Codegenerierungen). DSMs sind konform zu domänenspezifischen Modellierungssprachen (DSMLs), die dazu dienen das Abstraktionsniveau der Softwareentwicklung zu erhöhen. Modelloperationen sind essentiell für die Softwareentwicklung da diese den Grad der Automatisierung erhöhen. Dennoch muss MDE mit Komplexitätsdimensionen umgehen die sich grundsätzlich aus der erhöhten sprachlichen und technologischen Heterogenität ergeben. Die erste Komplexitätsdimension ist das Konfigurieren einer Umgebung für MDE. Diese Aktivität setzt sich aus der Implementierung und Selektion von DSMLs sowie Modelloperationen zusammen. Eine solche Aktivität ist gerade durch die Implementierung und Anpassung von Modelloperationen zeitintensiv sowie fehleranfällig. Die zweite Komplexitätsdimension hängt mit der Anwendung von MDE für die eigentliche Softwareentwicklung zusammen. Das Anwenden von MDE ist eine Herausforderung weil eine Menge von heterogenen DSMs, die unterschiedlichen DSMLs unterliegen, erforderlich sind um ein komplexes Softwaresystem zu spezifizieren. Individuelle DSMLs werden verwendet um spezifische Aspekte eines Softwaresystems auf bestimmten Abstraktionsniveaus und aus bestimmten Perspektiven zu beschreiben. Hinzu kommt, dass DSMs sowie DSMLs grundsätzlich nicht unabhängig sind, sondern inhärente Abhängigkeiten besitzen. Diese Abhängigkeiten reflektieren äquivalente Aspekte eines Softwaresystems. Eine Teilmenge dieser Abhängigkeiten reflektieren Anwendungen diverser Modelloperationen, die notwendig sind um den Grad der Automatisierung hoch zu halten. Dies wird erschwert wenn man die erste Komplexitätsdimension hinzuzieht. Aufgrund kontinuierlicher Änderungen der DSMs, müssen alle Arten von Abhängigkeiten, inklusive die Anwendung von Modelloperationen, kontinuierlich verwaltet werden. Dies beinhaltet die Wartung dieser Abhängigkeiten und das sachgerechte (wiederholte) Anwenden von Modelloperationen. Der Beitrag dieser Arbeit ist ein Ansatz, der die Bereiche Traceability und Model Management vereint. Das Erfassen und die automatische Verwaltung von Abhängigkeiten zwischen DSMs unterstützt Traceability, während das (automatische) wiederholte Anwenden von heterogenen Modelloperationen Model Management ermöglicht. Dadurch werden die zuvor erwähnten Herausforderungen der Konfiguration und Anwendung von MDE überwunden. Die negativen Auswirkungen der ersten Komplexitätsdimension können gelindert werden indem Modelloperationen in atomare Einheiten zerlegt werden. Um der implizierten Fragmentierung entgegenzuwirken, erfordert dies allerdings eine nachfolgende Komposition der Modelloperationen. Der Ansatz wird als erweitertes Model Management betrachtet, da ein signifikanter Anteil dieser Arbeit die Kompositionen von heterogenen Modelloperationen behandelt. Unterstützt werden zwei unterschiedliche Arten von Kompositionen. Datenfluss-Kompositionen werden verwendet, um Netzwerke von heterogenen Modelloperationen zu beschreiben, die nur durch das Teilen von Ein- und Ausgabe DSMs komponiert werden. Kontext-Kompositionen bedienen sich eines Konzepts, das von deklarativen Modelltransformationen bekannt ist. Dies ermöglicht die Komposition von unabhängigen Transformationsregeln auf unterschiedlichsten Detailebenen. Die in dieser Arbeit eingeführten Kontext-Kompositionen bieten die Möglichkeit eine Menge von unterschiedlichsten Abhängigkeiten als Kontext für eine Komposition zu verwenden -- unabhängig davon ob diese Abhängigkeit eine Modelloperation repräsentiert. Zusätzlich müssen die Modelloperationen, die komponiert werden, selber keine Kompositionsaspekte implementieren, was deren Wiederverwendbarkeit erhöht. Realisiert wird dieser Ansatz durch einen Formalismus der Executable and Dynamic Hierarchical Megamodel genannt wird und auf der originalen Idee der Megamodelle basiert. Auf Basis dieses Formalismus' sind die Konzepte Traceability (hier Localization) und Model Management (hier Execution) umgesetzt. KW - Traceability KW - Modell Management KW - Megamodell KW - Modellgetriebene Entwicklung KW - Komposition KW - Traceability KW - Model Management KW - Megamodel KW - Model-Driven Engineering KW - Composition Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64222 ER - TY - CHAP A1 - Seegerer, Stefan A1 - Romeike, Ralf A1 - Tillmann, Alexander A1 - Krömker, Detlef A1 - Horn, Florian A1 - Gattinger, Thorsten A1 - Weicker, Karsten A1 - Schmitz, Dennis A1 - Moldt, Daniel A1 - Röpke, René A1 - Larisch, Kathrin A1 - Schroeder, Ulrik A1 - Keverpütz, Claudia A1 - Küppers, Bastian A1 - Striewe, Michael A1 - Kramer, Matthias A1 - Grillenberger, Andreas A1 - Frede, Christiane A1 - Knobelsdorf, Maria A1 - Greven, Christoph ED - Bergner, Nadine ED - Röpke, René ED - Schroeder, Ulrik ED - Krömker, Detlef T1 - Hochschuldidaktik der Informatik HDI 2018 BT - 8. Fachtagung des GI-Fachbereichs Informatik und Ausbildung/Didaktik der Informatik ; 12.