TY - CHAP A1 - Gronau, Norbert A1 - Grum, Marcus A1 - Bender, Benedict T1 - Determining the optimal level of autonomy in cyber-physical production systems T2 - IEEE 14th International Conference on Industrial Informatics (INDIN) N2 - Traditional production systems are enhanced by cyber-physical systems (CPS) and Internet of Things. A kind of next generation systems, those cyber-physical production systems (CPPS) are able to raise the level of autonomy of its production components. To find the optimal degree of autonomy in a given context, a research approach is formulated using a simulation concept. Based on requirements and assumptions, a cyber-physical market is modeled and qualitative hypotheses are formulated, which will be verified with the help of the CPPS of a hybrid simulation environment. KW - cyber-physical systems KW - hybrid simulation KW - Internet of Things KW - manufacturing systems KW - production engineering computing KW - cyber-physical production systems Y1 - 2017 U6 - https://doi.org/10.1109/INDIN.2016.7819367 SP - 1293 EP - 1299 PB - IEEE CY - New York ER - TY - CHAP A1 - Gronau, Norbert A1 - Rojahn, Marcel ED - Leupold, Andreas ED - Wiebe, Andreas ED - Glossner, Silke T1 - Das Industrial Internet of Things (IIOT) T2 - IT-Recht : Recht, Wirtschaft und Technik der digitalen Transformation Y1 - 2021 UR - https://beck-online.beck.de/Bcid/Y-400-W-LeupoldGlossnerHdbITR-GL-Teil10-1 SN - 978-3-406-74458-7 SP - 1115 EP - 1124 PB - C.H. Beck CY - München ET - 4., überarbeitet und erweitert ER - TY - BOOK A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - Einführung in das Informationsmanagement T3 - Skripte zur Wirtschaftsinformatik N2 - Dieses Buch bietet eine Einführung in das Informationsmanagement in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Der erste Teil des Buches gibt einen einführenden Überblick über die grundlegende Begriffe und Ansätze des Informationsmanagements. Es wird ein Modell des Informationsmanagements vorgestellt, auf dessen Basis die Aufgaben des Informationsmanagements in den folgenden Kapiteln vertieft werden. Der zweite Teil widmet sich der Informationswirtschaft und behandelt Informationsnachfrage und -angebot. Im dritten Teil des Buches werden die betrieblichen Informationssysteme mit ihren grundlegenden Bausteinen Daten und Prozesse thematisiert. Der vierte Teil gibt einen Überblick über Anwendungssysteme für die Produktion und die Aufgaben des Managements der Informations- und Kommunikationstechnik. Das abschließende Kapitel beinhaltet eine Diskussion relevanter Führungsaufgaben des Y1 - 2014 SN - 978-3-942183-07-9 PB - Gito CY - Berlin ET - durchgesehene Aufl. ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Wenz, Julian A1 - Gronau, Norbert T1 - Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung T1 - Challenges and recommended actions for in-company vocational training in times of digitization JF - HMD Praxis der Wirtschaftsinformatik N2 - Die Digitalisierung von Produktionsprozessen schreitet mit einer hohen Intensität voran. Weiterbildung hat eine hohe Relevanz für betriebliche Transformationsprozesse. Die betriebliche Weiterbildungspraxis ist den aktuellen Herausforderungen der Digitalisierung jedoch nicht gewachsen. Herausforderungen sind Kompetenzlücken der Mitarbeiter, ungewisse Anforderungsprofile und Tätigkeitstypen, demographischer Wandel sowie veraltete didaktische Ansätze. Zudem wird bestehender inhaltlicher und pädagogischer Freiraum bei der Gestaltung von Weiterbildung oftmals nur unzureichend ausgenutzt. Die skizzierte Situation führt dazu, dass der Mehrwert gegenwärtiger Qualifizierungsangebote sowohl für Unternehmen als auch Beschäftigte nicht ausgeschöpft wird. Ausgehend von Veränderungen durch Digitalisierung in der Produktion und deren Auswirkungen auf die Kompetenzentwicklung diskutiert dieser Beitrag Herausforderungen gegenwärtiger betrieblicher Weiterbildung. Er leitet Handlungsempfehlungen ab, die mithilfe von Beispielen gewerkschaftlich unterstützter Weiterbildungspraxis illustriert werden. Im Ergebnis erhalten Interessierte einen Überblick über gegenwärtige Herausforderungen und Handlungsempfehlungen für die Gestaltung und Durchführung von Weiterbildung in Zeiten der Digitalisierung. N2 - The digital transformation of production processes is constantly progressing. The human workforce is a central success factor, but employees must be prepared for the requirements induced by change, using inter alia competence development. In reality, however, the content-related and pedagogical freedom to design vocational training is often inadequately addressed. Based on the changes trough digitization in production processes, the challenges of current continuing vocational training in enterprises are discussed. Recommendations for action are then derived and illustrated by examples. The recommendations for action can serve as a basis for the design and implementation of their further vocational training practice. KW - betriebliche Weiterbildungspraxis KW - Digitalisierung von Produktionsprozessen KW - gewerkschaftlich unterstützte Weiterbildungspraxis KW - Kompetenzentwicklung KW - vocational training KW - digitization of production processes KW - labour union education KW - competence development Y1 - 2020 U6 - https://doi.org/10.1365/s40702-020-00614-x SN - 1436-3011 SN - 2198-2775 VL - 57 SP - 512 EP - 527 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Gronau, Norbert T1 - Die Balanced ERP Scorecard (BESC) JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Wodurch zeichnen sich die besten ERP-Systeme aus? Diese Frage wird dem Autor dieses Beitrags immer wieder gestellt. Mit der Vorstellung der Balanced ERP Scorecard (BESC) besteht nun eine Möglichkeit, ein System aus verschiedenen Perspektiven zu bewerten und so individuell zu einer Einschätzung des für eine konkrete Unternehmenssituation besten Systems zu gelangen. Daher beschreibt dieser Beitrag zunächst die Perspektiven der BESC und dann mögliche Kriterien für eine Ausgestaltung dieser Scorecard. Y1 - 2020 U6 - https://doi.org/10.30844/ERP-II_20-2_6-9 SN - 1860-6725 IS - 2 SP - 6 EP - 9 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Gronau, Norbert A1 - Weber, Edzard A1 - Wander, Paul A1 - Ullrich, André ED - Plapper, Peter T1 - A regional remanufacturing network approach BT - modeling and simulation of circular economy processes in the era of industry 4.0 T2 - Digitization of the work environment for sustainable production N2 - Manufacturing companies still have relatively few points of contact with the circular economy. Especially, extending life time of whole products or parts via remanufacturing is an promising approach to reduce waste. However, necessary cost-efficient assessment of the condition of the individual parts is challenging and assessment procedures are technically complex (e.g., scanning and testing procedures). Furthermore, these assessment procedures are usually only available after the disassembly process has been completed. This is where conceptualization, data acquisition and simulation of remanufacturing processes can help. One major constraining aspect of remanufacturing is reducing logistic efforts, since these also have negative external effects on the environment. Thus regionalization is an additional but in the end consequential challenge for remanufacturing. This article aims to fill a gap by providing an regional remanufacturing approach, in particular the design of local remanufacturing chains. Thereby, further focus lies on modeling and simulating alternative courses of action, including feasibility study and eco-nomic assessment. KW - regional network KW - remanufacturing KW - scenario modeling Y1 - 2022 SN - 978-3-95545-407-4 U6 - https://doi.org/10.30844/WGAB_2022_8 SP - 145 EP - 170 PB - GITO Verlag CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert A1 - Teichmann, Malte T1 - ERP-Auswahl für ein Professional Services Unternehmen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die Branche der Dienstleistungsunternehmen (Professional Services) hat einige Anforderungen, die sie von den „klassischen“ ERP-Branchen Industrie und Handel unterscheidet. Dieser Beitrag beschreibt einige der aktuellen Herausforderungen dieses immer wichtiger werdenden Wirtschaftszweigs und geht dann am Beispiel eines mittelständischen Ingenieurdienstleisters auf typische Anforderungen dieser Branche, infrage kommende Systeme und das Vorgehen zur Auswahl ein. KW - ERP-Systeme KW - ERP-Auswahl KW - Auswahlvorgehen KW - Professional Services Unternehmen Y1 - 2020 U6 - https://doi.org/10.30844/ERP_20-2_31-35 SN - 