TY - BOOK A1 - Ostermeyer, Martin A1 - Kappe, Philip A1 - Menzel, Ralf A1 - Sommer, S. A1 - Dausinger, Friedrich T1 - Laser drilling in thin materials with bursts of ns-pulses generated by stimulated Brillouin scattering (SBS) N2 - A passively Q-switched laser with a nonlinear mirror on the basis of stimulated Brillouin scattering (SBS), generates bursts of pulses with a few 10 ns pulse duration and a separation between 20-90 mu s. Percussion drilling and trepanning are performed in different materials with 1 mm thickness. The optimum parameter set of these pulse trains with regard to the burr height and ablation rate is investigated. Differences in the processing results between single pulse and multi pulse structures are discussed. In addition the laser allowed for transiently mode locked operation. Results for mode locked and merely Q-switched operation were compared Y1 - 2005 ER - TY - BOOK A1 - Ostermeyer, Martin A1 - Kappe, Philip A1 - Menzel, Ralf A1 - Wulfmeyer, Volker T1 - Diode-pumped Nd : YAG master oscillator power amplifier with high pulse energy, excellent beam quality, and frequency-stabilized master oscillator as a basis for a next-generation lidar system N2 - A pulsed, diode-laser-pumped Nd:YAG master oscillator power amplifier (MOPA) in rod geometry, frequency stabilized with a modified Pound-Drever-Hall scheme is presented. The apparatus delivers 33-ns pulses with a maximum pulse energy of 0.5 J at 1064 nm. The system was set up in two different configurations for repetition rates of 100 or 250 Hz. The beam quality was measured to be 1.5 times the diffraction limit at a pulse energy of 405 mJ and a repetition rate of 100 Hz. At 250 Hz with the same pulse energy, the M-2 was better than 2.1. The radiation is frequency converted with an efficiency of 50% to 532 nm. This MOPA system will be the pump laser of transmitters for a variety of high-end, scanning lidar systems. (C) 2005 Optical Society of America Y1 - 2005 ER - TY - BOOK A1 - Ostermeyer, Martin A1 - Brandenburg, Ingo T1 - Simulation of the extraction of near diffraction limited Gaussian beams from side pumped core doped ceramic Nd:YAG and conventional laser rods N2 - The application of the recently developed core doped ceramic Nd:YAG rods has the potential to provide better beam qualities compared to conventional rods since the hard aperture of the rod's boundary can be made wider while the width of the gain region remains the same. Thus, beam truncation and consequential diffraction can be reduced. We apply a finite elements model to calculate the resulting refractive index profiles in conventional and core doped rods. Propagating a Gaussian beam through both rod geometries the impact of aberrations and diffraction is compared for different side pumped scenarios. The potential advantage of the core doped geometry is discussed. (c) 2005 Optical Society of America Y1 - 2005 ER - TY - BOOK A1 - Freude, Ulrike A1 - Kuznetsov, Sergey P. A1 - Pikovskij, Arkadij T1 - Strange nonchaotic attractors : dynamics between order and chaos in Quasiperiodically Forced Systems Y1 - 2006 SN - 981-256633-3 PB - World Scientific CY - Singapore ER - TY - BOOK ED - Mikelskis, Helmut F. T1 - Physik-Didaktik : Praxishandbuch für die Sekundarstufe I und II Y1 - 2006 SN - 3-589-22148-8 PB - Cornelsen Scriptor CY - Berlin ER - TY - BOOK A1 - Rahmstorf, Stefan A1 - Schellnhuber, Hans Joachim T1 - Der Klimawandel T3 - Becksche Reihe Y1 - 2006 SN - 3-406-50866-9 VL - 2366 PB - Beck CY - München ER - TY - BOOK ED - Mikelskis-Seifert, Silke ED - Rabe, Thorid T1 - Physik Methodik : Handbuch für die Sekundarstufe I und II Y1 - 2007 SN - 978-3-589-22377-0 PB - Cornelsen CY - Berlin ER - TY - BOOK A1 - Barceló, Pedro T1 - Alexander der Große Y1 - 2007 SN - 978-3-89678-610-4 PB - Primus-Verl. CY - Darmstadt ER - TY - BOOK A1 - Gutlederer, Erwin Johann T1 - On the morphology of vesicles. - [überarb. Diss.] N2 - This dissertation contains theoretical investigations on the morphology and statistical mechanics of vesicles. The shapes of homogeneous fluid vesicles and inhomogeneous vesicles with fluid and solid membrane domains are calculated. The influence of thermal fluctuations is investigated. The obtained results are valid on mesoscopic length scales and are based on a geometrical membrane model, where the vesicle membrane is described as either a static or a thermal fluctuating surface. The thesis consists of three parts. In the first part, homogeneous vesicles are considered. The focus in this part is on the thermally induced morphological transition between vesicles with prolate and oblate shape. With the help of Monte Carlo simulations, the free energy profile of these vesicles is determined. It can be shown that the shape transformation between prolate and oblate vesicles proceeds continuously and is not hampered by a free energy barrier. The second and third part deal with inhomogeneous vesicles which contain intramembrane domains. These investigations are motivated by experimental results on domain formation in single or multicomponent vesicles, where phase separation occurs and different membrane phases coexist. The resulting domains differ with regard to their membrane structure (solid, fluid). The membrane structure has a distinct effect on the form of the domain and the morphology of the vesicle. In the second part, vesicles with coexisting solid and fluid membrane domains are studied, while the third part addresses vesicles with coexisting fluid domains. The equilibrium morphology of