-13. September 2018 an der Goethe-Universität Frankfurt am Main T2 - Commentarii informaticae didacticae (CID) N2 - Die 8. Fachtagung für Hochschuldidaktik der Informatik (HDI) fand im September 2018 zusammen mit der Deutschen E-Learning Fachtagung Informatik (DeLFI) unter dem gemeinsamen Motto „Digitalisierungswahnsinn? - Wege der Bildungstransformationen“ in Frankfurt statt. Dabei widmet sich die HDI allen Fragen der informatischen Bildung im Hochschulbereich. Schwerpunkte bildeten in diesem Jahr u. a.: - Analyse der Inhalte und anzustrebenden Kompetenzen in Informatikveranstaltungen - Programmieren lernen & Einstieg in Softwareentwicklung - Spezialthemen: Data Science, Theoretische Informatik und Wissenschaftliches Arbeiten Die Fachtagung widmet sich ausgewählten Fragestellungen dieser Themenkomplexe, die durch Vorträge ausgewiesener Experten und durch eingereichte Beiträge intensiv behandelt werden. T3 - Commentarii informaticae didacticae (CID) - 12 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-413542 SN - 978-3-86956-435-7 SN - 1868-0844 SN - 2191-1940 IS - 12 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Schütt, Christine T1 - Identification of differentially expressed genes JF - Process design for natural scientists: an agile model-driven approach N2 - With the jABC it is possible to realize workflows for numerous questions in different fields. The goal of this project was to create a workflow for the identification of differentially expressed genes. This is of special interest in biology, for it gives the opportunity to get a better insight in cellular changes due to exogenous stress, diseases and so on. With the knowledge that can be derived from the differentially expressed genes in diseased tissues, it becomes possible to find new targets for treatment. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 127 EP - 139 PB - Springer CY - Berlin ER - TY - JOUR A1 - Schulze, Gunnar T1 - Workflow for rapid metagenome analysis JF - Process design for natural scientists: an agile model-driven approach N2 - Analyses of metagenomes in life sciences present new opportunities as well as challenges to the scientific community and call for advanced computational methods and workflows. The large amount of data collected from samples via next-generation sequencing (NGS) technologies render manual approaches to sequence comparison and annotation unsuitable. Rather, fast and efficient computational pipelines are needed to provide comprehensive statistics and summaries and enable the researcher to choose appropriate tools for more specific analyses. The workflow presented here builds upon previous pipelines designed for automated clustering and annotation of raw sequence reads obtained from next-generation sequencing technologies such as 454 and Illumina. Employing specialized algorithms, the sequence reads are processed at three different levels. First, raw reads are clustered at high similarity cutoff to yield clusters which can be exported as multifasta files for further analyses. Independently, open reading frames (ORFs) are predicted from raw reads and clustered at two strictness levels to yield sets of non-redundant sequences and ORF families. Furthermore, single ORFs are annotated by performing searches against the Pfam database Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 88 EP - 100 PB - Springer CY - Berlin ER - TY - THES A1 - Schulz-Hanke, Christian T1 - BCH Codes mit kombinierter Korrektur und Erkennung T1 - BCH codes with combined error correction and detection N2 - BCH Codes mit kombinierter Korrektur und Erkennung In dieser Arbeit wird auf Grundlage des BCH Codes untersucht, wie eine Fehlerkorrektur mit einer Erkennung höherer Fehleranzahlen kombiniert werden kann. Mit dem Verfahren der 1-Bit Korrektur mit zusätzlicher Erkennung höherer Fehler wurde ein Ansatz entwickelt, welcher die Erkennung zusätzlicher Fehler durch das parallele Lösen einfacher Gleichungen der Form s_x = s_1^x durchführt. Die Anzahl dieser Gleichungen ist linear zu der Anzahl der zu überprüfenden höheren Fehler. In dieser Arbeit wurde zusätzlich für bis zu 4-Bit Korrekturen mit zusätzlicher Erkennung höherer Fehler ein weiterer allgemeiner Ansatz vorgestellt. Dabei werden parallel für alle korrigierbaren Fehleranzahlen spekulative Fehlerkorrekturen durchgeführt. Aus den bestimmten Fehlerstellen werden spekulative Syndromkomponenten erzeugt, durch welche die Fehlerstellen bestätigt und höhere erkennbare Fehleranzahlen ausgeschlossen werden können. Die vorgestellten Ansätze unterscheiden sich von dem in entwickelten Ansatz, bei welchem die Anzahl der Fehlerstellen durch die Berechnung von Determinanten in absteigender Reihenfolge berechnet wird, bis die erste Determinante 0 bildet. Bei dem bekannten Verfahren ist durch die Berechnung der Determinanten eine faktorielle Anzahl an Berechnungen in Relation zu der Anzahl zu überprüfender Fehler durchzuführen. Im Vergleich zu dem bekannten sequentiellen Verfahrens nach Berlekamp Massey besitzen die Berechnungen im vorgestellten Ansatz simple Gleichungen und können parallel durchgeführt werden.Bei dem bekannten Verfahren zur parallelen Korrektur von 4-Bit Fehlern ist eine Gleichung vierten Grades im GF(2^m) zu lösen. Dies erfolgt, indem eine Hilfsgleichung dritten Grades und vier Gleichungen zweiten Grades parallel gelöst werden. In der vorliegenden Arbeit wurde gezeigt, dass sich eine Gleichung zweiten Grades einsparen lässt, wodurch sich eine Vereinfachung der Hardware bei einer parallelen Realisierung der 4-Bit Korrektur ergibt. Die erzielten Ergebnisse wurden durch umfangreiche Simulationen in Software und Hardwareimplementierungen überprüft. N2 - Based on the BCH code, this thesis investigates how an BCH error correction approach can be combined with an additional detection of higher numbers of errors. With the method of 1-bit correction with additional detection of higher errors, an approach is developed that performs