TY - JOUR A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - A deep reinforcement learning based hyper-heuristic for modular production control JF - International journal of production research N2 - In nowadays production, fluctuations in demand, shortening product life-cycles, and highly configurable products require an adaptive and robust control approach to maintain competitiveness. This approach must not only optimise desired production objectives but also cope with unforeseen machine failures, rush orders, and changes in short-term demand. Previous control approaches were often implemented using a single operations layer and a standalone deep learning approach, which may not adequately address the complex organisational demands of modern manufacturing systems. To address this challenge, we propose a hyper-heuristics control model within a semi-heterarchical production system, in which multiple manufacturing and distribution agents are spread across pre-defined modules. The agents employ a deep reinforcement learning algorithm to learn a policy for selecting low-level heuristics in a situation-specific manner, thereby leveraging system performance and adaptability. We tested our approach in simulation and transferred it to a hybrid production environment. By that, we were able to demonstrate its multi-objective optimisation capabilities compared to conventional approaches in terms of mean throughput time, tardiness, and processing of prioritised orders in a multi-layered production system. The modular design is promising in reducing the overall system complexity and facilitates a quick and seamless integration into other scenarios. KW - production control KW - modular production KW - multi-agent system KW - deep reinforcement learning KW - deep learning KW - multi-objective optimisation Y1 - 2023 U6 - https://doi.org/10.1080/00207543.2023.2233641 SN - 0020-7543 SN - 1366-588X SN - 0278-6125 SP - 1 EP - 22 PB - Taylor & Francis CY - London ER - TY - JOUR A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - https://doi.org/10.30844/IM_23-2_11-14 SN - 2364-9208 VL - 39 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Bender, Benedict A1 - Bertheau, Clementine A1 - Körppen, Tim A1 - Lauppe, Hannah A1 - Gronau, Norbert T1 - A proposal for future data organization in enterprise systems BT - an analysis of established database approaches JF - Information systems and e-business management N2 - The digital transformation sets new requirements to all classes of enterprise systems in companies. ERP systems in particular, which represent the dominant class of enterprise systems, are struggling to meet the new requirements at all levels of the architecture. Therefore, there is an urgent need to reconsider the overall architecture of the systems and address the root of the related issues. Given that many restrictions ERP pose on their adaptability are related to the standardization of data, the database layer of ERP systems is addressed. Since database serve as the foundation for data storage and retrieval, they limit the flexibility of enterprise systems and the chance to adapt to new requirements accordingly. So far, relational databases are widely used. Using a systematic literature approach, recent requirements for ERP systems were identified. Prominent database approaches were assessed against the 23 requirements identified. The results reveal the strengths and weaknesses of recent database approaches. To this end, the results highlight the demand to combine multiple database approaches to fulfill recent business requirements. From a conceptual point of view, this paper supports the idea of federated databases which are interoperable to fulfill future requirements and support business operation. This research forms the basis for renewal of the current generation of ERP systems and proposes to ERP vendors to use different database concepts in the future. KW - database KW - enterprise system KW - ERP system KW - requirements KW - problems KW - future Y1 - 2022 U6 - https://doi.org/10.1007/s10257-022-00555-6 SN - 1617-9846 SN - 1617-9854 VL - 20 SP - 441 EP - 494 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - KI-basierte Assistenzsysteme in betrieblichen Lernprozessen JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Assistenzsysteme finden im Kontext der digitalen Transformation immer mehr Einsatz. Sie können Beschäftigte in industriellen Produktionsprozessen sowohl in der Anlern- als auch in der aktiven Arbeitsphase unterstützen. Kompetenzen können so arbeitsplatz- und prozessnah sowie bedarfsorientiert aufgebaut werden. In diesem Beitrag wird der aktuelle Forschungsstand zu den Einsatzmöglichkeiten dieser Assistenzsysteme diskutiert und mit Beispielen illustriert. Es werden unter anderem auch Herausforderungen für den Einsatz aufgezeigt. Am Ende des Beitrags werden Potenziale für die zukünftige Nutzung von AS in industriellen Lernprozessen und für die Forschung identifiziert. KW - KI KW - kognitive Assistenzsysteme KW - betriebliche Lernprozesse KW - Weiterbildung Y1 - 2022 U6 - https://doi.org/10.30844/I40M_22-2_11-14 SN - 2364-9216 SN - 2364-9208 VL - 38 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Ullrich, André A1 - Vladova, Gergana A1 - Marquart, Danny A1 - Braun, Andreas A1 - Gronau, Norbert T1 - An overwiew of benefits and risks in open innovation projects and the influence of intermediary participation, decision-making authority, experience, and position on their perception JF - International journal of innovation management : IJIM N2 - This paper presents an exploratory study investigating the influence of the factors (1) intermediary participation, (2) decision-making authority, (3) position in the enterprise, and (4) experience in open innovation on the perception and assessment of the benefits and risks expected from participating in open innovation projects. For this purpose, an online survey was conducted in Germany, Austria and Switzerland. The result of this paper is an empirical evidence showing whether and how these factors affect the perception of potential benefits and risks expected within the context of open innovation project participation. Furthermore, the identified effects are discussed against the theory. Existing theory regarding the benefits and risks of open innovation is expanded by (1) finding that they are perceived mostly independently of the factors, (2) confirming the practical relevance of benefits and risks, and (3) enabling a finer distinction between their degrees of relevance according to respective contextual specifics. KW - Open innovation KW - intermediaries KW - benefits KW - decision-making KW - experience; KW - risks Y1 - 2022 U6 - https://doi.org/10.1142/S1363919622500128 SN - 1363-9196 SN - 1757-5877 VL - 26 IS - 02 PB - World Scientific Publ. CY - Singapore ER - TY - JOUR A1 - Panzer, Marcel A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Neural agent-based production planning and control BT - an architectural review JF - Journal of Manufacturing Systems N2 - Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality. KW - production planning and control KW - machine learning KW - neural networks KW - systematic literature review KW - taxonomy Y1 - 2022 U6 - https://doi.org/10.1016/j.jmsy.2022.10.019 SN - 0278-6125 SN - 1878-6642 VL - 65 SP - 743 EP - 766 