vesicles with simple and complex domain forms, derived through minimisation of the membrane energy, is determined as a function of material parameters. The results are summarised in morphology diagrams. These diagrams show previously unknown morphological transitions between vesicles with different domain shapes. The impact of thermal fluctuations on the vesicle and the form of the domains is investigated by means of Monte Carlo simulations. N2 - Die vorliegende Arbeit enthält theoretische Untersuchungen zur Morphologie und statistischen Mechanik von Vesikeln. Es wird die Gestalt homogener fluider Vesikel und inhomogener Vesikel mit fluiden und festen Membrandomänen berechnet. Der Einfluss thermischer Fluktuationen wird untersucht. Die erzielten Ergebnisse beziehen sich auf mesoskopische Längenskalen und basieren auf einem geometrischen Membranmodell, in welchem die Vesikelmembran als statische, beziehungsweise thermisch fluktuierende Fläche beschrieben wird. Die Arbeit besteht aus drei Teilen. Im ersten Teil werden homogene fluide Vesikel betrachtet. Das Interesse gilt dem thermisch induzierten Morphologieübergang zwischen prolaten und oblaten Vesikelformen. Mit Hilfe von Monte-Carlo-Simulationen wird ein freies Energieprofil für diese Vesikel ermittelt. Es kann gezeigt werden, dass die Formumwandlung zwischen prolaten und oblaten Formen kontinuierlich verläuft und mit keiner freien Energiebarriere verbunden ist. Der zweite und dritte Teil beschäftigt sich mit inhomogenen Vesikeln, die intramembrane Domänen enthalten. Ausgangspunkt und Motivation der Berechnungen sind experimentelle Studien über Domänbildung in ein- oder mehrkomponentigen Vesikelmembranen, bei denen Phasentrennung stattfindet und unterschiedliche Membranphasen koexistieren. Die dabei auftretenden Domänen unterscheiden sich hinsichtlich ihrer Membranstruktur (fest, fluid). Diese beeinflusst die Form der Domäne und des gesamten Vesikels auf entscheidende Weise. Im zweiten Teil werden Vesikel untersucht, bei denen feste und fluide Membrandomänen koexistieren, Teil drei widmet sich Vesikeln mit zwei koexistierenden fluiden Membranphasen. In Abhängigkeit von Materialparametern werden durch Minimierung der Membranenergie die Grundzustandsformen von Vesikeln mit einfachen und komplexen Domänenformen bestimmt. Die Ergebnisse werden in Morphologiediagrammen zusammengefasst. Dabei werden bisher unbekannte Morphologieübergänge zwischen Vesikeln mit unterschiedlichen Domänformen beobachtet. Die Auswirkungen thermischer Fluktuationen auf die Vesikel und die Form ihrer Domänen werden mittels Monte-Carlo-Simulationen untersucht. KW - Vesikel KW - Membran KW - Domänen KW - vesicle KW - membrane KW - domains Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15065 ER - TY - BOOK A1 - Jung, Carl Christoph T1 - Lichtinduzierte Generierung und Charakterisierung optischer Anisotropie. - [überarb. Diss.] N2 - Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen. N2 - The optical anisotropy of thin films is of great interest mainly in the display technology, the optical data storage and for optical security elements. The topic of this thesis was the theoretical and experimental investigation of three-dimensional anisotropy and especially the investigation of light-induced three-dimensional anisotropy in thin organic polymer films. The results and newly developed methods can contribute significantly to technical optimisation processes, e. g. for the compensation of the viewing angle dependence of liquid crystal displays. The new method of immersion-transmission-ellipsometry (ITE) for the investigation of thinner layers was developed in the course of this PhD. The new method allows to determine the absolute three-dimensional refractive indices of a biaxial film. For the first time it has been possible to determine the three-dimensional indicatrix of transparent, 150 nm thin films with an accuracy of three digits after the decimal point. The ITE-method therefore has the potential to be used for the investigation of even thinner films. The light-induced generation of three-dimensional anisotropy was investigated in thin films of azobenzene-containing and cinnamate containing, amorphous and liquid crystalline homo- and copolymers. For the first time, quantitative investigations of the changes of light-induced, three-dimensional anisotropies in thin films of azobenzene containing and cinnamate containing polymers, that were brought about by annealing above the glass transition temperatures, were carried out. For many of the investigated polymers the three-dimensional order after irradiation with polarised light and subsequent annealing above the glass transition temperature seemed to be dependent on the film thickness. The reason could be the planar initial order of the spin-coated thinner films, which was detected with the new ITE-method. For the characterisation of tilt gradients in thicker polymer films a special method using waveguide spectroscopy was developed. Quantum chemically determined maximal values of inducible birefringence were compared with the experimentally determined values. KW - Anisotropie KW - Photoorientierung KW - Photoalignment KW - dünne Schichten KW - 3D KW - Ellipsometrie KW - Kompensatoren KW - Wellenleiter KW - Displays KW - Fluoreszenz KW - anisotropy KW - photo-orientation KW - photoalignment KW - thin films KW - 3D KW - ellipsometry KW - compensation films KW - waveguides KW - displays KW - fluorescence Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001501 ER -