the additional detection of higher errors by solving simple equations of the form s_x = s_1^x in parallel. The number of these equations is in a linear relationship to the number of higher errors to be checked. In this thesis, a generalization for such an approach is presented for up to 4-bit correction with additional detection of higher errors. Therefore, a speculative error correction is carried out in parallel fashion for each correctable error count. For each of the generated speculative error positions, a speculative syndrome is generated, which can be used to confirm the error positions and exclude detectable errors of higher number. The presented approach differs from the approach developed in, in which the number of errors is determined by calculating specific determinants in descending order until the first determinant is 0. In the well-known method, the calculation of the determinants involves performing a factorial number of calculations in relation to the number of errors to be checked. Compared to the well-known sequential method according to Berlekamp Massey, the calculations in the presented approach can be performed by solving simple equations and can be carried out in parallel. In the well-known method for parallel correction of 4-bit errors, an equation of fourth degree in the GF(2^m) has to be solved. This is done by solving a third-degree auxiliary equation and four second-degree equations in parallel. In the present thesis it was shown that a second-degree equation can be saved, resulting in a simplification of the hardware for a parallel realization of the 4-bit correction. The results obtained were verified by extensive simulations in software and hardware implementations. KW - Code KW - BCH KW - Fehlerkorrektur KW - Fehlererkennung KW - linearer Code KW - BCH KW - code KW - error correction KW - error detection KW - linear code Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617943 ER - TY - THES A1 - Scholz, Matthias T1 - Approaches to analyse and interpret biological profile data T1 - Methoden zur Analyse und Interpretation biologischer Profildaten N2 - Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics. N2 - Fortschritte in der Biotechnologie ermöglichen es, eine immer größere Anzahl von Molekülen in einer Zelle gleichzeitig zu erfassen. Das betrifft sowohl die Expressionswerte tausender oder zehntausender Gene als auch die Konzentrationswerte von Metaboliten oder Proteinen. Diese Profildaten verschiedener Zeitpunkte oder unterschiedlicher experimenteller Bedingungen (z.B. unter Stressbedingungen wie Hitze oder Trockenheit) zeigen, wie sich das biologische Experiment auf molekularer Ebene widerspiegelt. Diese Information kann genutzt werden, um molekulare Abläufe besser zu verstehen und um Moleküle oder Molekül-Kombinationen zu bestimmen, die für bestimmte biologische Zustände (z.B.: Krankheit) charakteristisch sind. Die Arbeit zeigt die Möglichkeiten von Komponenten-Extraktions-Algorithmen zur Bestimmung der wesentlichen Faktoren, die einen Einfluss auf die beobachteten Daten ausübten. Das können sowohl die erwarteten experimentellen Faktoren wie Zeit oder Temperatur sein als auch unerwartete Faktoren wie technische Einflüsse oder sogar unerwartete biologische Vorgänge. Unter der Extraktion von Komponenten versteht man die Reduzierung dieser stark hoch-dimensionalen Daten auf wenige neue Variablen, die eine Kombination aus allen ursprünglichen Variablen darstellen und als Komponenten bezeichnet werden. Die Standard-Methode für diesen Zweck ist die Hauptkomponentenanalyse (PCA). Es wird gezeigt, dass - im Vergleich zur nur die Varianz maximierenden PCA - moderne Methoden wie die Unabhängige Komponentenanalyse (ICA) für die Analyse molekularer Datensätze besser geeignet sind. Die Unabhängigkeit von Komponenten in der ICA entspricht viel besser unserer Annahme individueller (unabhängiger) Faktoren, die einen Einfluss auf die Daten ausüben. Dieser Vorteil der ICA wird anhand eines Kreuzungsexperiments mit der Modell-Pflanze Arabidopsis thaliana (Ackerschmalwand) demonstriert. Die experimentellen Faktoren konnten dabei gut identifiziert werden und ICA erkannte sogar zusätzlich einen technischen Störfaktor. Bei kontinuierlichen Beobachtungen wie in Zeitexperimenten zeigen die Daten jedoch häufig eine nichtlineare Verteilung. Für die Analyse dieser nichtlinearen Daten wird eine nichtlinear erweiterte Methode der PCA angewandt. Diese nichtlineare PCA (NLPCA) basiert auf einem neuronalen Netzwerk-Algorithmus. Der Algorithmus wurde für die Anwendung auf unvollständigen molekularen Daten erweitert. Dies ermöglicht es, die fehlenden Werte zu schätzen. Die Fähigkeit der nichtlinearen PCA zur Bestimmung nichtlinearer Faktoren wird anhand eines Kältestress-Experiments mit Arabidopsis thaliana demonstriert. Die Ergebnisse aus der Komponentenanalyse können zur Erstellung molekularer Netzwerk-Modelle genutzt werden. Da sie funktionelle Abhängigkeiten berücksichtigen, werden sie als Funktionale Netzwerke bezeichnet. Anhand der Kältestress-Daten wird demonstriert, dass solche funktionalen Netzwerke geeignet sind, biologische Prozesse zu visualisieren und dadurch die molekularen Dynamiken aufzuzeigen. KW - Bioinformatik KW - Hauptkomponentenanalyse KW - Unabhängige Komponentenanalyse KW - Neuronales Netz KW - Maschinelles Lernen KW - Fehlende Daten KW - Ackerschmalwand KW - nichtlineare PCA (NLPCA) KW - molekulare