TY - JOUR A1 - Fluschnik, Till A1 - Kriewald, Steffen A1 - Ros, Anselmo Garcia Cantu A1 - Zhou, Bin A1 - Reusser, Dominik Edwin A1 - Kropp, Jürgen A1 - Rybski, Diego T1 - The Size Distribution, Scaling Properties and Spatial Organization of Urban Clusters: A Global and Regional Percolation Perspective JF - ISPRS International Journal of Geo-Information N2 - Human development has far-reaching impacts on the surface of the globe. The transformation of natural land cover occurs in different forms, and urban growth is one of the most eminent transformative processes. We analyze global land cover data and extract cities as defined by maximally connected urban clusters. The analysis of the city size distribution for all cities on the globe confirms Zipf’s law. Moreover, by investigating the percolation properties of the clustering of urban areas we assess the closeness to criticality for various countries. At the critical thresholds, the urban land cover of the countries undergoes a transition from separated clusters to a gigantic component on the country scale. We study the Zipf-exponents as a function of the closeness to percolation and find a systematic dependence, which could be the reason for deviating exponents reported in the literature. Moreover, we investigate the average size of the clusters as a function of the proximity to percolation and find country specific behavior. By relating the standard deviation and the average of cluster sizes—analogous to Taylor’s law—we suggest an alternative way to identify the percolation transition. We calculate spatial correlations of the urban land cover and find long-range correlations. Finally, by relating the areas of cities with population figures we address the global aspect of the allometry of cities, finding an exponent δ ≈ 0.85, i.e., large cities have lower densities. Y1 - 2016 U6 - https://doi.org/10.3390/ijgi5070110 SN - 2220-9964 VL - 5 SP - 1543 EP - 1559 PB - MDPI CY - Basel ER - TY - JOUR A1 - Landholm, David M. A1 - Holsten, Anne A1 - Martellozzo, Federico A1 - Reusser, Dominik Edwin A1 - Kropp, Jürgen T1 - Climate change mitigation potential of community-based initiatives in Europe JF - Regional environmental change N2 - There is a growing recognition that a transition to a sustainable low-carbon society is urgently needed. This transition takes place at multiple and complementary scales, including bottom-up approaches such as community-based initiatives (CBIs). However, empirical research on CBIs has focused until now on anecdotal evidence and little work has been done to quantitatively assess their impact in terms of greenhouse gas (GHG) emissions. In this paper, we analyze 38 European initiatives across the food, energy, transport, and waste sectors to address the following questions: How can the GHG reduction potential of CBIs be quantified and analyzed in a systematic manner across different sectors? What is the GHG mitigation potential of CBIs and how does the reduction potential differ across domains? Through the comparison of the emission intensity arising from the goods and services the CBIs provide in relation to a business-as-usual scenario, we present the potential they have across different activities. This constitutes the foundational step to upscaling and further understanding their potential contribution to achieving climate change mitigation targets. Our findings indicate that energy generation through renewable sources, changes in personal transportation, and dietary change present by far the highest GHG mitigation activities analyzed, since they reduce the carbon footprint of CBI beneficiaries by 24%, 11%, and 7%, respectively. In contrast, the potential for some activities, such as locally grown organic food, is limited. The service provided by these initiatives only reduces the carbon footprint by 0.1%. Overall, although the proliferation of CBIs is very desirable from a climate change mitigation perspective it is necessary to stress that bottom-up initiatives present other important positive dimensions besides GHG mitigation. These initiatives also hold the potential of improving community resilience by strengthening local economies and enhancing social cohesion. KW - Greenhouse gas emissions KW - Sustainability transitions KW - Grassroots initiatives KW - Carbon footprint KW - Sustainable lifestyles KW - Low carbon economy Y1 - 2018 U6 - https://doi.org/10.1007/s10113-018-1428-1 SN - 1436-3798 SN - 1436-378X VL - 19 IS - 4 SP - 927 EP - 938 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Rybski, Diego A1 - Reusser, Dominik Edwin A1 - Winz, Anna-Lena A1 - Fichtner, Christina A1 - Sterzel, Till A1 - Kropp, Jürgen T1 - Cities as nuclei of sustainability? JF - Environment and Planning B: Urban Analytics and City Science N2 - We have assembled CO2 emission figures from collections of urban GHG emission estimates published in peer-reviewed journals or reports from research institutes and non-governmental organizations. Analyzing the scaling with population size, we find that the exponent is development dependent with a transition from super- to sub-linear scaling. From the climate change mitigation point of view, the results suggest that urbanization is desirable in developed countries. Further, we compare this analysis with a second scaling relation, namely the fundamental allometry between city population and area, and propose that density might be a decisive quantity too. Last, we derive the theoretical country-wide