1860-6725 VL - 16 IS - 2 SP - 31 EP - 35 PB - Gito mbh Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - CHAP A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Modeling the handling of knowledge for Industry 4.0 T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Industry 4.0, i.e. the connection of cyber-physical systems via the Internet in production and logistics, leads to considerable changes in the socio-technical system of the factory. The effects range from a considerable need for further training, which is exacerbated by the current shortage of skilled workers, to an opening of the previously inaccessible boundaries of the factory to third-party access, an increasing merging of office IT and manufacturing IT, and a new understanding of what machines can do with their data. This results in new requirements for the modeling, analysis and design of information processing and performance mapping business processes. In the past, procedures were developed under the name of “process-oriented knowledge management” with which the exchange and use of knowledge in business processes could be represented, analyzed and improved. However, these approaches were limited to the office environment. A method that makes it possible to document, analyze and jointly optimize the new possibilities of knowledge processing by using artificial intelligence and machine learning in production and logistics in the same way and in a manner compatible with the approach in the office environment does not exist so far. The extension of the modeling language KMDL, which is described in this paper, will contribute to close this research gap. This paper describes first approaches for an analysis and design method for a knowledge management integrating man and machine in the age of Industry 4.0. KW - 4th industrial revolution KW - knowledge management KW - business process management Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_12 VL - 422 SP - 207 EP - 223 PB - Springer International Publishing CY - Cham ER - TY - GEN A1 - Gronau, Norbert A1 - Schmid, Simone T1 - Martüberblick : Konfiguratoren in ERP-/PPS-Systemen T1 - Market research : configurators in ERP-/PPS-Systems N2 - Die Orientierung am Kunden und dessen individuellen Wünschen ist heutzutage von großer Bedeutung. Mit Hilfe eines Produktkonfigurationssystems ist es möglich, Produkte nach bestimmten Regeln aus bestimmten Bauteilen virtuell zu entwickeln [1] und somit die gewünschten Leistungsmerkmale der Kunden auf ihre Durchführbarkeit hin zu überprüfen. In der vorliegenden Marktuntersuchung wurden die Leistungsfähigkeit von Konfiguratoren sowohl in ERP-/PPS-Systemen als auch als Stand-alone-Lösung untersucht und darauf überprüft, inwiefern sie zur Bewältigung komplexer und variantenreicher Produktgestaltungsaufgaben geeignet sind. N2 - Market research : configurators in ERP-/PPS-Systems: Today customer orientation is of great importance. With the help of a product-configuration-system it is possible to develop products virtually under specific rules and therefore to prove the customer capability characteristics for their practicability. In the present market research the capability of configurators in ERP-/PPS-systems as well as in stand-alone-solutions were checked and it was tested to what extend they are suitable to cope with complex product implementation. ------- © GITO mbH Berlin KW - Marktanalyse KW - Marktübersicht KW - Konfigurator KW - Enterprise-Resource-Planning KW - PPS KW - Marktuntersuchung KW - Produktkonfiguratoren KW - Variantenmanagement KW - ERP-/PPS-Systeme KW - market research KW - product configurators KW - variant management KW - ERP-/PPS-systems Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6826 ER - TY - GEN A1 - Gronau, Norbert A1 - Wildemann, Horst A1 - Zäh, Michael F. T1 - Entwicklung und Betrieb wandlungsfähiger Auftragsabwicklungssysteme T1 - Development and application of adaptive enterprise resource planning systems N2 - Mittelständische Industrieunternehmen setzen für ihre betrieblichen Abläufe Planungs- und Ausführungssysteme ein. Aufgrund der Turbulenzen auf Absatz- und Beschaffungsmärkten kann die Wirtschaftlichkeit und Wettbewerbsfähigkeit dieser Unternehmen nur durch permanente Anpassungen der Organisationsstrukturen und -abläufe erfolgen. In der Praxis zeigt sich eine unzureichende technologische Anpassungsfähigkeit der heute eingesetzten Standardsoftwaresysteme. Diese lassen zwar während der Einführungsphase vielfältige Konfigurationsmöglichkeiten zu, Veränderungen im laufenden Betrieb sind aber meist nur mit großem Aufwand möglich. Hier sind die Softwarehersteller in Zukunft zunehmend gefordert, wandlungsfähige Auftragsabwicklungssysteme zu entwickeln. Über die Entwicklungsphase (Build-Time) hinaus muss auch parallel zur Betriebsphase (Run-Time) der technische Fortschritt aufgrund von geänderten Anforderungen durch entsprechende Softwarereleases synchronisiert werden. N2 - Development and application of adaptive enterprise resource planning systems: Medium-sized industrial enterprises apply resource planning systems for their business processes. Changing markets require permanent adaptation of these enterprises’ organisational structures and processes to ensure their efficiency and their competitiveness. However, currently applied standard software systems have proven to be insufficiently adaptable. They allow multiple configuration options during implementation and setup, but it is hardly possible to perform configuration changes during the application phase. Therefore software developers will have to focus on adaptable enterprise resource planning systems in future. Beyond the development phase (build time) technological progress caused by changing requirements also has to be synchronised simultaneously by current software releases during the application phase (run time). -------- © GITO mbH Berlin KW - Auftragsabwicklung KW - Industrieunternehmen KW - Wandlungsfähigkeit KW - Auftragsabwicklungssysteme KW - Regelkreismechanismus KW - adaptability KW - enterprise resource planning systems KW - control loop mechanism Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6791 ER - TY - GEN A1 - Gronau, Norbert T1 - Marktüberblick T1 - Applications and systems for knowledge management BT - Anwendungen und Systeme für das Wissensmanagement BT - a market survey N2 - Diese Marktstudie vermittelt einen Überblick über Software, die zur Unterstützung von Wissensmanagement eingesetzt werden kann und berücksichtigt dabei die Spannweite von spezialisierten Suchmaschinen bis zu umfassenden integrierten Wissensmanagementsystemen. Die untersuchte Software bietet sowohl Unterstützung bei Community-orientierten Wissensmanagementansätzen als auch bei Information Retrieval. Die Einsatzmöglichkeiten sind genauso unterschiedlich wie die heterogenen Anforderungen von Unternehmen und Organisationen, die diese an Wissensmanagement stellen. Eine direkte Vergleichbarkeit aller untersuchten Softwareprodukte ist daher nicht sinnvoll. N2 - Applications and systems for knowledge management : a market survey: This market survey gives an overview on software for the support of knowledge management. The survey overlooks the span from specialized search engines to integrated knowledge management systems with a broad range of functions. The investigated software supports community-oriented approaches as well as information retrieval. Usage possibilities are as different as the heterogenous requirements of enterprises and organizations for knowledge management. Therefore a direct comparison between the investigated tools is not useful. ----- © GITO mbH Berlin KW - Wissensmanagement KW - Portal KW - Suchmaschine KW - Diskussion KW - Marktübersicht KW - Community KW - knowledge management KW - community KW - portal KW - search engine KW - discussion KW - market survey Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6814 ER - TY - JOUR A1 - Rojahn, Marcel A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Towards a standardization in scheduling models BT - assessing the variety of homonyms JF - International journal of industrial and systems engineering N2 - Terminology is a critical instrument for each researcher. Different terminologies for the same research object may arise in different research communities. By this inconsistency, many synergistic effects get lost. Theories and models will be more understandable and reusable if a common terminology is applied. This paper examines the terminological (in)consistence for the research field of job-shop scheduling by a literature review. There is an enormous variety in the