Netzwerke KW - nonlinear PCA (NLPCA) KW - molecular networks Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7839 ER - TY - THES A1 - Schnjakin, Maxim T1 - Cloud-RAID BT - eine Methode zur Bereitstellung zuverlässiger Speicherressourcen in öffentlichen Clouds Y1 - 2014 ER - TY - THES A1 - Schneider, Jan Niklas T1 - Computational approaches for emotion research T1 - Computergestützte Methoden für die Emotionsforschung N2 - Emotionen sind ein zentrales Element menschlichen Erlebens und spielen eine wichtige Rolle bei der Entscheidungsfindung. Diese Dissertation identifiziert drei methodische Probleme der aktuellen Emotionsforschung und zeigt auf, wie diese mittels computergestützter Methoden gelöst werden können. Dieser Ansatz wird in drei Forschungsprojekten demonstriert, die die Entwicklung solcher Methoden sowie deren Anwendung auf konkrete Forschungsfragen beschreiben. Das erste Projekt beschreibt ein Paradigma welches es ermöglicht, die subjektive und objektive Schwierigkeit der Emotionswahrnehmung zu messen. Darüber hinaus ermöglicht es die Verwendung einer beliebigen Anzahl von Emotionskategorien im Vergleich zu den üblichen sechs Kategorien der Basisemotionen. Die Ergebnisse deuten auf eine Zunahme der Schwierigkeiten bei der Wahrnehmung von Emotionen mit zunehmendem Alter der Darsteller hin und liefern Hinweise darauf, dass junge Erwachsene, ältere Menschen und Männer ihre Schwierigkeit bei der Wahrnehmung von Emotionen unterschätzen. Weitere Analysen zeigten eine geringe Relevanz personenbezogener Variablen und deuteten darauf hin, dass die Schwierigkeit der Emotionswahrnehmung vornehmlich durch die Ausprägung der Wertigkeit des Ausdrucks bestimmt wird. Das zweite Projekt zeigt am Beispiel von Arousal, einem etablierten, aber vagen Konstrukt der Emotionsforschung, wie Face-Tracking-Daten dazu genutzt werden können solche Konstrukte zu schärfen. Es beschreibt, wie aus Face-Tracking-Daten Maße für die Entfernung, Geschwindigkeit und Beschleunigung von Gesichtsausdrücken berechnet werden können. Das Projekt untersuchte wie diesen Maße mit der Arousal-Wahrnehmung in Menschen mit und ohne Autismus zusammenhängen. Der Abstand zum Neutralgesicht war prädiktiv für die Arousal-Bewertungen in beiden Gruppen. Die Ergebnisse deuten auf eine qualitativ ähnliche Wahrnehmung von Arousal für Menschen mit und ohne Autismus hin. Im dritten Projekt stellen wir die Partial-Least-Squares-Analyse als allgemeine Methode vor, um eine optimale Repräsentation zur Verknüpfung zweier hochdimensionale Datensätze zu finden. Das Projekt demonstriert die Anwendbarkeit dieser Methode in der Emotionsforschung anhand der Frage nach Unterschieden in der Emotionswahrnehmung zwischen Männern und Frauen. Wir konnten zeigen, dass die emotionale Wahrnehmung von Frauen systematisch mehr Varianz der Gesichtsausdrücke erfasst und dass signifikante Unterschiede in der Art und Weise bestehen, wie Frauen und Männer einige Gesichtsausdrücke wahrnehmen. Diese konnten wir als dynamische Gesichtsausdrücke visualisieren. Um die Anwendung der entwickelten Methode für die Forschungsgemeinschaft zu erleichtern, wurde ein Software-Paket für die Statistikumgebung R geschrieben. Zudem wurde eine Website entwickelt (thisemotiondoesnotexist.com), die es Besuchern erlaubt, ein Partial-Least-Squares-Modell von Emotionsbewertungen und Face-Tracking-Daten interaktiv zu erkunden, um die entwickelte Methode zu verbreiten und ihren Nutzen für die Emotionsforschung zu illustrieren. N2 - Emotions are a central element of human experience. They occur with high frequency in everyday life and play an important role in decision making. However, currently there is no consensus among researchers on what constitutes an emotion and on how emotions should be investigated. This dissertation identifies three problems of current emotion research: the problem of ground truth, the problem of incomplete constructs and the problem of optimal representation. I argue for a focus on the detailed measurement of emotion manifestations with computer-aided methods to solve these problems. This approach is demonstrated in three research projects, which describe the development of methods specific to these problems as well as their application to concrete research questions. The problem of ground truth describes the practice to presuppose a certain structure of emotions as the a priori ground truth. This determines the range of emotion descriptions and sets a standard for the correct assignment of these descriptions. The first project illustrates how this problem can be circumvented with a multidimensional emotion perception paradigm which stands in contrast to the emotion recognition paradigm typically employed in emotion research. This paradigm allows to calculate an objective difficulty measure and to collect subjective difficulty ratings for the perception of emotional stimuli. Moreover, it enables the use of an arbitrary number of emotion stimuli categories as compared to the commonly used six basic emotion categories. Accordingly, we collected data from 441 participants using dynamic facial expression stimuli from 40 emotion categories. Our findings suggest an increase in emotion perception difficulty with increasing actor age and provide evidence to suggest that young adults, the elderly and men underestimate their emotion perception difficulty. While these effects were predicted from the literature, we also