urban emissions by integration and obtain a dependence on the size of the largest city. KW - Scaling KW - cities KW - climate change KW - development process KW - allometry Y1 - 2017 U6 - https://doi.org/10.1177/0265813516638340 SN - 2399-8083 SN - 2399-8091 VL - 44 IS - 3 SP - 425 EP - 440 PB - Sage Publ. CY - London ER - TY - THES A1 - Reusser, Dominik Edwin T1 - Combining smart model diagnostics and effective data collection for snow catchments T1 - Zeitlich aufgelöste Modelldiagnose und kosteneffektive Messungen für Schneeeinzugsgebiete N2 - Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment. N2 - Modelle zur Hochwasservorhersage und –warnung basieren auf einer bio-physikalisch Repräsentation der relevanten hydrologischen Prozesse. Eine Verbesserungen der Beschreibung dieser Prozesse kann zuverlässigere Vorhersagen ermöglichen. Dazu wird die Benutzung eines Lernzykluses bestehend aus einer kritische Beurteilung eines existierenden Modells, der Erhebung zusätzlicher Daten, der Bildung eines vertieften Verständnis und einer Überarbeitung des Modells vorgeschlagen. In dieser Arbeit wird ein solcher Lernzyklus aufgegriffen, wobei der Schwerpunkt auf einer verbesserten Modellanalyse und kosteneffizientere Messungen liegt. Für eine erfolgreiche Modellbeurteilung sind drei Fragen zu beantworten: 1) Wann reproduziert ein Modell die beobachteten Werte in einer zufriedenstellenden Weise (nicht)? 2) Wie lassen sich die Abweichungen charakterisieren? und 3) welches sind die Modellkomponenten, die diese Abweichungen bedingen? Um die ersten beiden Fragen zu beantworten, wird eine neue Methode zur Beurteilung des zeitlichen Verlaufs der Modellgüte vorgestellt. Eine wichtige Stärke ist, dass wiederholende Muster ungenügender Modellgüte auch für lange Simulationsläufe einfach identifiziert werden können. Die dritte Frage wird durch die Analyse des zeitlichen Verlaufs der Parametersensitivität beantwortet. Eine Kombination der beiden Methoden zur Beantwortung aller drei Fragen stellt ein umfangreiches Werkzeug für die Analyse hydrologischer Modelle zur Verfügung. Als Fallstudie wurde WaSiM-ETH verwendet, um das Einzugsgebiet der wilden Weißeritz zu modellieren. Die Modellanalyse von WaSiM-ETH hat ergeben, dass die Schneedynamik und die Rezession während trockener Perioden im Spätsommer und Herbst, für eine Beschreibung der Prozesse an der Weißeritz nicht geeignet sind. Die Erhebung zusätzlicher Daten zum besseren Verständnis der Schneedynamik bildet den nächste Schritt im Lernzyklus. Daten über Schneetemperaturen und Schneehöhen wurden mit Hilfe eines neuen, preisgünstigen Verfahrens erhoben. Dazu wurde die Temperatur an jedem Standort mit unterschiedlichen Abständen zum Boden gemessen und mit einem neuen Algorithmus in Schneehöhe und Kältegehalt umgerechnet. Die Schneehöhe und Kältegehalt sind wichtige Größen für die Vorhersage von Frühjahrshochwassern. Die räumliche Variabilität der Schneedecke auf der Einzugsgebietsskala wurde entsprechend der Landnutzung, der Höhenzone und der Ausrichtung stratifiziert untersucht, wobei lediglich der Einfluss der Höhe nachgewiesen werden konnte, während Ausrichtung und Landnutzung keinen statistisch signifikanten Einfluss hatten. Um die Defizite des WaSiM-ETH Schneemodules für die Beschreibung der Prozesse im Weißeritzeinzugsgebiets besser zu verstehen, wurde der gleiche konzeptionelle Ansatz als eigenständiges, kleines Modell benutzt, um die Dynamik in den Schneedaten zu reproduzieren. Während dieses Grad-Tag-Modell in der Lage war, den zeitlichen Verlauf für Flächen mit einer kontinuierlichen Schneedecke zu reproduzieren, konnte die Dynamik für Flächen mit mehreren Akkumulations- und Schmelzzyklen im unteren Einzugsgebiet vom Modell nicht abgebildet werden. Vorschläge zur Verbesserung des Modells werden in der Arbeit gemacht. Zusammenfassend hat sich das Lernzyklus-Konzept als nützlich erwiesen, um gezielt an einer Modellverbesserung zu arbeiten. Die differenzierte Modelldiagnose ist wertvoll, um Defizite im Modellkonzept zu identifizieren. Die während dieser Studie erhobenen Daten sind geeignet, um ein verbessertes Verständnis der Schnee-Prozesse an der Weißeritz zu erlangen. KW - Hydrologie KW - Modellierung KW - Modell Diagnose KW - Schnee KW - Sensitivitätsanalyse KW - hydrology KW - modelling KW - model diagnostics KW - snow KW - sensitivity analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52574 ER - TY - JOUR A1 - Bronstert, Axel A1 - Creutzfeldt, Benjamin A1 - Gräff, Thomas A1 - Hajnsek, Irena A1 - Heistermann, Maik A1 - Itzerott, Sibylle A1 - Jagdhuber, Thomas A1 - Kneis, David A1 - Lueck, Erika A1 - Reusser, Dominik A1 - Zehe, Erwin T1 - Potentials and constraints of different types of soil moisture observations for flood simulations in headwater catchments JF - Natural hazards : journal of the International Society for the Prevention and Mitigation of Natural Hazards N2 - Flood generation in mountainous headwater catchments is governed by rainfall intensities, by the spatial distribution of rainfall and by the state of the catchment prior to the rainfall, e. g. by the spatial pattern of the soil moisture, groundwater conditions and possibly snow. The work presented here explores the limits and potentials of measuring soil moisture with different methods and in different scales and their potential use for flood simulation. These measurements were obtained in 2007 and 2008 within a comprehensive multi-scale experiment in the Weisseritz headwater