TY - JOUR A1 - Taft, Linda A1 - Wiechert, Uwe A1 - Zhang, Hucai A1 - Lei, Guoliang A1 - Mischke, Steffen A1 - Plessen, Birgit A1 - Weynell, Marc A1 - Winkler, Andreas A1 - Riedel, Frank T1 - Oxygen and carbon isotope patterns archived in shells of the aquatic gastropod Radix - hydrologic and climatic signals across the Tibetan Plateau in sub-monthly resolution JF - Quaternary international : the journal of the International Union for Quaternary Research N2 - The Tibetan Plateau (TP), including its surrounding mountain ranges, represents the largest store of ice outside the polar regions. It hosts numerous lakes as well as the head waters of major Asian rivers, on which billions of people depend, and it is particularly sensitive to climate change. The moisture transport to the TP is controlled by the Indian and Pacific monsoon and the Westerlies. Understanding the evolution of the interaction of these circulation systems requires studies on climate archives in different spatial and temporal contexts. The objective of this study is to learn more about the interannual variability of precipitation patterns across the TP and how different hydrologic systems react to different climatic factors. Aragonite shells of the aquatic gastropod Radix, which is widely distributed in the region, may represent suitable archives for inferring hydrologic and climatic signals in particularly high resolution. Therefore, sclerochronological studies of delta O-18 and delta C-13 ratios in Radix shells from seven lakes were conducted, each representing a different hydrologic and climatic setting, on a transect from the Pamirs across the TP. The shell patterns exhibit an increasing influence of precipitation and a decreasing influence of evaporation on the isotope compositions from west to east. delta O-18 values of shells from lakes on the eastern and central TP (Donggi Cona, Yamdrok Yumco, Tarab Co) mirror monsoon signals, indicated by more negative values and higher variabilities compared to the more western lakes (Karakul, Bangong/Nyak, Manasarovar). In Yadang Co, located on the central southern TP, the monsoon rains did not reach the lake in the sampling year, although it is located in a region which is usually affected by monsoon circulation. The delta O-18 values are used to differentiate the annual hydrological cycle into ice cover period, melt water period, precipitation period and evaporation period. delta C-13 compositions in the shells particularly depend on specific habitats, which vary in biological productivity and in carbon sources. delta O-18 and delta C-13 patterns show a positive covariance in shells originating from large closed basins. The results show that Radix shells mirror general climatic differences between the seven lake regions. These differences reflect both regional and local climate signals in sub-seasonal resolution, without noticeable dependence on the particular lake system. Y1 - 2013 U6 - https://doi.org/10.1016/j.quaint.2012.10.031 SN - 1040-6182 VL - 290 IS - 1 SP - 282 EP - 298 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Sarauli, David A1 - Riedel, Marc A1 - Wettstein, Christoph A1 - Hahn, Robert A1 - Stiba, Konstanze A1 - Wollenberger, Ursula A1 - Leimkühler, Silke A1 - Schmuki, Patrik A1 - Lisdat, Fred T1 - Semimetallic TiO2 nanotubes new interfaces for bioelectrochemical enzymatic catalysis JF - Journal of materials chemistry N2 - Different self-organized TiO2 nanotube structures are shown to represent new interfaces for the achievement of bioelectrochemical enzymatic catalysis involving redox proteins and enzymes without further surface modification or the presence of mediators. Y1 - 2012 U6 - https://doi.org/10.1039/c2jm16427b SN - 0959-9428 VL - 22 IS - 11 SP - 4615 EP - 4618 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Riedel, Marc T1 - Photonic wiring of enzymatic reactions to photoactive entities for the construction of biohybrid electrodes T1 - Photonische Kontaktierung von enzymatischen Reaktionen mit