found unexpected and novel results. In particular, the increased difficulty on the objective difficulty measure for female actors and observers stood in contrast to reported findings. Exploratory analyses revealed low relevance of person-specific variables for the prediction of emotion perception difficulty, but highlighted the importance of a general pleasure dimension for the ease of emotion perception. The second project targets the problem of incomplete constructs which relates to vaguely defined psychological constructs on emotion with insufficient ties to tangible manifestations. The project exemplifies how a modern data collection method such as face tracking data can be used to sharpen these constructs on the example of arousal, a long-standing but fuzzy construct in emotion research. It describes how measures of distance, speed and magnitude of acceleration can be computed from face tracking data and investigates their intercorrelations. We find moderate to strong correlations among all measures of static information on one hand and all measures of dynamic information on the other. The project then investigates how self-rated arousal is tied to these measures in 401 neurotypical individuals and 19 individuals with autism. Distance to the neutral face was predictive of arousal ratings in both groups. Lower mean arousal ratings were found for the autistic group, but no difference in correlation of the measures and arousal ratings could be found between groups. Results were replicated in a high autistic traits group consisting of 41 participants. The findings suggest a qualitatively similar perception of arousal for individuals with and without autism. No correlations between valence ratings and any of the measures could be found which emphasizes the specificity of our tested measures for the construct of arousal. The problem of optimal representation refers to the search for the best representation of emotions and the assumption that there is a one-fits-all solution. In the third project we introduce partial least squares analysis as a general method to find an optimal representation to relate two high-dimensional data sets to each other. The project demonstrates its applicability to emotion research on the question of emotion perception differences between men and women. The method was used with emotion rating data from 441 participants and face tracking data computed on 306 videos. We found quantitative as well as qualitative differences in the perception of emotional facial expressions between these groups. We showed that women’s emotional perception systematically captured more of the variance in facial expressions. Additionally, we could show that significant differences exist in the way that women and men perceive some facial expressions which could be visualized as concrete facial expression sequences. These expressions suggest differing perceptions of masked and ambiguous facial expressions between the sexes. In order to facilitate use of the developed method by the research community, a package for the statistical environment R was written. Furthermore, to call attention to the method and its usefulness for emotion research, a website was designed that allows users to explore a model of emotion ratings and facial expression data in an interactive fashion. KW - facial expression KW - emotion KW - perception KW - face tracking KW - perception differences KW - emotion representation KW - Gesichtsausdruck KW - Emotionen KW - Wahrnehmung KW - Wahrnehmungsunterschiede KW - computational methods KW - emotion research KW - computergestützte Methoden KW - Emotionsforschung KW - arousal perception KW - objective difficulty KW - Wahrnehmung von Arousal KW - Objektive Schwierigkeit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459275 ER - TY - THES A1 - Schindler, Sven T1 - Honeypot Architectures for IPv6 Networks Y1 - 2016 ER - TY - JOUR A1 - Schell, Timon A1 - Schwill, Andreas T1 - „Es ist kompliziert, alles inklusive Privatleben unter einen Hut zu bekommen“ BT - Eine Studie zu Nutzen und Schaden von Arbeitsverhältnissen für das Informatikstudium JF - Hochschuldidaktik Informatik HDI 2021 (Commentarii informaticae didacticae) N2 - Eine übliche Erzählung verknüpft lange Studienzeiten und hohe Abbrecherquoten im Informatikstudium zum einen mit der sehr gut bezahlten Nebentätigkeit von Studierenden in der Informatikbranche, die deutlich studienzeitverlängernd sei; zum anderen werde wegen des hohen Bedarfs an Informatikern ein formeller Studienabschluss von den Studierenden häufig als entbehrlich betrachtet und eine Karriere in der Informatikbranche ohne abgeschlossenes Studium begonnen. In dieser Studie, durchgeführt an der Universität Potsdam, untersuchen wir, wie viele Informatikstudierende neben dem Studium innerhalb und außerhalb der Informatikbranche arbeiten, welche Erwartungen sie neben der Bezahlung damit verbinden und wie sich die Tätigkeit auf ihr Studium und ihre spätere berufliche Perspektive auswirkt. Aus aktuellem Anlass interessieren uns auch die Auswirkungen der Covid-19-Pandemie auf die Arbeitstätigkeiten der Informatikstudierenden. KW - Informatikstudium KW - Studienabbrecher KW - Studentenjobs KW - Studiendauer Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613882 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 SP - 53 EP - 71 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Scheele, Lasse