choice of terms and mathematical notation for the same concept. The comparability, reusability and combinability of scheduling methods is unnecessarily hampered by the arbitrary use of homonyms and synonyms. The acceptance in the community of used variables and notation forms is shown by means of a compliance quotient. This is proven by the evaluation of 240 scientific publications on planning methods. KW - job-shop scheduling KW - JSP KW - terminology KW - notation KW - standardization Y1 - 2023 UR - https://publications.waset.org/10013137/pdf SN - 1748-5037 SN - 1748-5045 VL - 17 IS - 6 SP - 401 EP - 408 PB - Inderscience Enterprises CY - Genève ER - TY - JOUR A1 - Lewandowski, Stefanie A1 - Ullrich, André A1 - Gronau, Norbert T1 - Normen zur Berechnung des CO₂-Fußabdrucks T1 - Standards for calculating a carbon footprint BT - ein Vergleich von PAS 2050, GHG Protocol und ISO 14067 JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - CO₂-Fußabdrücke sind ein aktuell viel diskutiertes Thema mit weitreichenden Implikationen für Individuen als auch Unternehmen. Firmen können einen proaktiven Beitrag zur Transparenz leisten, indem der unternehmens- oder produktbezogene CO₂-Fußabdruck ausgewiesen wird. Ist der Entschluss gefasst einen CO₂-Fußabdruck auszuweisen und die entstehenden Treibhausgase zu erfassen, existiert eine Vielzahl unterschiedlicher Normen und Zertifikate, wie die publicly available specification 2050, das Greenhouse Gas Protokoll oder die ISO 14067. Das Ziel dieses Beitrags ist es, diese drei Normen zur Berechnung des produktbezogenen CO₂-Fußabdrucks zu vergleichen, um Gemeinsamkeiten und Unterschiede sowie Vor- und Nachteile in der Anwendung aufzuzeigen. Die Übersicht soll Unternehmen bei der Entscheidungsfindung hinsichtlich der Eignung eines CO₂-Fußabdrucks für ihr Unternehmen unterstützen. N2 - Carbon footprints are a widely discussed topic impacting the individuals as well as companies. A company can be transparent in their actions, by publishing a carbon footprint. These footprints can be calculated for a single product or the whole company. However, there is a variety of different carbon footprint standards. The internationally most recognized ones are the publicly available specification 2050, Greenhouse Gas protocol (2011) and ISO 14067. This paper compares the standards and gives a recommendation for the application of product carbon footprints. KW - environmental footprint KW - product carbon footprint KW - ökologischer Fußabdruck KW - CO₂-Fußabdruck KW - PAS 2050 KW - GHG Protocol KW - ISO 14067 Y1 - 2021 U6 - https://doi.org/10.30844/I40M_21-4_S17-20 SN - 2364-9208 VL - 37 IS - 4 SP - 17 EP - 20 PB - GITO mbH Verlag CY - München ER - TY - CHAP A1 - Grum, Marcus A1 - Kotarski, David A1 - Ambros, Maximilian A1 - Biru, Tibebu A1 - Krallmann, Hermann A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Managing knowledge of intelligent systems BT - the design of a chatbot using domain-specific knowledge T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Since more and more business tasks are enabled by Artificial Intelligence (AI)-based techniques, the number of knowledge-intensive tasks increase as trivial tasks can be automated and non-trivial tasks demand human-machine interactions. With this, challenges regarding the management of knowledge workers and machines rise [9]. Furthermore, knowledge workers experience time pressure, which can lead to a decrease in output quality. Artificial Intelligence-based systems (AIS) have the potential to assist human workers in knowledge-intensive work. By providing a domain-specific language, contextual and situational awareness as well as their process embedding can be specified, which enables the management of human and AIS to ease knowledge transfer in a way that process time, cost and quality are improved significantly. This contribution outlines a framework to designing these systems and accounts for their implementation. KW - domain-specific language KW - morphologic box KW - explainability Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_5 VL - 422 SP - 78 EP - 96 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Quantification of knowledge transfers BT - the design of an experiment setting for the examination of knowledge transfers T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Faced with the triad of time-cost-quality, the realization of knowledge-intensive tasks at economic conditions is not trivial. Since the number of knowledge-intensive processes is increasing more and more nowadays, the efficient design of knowledge transfers at business processes as well as the target-oriented improvement of them is essential, so that process outcomes satisfy high quality criteria and economic requirements. This particularly challenges knowledge management, aiming for the assignment of ideal manifestations of influence factors on knowledge transfers to a certain task. Faced with first attempts of knowledge transfer-based process improvements [1], this paper continues research about the quantitative examination of knowledge transfers and presents a ready-to-go experiment design that is able to examine quality of knowledge transfers empirically and is suitable to examine knowledge transfers on a quantitative level. Its use is proven by the example of four influence factors, which namely are stickiness, complexity, competence and time pressure. KW - knowledge management KW - knowledge transfer KW - conversion KW - empirical examination KW - experiment Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_13 VL - 422 SP - 224 EP - 242 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Errors in the process of modeling business processes T2 - Business modeling and software design : 12th International Symposium, BMSD 2022, Fribourg, Switzerland, June 27–29, 2022, proceedings N2 - Process models are the basic ingredient for many attempts to improve business processes. The graphical depiction of otherwise not observable behavior in an enterprise is one of the most important techniques in the digital society. They help to enable decision making in the design of processes and workflows. Nevertheless it is not easy to correctly model business processes. Some approaches try to detect errors by an automated analysis of the process model. This contribution focuses on the creation of the first model from scratch. Which errors occur most frequently and how can these be avoided? KW - business process modeling KW - errors in modeling KW - process of modeling Y1 - 2022 SN - 978-3-031-11509-7 SN - 978-3-031-11510-3 SN - 978-3-031-11511-0 U6 - https://doi.org/10.1007/978-3-031-11510-3_13 VL - 453 SP - 221 EP - 229 PB - Springer International Publishing CY - Cham ER - TY - GEN A1 - Gronau, Norbert T1 - Ermittlung der Zukunftsfähigkeit unternehmensweiter Anwendungssysteme T1 - A process model for determination of future suitability of business application systems N2 - Bei Entscheidungen über abzulösende oder neue Anwendungssysteme kann mit Hilfe funktionaler Anforderungen immer nur der gegenwärtige oder vorhersehbare Bedarf ermittelt werden. In einem turbulenten Umfeld sind die Anwendungssysteme jedoch häufig langere Zeit im Einsatz als die Anforderungen gültig sind, mit Hilfe derer sie ausgewählt wurden. An der Universität Potsdam wird im Rahmen des BMBF-Projektes CHANGE eine Vorgehensweise zur Ermittlung der Zukunftsfähigkeit unternehmensweiter Anwendungssysteme entwickelt, deren wesentliche Merkmale in diesem Beitrag beschrieben werden. N2 - A process model for determination of future suitability of business application systems: Before decisions concerning reinvestments or additional usage of business application systems can be made, functional requirements depending on the actual or foreseeable demand are collected. In turbulent circumstances business application systems like ERP systems are longer used than the requirements for their choice are valid. At the university of Potsdam within the german research project CHANGE a process model was developed which is able to determine the future suitability of business application systems investigating possible turbulences on the market and around the company. --------- © GITO mbH Berlin KW - Enterprise-Resource-Planning KW - Anwendungssystem KW - Turbulenz KW - Wandlungsfähigkeit KW - IT-Assessment KW - Informationssystemarchitektur KW - ERP-System KW - adaptability KW - IT assessment KW - information system architecture KW - business application KW - ERP system KW - turbulence Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6843 ER - TY - CHAP A1 - Langemeyer, Ines