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Lewandowski, Stefanie A1 - Ullrich, André A1 - Gronau, Norbert T1 - Normen zur Berechnung des CO₂-Fußabdrucks T1 - Standards for calculating a carbon footprint BT - ein Vergleich von PAS 2050, GHG Protocol und ISO 14067 JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - CO₂-Fußabdrücke sind ein aktuell viel diskutiertes Thema mit weitreichenden Implikationen für Individuen als auch Unternehmen. Firmen können einen proaktiven Beitrag zur Transparenz leisten, indem der unternehmens- oder produktbezogene CO₂-Fußabdruck ausgewiesen wird. Ist der Entschluss gefasst einen CO₂-Fußabdruck auszuweisen und die entstehenden Treibhausgase zu erfassen, existiert eine Vielzahl unterschiedlicher Normen und Zertifikate, wie die publicly available specification 2050, das Greenhouse Gas Protokoll oder die ISO 14067. Das Ziel dieses Beitrags ist es, diese drei Normen zur Berechnung des produktbezogenen CO₂-Fußabdrucks zu vergleichen, um Gemeinsamkeiten und Unterschiede sowie Vor- und Nachteile in der Anwendung aufzuzeigen. Die Übersicht soll Unternehmen bei der Entscheidungsfindung hinsichtlich der Eignung eines CO₂-Fußabdrucks für ihr Unternehmen unterstützen. N2 - Carbon footprints are a widely discussed topic impacting the individuals as well as companies. A company can be transparent in their actions, by publishing a carbon footprint. These footprints can be calculated for a single product or the whole company. However, there is a variety of different carbon footprint standards. The internationally most recognized ones are the publicly available specification 2050, Greenhouse Gas protocol (2011) and ISO 14067. This paper compares the standards and gives a recommendation for the application of product carbon footprints. KW - environmental footprint KW - product carbon footprint KW - ökologischer Fußabdruck KW - CO₂-Fußabdruck KW - PAS 2050 KW - GHG Protocol KW - ISO 14067 Y1 - 2021 U6 - https://doi.org/10.30844/I40M_21-4_S17-20 SN - 2364-9208 VL - 37 IS - 4 SP - 17 EP - 20 PB - GITO mbH Verlag CY - München ER - TY - JOUR A1 - Gronau, Norbert A1 - Bender, Benedict A1 - Bertheau, Clementine A1 - Lauppe, Hannah T1 - Robotic Process Automation statt neuem ERP-System T1 - Robotic Process Automation instead of new ERP systems BT - das steckt hinter dem Hype BT - what’s behind the hype JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Robotic Process Automation (RPA) steht für die softwareunterstützte Bedienung von Softwarelösungen über deren Benutzeroberfläche. Das primäre Ziel, das mit RPA erreicht werden soll, ist die automatisierte Ausführung von Routineaufgaben, die bisher einen menschlichen Eingriff erforderten. Das Potenzial von RPA, Prozesse langfristig zu verbessern, ist allerdings stark begrenzt. Die Automatisierung von Prozessen und die Überbrückung von Medienbrüchen auf der Front-End-Ebene führt zu einer Vielzahl von Abhängigkeiten und Bedingungen, die in diesem Beitrag zusammengefasst werden. Der Weg zu einer nachhaltigen Unternehmensarchitektur (bestehend aus Prozessen und Systemen) erfordert offene, adaptive Systeme mit moderner Architektur, die sich durch ein hohes Maß an Interoperabilität auf verschiedenen Ebenen auszeichnen. N2 - Robotic Process Automation (RPA) stands for the software-sup-ported operation of software solutions via their user interface. The primary goal to be achieved by RPA is the automated execution of tasks that previously required human intervention. The potential of RPA to improve process improvements in the long term must be considered greatly limited. Automating processes and bridging media gaps at the front-end level results in a multitude of dependencies and conditions which this paper summarizes. The path to a sustainable enterprise architecture (consisting of processes and systems) requires open, adaptive systems with modern architecture, which are characterized by a high level of interoperability at different levels. KW - ERP KW - Robotic Process Automation KW - RPA KW - Prozessintegration KW - Automatisierung KW - process integration KW - automation Y1 - 2021 UR - https://www.wiso-net.de/document/ERP__c8c3f3e4b15758c79ca036e7003be81d0a8b3864 U6 - https://doi.org/10.30844/ERP_21-1_29-32 SN - 1860-6725 VL - 17 IS - 1 SP - 29 EP - 32 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Kotarski, David A1 - Gronau, Norbert T1 - Facing the demographic change BT - recommendations for designing learning factories as age-appropriate teaching-learning environments for older blue-collar workers JF - SSRN eLibrary / Social Science Research Network N2 - Digitization and demographic change are enormous challenges for companies. Learning factories as innovative learning places can help prepare older employees for the digital change but must be designed and configured based on their specific learning requirements. To date, however, there are no particular recommendations to ensure effective age-appropriate training of bluecollar workers in learning factories. Therefore, based on a literature review, design characteristics and attributes of learning factories and learning requirements of older employees are presented. Furthermore, didactical recommendations for realizing age-appropriate learning designs in learning factories and a conceptualized scenario are outlined by synthesizing the findings. KW - learning factory KW - vocational training KW - learning environment KW - age-appropriate competence development KW - demographic change Y1 - 2021 U6 - https://doi.org/10.2139/ssrn.3858716 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Coring on digital software platforms BT - Fundamentals and Examples from the Mobile Device Sector JF - Schriften zur Business Analytics und zum Informationsmanagement N2 - Today’s mobile devices are part of powerful business ecosystems, which usually involve digital platforms. To better understand the complex phenomenon of coring and related dynamics, this paper presents a case study comparing iMessage as part of Apple’s iOS and WhatsApp. Specifically, it investigates activities regarding platform coring, as the integration of several functionalities provided by third-party applications in the platform core. The paper makes three contributions. First, a systematization of coring activities is developed. Coring modes are differentiated by the amount of coring and application maintenance. Second, the case study revealed that the phenomenon of platform coring is present on digital platforms for mobile devices. Third, the fundamentals of coring are discussed as a first step towards theoretical development. Even though coring constitutes a potential threat for third-party developers regarding their functional differentiation, an idea of what a beneficial partnership incorporating coring activities could look like is developed here. KW - coring KW - digital platforms KW - digital marketplaces KW - mobile software ecosystems Y1 - 2021 SN - 978-3-658-34798-7 SN - 978-3-658-34799-4 U6 - https://doi.org/10.1007/978-3-658-34799-4_4 SN - 2946-0670 SN - 2946-0662 SP - 45 EP - 77 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Grum, Marcus A1 - Sultanow, Eldar A1 - Friedmann, Daniel A1 - Ulrich, Andre A1 - Gronau, Norbert T1 - Tools des Maschinellen Lernens BT - Marktstudie, Anwendungsbereiche & Lösungen der Künstlichen Intelligenz N2 - Künstliche Intelligenz