T1 - Location analysis for placing artificial reefs JF - Process design for natural scientists: an agile model-driven approach N2 - Location analyses are among the most common tasks while working with spatial data and geographic information systems. Automating the most frequently used procedures is therefore an important aspect of improving their usability. In this context, this project aims to design and implement a workflow, providing some basic tools for a location analysis. For the implementation with jABC, the workflow was applied to the problem of finding a suitable location for placing an artificial reef. For this analysis three parameters (bathymetry, slope and grain size of the ground material) were taken into account, processed, and visualized with the The Generic Mapping Tools (GMT), which were integrated into the workflow as jETI-SIBs. The implemented workflow thereby showed that the approach to combine jABC with GMT resulted in an user-centric yet user-friendly tool with high-quality cartographic outputs. Y1 - 2014 SN - 978-3-662-45005-5 SN - 1865-0929 IS - 500 SP - 216 EP - 228 PB - Springer CY - Berlin ER - TY - JOUR A1 - Schaub, Torsten A1 - Woltran, Stefan T1 - Answer set programming unleashed! JF - Künstliche Intelligenz N2 - Answer Set Programming faces an increasing popularity for problem solving in various domains. While its modeling language allows us to express many complex problems in an easy way, its solving technology enables their effective resolution. In what follows, we detail some of the key factors of its success. Answer Set Programming [ASP; Brewka et al. Commun ACM 54(12):92–103, (2011)] is seeing a rapid proliferation in academia and industry due to its easy and flexible way to model and solve knowledge-intense combinatorial (optimization) problems. To this end, ASP offers a high-level modeling language paired with high-performance solving technology. As a result, ASP systems provide out-off-the-box, general-purpose search engines that allow for enumerating (optimal) solutions. They are represented as answer sets, each being a set of atoms representing a solution. The declarative approach of ASP allows a user to concentrate on a problem’s specification rather than the computational means to solve it. This makes ASP a prime candidate for rapid prototyping and an attractive tool for teaching key AI techniques since complex problems can be expressed in a succinct and elaboration tolerant way. This is eased by the tuning of ASP’s modeling language to knowledge representation and reasoning (KRR). The resulting impact is nicely reflected by a growing range of successful applications of ASP [Erdem et al. AI Mag 37(3):53–68, 2016; Falkner et al. Industrial applications of answer set programming. K++nstliche Intelligenz (2018)] Y1 - 2018 U6 - https://doi.org/10.1007/s13218-018-0550-z SN - 0933-1875 SN - 1610-1987 VL - 32 IS - 2-3 SP - 105 EP - 108 PB - Springer CY - Heidelberg ER - TY - GEN A1 - Schaub, Torsten A1 - Woltran, Stefan T1 - Special issue on answer set programming T2 - Künstliche Intelligenz Y1 - 2018 U6 - https://doi.org/10.1007/s13218-018-0554-8 SN - 0933-1875 SN - 1610-1987 VL - 32 IS - 2-3 SP - 101 EP - 103 PB - Springer CY - Heidelberg ER - TY - THES A1 - Schacht, Alexander T1 - Konzepte und Strategien mobiler Plattformen zur Erfassung und Anlayse von Vitalparametern in heterogenen Telemonotoring-Systemen Y1 - 2014 ER - TY - THES A1 - Sawade, Christoph T1 - Active evaluation of predictive models T1 - Aktive Evaluierung von Vorhersagemodellen N2 - The field of machine learning studies algorithms that infer predictive models from data. Predictive models are applicable for many practical tasks such as spam filtering, face and handwritten digit recognition, and personalized product recommendation. In general, they are used to predict a target label for a given data instance. In order to make an informed decision about the deployment of a predictive model, it is crucial to know the model’s approximate performance. To evaluate performance, a set of labeled test instances is required that is drawn from the distribution the model will be exposed to at application time. In many practical scenarios, unlabeled test instances are readily available, but the process of labeling them can be a time- and cost-intensive task and may involve a human expert. This thesis addresses the problem of evaluating a given predictive model accurately with minimal labeling effort. We study an active model evaluation process that selects certain instances of the data according to an instrumental sampling distribution and queries their labels. We derive sampling distributions that minimize estimation error with respect to different performance measures such as error rate, mean squared error, and F-measures. An analysis of the distribution that governs the estimator leads to confidence intervals, which indicate how precise the error estimation is. Labeling costs may vary across different instances depending on certain characteristics of the data. For instance, documents differ in their length, comprehensibility, and technical requirements; these attributes affect the time a human labeler needs to judge relevance or to assign topics. To address this, the sampling distribution is extended to incorporate instance-specific costs. We empirically study conditions under which the active evaluation processes are more accurate than a