A1 - Gronau, Norbert A1 - Schmid-Walz, Sabrina A1 - Kotarski, David A1 - Reimann, Daniela A1 - Teichmann, Malte T1 - From employee to expert BT - towards a corona-sensitive approach for data collection T2 - 2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland N2 - In the context of the collaborative project Ageing-appropriate, process-oriented and interactive further training in SME (API-KMU), innovative solutions for the challenges of demographic change and digitalisation are being developed for SMEs. To this end, an approach to age-appropriate training will be designed with the help of AR technology. In times of the corona pandemic, a special research design is necessary for the initial survey of the current state in the companies, which will be systematically elaborated in this paper. The results of the previous methodological considerations illustrate the necessity of a mix of methods to generate a deeper insight into the work processes. Video-based retrospective interviews seem to be a suitable instrument to adequately capture the employees' interpretative perspectives on their work activities. In conclusion, the paper identifies specific challenges, such as creating acceptance among employees, open questions, e.g., how a transfer or generalization of the results can succeed, and hypotheses that will have to be tested in the further course of the research process. KW - cross self-confrontation KW - recording of workplaces KW - corona-sensitive data collection KW - age-appropriate vocational training KW - augmented reality Y1 - 2021 U6 - https://doi.org/10.5281/zenodo.4590196 SP - 226 EP - 231 ER - TY - JOUR A1 - Teichmann, Malte A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - Conception of subject-oriented learning BT - ameso-didactic design framework for learning scenarios for manufacturing JF - SSRN eLibrary / Social Science Research Network N2 - Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements. KW - subject-oriented learning KW - learning scenario for manufacturing KW - didactic framework KW - action problems KW - didactic concept Y1 - 2023 U6 - https://doi.org/10.2139/ssrn.4457995 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - BOOK A1 - Gronau, Norbert T1 - Handbuch der ERP-Auswahl BT - Einfach, schnell und sicher T3 - Handbücher ERP Management Y1 - 2023 SN - 978-3-95545-410-4 PB - Gito CY - Berlin ET - 3. überarbeitete und stark erweiterte ER - TY - JOUR A1 - Gronau, Norbert A1 - Bender, Benedict A1 - Bertheau, Clementine A1 - Lauppe, Hannah T1 - Robotic Process Automation statt neuem ERP-System T1 - Robotic Process Automation instead of new ERP systems BT - das steckt hinter dem Hype BT - what’s behind the hype JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Robotic Process Automation (RPA) steht für die softwareunterstützte Bedienung von Softwarelösungen über deren Benutzeroberfläche. Das primäre Ziel, das mit RPA erreicht werden soll, ist die automatisierte Ausführung von Routineaufgaben, die bisher einen menschlichen Eingriff erforderten. Das Potenzial von RPA, Prozesse langfristig zu verbessern, ist allerdings stark begrenzt. Die Automatisierung von Prozessen und die Überbrückung von Medienbrüchen auf der Front-End-Ebene führt zu einer Vielzahl von Abhängigkeiten und Bedingungen, die in diesem Beitrag zusammengefasst werden. Der Weg zu einer nachhaltigen Unternehmensarchitektur (bestehend aus Prozessen und Systemen) erfordert offene, adaptive Systeme mit moderner Architektur, die sich durch ein hohes Maß an Interoperabilität auf verschiedenen Ebenen auszeichnen. N2 - Robotic Process Automation (RPA) stands for the software-sup-ported operation of software solutions via their user interface. The primary goal to be achieved by RPA is the automated execution of tasks that previously required human intervention. The potential of RPA to improve process improvements in the long term must be considered greatly limited. Automating processes and bridging media gaps at the front-end level results in a multitude of dependencies and conditions which this paper summarizes. The path to a sustainable enterprise architecture (consisting of processes and systems) requires open, adaptive systems with modern architecture, which are characterized by a high level of interoperability at different levels. KW - ERP KW - Robotic Process Automation KW - RPA KW - Prozessintegration KW - Automatisierung KW - process integration KW - automation Y1 - 2021 UR - https://www.wiso-net.de/document/ERP__c8c3f3e4b15758c79ca036e7003be81d0a8b3864 U6 - https://doi.org/10.30844/ERP_21-1_29-32 SN - 1860-6725 VL - 17 IS - 1 SP - 29 EP - 32 PB - GITO mbH Verlag CY - Berlin ER - TY - GEN A1 - Eggert, Sandy A1 - Gronau, Norbert T1 - Marktüberblick T1 - Market research BT - IT-Unterstützung im Customer Relationship Management BT - Customer Relationship Management solutions N2 - Für viele Unternehmen hat sich der Stellenwert der Kundenbeziehung in den letzten Jahren nachhaltig verändert. Da Wettbewerbsfähigkeit häufig über die Beziehung zum Kunden definiert wird, ist den meisten Unternehmen die Bedeutung des Kundenwissens durchaus bewusst. Schon immer war die Beziehung zum Kunden für ein Unternehmen existenzkritisch, jedoch hat sich dazu die Situation auf den eigenen Absatzmärkten stark gewandelt. Durch den steigenden internationalen Wettbewerb kommt es zunehmend zu gesättigten Absatzmärkten und erhöhten Kostendruck. Weiterhin kommt seitens der Kunden ein höheres Erwartungsniveau sowie abnehmende Kundenloyalität erschwerend hinzu. Diese Gründe erfordern eine neuartige Kundenorientierung im Sinne eines umfassenden Kundenbeziehungsmanagement (engl. Customer Relationship Management, CRM). N2 - Market research : Customer Relationship Management solutions: For many companies the importance of costumer relations has changed decisively within the last couple of years. This article illustrates the present significance of costumer relationship management and presents CMR-Systems and their general features as well as specific CMR-functions in the German-speaking market. ------- © GITO mbH Berlin KW - Kundenmanagement KW - Marktübersicht KW - Customer Relationship Management KW - Funktionsumfang KW - Customer Relationship Management KW - Market Research KW - Functions Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6809 ER - TY - GEN A1 - Schmid, Simone A1 - Andresen, Katja A1 - Gronau, Norbert T1 - Optimierung werksübergreifender Geschäftsprozesse am Beispiel der Automobilzuliefererindustrie T1 - Optimisation of cross-plant business processes in the automotive industry BT - Auswertung einer Marktstudie zu ERP-/PPS-Systemen N2 - Die Bedeutung der Zulieferer für die Automobilhersteller wächst stetig, weil die Zulieferer immer stärker in den gesamten Wertschöpfungsprozess des Herstellers eingebunden werden und somit ständig Planung, Qualität und Logistikabläufe optimiert werden müssen. Betriebliche Anwendungen, wie Enterprise Resource Planning- (ERP-) oder Produktionsplanung- und –steuerungs-(PPS-) Systeme werden benötigt, um den störungsfreien und reibungslosen Ablauf der Geschäftsprozesse und damit die ständige Lieferfähigkeit gegenüber dem Automobilhersteller zu garantieren [1]. Anhand eines Marktüberblicks werden in diesem Beitrag innovative Ansätze, Möglichkeiten und Koordinationsmechanismen zur Unterstützung der Produktion in verteilten Standorten von aktuellen ERP-/PPS-Systemen vorgestellt. N2 - Optimisation of cross-plant business processes in the automotive industry: The importance of components suppliers for automotive manufacturer is constantly increasing. This is because they are more and more integrated in the complete value-added process of the manufacturers. Thus the optimisation of planning, quality and logistical workflows is essential. ERP- and PPS-systems are needed to guarantee undisturbed business processes and to assure the ability to supply. The following market research will introduce innovative approaches, opportunities and coordination instruments of ERP-/PPS-systems to support the production of distributed locations. KW - Enterprise-Resource-Planning KW - Marktuntersuchung KW - PPS KW - ERP-/PPS-Systeme KW - werksübergreifende Geschäftsprozesse KW - Automobilzulieferer KW - market research KW - ERP-/PPSsystems KW - cross-plant business processes KW - components suppliers Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6837 ER - TY - BOOK A1 - Gronau, Norbert T1 - Wiederanlauf nach der Krise BT - Anlaufmanagement in der Industrie N2 - Jetzt intelligent aus der Krise heraus starten! Der Anlauf von Neuprodukten und der jetzt notwendige Wiederanlauf nach der