photoaktiven Entitäten für den Aufbau von biohybriden Elektroden N2 - In this work, different strategies for the construction of biohybrid photoelectrodes are investigated and have been evaluated according to their intrinsic catalytic activity for the oxidation of the cofactor NADH or for the connection with the enzymes PQQ glucose dehydrogenase (PQQ-GDH), FAD-dependent glucose dehydrogenase (FAD-GDH) and fructose dehydrogenase (FDH). The light-controlled oxidation of NADH has been analyzed with InGaN/GaN nanowire-modified electrodes. Upon illumination with visible light the InGaN/GaN nanowires generate an anodic photocurrent, which increases in a concentration-dependent manner in the presence of NADH, thus allowing determination of the cofactor. Furthermore, different approaches for the connection of enzymes to quantum dot (QD)-modified electrodes via small redox molecules or redox polymers have been analyzed and discussed. First, interaction studies with diffusible redox mediators such as hexacyanoferrate(II) and ferrocenecarboxylic acid have been performed with CdSe/ZnS QD-modified gold electrodes to build up photoelectrochemical signal chains between QDs and the enzymes FDH and PQQ-GDH. In the presence of substrate and under illumination of the electrode, electrons are transferred from the enzyme via the redox mediators to the QDs. The resulting photocurrent is dependent on the substrate concentration and allows a quantification of the fructose and glucose content in solution. A first attempt with immobilized redox mediator, i.e. ferrocenecarboxylic acid chemically coupled to PQQ-GDH and attached to QD-modified gold electrodes, reveal the potential to build up photoelectrochemical signal chains even without diffusible redox mediators in solution. However, this approach results in a significant deteriorated photocurrent response compared to the situation with diffusing mediators. In order to improve the photoelectrochemical performance of such redox mediator-based, light-switchable signal chains, an osmium complex-containing redox polymer has been evaluated as electron relay for the electronic linkage between QDs and enzymes. The redox polymer allows the stable immobilization of the enzyme and the efficient wiring with the QD-modified electrode. In addition, a 3D inverse opal TiO2 (IO-TiO2) electrode has been used for the integration of PbS QDs, redox polymer and FAD-GDH in order to increase the electrode surface. This results in a significantly improved photocurrent response, a quite low onset potential for the substrate oxidation and a broader glucose detection range as compared to the approach with ferrocenecarboxylic acid and PQQ-GDH immobilized on CdSe/ZnS QD-modified gold electrodes. Furthermore, IO-TiO2 electrodes are used to integrate sulfonated polyanilines (PMSA1) and PQQ-GDH, and to investigate the direct interaction between the polymer and the enzyme for the light-switchable detection of glucose. While PMSA1 provides visible light excitation and ensures the efficient connection between the IO-TiO2 electrode and the biocatalytic entity, PQQ-GDH enables the oxidation of glucose. Here, the IO-TiO2 electrodes with pores of approximately 650 nm provide a suitable interface and morphology, which is required for a stable and functional assembly of the polymer and enzyme. The successful integration of the polymer and the enzyme can be confirmed by the formation of a glucose-dependent anodic photocurrent. In conclusion, this work provides insights into the design of photoelectrodes and presents different strategies for the efficient coupling of redox enzymes to photoactive entities, which allows for light-directed sensing and provides the basis for the generation of power from sun light and energy-rich compounds. N2 - In dieser Arbeit werden verschiedene Strategien für den Aufbau biohybrider Photoelektroden untersucht und hinsichtlich ihrer intrinsischen katalytischen Aktivität für die Oxidation des Kofaktors NADH oder für die Kontaktierung