standard estimate that draws equally many instances from the test distribution. We also address the problem of comparing the risks of two predictive models. The standard approach would be to draw instances according to the test distribution, label the selected instances, and apply statistical tests to identify significant differences. Drawing instances according to an instrumental distribution affects the power of a statistical test. We derive a sampling procedure that maximizes test power when used to select instances, and thereby minimizes the likelihood of choosing the inferior model. Furthermore, we investigate the task of comparing several alternative models; the objective of an evaluation could be to rank the models according to the risk that they incur or to identify the model with lowest risk. An experimental study shows that the active procedure leads to higher test power than the standard test in many application domains. Finally, we study the problem of evaluating the performance of ranking functions, which are used for example for web search. In practice, ranking performance is estimated by applying a given ranking model to a representative set of test queries and manually assessing the relevance of all retrieved items for each query. We apply the concepts of active evaluation and active comparison to ranking functions and derive optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs. N2 - Maschinelles Lernen befasst sich mit Algorithmen zur Inferenz von Vorhersagemodelle aus komplexen Daten. Vorhersagemodelle sind Funktionen, die einer Eingabe – wie zum Beispiel dem Text einer E-Mail – ein anwendungsspezifisches Zielattribut – wie „Spam“ oder „Nicht-Spam“ – zuweisen. Sie finden Anwendung beim Filtern von Spam-Nachrichten, bei der Text- und Gesichtserkennung oder auch bei der personalisierten Empfehlung von Produkten. Um ein Modell in der Praxis einzusetzen, ist es notwendig, die Vorhersagequalität bezüglich der zukünftigen Anwendung zu schätzen. Für diese Evaluierung werden Instanzen des Eingaberaums benötigt, für die das zugehörige Zielattribut bekannt ist. Instanzen, wie E-Mails, Bilder oder das protokollierte Nutzerverhalten von Kunden, stehen häufig in großem Umfang zur Verfügung. Die Bestimmung der zugehörigen Zielattribute ist jedoch ein manueller Prozess, der kosten- und zeitaufwendig sein kann und mitunter spezielles Fachwissen erfordert. Ziel dieser Arbeit ist die genaue Schätzung der Vorhersagequalität eines gegebenen Modells mit einer minimalen Anzahl von Testinstanzen. Wir untersuchen aktive Evaluierungsprozesse, die mit Hilfe einer Wahrscheinlichkeitsverteilung Instanzen auswählen, für die das Zielattribut bestimmt wird. Die Vorhersagequalität kann anhand verschiedener Kriterien, wie der Fehlerrate, des mittleren quadratischen Verlusts oder des F-measures, bemessen werden. Wir leiten die Wahrscheinlichkeitsverteilungen her, die den Schätzfehler bezüglich eines gegebenen Maßes minimieren. Der verbleibende Schätzfehler lässt sich anhand von Konfidenzintervallen quantifizieren, die sich aus der Verteilung des Schätzers ergeben. In vielen Anwendungen bestimmen individuelle Eigenschaften der Instanzen die Kosten, die für die Bestimmung des Zielattributs anfallen. So unterscheiden sich Dokumente beispielsweise in der Textlänge und dem technischen Anspruch. Diese Eigenschaften beeinflussen die Zeit, die benötigt wird, mögliche Zielattribute wie das Thema oder die Relevanz zuzuweisen. Wir leiten unter Beachtung dieser instanzspezifischen Unterschiede die optimale Verteilung her. Die entwickelten Evaluierungsmethoden werden auf verschiedenen Datensätzen untersucht. Wir analysieren in diesem Zusammenhang Bedingungen, unter denen die aktive Evaluierung genauere Schätzungen liefert als der Standardansatz, bei dem Instanzen zufällig aus der Testverteilung gezogen werden. Eine verwandte Problemstellung ist der Vergleich von zwei Modellen. Um festzustellen, welches Modell in der Praxis eine höhere Vorhersagequalität aufweist, wird eine Menge von Testinstanzen ausgewählt und das zugehörige Zielattribut bestimmt. Ein anschließender statistischer Test erlaubt Aussagen über die Signifikanz der beobachteten Unterschiede. Die Teststärke hängt von der Verteilung ab, nach der die Instanzen ausgewählt wurden. Wir bestimmen die Verteilung, die die Teststärke maximiert und damit die Wahrscheinlichkeit minimiert, sich für das schlechtere Modell zu entscheiden. Des Weiteren geben wir eine Möglichkeit an, den entwickelten Ansatz für den Vergleich von mehreren Modellen zu verwenden. Wir zeigen empirisch, dass die aktive Evaluierungsmethode im Vergleich zur zufälligen Auswahl von Testinstanzen in vielen Anwendungen eine höhere Teststärke aufweist. Im letzten Teil der Arbeit werden das Konzept der aktiven Evaluierung und das des aktiven Modellvergleichs auf Rankingprobleme angewendet. Wir leiten die optimalen Verteilungen für das Schätzen der Qualitätsmaße Discounted Cumulative Gain und Expected Reciprocal Rank her. Eine empirische Studie zur Evaluierung von Suchmaschinen zeigt, dass die neu entwickelten Verfahren signifikant genauere Schätzungen der Rankingqualität liefern als die untersuchten Referenzverfahren. KW - Aktive Evaluierung KW - Vorhersagemodelle KW - Maschinelles Lernen KW - Fehlerschätzung KW - Statistische Tests KW - Active Evaluation KW - Predictive Models KW - Machine Learning KW - Error Estimation KW - Statistical