Corona-Krise haben einige Gemeinsamkeiten: In beiden Fällen muss vorsichtig vorgegangen werden, es muss eine hohe Wandlungsfähigkeit und Anpassungsfähigkeit aufrechterhalten werden, um schnell auf eine Veränderung der Situation reagieren zu können und es werden geeignete Werkzeuge und Prognoseverfahren benötigt, um sich die Auswirkungen von geplanten Schritten vorher verdeutlichen zu können. Das vorliegende Herausgeberwerk wurde zusammengestellt, um Expertenwissen für die Praxis nutzbar zu machen. Die über 30 Aufsätze in diesem Werk dienen dem Ziel, das Thema „Wiederanlauf nach der Krise“ aus allen wichtigen Blickwinkeln zu beleuchten und alle relevanten Branchen zu berücksichtigen. Nach der Darstellung allgemeiner Prinzipien des Wiederanlaufs werden Methoden und Werkzeuge vorgestellt, bevor dann Spezika einzelner Branchen diskutiert werden. Im Vordergrund steht dabei die international vernetzte Automobilindustrie sowie die globalen Lieferketten. Weitere Branchen wie die Elektronikfertigung und die Herstellung von Konsumgütern werden ebenfalls besprochen. Zielgruppe dieses Werkes sind vor allem diejenigen, die jetzt den Wiederanlauf von Produktionssystemen nach der drastischen Reduzierung durch das neuartige Corona-Virus planen, vorbereiten und umsetzen. Y1 - 2020 SN - 978-3-95545-343-5 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Gronau, Norbert A1 - Teichmann, Malte A1 - Weber, Edzard ED - Shishkov, Boris T1 - Serious game-based haptic modeling BT - an application-oriented approach for sequentially developing new business models from tacit knowledge T2 - Business modeling and software design N2 - The authors propose that while tacit knowledge is a valuable resource for developing new business models, its externalization presents several challenges. One major challenge is that individuals often don’t recognize their tacit knowledge resources, while another is the reluctance to share one’s knowledge with others. Addressing these challenges, the authors present an application-oriented serious game-based haptic modeling approach for externalize tacit knowledge, which can be used to develop the first versions of business models based on tacit knowledge. Both conceptual and practical design fundamentals are presented based on elaborated theoretical approaches, which were developed with the help of a design science approach. The development of the research process is presented step by step, whereby we focused on the high accessibility of the presented research. Practitioners are presented with guidelines for implementing their serious game projects. Scientists benefit from starting points for their research topics of externalization, internalization, and socialization of tacit knowledge, development of business models, and serious games or gamification. The paper concludes with open research desiderata and questions from the presented research process. KW - serious game KW - tacit knowledge KW - business model KW - SECI-model KW - conversion sequences KW - design science Y1 - 2023 SN - 978-3-031-36756-4 U6 - https://doi.org/10.1007/978-3-031-36757-1_3 SP - 32 EP - 55 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Knost, Dennis A1 - Gronau, Norbert T1 - Serious games in learning factories BT - perpetuating knowledge in learning loops by game-based learning JF - Procedia manufacturing N2 - The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated. KW - game-based learning KW - gamification KW - serious game KW - learning factories Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.104 SN - 2351-9789 VL - 45 SP - 259 EP - 264 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Gronau, Norbert ED - Freitag, Michael T1 - Modellieren des Umgangs mit Wissen für Industrie 4.0 T2 - Mensch-Technik-Interaktion in der digitalisierten Arbeitswelt Y1 - 2020 SN - 978-3-95545-353-4 U6 - https://doi.org/10.30844/wgab_2020 SP - 79 EP - 101 PB - GITO mbH Verlag CY - Berlin ER - TY - BOOK A1 - Gronau, Norbert A1 - Lindemann, Marcus T1 - Einführung in das Produktionsmanagement T3 - Skripte zur Wirtschaftsinformatik N2 - Dieses Buch bietet eine Einführung in das Produktionsmanagement in kommentierter Form. Der erste Teil des Buches gibt einen einführenden Überblick über grundlegende Begriffe der Produktionswirtschaft und systematisiert Produktionsfaktoren, Produktionssysteme und Produkte. Im zweiten Teil geht es um strategische Aspekte des Produktionsmanagements, wie Standortwahl und Produktstrategie, sowie um die Festlegung des Produktionsprogramms. Teil 3 behandelt mit der Gestaltung des Produktionssystems und menschlicher Arbeit die Potenzialfaktoren der Produktion. Gegenstand des vierten Teils ist die Versorgung der Produktion mit dem benötigten Material. Hier werden Fragen der Materialbedarfsermittlung, der Beschaffung und der Lagerhaltung beleuchtet. Im fünften Teil werden relevante Konzepte der operativen Produktionsplanung und -steuerung vorgestellt und die besonderen Planungsprobleme in der Einzel-, Auftrags- und Variantenfertigung betrachtet. Im Fokus des sechsten Teils steht die Serien- und Massenfertigung. Y1 - 2014 SN - 978-3-942183-10-9 PB - Gito CY - Berlin ET - durchgesehene Auflage ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Kotarski, David A1 - Gronau, Norbert T1 - Facing the demographic change BT - recommendations for designing learning factories as age-appropriate teaching-learning environments for older blue-collar workers JF - SSRN eLibrary / Social Science Research Network N2 - Digitization and demographic change are enormous challenges for companies. Learning factories as innovative learning places can help prepare older employees for the digital change but must be designed and configured based on their specific learning requirements. To date, however, there are no particular recommendations to ensure effective age-appropriate training of bluecollar workers in learning factories. Therefore, based on a literature review, design characteristics and attributes of learning factories and learning requirements of older employees are presented. Furthermore, didactical recommendations for realizing age-appropriate learning designs in learning factories and a conceptualized scenario are outlined by synthesizing the findings. KW - learning factory KW - vocational training KW - learning environment KW - age-appropriate competence development KW - demographic change Y1 - 2021 U6 - https://doi.org/10.2139/ssrn.3858716 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Gronau, Norbert T1 - Handlungsmuster der Feuerwehr für das Störungsmanagement? JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Einsatzorganisationen, wie z. B. Feuerwehr oder Technisches Hilfs-werk, müssen sehr schnell auf teilweise unbekannte Lagen reagieren und angemessene Hilfeleistung erbringen. Können Handlungsweisen und vorbereitende Maßnahmen dieser Organisationen auf die Störungsbeseitigung in Produktionssystemen übertragen werden? Ein Experiment in einem Cyber-Physischen Produktionssystem geht dieser Frage nach. Es zeigt sich, dass durch die Anwendung geeigneter Handlungsmuster sowohl die Dauer von Störungen als auch die Zeit für die Behebung verkürzt werden können. Y1 - 2020 U6 - https://doi.org/10.3139/104.112227 SN - 2511-0896 SN - 0947-0085 VL - 115 IS - 1-2 SP - 82 EP - 85 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert A1 - Abendroth, Adrian A1 - Fattah-Weil, Jasmin T1 - ERP-Upgrade oder ERP-Neuauswahl? JF - Is-Report : Zeitschrift für betriebswirtschaftliche Informationssysteme N2 - Neben kleineren, meist automatisierten Update-Aktivitäten zur Fehlerbehebung und zur Steigerung der Performance von ERP-Systemen, gibt es größere Updates mit umfangreicheren Aktualisierungen und Erweiterungen der Software – auch „Updateprojekte“ oder „Upgrades“ genannt. Ein ERP-Upgrade beschreibt einen größeren Änderungsprozess, der die Nutzung neuer Technologien ermöglicht und das System mit (neuen) Geschäftsstrategien in Einklang bringt. Upgrades tragen zur Verbesserung der Software bei und sind klar zu unterscheiden von geringfügigen Änderungen innerhalb einer Version eines ERP-Systems. Y1 - 2023 SN - 1437-7942 VL - 27 IS - Sonderausgabe Mai SP - 10 EP - 14 PB - is report Online & Guides (Rauch & Weckerlein GbR) CY - München ER - TY - JOUR A1 - Ullrich, André A1 - Gronau, Norbert T1 - Bestimmung nachhaltiger Anwendungssystemarchitekturen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die teilweise sehr kurzfristig notwendige Reaktion auf Veränderungen erfordert von Unternehmen ein hohes Maß an Flexibilität und Reaktionsgeschwindigkeit. Anwendungssystemarchitekturen, die im Wesentlichen