ist in aller Munde. Immer mehr Anwendungsbereiche werden durch die Auswertung von vorliegenden Daten mit Algorithmen und Frameworks z.B. des Maschinellen Lernens erschlossen. Dieses Buch hat das Ziel, einen Überblick über gegenwärtig vorhandene Lösungen zu geben und darüber hinaus konkrete Hilfestellung bei der Auswahl von Algorithmen oder Tools bei spezifischen Problemstellungen zu bieten. Um diesem Anspruch gerecht zu werden, wurden 90 Lösungen mittels einer systematischen Literaturrecherche und Praxissuche identifiziert sowie anschließend klassifiziert. Mit Hilfe dieses Buches gelingt es, schnell die notwendigen Grundlagen zu verstehen, gängige Anwendungsgebiete zu identifizieren und den Prozess zur Auswahl eines passenden ML-Tools für das eigene Projekt systematisch zu meistern. Y1 - 2021 SN - 978-3-95545-380-0 SN - 978-3-95545-318-7 U6 - https://doi.org/10.30844/grum_2020 PB - Gito CY - Berlin ER - TY - JOUR A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Students’ acceptance of technology-mediated teaching – How it was influenced during the COVID-19 Pandemic in 2020 BT - A study from Germany JF - Frontiers in psychology / Frontiers Research Foundation N2 - In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice. KW - COVID-19 KW - digital learning KW - discipline differences KW - e-learning KW - TAM KW - technology acceptance KW - technology-mediated teaching KW - university teaching Y1 - 2020 U6 - https://doi.org/10.3389/fpsyg.2021.636086 SN - 1664-1078 VL - 12 PB - Frontiers Research Foundation CY - Lausanne ER - TY - JOUR A1 - Gronau, Norbert A1 - Schaefer, Martin T1 - Why metadata matters for the future of copyright JF - European Intellectual Property Review N2 - In the copyright industries of the 21st century, metadata is the grease required to make the engine of copyright run smoothly and powerfully for the benefit of creators, copyright industries and users alike. However, metadata is difficult to acquire and even more difficult to keep up to date as the rights in content are mostly multi-layered, fragmented, international and volatile. This article explores the idea of a neutral metadata search and enhancement tool that could constitute a buffer to safeguard the interests of the various proprietary database owners and avoid the shortcomings of centralised databases. KW - copyright KW - databases KW - metadata KW - music industry Y1 - 2021 SN - 0142-0461 VL - 43 IS - 8 SP - 488 EP - 494 PB - Sweet & Maxwell CY - London ER - TY - JOUR A1 - Grum, Marcus A1 - Hiessl, Werner A1 - Maresch, Karl A1 - Gronau, Norbert T1 - Design of a neuronal training modeling language BT - exemplified with the AI-based dynamic GUI adaption JF - AIS-Transactions on enterprise systems N2 - As the complexity of learning task requirements, computer infrastruc- tures and knowledge acquisition for artificial neuronal networks (ANN) is in- creasing, it is challenging to talk about ANN without creating misunderstandings. An efficient, transparent and failure-free design of learning tasks by models is not supported by any tool at all. For this purpose, particular the consideration of data, information and knowledge on the base of an integration with knowledge- intensive business process models and a process-oriented knowledge manage- ment are attractive. With the aim of making the design of learning tasks express- ible by models, this paper proposes a graphical modeling language called Neu- ronal Training Modeling Language (NTML), which allows the repetitive use of learning designs. An example ANN project of AI-based dynamic GUI adaptation exemplifies its use as a first demonstration. KW - AI and business informatics KW - development of AI-based systems KW - AI-based decision support system KW - cooperative AI (human-in-the-loop) KW - process-oriented knowledge acquisition KW - modeling language Y1 - 2021 UR - https://www.aes-journal.com/index.php/ais-tes/article/view/20/18 U6 - https://doi.org/10.30844/aistes.v5i1.20 SN - 1867-7134 VL - 5 IS - 1 PB - GITO-Publ., Verl. für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Ullrich, André A1 - Teichmann, Malte A1 - Gronau, Norbert T1 - Fast trainable capabilities in software engineering-skill development in learning factories JF - Ji suan ji jiao yu = Computer Education / Qing hua da xue N2 - The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery. KW - learning factory KW - programming skills KW - software engineering KW - training Y1 - 2021 U6 - https://doi.org/10.16512/j.cnki.jsjjy.2020.12.002 SN - 1672-5913 IS - 12 SP - 2 EP - 10 PB - [Verlag nicht ermittelbar] CY - Bei jing shi ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Wenz, Julian A1 - Gronau, Norbert T1 - Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung T1 - Challenges and recommended actions for in-company vocational training in times of digitization JF - HMD Praxis der Wirtschaftsinformatik N2 - Die Digitalisierung von Produktionsprozessen schreitet mit einer hohen Intensität voran. Weiterbildung hat eine hohe Relevanz für betriebliche Transformationsprozesse. Die betriebliche Weiterbildungspraxis ist den aktuellen Herausforderungen der Digitalisierung jedoch nicht gewachsen. Herausforderungen sind Kompetenzlücken der Mitarbeiter, ungewisse Anforderungsprofile und Tätigkeitstypen, demographischer Wandel sowie veraltete didaktische Ansätze. Zudem wird bestehender inhaltlicher und pädagogischer Freiraum bei der Gestaltung von Weiterbildung oftmals nur unzureichend ausgenutzt. Die skizzierte Situation führt dazu, dass der Mehrwert gegenwärtiger Qualifizierungsangebote sowohl für Unternehmen als auch Beschäftigte nicht ausgeschöpft wird. Ausgehend von Veränderungen durch Digitalisierung in der Produktion und deren Auswirkungen auf die Kompetenzentwicklung diskutiert dieser Beitrag Herausforderungen gegenwärtiger betrieblicher Weiterbildung. Er leitet Handlungsempfehlungen ab, die mithilfe von Beispielen gewerkschaftlich unterstützter Weiterbildungspraxis illustriert werden. Im Ergebnis erhalten Interessierte einen Überblick über gegenwärtige Herausforderungen und Handlungsempfehlungen für die Gestaltung und Durchführung von Weiterbildung in Zeiten der Digitalisierung. N2 - The digital transformation of production processes is constantly progressing. The human workforce is a central success factor, but employees must be prepared for the requirements induced by change, using inter alia competence development. In reality, however, the content-related and pedagogical freedom to design vocational training is often inadequately addressed. Based on the changes trough digitization in production processes, the challenges of current continuing vocational training in enterprises are discussed. Recommendations for action are then derived and illustrated by examples. The recommendations for action can serve as a basis for the design and implementation of their further vocational training practice. KW - betriebliche Weiterbildungspraxis KW - Digitalisierung von Produktionsprozessen KW - gewerkschaftlich unterstützte Weiterbildungspraxis KW - Kompetenzentwicklung KW - vocational training KW - digitization of production processes KW - labour union education KW - competence development Y1 - 2020 U6 - https://doi.org/10.1365/s40702-020-00614-x SN - 1436-3011 SN - 2198-2775 VL - 57 SP - 512 EP - 527 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Gronau, Norbert