Tests Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65583 SN - 978-3-86956-255-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Saleh, Eyad T1 - Securing Multi-tenant SaaS Environments N2 - Software-as-a-Service (SaaS) offers several advantages to both service providers and users. Service providers can benefit from the reduction of Total Cost of Ownership (TCO), better scalability, and better resource utilization. On the other hand, users can use the service anywhere and anytime, and minimize upfront investment by following the pay-as-you-go model. Despite the benefits of SaaS, users still have concerns about the security and privacy of their data. Due to the nature of SaaS and the Cloud in general, the data and the computation are beyond the users' control, and hence data security becomes a vital factor in this new paradigm. Furthermore, in multi-tenant SaaS applications, the tenants become more concerned about the confidentiality of their data since several tenants are co-located onto a shared infrastructure. To address those concerns, we start protecting the data from the provisioning process by controlling how tenants are being placed in the infrastructure. We present a resource allocation algorithm designed to minimize the risk of co-resident tenants called SecPlace. It enables the SaaS provider to control the resource (i.e., database instance) allocation process while taking into account the security of tenants as a requirement. Due to the design principles of the multi-tenancy model, tenants follow some degree of sharing on both application and infrastructure levels. Thus, strong security-isolation should be present. Therefore, we develop SignedQuery, a technique that prevents one tenant from accessing others' data. We use the Signing Concept to create a signature that is used to sign the tenant's request, then the server can verifies the signature and recognizes the requesting tenant, and hence ensures that the data to be accessed is belonging to the legitimate tenant. Finally, Data confidentiality remains a critical concern due to the fact that data in the Cloud is out of users' premises, and hence beyond their control. Cryptography is increasingly proposed as a potential approach to address such a challenge. Therefore, we present SecureDB, a system designed to run SQL-based applications over an encrypted database. SecureDB captures the schema design and analyzes it to understand the internal structure of the data (i.e., relationships between the tables and their attributes). Moreover, we determine the appropriate partialhomomorphic encryption scheme for each attribute where computation is possible even when the data is encrypted. To evaluate our work, we conduct extensive experiments with di↵erent settings. The main use case in our work is a popular open source HRM application, called OrangeHRM. The results show that our multi-layered approach is practical, provides enhanced security and isolation among tenants, and have a moderate complexity in terms of processing encrypted data. Y1 - 2016 ER - TY - THES A1 - Sadr-Azodi, Amir Shahab T1 - Towards Real-time SIEM-based Network monitoring and Intrusion Detection through Advanced Event Normalization Y1 - 2015 ER - TY - CHAP A1 - Rolf, Arno A1 - Berges, Marc A1 - Hubwieser, Peter A1 - Kehrer, Timo A1 - Kelter, Udo A1 - Romeike, Ralf A1 - Frenkel, Marcus A1 - Karsten, Weicker A1 - Reinhardt, Wolfgang A1 - Mascher, Michael A1 - Gül, Senol A1 - Magenheim, Johannes A1 - Raimer, Stephan A1 - Diethelm, Ira A1 - Dünnebier, Malte A1 - Gabor, Kiss A1 - Susanne, Boll A1 - Rolf, Meinhardt A1 - Gronewold, Sabine A1 - Krekeler, Larissa A1 - Jahnke, Isa A1 - Haertel, Tobias A1 - Mattick, Volker A1 - Lettow, Karsten A1 - Hafer, Jörg A1 - Ludwig, Joachim A1 - Schumann, Marlen A1 - Laroque, Christoph A1 - Schulte, Jonas A1 - Urban, Diana ED - Engbring, Dieter ED - Keil, Reinhard ED - Magenheim, Johannes ED - Selke, Harald T1 - HDI2010 – Tagungsband der 4. Fachtagung zur "Hochschuldidaktik Informatik" N2 - Mit der 4. Tagung zur Hochschuldidaktik Informatik wird eine Reihe fortgesetzt, die ihren Anfang 1998 in Stuttgart unter der Überschrift „Informatik und Ausbildung“ genommen hat. Seither dienen diese Tagungen den Lehrenden im Bereich der Hochschulinformatik als Forum der Information und des Diskurses über aktuelle didaktische und bildungspolitische Entwicklungen im Bereich der Informatikausbildung. Aktuell zählen dazu insbesondere Fragen der Bildungsrelevanz informatischer Inhalte und der Herausforderung durch eine stärkere Kompetenzorientierung in der Informatik. Die eingereichten Beiträge zur HDI 2010 in Paderborn veranschaulichen unterschiedliche Bemühungen, sich mit relevanten Problemen der Informatikdidaktik an Hochschulen in Deutschland (und z. T. auch im Ausland) auseinanderzusetzen. Aus der Breite des Spektrums der Einreichungen ergaben sich zugleich Probleme bei der Begutachtung. Letztlich konnten von den zahlreichen Einreichungen nur drei die Gutachter so überzeugen, dass sie uneingeschränkt in ihrer Langfassung akzeptiert wurden. Neun weitere Einreichungen waren trotz Kritik überwiegend positiv begutachtet worden, so dass wir diese als Kurzfassung bzw. Diskussionspapier in die Tagung aufgenommen haben. T3 - Commentarii informaticae didacticae (CID) - 4 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49167 SN - 978-3-86956-100-4 PB - Universitätsverlag Potsdam CY - Potsdam ER -