mit den Enzymen PQQ Glukosedehydrogenase (PQQ-GDH), FAD-abhängige Glukosedehydrogenase (FAD-GDH) und Fruktosedehydrogenase (FDH) evaluiert. Der Licht-gesteuerten Nachweis von NADH wurde mittels InGaN/GaN Nanodraht-modifizierten Elektroden untersucht. Bei Beleuchtung mit sichtbarem Licht generieren die InGaN/GaN Nanodrähte einen anodischen Photostrom, welcher in der Anwesenheit von NADH konzentrationsabhängig ansteigt und somit eine Bestimmung des Kofaktors erlaubt. Des Weiteren werden verschiedene Ansätze für die Kontaktierung von Enzymen mit Quantum Dot (QD)-modifizierten Elektroden unter Verwendung von kleinen Redoxmolekülen oder Redoxpolymeren analysiert und diskutiert. Zunächst wurden Interaktionsstudien mit den Redoxmediatoren Kaliumhexacyanoferrat(II) und Ferrocencarbonsäure in Lösung an CdSe/ZnS QD-modifizierten Goldelektroden durchgeführt um darauf aufbauend photoelektrochemische Signalketten zwischen QDs und den Enzymen FDH und PQQ-GDH aufzubauen und für den Nachweis von Fruktose und Glukose zu nutzen. In Anwesenheit von Substrat und unter Beleuchtung der Elektrode werden Elektronen von dem Enzym über die Redoxmediatoren zu den QDs übertragen. Der daraus resultierende Photostrom ist abhängig von der Substratkonzentration und erlaubt eine Bestimmung des Fruktose- und Glukosegehalts in Lösung. Ein erster Ansatz mit immobilisierten Redoxmediatoren, d.h. Ferrocencarbonsäure kovalent an PQQ-GDH gebunden und auf QD-modifizierten Goldelektroden immobilisiert, zeigt das Potential photoelektrochemische Signalketten auch ohne Redoxmediatoren in Lösung aufzubauen. Jedoch resultierte dieser Ansatz in einer deutlichen Verschlechterung der Photostromantwort im Vergleich zum Ansatz mit Mediatoren in Lösung. Um die photoelektrochemische Leistungsfähigkeit Redoxmediator-basierter, Licht-schaltbarer Signalketten zu verbessern, wurde ein Osmiumkomplex-Redoxpolymer für die elektronische Kontaktierung zwischen QDs und Enzymen untersucht. Das Redoxpolymer erlaubt eine stabile Immobilisierung des Enzymes und eine effiziente Kontaktierung mit der QD-modifizierten Elektrode. Zusätzlich wurde eine 3D „inverse opale“ TiO2 (IO-TiO2) Elektrode für die Integration der PbS QDs, des Redoxpolymers und der FAD-GDH verwendet um die Elektrodenoberfläche zu vergrößern. Dies führt zu einer deutlich verbesserten Leistungsfähigkeit hinsichtlich der Photostromantwort, des Startpotentials für die Substratoxidation und des Nachweisbereiches für Glukose im Vergleich zu dem Ansatz mit Ferrocencarbonsäure und PQQ-GDH immobilisiert auf CdSe/ZnS QD-modifizierten Goldelektroden. Des Weiteren wurden IO-TiO2 Elektroden verwendet um sulfonierte Polyaniline (PMSA1) und PQQ-GDH zu integrieren und die direkte Interaktion zwischen dem Polymer und dem Enzym für den Licht-schaltbaren Nachweis von Glukose zu untersuchen. Während PMSA1 eine Anregung mit sichtbaren Licht ermöglicht und die effiziente Verbindung zwischen der IO-TiO2-Elektrode und der biokatalytischen Einheit sicherstellt, ermöglicht die PQQ-GDH die Oxidation von Glukose. Hierbei bieten die IO-TiO2-Elektroden mit Poren von ca. 650 nm eine geeignete Schnittstelle und Morphologie, welche für eine stabile und funktionelle Assemblierung des Polymers und Enzyms benötigt wird. Die erfolgreiche Integration des Polymers und des Enzyms kann durch die Ausbildung eines Glukose-abhängigen anodischen Photostroms bestätigt werden. Zusammenfassend gibt diese Arbeit Einblicke in den Aufbau von Photoelektroden und präsentiert verschiedene, effiziente Kopplungsstrategien zwischen Redoxenzymen und photoaktiven Komponenten, welche einen Licht-gesteuerten Nachweis von Analyten ermöglichen und die Grundlage für die Energieerzeugung aus Licht und energiereichen Verbindungen bilden. KW - biocatalysis KW - photocatalysis KW - quantum dots KW - photoelectrochemical sensor KW - enzymes KW - Biokatalyse KW - Photokatalyse KW - Quantum Dots KW - Photoelektrchemischer Sensor KW - Enzyme Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-417280 ER -