T1 - Die Balanced ERP Scorecard (BESC) JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Wodurch zeichnen sich die besten ERP-Systeme aus? Diese Frage wird dem Autor dieses Beitrags immer wieder gestellt. Mit der Vorstellung der Balanced ERP Scorecard (BESC) besteht nun eine Möglichkeit, ein System aus verschiedenen Perspektiven zu bewerten und so individuell zu einer Einschätzung des für eine konkrete Unternehmenssituation besten Systems zu gelangen. Daher beschreibt dieser Beitrag zunächst die Perspektiven der BESC und dann mögliche Kriterien für eine Ausgestaltung dieser Scorecard. Y1 - 2020 U6 - https://doi.org/10.30844/ERP-II_20-2_6-9 SN - 1860-6725 IS - 2 SP - 6 EP - 9 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert A1 - Teichmann, Malte T1 - ERP-Auswahl für ein Professional Services Unternehmen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die Branche der Dienstleistungsunternehmen (Professional Services) hat einige Anforderungen, die sie von den „klassischen“ ERP-Branchen Industrie und Handel unterscheidet. Dieser Beitrag beschreibt einige der aktuellen Herausforderungen dieses immer wichtiger werdenden Wirtschaftszweigs und geht dann am Beispiel eines mittelständischen Ingenieurdienstleisters auf typische Anforderungen dieser Branche, infrage kommende Systeme und das Vorgehen zur Auswahl ein. KW - ERP-Systeme KW - ERP-Auswahl KW - Auswahlvorgehen KW - Professional Services Unternehmen Y1 - 2020 U6 - https://doi.org/10.30844/ERP_20-2_31-35 SN - 1860-6725 VL - 16 IS - 2 SP - 31 EP - 35 PB - Gito mbh Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Knost, Dennis A1 - Gronau, Norbert T1 - Serious games in learning factories BT - perpetuating knowledge in learning loops by game-based learning JF - Procedia manufacturing N2 - The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated. KW - game-based learning KW - gamification KW - serious game KW - learning factories Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.104 SN - 2351-9789 VL - 45 SP - 259 EP - 264 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Gronau, Norbert T1 - Handlungsmuster der Feuerwehr für das Störungsmanagement? JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Einsatzorganisationen, wie z. B. Feuerwehr oder Technisches Hilfs-werk, müssen sehr schnell auf teilweise unbekannte Lagen reagieren und angemessene Hilfeleistung erbringen. Können Handlungsweisen und vorbereitende Maßnahmen dieser Organisationen auf die Störungsbeseitigung in Produktionssystemen übertragen werden? Ein Experiment in einem Cyber-Physischen Produktionssystem geht dieser Frage nach. Es zeigt sich, dass durch die Anwendung geeigneter Handlungsmuster sowohl die Dauer von Störungen als auch die Zeit für die Behebung verkürzt werden können. Y1 - 2020 U6 - https://doi.org/10.3139/104.112227 SN - 2511-0896 SN - 0947-0085 VL - 115 IS - 1-2 SP - 82 EP - 85 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Ullrich, André A1 - Gronau, Norbert T1 - Bestimmung nachhaltiger Anwendungssystemarchitekturen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die teilweise sehr kurzfristig notwendige Reaktion auf Veränderungen erfordert von Unternehmen ein hohes Maß an Flexibilität und Reaktionsgeschwindigkeit. Anwendungssystemarchitekturen, die im Wesentlichen aus alten und selbst entwickelten Systemen bestehen, erfüllen häufig diese Anforderungen nicht. Investitionsmittel für neue Software sind jedoch begrenzt, daher müssen Prioritäten in der Ablösung von Altsystemen gesetzt werden. Eine effiziente Analysemethode zur Planung der Erneuerung der Anwendungssystemlandschaft stellt die Wandlungsfähigkeitsanalyse dar. Dieser Beitrag beschreibt Vorgehen und Ergebnisse am Beispiel eines international tätigen Automobilzulieferers. N2 - The sometimes necessary reaction to changes requires a high degree of adaptability and speed of reaction from companies. Application system architectures, which essentially consist of old and self-developed systems, often do not meet these requirements. However, investment funds for new software are limited, so priorities must be set in the replacement of old systems. An efficient analysis method for planning the renewal of the application system landscape is the adaptability analysis. This article describes the procedure and results using the example of an internationally active automotive supplier. KW - Anpassungsfähigkeit KW - Anwendungssystemarchitekturen KW - Bewertung KW - adaptability KW - application system architectures KW - assessment Y1 - 2020 UR - https://www.wiso-net.de/document/ERP__1ba9f709bedd19d76acba5daebbc08c9befe5b9f U6 - https://doi.org/10.30844/ERP_20-1_54-57 SN - 1860-6725 VL - 16 IS - 1 SP - 54 EP - 57 PB - GITO mbH CY - Berlin ER - TY - JOUR A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ullrich, André T1 - Konsens-Algorithmen von Blockchain BT - eine Betrachtung der Nachhaltigkeit der Konsensfindung JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Neben dem enormen Kursanstieg des Bitcoins in den Jahren 2017/2018, stieg im gleichen Maß auch die benötigte Rechenleistung und der damit verbundene Elektrizitätsbedarf, um Blöcke innerhalb der Bitcoin-Blockchain zu verifizieren. Aus diesem Problem ableitend beschäftigt sich dieser Beitrag mit der Fragestellung, welchen Beitrag unterschiedliche Konsens-Algorithmen innerhalb einer Blockchain zur Nachhaltigkeit liefern. Im Ergebnis liegt ein Überblick über die meist genutzten Konsens-Algorithmen und deren Beitrag zur Nachhaltigkeit vor. KW - Konsens-Algorithmen KW - Blockchain KW - proof of work KW - proof of stake KW - delegated proof of stake KW - Nachhaltigkeit Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-1_S29-32 SN - 2364-9208 VL - 36 IS - 1 SP - 29 EP - 32 PB - Gito CY - Berlin ER - TY - JOUR A1 - Dragičević, Nikolina A1 - Ullrich, André A1 - Tsui, Eric A1 - Gronau, Norbert T1 - A conceptual model of knowledge dynamics in the industry 4.0 smart grid scenario JF - Knowledge management research & practice : KMRP N2 - Technological advancements are giving rise to the fourth industrial revolution - Industry 4.0 -characterized by the mass employment of smart objects in highly reconfigurable and thoroughly connected industrialproduct-service systems. The purpose of this paper is to propose a theory-based knowledgedynamics model in the smart grid scenario that would provide a holistic view on the knowledge-based interactions among smart objects, humans, and other actors as an underlyingmechanism of value co-creation in Industry 4.0. A multi-loop and three-layer - physical, virtual, and interface - model of knowledge dynamics is developedby building on the concept of ba - an enabling space for interactions and theemergence of knowledge. The model depicts how big data analytics are just one component inunlocking the value of big data, whereas the tacit engagement of humans-in-the-loop - theirsense-making and decision-making - is needed for insights to be evoked fromanalytics reports and customer needs to be met. KW - Industry 4.0 KW - tacit knowledge KW - humans-in-the-loop KW - big data analytics KW - internet of things and services KW - smart grid Y1 - 2020 U6 - https://doi.org/10.1080/14778238.2019.1633893 SN - 1477-8238 SN - 1477-8246 VL - 18 IS - 2 SP - 199 EP - 213 PB - Taylor & Francis CY - London [u.a.] ER - TY - JOUR A1 - Lass, Sander