catchment in the Ore-Mountains, Germany. The following technologies have been applied jointly thermogravimetric method, frequency domain reflectometry (FDR) sensors, spatial time domain reflectometry (STDR) cluster, ground-penetrating radar (GPR), airborne polarimetric synthetic aperture radar (polarimetric SAR) and advanced synthetic aperture radar (ASAR) based on the satellite Envisat. We present exemplary soil measurement results, with spatial scales ranging from point scale, via hillslope and field scale, to the catchment scale. Only the spatial TDR cluster was able to record continuous data. The other methods are limited to the date of over-flights (airplane and satellite) or measurement campaigns on the ground. For possible use in flood simulation, the observation of soil moisture at multiple scales has to be combined with suitable hydrological modelling, using the hydrological model WaSiM-ETH. Therefore, several simulation experiments have been conducted in order to test both the usability of the recorded soil moisture data and the suitability of a distributed hydrological model to make use of this information. The measurement results show that airborne-based and satellite-based systems in particular provide information on the near-surface spatial distribution. However, there are still a variety of limitations, such as the need for parallel ground measurements (Envisat ASAR), uncertainties in polarimetric decomposition techniques (polarimetric SAR), very limited information from remote sensing methods about vegetated surfaces and the non-availability of continuous measurements. The model experiments showed the importance of soil moisture as an initial condition for physically based flood modelling. However, the observed moisture data reflect the surface or near-surface soil moisture only. Hence, only saturated overland flow might be related to these data. Other flood generation processes influenced by catchment wetness in the subsurface such as subsurface storm flow or quick groundwater drainage cannot be assessed by these data. One has to acknowledge that, in spite of innovative measuring techniques on all spatial scales, soil moisture data for entire vegetated catchments are still today not operationally available. Therefore, observations of soil moisture should primarily be used to improve the quality of continuous, distributed hydrological catchment models that simulate the spatial distribution of moisture internally. Thus, when and where soil moisture data are available, they should be compared with their simulated equivalents in order to improve the parameter estimates and possibly the structure of the hydrological model. KW - Soil moisture KW - Remote sensing KW - Hydrological modelling KW - Flood forecasting KW - Soil moisture measurement comparison Y1 - 2012 U6 - https://doi.org/10.1007/s11069-011-9874-9 SN - 0921-030X SN - 1573-0840 VL - 60 IS - 3 SP - 879 EP - 914 PB - Springer CY - New York ER - TY - JOUR A1 - Gräff, Thomas A1 - Zehe, Erwin A1 - Reusser, Dominik A1 - Lueck, Erika A1 - Schroeder, Boris A1 - Wenk, Gerald A1 - John, Hermann A1 - Bronstert, Axel T1 - Process identification through rejection of model structures in a mid-mountainous rural catchment : observations of rainfall-runoff response, geophysical conditions and model inter-comparison N2 - The intention of the presented study is to gain a better understanding of the mechanisms that caused the bimodal rainfall-runoff responses which occurred up to the mid-1970s regularly in the Schafertal catchment and vanished after the onset of mining activities. Understanding, this process is a first step to understanding the ongoing hydrological change in this area. It is hypothesized that either subsurface stormflow, or fast displacement of groundwater, could cause the second delayed peak. A top-down analysis of rainfall-runoff data, field observations as well as process modelling are combined within a rejectionistic framework. A statistical analysis is used to test whether different predictors. which characterize the forcing. near surface water content and deeper subsurface store, allow the prediction of the type of rainfall-runoff response. Regression analysis is used with generalized linear models Lis they can deal with non-Gaussian error distributions Lis well its a non-stationary variance. The analysis reveals that the dominant predictors are the pre-event discharge (proxy of state of the groundwater store) and the precipitation amount, In the field campaign, the subsurface at a representative hillslope was investigated by means of electrical resistivity tomography in order to identify possible strata as flow paths for subsurface stormflow. A low resistivity in approximately 4 in depth-either due to a less permeable layer or the groundwater surface-was detected. The former Could serve as a flow path for subsurface stormflow. Finally, the physical-based hydrological model CATFLOW and the groundwater model FEFLOW are compared with respect to their ability to reproduce the bimodal runoff responses. The groundwater model is able to reproduce the observations, although it uses only an abstract representation of the hillslopes. Process model analysis as well Lis statistical analysis strongly suggest that fast displacement of groundwater is the dominant process underlying the bimodal runoff reactions. Y1 - 2009 UR - http://www3.interscience.wiley.com/journal/4125/home U6 - https://doi.org/10.1002/Hyp.7171 SN - 0885-6087 ER -