aus alten und selbst entwickelten Systemen bestehen, erfüllen häufig diese Anforderungen nicht. Investitionsmittel für neue Software sind jedoch begrenzt, daher müssen Prioritäten in der Ablösung von Altsystemen gesetzt werden. Eine effiziente Analysemethode zur Planung der Erneuerung der Anwendungssystemlandschaft stellt die Wandlungsfähigkeitsanalyse dar. Dieser Beitrag beschreibt Vorgehen und Ergebnisse am Beispiel eines international tätigen Automobilzulieferers. N2 - The sometimes necessary reaction to changes requires a high degree of adaptability and speed of reaction from companies. Application system architectures, which essentially consist of old and self-developed systems, often do not meet these requirements. However, investment funds for new software are limited, so priorities must be set in the replacement of old systems. An efficient analysis method for planning the renewal of the application system landscape is the adaptability analysis. This article describes the procedure and results using the example of an internationally active automotive supplier. KW - Anpassungsfähigkeit KW - Anwendungssystemarchitekturen KW - Bewertung KW - adaptability KW - application system architectures KW - assessment Y1 - 2020 UR - https://www.wiso-net.de/document/ERP__1ba9f709bedd19d76acba5daebbc08c9befe5b9f U6 - https://doi.org/10.30844/ERP_20-1_54-57 SN - 1860-6725 VL - 16 IS - 1 SP - 54 EP - 57 PB - GITO mbH CY - Berlin ER - TY - CHAP A1 - Grum, Marcus A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Adaptable knowledge-driven information systems improving knowledge transfers BT - design of context-sensitive, AR-enabled furniture assemblies T2 - Business modeling and software design : 10th International Symposium, BMSD 2020, Berlin, Germany, July 6-8, 2020, Proceedings N2 - A growing number of business processes can be characterized as knowledge-intensive. The ability to speed up the transfer of knowledge between any kind of knowledge carriers in business processes with AR techniques can lead to a huge competitive advantage, for instance in manufacturing. This includes the transfer of person-bound knowledge as well as externalized knowledge of physical and virtual objects. The contribution builds on a time-dependent knowledge transfer model and conceptualizes an adaptable, AR-based application. Having the intention to accelerate the speed of knowledge transfers between a manufacturer and an information system, empirical results of an experimentation show the validity of this approach. For the first time, it will be possible to discover how to improve the transfer among knowledge carriers of an organization with knowledge-driven information systems (KDIS). Within an experiment setting, the paper shows how to improve the quantitative effects regarding the quality and amount of time needed for an example manufacturing process realization by an adaptable KDIS. KW - augmented reality KW - knowledge transfers KW - empirical studies KW - context-aware computing KW - adaptable software systems KW - business process improvement Y1 - 2020 SN - 978-3-030-52305-3 SN - 978-3-030-52306-0 U6 - https://doi.org/10.1007/978-3-030-52306-0_13 VL - 391 SP - 202 EP - 220 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Rojahn, Marcel A1 - Ambros, Maximilian A1 - Biru, Tibebu A1 - Krallmann, Hermann A1 - Gronau, Norbert A1 - Grum, Marcus ED - Rutkowski, Leszek ED - Scherer, Rafał ED - Korytkowski, Marcin ED - Pedrycz, Witold ED - Tadeusiewicz, Ryszard ED - Zurada, Jacek M. T1 - Adequate basis for the data-driven and machine-learning-based identification T2 - Artificial intelligence and soft computing N2 - Process mining (PM) has established itself in recent years as a main method for visualizing and analyzing processes. However, the identification of knowledge has not been addressed adequately because PM aims solely at data-driven discovering, monitoring, and improving real-world processes from event logs available in various information systems. The following paper, therefore, outlines a novel systematic analysis view on tools for data-driven and machine learning (ML)-based identification of knowledge-intensive target processes. To support the effectiveness of the identification process, the main contributions of this study are (1) to design a procedure for a systematic review and analysis for the selection of relevant dimensions, (2) to identify different categories of dimensions as evaluation metrics to select source systems, algorithms, and tools for PM and ML as well as include them in a multi-dimensional grid box model, (3) to select and assess the most relevant dimensions of the model, (4) to identify and assess source systems, algorithms, and tools in order to find evidence for the selected dimensions, and (5) to assess the relevance and applicability of the conceptualization and design procedure for tool selection in data-driven and ML-based process mining research. KW - data mining KW - knowledge engineering KW - various applications Y1 - 2023 SN - 978-3-031-42504-2 SN - 978-3-031-42505-9 U6 - https://doi.org/10.1007/978-3-031-42505-9_48 SP - 570 EP - 588 PB - Springer CY - Cham ER - TY - CHAP A1 - Teichmann, Malte A1 - Lass, Sander A1 - Ullrich, André A1 - Gronau, Norbert ED - Weber, Kristin ED - Reinheimer, Stefan T1 - Modellfabriken als Enabler flexibler Lehr- und Lernsituationen für die Kompetenzentwicklung im Fabrikkontext BT - die Lernfabrik des Zentrums Industrie 4.0 Potsdam T2 - Faktor Mensch N2 - Dieses Kapitel diskutiert die Notwendigkeit einer stärkeren Praxisorientierung für die Schaffung konkreter Lehr- und Lernräume in Unternehmen und zeigt die Vorteile einer Lernfabrik vor dem Hintergrund der stattfindenden Digitalisierung als Mittel zur Kompetenzentwicklung auf. Die technologiebedingt erweiterten Weiterbildungsziele erfordern die Nutzung geeigneter Konzepte und Lösungen. Dahingehend erfolgt die zielorientierte Konkretisierung der Kreation geeigneter Lehr- und Lernsituationen. Die Darstellung der Nutzbarmachung einer Modellfabrik als Lernfabrik der betrieblichen Weiterbildungspraxis zeigt nicht nur eine Lösung für die intendierte Bereitstellung flexibler Lehr- und Lernsituationen, sondern liefert ebenso Handlungsempfehlungen und Best-Practices für die erfolgreiche Kompetenzentwicklung. Insbesondere Praktiker profitieren von der Darstellung der Lernfabrik: aus dieser können sowohl betriebliche Weiterbildner als auch Geschäftsverantwortliche Implikationen für die didaktische Transformation betrieblicher Arbeitsorte in betriebliche Lern-Orte ableiten. Die detaillierte Darstellung einer Tagesschulung zum Thema Auswirkungen von Industrie 4.0 auf die Arbeit der Mitarbeiter sowie Illustration eines Lernszenarios geben reale Einblicke, wie betriebliche Weiterbildung abseits von Lehr-Lern-Kurzschluss-orientierter Didaktik gelingt. KW - betriebliche Weiterbildung KW - Digitalisierung KW - Modellfabrik KW - Lehr-Lernsituationen KW - Industrie 4.0 KW - Zentrum Industrie 4.0 Y1 - 2022 SN - 978-3-658-34523-5 SN - 978-3-658-34524-2 U6 - https://doi.org/10.1007/978-3-658-34524-2_10 N1 - vollständig überarbeiteter und erweiterter Beitrag basierend auf dem Artikel „Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung“ von Malte Teichmann, André Ullrich, Julian Wenz, Norbert Gronau, HMD Heft 333, Stefan Reinheimer, Kristin Weber (Hrsg.): Faktor Mensch, Juni 2020, S. 512–527. SP - 173 EP - 196 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Bender, Benedict A1 - Bertheau, Clementine A1 - Körppen, Tim A1 - Lauppe, Hannah A1 - Gronau, Norbert T1 - A proposal for future data organization in enterprise systems BT - an analysis of established database approaches JF - Information systems and e-business management N2 - The digital transformation sets new requirements to all classes of enterprise systems in companies. ERP systems in particular, which represent the dominant class of enterprise systems, are struggling to meet the new requirements at all levels of the architecture. Therefore, there is an urgent need to reconsider the overall architecture of the systems and address the root of the related issues. Given that many restrictions ERP pose on their adaptability are related to the standardization of data, the database layer of ERP systems is addressed. Since database serve as the foundation for data storage and retrieval, they limit the flexibility of enterprise systems and the chance to adapt to new requirements accordingly. So far, relational databases are widely used. Using a systematic literature approach, recent requirements for ERP systems were identified. Prominent database