A1 - Gronau, Norbert T1 - A factory operating system for extending existing factories to Industry 4.0 JF - Computers in industry : an international, application oriented research journal N2 - Cyber-physical systems (CPS) have shaped the discussion about Industry 4.0 (I4.0) for some time. To ensure the competitiveness of manufacturing enterprises the vision for the future figures out cyber-physical production systems (CPPS) as a core component of a modern factory. Adaptability and coping with complexity are (among others) potentials of this new generation of production management. The successful transformation of this theoretical construct into practical implementation can only take place with regard to the conditions characterizing the context of a factory. The subject of this contribution is a concept that takes up the brownfield character and describes a solution for extending existing (legacy) systems with CPS capabilities. KW - Factory operating system KW - CPPS KW - CPS KW - Decentralized production control KW - Industry 4.0 KW - retrofit Y1 - 2019 U6 - https://doi.org/10.1016/j.compind.2019.103128 SN - 0166-3615 SN - 1872-6194 VL - 115 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Gronau, Norbert T1 - Fabriksoftware BT - eine Typologie JF - Fabriksoftware : die digitale Fabrik realisieren N2 - Immer mehr Konzepte versprechen die Digitale Fabrik, die Industrie 4.0-Fabrik, die Smart Factory usw. Allen ist gemeinsam, dass dahinter der erheblich ausgeweitete Einsatz von vernetzter Software steht. Allein der Begriff Fabriksoftware selbst ist noch nicht definiert bzw. gegenüber nahestehenden Begriffen abgegrenzt. Der vorliegende Beitrag stellt dazu einen für Forschung und Praxis tauglichen Ansatz zur Einordnung von Software in Fertigung und Logistik vor. N2 - More and more concepts promise the Digital Factory, the Industry 4.0 Factory, the Smart Factory etc. What they all have in common is that they are based on the considerably expanded use of networked software is up and running. However, the term Factory Software itself is not yet defined or is not yet defined or delimited from adjacent terms. The present contribution presents a for research and practice suitable approach for the classification of software in production and logistics. KW - Fabriksoftware KW - MES KW - Klassifikationsschema KW - factory software KW - classification scheme Y1 - 2020 U6 - https://doi.org/10.30844/FS20-2_17-20 SN - 2569-7692 VL - 25 IS - 2 SP - 17 EP - 20 PB - GITO CY - Berlin ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ritter, Ann-Carolin T1 - Crowdsourcing bei industriellen Innovationen T1 - Crowdsourcing for industrial innovations BT - Lösungsansätze und Herausforderung für KMU BT - solutions and challenges for SMEs JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Innovationstätigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungstätigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte“ Produkte und die Kopplung an Dienstleistungen erfordert häufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen können. Crowdsourcing stellt eine Möglichkeit dar, den Innovationsprozess für externe Akteure zu öffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf. N2 - Innovation activity in the industrial environment is shifting towards product-service systems as a result of digitalisation. Small and medium-sized enterprises have so far focused their development activities strongly on product development. The switch to “smart” products and the coupling to services often requires personnel and financial resources that SMEs cannot provide. Crowdsourcing is one way of opening up the innovation process to external actors and realising cost and speed advantages. However, the integration of crowdsourcing elements faces several challenges. This article shows both the potentials and the barriers of crowdsourcing in the industrial environment. KW - Crowdsourcing KW - industrielle Innovationen KW - KMU KW - industrial innovation KW - SMEs Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-6_S9-13 SN - 2364-9208 VL - 36 IS - 6 SP - 9 EP - 13 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Gronau, Norbert T1 - Process model driven learning scenario implementation JF - Procedia manufacturing N2 - The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before. KW - learning factories KW - learning scenario implementation KW - process modelling Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.071 SN - 2351-9789 VL - 45 SP - 522 EP - 527 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Vladova, Gergana A1 - Wotschack, Philip A1 - Lareiro, Patricia de Paiva A1 - Gronau, Norbert A1 - Thim, Christof T1 - Lernen mit Assistenzsystemen T1 - Learning with assistance systems BT - vor lauter Aufgaben den Prozess nicht sehen? BT - not seeing the process for the tasks? JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Der Beitrag beschreibt die Konzeption und Durchführung und bietet einen Einblick in die ersten Ergebnisse einer Untersuchung mit experimentellem Design in einer simulierten Prozessumgebung im Forschungs- und Anwendungszentrum Industrie 4.0 in Potsdam. Im Mittelpunkt stehen Anlernprozesse im Bereich der Einfacharbeit (Helfertätigkeiten) und ihre Gestaltung durch den Einsatz digitaler Assistenzsysteme. In der Arbeitsforschung finden sich Hinweise darauf, dass mit dem Einsatz dieser Systeme Prozesswissen verloren geht, im Sinne einer guten Kenntnis des gesamten Arbeitsprozesses, in den die einzelnen Tätigkeiten eingebettet sind. Das kann sich als Problem erweisen, vor allem wenn unvorhersehbare Situationen oder Fehler eintreten. Um die Rolle von Prozesswissen beim Einsatz von digitalen Assistenzsystemen zu untersuchen, wird im Experiment eine echte Fabriksituation simuliert. Die Probanden werden über ein Assistenzsystem Schritt für Schritt in ihre Aufgabentätigkeit angelernt, einem Teil der Probanden wird allerdings am Anfang zusätzlich Prozesswissen im Rahmen einer kurzen Schulung vermittelt. N2 - The paper describes the conception and implementation as well as offers an insight into the first results of a study with experimental design in a simulated process environment at the Research and Application Center Industry 4.0 in Potsdam. The focus is on learning processes in the field of simple work and their organization through the use of digital assistance systems. In labour research, there are indications that process knowledge is lost with the use of these systems, in the sense of a good knowledge of the entire work process in which the individual activities are embedded. To investigate the role of process knowledge in the use of digital assistance systems, a real factory situation is simulated in the experiment. KW - Assistenzsysteme KW - Industrie 4.0 KW - Prozesswissen KW - Lernfabrik KW - assistance systems KW - industry 4.0 KW - process knowledge KW - learning factory Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-3_S16-20 SN - 2364-9208 VL - 36 IS - 3 SP - 16 EP - 20 PB - GITO mbH Verlag CY - Berlin ER - TY - JOUR A1 - Weber, Edzard A1 - Tiefenbacher, Anselm A1 - Gronau, Norbert T1 - Need for Standardization and Systematization of Test Data for Job-Shop Scheduling JF - Data N2 - The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research. KW - job shop scheduling KW - JSP KW - social network analysis KW - method comparision Y1 - 2019 U6 - https://doi.org/10.3390/data4010032 SN - 2306-5729 VL - 4 IS - 1 PB - MDPI CY - Basel ER - TY - JOUR A1 - Gronau, Norbert T1 - Determining the appropriate degree of autonomy in cyber-physical production systems JF - CIRP Journal of Manufacturing Science and Technology N2 - Existing factories face multiple problems due to their hierarchical structure of decision making and control. Cyber-physical systems principally allow to increase the degree of autonomy to new heights. But which degree of autonomy is really useful and beneficiary? This paper differentiates diverse definitions of autonomy and approaches to determine them. Some experimental findings in a lab environment help to answer the question raised in this paper. KW - Cyber-phyiscal system KW - Degree of autonomy KW - Simulation KW - Production system Y1 - 2019 U6 - https://doi.org/10.1016/j.cirpj.2019.05.001 SN - 1755-5817 VL - 26 SP - 70 EP - 80 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Schüffler, Arnulf A1 - Thim, Christof A1 - Haase, Jennifer A1 - Gronau, Norbert A1 - Kluge, Annette T1 - Information processing in work environment 4.0 and the beneficial impact of intentional forgetting on change management T1 - Informationsverarbeitung in der Industrie 4.0 und die vorteilhafte Wirkung von intentionalem Vergessen für das Change Management JF - Zeitschrift für Arbeits- und Organisationspsychologie : german journal of work and organizational psychology N2 - Industry 4.0, based on increasingly progressive digitalization, is a global phenomenon that affects every part of our work. The Internet of Things (IoT) is pushing the process of automation, culminating in the total autonomy of cyber-physical systems. This process is accompanied by a massive amount of data, information, and new dimensions of flexibility. As the amount of available data increases, their specific timeliness decreases. Mastering Industry 4.0 requires humans to master the new dimensions of information and to adapt to relevant ongoing changes. Intentional forgetting can make a difference in this context, as it discards nonprevailing information and actions in favor of prevailing ones. Intentional forgetting is the basis of any adaptation to change, as it ensures that nonprevailing memory items are not retrieved while prevailing ones are retained. This study presents a novel experimental approach that was introduced in a learning factory (the Research and Application Center Industry 4.0) to investigate intentional forgetting as it applies to production routines. In the first experiment (N = 18), in which the participants collectively performed 3046 routine related actions (t1 = 1402, t2 = 1644), the results showed that highly proceduralized actions were more difficult to forget than actions that were less well-learned. Additionally, we found that the quality of cues that trigger the execution of routine actions had no effect on the extent of intentional forgetting. N2 - Industrie 4.0 ist basierend auf fortschreitender Digitalisierung eine globale Entwicklung, die in allen Bereichen uns heute bekannter Arbeits- und Lebenswelten Einzug halten wird. Das Internet der Dinge beschleunigt Automatisierung bis hin zu autonomen cyber-physischen Systemen. Dieser Prozess wird begleitet von einer weiteren Zunahme von Daten. Gleichzeitig reduziert sich die Aktualität der Daten und damit die Dauer ihrer Relevanz. Die Herausforderungen im Umfeld von Industrie 4.0 zu meistern bedeutet für Menschen in Organisationen diese wachsenden Datenmengen und Anpassung an fortwährende Veränderung zu bewältigen. Intentionales Vergessen kann hier unterstützen. Intentionales Vergessen fokussiert das Vergessen irrelevanter Informationen und Verhaltensweisen zu Gunsten relevanter. In diesem Artikel stellen wir einen experimentellen Ansatz zur Erforschung von Prozessen des intentionalen Vergessens in Organisationen in einer Laborumgebung (Anwendungszentrum Industrie 4.0) vor. Im Fokus der Untersuchung steht dabei das Vergessen einer ungültig gewordenen Produktions-Routine und das Ausführen der neuen, jetzt gültigen. Wir beschreiben dabei zunächst das innovative experimentelle Design zur Untersuchung von Vergessensprozessen. In einer ersten Untersuchung mit N = 18 Personen, die insgesamt 3046 Handlungen zu t1 (1402) und t2 (1644) ausführen, zeigte sich, dass hoch gelernte (prozeduralisierte) Handlungen schwerer zu vergessen sind als ohnehin nicht prozeduralisierte. Es zeigt sich aber kein Unterschied hinsichtlich der Art der Handlungen und der Hinweisreize, durch die sie aufgerufen werden. KW - intentional forgetting KW - retrieval cues KW - production routine KW - intentionales Vergessen KW - Produktions-Routine KW - Hinweisreize Y1 - 2019 U6 - https://doi.org/10.1026/0932-4089/a000307 SN - 0932-4089 SN - 2190-6270 VL - 64 IS - 1 SP - 17 EP - 29 PB - Hogrefe CY - Göttingen ER - TY - JOUR A1 - Schüffler, Arnulf A1 - Thim, Christof A1 - Haase, Jennifer A1 - Gronau, Norbert A1 - Kluge, Annette T1 - Willentliches Vergessen T1 - Intentional forgetting - precondition for flexibility and adaptivity in a permanent changing world BT - Voraussetzung für Flexibilität und Veränderungsfähigkeit in einer sich permanent verändernden Welt JF - Gruppe. Interaktion. Organisation. Zeitschrift für Angewandte Organisationspsychologie (GIO) N2 - Dieser Beitrag im Journal Gruppe. Interaktion. Organisation. stellt dar, wie willentliches Vergessen die Anpassung an notwendige Veränderungen für Individuen, Gruppen und Organisationen verbessert und wie willentliches Vergessen bewusst und gezielt gestaltet werden kann. Damit Verhalten in Folge einer notwendigen Veränderung angepasst wird, reicht es nicht aus, dass Menschen wissen was zu tun ist, willens und in der Lage sind ihr Verhalten zu verändern. Eine Veränderung gelingt nur dann, wenn nur noch das neue Verhalten zur Anwendung kommt und nicht mehr das Alte, wenn das alte Verhalten vergessen wird. Der notwendige Prozess des willentlichen Vergessens ist durch Entfernen von Hinweisreizen, die die Erinnerung des zu Vergessenden und durch Platzierung von Hinweisreizen, die die Aktivierung des Neuen auslösen, gestaltbar. Der vorliegende Beitrag stellt die förderliche Wirkung von Hinweisreizen auf willentliches Vergessen dar, stellt sie im Rahmen des Berichts einer experimentellen Studie unter Beweis und gibt praktische Implikationen, wie für Individuen, Gruppen und Organisationen willentliches Vergessen gestaltet werden kann. N2 - This paper in the journal Gruppe. Interaktion. Organisation. illustrates how intentional forgetting can improve the adaptation to necessary changes for individuals, groups and organizations, and how intentional forgetting can be consciously and purposefully designed.In order for behavior to be adapted as aresult of necessary change, it is not enough for people to know what to do, to be willing and able to change their behavior. Achange succeeds only if the new behavior is activated and not the old one, if the old behavior is forgotten. The necessary process of intentional forgetting can be designed by removing cues that retrieve memory items to be forgotten and placing cues that trigger the retrieval of the new.This paper presents the beneficial effects of cues on intentional forgetting, proves them in the context of areport of an experimental study and gives practical implications