approaches were assessed against the 23 requirements identified. The results reveal the strengths and weaknesses of recent database approaches. To this end, the results highlight the demand to combine multiple database approaches to fulfill recent business requirements. From a conceptual point of view, this paper supports the idea of federated databases which are interoperable to fulfill future requirements and support business operation. This research forms the basis for renewal of the current generation of ERP systems and proposes to ERP vendors to use different database concepts in the future. KW - database KW - enterprise system KW - ERP system KW - requirements KW - problems KW - future Y1 - 2022 U6 - https://doi.org/10.1007/s10257-022-00555-6 SN - 1617-9846 SN - 1617-9854 VL - 20 SP - 441 EP - 494 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert ED - Reis, Arsénio ED - Barroso, João ED - Lopes, J. Bernardino ED - Mikropoulos, Tassos ED - Fan, Chih-Wen T1 - Yes, we can (?) BT - a critical review of the COVID-19 semester T2 - Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings N2 - The COVID-19 crisis has caused an extreme situation for higher education institutions around the world, where exclusively virtual teaching and learning has become obligatory rather than an additional supporting feature. This has created opportunities to explore the potential and limitations of virtual learning formats. This paper presents four theses on virtual classroom teaching and learning that are discussed critically. We use existing theoretical insights extended by empirical evidence from a survey of more than 850 students on acceptance, expectations, and attitudes regarding the positive and negative aspects of virtual teaching. The survey responses were gathered from students at different universities during the first completely digital semester (Spring-Summer 2020) in Germany. We discuss similarities and differences between the subjects being studied and highlight the advantages and disadvantages of virtual teaching and learning. Against the background of existing theory and the gathered data, we emphasize the importance of social interaction, the combination of different learning formats, and thus context-sensitive hybrid learning as the learning form of the future. KW - COVID-19 KW - higher education KW - virtual learning KW - digital learning KW - subject differences Y1 - 2021 SN - 978-3-030-73987-4 SN - 978-3-030-73988-1 U6 - https://doi.org/10.1007/978-3-030-73988-1_17 SP - 225 EP - 235 PB - Springer CY - Cham ER - TY - JOUR A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ullrich, André T1 - Konsens-Algorithmen von Blockchain BT - eine Betrachtung der Nachhaltigkeit der Konsensfindung JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Neben dem enormen Kursanstieg des Bitcoins in den Jahren 2017/2018, stieg im gleichen Maß auch die benötigte Rechenleistung und der damit verbundene Elektrizitätsbedarf, um Blöcke innerhalb der Bitcoin-Blockchain zu verifizieren. Aus diesem Problem ableitend beschäftigt sich dieser Beitrag mit der Fragestellung, welchen Beitrag unterschiedliche Konsens-Algorithmen innerhalb einer Blockchain zur Nachhaltigkeit liefern. Im Ergebnis liegt ein Überblick über die meist genutzten Konsens-Algorithmen und deren Beitrag zur Nachhaltigkeit vor. KW - Konsens-Algorithmen KW - Blockchain KW - proof of work KW - proof of stake KW - delegated proof of stake KW - Nachhaltigkeit Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-1_S29-32 SN - 2364-9208 VL - 36 IS - 1 SP - 29 EP - 32 PB - Gito CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert T1 - Umstieg auf S/4HANA BT - oder doch auf ein anderes ERP-System? JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Sehr viele langjährige R/3-Nutzer stehen derzeit vor der Frage, wie sie sich hinsichtlich des Upgrades auf S/4HANA entscheiden sollen. Die Wartung für R/3 endet absehbar in den nächsten Jahren, und mit S/4 kommen neue Möglichkeiten, aber auch neue Herausforderungen. Dieser Beitrag beschreibt die Entscheidungen, die bei der Prüfung eines Umstiegs auf S/4HANA getroffen werden müssen und zeigt diese am Beispiel eines Multi-Channel-Handelsunternehmens. Y1 - 2023 UR - https://www.wiso-net.de/document/BLIS__8f327521f0635ca4fd8bdec54b86580b5a5fe540 SN - 1860-6725 VL - 19 IS - 1 SP - 32 EP - 37 PB - GITO CY - Berlin ER - TY - JOUR A1 - Kluge, Annette A1 - Gronau, Norbert T1 - Intentional forgetting in organizations BT - the Importance of Eliminating Retrieval Cues for Implementing New Routines JF - Frontiers in psychology N2 - To cope with the already large, and ever increasing, amount of information stored in organizational memory, "forgetting," as an important human memory process, might be transferred to the organizational context. Especially in intentionally planned change processes (e.g., change management), forgetting is an important precondition to impede the recall of obsolete routines and adapt to new strategic objectives accompanied by new organizational routines. We first comprehensively review the literature on the need for organizational forgetting and particularly on accidental vs. intentional forgetting. We discuss the current state of the art of theory and empirical evidence on forgetting from cognitive psychology in order to infer mechanisms applicable to the organizational context. In this respect, we emphasize retrieval theories and the relevance of retrieval cues important for forgetting. Subsequently, we transfer the empirical evidence that the elimination of retrieval cues leads to faster forgetting to the forgetting of organizational routines, as routines are part of organizational memory. We then propose a classification of cues (context, sensory, business process-related cues) that are relevant in the forgetting of routines, and discuss a meta-cue called the "situational strength" cue, which is relevant if cues of an old and a new routine are present simultaneously. Based on the classification as business process-related cues (information, team, task, object cues), we propose mechanisms to accelerate forgetting by eliminating specific cues based on the empirical and theoretical state of the art. We conclude that in intentional organizational change processes, the elimination of cues to accelerate forgetting should be used in change management practices. KW - change management KW - multi-actor routines KW - business processes KW - knowledge management KW - organizational memory KW - situational strength Y1 - 2018 U6 - https://doi.org/10.3389/fpsyg.2018.00051 SN - 1664-1078 VL - 9 PB - Frontiers Research Foundation CY - Lausanne ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Mobile IIoT-Technologien in hybriden Lernfabriken T1 - Using Mobile IIoT-Technologies in Hybrid Learning Factories BT - Szenariobasierte Entwicklung von Handlungskompetenz im Anwendungszentrum Industrie 4.0 BT - a Scenario-Based Development of Acting Capability in the Application Center Industry 4.0 JF - Industrie 4.0 Management N2 - Der Wandel zur automatisierten Produktion, die fortschreitende Digitalisierung der Wertschöpfungsprozesse sowie die stetige Implementierung von mobilen Industrial Internet of Things-Technologien (IIoT) in diese zur Unterstützung der Mitarbeiter stellen betriebliche Weiterbildung vor Herausforderungen. Komple-xere Anforderungen und veränderte Tätigkeitsprofile erfordern Handlungskom-petenzen bei Mitarbeitern im Sinne der Fähigkeit, in unbekannten Situationen auf Basis eigenen Könnens handlungsfähig zu bleiben. Jene sowie dafür notwendiges umfassendes Verständnis gegenüber digitalisierten Produktions-prozessen kann jedoch durch konventionelle Lehrmethoden nicht realisiert werden, da diese der erhöhten Anforderungskomplexität und den komplexen Rückkopplungen im Rahmen der Steuer- und Regelkreise nicht gerecht werden können. Diese Aspekte aufgreifend wird im Folgenden ein szenariobasierter Wei-terbildungsansatz für eine Lernfabrik vorgestellt, der insbesondere die Potenziale mobiler IIoT-Technologien zur Ausgestaltung dieser in den Blick nimmt. N2 - Recently, implementation procedures of automatic production, digitalization and Industrial Internet of Things technologies (IIoT) play an increasing role in industrial manufacturing processes. Subsequently, the competence requirements for employees change. These changes cannot be anticipated by traditional learning approaches. The following contribution faces this challenge and will show a new integrated learning factory approach which combines the application of new technologies with a flexible production environment. Thus