on how to design intentional forgetting for individuals, groups and organizations. KW - Intentional forgetting KW - Retrieval cues KW - Change KW - Adaptation KW - Behavior KW - Willentliches Vergessen KW - Hinweisreize KW - Veränderung KW - Anpassung KW - Verhalten Y1 - 2019 U6 - https://doi.org/10.1007/s11612-019-00466-0 SN - 2366-6145 SN - 2366-6218 VL - 50 IS - 2 SP - 197 EP - 209 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Gronau, Norbert T1 - Industrie 4.0 JF - Von Industrial Internet of Things zu Industrie 4.0. Band 2 Y1 - 2018 SN - 978-3-95545-261-2 SP - 191 EP - 228 PB - Gito CY - Berlin ER - TY - JOUR A1 - Grum, Marcus A1 - Bender, Benedict A1 - Alfa, A. S. A1 - Gronau, Norbert T1 - A decision maxim for efficient task realization within analytical network infrastructures JF - Decision support systems : DSS ; the international journal N2 - Faced with the increasing needs of companies, optimal dimensioning of IT hardware is becoming challenging for decision makers. In terms of analytical infrastructures, a highly evolutionary environment causes volatile, time dependent workloads in its components, and intelligent, flexible task distribution between local systems and cloud services is attractive. With the aim of developing a flexible and efficient design for analytical infrastructures, this paper proposes a flexible architecture model, which allocates tasks following a machine-specific decision heuristic. A simulation benchmarks this system with existing strategies and identifies the new decision maxim as superior in a first scenario-based simulation. KW - Analytics KW - Architecture concepts KW - Cyber-physical systems KW - Internet of things KW - Task realization strategies KW - Simulation Y1 - 2018 U6 - https://doi.org/10.1016/j.dss.2018.06.005 SN - 0167-9236 SN - 1873-5797 VL - 112 SP - 48 EP - 59 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Gronau, Norbert A1 - Ulrich, Andre A1 - Bender, Benedict T1 - Hybride Lernfabrik im Anwendungszentrum Industrie 4.0 JF - Industrial Internet of Things in der Arbeits- und Betriebsorganisation Y1 - 2017 SN - 978-3-95545-225-4 SP - 1 EP - 23 PB - Gito CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert T1 - Trends in der ERP Branche JF - Die Rolle von ERP-Systemen im Zeitalter der Digitalisierung Y1 - 2017 SN - 978-3-95545-197-4 SP - 85 EP - 109 PB - Gito CY - Berlin ER - TY - JOUR A1 - Fröming, Jane A1 - Schmid, Simone A1 - Rüßbüldt, Uwe A1 - Gronau, Norbert T1 - Anforderungs- und wissensorientierte Zusammenstellung von Projektteams JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 85 EP - 91 PB - GITO CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert A1 - Vladova, Gergana A1 - Weber, Nadja A1 - Heinze, Priscilla A1 - Weber, Edzard T1 - KMDL® v2.2 BT - Eine semiformale Beschreibungssprache zur Modellierung von Wissenskonversionen JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 133 EP - 198 PB - GITO CY - Berlin ER - TY - JOUR A1 - Geers, Dennis A1 - Jochem, Roland A1 - Heinze, Priscilla A1 - Gronau, Norbert T1 - Qualität in wissensintensiven Geschäftsprozessen BT - ein neuer Ansatz für die Qualitätsmessung JF - Handbuch prozessorientiertes Wissensmanagement Y1 - 2014 SN - 978-3-95545-026-7 SP - 349 EP - 357 PB - GITO CY - Berlin ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert T1 - Berücksichtigung der Geschäftsprozesse bei Personalplanung erzeugt Wissenszuwachs JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 201 EP - 208 PB - GITO CY - Berlin ER - TY - JOUR A1 - Bahrs, Julian A1 - Gronau, Norbert T1 - Ungenutzte Potenziale im Wissensmanagment BT - Stand der Praxis JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 5 EP - 12 PB - GITO CY - Berlin ER - TY - JOUR A1 - Adelhelm, Silvia A1 - Braun, Andreas A1 - Gronau, Norbert A1 - Lürig, Detlef A1 - Müller, Elisabeth A1 - Vladova, Gergana A1 - Wagner, Dieter T1 - Mit Open Innovation zum Erfolg BT - So verbessern mittelständische Pharmaunternehmen ihre Innovationsprozesse JF - Handbuch prozessorientiertes Wissensmanagment Y1 - 2014 SN - 978-3-95545-026-7 SP - 211 EP - 226 PB - GITO CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert T1 - Vom Lead zum Abschluss - Kundenkommunikation mit social media und special interest Y1 - 2012 SN - 978-3-942183-83-3 ER - TY - JOUR A1 - Müller, Claudia A1 - Gronau, Norbert T1 - Bildung von sozialen Netzwerken in Anwendungen der Social Software JF - Analyse sozialer Netzwerke und Social Software Y1 - 2010 SN - 978-3-940019-26-4 SP - 1 EP - 23 PB - GITO CY - Berlin ER - TY - JOUR A1 - Weber, Edzard A1 - Stein, Maureen A1 - Gronau, Norbert T1 - Demokratieorientierte eGovernment-Systeme Y1 - 2009 SN - 978-3-89864- 590-4 ER - TY - JOUR A1 - Gronau, Norbert A1 - Reger, Guido A1 - Adelhelm, Silvia A1 - Bahrs, Julian A1 - Vladova, Gergana T1 - Planung und Steuerung von offenen Innovationsprozessen in Life Sciences KMUs : Pro und Contra des Know-how- Transfers über die Unternehmensgrenzen Y1 - 2009 SN - 1434-1890 ER - TY - JOUR A1 - Eggert, Sandy A1 - Gronau, Norbert T1 - Modellbasierte Auswahl von ERP-Systemen Y1 - 2009 SN - 0931-9077 ER - TY - JOUR A1 - Gronau, Norbert T1 - Der Wettbewerb zum ERP-System des Jahres 2008 : Verfahren und Ergebnisse Y1 - 2009 SN - 1860-6725 ER - TY - JOUR A1 - Andresen, Katja A1 - Gronau, Norbert T1 - Adjustment strategies for managing unanticipated changes in software development processes Y1 - 2009 UR - http://www.wi2009.at/ SN - 978-3-85403-246-5 ER - TY - JOUR A1 - Gronau, Norbert A1 - Sielaff, S A1 - Röchert-Voigt, Tanja A1 - Stein, Maureen A1 - Weber, Edzard T1 - Change capability of protection systems Y1 - 2009 SN - 978-1-8456-4202-0 ER - TY - JOUR A1 - Weber, Edzard A1 - Stein, Maureen A1 - Gronau, Norbert T1 - Demokratieorientierte eGovernment-Systeme Y1 - 2009 SN - 1436 - 3011 ER - TY - JOUR A1 - Gronau, Norbert T1 - Mobility creates process proximity Y1 - 2009 SN - 1434-2308 ER - TY - JOUR A1 - Gronau, Norbert T1 - IT-Business Alignment und Wandlungsfähigkeit von Informationssystemen N2 - Die Wandlungsfähigkeit von Informationssystemen hilft, den notwendigen Wandel bei der Ausrichtung der IT- Architektur an das Geschäftsmodell zu bewältigen. Der Beitrag stellt das Konzept der Wandlungsfähigkeit vor und beschreibt, wann Unternehmen Wandlungsfähigkeit brauchen und wie diese Wandlungsfähigkeit gemessen wird. Y1 - 2008 SN - 1434-1980 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert A1 - Sultanow, Eldar T1 - MDA-Werkzeuge : Softwareautomaten ; im Vergleich: jABC, AndroMDA und OpenArchitectureWare Y1 - 2008 SN - 0935-9680 ER - TY - JOUR A1 - Gronau, Norbert A1 - Levina, Olga T1 - Gestaltung und Beherrschung naturanaloger Produktionsprozesse Y1 - 2008 SN - 1434-2308 ER - TY - JOUR A1 - Gronau, Norbert A1 - Lämmer, Anne A1 - Müller, C. T1 - Selbstorganisierte Dienstleistungsnetzwerke im Maschinen- und Anlagenbau Y1 - 2008 ER - TY - JOUR A1 - Gronau, Norbert T1 - ERP-Lösungen erschließen neue Märkte Y1 - 2008 ER - TY - JOUR A1 - Gronau, Norbert A1 - Stein, Maureen A1 - Eggert, Sandy A1 - Lämmer, Anne T1 - Integration öffentlicher Anwendungslandschaften Y1 - 2008 ER - TY - JOUR A1 - Lämmer, Anne A1 - Eggert, Sandy A1 - Gronau, Norbert T1 - A procedure model for a SoA-based integration of enterprise systems Y1 - 2008 SN - 1548-1115 ER - TY - JOUR A1 - Gronau, Norbert A1 - Bahrs, Julian A1 - Peters, Kirstin T1 - Selbstlernende Suchmaschine als zentraler Informationszugang im Unternehmen Y1 - 2008 SN - 1434-1980 ER - TY - JOUR A1 - Gronau, Norbert T1 - Der Wettbewerb "ERP-System des Jahres 2007" : Verfahren und Ergebnisse Y1 - 2008 SN - 1860-6725 ER - TY - JOUR A1 - Brockmann, Carsten A1 - Gronau, Norbert A1 - Sultanow, Eldar T1 - ERP und MES : Teil 3 Y1 - 2008 SN - 1617-948X ER - TY - JOUR A1 - Eggert, Sandy A1 - Gronau, Norbert T1 - Erhöhung der Wandlungsfähigkeit von ECM-Lösungen unter Verwendung kartographischer Gestaltungsmittel Y1 - 2008 SN - 978-3-940019-34-9 ER - TY - JOUR A1 - Gronau, Norbert A1 - Bahrs, Julian T1 - Zentraler Informationszugang im Unternehmen : selbstlernende Suchmaschine für profil- und kontextorientierte Suche Y1 - 2008 SN - 978-3-940019-49-3 ER - TY - JOUR A1 - Bahrs, Julian A1 - Gronau, Norbert T1 - Ungenutzte Potenziale im Wissensmanagement : Stand der Praxis Y1 - 2008 UR - http://www.wiso-net.de/webcgi?START=DC0&IV_DBN=WIM SN - 1438-4426 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane A1 - Schmid, Simone T1 - Kompetenzorientiertes Staffing als Beitrag zur Beschäftigungssicherung Y1 - 2007 SN - 978-3-8349-1094-3 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert A1 - Aethner, Christian T1 - Innovativer Groupwareeinsatz in Lehre und Forschung Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert T1 - ERP-Systeme in öffentlichen Verwaltungen : Aktuelle Trends und Kooperationsformen Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert T1 - Der Wettbewerb ERP-System des Jahres Verfahren und Ergebnisse Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert T1 - Wirtschaftlichkeit der produktionsnahen IT Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert T1 - Bon appétit! Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert A1 - Schmid, Simone A1 - Lindemann, Marcus T1 - RoI-basierte Auswahl von ERP-Systemen Y1 - 2007 SN - 978-3- 940019-23-3 ER - TY - JOUR A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - Ableitung von IT-Strategien für die Produktion Y1 - 2007 SN - 978- 3-8350-0932-5 ER - TY - JOUR A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - RoI-Analyse : die Wirtschaftlichkeit von MES-Systemen Y1 - 2007 ER - TY - JOUR A1 - Lindemann, Marcus A1 - Schmid, Simone A1 - Gronau, Norbert T1 - Wirtschaftlichkeitsbewertung von Manufacturing Execution Systems Y1 - 2007 ER - TY - JOUR A1 - Lindemann, Marcus A1 - Gronau, Norbert T1 - RoI-Analyse für ERP-Systeme in Einzelfertigung und Anlagenbau Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert A1 - Schmid, Simone A1 - Bahrs, Julian T1 - Wissen erfolgreich managen Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - RFID : Innovative industrielle Anwendungen Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - Wirtschaftlichkeitsbewertung der Einführung von Manufacturing Execution Systems, Return-on-Investment- Analyzer entwickelt Y1 - 2007 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert T1 - KMDL : eine semiformale Beschreibungssprache zur Modellierung von Wissenskonversionen Y1 - 2007 SN - 978-3-936771-98-5 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert T1 - Berücksichtigung der Geschäftsprozesse bei der Personalplanung erzeugt Wissenszuwachs Y1 - 2007 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane A1 - Schmid, Simone A1 - Rüssbüldt, Uwe T1 - Approach for requirement oriented team building in industrial processes N2 - This contribution presents an approach for requirement oriented team building in industrial processes like product development. This will be based on the knowledge modelling and description language (KMDL(R)) that enables the modelling and analysis of knowledge intensive business processes. First the basic elements of the modelling technique are described, presenting the concept and the description language. Furthermore it is shown how the KMDL(R) process models can be used as a basis for the team building component. Therefore, an algorithm was developed that is able to propose a team composition for a specific task by analyzing the knowledge and skills of the employees, which will be contrasted to the process requirements. This can be used as guidance for team building decisions. Y1 - 2007 UR - http://www.sciencedirect.com/science/journal/01663615 U6 - https://doi.org/10.1016/j.compind.2006.09.011 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane A1 - Korf, Roman T1 - Modellierung und Analyse wissensintensiver Aktivitäten in einem Geschäftsprozess mit der Knowledge Modeling and Description Language Y1 - 2006 SN - 3-88579-176-5 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane A1 - Schmid, Simone A1 - Rüssbüldt, Uwe T1 - Softwaregestütztes Staffing zur kompetenzorientierten Zusammenstellung von Projektteams Y1 - 2006 SN - 978-3-936771-86-2 ER - TY - JOUR A1 - Gronau, Norbert A1 - Müller, Claudia T1 - Wissensmanagement in Wertschöpfungsnetzwerken Y1 - 2006 SN - 3-8350-0463-8 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane A1 - Schmid, Simone T1 - Skill Management Y1 - 2006 ER - TY - JOUR A1 - Andresen, Katja A1 - Laemmer, Anne A1 - Gronau, Norbert T1 - Vorgehensmodell zur Ermittlung der Wandlungsfähigkeit von ERP-Systemen Y1 - 2006 ER - TY - JOUR A1 - Müller, C. A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Requirements for an integration of methods analyzing social issues in knowledge organizations Y1 - 2006 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert A1 - Schmid, Simone T1 - Improvement of Software Engineering by Modeling of Knowledge-Intensive Business Processes Y1 - 2006 ER - TY - JOUR A1 - Gronau, Norbert A1 - Wildemann, H. A1 - Zaeh, M. F. A1 - Mueller, N. A1 - Lämmer, Anne A1 - Andresen, Katja T1 - Tools zur Ermittlung der Wandlungsfähigkeit Y1 - 2006 ER - TY - JOUR A1 - Gronau, Norbert A1 - Eggert, Sandy A1 - Stein, Moreen T1 - Deutsches Patent- und Markenamt : die Online-Patentanmeldung auf dem Prüfstand Y1 - 2006 ER - TY - JOUR A1 - Fröming, Jane A1 - Schmid, Simone A1 - Rüssbüldt, Uwe A1 - Gronau, Norbert T1 - Anforderungs- und wissensorientierte Zusammenstellung von Projektteams Y1 - 2006 ER - TY - JOUR A1 - Andresen, Katja A1 - Gronau, Norbert T1 - Managing Change : determining the adaptability of information systems Y1 - 2006 ER - TY - JOUR A1 - Fröming, Jane A1 - Gronau, Norbert T1 - Einsatz von Case-Based Reasoning in der Produktionssteuerung Y1 - 2006 ER - TY - JOUR A1 - Gronau, Norbert A1 - Müller, C. T1 - Von der Kommunikationsstrukturanalyse zur Knowledge Modeling and Description Language Y1 - 2006 SN - 978-3-540-28906-7 ER - TY - JOUR A1 - Lindemann, Marcus A1 - Schmid, Simone A1 - Gronau, Norbert A1 - Schumacher, J. T1 - Marktstudie zur kundenorientierten Weiterentwicklung von MES Y1 - 2006 ER - TY - JOUR A1 - Bahrs, Julian A1 - Schmid, Simone A1 - Gronau, Norbert T1 - Wissensmanagement : was bietet der Markt Y1 - 2006 ER - TY - JOUR A1 - Eggert, Sandy A1 - Gronau, Norbert T1 - Anbieter überschätzen Wandlungsfähigkeit ihrer ECM-Lösungen Y1 - 2006 ER - TY - JOUR A1 - Gronau, Norbert A1 - Schmid, Simone A1 - Lindemann, Marcus T1 - Investitionsreport MES Y1 - 2006 ER - TY - JOUR A1 - Gronau, Norbert A1 - Fröming, Jane T1 - KMDL : eine semiformale Beschreibungssprache zur Modellierung von Wissenskonversionen Y1 - 2006 UR - http://www.springerlink.com/content/0937-6429 U6 - https://doi.org/10.1007/s11576-006-0080-4 SN - 0937-6429 ER -