establishing production surroundings that are familiar to the learner. The contribution demonstrates this approach using a quality control process in the context of logistics. KW - Mobile IIoT-Technologie KW - Lernszenario KW - Anwendungszentrum Industrie 4.0 KW - Lernfabrik KW - mobile IIoT-technologies KW - learning scenario KW - application center Industrie 4.0 KW - digital learning factory Y1 - 2018 U6 - https://doi.org/10.30844/I40M_18-3_S21-24 SN - 2364-9208 VL - 34 IS - 3 SP - 21 EP - 24 PB - GITO CY - Berlin ER - TY - JOUR A1 - Dragičević, Nikolina A1 - Ullrich, André A1 - Tsui, Eric A1 - Gronau, Norbert T1 - A conceptual model of knowledge dynamics in the industry 4.0 smart grid scenario JF - Knowledge management research & practice : KMRP N2 - Technological advancements are giving rise to the fourth industrial revolution - Industry 4.0 -characterized by the mass employment of smart objects in highly reconfigurable and thoroughly connected industrialproduct-service systems. The purpose of this paper is to propose a theory-based knowledgedynamics model in the smart grid scenario that would provide a holistic view on the knowledge-based interactions among smart objects, humans, and other actors as an underlyingmechanism of value co-creation in Industry 4.0. A multi-loop and three-layer - physical, virtual, and interface - model of knowledge dynamics is developedby building on the concept of ba - an enabling space for interactions and theemergence of knowledge. The model depicts how big data analytics are just one component inunlocking the value of big data, whereas the tacit engagement of humans-in-the-loop - theirsense-making and decision-making - is needed for insights to be evoked fromanalytics reports and customer needs to be met. KW - Industry 4.0 KW - tacit knowledge KW - humans-in-the-loop KW - big data analytics KW - internet of things and services KW - smart grid Y1 - 2020 U6 - https://doi.org/10.1080/14778238.2019.1633893 SN - 1477-8238 SN - 1477-8246 VL - 18 IS - 2 SP - 199 EP - 213 PB - Taylor & Francis CY - London [u.a.] ER - TY - JOUR A1 - Gronau, Norbert A1 - Ulrich, Andre A1 - Bender, Benedict T1 - Hybride Lernfabrik im Anwendungszentrum Industrie 4.0 JF - Industrial Internet of Things in der Arbeits- und Betriebsorganisation Y1 - 2017 SN - 978-3-95545-225-4 SP - 1 EP - 23 PB - Gito CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert T1 - Trends in der ERP Branche JF - Die Rolle von ERP-Systemen im Zeitalter der Digitalisierung Y1 - 2017 SN - 978-3-95545-197-4 SP - 85 EP - 109 PB - Gito CY - Berlin ER - TY - JOUR A1 - Gronau, Norbert T1 - Industrie 4.0 JF - Von Industrial Internet of Things zu Industrie 4.0. Band 2 Y1 - 2018 SN - 978-3-95545-261-2 SP - 191 EP - 228 PB - Gito CY - Berlin ER - TY - GEN A1 - Kluge, Annette A1 - Gronau, Norbert T1 - Intentional forgetting in organizations BT - the importance of eliminating retrieval cues for implementing new routines T2 - Postprints der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - To cope with the already large, and ever increasing, amount of information stored in organizational memory, "forgetting," as an important human memory process, might be transferred to the organizational context. Especially in intentionally planned change processes (e.g., change management), forgetting is an important precondition to impede the recall of obsolete routines and adapt to new strategic objectives accompanied by new organizational routines. We first comprehensively review the literature on the need for organizational forgetting and particularly on accidental vs. intentional forgetting. We discuss the current state of the art of theory and empirical evidence on forgetting from cognitive psychology in order to infer mechanisms applicable to the organizational context. In this respect, we emphasize retrieval theories and the relevance of retrieval cues important for forgetting. Subsequently, we transfer the empirical evidence that the elimination of retrieval cues leads to faster forgetting to the forgetting of organizational routines, as routines are part of organizational memory. We then propose a classification of cues (context, sensory, business process-related cues) that are relevant in the forgetting of routines, and discuss a meta-cue called the "situational strength" cue, which is relevant if cues of an old and a new routine are present simultaneously. Based on the classification as business process-related cues (information, team, task, object cues), we propose mechanisms to accelerate forgetting by eliminating specific cues based on the empirical and theoretical state of the art. We conclude that in intentional organizational change processes, the elimination of cues to accelerate forgetting should be used in change management practices. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 127 KW - change management KW - multi-actor routines KW - business processes KW - knowledge management KW - organizational memory KW - situational strength Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446022 SN - 1867-5808 IS - 127 ER - TY - GEN A1 - Weber, Edzard A1 - Tiefenbacher, Anselm A1 - Gronau, Norbert T1 - Need for standardization and systematization of test data for job-shop scheduling T2 - Postprints der Universität Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe N2 - The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research. Keywords T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 134 KW - job shop scheduling KW - JSP KW - social network analysis KW - method comparision Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472229 SN - 1867-5808 IS - 134 ER - TY - BOOK A1 - Gronau, Norbert T1 - Geschäftsprozessmanagement in Wirtschaft und Verwaltung BT - Analyse, Modellierung und Konzeption N2 - Dieses Werk zu Geschäftsprozessmanagement in Wirtschaft und Verwaltung gibt gleichzeitig einen Überblick über den aktuellen Stand der Forschung zu diesem Thema und führt Interessierte wie Studierende oder Praktiker in das Thema und seine Facetten ein. Aktuelle Entwicklungen werden aufgegriffen und vor allem die drei wesentlichen GPM-Blickwinkel Technik, Organisation und Mensch gleichberechtigt behandelt. Aus Sicht der Forschung werden innovative Methoden zur Modellierung und Analyse von Geschäftsprozessen beschrieben. Aus Sicht der Lehre dient das Buch gleichermaßen als Einstiegslektüre und liefert Ansatzpunkte für die vertiefte Befassung mit einzelnen Aspekten des Geschäftsprozessmanagements. Für die Praxis beschreibt dieses Werk die dort bestehenden konzeptionellen und methodischen Hindernisse des Prozessmanagements und zeigt Wege zur Überwindung dieser Hindernisse. Die vorliegende Auflage wurde gründlich überarbeitet und stark erweitert, u. a. mit Kapiteln zur Simulation und Automatisierung von Geschäftsprozessen. Y1 - 2017 SN - 978-3-95545-192-9 PB - Gito CY - Berlin ET - 2. überarb. und erweiterte Aufl. ER - TY - BOOK A1 - Gronau, Norbert T1 - Knowledge Modeling and Description Language 3.0 BT - eine Einführung Y1 - 2020 SN - 978-3-95545-330-5 SN - 978-3-95545-357-2 PB - GITO CY - Berlin ER - TY - GEN A1 - Grum, Marcus A1 - Gronau, Norbert T1 - Process modeling within augmented reality BT - the bidirectional interplay of two worlds T2 - Business Modeling and Software Design, BMSD 2018 N2 - The collaboration during the modeling process is uncomfortable and characterized by various limitations. Faced with the successful transfer of first process modeling languages to the augmented world, non-transparent processes can be visualized in a more comprehensive way. With the aim to rise comfortability, speed, accuracy and manifoldness of real world process augmentations, a framework for the bidirectional interplay of the common process modeling world and the augmented world has been designed as morphologic box. Its demonstration proves the working of drawn AR integrations. Identified dimensions were derived from (1) a designed knowledge construction axiom, (2) a designed meta-model, (3) designed use cases and (4) designed directional interplay modes. Through a workshop-based survey, the so far best AR modeling configuration is identified, which can serve for benchmarks and implementations. KW - Augmented reality KW - Process modeling KW - Simulation process building KW - Generalized knowledge constructin axiom KW - Meta-model KW - Use cases Morphologic box KW - Industry 4.0 KW - CPS KW - CPPS KW - Internet of things Y1 - 2018 SN - 978-3-319-94214-8 SN - 978-3-319-94213-1 U6 - https://doi.org/10.1007/978-3-319-94214-8_7 SN - 1865-1348 VL - 319 SP - 99 EP - 115 PB - Springer CY - Berlin ER -